The Benchmark for Banknote Packaging in the High-Speed World
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Shrink Wrap Packaging
Shrink Wrap Packaging Versatile Shrink Wrap Solutions pacmachinery.com Shrink Packaging Basics Shrink packaging encapsulates a product with- in a tightly adhering layer of film. The process may Clamco 6800CS Side Sealer be accomplished by hand, or by using automatic or Intermittent motion, automatic side seal shrink wrapper semi-automatic packaging equipment. Creating a that offers exceptional return on investment. strong seal in the film is the first step. To achieve this, a hot knife or hot wire is pressed against the film to weld the seal together. The seal process has three variables: time, temperature, and pressure. Each may be adjusted to suit different film types. Once sealed in a film envelope, the package is passed through a heated shrink tunnel. When heated, the film softens and expands, and as the film cools it shrinks tight. The package exits the tunnel wrapped in a taught, secure, attractive film. There are several films from which you may Clamco 6700GLX Automatic L-Bar Sealer choose. Polyethylene is often used for bulk packaging; Outstanding speed, throughput and performance. Sealer Polyolefin is common in retail applications where allows for fast setup, alignment, and product transfer. crystal clarity is important. Polyvinyl Chloride (PVC) can be used as a pre-formed sleeve that is placed around a package and shrinks to conform. Ideal for bundling multiple parts in one secure package, shrink wrapping enhances visual appeal, maintains quality, and protects against tampering. Specifications 6700GLX 6800CS Speed (up to) 40 pkg/min 70 pkg/min Seal length (side) 18” 19.75” Seal length (front) 23” unlimited Maximum film width 23” 23.5” Maximum product height 7.5” 7.85” Sleve Wrappers Automatic Shrink Systems 7002ASW Automatic Sleeve Wrapper With ever-increasing production demands, Clamco This versatile automatic, sleeve wrapper-bundler can be used for meets the need with a family of automatic, high-speed, wrapping a wide range of products, from trays to cartons or bottles. -
Shrink Wrap Outer Packaging
GREEN FEATURES Fact Sheet Shrink Wrap Outer Packaging Introduction interference, our manufacturing Life Technologies is committed facility in Warrington, UK, has been to designing products with the shrink wrapping our kits (Figure 1). environment in mind—it’s one more step toward a smaller footprint. By This shrink wrap consists of linear removing the polyolefin shrink wrap low density polyethylene (LLDPE). Green Benefits from some of our products, we can This practice used 950 kg of LLDPE • Less use of non-renewable resources eliminate the material consumption shrink wrap film annually. Due to • Less waste disposal associated with the manufacture of the limited disposal alternatives this plastic and reduce the amount available for this particular material, of waste going to landfills and we presume most, if not all, of this incinerators. This fact sheet provides shrink wrap is scrapped as waste the documentation behind these and not recycled. To minimize the environmental claims. environmental impact of the film, we have replaced it with a small tamper- Product Description proof seal (Figure 2) that fits over the To help ensure products arrive kit container closure tab and can be intact and without any unintended recycled with the kit box. Figure 1. Before: packaged in shrink wrap Figure 2. After: packaged with a simple tamper-proof seal Green Features Reduced Consumption of Non-renewable Resources Based on Lifecycle Inventory (LCI) Data from Plastics Europe’s Eco-profile programme1,2, we estimate that by eliminating the use of 950 kg -
Frequently Asked Questions Coins and Notes July 2020
