Attend to Construction Subcontractors on Site

13052 version 3 Page 1 of 3 Attend to construction subcontractors on site

Level 3

Credits 4

Purpose People credited with this unit standard are able to attend to construction subcontractors on site, and complete work operations on site.

Subfield Construction Trades

Domain Carpentry

Status Registered

Status date 25 January 2008

Date version published 25 January 2008

Planned review date 31 December 2012

Entry information Open.

Replacement information This unit standard and unit standard 13015 replaced unit standard 616.

Accreditation Evaluation of documentation and visit by NZQA and industry.

Standard setting body (SSB) Building and Construction Industry Training Organisation

Accreditation and Moderation Action Plan (AMAP) reference 0048 This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.

Special notes

1 Definitions Plant is used as in the Health and Safety in Employment Act 1992 to mean appliances, equipment, fittings, furniture, implements, machines, machinery, tools, vehicles, plus parts, controls, and anything connected. Site documents refer to any official documentation for the site, and may include consents, working drawings, plans and specifications, reports, producer statements, any relevant industry standards, or any other documentation critical to the construction process. Work site practice refers to the documented procedures specific to a work site which set out the standard and required practices of that work site.

2 For all on site unit standards the practical assessment evidence must be provided in the context of commercial business construction operations, in the workplace, under normal workplace conditions.

3 Credit for this unit standard indicates compliance with industry practice. Industry practice refers to the ability to demonstrate knowledge and skills that reflect the productivity, uniformity, finish quality and material economies currently accepted within industry.

4 Legislation relevant to this unit standard includes: Health and Safety in Employment Act 1992 and Health and Safety in Employment Regulations 1995; Building Act 2004; Resource Management Act 1991; New Zealand Building Code.

Elements and performance criteria

Element 1

Attend to subcontractors on site.

Range eight of – excavator, brick and block layer, reinforcing steel fixer, roofer, structural steel fabricator, mechanical services contractor, plumber, drain layer, joiner, glazier, window installer, electrician, interior plasterer, interior decorator, painter, solid plasterer, specialist coatings applicator, tiler, scaffolder, concrete placer, floor sander, insulation installer, metal worker, floor covering contractor, suspended ceilings contractor, proprietary partitions contractor, lift installer, fire protection contractor, data technician, concrete cutter.

Performance criteria

1.1 Extent of work of subcontractors is identified as detailed in site documents.

1.2 Framing and cutting is completed to the requirements of the subcontractor and site documents.

1.3 Building is ‘made good’ after work of the subcontractor is completed.

1.4 Temporary protection for work already completed is provided in accordance with site documents.

Element 2

Complete work operations on site.

Performance criteria

2.1 All operations are safely completed; workplace, tools, plant and equipment are cleaned; and tools, plant and equipment are stored in accordance with work site practice.

Please note

Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards.

Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Building and Construction Industry Training Organisation [email protected] if you wish to suggest changes to the content of this unit standard.