DOCSLIB.ORG

Proto® XL Series Pliers (P21304)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Proto® XL Series Pliers (P21304) J260SGXL XL SERIES PLIERS J278XL Exclusive Flush Fastener provides better access with increased user adjustability making it 30% narrower. Flush Fastener allows pliers to lay flat in the work place and prevents snagging on tool belts/pouches. Flush Fastener is a nut and bolt assembly and can easily be adjusted by the end user in the field. TONGUE & GROOVE Jaws are milled with deep self-gripping pipe wrench style teeth for maximum bite. Accurately machined undercut tongue and groove points for precision movement and joint strength. COMBINATION SLIP-JOINT Jaws are milled with deep, sharp, lobster claw design that give two gripping areas with each position. Combination pliers have shear type cutters Non-gripped versions are complemented with deep, strong, drop forged knurled impressions making it non-slip. The impressions can also be used to file off a burr when on the go! OVERALL JAW THICKNESS JAW WIDTH JAW LENGTH PRODUCT # DESCRIPTION LENGTH (IN) (IN) (IN) (IN) WEIGHT (LBS) J261SGXL Groove Joint Pliers w/Grip - 5" 5 15/64 3/4 31/32 0.15 J262SGXL Groove Joint Pliers w/Grip - 7" 7 3/8 1-19/64 1-43/64 0.50 J260SGXL Groove Joint Pliers w/Grip - 10" 10 27/64 1-19/32 2-3/32 0.94 J264SGXL Groove Joint Pliers w/Grip - 12" 12 33/64 2-1/2 2-45/64 1.95 J265SGXL Groove Joint Pliers w/Grip - 16" 16 33/64 3-3/32 3 2.60 J276GXL Slip-Joint Pliers w/Grip - 6" 6-1/2 13/32 1-1/4 1-27/32 0.50 J2766XL Slip-Joint Pliers w/Natural Finish - 6" 6-1/2 13/32 1-1/4 1-27/32 0.45 J278GXL Slip-Joint Pliers w/Grip - 8" 8 13/32 1-5/16 2-3/32 0.64 J278XL Slip-Joint Pliers w/Natural Finish - 8" 8 13/32 1-5/16 2-3/32 0.60 J280GXL Slip-Joint Pliers w/Grip - 10" 10 31/64 1-13/32 2-11/64 0.90 J2800XL Slip-Joint Pliers w/ Natural Finish - 10" 10 31/64 1-13/32 2-11/64 0.90 WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. ©2014 Stanley Black & Decker, Inc. • 2195 East View Parkway, Suite 103, Conyers, GA 30013 P21304 1.800.800.TOOL · Fax: 1.770.648.9108 · protoindustrial.com XL SERIES J228GXL PLIERS SOLID JOINT J226GXL Jaws are milled with sharp, accurate teeth. Induction hardened cutting edges, equally aligned for precision cut. All cutting pliers designed with near flush cutting action. Accurately machined joints assembled with permanent rivet for strength and precision movement. Pliers with teeth on inside joint are milled parallel with plier halves for perpendicular grab while pulling wire, fish tape, etc. J209GXL Scan the QR code above for more J225GXL information about Proto® XL Series Pliers. OVERALL LENGTH JAW THICKNESS JAW WIDTH JAW LENGTH PRODUCT # DESCRIPTION (IN) (IN) (IN) (IN) WEIGHT (LBS) J206GXL Diagonal Cutting Pliers w/Grip - 6" 6-1/10 7/16 49/64 27/32 0.35 J209GXL Heavy Duty Diagonal Cutting Pliers w/Grip - 7" 7-1/4 29/64 1-11/64 49/64 0.50 J210AHGXL Heavy Duty Diagonal Cutting Pliers w/Grip - 8" 8-1/4 29/64 1-11/64 51/64 0.40 J226GXL Needle Nose Pliers w/Side Cutter - 6" 6-1/4 25/64 11/16 1-15/16 0.30 J225GXL Curved Needle Nose Pliers w/Grip - 6-3/4" 5-5/8 13/32 11/16 7/8 0.30 J228GXL Needle Nose Pliers w/Grip - 8" 8 7/16 13/16 2-15/64 0.40 J268GXL Linemans Pliers w/Grip - 8" 8-3/4 9/16 1-13/64 1-33/64 0.90 WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. ©2014 Stanley Black & Decker, Inc. • 2195 East View Parkway, Suite 103, Conyers, GA 30013 P21304 1.800.800.TOOL · Fax: 1.770.648.9108 · protoindustrial.com 7 ALL NEW SETS AVAILABLE! XL SERIES PLIERS J260XLS 5 PIECE GROOVE JOINT WITH GRIP SET J261SGXL - Groove Joint Pliers w/ Grip - 5” J262SGXL - Groove Joint Pliers w/ Grip - 7” J260SGXL - Groove Joint Pliers w/ Grip - 10” J200XLS J264SGXL - Groove Joint Pliers w/ Grip - 12” J265SGXL - Groove Joint Pliers w/ Grip - 16” J200XLS 4 PIECE CUTTING/PLIERS SET J278GXL - Slip-Joint Pliers w/ Grip - 8” J228GXL - Needle Nose Pliers w/ Grip - 8” J209GXL - Heavy Duty Diagonal Cutting Pliers w/ Grip - 7” J260SGXL - Groove Joint Pliers w/ Grip - 10” J276XLNFS J202XLS 3 PIECE ELECTRICian’S PLIERS SET J268GXL - Linemans Pliers w/ Grip - 8” J206GXL - Diagonal Cutting Pliers w/ Grip - 6” J228GXL - Needle Nose Pliers w/ Grip - 8” J262XLS 2 PIECE GROOVE JOINT WITH GRIP SET J202XLS J262SGXL - Groove Joint Pliers w/ Grip - 7” J260SGXL - Groove Joint Pliers w/ Grip - 10” J276XLS 3 PIECE SLIP-JOINT WITH GRIP J276GXL - Slip-Joint Pliers w/ Grip - 6” J278GXL - Slip-Joint Pliers w/ Grip - 8” J280GXL - Slip-Joint Pliers w/ Grip - 10” J276XLNFS 3 PIECE SLIP-JOINT NATURAL FINISH J2766XL - Slip-Joint Pliers w/ Natural Finish - 6” J278XL - Slip-Joint Pliers w/ Natural Finish - 8” J2800XL - Slip-Joint Pliers w/ Natural Finish - 10” J201XLS 5 PIECE ASSORTED PLIERS SET J278GXL - Slip-Joint Pliers w/ Grip - 8” J260SGXL - Groove Joint Pliers w/ Grip - 10” J260XLS J209GXL - Heavy Duty Diagonal Cutting Pliers w/ Grip - 7” J226GXL - Needle Nose Pliers w/ Side Cutter - 6” *Not all sets shown above. J268GXL - Linemans Pliers w/ Grip - 8” WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. ©2014 Stanley Black & Decker, Inc. • 2195 East View Parkway, Suite 103, Conyers, GA 30013 P21304 1.800.800.TOOL · Fax: 1.770.648.9108 · protoindustrial.com .
Load more

Recommended publications
  • Fish Tapes, Accessories & Conduit Tools
    FISH TAPES, ACCESSORIES & CONDUIT TOOLS Innovative, high quality solutions for wire pulling and conduit bending PULL FISH BEND For Professionals...Since 1857® 49’ 50’ ! INTRODUCING Exclusive PENDING Laser-Etched Fiberglass Fish Tapes Laser-Etched MarkingsPATENT Unique sloped handle optimizes the position of your hand for quick hand-over-hand rewinds and allows a more level tape payout. 7 Raised fingergrips NON-CONDUCTIVE PERMANENT 1' MARKINGS DURABLE LEADER 5 8 help transfer 100% of the 1 winding power from your hand and fingers. E The Advantages of C N Laser-Etched Markings I S Polypropylene case • Laser-etched in 1' increments allowing and handle are extremely you to more accurately measure the S durable and offer the maximum depth of conduit runs. L in shock and impact resistance. O • Descending markings let you know right away how much tape is left to pay out. O T • Laser-etched markings are permanent. Y They won’t rub or scratch off. T FISH TAPES, ACCESSORIES & CONDUIT TOOLS CONDUIT & ACCESSORIES TAPES, FISH I The round inner ring design L provides a smooth, consistent A and comfortable surface for U winding and rewinding. Q All dimensions are in inches and (millimeters) unless otherwise specified. WARNING: Do NOT use any fish tape on or near live circuits. WARNING: Wear approved eye protection when feeding, pulling or rewind- Use extreme caution when working near any electrical equipment. ing fish tape. Laser-etched markings are also available WARNING: Use on a safeKlein work® positionSteel toFish avoid Tapes. loss of balance when using fish tape. 2 WARNING: Never remove screws while fish tape is coiled inside reel.
