2016 CATALOG | ENGLISH Telephone Audio Interface Products

NEW CellTap 4C™ RemoteMix X4™ JK Audio pg. 7 pg. 28 What’s new at JK Audio? Our 2016 catalog On The Web introduces one re-engineered product and one Be sure to check out our web site. new product. Our original CellTap has been We keep it up to date with: reintroduced as CellTap 4C, the 4C stands for 4-conductor, or TRRS, the headset connector found • New product information on most smartphones. This new version offers • FAQ (Frequently the ability to record your cell phone conversation, Asked Questions) with your voice and the caller’s voice going out to • Products categorized separate channels of your favorite audio recorder. by application RemoteMix x4 is a field mixer like no other. RMx4 offers a monitoring system that parallels the • Product Selection features of its mixer section. Designed for live Assistant applications that require communications between • Article reprints talent in high noise environments. • Trade show information Be sure to check out our new web site, and add your name to our mailing list. We’ll keep you up to date with JK Audio news and product updates. Wireless Phone Compatibility Many JK Audio products provide a connection to a wireless (cell) phone. While our interface cables plug directly into the headset/earpiece jack on many phone models, there are some phones that are designed to Joe Klinger prevent operation with third party accessories. In most President cases, if you can use a generic, third party headset [email protected] with your cell phone, you can use your JK Audio product as well. Also, while some wireless phones have an acceptable 2.5 mm or 3.5 mm jacks, others require a headset adapter to convert their proprietary connector to an acceptable jack. JK Audio does not Warranty offer these adapters. JK Audio products are covered by a Two Year Warranty to be free from defective workmanship and Connect to Smart Phones materials. In the event that your JK Audio product The CN113 adapter cable is now shipping with needs repair, you must call us to get an authorization, select JK Audio products. This four conductor 3.5 and then carefully pack and ship it to us or the nearest mm headset adapter cable is compatible with most authorized repair center. You will pay for shipping iPhones, Android phones, and notebook computers. to us and we will pay for return back to you. No free repairs will be made if the defect was caused by The CN113 adapter cable allows audio to be sent misuse, weather conditions, or other causes, except through the headset jack of these new phones and for defective workmanship or materials. There are notebooks, allowing send and receive of voice band no expressed or implied warranties which extend audio during regular calls, or full bandwidth audio beyond the warranty here made. Prices, features, and using third party codec applications. specifications subject to change without notice. This cable ships with Daptor Two, ComPack, RemoteMix One, RemoteMix 2, RemoteMix 3.5, JK Audio. Inc. RemoteMix 4 and Interchange. 1311 E 6th Street Sandwich, IL 60548 USA tel: 800.552.8346 +1.815.786.2929 fax: 815-786-8502 jkaudio.com

HOURS OF OPERATION: Monday Thru Friday: 8:30-5:00 pm CDT

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. JK Audio products are built with pride right here in and any use of such marks by JK Audio, Inc. is under license. Sandwich, Illinois USA.

2 JK Audio Contents

Handset Interfaces Listen-Only IFB QuickTap™ 6 RemoteAmp™ 30 THAT-2™ 6 RemoteAmp Two™ 30

Wireless Audio Interfaces Intercom Interfaces CellTap 4C™ 7 Interchange™ 32 Daptor Two™ 7 BlueSet™ 33 Daptor Three™ 8 Interloop™ 34 BlueDriver-F3™ 9 Outerloop™ 35 BlueDriver-M3™ 9

Desktop Digital Hybrids Broadcast Host™ 11 BlueKeeper™ 11 innkeeper PBX™ 12 New for 2016 Universal Host™ 13

Auto-Answer Hybrids AutoHybrid™ 14 AutoHybrid IP2™ 15 innkeeper LTD™ 17 VoIP Digital Hybrids CellTap 4C™ AutoHybrid IP2™ 15 Wireless Phone Audio Tap page 7 Remote Control Interfaces Guest Module 1™ 16 RIU-IP™ 16

POTS Digital Hybrids innkeeper LTD™ 17 innkeeper 1rx™ 18 innkeeper 2 & 4™ 19 RemoteMix x4™ POTS Talk Show System 4 Channel Field Mixer page 28 Guest Module™ 20 Concierge 2x6™ 21

Remote Broadcasting RemoteMix One™ 22 BluePack™ 23 ComPack™ 24 RemoteMix 2™ 25 RemoteMix 3.5™ 26 RemoteMix 4™ 27 RemoteMix x4™ 28

Don't know where to start? | Next: Product Selection Assistant >> 3 Product Selection ASSISTANT What do you need to do?

Record an Interview: Play Live Recorded Audio Broadcast Live Audio into the Phone: from the Field:

Mobile Cell Phone Mobile Cell Phone Mobile Cell Phone BlueDriver-M3 9 BlueDriver-F3 9 BlueDriver-F3 9 BlueKeeper 11 BlueKeeper 11 BlueDriver-M3 9 BluePack 23 BluePack 23 BluePack 23 CellTap 4C 7 Daptor Two 7 ComPack 24 RemoteMix One 22 Daptor Three 8 Daptor Two 7 RemoteMix One 22 Daptor Three 8 Single Line Phone RemoteMix One 22 Broadcast Host 11 Single Line Phone RemoteMix 2 25 innkeeper 1rx 18 AutoHybrid 14 RemoteMix 3.5 26 innkeeper LTD 17 Broadcast Host 11 RemoteMix 4 27 QuickTap 6 innkeeper 1rx 18 RemoteMix x4 28 THAT-2 6 innkeeper LTD 17 THAT-2 6 Single Line Phone Multi-Line Business Phone ComPack 24 AutoHybrid IP2 15 Multi-Line Business Phone RemoteMix 2 25 innkeeper PBX 12 AutoHybrid IP2 15 RemoteMix 3.5 26 QuickTap 6 innkeeper PBX 12 RemoteMix 4 27 THAT-2 6 THAT-2 6 Universal Host 13 Universal Host 13 Multi-Line Business Phone ComPack 24 RemoteMix 3.5 26 RemoteMix 4 27

4 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 Talk Show Systems: Connect a PA System to a Monitor IFB Program Audio: Phone Line:

Multi-Line Business Phone Transmit Only Mobile Cell Phone AutoHybrid IP2 15 AutoHybrid 14 BlueDriver-M3 9 innkeeper PBX 12 AutoHybrid IP2 15 BluePack 23 Universal Host 13 BlueDriver-F3 9 ComPack 24 Daptor Two 7 Daptor Two 7 Analog Phone Lines Daptor Three 8 Daptor Three 8 Concierge 2x6 21 THAT-2 6 Guest Module 2x6 20 Single Line or Listen-Only Business Phone System AutoHybrid 14 ComPack 24 AutoHybrid IP2 15 THAT-2 6 BlueDriver-M3 9 Daptor Two 7 Multiple Analog Phone Lines Daptor Three 8 innkeeper 2 19 QuickTap 6 innkeeper 4 19 THAT-2 6 Balanced Program Line Full-Duplex, Talk and Listen RemoteAmp 30 AutoHybrid IP2 15 RemoteAmp Two 30 Broadcast Host 11 Daptor Two 7 Wet Party-Line Intercom Daptor Three 8 BlueSet 33 innkeeper 1rx 18 ComPack 24 innkeeper 2 19 Interchange 32 innkeeper 4 19 Interloop 34 innkeeper LTD 17 Outerloop 35 innkeeper PBX 12 RemoteAmp Two 30 Universal Host 13

Let's Start Recording | Next: Handset Interfaces >> 5 1 2 3

4 5 6

7 8 9

0* #

MIC 00:00:00 L R

PLAY/REC

MENU 1 2 3 OR 4 5 6 7 8 9 XLR OR RCA 0* #

QuickTap™ THAT-2™ Telephone Handset Tap Telephone Handset Audio Tap HANDSET INTERFACES

Quick and Simple. QuickTap gives you an easy Handset Tap + Send Input. Connect the THAT-2 way to record telephone interviews to your portable between your telephone and handset for quick access recorder or even directly to your computer sound to audio in and out of the telephone. The THAT-2 is card to be uploaded to your podcast. For group listen used by radio stations to record and play sound bites, applications, the Output jack can be connected to a and by TV and film sound crews to get IFB and dialog powered speaker or PA system. This jack contains a over phone lines. nice mix of both sides of the conversation. Plus More Control. A push-button selects whether the handset audio or line input will be sent into the telephone. The output jacks contain a mix of audio FEATURES QT T2 from both sides of the conversation. The THAT-2 will emulate the type of microphone that is in the handset »» Works with analog, digital, PBX, • • and allow you to send audio into many different types and VoIP telephones of analog and digital PBX sets, as well as ISDN or VoIP telephones. »» 3.5mm Mono Audio Out •

»» XLR Input & Output •

»» RCA Input & Output • SPECIFICATIONS

»» Input & Output Level Control • QT Output 1/8" (3.5mm) Mono: 600 ohms / 100 mV RMS; -18 dBu nom. »» Switch selects between carbon, • dynamic or electret handset types Size: 2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm) Weight: 3.4 oz. (100 g) »» Passive Design • • No Battery or AC Required T2 Input 600-900 ohms / : QuickTap, : THAT-2 Female XLR / RCA: QT T2 250 mV RMS; -10 dBu nom.; +12 dBm max Output Male XLR / RCA: 0-2500 ohms / 100 mV RMS; -18 dBu nom.

