DOCSLIB.ORG

Enhancing System Solutions

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Enhancing System Solutions Enhancing System Solutions FUJITSU MICROELECTRONICS EUROPE Enhancing System Solutions Services Automotive Multimedia Mobile Communications Networking/Telecoms Here at Fujitsu Microelectronics Europe (FME) we are engaged in an on-going program of responding to the changing nature of the “European market. We provide state-of-the-art semiconductor devices and leading-technology plasma and liquid crystal display panels. But, more than that, we endeavor to develop systems solutions in partnership with our customers while at the same time, we try to broaden the scope of our operation and genuinely add value wherever possible. The global perspective Fujitsu is a world leader in customer-oriented IT and communications solutions concentrated on three areas: software & services, hardware platforms and electronic devices. Our global goal is to focus on customer needs, quality, timeliness and management speed. 25 years of experience in Europe Over the past 25 years we have established ourselves in the major European markets of Automotive, Networking/Telecoms, Mobile Communications, Multimedia and Industrial & Home appliances through a special blend of technical experience and applied expertise. What’s more, FME continues to drive technologies forward to meet the ever-increasing demands of tomorrow's applications – in which Europe leads the world! ” Shimpei Hirata President Fujitsu Microelectronics Europe GmbH Dreieich-Buchschlag / Frankfurt / Germany 2 Industrial & Home Appliances Flat Panel Displays Quality Environment Local Support European Offices Enhancing System Solutions ujitsu’s traditional corporate strengths, in markets ranging from together with re-use of intellectual property and a company-wide Finformation technology to telecommunications and from displays system solution focus, benefits the fastest-growing sectors of the to semiconductors, have helped it become one of the world’s leading information age. suppliers for the Broadband Internet era. Our mission – to offer customers products that meet their needs, quickly and efficiently – The FME ASIC design group concentrates on developments is achieved by exploiting key competitive advantages, keeping comprising all semiconductor technologies leading to closely in touch with the world’s markets, and offering products that systems-on-a-chip (SoC). Through the use of virtual components, meet local needs through long-established operational bases design time is minimised and the re-use of IP is locally in the USA, Asia and in Europe. maximised. FME’s microprocessor IC technology is being harnessed to provide creative solutions As a pivotal part of this global multidisciplinary in key applications, especially in automotive organisation, Fujitsu Microelectronics and home appliances. It includes Europe (FME) develops and supports general-purpose 8, 16 and 32-bit highly value-added solutions for target microcontrollers and a family of graphic sectors, using its European technology processors, as well as specialised expertise as the foundation for solutions integrated circuits for peripheral control. spanning the total value chain. FME focuses on markets where Europe leads by FME’s Mixed Signal strengths in innovation such as automotive, mobile architecture optimisation and data communications, networking/ telecoms, converter development enable improved industrial & home appliances and multimedia, system performance in telecoms and access together with flat panel displays for consumer products, applications, which depend critically on mixed infotainment systems and industrial/medical applications. signal technology. This integrated solutions approach to technology is underscored by innovative components, IP and display products, backed by Europe based design, software and application support. Technology Focus Marketing and technology expertise is focused on specialist groups, dedicated to application-specific ICs, microcontrollers, and mixed- signal and RF devices, working closely with customers and third parties. Through these groups, the complete integration of design and production processes is applied across all semiconductor market sectors. This strategy of skills & technology integration, 3 Enhancing System Solutions Services Automotive Multimedia Mobile Communications Networking/Telecoms Services ME’s customers and partners in Europe are supported by a systems like electronic data interchange, enterprise resource comprehensive array of design, development, manufacturing planning and Internet/Extranet solutions provide up-to-the-minute Fand integrated IT services. information on demand. This ensures increased data accuracy and reliability enabling lower costs, reduced cycle times and Drawing upon the expertise and resources of the Fujitsu group to smaller inventories. provide world-class technology and platform products, we use our multinational presence to deliver locally optimised solutions for FME also offers local programming and taping services, mainly for customers in all corners of the world. Flash MCU, and can support VMI (Vendor Managed Inventory), which entails delivering parts to a consignment warehouse at Design Services/IP/SoC customers’ premises under specified conditions. We can also Engineering strength is employed in FME’s European Design Centres arrange special transport or logistics according to specific needs located in Frankfurt & Munich, Germany, and Maidenhead in the UK. of customers. Focused on microcontrollers, ASICs, Multimedia and Telecom development, RF and mixed signal design, they deliver localised Application software and system packages for sales, design service for European customers, ensuring optimum use