    [Show full text]
  • KNIPEX Mini Catalog
    KNIPEX Quality – Made in Germany Mini-Catalog The KNIPEX brand stands for reliability in every single tool. If you need a tool to get the job done the first time, every time, make sure to select KNIPEX. In this mini-catalog, you will find the most popular and highly sold tools designed to meet the various needs of professional tool users. With a limited lifetime warranty for every tool, you can’t go wrong in adding a quality tool like KNIPEX to your toolbox. www.knipex-tools.com KNIPEX Quality – Made in Germany Cobra® Water Pump Pliers 87 02 180 87 01 250 > Self-gripping jaw design won’t slip > Gripping surface with special hardened teeth (approx. 61 HRC) is wear resistant and grips any shaped object – round, square, hex or flat 87 01 560 > Self-locking on pipes and nuts means no slipping off the workpiece > Patented push-button mechanism means adjust Round Square Hex Flat once and it stays > Fine-adjustment provides an optimum adjustment to different size workpieces > Guard prevents finger and hand pinching > Thin head fits into tight spaces Maximum Adjustment KNIPEX Part # Description Capacity Positions Handle Style 87 00 100 4" Cobra Pliers 1" 11 embossed 87 01 125 5" Cobra Pliers 1 1/16" 13 plastic dipped 87 01 150 6" Cobra Pliers 1 1/4" 11 plastic dipped 87 01 180 7 1/4" Cobra Pliers 1 1/2" 18 plastic dipped 87 02 180 7 1/4" Cobra Pliers 1 1/2" 18 comfort grip 87 01 250 10" Cobra Pliers 2" 25 plastic dipped 87 02 250 10" Cobra Pliers 2" 25 comfort grip 87 21 250 10" Cobra QuickSet Pliers 2" 25 plastic dipped 87 28 250 US 10" Cobra Pliers 2" 24 1000V insulated 87 01 300 12" Cobra Pliers 2 3/4" 30 plastic dipped 87 02 300 12" Cobra Pliers 2 3/4" 30 comfort grip 87 21 300 12" Cobra QuickSet Pliers 2 3/4" 30 plastic dipped 87 01 400 US 16" Cobra Pliers 3 3/4" 27 plastic dipped 87 01 560 US 22" Cobra Pliers 4 3/4" 20 plastic dipped Alligator® Water Pump Pliers 88 01 180 88 02 180 88 08 250 US > Self-gripping jaw design won’t slip 88 01 300 > Gripping surface with special hardened teeth (approx.
    [Show full text]
  • Spanners and Wrenches
    Spanne rs and Wrench es - the various types open spanners - ring spanners - adjustable - box spanner - socket allen keys - torque wrench - pipe wrench - basin spanner - tips Spanners come in all shapes and sizes, many being developed to deal with a specific job. By far the most important consideration when using a spanner is to ensure that it fits the nut perfectly. Too loose, and it will round the comers of the nut - and slip, often damaging the nut. Spanner and your hand. When purchasing spanners, select good quality tools. The best types are forged from carbon steel or chrome vanadium, if not abused, these will last a lifetime. Open ended - 'C' spanner The open ended spanner is the most common type, and may have a single or double end. The head has its jaws offset by about 15 degrees from the run of the shaft. This is so the spanner can be turned over to engage different flats of a nut when working in confined spaces. Another version, called an obstruction spanner, is designed for use in confined spaces. It has one head set at anything upto 90 degrees to the shaft, and the shaft may have a slight curve. Ring spanner As the name implies, the ring spanner usually has a completely enclosed head, and may have six or 12 flats. A 12 flat spanner engages upon the corners of the nut and can engage both hexagon and square bolts. A six flat spanner is normally shaped to fit against all 6 sides of hexagon nuts, this ensures a very tight fit and can allow considerable force to be applied.