Size: 4.5” x 3.2” x 1.3” Weight: 9 oz. (250 g)

6 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 The localaudioisafullbandwidthconnection. on theleftchannelandcallerrightchannel. transformer coupledstereooutputprovidesthelocalmic to amiclevelinputonyourrecorderormixer. The headset andphone,thenconnectthestereooutput jack. ConnectCellTap 4Cbetweentheexistingear-bud notebooks thatusethe4-conductor3.5mmTRRSheadset compatible withmostsmartphones,tablets,and CellTap 4Cisaninterviewrecordingadapterthat’s C Phone AudioTapWireless CellTap 4C™ FEATURES apture BothSidesoftheConversation. » » » » » » » » » » » » » » » » » » No Battery orACNo Battery Required Passive Design 3.5 mmTRRSHeadset Jack 1/4" Input&Output XLR Input&Output Screwdriver Caller Level adjustment TRRS Configurations Switch SelectsBetween Popular 3.5mm Stereo Audio Output Headset Interface 4-conductor 3.5mm (Wide-band Speech) HD Voice Compatible

* Q A A

8 X

C 3

9 R CellTap,

( G

: ) B H

, N J

; _ U

K M ’

- I

” O + $

D @ P

00:00:00 R L PLAY/REC MENU MIC D 2 : CT • • • • • • • Daptor Two

D2 • • • • • XLR ORTRS D2 CT phone? Remote Broadcasts orIFBfeeds over acell Wireless Phone Audio Interface Daptor Two™ internal micandspeaker. Daptor Two asaheadsetwhichwilldisablethe or 1/4"input,notboth.Your devicewillrecognize codec applications.You mayuseeitherthe XLRinput regular calls,orfullbandwidthaudiousingthirdparty and receivevoicebandaudiofromyourmixerduring that acceptsathirdpartyheadsetorearpiece.Send jack ofanywirelessphoneornotebookcomputer SPECIFICATIONS Output Input Output Unbalanced 1/4" Mono: Unbalanced 1/4" Mono: Balanced Female XLR: 1/8" (3.5mm)Mono: Balanced MaleXLR: Simply plugDaptorTwo intotheheadset Weight: Weight: Size: Size:

9 oz.(250g) 4.5” x3.2”1.3” Mic Level 600 ohms/45mVRMS;-25dBunom. -10 dBunom.;0max 250 mVRMS; 600 ohms/ 3.5 oz.(100g) 2” x1.3”(5.15.13.3cm) 600 ohms/100mVRMS;-18dBunom

| More: Wireless Audio Interfaces >>

* Q A A

8 X

C 3

9 R

( G

: ) B H

, N J

; _ U

K M ’

- I

” O + $

D @ P

OR CODEC

7 WIRELESS AUDIO INTERFACES SIDE VIEW

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M

Daptor Three™ FEATURES D3 F3 M3 Wireless Audio Interface »» HD Voice (Wide-Band Speech) • •

XLR Connectivity for your Bluetooth Device. »» 3-pin Female XLR Input • • WIRELESS AUDIO INTERFACES Daptor Three is a simple, professional audio interface using Bluetooth Wireless Technology. Daptor Three »» 3-pin Male XLR Output • • connects to your cell phone like any other Bluetooth enabled headset. It will also connect to any other »» 3.5 mm Input • • product, such as a laptop, that allows a wireless »» 3.5 mm Output • • headset connection. Transmit, Receive or 2-way Handsfree. »» Trim Pot Adjusts Mic Level • Daptor Three functions as either a Master or Headset »» Headset/Phone Switch • • device. In Master mode, Daptor Three connects to headsets or headset type devices, transmitting A2DP »» Mini USB Power Jack • • audio, or initiating a 2-way voice band connection » > 18 Hours on one to a headset. In Headset mode, Daptor Three » • connects to wireless phones, computers, or Bluetooth 9-volt Alkaline Battery dongles, receiving A2DP audio or a 2-way Hands Free » >10 hours on Internal Li-Ion connection. » • • Battery

D3: Daptor Three, F3: BlueDriver-F3, M3: BlueDriver-M3 SPECIFICATIONS F3 Input D3 Input 3-pin Female XLR: 1k ohms / -34 dBu nom. Balanced Female XLR: 20k ohms / -4 dBu nom. Output 1/8" (3.5mm) Stereo: 20k ohms / -10 dBu nom. 1/8" (3.5mm) Stereo: 1.1k ohms / -34 dBu nom.

HF = 300Hz - 3.4kHz Input Frequency Response: M3 A2DP = 30Hz - 17kHz 1/8" (3.5mm) Stereo: 20k ohms / -10 dBu nom. Output Output Balanced Male XLR: 200 ohms / 0 dBu max 3-pin Male XLR: 1.1k ohms / -34 dBu nom. 1/8" (3.5mm) Stereo: 200 ohms / -6 dBu max Bluetooth Wireless Technology HF = 300Hz - 3.4kHz Frequency Response: Standard: 3.0 A2DP = 30Hz - 17kHz HF = full duplex voice, 300Hz – 3.4kHz Power: One 9-volt Battery Bluetooth Profiles: HF (HD) = full duplex HD voice, 50Hz – 7kHz Size: 4.5” x 3.2” x 1.3” (11.2 x 6.9 x 3.5 cm) A2DP = 30Hz – 17kHz, master to slave Weight: 9 oz. (250 g) Range: 50 ft (15 m) Battery: Internal Lithium-Ion Polymer Rechargeable F3 + M3 Power: 120-240 VAC power supply (included) Size: 1.1” x 4.4” (2.8 cm x 11.2 cm) Weight: 2.1 oz. (60 g) 8 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 Power Rec Power Send

BlueDriver-F3™ BlueDriver-M3™ Wireless Audio Interface Wireless Audio Interface

Mic/Mixer Output to your Bluetooth Device. Bluetooth Device to Mic Input. Pair to your Pair to your Bluetooth enabled cell phone or headset Bluetooth equipped cell phone or headset to get to send audio to your Bluetooth device. The 3.5 mm audio straight from your Bluetooth device into stereo jack contains a mic level output suitable for your Mic input. The 3.5 mm send jack will accept a recording, with the clean mic signal on the left signal from the headphone output of the mixer for channel and the Bluetooth return on the right. transmission back to the cell phone or headset.

BlueDriver-F3 Applications BlueDriver-M3 Applications

M3-A # @ # 1 2 _ - + 1 _ + @ Q 3 ( ) P Q 2 3 ( ) - W E U I O W I O P R T Y E R T Y U * 4 ” DEL * DEL 5 6 / : ; ’ 4 ’ ” F3-A A L 5 6 / : ; S D J K A S L F G H D F G H J K * 7 , . * ALT 8 ! 7 , . 9 ? ALT 8 9 ? ! Z M $ $ X C V B N Z X C V B N M WIRELESS AUDIO INTERFACES WIRELESS AUDIO

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L Headset * 7 , . ALT 8 9 ? ! $ Z X C V B N M Connect ™ ™ BlueDriver-M3 Headset JK Audio™ BlueDriver-F3™ Phone JK Audio ConnectPhone

MIC 00:00:00 L R PLAY/REC M3-B F3-B MENU

Headset Mode vs. Phone Mode A switch on either unit selects between connection to a 3rd party Bluetooth headset, or a cell phone.

Headset Connect: Pair BlueDriver™ to your 3rd party Bluetooth headset. Some Bluetooth headsets allow you to switch between your audio device and a cell phone.

Phone Connect: Pair BlueDriver™ to your cell phone to call into the station or bring in caller audio. JK Audio 39 A HYBRID FOR EVERY DESKTOP. Analog & Wireless/Cellular

Turn your desktop into a professional broadcast center. Each Hybrid includes everything you need to get talk show quality phone recordings into your mixer or sound card with excellent caller separation.