purchasing, development, warehousing and of resources and minimum time to market. customs & excise processes are fully integrated and linked to an EDI system to Throughout worldwide Fujitsu operations, use of third- forge an application-to-application EDI with party vendor tools and Fujitsu’s own CAD tools ensure an our partners. innovative and mature design flow, providing customers with a global network for system development and support. Furthermore, to facilitate automation of business documents exchange, FME offers customers EDI For custom and semi-custom designs, FME provides the latest in services to include support of classical order cycle and SoC cores designed for the wireless and network access VMI scenarios – both EDIFACT standard – and the implementation ASIC markets. The company’s extensive line of re-usable building of RosettaNet PIPs based on mutual agreement. blocks ranges from complex microprocessors to mixed-signal functionality cores. Manufacturing Fujitsu’s many sites in Japan and overseas ensure it remains an ideal With IPWare™ and other Fujitsu tools, customers can integrate cores partner for customers. The Group’s global business activities provide optimised for performance, routability, and flexible integration into a steady supply of products and services in response to customer the chip environment, which helps get them to market ahead of needs. Four world-class Japan-based production facilities cater for the competition. global semiconductor production, while wholly or partly Fujitsu owned subsidiaries supply FME with LCDs and plasma displays. Integrated IT FME also works actively to help forge links between customers and Throughout the design-to-delivery process, customers benefit from cost-effective end-product manufacturing units. Fujitsu’s global IT systems and infrastructures. Standards-based 4 Industrial & Home Appliances Flat Panel Displays Quality Environment Local Support European Offices Automotive urope leads the world in automotive electronic systems, with leading control, automation and real-time environments. locally developed vehicles incorporating more and more Interoperability will be boosted by hardware and software under Eadvanced electronics, supported by specialist suppliers and development in line with AUTOSAR standards. reliable, innovative technologies from FME. Partnership for innovation Our solutions cover key areas of innovation such as: vehicle body FME is delivering end-to-end systems through a comprehensive control and comfort systems, chassis control and instrumentation network of partnerships: Working closely with vehicle clusters; driver information and passenger entertainment systems. manufacturers, Tier 1 suppliers and third-party specialists to create Solutions that range right through the supply chain – from highly advanced automotive platforms. sophisticated hardware solutions such as gyro-sensors, microcontrollers, graphic display controllers, power management For example, as a member of the FlexRay™ consortium, FME is and multimedia devices, through software and working to develop next-generation automotive by-wire hardware development tools, software drivers, applications. It is also in partnership with real-time operating systems and leading vendors creating reference designs connectivity, to reference designs with for in-car entertainment using the application software. MOST® (Media Oriented Systems Transport) networking technology. Development & integration Offering reliable embedded FME is the first-choice Flash memory, together with automotive electronics partner LIN and CAN interfaces, and right through the design-to- FlexRay™ and MOST in the production cycle. future, Fujitsu’s MCUs form part of a well-established solution for automotive applications. Along with our graphic display controllers, advanced MPEG devices and gyro sensors, they allow low part-count, high-availability
Load more

Recommended publications
  • Fujitsu Data Book 2008.10
    History of Fujitsu ●Business Developments● ●Product Development● Jun 20, 1935 1935 ～ ◦Fuji Tsushinki Manufacturing Corporation, the company that later becomes Fujitsu Limited, is born as an Aug 1937 offshoot of the communications division ◦Fuji Tsushinki Manufacturing Corporation becomes Japanese Ministry of Fuji Electric. The new company is of Telecommunications-designated company for production of carrier capitalized at ￥3 million and has 700 equipment. employees. The first president was ◦Delivery of first carrier equipment order to South Manchuria Railways Manjiro Yoshimura, then president of Co. Fuji Electric. 1940 Sep 1938 ◦Delivery of the first Japanese-made T-type automatic telephone ◦Groundbreaking begins for construction of a new plant switchboard to the Nara Telephone Exchange. in Nakahara Ward, Kawasaki City, on the site of the present Kawasaki Research & Manufacturing Facilities. Dec 1945 ◦Fuji Tsushinki is granted government recognition by Japanese Ministry of Telecommunications as an officially approved telephone developer and manufacturer. May 1951 ◦Production of electronic computing machines begins. Apr 1942 ◦Suzaka Plant opens for mass production of telephones. Aug 1953 ◦Manufacture of radio communications equipment begins (Kawasaki Nov 1944 Plant). ◦Kanaiwa Kousakusho Co., Ltd. (now Fujitsu Frontech Limited) becomes part of the Fujitsu Group. Apr 1954 ◦Production of electronic devices begins (Kawasaki Plant). May 1949 ◦Stock is listed on the newly reopened Tokyo Stock Oct 1954 Exchange. ◦Japan’s first relay-type, automated electronic computer, the FACOM 100, is completed. Jun 1957 ◦Shinko Electric Industries Co., Ltd. becomes part of the Dec 1956 Fujitsu Group. ◦Japan's first NC is completed. Nov 1959 Sep 1958 ◦Oyama Plant opens for mass production of radio ◦First FACOM200 parametron computer is completed.
