North American Specifications German Engineering

1

BROCHURE ABRIDGED OEattachments.com | 833-OEA-KAUP 632-5287 OEAK-BROC-2021-04-29 ABOUT US

OE Attachments is proud to offer a new product line of attachments through its exclusive North American partnership with German manufacturer Kaup. Producing over 40,000 attachments every year, Kaup is one of Europe’s leading manufacturers in forklift attachments such as sideshifters, fork positioners, rotators, and more. All OEA Kaup attachments are modular and designed to work together.

TABLE OF CONTENTS

Fork Clamps 4 3 Rotators 6 Multi- Handlers 8 Appliance & Clamps 10 Telescopic Forks 12 Rotating Roll Clamps 14 Push Pulls 16 Sideshifters 18 Fork Positioners 20 Fork Variety 22 Load Backrest 24

OEAK-BROC-2021-04-29 OEattachments.com | 833-OEA-KAUP 632-5287 FORK CLAMPS OEA Kaup Fork Clamps High-Visibility Fork Clamps can be used for transporting palletized goods as well as for clamping. OEA Kaup’s optimized design ensures superior visibility for the driver and allows quick and precise operation of the clamp. The compact dimensions provide stability, and the robust sliding profile decreases wear and tear. Customization of the opening ranges, frame widths, fork types, and sizes adds new levels of versatility.

HIGH VISIBILITY OEA Kaup Clamps set high standards with regards to visibility. The optimized design ensures excellent visibility for the driver and allows quick and precise operation of the clamp guaranteeing high working performance and reducing the risk of accidents significantly.

HANDLING WITH OEA KAUP CLAMPS OEA Kaup Clamps can be supplied with sideshift function which simplifies operation for the truck driver. The independent sideshifter system comes standard and permits sideshifting without restriction and allows utilization of the entire opening range for shifting loads laterally. All sideshift housings feature SOFTSTOP end-of-stroke slow-down. If required, the OEA Kaup Clamp can be fitted with a valve block sideshift system which uses the residual stroke of the clamp cylinders to achieve lateral arm movement.

Fork Clamp

Capacity Capacity LCD S A B D E G ITA V Z (CofG) Y (CofG) Weight Product # Fork lb Clamp lb in in in in in in in class in Hor. in Vert. in lb MINIMUM 3,300 lb ------1.6" 29.5" ------II ------FC-036-382-2-A 5,137 lb 3,671 lb 24" VBSS 16.5-65.7" 38.2" 2" 4.7" 48" II 7.7" 2.9" 9.9" 483 lb FC-050-409-2-A 6,614 lb 5,004 lb 24" VBSS 17.7-70.9" 40.9" 2" 5.9" 48" III 8.4" 3.3" 10.2" 668 lb FC-070-472-3-A 11,023 lb 7,055 lb 24" VBSS 18.1-76.4" 47.2" 2.8" 5.9" 48" III 6.4" 3.5" 12.7" 1,019 lb FC-070-472-4-A 11,023 lb 7,055 lb 24" VBSS 18.1-76.4" 47.2" 2.8" 5.9" 48" III 9.8" 3.5" 12.7" 1,019 lb MAXIMUM 17,000 lb ------93.5" 86.6" ------IV ------*All dimensional sizes are nominal *VBSS Valve Block Side Shift Fork Options

Product # Fork Size Fork Size Fork Size Fork Size FC-036-382-2-A 2-5-36 2-5-42 2-5-48 - - FC-050-409-2-A 2-5-36 2-5-42 2-5-48 - - FC-070-472-3-A 2-6-42 2-6-48 2-6-54 2-6-60 FC-070-472-4-A ------

OEAK-BROC-2021-04-29 FORK CLAMPS

CLAMP PROFILE OEA Kaup Clamps are characterized by favorable weight and compact dimensions which provides high stability. An extremely robust sliding profile has been designed to improve gliding and to reduce wear and tear between profiles.

TOP SPEED SERVICE OEA Kaup Clamps are synonymous with trouble-free operation. Servicing is simple and can be executed without special skills or training. In conjunction with the OEA Kaup modular-built system, we have a large stock of replacement parts at reasonable prices.

5

Rotating Fork Clamps

D E G H I K Ft lb @ Gpm Per ITA V Z (CofG) Y (CofG) Weight Product # Capacity Capacity LCD A B 1812psi RPM Forks Clamp in in in in in in in in in Torque GPM class in Hor. in Vert. in lb MINIMUM 2,750 lb - - - - 0.8” 38.2" ------RFC2-036-382-2-A 4,784 lb 3,671 lb 24" 16.9-66.1" 38.2" 2.0" 4.7" 48" 10.6" 18" 1.3" 2,840 1.3 II 12.8" 5.9" 10.7" 364 lb RFC2-052-409-3-A 6,614 lb 5,291 lb 24" 17.7-70.9" 40.9" 2.0" 5.9" 48" 13.3" 15.6" 1.6" 6,601 3 III 14.4" 6.4" 13.4" 1,345 lb RFC2-065-472-3-A 8,267 lb 6,504 lb 24" 18.1-76.4" 47.2" 2.4" 5.9" 48" 13.3" 15.6" 1.6" 6,601 3 III 14.8" 6.7" 12.5" 1,605 lb MAXIMUM 13,200 lb - - - - 96.5” 71.1" ------*All dimensional sizes are nominal Fork Options Product # Fork Size Fork Size Fork Size Fork Size RCB2-047-382-2-X 2-5-42 2-5-48 - - - - RCB2-066-409-3-X 2-6-42 2-6-48 2-6-60 - - RCB2-082-472-3-X 250-6-42 250-6-48 250-6-54 250-6-60

LOAD BACKREST available see page 24

OEattachments.com | 833-OEA-KAUP 632-5287 ROTATORS OEA Kaup Rotators Loads carried by forklifts often need to be rotated, either to empty a , slide material off a pallet, or set a horizontal load upright. Rotators can be equipped with forks as well as with clamps, booms, or other load-handling attachments. Our Rotators come standard with ITA rail mounting. OEA Kaup Rotators prioritize speed over torque, however, this can be changed should the application/specification require it.