Broadcasting Made Easy. FEATURES BH BK Connect a mic and headphones for a simple broadcast DESKTOP DIGITAL HYBRIDS »» Excellent Separation of Caller and back to the station. Already at the station? Use a • JK Audio Digital Hybrid in your newsroom to record Talent Voice high quality interviews. Or, you can upload your »» 16 bit DSP Technology • recorded interview to your podcast. JK Audio Digital Hybrids allows you to send mic and line level signals, »» Bluetooth Wireless Technology • at a higher quality than the phone's mic and speaker, into the phone line while maintaining excellent »» Auto-Answer (Switchable On/Off) • separation between your voice and the caller. »» Proprietary Auto Null Algorithm • (50 dB null) Interviews: Connect a professional dynamic mic and headphones to a JK Audio digital hybrid to capture »» Send XLR Line Input • • your voice in full audio bandwidth, while maintaining excellent separation between your voice and the caller »» Mic/Line Switch • •

Conference Room: Easily connect your PA system »» 3.5mm Mono Line Input • • to the telephone system. The echo canceller algorithm »» 3.5mm Stereo Line Input • prevents feedback and allow full duplex conversations. »» Caller XLR Line Output • • Why a Digital Hybrid? The main function of any hybrid is to bring in the »» 3.5mm Stereo Line Output • • caller’s voice from the phone line, as clear and clean as »» 3.5mm Mono Mic Level Output • possible. In the real world, when you send your voice down the telephone line it has a tendency to bleed »» 3.5 mm Stereo Headphone Jack • • over into the caller’s audio. The hybrid must adapt to the phone line in order to properly separate transmit »» Send and Caller Signal Level LEDs • • and receive audio. We use a 16-bit DSP to monitor the phone line and audio signals continuously in order to »» Send and Caller Volume Controls • • deliver excellent separation. Our dual-convergence »» Guest Module Remote Jack • echo canceller algorithm can achieve excellent transhybrid loss, typically exceeding 50 dB, without BH: Broadcast Host, BK: BlueKeeper any setup and without sending a burst of noise into the phone line. Professional Digital Hybrids pg. 18 innkeeper 1rx, innkeeper 2 and innkeeper 4 can be found on pg 18. Although a mixer is not required for the Desktop Digital Hybrids, it is required for the Professional innkeeper™ series and rackmount digital hybrids.

10 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 Analog & Wireless/Cellular

MIC MIC 00:00:00 L 00:00:00 R L OR OR R PLAY/REC

PLAY/REC MENU OR MENU

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M GUEST MODULE 1

Broadcast Host™ BlueKeeper™ Analog Desktop Digital Hybrid Wireless Audio Gateway Our Most Popular Digital Hybrid. No Phone Line? Not a Problem. Broadcast Host provides connections for a It's the 21st century, if you replaced your home phone microphone, headphones, mixer, sound card, or you're always on the move, you can still get mic telephone and your analog telephone line. An and line level audio in and out of your wireless auxiliary telephone is only required to place outgoing phone. BlueKeeper pairs to your cell phone like a calls. Broadcast Host features Auto-Answer/Auto Bluetooth wireless headset. Simply connect your Disconnect for use in IFB and monitoring applications. favorite microphone and headphones and enjoy an immediate improvement at both ends of the call. Remote Control. Control Broadcast Host with the The professional microphone preamplifier provides a Guest Module 1. See pg 16. dramatic improvement in sound quality to the caller

or back to the station if you are away from the studio. HYBRIDS DIGITAL DESKTOP

SPECIFICATIONS BH Input BK Input 1k ohms / 15 mV RMS; -34 dBu nom.; 1k ohms / 15 mV RMS; -34 dBu nom.; Balanced Female XLR: Balanced Female XLR: Mic/Line Pad Switch = +6 dBu max Mic/Line Pad Switch = +6 dBu max 20k ohms / 1/8" (3.5mm) Mono: 20k ohms / 250 mV RMS; -10 dBu nom. 1/8" (3.5mm) Stereo: 250 mV RMS; -10 dBu nom.; +6 dBu max Output Output 200 ohms / 500 mV RMS; -4 dBu nom.; Balanced Male XLR: 200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only Balanced Male XLR: +14 dBu max; Caller Only 50 ohms / 250 mV RMS; +6 dBu max 1/8" (3.5mm) Stereo: 50 ohms / 15 mV RMS; -34 dBu nom. Left = Send; Right = Caller 1/8" (3.5mm) Mono: Mixed Send and Caller 8 ohms / 250 mW Headphone 1/8" (3.5mm): 50 ohms / Mixed Send and Caller 1/8" (3.5mm) Stereo: 250 mV RMS; -10 dBu nom.; +6 dBu max Left = Send; Right = Caller Phone Line: RJ11C Headphone 1/8" 8 ohms / ½ watt per channel Aux Phone: RJ11C (3.5mm): Mixed Send and Caller Ringer: 0.8B REN Bluetooth Frequency Response: Telephone Side 200 Hz-3600 Hz Standard: 2.0 Distance: 33 ft (10 m) Isolation: 1500 VAC HF = 300Hz - 3.4kHz Frequency Response: Power: 120-240 VAC Power Supply A2DP = 30Hz - 17kHz Size: 7" x 6" x 1.6" (18 x 15 x 4.2 cm) BH: Broadcast Host, BK: BlueKeeper BH + BK Weight: 2.2 lbs. (1kg)

Do you have an VoIP/PBX Line? | Next: VoIP/PBX Desktop Digital Hybrids >> 11 A HYBRID FOR EVERY DESKTOP.

VoIP/PBX/USB CODEC 1 2 3 4 5 6

7 8 9

0* #

MIC 00:00:00 L R

PLAY/REC OR MENU

FEATURES PBX UH innkeeper PBX™ DESKTOP DIGITAL HYBRIDS »» Excellent Separation of Caller and VoIP/PBX Desktop Digital Hybrid • • Talent Voice The Broadcast Host for PBX Phone Lines. » 16 bit DSP Technology » • • Innkeeper PBX easily converts your multi-line PBX type »» 16 bit USB Audio CODEC • telephone system into a professional, affordable talk show console. Simply connect between your telephone »» Proprietary Auto Null Algorithm handset and the phone base. So simple, anyone can • • (50 dB null) do it.

»» Send XLR Line Input • • innkeeper PBX provides connections for a microphone, »» Mic/Line Switch • • headphones, mixer, sound card, and telephone handset. The stereo output jack on the back of the »» 3.5mm Mono Line Input • • unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced »» Caller XLR Line Output • • XLR output jack contains only the caller’s voice. The Handset and Broadcast buttons select between talking »» 3.5mm Stereo Line Output • • on the handset, or sending and receiving through the »» 3.5 mm Stereo Headphone Jack • • audio connections. »» Send and Caller Signal Level LEDs • • »» Send and Caller Volume Controls • • »» Handset Selector Switch • • (Electret, Carbon, Dynamic)

PBX: innkeeper PBX, UH: Universal Host

Talk Shows: Connect between your console and your existing multi-line telephone. Screen callers from another phone while you take callers on the air by simply selecting available lines on your phone.

12 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 OR

1 2 3

4 5 6

7 8 9

0* #

MIC 00:00:00 L R

PLAY/REC OR MENU

Universal Host™ SPECIFICATIONS Input VoIP/PBX Desktop Digital Hybrid 1k ohms / 15 mV RMS; -34 dBu nom.; Balanced Female XLR: Mic/Line Pad Switch = +6 dBu max The Top-Notch Desktop Digital Hybrid 1/8" (3.5mm) Mono: 20k ohms / 250 mV RMS; -10 dBu nom. Universal Host provides connections for a microphone, Output headphones, mixer, sound card, and telephone 200 ohms / 500 mV RMS; -4 dBu nom.; Balanced Male XLR: handset. The stereo output jack on the back of the +14 dBu max; Caller Only 50 ohms / unit provides your voice on one channel and only 1/8" (3.5mm) Stereo: 250 mV RMS; -10 dBu nom.; +6 dBu max the caller’s voice on the other channel. The balanced Left = Send; Right = Caller 8 ohms / 250 mW XLR output jack contains only the caller’s voice. The Headphone 1/8" (3.5mm): Handset and Online buttons select between talking Mixed Send and Caller on the handset, or sending and receiving through the Phone Base: RJ22 audio connections. A second switch selects between Handset: RJ22 monitoring the caller or listening to the USB codec HYBRIDS DIGITAL DESKTOP over the headphones. Isolation: 1500 VAC Frequency Response: Telephone Side 200Hz-3.6kHz USB CODEC for Full Bandwidth Streaming Power: 120-240 VAC Power Supply The 16 bit USB audio CODEC allows stereo recording Size: 7" x 6" x 1.6" (18 x 15 x 4.2 cm) at up to 48 kHz sampling rate, with the talent voice on Weight: 2.2 lbs. (1kg) the left channel in full bandwidth, and the caller on the right. Play recordings from your computer directly USB *Universal Host Only into the phone system. Connector: Mini Type B Female Standard: v2.0 Sampling Rate: 32kHz, 44.1kHz, 48kHz

Next: Auto-Answer Hybrids >> 13 AutoHybrid™ FEATURES Full Duplex Auto-Answer Hybrid »» Enable/Disable Auto-Answer Not just another half duplex auto-coupler. »» Hybrid Null Adjust This simple, passive, auto-answer/disconnect telephone (Up to 20 dB Separation) line hybrid allows simultaneous send and receive audio through analog telephone lines. Suitable for »» Front Panel Off-Hook LED monitoring remote locations, IFB feeds, and many »» Send XLR Line Input

AUTO-ANSWER HYBRIDS simple studio, conferencing, and PA telephone interface applications. »» Caller XLR Line Output »» Remote Control Terminals Full Duplex. Yes, you can send and receive audio at the same time. The dual transformer hybrid is »» Rack Mountable capable of 20 dB nominal trans-hybrid loss. In other words, your transmit signal will appear mixed with the »» Passive Design receive signal, but at a level 20 dB lower than it was (No Battery or AC Required) sent into the phone line.

