Clothes Hanger (Edited from Wikipedia)

Clothes Hanger (Edited from Wikipedia) SUMMARY A clothes hanger, coat hanger, or coathanger, is a device in the shape of: Human shoulders designed to facilitate the hanging of a coat, jacket, sweater, shirt, blouse or dress in a manner that prevents wrinkles, with a lower bar for the hanging of trousers or skirts. Clamp for the hanging of trousers, skirts, or kilts. Both types can be combined in a single hanger. There are three basic types of clothes hangers. The first is the wire hanger, which has a simple loop of wire, most often steel, in a flattened triangle shape that continues into a hook at the top. The second is the wooden hanger, which consists of a flat piece of wood cut into a boomerang-like shape with the edges sanded down to prevent damage to the clothing, and a hook, usually of metal, protruding from the point. Some wooden hangers have a rounded bar from tip to tip, forming a flattened triangle. This bar is designed to hang the trousers belonging to the jacket. The third kind and most used in today's world are plastic coat hangers, which mostly mimic the shape of either a wire or wooden hanger. Plastic coat hangers are also produced in smaller sizes to accommodate the shapes of children's clothes. Some hangers have clips along the bottom for suspending skirts. Dedicated skirt and trousers hangers may not use the triangular shape at all, instead using just a rod with clips. Other hangers have little rings coming from the top two bars to hang straps from tank-tops on. Specialized pant hanger racks may accommodate many pairs of trousers. Foldable clothes hangers that are designed to be inserted through the collar area for ease of use and the reduction of stretching are an old, yet potentially useful variation on traditional clothes hangers. They have been patented over 200 times in the U.S. alone, as in U.S. Patent 0586456, awarded in 1897 to George E. Hideout. 1 HISTORY Some historians believe President Thomas Jefferson invented a forerunner of the wooden clothes hanger. However, today's most-used hanger, the shoulder-shaped wire hanger, was inspired by a coat hook that was invented in 1869 by O. A. North of New Britain, Connecticut. An employee of the Timberlake Wire and Novelty Company, Albert J. Parkhouse of Jackson, Michigan has also been credited with the invention. The story goes that one morning in 1903, Parkhouse arrived to work to find that all coat hooks were taken. Annoyed, he took a piece of wire, bent it into the shape we would recognize today, and hung his coat. Also credited is Christopher Cann in 1876 as an engineering student at Boston University. In 1906 Meyer May, a men's clothier of Grand Rapids, Michigan, became the first retailer to display his wares on his wishbone-inspired hangers. Some of these original hangers can be seen at the Frank Lloyd Wright designed Meyer May House in Grand Rapids. In 1932 Schuyler C. Hulett patented an improved design, which used cardboard tubes mounted on the upper and lower parts of the wire to prevent wrinkles, and in 1935 Elmer D. Rogers added a tube on the lower bar, which is still used. Hangers can be made in wood, wire, plastic, rarely from rubber substance and other materials. Some are padded with fine materials, such as satin, for expensive clothes, lingerie and fancy dresses. The soft, plush padding is intended to protect garments from shoulder dents that wire hangers may make. A caped hanger is an inexpensive wire clothing hanger covered in paper. Caped hangers are used by dry cleaners to protect garments after cleaning. Used wire hangers may be recycled, or returned to the dry cleaner. 2.

Load more