Features & Benefits » Robust construction that allows for easy maintenance » Industry-leading residual capacity » Able to use original forks via two mounting clips » Square concentric fork retainers that allow for varying fork widths » Multiple fork retaining locations for ideal positioning of forks » OEA Kaup standard models protect hydraulic motors by positioning behind the body » Capacities range up to 55 tons on special order rotators » Fishing and Foundry versions available » Lateral and vertical support arms available for bin application » Unique faceplate design with integrated carriage » Many application possibilities

Rotators Ft lb @ Gpm Per Product # Capacity LCD A B H I K 1812psi RPM ITA V Z (CofG) Y (CofG) Weight lb in in in in in in Torque GPM class in Hor. in Vert. in lb MINIMUM 2,640 lb - - - - 30.7" ------II ------RO2-033-386-2-A 3,307 lb 24" 30.7" 38.6" 8.1" 11.3" 1.2" 2,218 1.0 II 7.5" 4.4" 8.1" 408 lb RO2-033-409-2-A 3,307 lb 24" 30.7" 40.9" 8.1" 11.3" 1.2" 2,218 1.0 II 7.5" 4.2" 8" 414 lb RO2-045-370-2-A 4,592 lb 24" 39.4" 37" 10.6" 13.6" 1.1" 2,840 1.3 II 7.9" 4.4" 10" 556 lb RO2-045-409-2-A 4,592 lb 24" 39.4" 40.9" 10.6" 13.6" 1.1" 2,840 1.3 II 7.9" 4.4" 10" 562 lb RO2-058-421-3-A 5,878 lb 24" 39.4" 42.1" 10.6" 13.6" 1.3" 2,840 1.3 III 8.1" 4.8" 10.5" 664 lb RO2-091-480-3-A 9,193 lb 24" 39.8" 48" 13.3" 15.6" 1.6" 6,601 3.0 III 8.2" 4.4" 12.1" 924 lb MAXIMUM 17,600 lb - - - - 63" ------*All dimensional sizes are nominal Fork Options Product # Fork Size Fork Size Fork Size Fork Size Fork Size RO2-033-386-2-A 150-4-36C01902 150-4-42C01902 150-4-48C01902 - - - - RO2-033-409-2-A 150-4-36C01902 150-4-42C01902 150-4-48C01902 - - - - RO2-045-370-2-A 150-5-36C01902 150-5-42C01902 150-5-48C01902 - - - - RO2-045-409-2-A 150-5-36C01902 150-5-42C01902 150-5-48C01902 - - - - RO2-058-421-3-A 175-5-36C01901 175-5-42C01901 175-5-48C01901 175-5-54C01901 - - RO2-091-480-3-A 2-5-42C01901 2-5-48C01901 2-5-54C01901 2-5-60C01901 2-6-48C01901

OEAK-BROC-2021-04-29 Rotator Model ROTATORS

» Optimal lost load center ensures industry-leading residual capacities. » Optimal visibility. The hydraulic drive is located on the side away from the operator resulting in relatively flat design which does not obstruct visibility.

» Standard forks (commercially available) can be used. Eccentrically drilled stop blocks, which are part of the delivery, ensure safe fork adjustment. Two-clip design allows for standard forks to be used.

» Rotators available with QUICK-RELEASE HOOKS for assembly or disassembly without tools.

» Distances between forks, within the fork carriage width, can be chosen as required as the lower fork plate has relevant holes the entire length. Eccentrically drilled stop blocks ensure that any width of fork can be secured firmly.

» Different rotating speeds and torques withconstant oil volume and constant pressure are possible with the same hydraulic motors with different capacities.

» OEA Kaup Rotators are driven by hydraulic motors and worm gear running through oil. 3 sizes of worm gear and 4 sizes of worm gear allow 9 different sizes of torque. 7 » OEA Kaup Rotators require little service. They are manufactured from only a few parts. Straight-toothed slewing rings are standardly used for the bearings. The slewed rings are, depending on the capacity, toothed on the inner or outer side.

» OEA Kaup Rotators are the basis for all rotating combinations for different customer requirements (rotating Bale Clamps, Clamps, Pallet Turnover\Clamps, Roll Clamps, rotating Fork Clamps and rotating Fork Positioners).

» Continuous 360° rotation. Can be limited to 180° upon request.

» OEA Kaup standard Rotators are available with capacities of up to 25 tons; special order Rotators are available with capacities of up to 55 tons.

» Optional forks are used for 360° operations for loadbearing applications. Standard forks can be used for greater than 90 non-loadbearing applications.

WIDE RANGE of SIZES and CUSTOM OPTIONS are available.

OEattachments.com | 833-OEA-KAUP 632-5287 MULTI-PALLET HANDLER

OEA Kaup Multi-Pallet Handlers Multi-Pallet Handlers are an ideal solution for moving multiple loads at the same time, thus, increasing forklift efficiency. The innovative multi-pallet handler design combines stability with optimal visibility. Options range from single-double models up to heavy-duty four-eight models that can transport as many as eight at once.

