Liebig Condensers Are a Simple Condenser Design Used to Cool and Condense Hot Vapor As Part of a Distilling Apparatus

Total Page：16

File Type：pdf, Size：1020Kb

Liebig Condensers Are a Simple Condenser Design Used to Cool and Condense Hot Vapor As Part of a Distilling Apparatus

Liebig Condensers Model No: DIGC01 Make : DIDAC Specification: Liebig condensers are a simple condenser design used to cool and condense hot vapor as part of a distilling apparatus. This 300 mm condenser has a straight inner tube that the condensing vapor passes through and a large outer jacket that cooling water passes through. Features: Material: Glass Color: Clear Approx Jacket Length: 400mm Approx Overall Height: 550mm Neck Type: Joints Interchangeable Socket Joint: 24/ 29 Interchangeable Cone Joint: 24/ 29 Note: Specifications and design are subject to change without prior notice. Order Coil Condensor Model No: DIGC02 Make : DIDAC Specification: Material : Glass Color: Transparent Application: Chemical laboratory Pack Type: Box Reusable: Yes Product Connector Socket size Cone size Pack size Effective length DIGC02 Glass 19/26 19/26 1 200 mm DIGC02/1 Glass 24/29 24/29 1 200 mm DIGC02/2 Glass 34/35 34/35 1 350 mm DIGC02/3 Glass 34/35 34/35 1 450 mm DIGC02/4 Glass 34/35 34/35 1 600 mm DIGC02/5 Screw Thread 19/26 19/26 1 200 mm DIGC02/6 Screw Thread 24/29 24/29 1 200 mm DIGC02/7 Screw Thread 34/35 34/35 1 350 mm DIGC02/8 Screw Thread 34/35 34/35 1 450 mm DIGC02/9 Screw Thread 34/35 34/35 1 600 mm Note: Specifications and design are subject to change without prior notice. Order Air Condenser Model No: DIGC03 Make : DIDAC Specification: Material : Glass Color: Transparent Application: Chemical laboratory Pack Type: Box Reusable: Yes Joints size: 24/29 Total Length: 420mm Note: Specifications and design are subject to change without prior notice. Order Allihn Condenser Model No: DIGC04 Make : DIDAC Specification: Glass Allihn Condenser,Ball Shape Heat Exchanger, Lab Glassware 24/29,200mm, Made from glass Alihhm condenser ,with 10mm hose connection. With 24/29 joints, the jacket length is 200mm. Note: Specifications and design are subject to change without prior notice. Order Vigreux Glass Condenser Model No: DIGC05 Make : DIDAC Specification: Material : Glass Color: Transparent Application: Chemical laboratory Pack Type: Box Reusable: Yes Joints size: 24/29 Total Length: 420mm Note: Specifications and design are subject to change without prior notice. Order .

Copy Link

Recommended publications

Single Pass Cooling Systems
A Sustainable Alternative to Single Pass Cooling Systems Amorette Getty, PhD Co-Director, LabRATS What is Single Pass Cooling? ● Used for distillation/reflux condensers, ice maker condensers, autoclaves, cage washers… ● Use a continuous flow of water from faucet to sewer o 0.25-2 gallons per minute, o up to 1,000,000 gallons of water/year if left on continuously Single Pass Cooling: Support ● “U.S. Environmental Protection Agency has ranked the elimination of single-pass cooling systems #4 on its list of top ten water management techniques” -Steve Buratto, Chair of Chemistry and Biochemistry department NOT Just a Sustainability Issue! California Nanosystems Institute (CNSI) flood in a second-floor laboratory in July, 2014. Water ran at ~1-2 gallons per minute for 6-10 hours, overflowing into a ground floor electron microscopy lab CNSI Flood Losses ● $ 2.2 Million in custom built research equipment ● Research shutdown for 4 months ● over 200 hours of staff time ● Insurance no longer covering this type of incident again Campus Responses to the Incident • CNSI ban on single pass cooling systems • TGIF grant financial incentive for optional change of single replacement systems • Chemistry and Material Research Laboratory (MRL) • Additional Grants being sought • Conversation at Campus and UC-level to regulate and replace these types of systems. Seeking Allies… ● “The replacement of single-pass cooling systems with closed-loop and water free systems would save water and represent a major advance in the sustainability efforts of the campus.” -Steve Buratto, Chair of Chemistry and Biochemistry department Barriers to Replacement ● “...major obstacle to replacing the single-pass cooling systems with closed-loop and water- free systems is cost.