Frequently Asked Questions Coins and Notes July 2020 A. Currency Issuance 1. Under what authority does the Bangko Sentral ng Pilipinas (BSP) issue currency? The BSP is the sole government institution mandated by law to issue notes and coins for circulation in the Philippines. In Particular, Section 50 of Republic Act (R.A) No. 7653, otherwise known as The New Central Bank Act, as amended by Republic Act No. 11211, stipulates that the BSP shall have the sole power and authority to issue currency within the territory of the Philippines. It also issues legal tender commemorative notes and coins. 2. How does the BSP determine the volume/value of notes and coins to be issued annually? The annual volume/value of currency to be issue is projected based on currency demand that is estimated from a set of economic indicators which generally measure the country’s economic activity. Other variables considered in estimating currency order include: required currency reserves, unfit notes for replacement, and beginning inventory balance. The total amount of banknotes and coins that the BSP may issue should not exceed the total assets of the BSP. 3. How is currency issued to the public? Based on forecast of currency demand, denominational order of banknotes and coins is submitted to the Currency Production Sub-Sector (CPSS) for production of banknotes and coins. The CPSS delivers new BSP banknotes and coins to the Cash Department (CD) and the Regional Operations Sub-Sector (ROSS). In turn, CD services withdrawals of notes and coins of banks in the regions through its 22 Regional Offices/Branches. -
Recyclability in a View
Recyclability in a View Make the most informed labelling and packaging decision for greater sustainability. Here is an overview of different labelling technologies, the recyclability of various packaging materials, and the global trend in plastic packaging to help you make the right choice. Avery Dennison ClearIntent™ portfolio contains hundreds of products that help reduce material consumption and landfill waste. Benefits of PS labels versus other labelling technologies + No backing liner waste + Easiest separation due to small adhesion zone − Limited material options, lower quality look & feel − Hotmelt contaminant Wrap-around + No backing liner waste + Perforations can be added to provide manual sorting + Container lightweighting / recycled content color Pressure Sensitive variation Labels − 360 coverage impacts optical sorting process − Traditional PETG and PVC sleeves do not separate + CleanFlake™ solution enhances the Shrink Sleeve through PET recycling process (sink / float) recyclability of PET containers by enabling a clean separation duing + No backing liner waste the recycling process − Limited to paper face - can disintegrate and contaminate recycling wash water + Materials from renewable resources − Not proven through plastic recycling process available for facestocks and liners (only glass) Wet Glue + Bio-sourced, compostable, biodegradable materials readily + No backing liner waste available + Single polymer plastic makes recycling easier (container and label are PP) + Liner and matrix recycling programs − Limited availability -
Operating, Field Maintenance, and Parts Manual Model 998 Metric CE Thank You for Choosing Shrinkfast Products
Operating, Field Maintenance, and Parts Manual Model 998 Metric CE Thank you for choosing Shrinkfast products. Please visit us on the web at www.shrinkfast998.com for our latest product information and updates. Customer Service Issues: Before returning any Shrinkfast product, please call: (603)863-7719 Email at www.shrinkfasttools.com SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS GENERAL SAFETY PRECAUTIONS & CE SAFETY CERTIFICATION .....................pages 2-4 REGULATOR OPERATION & MAINTENANCE ............................................................ pages 5-8 STARTING THE HEAT TOOL ............................................................................................ page 8 REGULATOR MAINTENANCE & SAFETY FEATURES ......................................... pages 9-10 EXCESS FLOW DEVICE .................................................................................................... page 9 CHOOSING THE CORRECT PROPANE TANK ....................................................... pages 11-12 TANK PRESSURE, TEMPERATURE & OPERATION ............................................ pages 13-14 VENTILATION REQUIREMENTS .................................................................................. page 15 GENERAL INFORMATION ON SHRINK FILM & SHRINK BAGS ...................... pages 16-17 SHRINK WRAPPING TECHNIQUES (PALLET BAGS & ODD SHAPED OBJECTS)........ pages 18-22 PRINCIPLES OF OPERATION .................................................................................. pages 23-25 OPERATING OVERVIEW .......................................................................................... -
Mick-Vort-Ronald-Books.Pdf
AUSTRALIAN PAPER CURRENCY PUBLICATIONS by Michael P. Vort-Ronald . Period Title Year Pages Hard $ Soft $ Post $ 1803-1826 Aust. Colonial Promissory Notes 2nd 2012 136 36 5 1817-1914 Banks of Issue in Australia (Pvt. notes) 1982 331 30 20 15 (SA 12) 1817-1910 Aust. Private Banknote Pedigrees 2011 268 49 15 (SA 12) 1850-1950 Aust. Shinplasters, Calabashes 2nd ed. 2007 132 25 5 1850-2013 Australian Misc. & Political notes 2nd. 2013 144 36 5 1910-1914 Australian Superscribed Notes 2008 104 22 5 1913-1966 Australian Banknotes (£) 2nd ed. 1983 344 35 20 15 (SA 12) 1913-2012 Australian Specimen Banknotes 2nd ed. 2013 160 39 15 (SA 12) 1966-1997 Australian Decimal Banknotes 2nd ed 1995 416 49 39 15 (SA 12) 1975-2004 Aust. Banknote Pedigrees (sales 72-04) 2005 508 89 69 15 (SA 12) 1975-2014 2nd edition ₤ series $75, Decimal series 2016 188 42 15 (SA 12) 2006 and 7 Australian Banknote Sales 2005, 6 and 2007 ea 22 ea 5 2008-2013 Australian Banknote Sales 2010 to 2015 ea 27 ea 5 1988-2001 Aust. Modern Numismatic Banknotes 2014 116 30 5 1988-2011 Vort-Ronald Aust. Note Collections 2011 150 36 5 1975-2012 Australian Banknote Errors 2013 200 44 15 (SA 12) 2012-2014 Vort-Ronald in CAB magazine 2015 148 36 5 BANKNOTE ALBUM INTERLEAVES (for existing Lighthouse Vario albums) 1910-2009 Superscribed, uncut pairs, prefixes, polymer 4 th ed. ea 20 5 1913-1966 Australian Banknote Album (£) 2005 64 15 (SA 12) 1966-1996 Decimal Banknote Album (paper) 2007 54 15 (SA 12) 1988-2005 Specialist Album, red and black 2006 40 15 (SA 12) 1994-2000 Annually Dated, red and black 2006 25 5 Vario banknote clear pages ($1.50) each. -
Federal Reserve Bank of Chicago
Estimating the Volume of Counterfeit U.S. Currency in Circulation Worldwide: Data and Extrapolation Ruth Judson and Richard Porter Abstract The incidence of currency counterfeiting and the possible total stock of counterfeits in circulation are popular topics of speculation and discussion in the press and are of substantial practical interest to the U.S. Treasury and the U.S. Secret Service. This paper assembles data from Federal Reserve and U.S. Secret Service sources and presents a range of estimates for the number of counterfeits in circulation. In addition, the paper presents figures on counterfeit passing activity by denomination, location, and method of production. The paper has two main conclusions: first, the stock of counterfeits in the world as a whole is likely on the order of 1 or fewer per 10,000 genuine notes in both piece and value terms; second, losses to the U.S. public from the most commonly used note, the $20, are relatively small, and are miniscule when counterfeit notes of reasonable quality are considered. Introduction In a series of earlier papers and reports, we estimated that the majority of U.S. currency is in circulation outside the United States and that that share abroad has been generally increasing over the past few decades.1 Numerous news reports in the mid-1990s suggested that vast quantities of 1 Judson and Porter (2001), Porter (1993), Porter and Judson (1996), U.S. Treasury (2000, 2003, 2006), Porter and Weinbach (1999), Judson and Porter (2004). Portions of the material here, which were written by the authors, appear in U.S. -
Why Can't All Plastics Be Recycled?