Features & Benefits » Industry-leading lost load center (additional lost load models available) » SMOOTHROLL and SOFTSTOP features minimize wear and tear » Multi-pallet transportation with maximum cost-effectiveness » Service and maintenance-friendly design » Synchronization for high operation speeds

Multi-Pallet Handler

Capacity LCD S A B D E H L ITA V Z (CofG) Y (CofG) Weight Product # lb lb in in in in in in in class in Hor. in Vert. in lb MINIMUM 3,520 lb - - - - 22" ------II ------MP-048-409-2-A 4,850 lb 24" +/- 3.9" 28.3-83.5" 40.9" 1.6" 3.1" 55.1" 42.1" II 8" 9.4" 9.3" 1,089 lb MP-055-409-2-A 5,500 lb 24" +/- 3.9" 28.3-83.5" 40.9" 1.8" 3.1" 55.1" 42.1" II 8" 11" 11" 1,179 lb MP-055-409-3-A 5,500 lb 24" +/- 3.9" 28.3-83.5" 40.9" 1.8" 3.1" 55.1" 42.1" III 8" 11" 11" 1,179 lb MP-070-409-3-A 7,055 lb 24" +/- 3.9" 28.3-83.5" 40.9" 2" 3.1" 55.5" 42.1" III 10.7" 11.8" 9.5" 1,213 lb MAXIMUM 13,200 lb - - - - 77.2" ------IV ------*All dimensional sizes are nominal

Fork Options

Fork Size Options 1.6-3-42 1.8-3-42 2-3-42

TRIPLE AND QUAD PALLET HANDLERS also available

OEAK-BROC-2021-04-29 Maximum Productivity MULTI-PALLET HANDLER The reliability and longevity of Double-Pallet Handlers ensures maximum effectiveness and profitability in the transportation of palletized goods. Optimal visibility as well as exact synchronization enable high working speeds. The optimal design guarantees a high degree of stability. The highly wear-resistant sliding profiles ensure maintenance expenditures are kept to a minimum with long intervals between service checks. OEA Kaup’s wear-resistant materials helps cut down on operational costs.

OPTIMIZED VISIBILITY CONDITIONS The high-visibility design ensures a clear view of the fork tips and guarantees safe and precise operation.

PROVEN STABILITY OEA Kaup’s design guarantees a high degree of stability and an extended operating time, even under tough conditions.

CUSTOMIZABLE Double-Pallet Handlers can be individually fitted or retrofitted for any specifications. That includes but is not limited to quick-release bottom hooks, load stabilizer, special load backrests, individual capacities, opening ranges, and fork lengths.

SEPARATE SIDESHIFT All Double-Pallet Handlers come standard with a separate sideshift (SMOOTHROLL). 9 BOLT-ON FORKS SLIDING PROFILES Interchangeable forks reduce Highly wear-resistant sliding profiles can be spare part stocks as well as replaced quickly and simply on-site without maintenance costs and the use of special tools and without guarantees maximum operation. dismounting the attachment from the truck. INDIVIDUAL FITTING The distance between the inner forks can be adjusted on nearly all Double-Pallet Handlers in order to pick up special pallets. Hydraulic movement of fork pairs, independent of each other, is available as an option so that the opening range can be adjusted to fit different types of pallets. Individual construction available upon request.

LOAD STABILIZERS In handling applications where the load must be secured during transportation, Double-Pallet Handlers can be fitted with Load Stabilizers or Telescopic Load Stabilizers. The Load Stabilizer specifications such as opening range, dimensions, and of contact pads can be changed depending on the application.

FORKS AND LOAD BACKRESTS Fork length and cross section as well as height and design of load backrests can be individually optimized and fitted for every application. Double-Pallet Handlers can be equipped with Telescopic Forks to handle different lengths of pallets.

LOAD END STOP Double-Pallet Handlers can be fitted with a mechanical or hydraulic hinged load end stop to safely transport different sizes of pallets.

OEattachments.com | 833-OEA-KAUP 632-5287 APPLIANCE & CARTON CLAMPS

OEA Kaup CARTON / APPLIANCE CLAMPS OEA Kaup’s Appliance and Carton Clamps are used worldwide to transport heavy appliances and consumer electronics. By having separate pads align on each clamp arm, a user can rotate pads to extend pad life and ultimately the life of the clamp. Additional pad materials are available to meet individual needs.

Carton/Appliance Clamp » Separate independent side shift function allows full stroke regardless of arm position » Unique 4-piece pad design; each pad can be rotated for wear. » Cylinder and piston rod protection available for HD applications

Carton Clamp

Z Y Product # Capacity LCD S A B E F G ITA V (CofG) (CofG) Weight lb in in in in in in in class in Hor. in Vert. in lb MINIMUM 3,300 lb - - - - 13" ------II ------CCB1-025-4848-2-A 2,507 lb 24" VBSS 22-77.2" 42.5" 2.2" 47.2" 47.2" II 5.1" 17.4" 13.1" 1,437 lb CCB1-036-4848-2-A 3,682 lb 24" VBSS 22-76" 42.5" 2.4" 47.2" 47.2" II 5.6" 18.1" 18.8" 1,521 lb CCB1-036-4848-3-A 3,682 lb 24" VBSS 22-76" 43" 2" 47" 47" III 6" 18" 19" 1,521 lb MAXIMUM 17,000 lb - - - - 94" ------III ------*All dimensional sizes are nominal *VBSS Valve Block Side Shift

OEAK-BROC-2021-04-29 APPLIANCE & CARTON CLAMPS

DUAL SWIVELING ARMS » Automatic compensation of toe-in » Equal distribution of clamping pressure » Parallel contact pads

VULCANIZED PADS 11 » Highly resiliant contact pads » Four-piece pad comes standard

BOLTED-ON STEEL RUBBER PLATE » Low wear and tear and easy to replace » Available for different arm sizes

GRIPPING NAP STRAP COATING » The yellow coating leaves no marks on the load and distinguishes itself through excellent friction which prevents sliding. The black coating is also highly resistant to wear, therefore, expanding the overall life of the product.

