Arkema Coating Resins

EUROPE / Middle East / Africa Resins for Industrial Coatings

You can expect more choices from Arkema Coating Resins. And we deliver.

Our wide range of choices Delivering more choices Choose one of our in resins for industrial resins to formulate Table of Contents helps you optimize performance coatings. coatings for your most Resins for Metal Coatings...... 2 demanding applications. 2 Pack Hydroxyl Functional Acrylics...... 4 and value in your applications. Our goal is to help you identify a NISO...... 6 product from one of our technology • General Industrial coatings for Thermoplastic Acrylics...... 6 platforms that enables you to formu- Thermoset Acrylics...... 6 metal late a competitive advantage into Short and Medium Oil Oxidising • Vehicle Refinishing coatings your product line. This product guide Alkyds...... 8 presents our full line of both solvent- • Transportation, Agricultural and Modified Resins...... 10 You can rely on Arkema Coating Resins for a comprehensive selection of resins. borne and waterborne polymers and Construction Equipment coatings Silicone Modified Resins...... 12 introduces new products developed The depth of our product line will help you find the best balance of performance • Marine and Protective coatings 2 pack Hydroxyl Functional and and value for virtually any application. in response to market needs. • Industrial Wood finishes Saturated Polyester Resins...... 12 Water-Borne Alkyds...... 14 The Arkema Coating Resins Water-Borne Acrylic Emulsion...... 14 product offering for industrial • Global Support • Sustainability and Quality coatings includes: Liquid Reactive Polyamides...... 16 Arkema Coating Resins operates Arkema Coating Resins is committed of the communities where we globally to ensure you have access to meet the quality and sustainability manufacture and market our Resins for Industrial Wood • Synaqua® Alkyd Emulsions and to product and technical support needs of its customers, and to products. For full information on Coatings...... 18 water dilutable resins wherever you operate. operate in a manner that helps quality, human health, safety and Water-Borne APEO Free Emulsions...... 20 protect the safety and health of sustainability visit our web site: Polyurethane (Alkyd Resins)...... 22 • SynOCRYL® Thermoset and customers, employees and members www.arkemacoatingresins.com. Polyurethane (Acrylic Resins)...... 24 Thermoplastic Acrylics Nitrocellulose (Alkyd Resins)...... 24 Acid Curing (Alkyd Resins)...... 26 ® • Synocure Acrylic Polyols for UV Radiation Curing two component polyurethane (Unsaturated Polyester Resins)...... 26 coatings and acrylic resins for isocyanate-free two component coatings

• Synolac® Solvent-based Alkyd and Modified Alkyd resins; two- pack hydroxyl-functional polyester resins; silicone-modified resins

• Unithane® Urethane Alkyds and Oils

• Crayamid® Reactive Polyamide hardeners for epoxy resins

• Encor® 100% Acrylic; Styrene Acrylic; and Vinylic Copolymers Emulsions

• SNAP® Structured Nano-Acrylic Polymers

1

Resins for Metal Coatings

Based on our strong collaboration partnership with customers and our understanding of applications,we are able to provide innovative solutions for Metal coatings markets.

The Metal coating market covers a durability, gloss and colour retention, Our broad technology toolbox very wide range of product types, from simple alkyds to highly durable consists of water-borne and suitable for application from light and resistant 2-component acrylics. solvent-borne resins, based on use to extremes of performance. There is also the modern requirement acrylics, polyurethanes, polyesters This is specific for the coating for these properties at reduced VOC and alkyds. type. For primers – adhesion and as specified by the different regula- corrosion protection. For topcoats – tions worldwide.

2 3 High Solids—2 pack hydroxyl functional acrylics Functional Acrylics 2 Pack Hydroxyl Typical Characteristics Main Application Fields

Typical Typical VOC g/l @ Com- Protec- % OH on I max Car General Reference % NVC Volatile A Viscosity Viscosity 300 mPa.s in 2K Clearcoat Topcoat ACE mercial tive Specific Properties solids* mgKOH/g* Refinish Metal mPa.s@25°C clears Vehicles Marine SYNOCURE® Low NCO requirement. Cost effective VOC compliant protective 2.1 80 Butyl Acetate 10 7500 335 854 BA 80 • • P coatings with good durability. 2 Pack Hydroxyl Functional Acrylics SYNOCURE® 2.9 70 Butyl Acetate 10 1500 335 • • • P P P Low NCO requirement. Fast air drying and early hardness. NISO/Thermoplastic/

9293 BA 70 Thermoset Acrylics SYNOCURE® Sol100/ 3.1 70 10 2500 340 VOC compliant resin for general purpose & protective coatings. 9237 S 70 Xylene 2:1 • • P SYNOCURE® Exceptional exterior durability. High quality protective coatings. Air dry 3.1 70 EEP** 8 5000 395 865 EEP 70 • • P P P P & low bake. SYNOCURE® Designed for very fast cure response when force-dried. Good thru-dry & 4.1 80 Butyl Acetate 10 7500 295 852 BA 80 • • P P P hardness in thick films.