    [Show full text]
  • Fujitsu to Split Off HDD Business in Reorganization
    Fujitsu Limited Fujitsu to Split Off HDD Business in Reorganization Tokyo, May 21, 2009 – Fujitsu Limited (“Fujitsu”) today announced that it will split off its hard disk drive business (“HDD business”) and merge the business into its wholly owned subsidiary, Toshiba Storage Device Corporation (“Toshiba Storage Device”), through a simple absorption-type separation, on July 1, 2009. In a transaction scheduled for July 1, 2009, Fujitsu will then sell 80.1 percent of its shares of Toshiba Storage Device to Toshiba Corporation (“Toshiba”). By the end of December 2010, Fujitsu plans to sell its remaining 19.9 percent to Toshiba, at which point Toshiba Storage Device will become a wholly owned subsidiary of Toshiba. 1. Objectives of the Corporate Split On April 30, 2009, Fujitsu Limited signed a definitive agreement with Toshiba to transfer ownership of its HDD business. This corporate split is part of the implementation of the ownership transfer. 2. Outline of the Corporate Split (1) Schedule May 21, 2009 Signing of corporate split contract July 1, 2009 (scheduled) Effective date of corporate split This corporate split, pursuant to Article 784 (3) of the Corporate Law, will be executed without the requirement of the approval of a General Meeting of the Shareholders as stipulated under Article 783 (1) of the Corporate Law (Simple Absorption-type Separations). (2) Method Fujitsu will be the transferor company and Toshiba Storage Device will be the successor company (Simple Separation). (3) Decrease in Capital or Other, Resulting from the Corporate Split There will be no decrease in capital or other, resulting from the corporate split.
    [Show full text]
  • PDF Download [1
    Annual Report 2002 TOKYO ELECTRON Profile Established in 1963, Tokyo Electron (TEL) is a world-leading supplier of semiconductor production equipment (SPE) and related services for the semiconductor industry. The Company develops, manufactures and markets a broad lineup of products, including oxidation/diffusion/LP-CVD systems, single wafer CVD and PVD systems, coater/developers, spin-on dielectric (SOD) coaters, etch systems, cleaning systems, wafer probers, and others. Tokyo Electron also uses its accumulated expertise in SPE to develop, manufacture and market coater/developers and etch/ash systems for the manufacture of Flat Panel Display (FPD). Most of the Company’s semiconductor and FPD production systems hold the leading share in their respective markets. Tokyo Electron also maintains a strong presence as a distributor, providing a wide array of semiconductor production systems, storage Disclaimer regarding area network and Internet related products for broadband solutions, and Forward-looking Statements electronic components in Japan from other leading suppliers. With a Matters discussed in this annual report, including network spanning 16 countries on three continents, Tokyo Electron forecasts of future business performance of Tokyo Electron, management strategies, beliefs provides superior products and services to its customers, and superior and other statements are based on the returns to its shareholders. Company’s assumption in light of information that is currently available. These forward-looking statements involve known
    [Show full text]
  • Coolplug Coolinkhub HVAC Bridge Quick Installation Guide
    CoolPlug CooLinkHub HVAC Bridge Quick Installation Guide Warning Read and understand the following Safety Guidelines and Warnings to ensure a safe installation Failure to follow WARNING may result in injury or death. This equipment is to be installed by accredited Install the equipment only in a restricted access electrician or similar technical personnel, as per location. these installation instructions. When wall mounting, be sure to fix firmly on a stable Read the installation instructions before connecting surface and in accordance to the instructions below. the system to the power source. When DIN rail mount fix the devices properly to All electrical work must be performed by a licensed the DIN rail following the instructions below. technician, according to local regulations. When mounting on DIN rail inside a metallic cabinet Ultimate disposal of this product should be handled be sure to properly connected to earth. according to all national laws and regulations. Unplug power when connecting the wires. Installation of the equipment must comply with local Pay attention to the polarity of power and and national electrical legislation for installation of communication cables when connecting them electric equipment. Disconnect power of any bus or communication Do not install the devices outdoors or exposed to cable before connecting the system direct solar radiation, water, high relative humidity or dust. 3 Caution Failure to follow CAUTION may result in serious injury, DO NOT INSTALL COOLINKHUB or COOLPLUG property damage or in some circumstances, even IN THE FOLLOWING LOCATIONS: death. a) Where mineral oil mist or oil spray or vapor is Do not allow children to play with the CoolPlug or produced, for example, in a kitchen.
