CHARGING YOUR HEADSET Manually pairing your Bluetooth device A tone sounds (every 60 seconds) and the LED 1 Press and hold (call) to enter pairing mode. The flashes red when your headset battery is low. LED blinks red and blue. • Set power switch to OFF before charging. 2 Make sure that your Bluetooth device is within QUICK SETUP GUIDE • Connect the USB charging cable from your 33 ft. (10 m) of your headset. headset’s charging port to a USB port. 3 Turn on your Bluetooth device, turn on Bluetooth, then set your device to pairing mode. For more Bluetooth Headset information, see the documentation that came with your Bluetooth device. NS-CAHBTEB01 / NSCAHBTEB01-B / NSCAHBTEB01-C / NS-CAHBTEB01-B-C 4 On your Bluetooth device, select NS-CAHBTEB01. The LED lights blue and a tone sounds when your headset pairs to your PACKAGE CONTENTS FEATURES Bluetooth device.
• Bluetooth Headset • High-quality stereo sound from Bluetooth 4.0 enabled Pairing two devices
N O F/ F • USB charging cable devices O 1 Pair your headset to your secondary Bluetooth • Battery lasts 12 hours (talk), 10 hours (music) device first. See “Pairing your first Bluetooth • Earbuds (small and large) • Inline controls easily adjust audio PAIRING YOUR HEADSET device” for instructions. • Quick Setup Guide • Curved design fits comfortably around the neck Pairing your first Bluetooth device 2 Press and hold (call) on your Bluetooth headset 1 Slide the power switch to ON. The LED blinks red to enter pairing mode. Rewind/Skip back and blue and the headset enters pairing mode. 3 Connect your primary Bluetooth device to your Bluetooth headset. See “Manually pairing your Fast forward/Skip forward Bluetooth device” for instructions. 4 Re-pair your secondary Bluetooth device to your OFF/ON Bluetooth headset. See “Manually pairing your Bluetooth device” for instructions. Play/Pause Note: When connected to two phones, the headset calling functions will work with the primary phone. Charging port 2 Make sure that your Bluetooth device is within Disconnecting and reconnecting your paired 33 ft. (10 m) of your headset. device 3 Turn on your Bluetooth device, turn on Bluetooth, Your headset remembers up to six Bluetooth devices Neck strap then set your device to pairing mode. For more and will turn off after three minutes if it is not paired information, see the documentation that came to a Bluetooth device. Earbud (R) with your Bluetooth device. TO DISCONNECT... TO RECONNECT... Power switch 4 On your Bluetooth device, select NS-CAHBTEB01. The LED lights blue and a tone Turn off your headset Turn on your headset. Your headset sounds when your headset pairs to your searches for the last connected
F/ON Bluetooth device and reconnects. F
O Bluetooth device. Earbud (L) Call button/LED indicator Volume down Volume up
Before using your new product, please read these instructions to prevent any damage. TO DISCONNECT… TO RECONNECT… • To switch audio between your headset and phone, TROUBLESHOOTING use your phone’s controls. Move the Bluetooth Make sure your Bluetooth device is • To reject an incoming call, press and hold (call) for PROBLEM SOLUTION device out of range within 33 feet of your headset. two seconds. No sound or low volume • Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and • To end a call, press (call) one time. “NS-CAHBTEB01” is selected. Turn off your Bluetooth Turn on your Bluetooth device, then • Turn up the volume on your headset and Bluetooth device. device make sure Bluetooth is on. Call waiting • Make sure that your Bluetooth device is not muted. • To switch to an incoming call, press (call) twice • Make sure that your headset and Bluetooth device are not paired to other devices. Turn off Bluetooth on Turn on Bluetooth on your Bluetooth while speaking on an active call. your Bluetooth device device. • To switch between two active calls, press (call) twice. Cannot connect with Bluetooth • Shorten the distance between your headset and Bluetooth device. • To end both calls, press (call). • Turn your devices off, then on. Re-pair your headset and Bluetooth device. Connect your Bluetooth Disconnect your Bluetooth device from • Make sure that your headset and Bluetooth device are not paired to other devices. device to another the other Bluetooth device, then set your Begin playback on your Bluetooth device. • Make sure that your Bluetooth device