Thermoset Acrylics SYNOCURE® Fast cure response when force-dried. Good handling properties at NISO/Thermoplastic/ 4.1 80 Butyl Acetate 10 15000 315 853 BA 80 • • P P P elevated temperatures. Short & Medium Oil Short Oxidising Alkyds SYNOCURE® 4.2 75 EEP** 10 3300 325 Excellent force-dry, chemical resistance, exterior durability & flow. 866 EEP 75 • • P P P P P SYNOCURE® BA/EEP 4.2 75 10 3700 330 Excellent application properties, chemical resistance. Low VOC. 9201 S 75 1:3 • • • P P P P P SYNOCURE® 4.5 70 Butyl Acetate 10 6250 365 Excellent chemical resistance. High gloss. 9299 BA 70 • • P P

Oxidising Alkyds SYNOCURE® Sol100/BA Short & Medium Oil 4.9 75 7 6000 355 Very high chemical resistance. Good flow & gloss. 589 S 75 1:2 • • P P P P *calculated on the total solid content of the resin **Ethyl-3-Ethoxy Propionate Modified Resins

Conventional—2 pack hydroxyl functional acrylics

Typical Characteristics Main Application Fields Modified Resins Typical Com- Protec- % OH on I max Car General Reference % NVC Volatile A Viscosity 2K Primer Clearcoat Topcoat ACE mercial tive Specific Properties

solids* mgKOH/g* Refinish Metal Silicone/Polyester mPa.s@25°C Vehicles Marine SYNOCURE® Very high flexibility. Excellent adhesion to galvanised & non-ferrous metals. Excellent

1.2 60 Xylene 8 1800 Resins 857 X 60 • • P modifying resin. SYNOCURE® 1.6 60 Xylene 8 6800 P P Fast dry industrial coatings and cost effective.

Resins 862 X 60 • • • SYNOCURE® 2.7 60 Xylene 10 1700 Good balance of price & performance. 9216 X 60 • • P Silicone/Polyester SYNOCURE® 2.7 60 Sol100 10 2400 Good balance of price & performance. Water-Borne Alkyds 878 N 60 • • P & Acrylic Resins & Acrylic SYNOCURE® Xylene/PMA 2.8 57 6 4000 High quality general purpose resin. Fast dry, excellent exterior durability. 867 S 57** 3:1 • • P P SYNOCURE® 4.1 55 Xylene 12 2000 Very good primer/surfacer. Excellent scratch fill. 861 X 55 • • • P P P P P SYNOCURE® Sol100/BA 4.2 60 12 3000 • • • P P P Excellent gloss, gloss retention & durability.

& Acrylic Resins 9212 S 60 3:2

Water-Borne Alkyds Water-Borne SYNOCURE® Xylene/BA 4.5 60 10 2500 Very high gloss. Top of the range. 851 S 60 2:1 • • • P P P P

SYNOCURE® Xylene/BA Liquid Reactive 4.2 65 10 2250 Fast dry and good early hardness. Good weathering performance. Polyamides 9279 S 65 1:3 • • • P P P *calculated on the total solid content of the resin **also available in Butyl Acetate Polyamides Liquid Reactive

4 5 2 pack non-isocyanate acrylics Functional Acrylics 2 Pack Hydroxyl Typical Characteristics Main Application Fields

Com- Protec- I max Typical Viscosity Car General Reference Polymer Type % NVC Volatile A 2K Topcoat ACE mercial tive Specific Properties mgKOH/g* mPa.s@25°C Refinish Metal Vehicles Marine

SYNOCURE® Carboxyl Used in combination with cyclo-aliphatic epoxies for high build air drying exterior 70 Xylene/MP 4:1 14-18 7500 885 S 70 Acrylic • • P P finishes. 2 Pack Hydroxyl Functional Acrylics SYNOCURE® Carboxyl Xylene/BuOH

70 44-52 4500 VOC compliancy. Can be used for direct to metal. Economical ACE topcoats. NISO/Thermoplastic/ 886 S 70 Acrylic 2:1 • • P P P Thermoset Acrylics SYNOCURE® Carboxyl Xylene/BA/ 55 14-17 2500 Used with SYNOCURE® 899 or 899 LM for fast air dry transport & ACE finishes. 890 S 55 Acrylic Sol100/BuOH • • P P P SYNOCURE® Multifunctional VOC compliancy with SYNOCURE® 899 BA 70 LM for PC / Marine & high 70 Butyl Acetate <10 3500 892 BA 70 Acrylic • • P P performance general industrial applications. SYNOCURE® Carboxyl Xylene/BA/ 55 17-23 3800 Used with SYNOCURE® 899 or 899 LM for flexible air dry finishes. 895 S 55 Acrylic Sol100/BuOH • • P P

Thermoset Acrylics SYNOCURE® Epoxy Acrylic NISO/Thermoplastic/ 60 Butyl Acetate — 550 Epoxy Equiv Wt ~380. Curing agent for SYNOCURE® 890, 892 & 895. 899 BA 60 Hardener • • Short & Medium Oil Short Oxidising Alkyds SYNOCURE® Epoxy Acrylic Epoxy Equiv Wt ~415. Curing agent for SYNOCURE® 890, 892 & 895 for improved 70 Butyl Acetate — 650 899 BA 70 LM Hardener • • solid. SYNOCURE® Multifunctional Used with SYNOCURE® 899 ba 70 LM. It combines excellent drying, hardness and 55 Butyl Acetate <10 1500 9436 BA 55 Acrylic • • P P P P low VOC.