    [Show full text]
  • Fujitsu/ Panasonic/ Dbj/ Jv
    EN Case No COMP/M.7394 - FUJITSU/ PANASONIC/ DBJ/ JV Only the English text is available and authentic. REGULATION (EC) No 139/2004 MERGER PROCEDURE Article 6(1)(b) NON-OPPOSITION Date: 21/01/2015 In electronic form on the EUR-Lex website under document number 32015M7394 Office for Publications of the European Union L-2985 Luxembourg EUROPEAN COMMISSION Brussels, 21.01.2015 C(2015) 333 final PUBLIC VERSION SIMPLIFIED MERGER PROCEDURE To the notifying parties Dear Madam and Sir, Subject: Case M.7394 – FUJITSU / PANASONIC / DBJ / JV Commission decision pursuant to Article 6(1)(b) of Council Regulation (EC) 1 No 139/2004 and Article 57 of the Agreement on the European Economic Area2 1. On 17 December 2014, the European Commission received notification of a proposed concentration pursuant to Article 4 of the Merger Regulation by which Fujitsu Limited (“Fujitsu”, Japan), Panasonic Corporation (“Panasonic”, Japan) and Development Bank of Japan Inc. (“DBJ”, Japan) acquire within the meaning of Article 3(1)(b) and 3(4) of the Merger Regulation joint control of a newly created joint venture (“NewCo”, Japan), by way of contribution of assets.3 1 OJ L 24, 29.1.2004, p. 1 ("the Merger Regulation"). With effect from 1 December 2009, the Treaty on the Functioning of the European Union ("TFEU") has introduced certain changes, such as the replacement of "Community" by "Union" and "common market" by "internal market". The terminology of the TFEU will be used throughout this decision. 2 OJ L 1, 3.1.1994, p.3 ("the EEA Agreement"). 3 Publication in the Official Journal of the European Union No C 465, 24.12.2014, p.
    [Show full text]
  • What's So Great About Fujitsu and PRIMERGY?
    Fact Sheet What’s so great about Fujitsu and PRIMERGY Fact Sheet What’s so great about Fujitsu and PRIMERGY? What’s so great about Fujitsu and PRIMERGY? realizing high-speed interconnections are Fujitsu America Inc., a wholly owned subsidiary achievements that will set Fujitsu apart of Fujitsu Limited, the third largest IT Company from competitors. in the world, is pleased to present this overview of our PRIMERGY® server. Customers have found PRIMERGY Servers to be a superior investment. With the Fujitsu mainframe Fujitsu has been in the x86 server market since heritage, they are designed to be the solution 1995 as part of a joint venture with Siemens® for enterprise computing environments. through the creation of the Fujitsu-Siemens PRIMERGY Servers will play a significant Computers partnership. The joint venture role in meeting business objectives with: company played a particularly important role as a product development base for x86 servers. ■ Industry-leading Reliability - Fujitsu The decision to fully consolidate Fujitsu PRIMERGY servers integrate Japanese Siemens Computers and unify PRIMERGY server innovation with German engineering. Our development under the successor company, PRIMERGY servers have an average mean Fujitsu Technology Solutions, accelerates time between failures (MTBF) of over 6 product development and enables us to years and a life expectancy of over 10 years. provide globally standardized products. Fujitsu ■ Cool-safe® Technology - Fujitsu PRIMERGY made the investment to buy Siemens half of servers use an average of 20% less power the joint venture as of April 1, 2009. than our competitor’s servers of a similar model. In fact, the PRIMERGY TX120 Drawing on the long Fujitsu heritage and model cuts energy costs in half over experience of designing rock-solid mainframe standard servers.