    [Show full text]
  • P-5505 Popular Grounding Products.Indd
    POPULAR GROUNDING PRODUCTS FOR ELECTRICAL TRADESMEN grounding products Meet the requirements of today’s electrical code with popular grounding products from IDEAL. GROUNDING TAILS 9-IN-1 RATCH-A-NUT™ SCREWDRIVER • Patented Wire Connector Wrench accepts a wide variety of connectors and reduces finger fatigue • Pro-quality, 28 tooth, all metal ratchet can • Ensures compliance with Article 250 of the handle 225 lbs. of National Electrical Code torque without failure • Ultra-flexible lead wire and bonding jumpers • Ergonomic, slip-free textured grip provides excellent make for fast and efficient pigtailing torque and is impervious to perspiration, gas, oil and • Thread-forming, hole finding grounding screw chemicals • Stranded tail SKUs feature heavy-duty fork terminal to easily • Bits included: 1/4 in. Slotted, 3/16 in. Slotted, attach to device grounding screw #1 Phillips, #2 Phillips, 1/4 in. Nutdriver, 5/16 in. Nutdriver and 7/16 in. Nutdriver Solid Wire Grounding Tails Qty./Pkg. Part No. • Replacement bits available 12 AWG solid, 6.5" tail w/loop & Box of 50 30-3404 ground screw and stripped end Description Part No. 12 AWG solid, 8 in. tail w/loop & Box of 50 30-3392 9-in-1 Ratch-a-Nut™ Screwdriver ground screw and stripped end 35-988 12 AWG solid, 8 in. tail w/loop & Plastic Box 30-3399 ground screw and stripped end of 100 COMBO HEAD™ CUSHIONED- 12 AWG solid, 10 in. tail w/loop & GRIP SCREWDRIVER Bag of 50 30-3410 ground screw and stripped end • Designed to accurately and 12 AWG stranded, 8 in. tail w/#10 securely fit most Bag of 25 30-3184 fork & #10 ring and ground screw fasteners • Patented design ensures full fastener GROUNDING SCREWS engagement • Zinc-plated grounding screws offer a thread-forming, hole-finding feature Blade Handle Overall Part plus combination hex, Phillips, Slotted Description and Robertson head Length Length Length No.
    [Show full text]
  • Call GUS!GUS! 1-800-245-83391-800-245-8339 Order U N Online D Today! E R D Georgiaunderground.Net G R O U N
    AerialAerial InstallationInstallation Aerial Hardware | Strand and Wire | Cable Lashers | Drills | Fall Protection Buckets, Pouches, Trays and Aprons | Aerial Hand Tools | Lay-up Sticks, Wire Lifters and Height Sticks | Blocks, Guides and Swivels | Cable Benders Pullers | Reel Stands | Ladders Pulling Cable Grips | Swivels O R G I A G E CallCall GUS!GUS! 1-800-245-83391-800-245-8339 Order U N Online D Today! E R D georgiaunderground.net G R O U N version 07.07.19 Table of Contents Aerial Hardware ..................................................................4 Strand and Wire .................................................................10 Cable Lashers and Drills. 11 Lay-up Sticks, Wire Lifters and Height Sticks ........................................11 Fall Protection ..................................................................12 Buckets, Pouches, Trays and Aprons ...............................................13 Aerial Hand Tools ...............................................................14 Blocks and Guides ..............................................................20 Cable Benders, Pullers, Reel Stands and Ladders ....................................22 Pulling Cable Grips and Swivels ...................................................23 3 Aerial Hardware Bell Spacers Weaver K-1 Stainless Steep Strandvises Bonding Clamp Straps AED 100-0016-02 1/2” AED 2125 AED 34-08912 10” AED 5100 AED 100-0016-02 3/4” AED 34-08922 16” Screw Anchors Band Mounting Square Nuts Square Washers Plates AED 6526WCA 6” Helix, AED D-510