*calculated on the total solid content of the resin Oxidising Alkyds Short & Medium Oil Thermoplastic acrylics Modified Resins Typical Characteristics Main Application Fields

Typical Com- Protec- I max Car General Reference % NVC Volatile A Viscosity 1K Primer Clearcoat Topcoat ACE mercial tive Specific Properties mgKOH/g* Refinish Metal mPa.s@25°C Vehicles Marine SYNOCRYL®

Modified Resins 40 Sol100 10 1400 P P 874 N 40 • • Colour retentive & durable lacquers. Used for container coatings. A modifier for SYNOCRYL® chlorinated rubber paints.

40 Xylene 10 600 Silicone/Polyester 874 X 40 • • P P SYNOCRYL® Xylene/MIBK Primer for difficult substrates. Galvanised steel, non-ferrous metals etc. Excellent 50 17 1000 7616 S 50 3:1 • • P adhesion. Good exterior durability. Used for garage doors. Resins

*calculated on the total solid content of the resin Resins

Thermoset acrylics Silicone/Polyester Water-Borne Alkyds

Typical Characteristics Main Application Fields Resins & Acrylic

Typical Viscosity General Reference Polymer Type % NVC Volatile I max mgKOH/g* 1K Stoving Topcoat Can Specific Properties A mPa.s@25°C Metal

SYNOCRYL® Sol150ND/ Acrylamide 60 10 6000 Metal decorating applications. Caps & closures. FDA approved. Clear & pigmented basecoats. 839 SD 60 n-BuOH 3:1 • • P P & Acrylic Resins ®

Water-Borne Alkyds Water-Borne SYNOCRYL Sol150ND/ Acrylamide 50 11 1800 Clear & pigmented basecoats for metal decorating. Good blocking resistance. 7013 SD 50 n-BuOH 1,7:1 • • P

*calculated on the total solid content of the resin Liquid Reactive Polyamides Polyamides Liquid Reactive

6 7 Short and Medium Oil Oxidising Alkyds Functional Acrylics 2 Pack Hydroxyl Typical Characteristics Main Application Fields

Fatty Typical Com- % Fatty I max 1K Car General Protective Reference Acid % NVC Volatile A Viscosity 1K 2K Primer Clearcoat Topcoat ACE mercial Specific Properties Acid mgKOH/g* Stoving Refinish Metal Marine Type mPa.s@25°C Vehicles

SYNOLAC® 27 Soya 60 Xylene 15 4500 P P Good quality general purpose alkyd. NC compatible. 2 Pack Hydroxyl 926 X 60 HV • • • • Functional Acrylics NISO/Thermoplastic/

SYNOLAC® Thermoset Acrylics 27 Soya 60 Xylene 10 2000 High quality fast drying. Good build. 272 X 60 • • • • • P P

SYNOLAC® 30 Soya 60 Xylene 12 7000 Fast drying. General purpose. 5402 X 60 • • • P P P

SYNOLAC® High performance resin giving fast drying & high gloss with 33 Linoleic 60 Xylene 15 3100 P P P Thermoset Acrylics 5014 X 60 • • • excellent water spot resistance. NISO/Thermoplastic/ Short & Medium Oil Short SYNOLAC® Oxidising Alkyds 35 Soya 75 Xylene 10 6700 High solids air dry. VOC compliant. 3132 X 75 • • • P P P

SYNOLAC® 35 Tofa 60 Xylene 20 2500 Fast drying and good build. 8035 X 60 • • • P

SYNOLAC® Oxidising Alkyds 38 Tofa 60 Xylene 15 10500 P Air dry & stoving finishes and economical. Short & Medium Oil 1035 X 60 • • •

SYNOLAC® Modified Resins 41 Soya 60 Xylene 15 4000 Stoving topcoat. 140 X 60 • • • P

SYNOLAC® 42 Mixed 75 Xylene 12 6000 High solids air dry. 8008 X 75 • • • P

Modified Resins SYNOLAC® 47 Soya 65 Xylene 10 2700 Air drying, stoving & 2K systems, industrial finishes & ACE. 947 X 65 • • • • P P P P Silicone/Polyester

SYNOLAC® Brush applied primers & topcoat. Good through dry & chemical 48 Linseed 50 WD 10 11000 1421 WD 50 • • • • P resistance. Resins

SYNOLAC® Good all round properties for ACE & Transport finishes.

Resins 55 Linoleic 50 WS 9 2500 78 W 50 • • • P P P P Economical.

Silicone/Polyester SYNOLAC® Brush applied primers & topcoat, Good through dry & chemical 53 Linseed 50 WD 12 3300 5053 WD 50 • • • P resistance. Water-Borne Alkyds & Acrylic Resins & Acrylic *calculated on the total solid content of the resin & Acrylic Resins Water-Borne Alkyds Water-Borne Liquid Reactive Polyamides Polyamides Liquid Reactive

8 9 Modified Resins (styrenated, acrylated, phenolic, epoxy ester, urethane) Functional Acrylics 2 Pack Hydroxyl

Typical Characteristics Main Application Fields High Solids

Typical Com- % Fatty Fatty Acid I max Modifica- 1K Car General Protective Reference % NVC Volatile A Viscosity 1K 2K Primer Clearcoat Topcoat ACE mercial Specific Properties Acid Type mgKOH/g* tion Stoving Refinish Metal Marine mPa.s@25°C Vehicles

2 Pack Hydroxyl ®

Functional Acrylics SYNOLAC 30 DCO 50 Xylene 20 3000 Styrene Primers for PU topcoats. Compatible with NC. 5250 X 50 • • • • P NISO/Thermoplastic/ Thermoset Acrylics

SYNOLAC® DCO/ Very fast drying paints, excellent gloss, hammer 36 60 Xylene 15 2300 Styrene 40 X 60 Soya • • P P finishes.

