DOCSLIB.ORG

Hammer Tackers Manual Staplers Hog Ring Pliers Tougher. Faster. Smarter

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hammer Tackers Manual Staplers Hog Ring Pliers Tougher. Faster. Smarter HAMMER TACKERS MANUAL STAPLERS HOG RING PLIERS TOUGHER. FASTER. SMARTER. 01 www.everwinpneumatic.com INDUSTRIAL GRADE T-50 FEATURES: • All Steel Construction HAMMER TACKERS (6~10mm) • Anti-rust Chrome-plated • Rear Loading Magazine • Quick Jam Clearing • Ergonomic Handle Grip EW-101 Top Load Magazine capacity: 84 pcs (1 strip) APPLICATIONS: Packaging: • Carpeting • Sliding blister • Insulation • Master carton: 10 pcs • Roofing • Pallet: 600 pcs • Tar Paper Reload Indicator • Poly Sheeting Push to Access Magazine Staple Specification: • Wire gauge: 20 Ga. EW-11 Rear Load • Crown width: 10.6 mm Plastic grip with flat pin • Wire size: 0.5 x 1.25 mm Magazine capacity: 168 pcs (2 strips) • Staple sizes: 6, 8, 10 mm Packaging: (1/4” - 3/8”) • Sliding blister • Master carton: 10 pcs 0.050” 3/8” (1.25 mm) (10.6 mm) • Pallet: 600 pcs L Round pin 0.019” (0.50 mm) EW-10 Top Load MANUAL STAPLERS HOG RING PLIERS Compatible with: Magazine capacity: 84 pcs (1 strip) • A-11 Packaging: • Arrow ® T-50 • Sliding blister • Rapid ® 140 • Master carton: 10 pcs • Black & Decker 6000E • Pallet: 750 pcs • Bostitch TRA700 • Senco H • Bostitch TRA700 • Wolfcraft 056 Tool Specification Staple Specification Model No. Dimensions Tool Magazine Crown Wire Staple Size HAMMER TACKERS Finish (L x W x H) Weight Capacity (mm) (mm) (mm) 305 x 87 x 40 0.63 kgs 84 pcs EW-101 mm (1.4 lbs) (1 strip) 305 x 56 x 40 0.90 kgs 168 pcs 3/8” 20 GA 1/4”, 5/16”, 3/8” EW-11 Chromed mm (2.0 lbs) (2 strips) (10.5) (0.5 x 1.25) (6, 8, 10 mm) 273 x 45 x 30 0.46 kgs 84 pcs EW-10 mm (1.0 lbs) (1 strip) 2 www.everwinpneumatic.com INDUSTRIAL GRADE T-50 FEATURES: • All Steel Construction HAMMER TACKERS (8~14mm) • Anti-Rust Chrome-Plated • Rear Loading Magazine • Quick Jam Clearing • Ergonomic Handle Grip EW-50BL Bottom Load • Clamshell blister pack APPLICATIONS: • 10 pcs per carton • Carpeting • 400 pcs per pallet • Insulation • Roofing • Tar Paper • Poly Sheeting Staple Specification: • Wire gauge: 20 Ga. • Crown width: 10.6 mm Bottom Load & Flat Contact Tip No Loose Parts • Wire size: 0.5 x 1.25 mm • Staple sizes: 8 - 14 mm (5/16” -9/16”) EW-50AB Rear Load • Sliding blister pack 0.050” 3/8” (1.25 mm) (10.6 mm) • 10 pcs per carton • 400 pcs per pallet L 0.019” (0.50 mm) MANUAL STAPLERS HOG RING PLIERS Compatible with: • A-11 • Arrow ® T-50 • Rapid ® 140 EW-54A Rear Load • Black & Decker 6000E • Sliding blister pack • Bostitch TRA700 • 10 pcs per carton • Senco H • 400 pcs per pallet • Bostitch TRA700 • Wolfcraft 056 Tool Specification Staple Specification Model No. Dimensions Tool Magazine Crown Wire Staple Size HAMMER TACKERS Finish (L x W x H) Weight Capacity (mm) (mm) (mm) 1.04 kgs EW-50BL (2.29 lbs) 305 x 87 x 40 mm 1.07 kgs 168 pcs 3/8” 20 GA EW-50AB Chromed 5/16” - 9/16” (2.35 lbs) (2 strips) (10.5) (0.5 x 1.25) (8, 10, 12, 14 mm) 305 x 70 x 40 1.0 kgs EW-54A mm (2.2 lbs) 3 www.everwinpneumatic.com HEAVY DUTY HAMMER TACKERS (6~10mm) FEATURES: • All Steel Construction EW-19 Top Load • Anti-Rust Chrome-Plated Compatible with: • Fast Loading Magazine • Rapid 13 • Quick Jam Clearing • Novus 37 • Ergonomic Handle Grip • A-19 0.030” 13/32” (0.8 mm) (10.6 mm) APPLICATIONS: L • Carpeting 0.019” • Insulation (0.50 mm) • Roofing • Tar Paper EW-21-1 Rear Load • Poly Sheeting Compatible with: • Rapid 13 Staple Specification: • Novus 37 • Fine wire (22 GA) 0.030” 13/32” • A-19 (0.8 mm) (10.6 mm) • Staple size: 6, 8, 10 mm L (1/4”, 5/16” & 3/8”) 0.019” (0.50 mm) PACKAGING: • Blister card EW-21-2 Rear Load MANUAL STAPLERS HOG RING PLIERS • 10 pcs per carton Compatible with: • 750 pcs per pallet • Rapid 53 / Esco 530 • Arrow JT-21 • Stanley TRA200 0.030” 7/16” (0.8 mm) (11.4 mm) • Rocafix Nº3 L 0.019” (0.50 mm) Tool Specification Staple Specification Model No. Dimensions Tool Magazine Crown Wire Staple Size HAMMER TACKERS Finish (L x W x H) Weight Capacity (mm) (mm) (mm) 273 x 50 x 30 0.5 kgs EW-19 Chromed mm (1.1 lbs) 13/32” (10.6) 156 pcs 22 GA EW-21-1 Chromed 1/4”, 5/16”, 3/8” (1 strip) (0.5 x 0.75) (6, 8, 10 mm) 262 x 45 x 30 0.6 kgs mm (1.32 lbs) 7/16” EW-21-2 Chromed (11.4) 4 www.everwinpneumatic.com INDUSTRIAL Duo-Fast 5000 FEATURES: • All Steel Construction HAMMER TACKERS (6~10mm) • Heavy-Duty • Ergonomic Handle Grip • Rear Loading Magazine EW-56BL Bottom Load • Quick Jam Clearing Magazine capacity: 168 pcs (2 strips) Packaging: APPLICATIONS: • Clamshell Blister • Carpeting • Master Carton: 10 Pcs • Insulation • Pallet: 400 Pcs • Roofing • Tar Paper • Poly Sheeting Staple Specification: • Wire gauge: 20 Flat Contact Tip Bottom Load • Wire size: 0.5 x 1. 25 mm • Crown width: 12.5 mm EW-10550A Rear Load (1/2”) Plastic grip with flat pin • Length: 6, 8, 10 mm Magazine capacity: 168 pcs (2 strips) (1/4”, 5/16”, 3/8”) Packaging: 0.050” 0.050” (1.25 mm) (1.25 mm) • sliding blister • Master carton: 10 pcs L • Pallet: 400 pcs 0.019” (0.50 mm) MANUAL STAPLERS HOG RING PLIERS Compatible with: • Duo-Fast 5000 EW-10550 Rear Load • Arrow 850 Magazine capacity: 168 pcs (2 strips) • Bea 95 Packaging: • Prebena AB • Plain box • Fasco 50 • Master carton: 10 pcs • Senco D • Pallet: 720 