    [Show full text]
  • Convocation Notice of the 100Th Ordinary General Meeting of Shareholders
    This document has been translated from a part of the Japanese original for reference purposes only. In the event of any discrepancy between this translated document and the Japanese original, the original shall prevail. Fujitsu General Limited assumes no responsibility for this translation or for direct, indirect or any other forms of damages arising from the translations. Securities code: 6755 May 31, 2019 To Our Shareholders: Etsuro Saito President & Representative Director Fujitsu General Limited 3-3-17, Suenaga, Takatsu-ku, Kawasaki, Japan CONVOCATION NOTICE OF THE 100TH ORDINARY GENERAL MEETING OF SHAREHOLDERS You are cordially invited to attend the 100th Ordinary General Meeting of Shareholders (the “Meeting”) of Fujitsu General Limited (the “Company”) to be held as indicated below. If you are unable to attend the Meeting, you may exercise your voting rights either in writing or via the Internet. Please review the attached “Reference Materials for the General Meeting of Shareholders” and exercise your voting rights no later than 5:00 p.m., Thursday, June 20, 2019 (Japan Standard Time), in accordance with the guidance on the following pages. Thank you very much for your cooperation. 1. Date and Time: June 21, 2019(Friday) at 10:00 a.m. 2. Place: 3-3-17, Suenaga, Takatsu-ku, Kawasaki, Japan Hall, sixth floor, research laboratory building, the Company headquarters 3. Meeting Agenda: Matters to be reported: 1. The Business Report and the Consolidated Financial Statements for the 100th Fiscal Year (April 1, 2018 to March 31, 2019), and the results of audits of the Consolidated Financial Statements by the Accounting Auditor and the Audit & Supervisory Board 2.
    [Show full text]
  • Initiatives for AI Ethics: Formulation of Fujitsu Group AI Commitment
    Initiatives for AI Ethics: Formulation of Fujitsu Group AI Commitment Tsuneo Nakata Tatsuki Araki Satoshi Tsuchiya Yuri Nakao Aisha Naseer Junichi Arahori Takahiko Yamamoto While AI technology provides significant benefits, downsides of AI have also been reported, including AI that uses biased data for learning makes unfair decisions. To prevent further ad- vancements in the technology from causing serious side effects, AI ethics are being discussed and many organizations and companies have recently announced new guidelines regarding AI. When Fujitsu released FUJITSU Human Centric AI Zinrai in 2015, we proposed “collabora- tive, human centric AI” and have paid attention to the ethical aspects of AI. In March 2019, we announced the Fujitsu Group AI Commitment that expresses our approach to AI ethics in a concrete and easy-to-understand manner based on the results of over 30 years of R&D and so- cial implementation of AI. The promises of the Fujitsu Group AI Commitment were formulated in cooperation with AI4People, Europe’s expert forum, and are in accordance with the AI eth- ics principles that the forum advocates. They are Fujitsu’s message to its major stakeholders, including customers, people, society, shareholders, and employees. This paper presents the social trends related to AI ethics and describes the basic concept of Fujitsu’s AI Commitment. 1. Introduction the ethical aspects of AI. Furthermore, in March 2019, Progress in AI technologies has led to the develop- we announced the “Fujitsu Group AI Commitment,”1) ment of new methods for prediction and optimization which summarizes Fujitsu’s AI ethics promises based on based on the use of massive amounts of data and has its more than 30 years of experience in R&D and social brought about major benefits to human society.