SYNOLAC® Extremely fast dry paints, good durability, colour 25 Linoleic 55 Xylene 18 1600 Acrylic 5201 X 55 • • P P P retention & early water spot resistance. Thermoset Acrylics

NISO/Thermoplastic/ SYNOLAC® High solids VOC compliant. Fast air drying

29 Soya 74 Xylene 10 7000 Acrylic & Medium Oil Short 3133 X 74 • • P P P alkyd, can obtain < 420g/l. Oxidising Alkyds

Fast air drying paints. Aliphatic based. SYNOLAC® WS/ 34 Linoleic 50 12 2000 Acrylic Excellent durability & colour retention. Also used 5237 S 50 Xylene • • P P for aerosol.

Fast air dry anti-corrosive primers with excel- SYNOLAC® Pheno- 31 DCO 60 Xylene 17 3500 lent adhesion, corrosion, salt spray & chemical 7503 X 60 lic/Rosin • • P P P P

Oxidising Alkyds resistance. Short & Medium Oil

Linseed/ SYNOLAC® Pheno- Anti-corrosive primers with good drying speed, 38 Tofa/ 60 WS/MP 20 2700 Modified Resins 443 S 60 lic/Rosin • • • P P P P adhesion & chemical resistance. Economical. Tung

SYNOLAC® Linseed/ Pheno- Better water resistance than the SYN 443 types 33 60 Xylene 20 5500 2833 X 60 Tung lic/Rosin • • P P P P but slower drying.

® Anti-corrosive primers with very fast drying and Modified Resins SYNOLAC Linoleic/ Pheno- 38 60 Xylene 12 4000 early water resistance. Good adhesion and 385 X 60 Tung lic/Rosin • • • P P P P chemical resistance. Silicone/Polyester

SYNOLAC® Linseed/ 65 70 WD 16 2800 Phenolic Formulated for free aromatic coatings. 1180 WD 70 Tung • • • • P P Resins

SYNOLAC® Epoxy Air dry & stoving primers. Good adhesion & high Resins 40 Linoleic 55 Xylene 6 2350 8236 X 55 ester • • • P P chemical resistance Silicone/Polyester SYNOLAC® Linoleic/ Epoxy Very fast air dry. Anti-corrosion primers with good 40 60 Xylene 4 2000 5387 X 60 Rosin ester • • P P P P chemical & abrasion resistance. Water-Borne Alkyds & Acrylic Resins & Acrylic

UNITHANE® Anti-corrosive primers with fast dry & good 37 Mixed 60 Xylene 3 3500 Urethane 373 X 60 • • • • P P P P chemical resistance.

UNITHANE® General purpose urethane alkyd with good 61 Linoleic 55 WD 3 1650 Urethane 655 WD 55 • • P abrasion resistance and drying properties. & Acrylic Resins Water-Borne Alkyds Water-Borne *calculated on the total solid content of the resin Liquid Reactive Polyamides Polyamides Liquid Reactive

10 11 Silicone Modified Resins Functional Acrylics 2 Pack Hydroxyl Typical Characteristics Main Application Fields

Typical Silicone I max 1K General Protective Reference Polymer Type % NVC Volatile A Viscosity Modification 1K Topcoat Specific Properties mgKOH/g* Stoving Metal Marine mPa.s@25°C (%)

SYNOLAC® Isophthalic

2 Pack Hydroxyl 41 Xylene 20 300 25 P P Fast air drying or stoving. Used where a combination of corrosion & heat resistance is required. Functional Acrylics 5140 X 41 Linseed Alkyd • • • NISO/Thermoplastic/ Thermoset Acrylics Special FA SYNOLAC® Isophthalic 70 D40 10 4000 30 High quality air dry decorative topcoats with excellent weatherability. 2700 WD 70 • • P Alkyd

*calculated on the total solid content of the resin 2 pack Hydroxyl Functional and Saturated Polyester Resins Thermoset Acrylics NISO/Thermoplastic/

Typical Characteristics Main Application Fields & Medium Oil Short Oxidising Alkyds Typical- Com- Protec- I max 1K Car General Reference % OH on % NVC Volatile A Viscosity 1K 2K Primer Clearcoat Topcoat ACE CAN mercial tive Specific Properties mgKOH/g* Stoving Refinish Metal solids mPa.s@25°C Vehicles Marine

SYNOLAC® Good flexibility and good compatibility with 4.3 80 Butyl Acetate 12 2500 3636 BA 80 • • • P P P P polyesters and acrylics. Modifying resin. Oxidising Alkyds Short & Medium Oil SYNOLAC® For high build coatings — used as 2-pack PU 5.0 80 Butyl Acetate 16 5500 1529 BA 80 • • • P P P P system. Modified Resins

Modifying resin to improve build,VOC,application properties such as flow, gloss & DOI. Excellent SYNOLAC® wetting, improved adhesion, chemical & salt 7.6 100 — 3 900 5085 • • • • • P P P P P spray resistance. High flexibility (even down to -25OC) & improved chip resistance. Excellent compatibility with acrylics & polyesters. Modified Resins