Why can’t all plastics be recycled? Plastic has become prevalent because it is inexpensive and it can be engineered with a wide range of properties. Plastics are strong but lightweight, somewhat resistant to being degraded by chemicals, sunlight, and bacteria, and are thermally and electrically insulating. What does the symbol mean? A chasing arrows symbol, or resin code, does not mean that a plastic container is recyclable. Most plastic containers are marked with the chasing arrows symbol ‐ number one through seven in the center. The number inside the arrows signifies the main chemical compound used to make that plastic container. Unfortunately, the symbol does not mean that plastic container can be recycled. There are seven resin codes used inside the chasing arrow symbols: 1. PETE Polyethylene Terephthalate is in pop and water bottles. Please recycle. 2. HDPE High Density Polyethylene is opaque and usually in bottles that store laundry detergent and milk. These are usually recyclable. 3. V Polyvinyl Chloride (PVC) is found in plastic pipes, shrink wrap. 4. LDPE Low Density Polyethylene is in produce bags, plastic wrap, and plastic bags. 5. PP Polypropylene is used for yogurt tubs, ketchup bottles. 6. PS Polystyrene is found in Styrofoam, used for egg crates. 7. Other This category covers a vast mixture of resins and includes food containers (clam shells), polycarbonate used in sport bottles, and bio‐based plastic used in compostable food containers. Why don’t we recycle all these plastics? Most cities collect #1 and #2 types of plastic, or the plastic bottles made from PETE/PET and HDPE resin. -
Supplier Packaging Guidelines Hyster-Yale Group
Page 1 of 26 Supplier Packaging Guidelines For Locations in North America Hyster-Yale Group Revision 2 October 21, 2016 This is a controlled document with the electronic read-only domain, accessed from the HYG Master Index. Any person in possession of a printed copy of this parent document, or cited appendices, has an uncontrolled copy and should refer to the Master Index or approved web site for revision level status. ©Hyster-Yale Group, Incorporated. All rights reserved. DCN 36243 Rev. 2 Effective Date: 21 October 2016 HYG Supplier Packaging Guidelines Page 2 of 26 Table of Contents 1 INTRODUCTION ............................................................................................................................ 4 1.1 SCOPE .................................................................................................................................... 4 1.2 PURPOSE ............................................................................................................................... 4 2 ACCEPTABLE PACKAGING ............................................................................................................. 4 2.1 EXPENDABLE PACKAGING ...................................................................................................... 4 2.1.1 BAGS ............................................................................................................................... 4 2.1.2 CORRUGATED CARTONS ................................................................................................. 5 2.1.2.1 -
Estimation of Euro Currency in Circulation Outside the Euro Area1
EXTERNAL STATISTICS DIVISION ECB-PUBLIC 6 April 2017 ETS/2017/091 Estimation of euro currency in circulation 1 outside the euro area 1. Introduction Recent empirical evidence on currency in circulation has shown a significant inconsistency between total currency in circulation and the estimates of holdings in various statistical domains.2 Some of the evidence points to the European Central Bank (ECB) estimate of euro currency circulating outside the euro area as a prominent cause of this inconsistency.3 In this context, in 2015 and 2016 the European System of Central Banks (ESCB) discussed alternative methods for the estimation of circulation outside the euro area. A new methodology was approved in December 2016 and introduced on 6 April 2017 with the release of quarterly balance of payments (b.o.p.) and international investment position (i.i.p.) statistics for the last quarter of 2016. The following sections present and explain the new methodology used to estimate euro currency holdings by non-euro area residents. 2. New estimation method: lower and upper bounds Given the large variability in the results of the various estimation methods tested and discussed by the ESCB Statistics Committee (STC) in 2016, it was decided to continue using a linear combination of two methods rather than selecting a single method. Two estimates have been chosen to set boundaries to circulation outside the euro area by establishing a lower limit (an estimate of minimum circulation under certain reasonable assumptions on not observable data) and an upper limit (an estimate of a maximum circulation, also on under certain assumptions). -