    [Show full text]
  • Kodak Capture Pro Software Complete Scanner List Sorted By
    Kodak Complete Scanner List November 2020 Capture Pro Software Sorted by Scanner Manufacturer Scanner Model Group Scanner Model Group Agfa ADMIS S 61 G Canon DR-2010C A Canon DR-2050C A Avision AV220C2/D2+ A Canon DR-2080C A Avision AD230 A Canon DR-2510C A Avision AD240 A Canon DR-2580C A Avision AD250 B Canon DR-3010C A Avision AD260 A Canon P-150 A Avision AD280 B Canon P-215 A Avision AV320/AV320+/AV320D2+ B Canon DR-C120/F120 A Avision AV3850SU B Canon DR-C125 A Avision AV8350 D Canon DR-C130 A Canon DR-C225/225W A Bell & Howell 2138 D Canon DR-C230/C240 A Bell & Howell Truper 3200 D Canon DR-M140 A Bell & Howell Truper 3600 D Canon DR-M160/M160II B Bell & Howell 730DC FB C Canon DR-M1060 C Bell & Howell 8080D-B/S-B SCSI E Canon DR-M260 B Bell & Howell 8080DB-I Spectrum E Canon DR-3020/DR-3060 B Bell & Howell 8080SB/SC Spectrum E Canon DR-3080C/380CII B Bell & Howell 8090 Spectrum XF E Canon DR-4010C B Bell & Howell 8100 (SCSI and Spectrum) E Canon DR-4580U C Bell & Howell 8120 Spectrum XF F Canon DR-5010C D Bell & Howell 8125S/8125D SCSI / Video F Canon DR-5020 D Bell & Howell 8125DB-I/DC-I Spectrum F Canon DR-5060F D Bell & Howell 8140 Spectrum XF F Canon DR-5080C D Bell & Howell Ngenuity 9090 E Canon DR-6010C B Bell & Howell Ngenuity 9125 E Canon DR-6030C/6050C D Bell & Howell Ngenuity 9150 F Canon DR-6080C D Bell & Howell SideKick 1200 B Canon DR-7080C/7090C D Bell & Howell SideKick 1400/1400u B Canon DR-7550C DX Canon DR-7580 D Brother ADS-2000 A Canon DR-9050C/9080C E Brother ADS-2100 A Canon DR-X10C (with and w/out VRS) E Brother
    [Show full text]
  • SUMITOMO ELECTRIC Annual Report 2009 the Ever-Evolving Principles
    Annual Report 2009 Year Ended March 31, 2009 TM Each company of the Sumitomo Electric Group combines its unsurpassed creativity with knowledge and experience to generate dynamics that allow the Group to contribute to society. April 2008 Business Activities Launched Full-scale Local Production of Optical Devices and Transceivers in Suzhou, China Sumitomo Electric Photo-Electronics Components (Suzhou), Ltd. started the integrated production of optical device manufacturing and optical transceiver assembly in Suzhou, China. This integrated production system enabled us to reinforce our supply systems to the global market by successfully reducing production lead times and greatly improving production efficiency. July 2008 New Products & Technologies Developed Technique for Analyzing Red Phosphorus Content in Resins Sumitomo Electric has succeeded in developing the June 2008 New Products & Technologies world’s first method never before possible for Completed Prototype of the World’s measuring red phosphorus content in resins. We First Superconducting Electric Car anticipate the method’s applications to wide areas ranging from material development for resin products To verify the suitability of high-temperature superconducting technology to quality control and incoming inspections. used for electric cars, as well as to widely appeal to industrial sectors and society to adopt the technology, we have produced a superconducting electric car on a trial basis. The car runs on a motor incorporating Sumitomo Electric’s high-temperature September 2008