supports the HSP, SFP, A2DP, or AVRCP Bluetooth Bluetooth device device to pairing mode. Select • To play audio, press . protocol. “NS-CAHBTEB01” on your Bluetooth • To skip to the next track, press . • Make sure that you have selected “NS-CAHBTEB01” on your Bluetooth device. device. • To skip to the previous track, press . • To fast forward, press and hold . Note: If a device does not automatically reconnect, you Bluetooth device keeps unpairing • Shorten the distance between your headset and your Bluetooth device. • To rewind, press and hold . may need to reselect “NS-CAHBTEB01” on your Bluetooth • Recharge your headset and Bluetooth device's batteries. device. SPECIFICATIONS “NS-CAHBTEB01” does not appear on my • Shorten the distance between your headset and Bluetooth device. WEARING YOUR HEADSET • Average charging time: 1.5 - 2 hours Bluetooth device • Put your headset into pairing mode, then refresh your list of Bluetooth devices. For • Operating time: Talk - 12 hours / Music - 10 hours more information, see the documentation that came with your Bluetooth device. • Working distance: Up to 33 ft. (10 m) • Battery: Lithium 200mAh/3.7V No Power • Make sure your Bluetooth headset is charged. • Make sure your Bluetooth headset is turned ON. SAFETY INFORMATION/CAUTION FCC Statement • Reorient or relocate the receiving antenna. RSS-102 Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the • Increase the separation between the equipment and receiver. This equipment complies with Industry Canada radiaĕon exposure limits set following two conditions: (1) this device may not cause harmful interference, • Connect the equipment into an outlet on a circuit different form that to forth for an uncontrolled environment. and (2) this device must accept any interference received, including interference which the receiver is connected. Cet équipement est conforme à l'exposiĕon aux rayonnements Industry that may cause undesired operation. • Consul the dealer or an experienced radio/TV technician for help. Canada limites établies pour un environnement non contrôlé. USING YOUR HEADSET FCC Caution Industry Canada Compliance Making phone calls Changes or modifications not expressly approved by the party responsible for IC Statement ONEYEAR LIMITED WARRANTY Note: When your headset is connected to two Bluetooth compliance could void the user’s authority to operate this equipment. This device complies with Industry Canada’s licence exempt RSSs. Operation is Visit www.insigniaproducts.com for details. devices, calling functions work with the primary Bluetooth Note: This equipment has been tested and found to comply with the limits for subject to the following two conditions: a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are device (the one that is connected second or made the last (1) This device may not cause interference; and CONTACT INSIGNIA: outgoing call). designed to provide reasonable protection against harmful interference in a (2) This device must accept any interference, including interference that may residential installation. This equipment generates, uses and can radiate radio 1-877-467-4289 (U.S. and Canada) • To make a call, use your phone’s controls, then cause undesired operation of the device. select the headset as the audio source. frequency energy and, if not installed and used in accordance with the 01-800-926-3000 (Mexico) instructions, maybe cause harmful interference to radio communications. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux www.insigniaproducts.com • To redial the last number on your primary phone, appareils radio exempts de licence. L'exploitaĕon est autorisée aux deux press (call) twice. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or condiĕons suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy • To answer an incoming call, press (call). l'uĕlisateur de l'appareil doit accepter tout brouillage radioélectrique subi, Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A. Note: Your headset vibrates when there is an incoming television reception, which can be determined by turning the equipment off ©2016 Best Buy. All rights reserved. Made in China même si le brouillage est suscepĕble d'en compromeĥre le foncĕonnement. call. and on, the user is encouraged to try to correct the interference by one or more of the following measures: V6 ENGLISH 16-0564