Table of Contents
1 TABLE OF CONTENTS Heat Shrink Wrap 4 - 16 Polyole n Shrink Rolls 5 - 11 Polyole n Shrink Bags 11 PVC Shrink Rolls 12 - 13 Polyethylene Shrink Bundling Rolls 13 PVC Shrink Tubing 14 PVC Shrink Bags 15 - 16 Shrink Wrap Machines 17 - 30 Heat Sealers 18 -19 Heat Guns 19 I Bar Sealers 20 - 21 L Bar Sealers 21 - 23 Chamber Shrink Wrap Machines 24 - 25 Combo Shrink Wrap Machines 25 - 27 Shrink Tunnels 27 - 30 Shrink Bundling Machines 31 - 32 Shrink Bundling Tunnel 32 Auto Shrink Bundler Combo 33 - 34 Conveyors 35 - 36 Rotary Conveyors 35 Skatewheel Conveyors 36 Gravity Conveyors 36 Belted Infeed Conveyors 37 3ft. Belted Infeed Conveyors 37 6ft. Belted Infeed Conveyors 37 Pallet Stretch Film 39-53 Hand Stretch Film 40 - 44 Extended Core Stretch Film 44 - 45 Bundling Stretch Film 46 - 47 Machine Stretch Film 48 - 53 Stretch Film Dispensers 54 - 55 Stretch Wrap Machines 56 - 64 Packaging Tape 65 - 69 Hand Packaging Tape 63 - 67 Tape Dispensers 68 Machine Packaging Tape 69 Tape Machines 70 3 1-800-441-5090 | 4781 Highway 319 West · Austin, Arkansas 72007 TABLE OF CONTENTS Strapping 71-76 Machine Polypro Strapping 72 - 73 Hand Polypro Strapping 74 Hand Polyester Strapping 75 Strapping Kit/Buckles 76 Strapping Machines 77 - 78 Laundry Film 79 Laundry Wrapping Machine 80 Perforated Plastic Cling & Shrink Rolls 81 - 82 Poly Bags & Tubing 83 - 96 Poly Bags 84 - 93 Poly Tubing 94 - 96 Poly Sheeting 97 - 98 Pallet Covers 99 - 100 Vacuum Packaging 101 - 112 Vacuum Bags 102 - 105 Black Vacuum Bags 106 Vacuum Zipper Bags 107 Notched Vacuum Bags 107 Meat Vacuum Bags w/Black Background 108 3 Mil Vacuum Tubing 108 Vacuum Sealers 110 - 112 Food Packaging 113 - 116 Aluminum Foil Rolls & Sheets 113 - 116 Food Cling Wrap 117 Meat Film & Machines 118 - 119 4 1-800-441-5090 | 4781 Highway 319 West · Austin, Arkansas 72007 POLYOLEFIN SHRINK WRAP What is Polyole n? (Poly·ole· n) is a plastic polymer, the root word ole n refers to any member of the alkene series. -
Lithium Battery: Fully Regulated Packaging & Shipping Instructions
Lithium Battery: Fully Regulated Packaging & Shipping Instructions Large volume lithium shipments weighing 66 lbs. or more require specific criteria to ship. Collections of this size are considered “fully regulated” by the Department of Transportation. Correctly Packaged Large Volume Lithium Batteries 1. Prepare Shipment 2. Package Pallet 3. Label & Ship Contact Battery Solutions for Protect terminals of each battery. Attach appropriate labels to recycling authorization tracking Pack with cushioning material in outermost layer of shrink wrap. number. Begin to build shipment on lined drum. Label individual drum. 40” by 48” pallet. • No lithium batteries that are bloated or damaged • Available UN Lithium Numbers: • Protected terminals • UN3480 Lithium Ion Batteries • Drum is lined • UN3481 Lithium Ion Batteries contained in equipment • Cushioning material is properly distributed • UN3090 Lithium Metal Batteries • Drum locking ring seated and fully locked • UN3091 Lithium Metal Batteries contained in • Proper labeling on individual drum equipment • Shrink wrapped to pallet – many layers of shrink wrap to avoid shifting during shipment • It is not possible to have too much shrink wrap or • Overpack correctly labels banding to secure the material to the pallets. • A general rule would be once you think you have it wrapped –add six more revolutions of wrap. Incorrectly Packaged Large Volume Lithium Batteries • Improperly protected terminals • Mixed battery chemistries without special permit • Insufficient banding • Insufficient shrink wrap • No labeling • Oversized or overheight pallet 800.852.8127 | batterysolutions.com [email protected] F-19034 Lithium: Fully Regulated Packaging & Shipping Instructions 07/17/2020 R2 Lithium Battery: Fully Regulated Packaging & Shipping Instructions 800.852.8127 | batterysolutions.com [email protected] These instructions must be followed exactly.