Auto-Answer. The "Auto" feature is very simple. When the "Auto" switch is selected, AutoHybrid will SPECIFICATIONS answer on the first ring. The phone line will remain Input off-hook, until either the Drop button is depressed, or 1k ohms / Female XLR: until the phone company releases the line. 500 mV RMS; -4 dBu nom.; +6 dBm max Insertion Loss: 11dB Send XLR to Phone Line Output Male XLR: 600 ohms / 200 mV RMS; -12 dBu nom.

Off-hook control (+5VDC Momentary) Screw Terminals: Release Control (+5VDC Momentary) OH LED Signal (pulled to ground on OH) Phone Line: RJ11C Aux Phone: RJ11C Ringer: 0.8B REN Isolation: 1500 VAC Frequency Response: Telephone Side 200 Hz-3600 Hz ACCESSORIES Size: 4” x 5” x 1.5” (10.5 x 13 x 4 cm) RA4™ Rack Mount Panel Weight: 12 oz. The RA4 holds four AutoHybrids in a 1U rack space.

14 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 AutoHybrid IP2™ FEATURES VoIP/AoIP Codec »» Simple 2-Line VoIP Call Control, Auto-Answer, and Conference A Smooth Transition from POTS to IP. This simple product plays a critical role in studio »» G.711, G.722 (HD Voice) VoIP Hybrid interview, monitoring, and IFB applications. »» 24-bit AoIP Wide Band Stereo Codec As the name implies, AutoHybrid IP2™ functions »» Female XLR Line Input (2) as a two-line VoIP hybrid. The desktop/half-rack design provides one button access to the common »» Male XLR Line Output (2) features of a phone line hybrid including: call control, auto-answer, and conference. Advanced call control »» Send and Receive LED Metering features and VoIP line setup are provided through the internal web server. In VoIP mode, Line-level XLR jacks »» LAN, USB, Remote Control Connections provide mono send and receive audio for Line 1 and »» Rear Panel Recessed Level Controls Line 2. »» Remote Control I/O Terminal Block AutoHybrid IP2™ also functions as an Audio over IP (AoIP) Codec, streaming wide-band stereo audio. In »» PoE or AC Mains Powered

AoIP mode, the XLR jacks provide stereo send and HYBRIDS DIGITAL VOIP »» Optional RA2 Rack Mount Adapter receive audio. The AutoHybrid IP2™ Remote jack allows easy SPECIFICATIONS connection to the JK Audio Interchange™ Intercom Input Phone Bridge, offering an auto-answer VoIP 20k ohms / Female XLR: connection into your party-line intercom. 500 mV RMS (-4 dBu nom) +12 dBu max

Low power consumption for Power over Ethernet Output 50 ohms / Balanced Male XLR: (PoE) applications. External power supply included for 500 mV RMS (-4 dBu nom) +12 dBu max LAN connections without PoE capability. RJ50 Proprietary interface to Remote Jack: JK Audio products

Removable screw terminal block: Remote Header: Call, Drop, Ring/OH LED, GND (x2) PoE (Power over Ethernet) Power: ACCESSORIES or +9 VDC with included AC power supply Size: 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm) RA2™ Rack Mount Panel The RA2 holds two AutoHybrid IP2s in a 1U rack space. Weight: 1.2 lbs (0.5 kg)

NETWORK

Next: Professional Digital Hybrids >> 15 REMOTE CONTROL INTERFACES

Guest Module 1™ FEATURES Remote Keypad »» Compatible with Broadcast Host, innkeeper LTD, and innkeeper 1rx This little time-saver gives you call control you »» DTMF Keypad simply can't get with an auxiliary telephone and »» Keypad Disable Switch a couple of switches. An »» Talk/Dial Button 8 pin RJ45 modular cable provides remote power so »» Hang-up Button there is no need for batteries or an external power pack. The Call button will flicker »» Ring/Call LED when a call comes in. Press this button to answer »» Passive Design or place a call. The button will stay lit when a call is (No Battery or AC Required) present. When you dial on-air, the tones go out on the line, and do not come back mixed with the dial tone or caller signal. SPECIFICATIONS Guest Module 1 was designed exclusively for: Size: 4.75" x 3.4" x 2" (12 x 8.6 x 5 cm) Broadcast Host, innkeeper LTD, or innkeeper 1rx Weight: 11 oz (300 g)

FEATURES »» Compatible with innkeeper 1rx, innkeeper 2 and innkeeper 4 Digital Hybrids

»» Ring Indicator for Each Line »» Call, Drop, Hold, Flash RIU-IP™ »» Dialing Remote IP Interface »» Conference (innkeeper 2) The RIU-IP is a remote control interface designed for innkeeper 1rx, 2 and 4 digital hybrids. This unit »» Adjust Transmit and Receive level per line contains a web server which lets you send and receive (innkeeper 2 & 4) control data through a web browser. RIU-IP can be »» Auto-Answer on/off connected to a computer NIC card for direct control, to a switch or hub for network control, or to an »» Auto-Answer Ring Count (innkeeper 2 and 4) ethernet port with internet access. »» Test Tone Start/Stop per Line RIU-IP was designed exclusively for: Innkeeper 1rx, innkeeper 2 & 4 »» Master Send Configuration (innkeeper 2 and 4) »» Presence On/Off (innkeeper 1rx) SPECIFICATIONS »» Caller Ducking On/Off (innkeeper 1rx) Control connection: RJ-45 Ethernet port »» Automatic Gain Control on/off (innkeeper 1rx) Digital Hybrid Connection: RJ-50 RS-232 Serial Connection: DB9 (9600,8,N,1) Size: 5" x 3.25" x 1.125" ( 13 x 9 x 3 cm) Weight: 1 lb. (450 g) 16 FEATURES innkeeper LTD™ »» Enable/Disable Auto-Answer Digital Auto-Answer Hybrid »» Excellent Separation of Caller and Talent Voice Go digital for more desirable quality. Compared to the AutoHybrid, the innkeeper LTD auto- »» 16-bit DSP technology answer/disconnect hybrid allows you to send line level signals into the phone line while maintaining greater »» Proprietary Auto Null Algorithm separation between the talent's voice and the caller. (50 dB null) The balanced XLR output jack contains only the caller’s »» Front Panel Off-Hook LED voice, making this the perfect companion to mixers, consoles, and PA systems that demand talk show »» Send XLR Line Input quality audio from a phone line. »» Caller XLR Line Output 16-bit DSP Technology. The digital hybrid »» Send and Caller Signal Level LEDs connects audio signals to a standard analog telephone line without the transmit / receive crosstalk common »» Guest Module 1 Remote Control Jack to analog hybrids. Its Digital Signal Processor »» Rack Mountable (DSP) continuously monitors both the phone line and audio signals to deliver excellent separation.

This proprietary, dual-convergence echo canceller HYBRIDS DIGITAL POTS algorithm can achieve excellent separation, typically SPECIFICATIONS exceeding 50 dB, without any setup and without Input sending a noise burst down the line. While this may sound complicated, it’s all done automatically during 20k ohms / Balanced Female XLR: 500 mV RMS; -4 dBu nom.; +12 dBm max every call. Output 200 ohms / Remote Control. Control innkeeper LTD with the Balanced Male XLR: 500 mV RMS; -4 dBu nom.; +14 dBu max Guest Module 1. See pg 16.

Phone Line: RJ11C Aux Phone: RJ11C Ringer: 0.8B REN Isolation: 1500 VAC Frequency Response: Telephone Side 200 Hz-3600 Hz Power: 120-240 VAC power supply (included) GUEST MODULE 1 Size: 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm) Weight: 2.7 lbs (1.2 kg)

ACCESSORIES RA2™ Rack Mount Panel The RA2 holds two innkeeper LTD's in a 1U rack space.

Next: More Professional Digital Hybrids >> 17 FEATURES 1x i2 i4 innkeeper 1rx™ »» Excellent Separation of Caller and Digital Hybrid • • • Talent Voice A Hybrid Jam-Packed with Features. »» 16 bit DSP Technology • • • This single-line hybrid is perfect for radio or television talk shows, teleconferencing, or auto-answer IFB »» Auto-Answer (Switchable On/Off) • • • feeds. From the front panel you can call, drop and adjust headphone volume. Front panel LEDs display

POTS DIGITAL HYBRIDS »» Proprietary Auto Null Algorithm • • • (50 dB null) signal levels and option status. The Send and Caller Volume controls and feature switches are hidden »» Conferencing • behind an access panel to prevent unauthorized “tweaking”. innkeeper 1rx is compatible with Guest »» AGC, Ducking, Presence • Module 1 and RIU-IP remote control interfaces. For Talk Show applications combine innkeeper 1rx with »» 1 kHz Tone Generator • • • the Concierge 2x6 Switch Core and Guest Module »» Memory/Speed Dial • • GM2x6 ( on page 21).