SYNOLAC® 2 piece 3 piece cans & aerosol. Excellent 30 60 Sol150ND 10 12000 P

153 ND 60 • • • • • flexibility & forming properties. Silicone/Polyester Resins SYNOLAC® Overprint varnishes. Wet on wet. Also basecoat 50 60 Sol150ND 12 3200 267 ND 60 • • • • • P for metal decoration applications Resins *calculated on the total solid content of the resin Silicone/Polyester Water-Borne Alkyds & Acrylic Resins & Acrylic & Acrylic Resins Water-Borne Alkyds Water-Borne Liquid Reactive Polyamides Polyamides Liquid Reactive

12 13 Water-Borne Alkyds Functional Acrylics 2 Pack Hydroxyl Typical Characteristics Main Application Fields

Typical I max 1K Commercial Protective Reference Polymer Type % NVC Volatile A Viscosity 1K 2K Primer Topcoat ACE CAN General Metal Specific Properties mgKOH/g* Stoving Vehicles Marine mPa.s@23°C

SYNAQUA® Alcohol/ In water soluble stoving systems to eliminate cissing &

2 Pack Hydroxyl Acrylic 48 — 10000 P Functional Acrylics 811 S 48 water • • • other defects. NISO/Thermoplastic/ Thermoset Acrylics SYNAQUA® Ethoxy Epoxy Ester 60 70 3250 Good adhesion to glass. 2350 EP 60 Propanol • • • • P

SYNAQUA® Modified 2-pack PU topcoats with high gloss, good chemical 80 PGDME 55 20000 3510 SW 80 OFPE • • • • • P P P P resistance & corrosion resistance.

Thermoset Acrylics SYNAQUA® NISO/Thermoplastic/ Alkyd 50 Water — <300 Extremely low VOC content, high gloss. 4804 • • • P Short & Medium Oil Short Oxidising Alkyds *calculated on the total solid content of the resin

Water-Borne Acrylic Emulsions

Oxidising Alkyds Typical Characteristics Main Application Fields Short & Medium Oil Typical Protec- Reference Transpor- General

Polymer Type % NVC MFFT Ph Viscosity 1K 2K Primer Topcoat DTM ACE tive Specific Properties Modified Resins tation Metal mPa.s@23°C Marine

ENCOR® Fast drying and good chemical resistance (1.3% OH on solids). Acrylic 43 44 7.5 <1000 2171 • • • P P

ENCOR® Styrene- Modified Resins 43 40 7.5 <5000 Recommended binder for metal primer. 2401 Acrylic • • P P

Based on Arkema’s SECHA* new technology, ENCOR* 2433 is Silicone/Polyester ENCOR® Functional suitable for Direct to Metal application. Main benefits are exceptional 50 20 9 <2000 2433 Acrylic • • • • P P P P barrier properties, quick drying, good gloss and adhesion on different metallic substrates. Resins *SElf Crosslinking Hydrophobic Acrylic Resins Silicone/Polyester Water-Borne Alkyds & Acrylic Resins & Acrylic & Acrylic Resins Water-Borne Alkyds Water-Borne Liquid Reactive Polyamides Polyamides Liquid Reactive

14 15 Liquid Reactive Polyamides Functional Acrylics 2 Pack Hydroxyl Typical Characteristics Main Application Fields

Amine Total Amine Typical Active Commercial General Protective Reference % NVC Volatile Value mg Value mg Viscosity Hydrogen 2K Primer ACE Specific Properties Vehicles Metal Marine KOH/g*(1) KOH/g*(2) mPa.s@25°C Equivalent wt*

CRAYAMID® 60 Xylene 83-93 — 4500 475 Protective coatings with good flexibility, adhesion & long pot life. 2 Pack Hydroxyl • • P P P P Functional Acrylics 100 X 60 NISO/Thermoplastic/ Thermoset Acrylics CRAYAMID® 55000 100 — 115 (40°C) • • P P P P General purpose epoxy/polyamide coatings with excellent corrosion 210-220 230-260 240 resistance. CRAYAMID® 70 Xylene 1500 115 X 70 • • P P P P

® Thermoset Acrylics CRAYAMID

NISO/Thermoplastic/ 100 — 290-320 340-380 9000 (40°C) 130 High build epoxy/polyamide coatings. Epoxy based adhesives & castings. 125 • • P P P P Short & Medium Oil Short Oxidising Alkyds

CRAYAMID® Epoxy based castings, laminates & adhesives. Solventless epoxy/ 100 — 350-400 370-410 4500 (40°C) 95 140 • • P P P P polyamide coatings.

CRAYAMID® Very fast surface dry, compatible with liquid epoxy resins & no induction 60 Xylene 205-225 240-270 4500 240 195 X 60 • • P P P P period required. Oxidising Alkyds Short & Medium Oil CRAYAMID® General purpose polyamide adduct, good compatibility & shorter induction 60 Xylene 185-195 200-230 2250 280 230 X 60 • • P P P P period. Modified Resins

(1) using hydrochloric acid method (2) using per-chloric acid method *calculated on the total solid content of the resin

Modified Resins Silicone/Polyester Resins Resins Silicone/Polyester Water-Borne Alkyds & Acrylic Resins & Acrylic & Acrylic Resins Water-Borne Alkyds Water-Borne Liquid Reactive Polyamides Polyamides L iquid Reactive

16 17

Resins for Industrial Wood Coatings

Different technologies are available to satisfy the market demands, although there are important geographical differences in their use in the European wood industry derived from numerous factor such as local tastes, company size, available application system, and environmental pressures or types of wooden substrates used.