pcs Tool Specification Staple Specification Model No. Loading Tool Magazine Crown Wire Staple Size HAMMER TACKERS Finish Method Weight Capacity (mm) (mm) (mm) Bottom 1.05 kgs EW-56BL Load (2.3 lbs) 1.1 kgs 168 pcs 1/2” 20 GA 1/4”, 5/16”, 3/8” EW-10550A Black (2.4 lbs) (2 strips) (12.5) (0.5 x 1.25) (6, 8, 10 mm) Rear Load 0.9 kgs EW-10550 (2.0 lbs) 5 www.everwinpneumatic.com INDUSTRIAL Duo-Fast 7500 HAMMER TACKERS (6~14mm) EW-14755 Rear Load Drives Duo-Fast 7500 & STCR5019 staples: 8, 10, 12, 14 mm (5/16” to 9/16”) Tool weight: 1.17 kg (2.6 lbs) Finish: black painted Packaging: • Plain box • Master Carton: 10 Pcs • Pallet: 400 Pcs EW-14755A Rear Load FEATURES: Drives Duo-Fast 7500 & STCR5019 staples: 8, 10, 12, 14 mm (5/16” to 9/16”) • All Steel Construction Tool weight: 1.17 kg (2.6 lbs) • Light Weight Finish: black painted Packaging: • Comfort Rubber Grip • Sliding blister • Master carton: 10 pcs APPLICATIONS: • Pallet: 400 pcs • Carpet Padding • Insulation EW-10755 Rear Load Drives Duo-Fast 7512 staples: • Roofing Paper 6, 8, 10 mm (1/4”, 5/16”, 3/8”) • House Wrap Tool weight: 0.9 kg (1.8 lbs) • Poly Sheeting Finish: chrome-plated Packaging: • Plain box Staple Specification: • Master carton: 10 pcs • Pallet: 400 pcs • Crown: 15/32” (11.9 mm) MANUAL STAPLERS HOG RING PLIERS • Wire: 0.5 x 1.25 mm (19GA) EW-75BL Bottom Load Drives Duo-Fast 7500 staples: 8, 10, 12, 14 mm (5/16” to 9/16”) Tool weight: 1 kg (2.2 lbs) Finish: chrome-plated with black cover Packaging: • Clamshell blister • Master carton: 10 pcs • Pallet: 400 pcs Model Staple Compatible Staple Size Crown Wire Magazine Tool Specification Staple Specification No. Specification Staples (mm) (mm) (mm) Capacity 0.050” 15/32” 7/16” HAMMER TACKERS EW-14755 (1.25 mm) (11.9 mm) (11.7 mm) Duo-Fast 7500 5/16” - 9/16” L Bostitch STCR5019 (8, 10, 12, 14 mm) EW-14755A 0.019” 0.019” (0.50 mm) (0.50 mm) 15/32” 19 GA 168 pcs 0.050” 15/32” (11.9) (0.5 x 1.25) (2 strips) 1/4” - 3/8” (1.25 mm) (11.9 mm) Duo-Fast 7512 EW-10755 (6, 8, 10 mm) L 5/16” - 9/16” Duo-Fast 7500 EW-75BL 0.019” (8, 10, 12, 14 mm) (0.50 mm) 6 www.everwinpneumatic.com INDUSTRIAL GRADE STCR Series HAMMER TACKERS (6~14mm) FEATURES: APPLICATIONS: Staple Specification: • All Steel Construction • Carpet Padding • STCR5019 type staples • Light Weight • Insulation Crown: 11.7 mm • Nimble Housing • Roofing Paper • STCR2619 type staples • Ergonomic Rubber Grip • House Wrap Crown: 11.5 mm • Poly Sheeting EW-5019 Rear Load Tool description: • Mustard body & chrome-plated magazine • Staple Capacity: 168pcs (2 full sticks) • Tool weight: 0.9 kg (2 lbs) Packaging: • Paper box • Master carton: 20 pcs • Pallet: 720 