»» Alpha-Numeric Keypad • • Automatic Gain Control (AGC). Adjusts the caller volume to an average level. AGC will tame a loud »» Menu with Backlit LCD Display • • caller, and boost a quiet caller or quiet long distance »» Send XLR Line Input 1 2 4 connection.

»» Mic/Line Switch • Caller Ducking. Drops the Caller output level by 9 dB whenever the host speaks. This keeps the host “in »» Master Send XLR • • charge” of the show, automatically making sure the »» Caller XLR Line Output 1 2 4 caller never overpowers the host by attempting to talk over the host’s voice. »» Mix Out XLR Line Output • Presence. Press the “Presence” button to get a »» Front Panel 1/4" Headphone Jack • richer sound from the caller’s voice. This digital filter »» Monitor Handset Jacks 2 4 brings back some of the low-end lost in transmission. »» Remote Control via Screw Terminals Remote Control. Control innkeeper 1rx with the • • • or RS-232 Guest Module 1, Screw Terminals, a RS-232 cable or the RIU-IP Remote IP Interface. See pg 16. »» RIU-IP Remote IP Interface • • • »» Monitor Speaker Terminals • »» Send and Caller Signal Level LEDs • • • »» Send and Caller Volume Controls • • •

1x: innkeeper 1rx, i2/4: innkeeper 2 & 4

OR GUEST MODULE 1

18 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 innkeeper 2 & 4™ SPECIFICATIONS Multi-Line Digital Hybrids 1x Input 1k ohms / 15 mV RMS; -34 dBu nom.; Female XLR: Mic/Line Pad Switch = +6 dBu max When a Single Line Hybrid Isn't Enough. Innkeeper 2 / innkeeper 4 squeeze two/four Output 200 ohms / Male XLR: independent digital hybrids in a 1U rack space to 500 mV RMS; -4 dBu nom.; +14 dBu max extract each caller's voice into separate channels. 1/4" Stereo Headphone: 8 ohms, 250 mW per channel Each phone line has an individual send and receive Speaker: Screw Terminals, 8 ohms, 1 watt XLR jack. While this should be enough for most applications, there are several applications that Size (1x): 1.75" x 7.3" x 10.5" (4.5 x 18.6 x 26.7 cm) require a “Master” audio input. This additional XLR (1rx): 1.75" x 7.3" x 19" (4.5 x 18.6 x 48.3 cm) input mixes with the audio of the individual channel Weight (1x): 5.2 lbs (2.4 kg) send jacks. By default, the master input will mix (1rx): 5.7 lbs (2.6 kg) into all four channels. The front panel menu system allows you to turn off the master signal from any or i2/4 Input all phone lines. For Talk Show applications combine 20k ohms/ Balanced Female XLR: innkeeper 2 with the Concierge 2x6 Switch Core and 500 mV RMS; -4 dBu nom.; +10 dBu max Guest Module GM2x6 ( on page 21). Output 200 ohms/

Balanced Male XLR: HYBRIDS DIGITAL POTS Menu System. The front panel keypad, display, 500 mV RMS; -4 dBu nom.; +10 dBu max Front panel handset jacks biased for Handset: and handset jacks provide easy speed dialing and call electret handset (not included) setup. The menu driven keypad and back-lit display allows you to store 50 phone numbers by name in a Size: 1.75" x 7.3" x 19" (4.5 x 18.6 x 48.3 cm) phone list. You can also use the display to set features Weight: 7.2 lbs (3.2 kg) such as the number of rings before auto answer, master send channel selection, and test tone output. Phone Line: RJ11C Aux Phone: RJ11C innkeeper 2 Conferencing. Innkeeper 2 has a Ringer: 0.8B REN convenient conference feature that joins two active Isolation: 1500 VAC phone calls together. Menu options determine how

1x + i2/4 Frequency Response: Telephone Side 200Hz-3.6kHz the conference is joined, providing several options to 120-240 VAC 50-60Hz power supply Power: ease mix-minus setup. (internal)

Remote Control. Control innkeeper 2/4 with the 1x: innkeeper 1rx, i2/4: innkeeper 2 & 4 RIU-IP Remote IP Interface. See pg 16.

Back: innkeeper 2 innkeeper 4 is the same, with additional lines and XLR inputs/outputs.

Need more lines? | Next: Concierge Talk Show System >> 19 Concierge™ Talk Show System

Guest Module™ FEATURES Control Surfaces »» LED Line Selection Buttons Simple on the Outside. Up to eight Guest »» Next, Previous, Hold & Drop Functions Module control surfaces can be added to provide remote control of the switch matrix over CAT5 cable. »» Auto Answer Guest Modules are hot swappable without losing calls, »» Conference Calling (not on GM1x6) and feature line selection buttons that change color to indicate call status. Guest Modules are available in »» Hot-Swappable GM1x6, GM2x6, and GM1x12 desktop and rack mount versions. They feature durable aluminum and steel »» Aluminum and steel construction construction with a sealed rubber keypad. »» DTMF Keypad

GM: Guest Modules, C: Concierge 2x6

20 Concierge 2x6™ FEATURES Switch Core »» 6 Phone line jacks The Heart of the System. »» 2 Hybrid Connections The new Concierge™ 2x6 switch core routes six incoming analog phone lines to JK Audio innkeeper »» Hold Audio Input 1rx™ or innkeeper 2™ Digital Hybrids. Concierge adds »» Expandable to 2 x 12 Lines music on hold input, auxiliary phone integration, and intuitive call control. Two Concierge switch cores can »» LED Line Status Indicators be bridged together, providing six additional phones lines for a 2 hybrid, 12 line system. »» Front Panel DIP switches TALK SHOW SYSTEM SHOW TALK

2nd CONCIERGE GUEST MODULE

INNKEEPER INNKEEPER

SPECIFICATIONS GM GM1x6, GM2x6, GM1x12 C Power: 120-240 VAC power supply (included)

Size: 9.5” x 3.5” x 1.2” ( 24 x 9 x 3 cm ) Phone Line: RJ11

Weight: 1.25 lbs ( 0.5 kg ) Isolation: 1500 VAC GM1x6r, GM2x6r, GM1x12r Frequency Response: Telephone Side 200Hz-3.6kHz Size: 19” x 3.5” x 1.2” ( 48 x 9 x 3 cm ) Size: 1.75” x 7.3” x 19” ( 4.5 x 18.6 x 48.3 cm ) Weight: 1.75 lbs ( 0.8 kg )

Next: Field Interview Tools >> 21 MIC 00:00:00 L R

PLAY/REC CODEC OR MENU

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M

FEATURES R1 BP RemoteMix One™ »» HD Voice (Wide-Band Speech) • • Field Interview Tool

FIELD INTERVIEW »» Bluetooth Wireless Technology • A Little One On One. »» 3-conductor 2.5mm Headset Interface • RemoteMix One™ performs live man-on-the-street interviews through your cell phone and can provide »» 4-conductor 3.5mm Headset Interface • two-way IFB connections through a cell phone or notebook for truly flexible remote monitoring. »» Headphone, Mic, and • • Line Input Level Controls Wireless Phones and Notebooks: »» XLR Mic Input • • Connect to cell phones and notebooks through the wired headset jack. A 3.5 mm stereo line input jack »» Mic Mute Switch • allows recordings to be mixed into the broadcast. The 3.5 mm stereo line output jack provides your full »» 3.5mm Stereo Line Input • • bandwidth microphone signal on the left channel and the return audio on the right channel. »» 3.5mm Stereo Line Output • • »» ¼" Stereo Headphone Jack • • Use as a headset replacement for normal voice calls, or transmit full bandwidth audio using third party »» >10 Hours on one 9V Alkaline Battery • CODEC apps. Interchangable interface cables connect to most phones and notebooks. »» >20 Hours on one 9V Alkaline Battery •

R1: RemoteMix One, BP: BluePack

22 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 MIC 00:00:00 L R

PLAY/REC CODEC OR MENU

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M

BluePack™ SPECIFICATIONS Wireless Interview Tool Input When it Gets Down to the Wire. And one Female XLR: 2k ohms / -34 dBu nom. of your cables has gone rogue, it's time for field 1/8" (3.5mm) Stereo: 20 k ohms / -10 dBu nom. R1 + BP reporting that is a little more portable. Don't get Output wrapped up in unnecessary cables. BluePack allows 1/8" (3.5mm) Stereo: 100 ohms / -10 dBu nom. live man-on-the-street interviews through a cell phone 1/4" Stereo Headphone: 8 ohms, ½ watt per channel equipped with Bluetooth Wireless Technology. Size: 4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm)) Wireless Phones and Notebooks: Weight: 10 oz (275 g) BluePack pairs to your cell phone like a Bluetooth FIELD INTERVIEW Bluetooth Wireless Technology wireless headset. BluePack also pairs to Bluetooth BP equipped sound cards and music players in full Standard: 3.0 bandwidth stereo A2DP mode. A 3.5 mm stereo line Distance: 65 ft (20 m) input jack allows recordings to be mixed into the HF = full duplex voice, 300Hz – 3.4kHz broadcast. Frequency Response: HF (HD) = full duplex HD voice, 50Hz – 7kHz A2DP = 30Hz – 17kHz, master to slave The 3.5 mm stereo line output jack provides your full bandwidth microphone signal on the left channel and Bluetooth audio on the right channel. Like any phone call, live interviews are limited to 3.4 kHz voice bandwidth back to the station. However, this output allows you to make a full bandwidth recording to bring back to the station or send over the web.