DIAMOND PLATE PADS » The pads are an alternative when special shapes and sizes are to be manufactured individually. Suitable for a multitude of applications.

LOAD BACKREST available see page 24

OEattachments.com | 833-OEA-KAUP 632-5287 TELESCOPIC FORKS

OEA Kaup Telescopic Forks Telescopic Forks enable the stacking of palletized goods to the opposite side of trucks, deep into trucks or in double-deep racks. Telescopic Forks increase loading speeds, ensuring quicker loading cycles.

Features & Benefits » Service and maintenace-friendly » Easy access to the hydraulic connections on the fork shank for simple assembly and disassembly of the telescopic forks

» New design » Accessory options

• Sliding parts with extended wear surface • Load stop Hardox Bar

• Robust outer forks with Hardox bar on • Optional hydraulic guard the complete length of the bottom of the forks • Replaceable wear bar • Strengthened outer forks connections

Telescopic Forks Y Capacity Capacity Capacity E D G1 G2 ITA V Z Z1 (CofG) Weight Product # Lbs @ Lbs @ Lbs @ Wide Thick Length Length Class Thick (CofG) (CofG) Vert. lb 24" 54" 69" in in in in in in in in MINIMUM 4,400 lb 2,090 lb 1,760 lb - - - - 31.5" 47.2" II ------TFCT-055-4781-2-A 5,512 lb 2,646 lb N/A 6.4" 2.2" 47.2" 80.7" II 1.8" 16.5" 22.8" 2.2" 428 lb TFCT1-055-5393-2-A 5,512 lb 2,646 lb 2205 lb 6.4" 2.2" 53.1" 92.5" II 1.8" 19.2" 27.9" 2" 463 lb TFCT-077-4781-3-A 7,716 lb 3,527 lb N/A 6.4" 2.2" 47.2" 80.7" III 1.8" 15.8" 23.1" 3.3" 465 lb TFCT1-077-5393-3-A 7,716 lb 3,527 lb 2976 lb 6.4" 2.2" 53.1" 92.5" III 1.8" 18.4" 27.3" 3" 503 lb MAXIMUM 11,000 lb 5,060 lb 4,180 lb - - - - 53.1" 92.5" III ------*All dimensional sizes are nominal

OEAK-BROC-2021-04-29 TELESCOPIC FORKS

Visibility, lost load center & residual capacity

» 100% synchronization of left and right forks – no misalignment

» Low lost load center – excellent residual capacity

» Excellent visibility compared to standard forks

» Two cylinders per fork from 5,500 lb capacity upwards (up to 4,400 lb: one cylinder per fork) PALLET STOP A1

LOAD BACKREST A3 LOAD STOP A2

13

100% HYDRAULIC SYNCHRONIZATION

LOAD BACKREST available see page 24

OEattachments.com | 833-OEA-KAUP 632-5287 ROTATING ROLL CLAMPS OEA Kaup Rotating Roll Clamp The OEA Kaup Rotating Roll Clamp is an essential solution for handling spools of paper, large pipes, tires, and other cylinder shaped loads. The clamp has been optimized to handle complex applications all while ensuring operator safety and maximizing productivity. OEA Kaup Rotating Roll Clamps prioritize speed over torque, however, this can be changed should the application/specification require it.

Features & Benefits

» Even force distribution via the optimized clamping arm kinematics » Improved clamp arm design that makes handling loads simple and easy » Newly-designed contact pads to secure loads and prevent shifting » Innovative hydraulic components » Continuous rotation

Modular rotary conduit for simple modificationof the clamp by retrofitting additional hydraulic functions. Short arm adjustable by sequencevalve control or in all 45° positions.

Optimized hydraulic hose installation for quick arm adjustment and leakage prevention.

Reinforced arm on connection to clamp body

ROTATING ROLL CLAMP

H K L N Ft lbs @ Gpm ITA V Z Y (CofG) Weight Product # Capacity LCD A1-A2 F G 1812psi Per (CofG) lb in in in in in in in in Torque RPM Class in Hor. in Vert.in lb MINIMUM 2,750 lb - - - - 0.8” 38.2" ------II ------RCBC-026-1853-2-A 2,646 lb 27" 17.7-53.1" 11.8" 27.6" 8.2" 9.8" 1.3" 3.9" 2,218 1.0 II 7.4" 11.3" 11.8" 888 lb RCB-052-0853-3-A 5,291 ib 27" 7.9-53.1" 13.4" 33.5" 10.6" 9.8" 1.3" 6.7" 2,840 1.0 III 8.1" 11.8" 15.0" 1,173 lb RCB-061-1063-3-A 6,173 ib 31" 9.8-63" 13.4" 33.5" 13.3" 9.8" 1.4" 6.7" 6,601 3.0 III 9.5" 11.5" 16.5" 1,656 lb MAXIMUM 13,200 lb - - - - 96.5” 71.1" ------IV ------*All dimensional sizes are nominal