    [Show full text]
  • Operation and Safety Instruction Manual
    OPERATION AND SAFETY INSTRUCTION MANUAL Models: 8-18-50 8-18-50K* 8-18-100 8-18-100K* 8-18-150 8-18-150K* *Includes Accessory Kit Attached To Canister Wee Buddy® With Accessory Kit Wee Buddy® Without Accessory Kit Read and understand these operating and safety instructions before using or servicing this equip- ment. Failure to follow instructions could result in an accident causing serious injury. Do not allow chil- dren or untrained personnel to use this equipment. Follow your company installation procedures. General Information The Wee Buddy® fiberglass fish tape features a highly visible, non-conductive fiberglass fish tape made of a solid fiberglass core rod with a protective polymer jacket (1/8” total outside diameter). This lightweight and compact unit is ideal for all general conduit fishing. Available with or without accessory kit. SAFETY FIRST WARNING Do not use on live circuits. Electric shock may result. The Buddy® is equipped with a metal tip. Do not use on or near live circuits. Electric shock may occur. Disconnect power. • The minimum bending radius of Wee Buddy® fish tape is 1.5”. Do not attempt to bend the tape beyond the recommended radius. • Keep secure footing. Protect yourself from the possibility of falling should the pulling eye move suddenly or separate from fish tape. • Check for damage prior to using fish tape. Cracks, gouges, nicks, white stress marks on jacket or sharp bends will weaken fish tape. Injury could result if tape breaks while being pulled. • Do not use slip joint pliers, locking pliers or powered pulling equipment on fish tape.
    [Show full text]
  • Essential Tools for Contractors
    2016 CONTRACTOR RESOURCE ESSENTIAL PRODUCTS FOR CONTRACTORS Insulated Tools Holemaking Test & Measurement Safety Equipment Cable & Bolt Cutters Wire Pulling & Conduit Tools Power Tool Accessories Work @ Height Pliers Torque Wrenches / Screwdrivers These days, it can be hard to find companies that make TABLE OF CONTENTS products you can count on. But that’s exactly what you’ll get from Pliers with Tether Ring 1 Klein Tools. We don’t just make great products, we make great products Fish Tapes, Lubricants & Accessories 2 that stand up to the demands of the Conduit Benders, Fish Rods & Accessories professionals who use them every day. 3 Because our standards are as high as Low Voltage Wire Pulling yours, we demand that every product we 4 offer delivers all the performance, Holemaking 5 durability and precision that you need to get the job done right. Test & Measurement and Accessories 6-7 And by using only the highest quality Electrical Testers materials, superior workmanship, and 8 keeping our manufacturing as close to Torque Tools 9 home as we can, we’re able uphold those rigorous standards. Power Tool Accessories 10-11 Klein isn’t just the name of our company, Personal Protective Safety Equipment / Gloves it’s also our family name, so we have to 12-14 be proud of everything we make. And Insulated Tools 15-16 since we’re an American company that’s been family-owned and family-run, since Cable Cutters 17 1857, you know you can count on us to be here tomorrow. Bolt Cutters 18 So buy a Klein tool and you’ll know what Reference Guide 19-20 all the professionals know…when you pick up a Klein, it’ll never let you down.