The different types of industrial The position of Arkema Coating Resins, which make it possible to offer wood coatings are usually classified as a supplier of products for all the innovative solutions in a changing by technologies in function of their technologies present in the Industrial environment. Our main fields of chemical nature or the drying/curing Wood Finishing market gives us a research work are in Waterbased system. global view of the market challenge, and UV curing technologies.

18 19 Water-Borne APEO FREE EMULSIONS Main Application Fields Water-Borne APEO

Typical Characteristics Joinery Furniture Flat-Stock Free Emulsions

Typical Viscosity in Pig- Pig- Clear Clear Reference Polymer type Non volatile (%) mPa.s@23°C pH MFFT °C Primers Topcoats mented mented Panelling Parquet Specific Properties Sealers Topcoats Sealers Topcoats

ENCOR® 2121 Acrylic/alkyd 41 <100 8.5 3 Joinery primers with good penetration into wood.

Water-Borne Water-Borne •

APEO Free Emulsions ENCOR® 2124 Acrylic 43 <100 7.5 3 • • Joinery topcoats with good outdoor durability.

Good blocking resistance and durability. Clear and ENCOR® 2166 Acrylic 43 <200 8.0 <1 • • pigmented joinery topcoats.

Self-crosslinking emulsion for furniture. Excellent ENCOR® 2167 Acrylic 44 <3000 7.5 46 • • • • • appearance on wood and sandability.

Dual-cure self-crosslinking and hydroxy functional. ENCOR® 2171 Acrylic 43 <1000 7.5 44

• • • • Fast drying 2 K PU. (1.3% OH on solids). Polyurethane

Self-crosslinking emulsion for furniture. Fast ENCOR® 2173 Acrylic 40 <100 7.5 43 • • • • • hardening and sanding.

High water resistant primers and fillers applied on ENCOR® 2180 Styrene/acrylic 43.5 1000 8.5 30 • wood panels. Polyurethane

Cost effective furniture lacquers with excellent water ENCOR® 2181 Styrene/acrylic 43.5 1000 8.5 52 • • • • and stains resistance.

General purpose alkali-soluble for panelling. ENCOR® 2229 Acrylic 50 <500 4.5 10 • Excellent transfer efficiency.

Combinations with alkali-soluble for cost-efficient ENCOR® 2341 Vinyl versatate 50 4500 4.5 <5 • fillers.

ENCOR® 2455 Styrene/acrylic 41 <150 6.5 60 • • Wood stains with homogeneous colouring effect. Polyurethane/ Combinations with alkali-soluble so as to improve Nitrocellulose ENCOR® 2511 Acrylic 47 <550 8.3 6 • water resistance.

High Tg alkali-soluble for roller applied fillers for ENCOR® 2701 Acrylic 50 <100 4.0 59 • panelling.

® Nitrocellulose Polyurethane/ ENCOR 2710 Acrylic 42 <200 8.5 4 • Low MFFT binder for stain-blocking primers.

ENCOR® 2711 Acrylic 43 <1000 9.0 15 • Sandable stain-blocking primers.

UV curable dispersion. Tack-free before UV. Good ENCOR® 2716 Acrylic 40 <100 8.0 <1 • • • • grain definition in open pore finishes.

UV curable dispersion. High functionality. Hard- ENCOR® 2718 Acrylic 45 <1000 8.0 <0 • • • • ness, scratch and chemical resistance.

Multipurpose emulsion for 1K, 2K + NCO and UV ENCOR® 2763 Acrylic 41 <500 8.5 20 • • • • curable finishes for furniture.

Self crosslinking emulsion for combination with UV SNAP® 2147 Acrylic 43 <1000 8.0 8 • • • • curable acrylic emulsions. UV Radiation Curing

• Highly Recommended Acid Curing/ • Suitable Acid Curing/ UV Radiation Curing

20 21 Polyurethane Alkyd Resins APEO Free Emulsions Typical Characteristics Main Application Fields Water-Borne Fatty acid Fatty acid % OH Acid value Typical Viscosity in Clear Pigmented Pigmented Reference content (%) type on solids (max.) Non volatile (%) Volatile mPa.s@25°C Clear Sealers Parquet Specific Properties Topcoats Sealers Topcoats mgKOH/g

SYNOLAC® 30 HCO 4.2 26 70 Butyl Acetate 3800 High gloss topcoats. Compatible with acrylic resins.

Water-Borne Water-Borne 3315 BA 70 • • APEO Free Emulsions SYNOLAC® 30 Mixed 5.0 15 65 Xylene/MEK 13000 General purpose resin for fast drying sealers and topcoats. 5576 S 65 • • •

SYNOLAC® 30 Mixed 5.6 22 55 Xylene/MEK 12600 Cost efficient sealers. Excellent sandability and recoatability. 7035 S 55 • • •

SYNOLAC® Fast drying clear topcoats. Combinations with high viscosity 30 Mixed 3.5 22 75 Xylene/MEK 10000 2126 S 75 • • • resins. Polyurethane

SYNOLAC® 31 Linoleic 4.0 22 80 Butyl Acetate 12000 Fast drying topcoats with excellent levelling. 3364 DBA 80 • • •

Polyurethane SYNOLAC® 31 Mixed 4.8 22 50 Xylene/MEK 11200 Version in xylene of 7025 DBA 65. 7025 S 50 HV • •

SYNOLAC® High gloss non yellowing pigmented topcoats for kitchen 31 Saturated 3.8 10 70 Xylene 5500 1949 X 70 • • cabinet.