[Show full text]
22 Bull. Hist. Chem. 8 (1990)
22 Bull. Hist. Chem. 8 (1990) 15 nntn Cn r fr l 4 0 tllOt f th r h npntd nrpt ltd n th brr f th trl St f nnlvn n thr prt nd ntn ntl 1 At 1791 1 frn 7 p 17 AS nntn t h 3 At 179 brr Cpn f hldlph 8Gztt f th Untd Stt Wdnd 3 l 1793 h ntr nnnnt rprdd n W Ml "njn h Cht"Ch 1953 37-77 h pn pr dtd 1 l 179 nd nd b Gr Whntn th frt ptnt d n th Untd Stt S M ntr h rt US tnt" Ar rt Invnt hn 199 6(2 1- 19 ttrfld ttr fnjn h Arn hl- phl St l rntn 1951 pp 7 9 20h drl Gztt 1793 (20 Sptbr Qtd n Ml rfrn 1 1 W Ml rfrn 1 pp 7-75 William D. Williams is Professor of Chemistry at Harding r brt tr University, Searcy, Al? 72143. He collects and studies early American chemistry texts. Wyndham D. Miles. 24 Walker their British cultural heritage. To do this, they turned to the Avenue, Gaithersburg, MD 20877, is winner of the 1971 schools (3). This might explain why the Virginia assembly Dexter Award and is currently in the process of completing the took time in May, 1780 - during a period when their highest second volume of his biographical dictionary. "American priority was the threat of British invasion following the fall of Chemists and Chemical Engineers". Charleston - to charter the establishment of Transylvania Seminary, which would serve as a spearhead of learning in the wilderness (1).
[Show full text]
HORIZONTAL BOTTLE COOLER EBC Series Model: EBC50
Project Name: HORIZONTAL BOTTLE COOLER Project Location: Model #: Quantity: Available Warehouse: EBC Series Model: EBC50 Refrigeration System ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. Cabinet Construction ∙ Heavy duty stainless steel countertop and rails with textured laminate, black vinyl exterior. ∙ Open spaced interior with no walls between compartments. ∙ Galvanized steel interior. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Built-in caster thread receptacles for all models. Lighting ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. Bottle Cap Opener ∙ Front mounted bottle cap opener and cap catcher are removable for ease of cleaning. Lids ∙ Heavy duty stainless steel exterior and galvanized steel interior. ∙ 3/4" thick high density polyurethane insulation. ∙ Removable ratchet locks keep your items safe from theft. Shelving ∙ Horizontal epoxy coated, steel wire shelves for bottom air circulation (see table for quantity).
[Show full text]
LSC- DTS Laboratory Sample Condenser
Quality System Certified ISO 9001 LSC-DTS Sample Condenser Rev.2.doc Page 1 of 1 LSC- DTS Laboratory Sample Condenser LSC- DTS Laboratory Sample Condenser This LSC unit range of stainless steel tube shaft sterile heat exchangers with Double Tube Sheet (DTS) have been designed to allow Clean Steam (CS) and Water For Injection (WFI) samples to be taken quickly and easly whilst mantaining a sterile testing environment. LSC are ideal to be mounted at the sampling point and can be operated with either mains or chilled water as the cooling medium. Availability of aseptic sample valve allow fine control of sample flow during testing The LSC can be sterilised in situ-on-line, thus ensuring continuity of samples regardless of testing frequency, ideal for fluids in pharmaceutical and purity systems applications. Typical applications: Steam sampling In-line conductivity monitoring Point of use cooling Feature offered by the unit include: AISI 316L (1.4404) stainless steel construction Double Tube Sheet (DTS) Meets FDA and 3A specifications Full material traceability Self draining design Compact, easy to install Fully sterilisable/autoclavable Sample Condenser operation The medium to be condensed/cooled passes throught the tube side. Typically a regulating valve will be used to throttle the sample medium flow. Cooling water is channelled countercurrent inside the shell in order to ensure maximum efficiency. The heat energy of the sample medium is absorbed by the flowing cooling water, resulting in a drop in the sample temperature. Where steam is the sample medium, the cooling water will firstly absorb the steam’s latent heat content, condensing it back to water.