OEAK-BROC-2021-04-29 ROTATING ROLL CLAMPS

Visibility lost load center, residual capacity » Excellent visibility with optimally-designed OEA Kaup’s clamping arms, fixed hose installation Rotating Roll (where feasible) and with split contact pads » Ideal lost load center and result in Clamps can optimal residual capacity be used with Other features: the following: » Separate sideshift function Reach trucks » Optional 180° rotation Telescopic loaders » Quick-release bottom hooks » Fully configurable Wheel loaders » Pressure relief valve (manual, double, Automated guided vehicles triple, and quadruple) » Visual and audio sensors Stationary material handling » Various opening ranges equipment » Wide selection of contact pad surfaces » Service and maintenance-friendly

• Use of identical parts enables component storage and reduces costs • Immediate spare parts supply available 15 • Wear plates located on the contact pads, arms, and bolted wear bars and supporting feet protect from damage

CONTACT PAD OPTIONS

Cast contact pads Diamond plate pads Polyurethane coating Metal spray surface (standard)

SIC surface Quarz sand coating Rubber lining Secutex lining

OEattachments.com | 833-OEA-KAUP 632-5287 PUSH-PULLS

OEA Kaup Push-Pulls Push-Pulls replace traditional pallets with inexpensive slipsheets (usually made of plastic or cardboard) when shipping and receiving warehouse loads. This makes, for example, economical loading of overseas feasible. Push-Pulls are typically used for bagged products like seed, agricultural products, cosmetics, and cased food.

OEA Kaup’s Push-Pull is versatile in that it can be used with or without a pallet saver, with a separate sideshifter, or with a hydraulically-adjustable carrying platen. The range includes a slip-on version which can easily be fitted on forks of all sizes.

OEA Kaup’s range of Push-Pulls are designed with a scissor system so that the pushing mechanism is self-supporting. Another advantage is the hydraulic system; all hydraulic cylinders have been optimized to the required application guaranteeing safe handling of the load. Finally, the use of plastic sliding bushes makes the bearings of the scissor system maintenance-free.

OEA Kaup state-of-the-art Push-Pulls are available in different versions » with or without pallet saver » with separate sideshifter

Push-Pulls

Capacity LCD B C D E F ITA V Z (CofG) Y (CofG) Weight Product # lb in in in in in in class in Hor. in Vert. in Lbs Mounting MINIMUM 2,200 lb ------PPFM-037-1548-2-A 3,748 lb 24" 39.4" 50" 40.7" 0.4" 48" N/A 8.5" 10.1" 14.1" 990 lb Fork PPCM-037-1548-2-A 3,748 lb 24" 39.4" 50" 40.7" 1" 48" II 10.2" 13" 10.9" 1,226 lb Carriage MAXIMUM 5,280 lb ------*All dimensional sizes are nominal

OEAK-BROC-2021-04-29 Step 1 PUSH PULL OPERATION Approach the load until the flap fits into the gripper channel and grip the slip-sheet.

Slip-sheet Gripper-Bar

Gripper Channel Step 2 Pull the slip-sheet and load onto the platen and release the flap.

Slip-Sheet Sheet Saver Bar 17 Gripper-Bar

Gripper Channel Step 3 Step 4 Slip-sheet saver bar is raised Slip-sheet saver bar is lowered and presses down the slip-sheet

Step 5 Load is pushed off whilst the slip-sheet remains on the platen

Slip-sheet

Capacity LCD B C D E F ITA V Z (CofG) Y (CofG) Weight Product # lb in in in in in in class in Hor. in Vert. in Lbs Mounting Slip-sheet saver bar MINIMUM 2,200 lb ------PPFM-037-1548-2-A 3,748 lb 24" 39.4" 50" 40.7" 0.4" 48" N/A 8.5" 10.1" 14.1" 990 lb Fork PPCM-037-1548-2-A 3,748 lb 24" 39.4" 50" 40.7" 1" 48" II 10.2" 13" 10.9" 1,226 lb Carriage MAXIMUM 5,280 lb ------LOAD BACKREST available see page 24

OEattachments.com | 833-OEA-KAUP 632-5287 SIDESHIFTERS OEA Kaup Sideshifters: The OEA Kaup Sideshifter allows for lateral shifting of the load. This enables drivers to position goods horizontally with precision and increases the overall efficiency of the forklift. Standard and a high-performance models are currently available.

Standard Model Taking the truck capacity into account, the Sideshifter enables operators to laterally shift loads, standard side-shifting movement is ±3.94”. » Maximum residual capacity due to minimum weight and lost load center » Maximum visibility » Equal shifting force and speed in both directions » Extremely quick and simple installation » Adjustable space between Sideshifter and fork carriage » Minimum service required; replacement parts can be exchanged quickly and easily

Sideshifter Standard Model SSP5

Capacity LCD B A C D S ITA V CofG CofG Weight Product # lb in in in in in in Class in (Z) in (Y) in in MINIMUM 5,500 lb - - 35" ------II ------SSP5-055-370-2-A 5,512 lb 24" 37" 23.2" 1.3" 1.1" +/- 3.9" II 2.2" 0.9" 8.5" 137 lb SSP5-055-409-2-A 5,512 lb 24" 40.9" 23.2" 1.3" 1.1" +/- 3.9" II 2.2" 0.9" 8.5" 146 lb SSP5-066-370-3-A 6,614 lb 24" 37" 23.6" 1.7" 1.5" +/- 3.9" III 2.5" 0.9" 11.4" 159 lb SSP5-066-409-3-A 6,614 lb 24" 40.9" 23.6" 1.7" 1.5" +/- 3.9" III 2.5" 0.9" 11.3" 172 lb SSP5-066-451-3-A 6,614 lb 24" 45.1" 23.6" 1.7" 1.5" +/- 3.9" III 2.5" 0.9" 11.3" 181 lb SSP5-101-490-3-A 10,141 lb 24" 49" 23.6" 2.1" 1.6" +/- 3.9" III 3.2" 1.4" 10.5" 269 lb MAXIMUM 11,000 lb - - 55.1" ------III ------*All dimensional sizes are nominal