    [Show full text]
  • United Rentals Tool Solutions Catalog
    United Rentals Tool Solutions Catalog UnitedRentals.com | 800.UR.RENTS © 2017 United Rentals, Inc. 38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM Tool Solutions Products 38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM TABLE OF CONTENTS Cooling, Ventilation & Vacuum ........... 2-3 Piping................................................. 21-25 Sanders & Grinders................................42 Air Horns .....................................................2 Flange Spreaders......................................24 Angle Grinders & Sanders ........................42 Blowers ................................................... 2-3 Hydrostatic Test Pump Air........................21 Hand Sanders ...........................................42 Cooling Fans...............................................2 Geared Threader.......................................21 Belt Sanders..............................................42 Cooling Trailers ...........................................2 Threading Machines..................................21 Saws .................................................. 43-44 Vacuums .....................................................3 Pit Bull.......................................................22 Reciprocating Saws ..................................43 Rolling Unit................................................22 Air Tools ................................................ 4-7 Band Saws................................................43 Track Unit..................................................22 Texas Pneumatic Ventilation
    [Show full text]
  • The Dictionary of Entomology
    THE DICTIONARYOFENTOMOLOGY. Original text Copyright © 1914 Nigel K. Jardine probably expired. Ihav e made manyattempts to determine the copyright status of the orginal work. In 1914 in England, copyright extended for the life of the author,plus fify years. Ihav e attempted to obtain biographical material for N. K. Jardine without success, nor have I been able to locate an obituary for him, and so without knowing the year of his death it is not possible to determine when the copyright of the original work expired. When I consulted a firm of copyright lawyers, theytoo were unable to determine theyyear the copyright expired. Their advice was that the copyright of the original work has most probably expired. If anyreader has more acurate information about N. K. Jardine or the copyright status of the original work, I would appreciate receiving it at the address below. The original was printed in 10 point type on a 12 point pitch. The page images in this PDF file are approximately 1.6 times the size of the original. Facsimile images and retouching Copyright © 2001, 2003 Peter Miller The pages of this electronic copyofThe Dictionary of Entomology may be used and/or printed free of charge for personal use only.You are permitted to copyand distribute verbatim copies of this CD-Rom free of charge. In particular,this copyright notice must remain intact. Please contact Peter Miller at the address belowfor permission to redistribute on anyother basis or include in anyother medium or compilation. Adonation of $20 would be appreciated if you find this work useful.
    [Show full text]
  • Greenlee's Professional Hand Tools Continues to Grow with an Even Larger Collection of Products
    Hand Tools The success of Greenlee's professional hand tools continues to grow with an even larger collection of products. Each Greenlee hand tool is "Made for the Trade" and each kit and accessory has been carefully assembled to meet the demanding requirements of today's professional electrical contractor. Contents Pliers 4 Cutting, Stripping & Crimping 8 Screw & Nut Drivers 11 Wrenches 21 Insulated Drivers 25 Cutting Tools 27 Tape Measures, Levels, Hammers & Flashlights 31 Tool Bags, Pouches, Belts & Work Gloves 34 Tool Kits 40 MADE FOR THE TRADE!™ MADE FOR THE TRADE!™ Pliers High Leverage Side-Cutting Pliers • High leverage pliers design and diamond-serrated jaws for optimum cutting and gripping performance. • Forged from chrome vanadium steel for greater durability and strength. • Precision-machined and laser-hardened blades strengthen cutters and provide consistent performance. • Effectively cuts hardened wire, ACSR, bolts, screws and nails. • Through-hardened steel for longer life. • Exceeds ASME/ANSI specifications. • Rugged riveted construction for smooth precise action. • Lifetime limited warranty. • Note: This is not an insulated tool. 0151-09SM Stripping Only • Stripping hole allows for easy and convenient wire stripping of #12 AWG wire (0151-09SM & 0151-09SD only). • The wire looping hole perfectly forms wire for threaded connections 0151-09SD (0151-09SM & 0151-09SD only). Hand Tools Crimping Only • Crimping die for non-insulated connectors, lugs and terminals. Fish Tape Pulling Only • Pulls 1/8" and 1/4" fish tape. Molded Grip Only • Custom grip allows area for user identification. 0151-09M • Slip-proof, ergonomic molded grips for increased comfort and reduced user fatigue. • Wider grip design provides larger load bearing area.