Next: Remote Broadcasting >> 23 ComPack™ Universal Telephone Audio Interface Remotely Anywhere. OR Pick up this new handheld road tool to get audio in and out of analog phone lines, PBX systems, even cell

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * , . ALT 7 8 9 ? ! Z X N M $ phones. Perfect for Remote Broadcasts, IFB feeds, or C V B OR interviews over any phone connection.

Wireless Phones and Notebooks. Simply plug

1 2 3

4 5 6 7 8 9 ComPack into the 2.5 mm or 3.5 mm headset jack of 0* # your wireless phone or notebook computer. Your cell phone will recognize ComPack as a headset which will disable the internal mic and speaker.

PBX Systems. Unplug the handset from any analog or digital PBX phone and plug the coily cord into ComPack. You can now send and receive audio through the PBX telephone set.

FIELD INTERVIEW Analog Phones. Plug ComPack into an RJ-11 jack, go off-hook and dial, or answer an incoming call. OR OR Add a Phone Line to the Party Line. ComPack INTERCOM also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin male XLR to your wet party FEATURES line. This provides a full duplex, always-on connection to any telephone network. »» HD Voice (Wide-Band Speech) Compatible »» Works with Analog and Digital PBX or VoIP Phones »» 3-conductor 2.5mm Headset Interface »» 4-conductor 3.5mm Headset Interface SPECIFICATIONS »» Headphone, Mic, and Line Input Level Controls Input Female XLR: 1k ohms / 15 mV RMS; -34 dBu nom.; »» XLR Mic Input *(Mic/Line Switch) Mic/Line Pad Switch = +6 dBu max 1/8" (3.5mm) Stereo: 20 k ohms / 250 mV RMS; -10 dBu nom. »» XLR Line Output Output *(Switches to Com Link) Male XLR: 600 ohms / 45 mV RMS; -25 dBu nom. »» 3.5mm Stereo Line Input 1/4" Stereo Headphone: 8 ohms, 1/2 watt

»» ¼" Stereo Headphone Jack Phone Line: RJ11C Isolation: 1500 VAC »» Transmit Clip LED Ringer LED: 0.9B REN »» Battery Test LED Keypad: DTMF 9 volt battery » DTMF Keypad and Lockout Switch Power: » AC power supply 120-240 VAC (included) »» Handset Selector Switch Size: 8" x 3" x 2.2" (20.3 x 7.6 x 5.6cm) (Electret, Carbon, Dynamic) Weight: 1.5 lbs (680 g)

»» >20 Hours on one 9V Alkaline Battery

JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 RemoteMix 2™ FEATURES Broadcast Field Mixer »» HD Voice (Wide-Band Speech) Compatible

The Handy, Compact Mixer. RemoteMix 2 is »» Two XLR Mic Jacks a two-channel field mixer / headphone amplifier »» Mic/Line Pad on Channel 2 that’s a little more hands-on in the remote broadcast environment. We’ve tightened the belt on this one. »» Two ¼” Headphone Jacks with It may be smaller but we didn’t skimp out on the Individual Level Controls good stuff. RemoteMix 2 provides a communications interface for remote broadcast, IFB, or a backup audio »» 3.5 mm Send and Receive Jacks path. The integrated headphone amplifier provides »» LED VU Meter sidetone to monitor all inputs as well as an external feed. RemoteMix 2 features a phone line hybrid with »» Phone Line Hybrid with DTMF Keypad keypad along with a wired notebook/cell phone headset interface. These parts were designed to work »» Wired Phone Headset Interface together, saving setup time and wiring in the field. (2.5mm & 3.5mm Interfaces) »» Dual 9 Volt Batteries TV - Use a Phone Line or Wireless Phone for »» 100-240 VAC External AC Real Time Production Monitoring. RemoteMix BROADCASTING REMOTE Power Supply 2 Combines a small front-end mixer with two powerful ¼” headphone outputs. Send and receive interview audio while pulling IFB off the phone line, cell phone SPECIFICATIONS or notebook. Input Female XLR Mics: 2k ohms / -25 dBu nom (Mic/Line pad switch = +6 dBu max) Radio - Perfect for live remotes. Use it as a 1/8” (3.5mm) Stereo Line: 20k ohms / -10 dBu nom front-end mixer for your POTS, VoIP or smart phone codec. Or, use it as a phone line hybrid, calling in to Headphone Cue 1/4”: 20k ohms / -10 dBu nom your studio talk show hybrid. Output Balanced Male XLR: +16 dBu max, 20Hz - 20kHz, +/- 1dB 1/8” (3.5mm) Stereo: 100 ohms / -10 dBu nom

MIC 00:00:00 L R OR PLAY/REC MENU Headphone 1/4” Stereo: 8 ohms / 1/3 watt per channel

Phone Line Connector: RJ11C Ringer: 0.5B REN Isolation: 3750 VAC 100-240 VAC, 50-60Hz Power: or Two 9 VDC batteries OR Size: 7.75” x 6.5” x 2.3” CODEC Weight: 2.1 lbs (960 g) CUE

CODEC # OR 1 _ - + @ 2 3 ( ) Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M IP

Next: More Field Mixers >> 25 RemoteMix 3.5™ Broadcast Field Mixer

3.5 4 More than just a field mixer. FEATURES These are universal communications interfaces.

REMOTE BROADCASTING »» HD Voice (Wide-Band Speech) • • RemoteMix 3.5 and RemoteMix 4 feature a phone line hybrid and keypad, a PBX handset interface, and both »» XLR Mic Jacks 3 4 wired and wireless cell phone interfaces. »» Switchable 48 volt phantom power • for each mic input Radio. Perfect for sports remotes. These field mixers can be used as a phone line hybrid, calling into your »» Mic/Line pad on channels 3 & 4* • • studio talk show hybrid, or as a front-end mixer for your POTS, VoIP, or smart phone codec. »» ¼” Headphone Jacks with 3 4 Individual Level Controls TV. RemoteMix 3.5 and RemoteMix 4 give you the »» 3.5 mm Send and Receive Jacks • • ultimate phone connectivity with multiple ¼” IFB headphone feeds. Send and receive interview audio »» LED VU Meter • • and pull IFB out of any business phone system, even »» Phone Line Hybrid with DTMF Key- your cell phone or notebook. • • pad with Redial

»» Universal PBX Handset Interface • • »» Wired Phone Headset Interface • •

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * ” DEL (2.5mm & 3.5mm Interfaces) 4 5 6 / : ; ’ A S D J K L F G H MIC * 7 , . ALT 8 9 ? ! $ Z X C V B N M 00:00:00 L R

PLAY/REC

MENU »» Bluetooth Wireless Technology • • D OR »» Bass Boost • »» Dual 9 Volt Batteries • • »» 100-240 VAC External AC • • Power Supply E

B C * RemoteMix 3.5 only has a Mic/Line pad on Channel 3. A OR

1 2 3

CODEC 4 5 6 CUE

7 8 9

# _ + @ 1 2 3 ( ) - 0* # Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M

OR IP

CODEC

26 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 RemoteMix 4™ Broadcast Field Mixer

Great Sound. In our remote field mixers, a soft SPECIFICATIONS limiter prevents overdriving the phone line interfaces, Input while the mixer's XLR output is pre-limiter (full Female XLR Mics: 2k ohms / -25 dBu nom range). Convenient 3.5 mm send and receive jacks for (Mic/Line pad switch = +6 dBu max) recording the show, or mixing in your MP3 player. 1/8” (3.5mm) Stereo Line: 20k ohms / -10 dBu nom Exclusive to the RemoteMix 4, Bass Boost adds Headphone Cue 1/4”: 20k ohms / -10 dBu nom some low end before sending the signal down the Output phone line. Balanced Male XLR: +16 dBu max, 20 Hz - 20 kHz, +/- 1dB 1/8” (3.5mm) Stereo: 100 ohms / -10 dBu nom Power Smart Design. Low noise, low power ICs Headphone 1/4” Stereo: 8 ohms / 1/3 watt per channel are used throughout either of these mixers to preserve battery life. The low noise 100-240 VAC desktop style Bluetooth Wireless Technology power supply (included) overrides the battery power HF = full duplex voice, 300Hz – 3.4kHz only when the supply is actually providing power. If Frequency Response: HF (HD) = full duplex HD voice, 50Hz – 7kHz A2DP = 30Hz – 17kHz, master to slave BROADCASTING REMOTE the power goes out, the batteries automatically cut Distance: 33 ft (10 m) in. The phantom power generator in the RemoteMix 4

only runs if any of the rear panel 48 V switches are set Phone Line Connector: RJ11C to “ON”. PBX Interface: RJ22 Ringer: 0.5B REN Isolation: 1500 VAC 100-240 VAC, 50-60Hz or

# 1 _ + @ MIC Q 2 3 ( ) - Power: O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * . A 7 , 00:00:00 LT 8 9 ? ! $ Z X C V B N M L OR Two 9 VDC batteries R

PLAY/REC

MENU D Size: 9.5” x 8” x 3” Weight: 3.8 lbs (1.72 kg) Talk about backup... Five ways to get the signal back to the station.