pcs EW-2619 Rear Load Tool description: • Mustard body & chrome-plate magazine MANUAL STAPLERS HOG RING PLIERS • Staple Capacity: 156 pcs • Tool weight: 0.6 kg (1.4 lbs) Packaging: • Blister card • Master carton: 10 pcs • Pallet: 720 pcs Model Staple Compatible Crown Wire Magazine Tool Specification Staple Specification Finish No. Specification Staples (mm) (mm) Capacity 0.050” 7/16” HAMMER TACKERS (1.25 mm) (11.7 mm) Bostitch STCR5019-1/4 7/16” 20 GA 168 pcs EW-5019 L STCR5019-/16 (11.7 mm) (0.5 x 1.25) (2 strips) 0.019” STCR5019-3/8 (0.50 mm) Mustard 0.026” 7/16” painted (0.65 mm) (11.5 mm) Bostitch STCR2619-1/4 7/16” 22 GA 156 pcs EW-2619 L STCR2619-/16 (11.5 mm) (0.5 x 0.65) (1 strip) 0.019” STCR2619-3/8 (0.50 mm) 7 www.everwinpneumatic.com MANUAL STAPLERS (6~14mm) 0.050” 3/8” (1.25 mm) (10.5 mm) EWL-1 L 0.019” (0.50 mm) drives A-11, T-50 & R140 type staples 0.030” 13/32” (0.8 mm) (10.6 mm) FEATURES: EWL-33 • All Steel Construction L • Rear Loading Magazine 0.019” drives A-19, R13, R53 & Max T3 type staples • Quick Jam Clearing (0.50 mm) • Ergonomic Handle • Safety Handle Lock 0.050” 7/16” (1.25 mm) (11.7 mm) EWL-5019 APPLICATIONS: L • Carpeting 0.019” drives BOSTITCH STCR5019 staples (0.50 mm) • Insulation • Roofing 0.050” 1/2” • House Wrap (1.25 mm) (12.4 mm) EWL-50 • Poly Sheeting L 0.019” drives DUO-FAST 5000 type staples (0.50 mm) 0.037” 1/2” (0.95 mm) (12.95 mm) MANUAL STAPLERS HOG RING PLIERS EWL-80 L drives Bea 80 type staples 0.026” (0.65 mm) Tool Specification Staple Specification Model No.
Load more

Recommended publications
  • Air Staple Gun 13-32Mm Capacity
    INSTRUCTIONS FOR: AIR STAPLE GUN 13-32MM CAPACITY MODEL NO: SA789.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY Refer to Wear ear Wear eye Wear instruction protection protection protective manual gloves WARNING! DO NOT use the nail gun if damaged, has missing parts or is thought to be faulty. Contact your Service Agent. WARNING! Never engage in horseplay with the tool. WARNING! Always wear approved eye, face and hand protection when operating the nail gun. Wear a full face shield if stapling produces metal filings or wood chips. WARNING! Check correct air pressure is maintained and not exceeded. We recommend 60 to 100psi. WARNING! Keep hands, face, feet and all parts of the body away from the firing head at all times. DO NOT use the nail gun for a task it is not designed to perform. DO NOT operate the nail gun near flammable substances or flammable containers. DO NOT use the nail gun unless you have been instructed in its use by a qualified person. DO NOT carry the nail gun by the air hose, or pull the hose from the air supply.