OEAK-BROC-2021-04-29 High-Performance Model SIDESHIFTERS Many requirements and different widths of fork carriages require an unlimited number of variations. The OEA Kaup High-Performance Sideshifter Model SSP2 supplies this variation. In addition, all sideshifter components such as housings, pistons, and brackets are identical in design to those used in other OEA Kaup attachments with additional sideshifting function. This keeps maintenance easy and simplifies any needed repairs.

Features & Benefits » High visibility » Designed for extremely tough operations » Equal shifting force and speed in both directions » Piston rods are protected » Quick and easy installation » Fork length unrestricted within maximum capacity of the forklift truck » SOFTSTOP end-of-stroke slow-down » Construction widths available up to 138” » SMOOTHROLL bottom brackets

19

Sideshifter High-Performance Model SSP2

Capacity LCD A B C D S G J ITA V Z (CofG) Y (CofG) Weight Product # lb in in in in in in in in class in Hor. in Vert. in lb MINIMUM 5,500 lb - - - - 35" ------II ------SSP2-110-610-3-A 11,023 lb 24" 4.1" 61" 1.7" 1.7" +/- 3.9" 6.5" 36.3" III 3.6" 2" 11.8" 531 lb SSP2-110-720-3-A 11,023 lb 24" 4.1" 72" 1.7" 1.7" +/- 3.9" 6.5" 36.3" III 3.6" 2.1" 11.8" 569 lb SSP2-176-858-4-A 17,637 lb 24" 4.4" 85.8" 2.4" 2.1" +/- 6.3" 8.3" 54.8" IV 4" 2.2" 14.2" 983 lb MAXIMUM 17,600 lb - - - - 137.8" ------IV ------*All dimensional sizes are nominal

EASYSLIDE 5,500 LB Grease-able, highly wear-resistant sliding pads move with ease.

EASYGLIDE 6,500 LB Sideshifter mounting with adjustable lower hooks accommodates carriage clearance. Grease-able, highly wear-resistant sliding pads move with ease.

SMOOTHROLL 10,000 LB Bottom brackets are fitted with glide bearing supporting rollers. Minimal friction loss lowers energy consumption, especially in electric forklift trucks, and extends operating time of the batteries.

LOAD BACKREST available see page 24

OEattachments.com | 833-OEA-KAUP 632-5287 FORK POSITIONERS OEA Kaup Fork Positioners Fork Positioners can easily handle loads with varying widths to help meet complex material handling demands. These attachments enhance forklift versatility by allowing operators to control fork distance and handling capacity from the driver’s seat. Fork Positioners also significantly reduce the risk of accidents by providing the correct support base for the load.

Standard Model The demands on material handling tasks are increasingly more complex. OEA Kaup Fork Positioners accommodate these requirements, as they increase the flexibility and profitability with more handling capacity of every forklift truck, especially when the width of the load changes constantly. For this reason, Fork Positioners are the most frequent attachment found on forklift trucks after Sideshifters. OEA Kaup offers a large variety of Fork Positioners suitable for every transportation and operational task.

OEA Kaup Fork Positioners are also (in some cases) available as an integrated version with even better residual capacity.

Features & Benefits: » QUICKSEAL-sideshift cylinder design for quick and easy exchange of seal kits without the need for tools » Hydraulic-synchronization of fork adjustment » Drillings in carriers for accommodating different fork widths » Greasable, highly wear-resistant EASYSLIDE sliding pads that move with ease

Fork Positioner Standard Model SSFPB

Capacity LCD S A B D PA Fork ITA V Z (CofG) Y (CofG) Weight Product # lb in in in in in in width in class in Hor. in Vert. in lb MINIMUM 5,500 lb - - 35" 11.4" ------II ------SSFPB-055-370-2-A 5,512 lb 24" +/- 3.9" 12.8--32.9" 37.0" 1.1" 23.2" 2.8-4.9" II 2.2" 0.9" 8.5" 137 lb SSFPB-055-409-2-A 5,512 lb 24" +/- 3.9" 12.2--37.2" 40.9" 1.1" 23.2" 2.8-4.9" II 2.2" 0.9" 8.5" 198 lb SSFPB-066-409-3-A 6,614 lb 24" +/- 3.9" 15--37.2" 40.9" 1.5" 23.6" 3.9--5.9" III 2.5" 1.1" 10.7" 258 lb SSFPB-066-490-3-A 6,614 lb 24" +/- 3.9" 13.8-45.3" 49.0" 1.5" 23.6" 3.9--5.9" III 2.5" 1.1" 10.7" 265 lb SSFPB-101-490-3-A 10,120 lb 24" +/- 3.9" 13.8-45.3" 49.0" 1.6" 23.6" 3.9--5.9" III 3.2" 1.9" 13.4" 399 lb SSFPB-101-551-3-A 10,120 lb 24" +/- 3.9" 14-49.4" 55.1" 1.6" 23.6" 3.9--5.9" III 3.2" 1.9" 13.4" 405 lb *AllMAXIMUM dimensional sizes are11,000 nominal lb - - 53" 49.5" ------III ------

OEAK-BROC-2021-04-29 FORK POSITIONER Heavy Duty Model This Fork Positioner has an independent sideshift and is completely symmetrical in fork adjustment. The original forklift forks can be used. The construction width, and therefore, the opening range of the attachment is not dependent on the width of the fork carriage of the forklift truck. This product is also available without sideshift function.