A. Dial in with the internal phone line hybrid, E B. Connect through any PBX or VoIP telephone through the Universal Handset Interface, B C A C. Plug into the headset jack of your phone or notebook, OR D. Pair to any Bluetooth audio device E. Use as a front end mixer for your CODEC. 1 2 3

CODEC 4 5 6 CUE

7 8 9

# _ + @ 1 2 3 ( ) - 0* # Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M

OR IP

CODEC

Next: More Field Mixers >> 27 RemoteMix x4™ 4 Channel Field Mixer

Mix It Up. RMx4 combines a four-channel field FEATURES mixer with a four-channel headphone amplifier. After »» Four Low Noise, High Headroom, XLR mic inputs all, what good is a field mixer if you don’t have a (Mic/Line Switches on Channels 3 & 4) flexible monitoring capability for the whole crew?

FIELD MIXERS Great Sound. A soft limiter prevents overdriving »» Individually Switchable 48v Phantom Power the full-duplex headset interface, while the master »» 120 Hz Low Cut Filter XLR and 3.5 mm outputs are pre-limiter (full range). Line level cue input to the headphones make RMx4 a »» Master XLR Output 20 Hz – 20 kHz perfect companion to your codec or recorder. »» Four ¼” Headphone Jacks with Convenient. 3.5 mm send and receive jacks for Individual Source Selector and Level Controls recording or playing back recorded material. Separate headphone level and source selection controls for »» ¼” Headphone Cue Input each headphone output. Monitor just the clean mixer output, or the Cue input plus the mix. »» Phone Headset Interface with 3.5 mm TRRS plug Power Smart Design. Switchable 48V Phantom Power on each mic input. Powered by 1 or 2 hot- »» 3.5 mm Stereo Line Input swappable 9V batteries that automatically kick in if »» 3.5 mm Send and Receive Jacks AC power goes down. Low noise, low power ICs are used throughout to preserve battery life. The 100-240 »» LED VU Meter VAC desktop style power supply (included) overrides the battery power only when the supply is actually »» Hot Swappable Dual 9V Batteries providing power. and 120-240 VAC External Power Supply Radio. RMx4 is designed for news and sports remotes. Use it as a front-end mixer for your POTS, ISDN, IP or smart phone codec. XLR out, ¼” return to headphones. TV. RMx4 is designed for ENG, Sports, and interviews, with four ¼” headphone outputs. 3.5 mm TRRS provides 2-way IFB audio from your cell phone or notebook.

28 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 MIC 00:00:00 L R

PLAY/REC MENU OR

CODEC CUE

CODEC

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M OR

SPECIFICATIONS Input Output FIELD MIXERS 2k ohms / -25 dBu nom 50 ohms / +16 dBu max Female XLR Mics (4): Channel 3 & 4 have -40 dB Mic/Line pad switch Balanced Male XLR: 20 Hz - 20 kHz +/- 1dB Line = 50k ohms / +20 dBu max 0.04% THD @ +16 dBu Phantom Power: 48 VDC with 6.8k ohm supply resistance 1/8” (3.5mm) Stereo: 100 ohms / -10 dBu nom 1/8” (3.5mm) Stereo Line: 20k ohms / -10 dBu nom Headphone 1/4” Stereo: 8 ohms / 1/3 watt per channel 1/4” Headphone Cue: 20k ohms / -10 dBu nom 100-240 VAC, 50-60Hz or Power: Two 9 VDC batteries Size: 9.5” x 8” x 3” Weight: 3.6 lbs (1.6 kg)

Crowd too loud? | Next: IFB Listen-Only Monitoring >> 29 RemoteAmp™ Mono Headphone/Earpiece Amplifier

Cuts through the Crowd Noise. The RemoteAmp is a simple battery-powered personal headphone amplifier. Use the RemoteAmp as an IFB earpiece or headphone amplifier. This low-distortion, 1 watt amplifier will cut through the crowd noise without distortion. RemoteAmp Two™ The RemoteAmp clips to your Stereo Headphone Amplifier belt and accepts a 3-pin XLR audio input from a mixer. Mono IFB Plus Stereo Audio Input. You’ll like the convenient RemoteAmp Two provides a listen only connection features, such as the for mono IFB or full bandwidth stereo music listening. separate power switch, Separate volume controls for the XLR and 3.5 mm line which allows you to leave input jacks allow a simple mix of mono and stereo the volume control set sources. The XLR line level input accepts either a at a comfortable level. balanced mono signal, or a party line intercom feed (listen-only). The ½ watt, ¼” stereo headphone jack

LISTEN-ONLY IFB will cut through any crowd noise.

RA R2 OR FEATURES FOUR IFB »» Compatible with • Party-Line Intercoms SPECIFICATIONS »» XLR Line level Input • • » XLR Line In Volume Control RA Input » • • 4k ohms / »» 3.5 mm Stereo Line Input Jack • Female XLR: 100 mV RMS; -18 dBu nom.; +12 dBu max; 46 dB maximum gain »» 3.5 mm Line In Volume Control • Output 1/4" Stereo Headphone: 8 ohms, 1 Watt max »» 1/4" Stereo Headphone Jack • • 3.5 mm Mono Earpiece: 150 ohms, 100 mW nom. »» 3.5 mm Earpiece Jack • • Size: 5.1 x 2.7 x 1.3 inch (13 x 6.9 x 3.3 cm) »» Stainless steel belt clip • • Weight: 10 oz. (275 g) »» >20 Hours on one 9V Battery • • Input Female XLR: 20k ohms / 0 dBu nom. R2 3.5 mm Stereo: 20k ohms / -10 dBu nom. Output 1/4" Stereo Headphone: 8 ohms, ½ watt per channel 3.5 mm Mono Earpiece: 100 ohms, 40 mW

Frequency Response: 20 Hz – 20 kHz Power: One 9 volt Alkaline Battery Size: 4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm) OR Weight: 10 oz. (275 g) INTERCOM RA: RemoteAmp, R2: RemoteAmp Two OR FOUR IFB

30 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 WIRELESS INTERCOM SOLUTIONS

EXTENDED RANGE INTERCOM INTERFACES

ADD A WIRELESS HEADSET Leave your beltpack behind. BlueSet plugs into the BlueSet™ Interloop™ headset jack of your existing belt pack. Interloop connects to the existing Party Line intercom system like any other belt pack. Pair either of these with a BSET-HS1 oryour exisiting wireless headset for an extended range of mobility, unrestricted by the cables. page 33 page 34

INTERCOM-TELECOM LINK

CONNECT TO A MOBILE PHONE BlueSet™ Interloop™ BlueSet and Interloop connect to a wireless phone allowing remote access or a backup telecom connection.

page 33 page 34

CONNECT TO A VOIP, POTS OR INTERFACES INTERCOM MOBILE PHONE LINE Interchange is the missing link between your Party Interchange™ Line intercom and the telecom world. Connect Interchange to a JK Audio AutoHybrid IP2 for VoIP access. Connect Interchange to a JK Audio innkeeper Digital Hybrid for POTS lines. Use the headset page 32 interface with your mobile phone when POTS and VoIP are not an option.

BRING A BELTPACK AND HEADSET WITH YOU FOR...