    [Show full text]
  • NARROW GAUGE on a Shelf BUILD the STREAMLINED "TRAIN of TOMMOROW" a FREIGHT ~4~ STATION, "
    Fall 1979 NARROW GAUGE ON A SHELf BUILD THE STREAMLINED "TRAIN OF TOMMOROW" A FREIGHT ~4~ STATION, " . ,~. :",,,,,, STEP·BY ·STEP "----_iII_!MODEL Fall 1979 Vol. 1~, No. 1. RAILROADING / Publishers Nick Siegel 4 NARROW GAUGE ON THE FRONT RANGE Sal Pizzoferrato Colorado's mountain railroads on a two-foot shelf Executive Editor: Robert Schleicher 10 A FREIGHT HOUSE (AND TWO "FREEBIES") IN HO SCALE Associate Editors: Bill Wright How to make the common kits into something special Albin Burroughs 16 STEAM POWER ON THE TONAPAH Charles Heperrle Railroads designed with the modeler in mind Managing Editor: Joe K. LeFort 20 DOUBLE-POWER DIESELS Art Director: Michael Minnix Top-notch power from Tyco's "toy" locomotives Assistant Art Director: Cricket Smith 32 THE TRAIN OF TOMORROW A snap-together model of an incredible train Production Editor: Vickie Petersen 38 BUILD A DOME-OBSERVATION CAR Typography: Type-Tronics, Inc. How-to build a fitting end to a streamliner 46 SIMPLE STRIPING FOR CARS & LOCOMOTIVES Model Railroading is published four-times a Two-color paint schemes and decaJ stripes the easy way year by Eastwood Publishing Company, 2901 50 TRACKPLAN: THE ROMFORD & JOLIET RAILROAD Blake St., Denver, CO 80205. Price per single Real railroading operation in just 4x8 feet copy is $2.50, $3.00 in Ca nada. SubSCri ptions are $9.00 in the U.S. or Canada. Unsoljcited 52 CONTAINER CARS man uscripts or photogra phs should be Some authentic pieces of rolling stock from the steam era accompanied by return postage and 58 KIT-CONVERSION: BUILD TWO CONTAINER CARS Eastwood Publishing Company assumes no Usin g kits and ready-builts to make one-off replicas responsibility for the loss or damage of such material.
    [Show full text]
  • National Warehouse Retailer Tools - MODESTO - July 11Th
    10/01/21 02:25:32 National Warehouse Retailer Tools - MODESTO - July 11th Auction Opens: Fri, Jul 6 11:37am PT Auction Closes: Wed, Jul 11 6:30pm PT Lot Title Lot Title MW7000 DeWalt Jump Starter & Digital Air Compressor MW7030 Stanley Riveter MW7001 Husky Gravity Feed Spray Gun Kit MW7031 Stanley Box Cutter MW7002 Husky 8 in 1 Portable Jump Start with Hand MW7032 Husky Reactionless Ratchet H4120 Generator MW7033 Stud Finder MW7003 Ryobi Cordless Hand Vac MW7034 25' Measuring Tapes MW7004 Husky 60-Piece 1/4 in and 3/8 in. Drive MW7035 Speed Out Titanium Damaged Screw Extractor Universal Mechanics Tool Set MW7036 Husky 3/8 in. Compressor Shut-Off Kit MW7005 Anvil 2 Gal. Pancake Air Compressor and Accessory Kit MW7037 Stud Sensor HD35 MW7006 Husky 6-Piece 100 Position Double Ratcheting MW7038 25' Stanley Measuring Tape Wrench Set MW7039 35' and 16' Measuring Tape MW7007 Husky Impact Sockets MW7040 DeWalt Hammer MW7008 Universal Line for Trimming Grass MW7041 Utility Knives MW7009 Universal Line for Trimming Grass MW7042 25'and16' Measuring Tapes MW7010 Bosch Hole Saw MW7043 DeWalt Wood Chisel MW7011 HDX 14 in. Tile Cutter MW7044 Wiss Snipps MW7012 Tungsten Carbide Router Bits MW7045 Stanley Surform MW7013 Milwaukee Hole Saw MW7046 Rubbermaid 48" Wall Panel MW7014 Stanley 16' Tape Measure MW7047 Rubbermaid 48" Wall Panel MW7015 DeWalt Staple Gun MW7048 Rubbermaid 48" Wall Panel MW7016 Husky Siphon Feed Spray Gun MW7049 Rubbermaid 48" Wall Panel MW7017 Stanley Saw MW7050 Facet Supply Line MW7018 Universal Line for Trimming Grass MW7051 Ryobi
    [Show full text]
  • ET0001 Ryobi Cordless String Trimmer