[Show full text]
Grignard Synthesis of Triphenylmethanol Reactions That Form Carbon-Carbon Bonds Are Among the Most Useful to the Synthetic Organic Chemist
1 Experiment 12: Grignard Synthesis of Triphenylmethanol Reactions that form carbon-carbon bonds are among the most useful to the synthetic organic chemist. In 1912, Victor Grignard received the Nobel prize in chemistry for his discovery of a new series of reactions that result in the formation of a carbon-carbon bond. A Grignard synthesis first involves the preparation of an organomagnesium reagent via the reaction of an alkyl bromide with magnesium metal: δ– δ+ R Br + Mg R MgBr The resulting “Grignard reagent” acts as both a good nucleophile and a strong base. Its nucleophilic character allows it to react with the electrophilic carbon in a carbonyl group, thus forming the carbon-carbon bond. Its basic property means that it will react with acidic compounds, such as carboxylic acids, phenols, thiols and even alcohols and water; therefore, reaction conditions must be free from acids and strictly anhydrous. Grignard reagents will also react with oxygen to form hydroperoxides, thus they are highly unstable when exposed to the atmosphere and are generally not isolated from solution. For a variety of reasons, anhydrous diethyl ether is the solvent of choice for carrying out a Grignard synthesis. Vapors from the highly volatile solvent help to prevent oxygen from reaching the reaction solution. In addition, evidence suggests that the ether molecules actually coordinate with and help stabilize the Grignard reagent: Et Et O R Mg Br O Et Et The magnesium metal used in the synthesis contains a layer of oxide on the surface that prevents it from reacting with the alkyl bromide. The pieces of metal must be gently scratched while in the ether solution to expose fresh surface area so that the reaction can commence.
[Show full text]
CHEM 344 Distillation of Liquid Mixtures
CHEM 344 Distillation of liquid mixtures 1. Distillation basics The vaporization of a liquid and condensation of the resulting vapor is the basis of distillation. Organic liquids containing small amounts (<15%) of impurities or non-volatile substances are easily purified by simple distillation, as are liquid mixtures where the difference in boiling point of the components is >70 oC. Fractional distillation is more useful for separating mixtures of liquids where the boiling points of the components differ by <70 oC (see later). A typical simple distillation setup is shown in Figure 1. It consists of a flask containing the liquid to be distilled, an adapter to hold a thermometer and to connect the flask to a water-cooled condenser, and a flask to hold the condensed liquid (the distillate). Figure 1: Apparatus for a simple distillation. 1.1 The distillation flask The distillation flask is a round-bottom flask. The liquid to be distilled should fill the distillation flask to ~50-60% of its capacity. To promote even heating of the liquid, a boiling chip or a magnetic stir bar is added before heat is applied to the distillation flask. The irregular chips provide sites for bubbles of vapor to form, or alternatively the liquid is agitated with the magnetic stirrer as it is being heated. Never add a boiling chip or a stir bar to a hot liquid! Doing so can cause a seemingly calm liquid to boil suddenly and violently. 1 1.2 The distilling adapter The adapter connects the distillation flask, the condenser, and the thermometer. This type of adapter is often referred to as a distillation head.