INTERCOM ACCESS ANYWHERE Outerloop is your beltpack for the other side of the Outerloop™ telecom link. Connect your favorite wired intercom headset to Outerloop to use your headset anywhere. Pair Outerloop with BlueSet or Interloop, or pair to your mobile phone to call into an Interchange Intercom Phone Bridge. page 35

Next: Intercom Interfaces >> 31 Interchange™ FEATURES Intercom Phone Bridge »» HD Voice (Wide-Band Speech) Compatible »» Male and Female 3 pin XLR Intercom loop jacks The Missing Link. Interchange allows remote access to your party-line »» Male and Female 3 pin XLR 4-wire jacks intercom through JK Audio Innkeeper Series Digital Hybrids. This professional half rack interface provides »» Male XLR Mix Line Out for Monitoring a four wire audio interface and remote control INTERCOM INTERFACES connection for JK Audio innkeeper LTD, innkeeper 1rx, »» Send and Receive LED metering or innkeeper 2 Digital Hybrids for POTS lines. Likewise, »» Front panel screwdriver level controls couple a JK Audio PBXport with an Interchange for PBX/VoIP lines. The front panel headset interface jack »» Front panel Channel Select allows easy connection of your cell phone, tablet, or computer allowing remote access through a wireless »» Front panel cell phone interface phone or conferencing app. »» Listen always, Talk when Talk-Enabled Interchange contains a sophisticated intercom hybrid »» Intercom and phone hybrid powered in a low noise pro audio design. The Listen-Always design allows both the phone hybrid / 4-wire connection and the cell phone headset interface to SPECIFICATIONS monitor the intercom just like any other belt pack. XLR Intercom Channel Listen mode is a high impedance bridging tap on the intercom line. Talk mode is enabled via a front Output Level: 0 dBu ( 775 mV ) nominal panel switch, either Off, On, or Auto. Auto follows Terminating Impedance: 200 ohms the phone hybrid Auto-Answer mode. Talk mode Bridging Impedance: >15k ohms uses a solid state relay to properly couple Talk audio Pin 1: Common from the phone line and cell phone interfaces, to the Pin 2: Audio + 30 VDC ( +12 VDC min ) 50 mA intercom channel. Pin 3: Audio Input The Innkeeper 2 conference feature allows two callers 20k ohms / Balanced Female XLR: to share one intercom connection. Alternatively, 500 mV RMS (-4 dBu nom) +12 dBu max the included cables allow Line 1 and Line 2 of Output the Innkeeper 2 to be connected to two separate 200 ohms / Balanced Male XLR: Interchange™ units, allowing connection to separate 500 mV RMS (-4 dBu nom) +12 dBu max intercom loops. Size: 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm) Weight: 1.2 lbs (0.5 kg)

ACCESSORIES RA2™ Rack Mount Panel The RA2 holds two Interchanges in a 1U rack space.

INTERCOM HYBRID

32 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 BlueSet™ FEATURES Wireless Headset Interface »» HD Voice (Wide-Band Speech) Communications Unleashed. »» Electret / Dynamic Headset Compatibility These headset interfaces plug directly into most Party- »» 3.5 mm Mic Level Output Line (PL) belt packs, replacing the wired headset. A 3.5 mm stereo headset jack contains a mic level »» Mini USB Power Jack output signal suitable for recording, with the beltpack headphone signal on the left channel, and the »» >10 hours on Internal Li-Ion Battery Bluetooth return signal on the right. A switch selects »» Trim Pot adjusts Bluetooth Return between connection to a 3rd party Bluetooth headset or a cell phone. SPECIFICATIONS Headset Connect: Leave your belt pack on the desk as you walk around the room. Some Bluetooth Output headsets allow you to switch between two phones, or 1/8” (3.5mm) Stereo: 1000 ohms / 15 mv RMS; -34 dBu nom. in this case, switch between your intercom and your Bluetooth Wireless Technology cell phone. Standard: 3.0

Distance: 50 ft (15 m) INTERFACES INTERCOM Phone Connect: Pair BlueSet to your cell phone HF = full duplex voice, 300Hz – 3.4kHz Frequency Response: to grant remote access to the Party-Line for a distant HF (HD) = full duplex HD voice, 50Hz – 7kHz member. The belt pack Mic/Talk button controls audio Battery: Internal Lithium-Ion Polymer rechargeable from the cell phone into the intercom system. Power: 120-240 VAC power supply (included)

Size: 1.1” x 4.4” (2.8 cm x 11.2 cm) Intercom Headset Compatibility: Female and Male XLR four and five pin versions available: Weight: 2.1 oz (60 g) BlueSet-F5, BlueSet-M5, BlueSet-F4, BlueSet-M4.

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D J K L # F G H 1 _ + @ * 7 , . Q 2 3 ( ) - ALT 8 9 ? ! W I O P Z M $ E R T Y U X C V B N * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M

Extend your intercom | Next: More Wireless Party-Line Solutions >> 33 INTERCOM

# _ + @ # _ + @ 1 2 3 ( ) - 1 2 3 ( ) - Q O P Q O P W E R T Y U I W E R T Y U I * EL * EL 4 ’ ” D 4 ’ ” D A 5 6 / : ; A 5 6 / : ; S D F G H J K L S D F G H J K L * 7 , . * 7 , . ALT 8 9 ? ! ALT 8 9 ? ! $ $ Z X C V B N M Z X C V B N M

FEATURES IL OL Interloop™ Wired/Wireless Intercom BeltPack »» HD Voice (Wide-Band Speech) • • INTERCOM INTERFACES »» 2.4 GHz Encrypted Digital Wireless • Stay in the Loop. Interloop™ works with industry standard Two-Wire, »» 3-pin XLR Male and Female • Party-Line intercoms, connecting to the existing Intercom Jacks intercom system like any other belt pack. Utilizing Bluetooth Wireless Technology, a rear panel switch »» Connects to Bluetooth Headsets, • selects Headset or Phone connection. Headset mode Phones, & Notebooks allows you to connect to a Bluetooth enabled headset »» Uses Standard Intercom Headsets • for wireless freedom. Phone mode allows you to connect to a wireless phone to let others join in, or »» 4-Pin and 5-Pin Male or Female connect to a notebook or laptop to provide remote • Headset Jacks voice access using VoIP applications such as Skype™. »» Send and Receive Volume Controls • • Battery Backup. »» PTT Button • • Powered by the intercom system, yet uses less current than a typical belt pack. Includes 9 VDC battery »» Intercom Powered with 9 Volt backup, holding the wireless connection while • Battery Backup changing cables. »» > 10 hours On One 9 Volt • Increased Range. Battery Backup While Interloop™ will work with any Bluetooth enabled headset, most headsets were designed to IL: Interloop, OL: Outerloop work a short distance from the phone. JK Audio Outerloop and BlueSet offer increased range and performance making it the perfect match.

34 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 OUTERLOOP-M

OR OR

# _ + @ 1 2 3 ( ) - Q O P W E R T Y U I * EL 4 ’ ” D A 5 6 / : ; S D F G H J K L * 7 , . ALT 8 9 ? ! $ Z X C V B N M

Outerloop™ SPECIFICATIONS Wireless Intercom BeltPack IL XLR Intercom Channel Output Level: 0 dBu ( 775 mV ) nominal In the Loop, Out of Bounds. Terminating Impedance: 200 ohms Outerloop™ functions as a wireless link to your Bridging Impedance: >15k ohms intercom system. This universal belt pack provides Pin 1: Common connections for your existing 4-pin or 5-pin intercom headset, routing audio through your mobile device Pin 2: +30 VDC ( +12 VDC min ) 35 mA over a Bluetooth wireless connection. Use your cell Pin 3: Audio phone to call into your intercom phone bridge or OL Model Outerloop-F station phone coupler for a global wireless link. Headset: 4-pin Female XLR, 5-pin Female XLR Model Outerloop-M Universality. Adapting to Headset: 4-pin Male XLR, 5-pin Male XLR INTERFACES INTERCOM the mixed-up intercom world, model OTL-F features both Headset Microphone 4-pin and 5-pin Female XLR Impedance: 50-2000 ohms headset jacks, while model Headset Earpiece OTL-M features both 4-pin Load Impedance: 50-600 ohms and 5-pin Male XLR headset Power: >50 mW into 150 ohms jacks. Easy-to-use send Bluetooth and receive level controls, a push-on, push-off Talk Standard: 3.0 button, as well as a recessed sidetone level control. All IL + OL Profile: Hands Free (HF) the comforts of a standard belt pack whether you are Distance: 65 feet (20 Meter) HF = full duplex voice, 300Hz – 3.4kHz around the corner or around the world. Frequency Response: HF (HD) = full duplex HD voice, 50Hz – 7kHz IL: Intercom System & 9 VDC Battery Backup Outerloop also features a switch that selects between Power: pairing to a phone or to a headset. In Phone mode, OL: 9 VDC Battery Outerloop pairs to your cell phone or computer just Size: 4.7” x 3.75” x 1.65”(12 x 9.5 x 4.2 cm) like any other Bluetooth headset. In Headset mode, Weight: 10 oz ( 275 g ) you can pair to another Outerloop or to a standard Bluetooth headset, providing a short range secure wireless point-to-point intercom. Outerloop-to- Outerloop connections default to HD Voice (120 Hz to 7 kHz) bandwidth. Outerloop also offers increased range and performance with JK Audio Interloop and BlueSet. Many new Bluetooth wireless cell phones and headsets also provide HD Voice bandwidth.

35 JK Audio 1311 E 6th Street Sandwich, IL 60548 USA

Address Service Requested

RMx4™ 4 Channel Field Mixer Mix It Up

Great Sound and Greater Monitoring. Low Power Smart Portability. Switchable 48V noise, high headroom mic preamps and a 120 Phantom Power on each mic input. Powered Hz low cut rumble filter. Powerful headphone by dual hot-swappable 9V batteries that auto- amps drive four 1/4” IFB headphone outputs. matically kick in if AC power goes down Monitor the mics, cue input, or IFB return from a cell phone or laptop.

RemoteMix x4™

Pg 28

© 2016 JK Audio, Inc. 1-800-JK-Audio jkaudio.com Printed in the USA 9/14 1-800-552-8346 • 1-815-786-2929 [email protected] To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 JK Audio Se Habla Español