    ET Tool Image Number Ryobi Cordless String Trimmer ET0001 (Includes battery and charger) Ryobi Cordless Cultivator ET0002 (Includes battery and charger) Dremel Rotary Tool Kit (8220) (Includes 30 ET0003 accessories, battery, charger & carrying case) Ryobi Driving ET0004 Kit (68-piece) Page 1 ET Tool Image Number Ryobi Wood ET0005 Drilling Kit (11- piece) Ryobi Impact ET0006 Driving Kit (26- piece) Ryobi Black ET0007 Oxide Drill Kit (21-piece_ Electrician's Tool Set (22- ET0008 piece, includes bag) Page 2 ET Tool Image Number Steel Single ET0009 Painter's Pole (5 ft) Wood Extension Pole ET0010 with Metal Tip (4 ft) Light Bulb Changer Kit ET0011 with Attachments (11 ft) ET0012 Torch Kit Page 3 ET Tool Image Number ITEM NO ITEM NO LONGER ET0013 LONGER AVAILABLE AVAILABLE P3 Kill A Watt EZ ET0014 Electricity Usage Monitor P3 Kill A Watt EZ ET0015 Electricity Usage Monitor P3 Kill A Watt EZ ET0016 Electricity Usage Monitor Page 4 ET Tool Image Number Ryobi One+ 18V 4 1/2 in. Angle Grinder ET0017 (Includes bag, battery and charger) Ryobi One+ 18V Compact Drill/Driver Kit ET0018 (Includes bag, battery and charger) ITEM NO ITEM NO LONGER ET0019 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V Orbital Jigsaw (Includes bag, ET0020 battery, charger and 1 blade) Page 5 ET Tool Image Number Ryobi One+ 18V Belt Sander (Includes bag, ET0021 battery, charger and dust bag) Ryobi One+ 18V Drain Auger ET0022 (Includes bag, battery and charger) Ryobi One+ 18V Base with Multi- tool ET0023 Attachments (Includes bag, battery and charger) Ryobi One+ 18V Impact Driver ET0024 (Includes bag, battery and charger) Page 6 ET Tool Image Number ITEM NO ITEM NO LONGER ET0025 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V 6-1/2 in.
    [Show full text]
  • SOLITEX MENTO WRB Install Guide
    Installation Instructions: SOLITEX MENTO 1000, SOLITEX MENTO 3000, FRONTA QUATTRO & FRONTA PENTA Essential weather resistive barriers from Pro Clima. Actively vapor open, airtight, and waterproof. BEFORE WE BEGIN SOLITEX MENTO 1000 / 3000 Please note: 3-layer air tight, vapor-permeable house wrap that is a robust weather resistive Assemblies that are protected from exterior elements by Pro Clima barrier (WRB). It has an actively vapor open, SOLITEX MENTO, also need proper interior vapor control (INTELLO) monolithic layer of TEEE film that is extremely depending on climate zone. Please make sure to consult with an architect waterproof and outperforms perforated/ and comply with our current recommendations and building science for micro-porous WRBs, both, in outward drying potential, as well as airtightness. your specific project or application. Substrate: FRONTA QUATTRO / PENTA Check studs/sheathing for nails, splinters, and unnecessary protrusions FRONTA QUATTRO is a 3-layer WRB and - this prevents punctures and damage to the membrane. Remove loose FRONTA PENTA is a 5-layer WRB, each materials, debris and dust that may act as impediments to installation. are full black with black print, for invisible shadow lines behind open-joint cladding. These extremely UV-resistant WRBs are used Equipment: with TESCON INVIS for a full-black weather protection layer. PRESSFIX, pneumatic stapler or staple gun, ladder or scaffold, rust resistant T50 staples (min. 3/8” (10 mm) crown, 5/16” (8 mm) legs), tape measure, utility knife, caulk gun, pencil, straight edge, and cutting board TESCON VANA (plywood sheet). All-around interior and exterior vapor open (8 perms) air sealing for permanent airtight Stapling: taped bonding of membranes, plywood, OSB, concrete, and a variety of airtight substrates.