[Show full text]
Laboratory Equipment Used in Filtration
KNOW YOUR LAB EQUIPMENTS Test tube A test tube, also known as a sample tube, is a common piece of laboratory glassware consisting of a finger-like length of glass or clear plastic tubing, open at the top and closed at the bottom. Beakers Beakers are used as containers. They are available in a variety of sizes. Although they often possess volume markings, these are only rough estimates of the liquid volume. The markings are not necessarily accurate. Erlenmeyer flask Erlenmeyer flasks are often used as reaction vessels, particularly in titrations. As with beakers, the volume markings should not be considered accurate. Volumetric flask Volumetric flasks are used to measure and store solutions with a high degree of accuracy. These flasks generally possess a marking near the top that indicates the level at which the volume of the liquid is equal to the volume written on the outside of the flask. These devices are often used when solutions containing dissolved solids of known concentration are needed. Graduated cylinder Graduated cylinders are used to transfer liquids with a moderate degree of accuracy. Pipette Pipettes are used for transferring liquids with a fixed volume and quantity of liquid must be known to a high degree of accuracy. Graduated pipette These Pipettes are calibrated in the factory to release the desired quantity of liquid. Disposable pipette Disposable transfer. These Pipettes are made of plastic and are useful for transferring liquids dropwise. Burette Burettes are devices used typically in analytical, quantitative chemistry applications for measuring liquid solution. Differing from a pipette since the sample quantity delivered is changeable, graduated Burettes are used heavily in titration experiments.
[Show full text]
Simple Apparatus for Cleaning Laboratory Ware Used in Trace Analysis
Simple apparatus for cleaning laboratory ware used in trace analysis E. BEINROHR and M. ČAKRT Department of Analytical Chemistry, Faculty of Chemical Technology, Slovak Technical University, CS-81237 Bratislava Received 16 June 1988 A simple cleaning apparatus made of glass and teflon (PTFE) is de scribed and characterized. It is suitable for an efficient and rapid cleaning of small test tubes, volumetric flasks, crucibles, etc. made of glass, quartz, PTFE, glassy carbon. The cleaning effect arises from a continuous contact of hot vapours and condensates of the cleaning liquids (hydrochloric acid, nitric acid, water) with the inside of the air-cooled laboratory ware. The cleaning efficiency was tested by cleaning intentionally contaminated quartz test tubes and volumetric flasks. Описан и охарактеризован простой моющий аппарат из стекла и политетрафторэтилена (ПТФЭ). Он годится для эффективного и быс трого мытья небольших пробирок, волюмометрических колб, тиглей и т.п., изготовленных из стекла, кварца, ПТФЭ или стекловидного углерода. Моющий эффект возникает благодаря продолжительному контакту горячих паров и конденсатов моющих жидкостей (соляной кислоты, азотной кислоты, воды) с внутренней поверхностью возду хом охлаждаемой лабораторной посуды. Эффективность мытья была проверена посредством очистки сильно загрязненных кварцевых пробирок и волюмометрических колб. The accuracy of results in trace analysis can be seriously influenced by contamination of the sample during the analytical procedure. The most signifi cant contamination sources are reagents, airborne dust, containers, laboratory ware, and the analyst [1—3]. The contamination caused by the laboratory ware and containers is due to the desorption or leaching of elements from the surface of these vessels when being in contact with the sample and reagent solutions.