    [Show full text]
  • OVER 500 PRODUCTS INSIDE... All Prices and Part Numbers Are Correct at Time of Printing
    THE YIELD Agricultural Engineers Since 1894 PARTS THE BIGGESTALL BRANDS IN ONE PLACE GUIDE £71.96 INC VAT Draper Page 16-19 Ledlenser Page 4 OFFER £179.10 INC VAT Squire Locks Page 30 Buckler Boots Stihl Page 10-11 Page 24-30 OVER 500 PRODUCTS INSIDE... All prices and part numbers are correct at time of printing. Summer 2021 | www.peacock.co.uk 04 LEDLENSER 05 Our aim is simple, CTEK to provide quality 06 products to farmers OVERALLS 08-09 & farm contractors at the best CASTLE CLOTHING possible pricing with off the shelf 10-11 availability. Our parts departments BUCKLER BOOTS 14-15 carry over 40,000 shelf lines with a stock value in excess of £4 DRAPER - POWER TOOLS 16 million. We welcome all enquiries from new and existing customers DRAPER - HAND TOOLS 17 including large buying groups and DRAPER - ACCESSORIES cooperatives. 20 STIHL - CHAINSAWS 21 Stephen Bradford STIHL - HEDGERS 22 Group Parts Manager STIHL - GRASS TRIMMERS 23 STIHL - BLOWERS Our depots 24 STIHL - KOMBI 25 Brigg The Old Foundry, Brigg, STIHL - MOWERS 26 North Lincolnshire, DN20 8NR t. 01652 600 200 STIHL - OILS & LUBRICANTS 28 Corringham HAYTER High St, Corringham 29 Gainsborough, Lincolnshire DN21 5QP AUTOGLYM 30 t. 01427 838 696 SQUIRE LOCKS 31 Halsham Halsham, Hull, HU12 0BT WÜRTH 01964 614 233 t. AgriculturalSince 1894Engineers 2nd Quarter 2021 | www.peacock.co.uk Louth QUALITY USED MACHINERY Contents MF9380 Page 12 MF9380 T MF7282 AL HEADER Welcome 02 Quality Used Machinery 03 Agricultural Engineers Grimsby Rd, Louth Summer Combine Demonstration 04-05 Since 1894 IT’S ALL Serving your Furry Friends 06 Meet the Team - Selby Parts 07 ABOUT..
    [Show full text]
  • Pliers, Clamping, & Cutting
    PLIERS, CLAMPING, & CUTTING TABLE OF CONTENTS XL SERIES PLIERS . 742-743 LOCK JOINT PLIERS . .744 POWER-TRACK® II PLIERS . .745 ASSORTED PLIERS SETS . .746 NEEDLE-NOSE PLIERS . 747-748 CUTTING PLIERS . 749-752. LINEMAN'S PLIERS . 752-753. SPECIALTY PLIERS. 754 MINIATURE PLIERS . 755. LOCKING PLIERS . 756-762. LOCKING C-CLAMPS . 762-765 SAFETY WIRE TWISTERS. 766 WIRE STRIPPERS & CUTTERS . .767 AUTOMOTIVE PLIERS . 768-769. RETAINING RING PLIERS SETS . 770-772 RETAINING RING PLIERS . 773-774 1000V PLIERS . 775-781. HACKSAW . 782. C-CLAMPS . 782-784 EYE BOLTS . 785. SNIPS . 785-787 . MULTI-PURPOSE TOOLS . .787 KNIVES. 788 PROTO® STAINLESS STEEL ELECTRICIAN'S SCISSORS A handy electrician's tool that can accomplish common tasks like stripping, crimping, cutting, and snipping from thin delicate wires to thicker multi-core cables, conveniently locked on the belt until needed. Ergonomic handles with hole for tethering. Built-in wire stripper can strip and crimp for AWG 12, 14 and 16 cables. Stainless steel construction. Includes a holder with a quick release button and a belt clip. Cuts multi- wire cables and snips tiny wires. Micro anti-slip teeth on blades for better cutting grip. SAFETY WIRE PLIERS Safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration and other forces. The presence of safety wiring also serves to indicate that the fasteners have been properly tightened. Safety wire is available in a variety of gauges and materials, depending on the application. In aircraft and racing applications, stainless steel wire is used, most commonly in .032" diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored to a second fastener or part, then twisted again.
    [Show full text]