» Sideshift function end-of-stroke slow-down SOFTSTOP and roller guided lateral displacement SMOOTHROLL

» Asymmetrically drilled stop blocks for locking of forks with varying widths

» Construction width and adjusting range are not dependent on the width of the basic fork carriage. Optional widths greater than 118 possible upon request

» Original forks can be used ( 63” long - up to 95” possible with wider fork brackets)

21

Fork Positioner Heavy Duty Model SSFPSN2

Capacity LCD S A D Fork ITA V Z (CofG) Y (CofG) Weight Product # lb in in in in width in class in Hor. in Vert. in lb MINIMUM 5,500 lb - - - - 13.8" 32.6" - - III ------SSFPSN2-110-630-3-A 11,023 lb 24" +/- 3.9" 15.4-61.8" 63" 3.5--6.3" III 4.4" 2.7" 12.9" 814 lb SSFPSN2-176-630-4-A 17,637 lb 24" +/- 6.3" 18.5-57.9" 63" 5.9--7.9" IV 4" 2" 14.8" 1,041 lb SSFPSN2-176-787-4-A 17,637 lb 24" +/- 6.3" 20.9-78" 78.7" 5.9--7.9" IV 4" 2.3" 14.6" 1,213 lb MAXIMUM 17,600 lb - - - - 93.7" 94.5" - - IV ------*All dimensional sizes are nominal Fork Options

Product # Fork Size Fork Size Fork Size Fork Size Fork Size SSFPB-055-370-2-A 150-5-36-2 150-5-42-2 150-5-48-2 150-5-54-2 150-5-54-2 SSFPB-055-409-2-A 150-5-36-2 150-5-42-2 150-5-48-2 150-5-54-2 150-5-54-2 SSFPB-066-409-3-A 175-5-36-3 175-5-42-3 175-5-48-3 175-5-54-3 175-5-60-3 SSFPB-066-490-3-A 175-5-36-3 175-5-42-3 175-5-48-3 175-5-54-3 175-5-60-3 Capacity LCD S A B D PA Fork ITA V Z (CofG) Y (CofG) Weight Product # lb in in in in in in width in class in Hor. in Vert. in lb SSFPB-101-490-3-A 2-5-42-3 2-5-48-3 2-5-54-3 2-5-60-3 - - SSFPSN2-110-630-3-A 2-6-42-3 2-6-48-3 2-6-54-3 2-6-60-3 - - MINIMUM 5,500 lb - - 35" 11.4" ------II ------SSFPSN2-176-630-4-A 225-6-48-4 225-6-54-4 225-6-60-4 225-6-72-4 - - SSFPB-055-370-2-A 5,512 lb 24" +/- 3.9" 12.8--32.9" 37.0" 1.1" 23.2" 2.8-4.9" II 2.2" 0.9" 8.5" 137 lb SSFPSN2-176-787-4-A 225-6-48-4 225-6-54-4 225-6-60-4 225-6-72-4 - - SSFPB-055-409-2-A 5,512 lb 24" +/- 3.9" 12.2--37.2" 40.9" 1.1" 23.2" 2.8-4.9" II 2.2" 0.9" 8.5" 198 lb SSFPB-066-409-3-A 6,614 lb 24" +/- 3.9" 15--37.2" 40.9" 1.5" 23.6" 3.9--5.9" III 2.5" 1.1" 10.7" 258 lb SSFPB-066-490-3-A 6,614 lb 24" +/- 3.9" 13.8-45.3" 49.0" 1.5" 23.6" 3.9--5.9" III 2.5" 1.1" 10.7" 265 lb SSFPB-101-490-3-A 10,120 lb 24" +/- 3.9" 13.8-45.3" 49.0" 1.6" 23.6" 3.9--5.9" III 3.2" 1.9" 13.4" 399 lb SSFPB-101-551-3-A 10,120 lb 24" +/- 3.9" 14-49.4" 55.1" 1.6" 23.6" 3.9--5.9" III 3.2" 1.9" 13.4" 405 lb MAXIMUM 11,000 lb - - 53" 49.5" ------III ------LOAD BACKREST available see page 24 Please reach out to our sales team OEattachments.com | 833-OEA-KAUP 632-5287 FORK VARIETY OE Attachments offers the largest selection of forklift forks in North America. Our forks are available in a number of different styles, mount types, capaci- ties, and custom options. We have our own state-of-the-art in-house fabrica- tion and engineering unit which allows us to fulfill modifications to existing forks or a brand new fork based on an original design.

STYLES: CAPACITIES: Standard ITA » Fork weight capacity starts at 1,000 lbs Shaft Mounted and increases to 300,000 lbs. Telehandler » Fork thicknesses range from 1” to 6”. Fully Tapered & Polished (FTP) » Fork widths start at 2” and range Blank up to 16”. Block Brick MOUNTS: Bucket Forks are available with ITA or shaft mounts. ITA forks are available in Class I, II, III, IV, Inverted and V capacities. Shaft mounts can be Peek-A-Boo positioned offset, inset, rear shaft, or inline. Coil Handling Custom mounts available upon request. Gypsum Handling Rotator Lumber Mining Terrain Multi-Pallet Handler Standard ITA Forks Clamp Custom

FTP Forks Blank Forks

Telehandler Forks Custom Forks Block Forks

OEAK-BROC-2021-04-29 FORK WEAR INDICATOR JoinFORK in the future of forklift WEAR forks. The new standard INDICATOR for identifying fork wear is here. The Fork Wear Indicator makes it easy to quickly determine fork wear so you can plan for replacement and prevent fork-related accidents.