SYNOLAC® 33 Mixed 5.0 15 60 Xylene 6250 Sealers and topcoats mainly crosslinked with isocyanurates. 7312 X 60 • • • •

SYNOLAC® 35 Mixed 4.5 22 60 Xylene 6500 Topcoats with excellent levelling and mar resistance. 8465 X 60 • Polyurethane/ Nitrocellulose

SYNOLAC® 36 Mixed 4.4 17 75 Xylene 4200 Long pot life. Combinations with high viscosity resins. 7806 X 75 • • • •

SYNOLAC® Nitrocellulose

Polyurethane/ 36 Mixed 5.7 30 70 Butyl Acetate 1900 Pigmented sealers and topcoats. 377 BA 70 • •

SYNOLAC® 37 Mixed 3.7 10 80 Butyl Acetate 3100 High solids formulations. 5514 DBA 80 • •

SYNOLAC® 41 Castor 4.7 23 60 Xylene 2200 Flexible resin for highly pigmented sealers. 5512 X 60 •

SYNOLAC® Good compatibility with isocyanurates. Sealers and matt 44 Mixed 4.5 15 60 Xylene 4000 1567 X 60 • • finishes.

®

SYNOLAC Good compatibility with isocyanurates. Sealers and matt UV Radiation Curing 44 Mixed 4.5 15 75 Butyl Acetate 7000 8467 DBA 75 • • finishes. Acid Curing/

SYNOLAC® 51 Castor 5.2 16 60 Xylene 1800 Highly pigmented fillers for wood and MDF. 8475 X 60 • •

® Acid Curing/ SYNOLAC 53 Castor 4.2 15 70 Butyl Acetate 2600 Good flexibility. Highly pigmented sealers. 539 BA 70 • • • • UV Radiation Curing • Highly Recommended • Suitable

22 23 Polyurethane Acrylic Resins APEO Free Emulsions Typical Characteristics Main Application Fields Water-Borne % OH Acid Value Typical Viscosity Clear Clear Pigmented Pigmented Reference Non volatile (%) Volatile on solids (max.) in mPa.s@25°C Specific Properties Sealers Topcoats Sealers Topcoats mg.KOH/g.

SYNOCURE® 40 Butyl Acetate 1.0 12 3000 Fast drying and hardening without CAB.

Water-Borne Water-Borne 210 BA 40 • • • APEO Free Emulsions SYNOCURE® 50 Butyl Acetate 1.3 12 2600 Quick solvent release and good hardness. 213 BA 50 • • • •

SYNOCURE® 60 Xylene 1.5 8 6800 Primers with good adhesion on melamine substrates. 862 X 60 • •

SYNOCURE® 50 Xylene/Butyl Acetate 1.6 10 5000 Used for non yellowing clear and pigmented finishes.

7120 S 50 • • • • Polyurethane

SYNOCURE® 50 Butyl Acetate 2.0 25 3000 Fast hardening. Excellent chemical resistance. 225 BA 50 • • • •

Polyurethane • Highly Recommended • Suitable

NITROCELLULOSE ALKYD Resins Typical Characteristics Main Application Fields

Fatty acid Acid value Typical Viscosity Reference Non volatile (%) Volatile Clear Clear Pigmented Pigmented content (%) Fatty acid type (max.) in mPa.s@25°C Specific Properties Sealers Topcoats Sealers Topcoats

mg.KOH/g. Polyurethane/ Nitrocellulose

SYNOLAC® 26 Linoleic 15 60 Xylene 4500 Cost efficient NC finishes. 8026 X 60 • • • •

SYNOLAC® Nitrocellulose

Polyurethane/ 38 Peanut 12 75 Butyl Acetate 4000 Fast drying. Good blocking resistance. 8000 BA 75 • •

SYNOLAC® 38 Soya 20 75 Butyl Acetate 2500 Filling power. Sandability. 8036 BA 75 • • • •

SYNOLAC® 43 Rapeseed 10 70 Butyl Acetate 1800 General purpose resin. 435 BA 70 • • • •

• Highly Recommended • Suitable UV Radiation Curing Acid Curing/ Acid Curing/ UV Radiation Curing

24 25 Acid Curing ALKYD Resins APEO Free Emulsions Typical Characteristics Main Application Fields Water-Borne Fatty acid Acid value (max.) Typical Viscosity Non volatile (%) Volatile Clear Clear Pigmented Pigmented Parquet- Reference content (%) Fatty acid type mg.KOH/g. in mPa.s@25°C Specific Properties Sealers Topcoats Sealers Topcoats Lacquers

SYNOLAC® Ethanol/MP/ 20 Linoleic 7 67 1600 Precondensated Alkyd/Amino. Low formaldehyde emission furniture lacquers. 350 S 65 Isobutanol • • • • • Water-Borne Water-Borne