    [Show full text]
  • Vendor Product Name Type OS Version Fujitsu ARROWS Ef FJL21
    Vendor Product Name Type OS version Fujitsu ARROWS ef FJL21 Smartphone Android 4.0.4 Fujitsu ARROWS X F-02E Smartphone Android 4.1.2 Fujitsu ARROWS NX F-06E Smartphone Android 4.2.2 Fujitsu Disney Mobile on docomo F-07E Smartphone Android 4.2.2 Google Google Nexus 4 LG-E960 Smartphone Android 4.2.1 Android 4.1.1 Google Google Nexus 7 Tablet Android 4.2.1 Android 4.2.2 HTC HTC One X S7200 Smartphone Android 4.0.3 HTC HTC J butterfly HTL21 Smartphone Android 4.1.1 HTC HTC J One HTL22 Smartphone Android 4.1.2 iida（HTC） INFOBAR A02 Smartphone Android 4.1.1 KYOCERA DIGNO S KYL21 Smartphone Android 4.0.4 KYOCERA URBANO L01 Smartphone Android 4.2.2 LG Optimus G LGL21 Smartphone Android 4.0.4 LG Optimus G Pro L-04E Smartphone Android 4.1.2 LG Optimus it L-05E Smartphone Android 4.2.2 Motorola Droid RAZR MAXX HD Smartphone Android 4.1.2 NEC MEDIAS X N-06E Smartphone Android 4.2.2 Panasonic ELUGA X P-02E Smartphone Android 4.1.2 Panasonic ELUGA P P-03E Smartphone Android 4.2.2 PANTECH VEGA PTL21 Smartphone Android 4.1.2 SAMSUNG Galaxy S3 GT-I9300 Smartphone Android 4.0.4 SAMSUNG Galaxy Nexus GT-I9250 Smartphone Android 4.0.1 SAMSUNG Galaxy S4 GT-I9505 Smartphone Android 4.2.2 SAMSUNG GALAXY SII WiMAX ISW11SC Smartphone Android 4.0.4 SAMSUNG GALAXY S II LTE SC-03D Smartphone Android 4.0.4 SAMSUNG GALAXY NEXUS SC-04D Smartphone Android 4.1.1 SAMSUNG GALAXY Note SC-05D Smartphone Android 4.0.4 SAMSUNG GALAXY S4 SC-04E Smartphone Android 4.2.2 SHARP ISW16SH Smartphone Android 4.0 (Aquos Phone Series) SHARP AQUOS PHONE SERIE SHL22 Smartphone Android
    [Show full text]
  • Hersteller Modell Sony VGN-FE21S Fujitsu Amilo Pro V2040 Sony VGN
    Hersteller Modell Sony VGN-FE21S Fujitsu Amilo Pro V2040 Sony VGN-CR29XN/B Fujitsu Amilo M1437G Fujitsu Amilo Pro V2045 Asus A8JC-H001H HP/Compaq nw8240 PM-770 HP/Compaq nw8240 PM-760 Asus A8F-H006H HP/Compaq zv6296EA Asus A6JC-Q001H Fujitsu Celsius H720 Acer Spin 1 Samsung QX310 Fujitsu Amilo M3438G Toshiba Satellite L650D Toshiba Satellite M60-135 Asus A6JM-AP007H Lenovo IdeaPad Y700 15" Samsung R540 Samsung RF510 HP/Compaq nx9420-EV2371ET HP/Compaq nx9420 Packard Bell EasyNote TV11 Packard Bell EasyNote TV43 Lenovo IdeaPad G500 Packard Bell EasyNote TV44 Acer TravelMate TimelineX 8372 Asus NB P50IJ Acer Aspire 3003LMi Sony VGN-G21XP/B MSI CR 720 Fujitsu Esprimo Mobile V6545 Twinhead DuraBook efio! R15BL Twinhead DuraBook efio! R15B Samsung M50-1860 Asus UL50 Twinhead DuraBook efio! 15BL Asus Eee PC 1016P Lenovo G 550 MSI CR 610 Asus K53E HP ProBook 4520s Sony VGN-SZ61WN/C Samsung X11-Pro T7400 Brian Samsung M55-Pro T7200 Booker Fujitsu Esprimo Mobile X9515 MSI GT62 Acer TravelMate 6463LMi Acer Aspire 7520G-402G32Mi Samsung Q330 Asus G501 Acer Aspire F15 HP 6530b Acer TravelMate 5520G Acer Aspire R11 Toshiba Satellite P300-1BB Twinhead DuraBook 15D HP Envy X360 15" Twinhead DuraBook efio! 15B Twinhead efio! 12K64 Lenovo B50 Acer TravelMate 7520G Twinhead efio! 12K Acer TravelMate 6594 Acer Extensa 5210-300508 Lenovo ThinkPad T450s HP ProBook 430 G4 HP ProBook 450 G4 HP ProBook 440 G4 HP ProBook 470 G4 HP Pavilion 14 Sony VGN-FS415E Asus X52 HP EliteBook 8730w Sony VGN-FS415M Acer Aspire Timeline 4810T Fujitsu Esprimo Mobile V6515 Acer
    [Show full text]