[Show full text]
Building a Still at Low Cost Riku
Building a still at low cost Riku Building a still at low cost Practical guide for building gadgets + few new ideas. Version 0.7-02.02.2005 By Riku – [email protected] v0.7-02.02.2005 web download 1 Building a still at low cost Riku Introduction....................................................................................................................................3 A still..............................................................................................................................................4 How to make a cheap boiler............................................................................................................5 Pot still heads/condensers................................................................................................................9 Water-cooled:..............................................................................................................................9 Air-cooled:................................................................................................................................12 Reflux stills...................................................................................................................................14 Columns....................................................................................................................................14 Size of a column – size does matter...........................................................................................14 Packing.....................................................................................................................................15
[Show full text]
The Museum of Early Philosophical Apparatus at Transylvania University
Bulletin of the History of Chemistry, 1991, 8, 22-27. CHEMICAL ARTIFACTS: THE MUSEUM OF EARLY PHILOSOPHICAL APPARATUS AT TRANSYLVANIA UNIVERSITY George M. Bodner Department of Chemistry, Purdue University Introduction In March, 1775, Colonel Richard Henderson purchased 20 million acres from the Cherokees in an unsettled region of the British colony of Virginia then known as "Kan-tuck- ee" and hired Daniel Boone to mark a permanent trail into this territory [1]. In May of the same year, the legislature that was assembled to organize a government for the new country voted to name it Transylvania (literally: across the woods), perhaps because the Romans had used this name to describe a region of eastern Europe that also lay beyond a great forest [2]. When news of this purchase reached the Virginia assembly, it was declared illegal because this body had reserved the right to extinguish Indian title to lands within its borders. Between 1775 and 1800, however, 150,000 people crossed through the Cumberland Gap and traveled down Boone's Wilderness Road into the region that the Virginia assembly eventually established as Kentuckee county. One of the problems colonists faced was that of preserving their British cultural heritage. To do this, they turned to the schools [3]. This might explain why the Virginia assembly took time in May, 1780 — during a period when their highest priority was the threat of British invasion following the fall of Charleston — to charter the establishment of Transylvania Seminary, which would serve as a spearhead of learning in the wilderness [1]. Transylvania thereby became the 16th college in the United States and the first on the other side of the Allegheny Mountains.
[Show full text]
Reflux Condenser Buyer's Guide
Premium Laboratory Equipment Reflux Condenser Buyer’s Guide Understanding the ① Why refluxing? Air cooled: Reflux condensers with air co- ④ Water consumption and co- oling are available in different versions. In oling costs. Refluxing is one of the most common wor- low-priced systems, heat exchange with air cooled reflux system king methods for organic synthesis. Many the ambient air takes place only on the Extrapolated, an average of 150 liters of chemical reactions only take place under outer surfaces of the glass column. Thus, water flow through a water cooled reflux heat or are accelerated by an increased re- the column must be accordingly high to condenser per hour (Fig. 2 Diagram Water action temperature. Reflux condensers are be able to dissipate heat to the environ- consumption in comparison). Fortunately, used to prevent the solvent of a reaction ment. The much more elaborately desig- many laboratories have installed recircula- Increased requirements on safety and sustainability in the mixture from evaporating even when it is ned reflux condenser system Findenser™ ting chillers or central water recirculating chemical laboratory have been the trigger for the heated for extended periods of time. is equipped with a finned aluminum jacket, systems to reduce the enormous water consumption during refluxing. However, development of new reflux condensers without water which multiplies the heat exchanger surfa- ② Air cooled or water cooled. ce in a compact way. even cooling the coolant has a negative cooling. With the Findenser™, Heidolph offers an What is the difference? impact on the energy balance. efficient, air cooled reflux system, too. The refluxing principle is as simple as it is What are the advantages and disadvantages of reflux ingenious: The boiling vapor from the so- ③ Safety in the laboratory has lution in the flask rises vertically upwards condensers? What are the general aspects to consider many facets.
[Show full text]
50 ML Oil and Water Retort Instruction Manual
50 ML Oil and Water Retort Instruction Manual Part No. 210466 Rev. E Copyright 2009 Fann Instrument Company Houston, Texas USA All rights reserved. No part of this work covered by the copyright hereon may be reproduced or copied in any form or by any means -- graphic, electronic or mechanical without first receiving the written permission of Fann Instrument Company, Houston, Texas USA Printed in USA NOTE: Fann reserves the right to make improvements in design, construction and appearance of our products without prior notice. ®FANN is a registered trademark of Fann Instrument Company. Fann Instrument Company PO Box 4350 Houston, Texas USA 77210 Telephone: 281- 871-4482 Toll Free: 800-347-0450 Fax: 281- 871-4358 TABLE OF CONTENTS SECTION PAGE 1 Description ................................................................................................1 2 Safety Considerations ..............................................................................2 3 Operating Procedure ................................................................................3 4 Care of Equipment....................................................................................5 5 Calculations...............................................................................................6 6 Specifications............................................................................................8 7 Retort Repair.............................................................................................9 8 Parts List .................................................................................................15
[Show full text]