Thickness Width Length Class

1.25 in 4 in 36, 42, 48 in II 1.5 in 3 in 48 in II 1.5 in 4 in 32, 36, 40, 42, 48, 54, 60, 72 in II 1.5 in 5 in 36, 42, 48, 54, 60, 72 in II 1.5 in 5 in 48 in III 1.75 in 4 in 36, 40, 54 in II 1.75 in 4 in 42, 48, 60, 72 in II & III 23 1.75 in 5 in 36, 42, 48, 54, 60, 72 in II & III 1.75 in 5 in 84 in III 2 in 4 in 48, 72, 96 in II & III 2 in 4 in 60 in III 2 in 5 in 36, 42, 48, 54, 60, 72, 84, 96 in III 2 in 6 in 36, 42, 54 in III 2 in 6 in 48, 60, 72, 96 in III & IV 2.5 in 6 in 48, 60, 72, 96 in IV

MODIFICATIONS AND CUSTOMIZATIONS: OE Attachments is able to modify or customize any product to fit your exact specifications at our own in-house factory. Our engineering team works to provide customers with custom solutions to solve unique product challenges. Some common modifications we make are: » Adjustments to the fork shaft mount placement. » Custom fork mounts and adapters.

» Custom couplers and mount types for attachments. » Size adjustments and unique custom features to existing products.

Additionally, over the past 50 years we have worked with OEMs on an extensive variety of exclusive and custom product designs. Our highly-skilled engineering team is ready to collaborate with you.

OEattachments.com | 833-OEA-KAUP 632-5287 LOAD BACK REST

Our load backrests are OSHA-compliant and are designed to prevent loads from shifting backwards when the carriage is lifted to full height. This allows the load to rest against a square, flat surface that makes transportation safer. All load backrests are engineered-to-order which ensures they’ll be a perfect fit.

Customized Fit All load backrests are engineered-to-order, ensuring a perfect fit and easy installation.

OSHA-Compliant If a load is not consistently one piece, shrink wrapped, banded, or crated, OSHA requires loads that exceed the top of the forks to include a load backrest.

FORK CLAMPS Load Backrest models LOAD BACKREST: OEA Kaup Clamps feature mounting Product # B H Weight LBCB-382-A 38.2" 19.7" 53 lb lugs enabling a backrest to be fitted LBCB-409-A 40.9" 19.7" 57 lb conveniently without drilling or any other LBB2-425-A 42.5" 19.7" 59 lb modifications. Parts required for mounting, LBB15-425-A 42.5" 19.7" 64 lb LBCB-472-A 47.2" 19.7" 74 lb such as spacers and screws, are supplied.

CARTON APPLIANCE CLAMPS Load Backrest models Class Product # B H ITA Weight LBCCB1-425-2-A 42.5" 19.7" II 59.1 lb

CALL 913-599-9040 CUSTOM SIZE AVAILABLE

OEAK-BROC-2021-04-29 LOAD BACK REST

FORK POSITIONERS Load Backrest models Class Product # B H ITA Weight LBB-370-2-A 37" 18.5" II 64 lb LBB-409-2-A 40.9" 18.5" II 71 lb LBB-409-3-A 40.9" 16.9" III 67 lb LBB-490-3-A 49" 16.9" III 80 lb LBB-490-3-A 53" 16.9" III 80 lb LBSN2-630-3-A 63" 16.9" III 103 lb LBSN2-630-4-A 63" 28.7" IV 219 lb LBSN2-787-4-A 78.7" 28.7" IV 274 lb 25

SIDE SHIFTERS Load Backrest models Class Product # A B H ITA Weight LBP5-370-2-A 37" 16.1" 23.6" II 62 lb LBP5-409-2-A 40.9" 16.1" 23.6" II 68 lb LBP5-370-3-A 37" 12.2" 19.7" III 58 lb LBP5-409-3-A 40.9" 12.2" 19.7" III 64 lb LBP5-451-3-A 45.1" 12.2" 19.7" III 70 lb LBP5-490-3-A 49" 12.2" 19.7" III 76 lb LBP2-610-3-A 61" 12.2" 19.7" IV 95 lb LBP2-720-3-A 72" 12.2" 19.7" IV 112 lb LBP2-858-3-A 85.8 18.9 28.9" IV 280 lb

OEattachments.com | 833-OEA-KAUP 632-5287 CONTACT US

OEAttachments.com [email protected]

833-OEA-KAUP | 913-599-9040 632-5287 16000 West 108th street Lenexa, KS 66219, USA

Arrow Acquisition LLC, founded in 1969, is based in Lenexa, KS. It is the parent company of Arrow Material Handling Products, OE Attachments, and Sidney Attachments. For more information visit arrowacq.com

OEAK-BROC-2021-04-29 NOTES

NOTES

27

OEattachments.com | 833-OEA-KAUP 632-5287 16000 W 108TH ST., LENEXA, KS 66219, USA OEATTACHMENTS.COM 833-OEA-KAUP 632-5287 OEAK-BROC-2021-04-29