SYNOLAC® APEO Free Emulsions 36 Linoleic 30 75 Ethanol 4000 Aromatic-free high solids AC lacquers. 8030 E 75 • • • •

SYNOLAC® 38 Soya 20 75 Butyl Acetate 2500 Long pot-life. Pre-catalyzed lacquers. 8036 BA 75 • • • •

SYNOLAC® 43 Rapeseed 10 70 Butyl Acetate 1800 Versatile binder for AC and NC lacquers. 435 BA 70 • • • •

SYNOLAC® 45 Linoleic 25 70 Xylene/Butanol 4000 General purpose 2 pack lacquers. 1649 XA 70 • • • • Polyurethane • Highly Recommended • Suitable

Polyurethane UV RADIATION CURING Unsaturated Polyester resins

Typical Characteristics Main Application Fields

Acid value Typical Viscosity Reference Non volatile (%) Monomer Clear Clear Pigmented Pigmented (max.) in mPa.s@25°C Specific Properties Sealers Topcoats Sealers Topcoats

SYNOLAC® — DPGDA 30 10000 Styrene free topcoats. Good surface curing and levelling. 2097 M 65 • • • •

SYNOLAC® — DPGDA 30 12500 Styrene free systems. Adhesion improvement in high thickness layers. Easy to matt. 7913 M 70 • • • • Polyurethane/ Nitrocellulose SYNOLAC® — — 30 20000 Styrene free systems. High gloss non Xi topcoats. 9970 • • • •

• Highly Recommended • Suitable Nitrocellulose Polyurethane/ UV Radiation Curing Acid Curing/ Acid Curing/ UV Radiation Curing

26 27 Europe Americas Africa Headquarters Headquarters Production Facilities - Arkema - Colombes, France - Arkema Coating Resins - Cary, NC - Isipingo Durban, South Africa - Coating Resins - Coatex - Genay, France - Arkema Inc. - King of Prussia, PA

Technical and R&D Centers Technical and R&D Centers Asia - Boretto, Italy - Coating Resins - Araçariguama, Brazil - Coatex - Headquarters - Genay, France - Coatex Coating Resins - Arkema Greater China - Shanghai, China - Sant Celoni, Spain - Coating Resins - Cary, NC - Coating Resins - Arkema K.K. - Tokyo, Japan - Verneuil, France - Coating Resins - Sartomer - Chester, SC - Coatex

- King of Prussia, PA Technical and R&D Centers Production Facilities - North Kansas City, MO - Coating Resins - Changshu, China - Coatex - Boretto, Italy - Coating Resins - Guangzhou, China - Sartomer - Coating Resins - Brummen, The Netherlands - Coating Resins Production Facilities - Kyoto Technical Center, Japan - Drocourt, France - Coating Resins - Alsip, IL - Coating Resins - Navi Mumbai, India - Coating Resins - Gissi, Italy - Coating Resins - Araçariguama, Brazil - Coatex - Coating Resins - Pasir Gudang, Malaysia - Coating Resins - Genay, France - Coatex - Chester, SC - Coatex - Moerdijk, The Netherlands - Coatex - Grand Rapids, MI - Coating Resins Production Facilities - Mollet, Spain - Coating Resins - North Kansas City, MO - Coating Resins - Changshu, China - Coatex - Coating Resins - Kynar - Sant Celoni, Spain - Coating Resins - Saint Charles, LA - Coating Resins - Kunsan, Korea - Coatex - Stallingborough, United Kingdom - Coating Resins - Saukville, WI - Coating Resins - Navi Mumbai, India - Coating Resins - Villers St-Paul, France - Coating Resins - Sartomer - Torrance, CA - Coating Resins - Pasir Gudang, Malaysia - Coating Resins - Zwickau, Germany - Coating Resins

28 29 Global Headquarters + Asia Pacific Regional Customer Service Americas Headquarters Americas Arkema Coating Resins Arkema (China) Investment Co., Ltd. 1-866-837-5532 (toll free)

410 Gregson Dr. Shanghai Branch +1-919-469-6700 ARKEMA - A limited liability company with capital of 628.772.150 euros Cook Marcomm Form No. 323-00002 2/13 Cary, NC, (USA) 27511 6/F, Block 1, Life Hub @ Daning Europe +1 919-469-6700 1868 Gonghexin Road +33 (0)1 49 00 79 44 Shanghai 200072, P.R. China European Regional Tel: + 86 21 6147 6888 China Headquarters Fax: + 86 21 6147 6777 / 6746 +86 21 6147 6888 (324) Arkema Coating Resins Asia Pacific (excluding China) 420, rue d’Estienne d’Orves +603-7839-5888 92700 Colombes - France +33 (0)1 49 00 79 44

IMPORTANT: The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided within relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained herein constitutes a license to practice under any patent and it should not be construed as an inducement to infringe any patent and the users is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.

The product data provided in this document are typical values, intended only as guides, and should not be construed as sales specifications.

420, rue d’Estienne d’Orves 92705 Colombes Cedex – France Tél. : 33 (0)1 49 00 80 80 Fax : 33 (0)1 49 00 83 96 arkema.com

Encor®, Synaqua®, Synocure®, Synolac®, Synocryl®, Unithane®, Crayamid® and arkemacoatingresins.com SNAP® are registered trademarks of Arkema Inc.