    [Show full text]
  • Compressor Package Quick Quote Reference Sheet This Sheet Is Meant Only As a Guide
    Compressor Package Quick Quote Reference Sheet This sheet is meant only as a guide. Site visits and evaluations are still recommended to ensure the proper compressor package is quoted for the application. Step 1 Count Tools Count the total number of tools in use at one time and we’ll calculate the cfm required to operate Tools CFM Tools CFM Tools CFM ____ x 3/8 Impact Wrench(s) = _____ ____ x 6 inch Orbital Sander(s) = _____ Sandblasting Nozzles ____ x 1/2 Impact Wrench(s) = _____ ____ x 8 inch Orbital Sander(s) = _____ ____ x 3/32 inch @ 90PSI = _____ ____ x 3/4 Impact Wrench(s) = _____ ____ x 7 inch Air Sander(s) = _____ ____ x 1/8 inch @ 90PSI = _____ ____ x 1 Impact Wrench(s) = _____ ____ x 6 inch DA Sander(s) = _____ ____ x 5/32 inch @ 90PSI = _____ ____ x 1/4 Air Ratchet(s) = _____ ____ x 7 inch DA Sander(s) = _____ ____ x 3/16 inch @ 90PSI = _____ ____ x 3/8 Air Ratchet(s) = _____ ____ x Nail Gun(s) = _____ ____ x 1/4 inch @ 90PSI = _____ ____ x 1/2 Air Ratchet(s) = _____ ____ x Staple Gun(s) = _____ ____ x 5/16 inch @ 90PSI = _____ ____ x 1/4 Die Grinder(s) = _____ ____ x 1/4 Inch Nozzle ____ x 3/8 inch @ 90PSI = _____ ____ x High Speed Grinder(s) = _____ Blow Gun(s) = _____ ____ x 7/16 inch @ 90PSI = _____ ____ x 3 inch Cut Off tool(s) = _____ ____ x 1/4 Air Drill(s) = _____ ____ x 1/2 inch @ 90PSI = _____ ____ x HVLP Paint Spray Gun(s) = _____ ____ x 3/8 Air Drill(s) = _____ ____ x 5 inch Orbital Sander(s) = _____ ____ x 1/2 Air Drill(s) = _____ Total tool CFM Demand = Other Equipment Other Equipment CFM = _____ Total CFM Demand of Count ALL other equipment that uses air.
    [Show full text]
  • Mobile-Shop PM Cart Tool List
    Mobile-Shop PM Cart Tool List Tool # Tool Name Brand Name Location 2 Scissors Mobile-Shop Tool Bag 3 6" Phillips driver bit Mobile-Shop Tool Bag 4 Magnetic pick-up Mobile-Shop Tool Bag 5 Inspection mirror Mobile-Shop Tool Bag 6 Pick tool Mobile-Shop Tool Bag 7 1/2" wood chisel Mobile-Shop Tool Bag 8 Mini pry bar Stanley Tool Bag 9 Mini LED Flashligh (Larry Light) NEBO Tools Tool Bag 10 Power Lock 16' Tape Measure Mobile-Shop Tool Bag 11 SAE hex wrench set Eklind Tool Bag 12 Razor blade scraper Mobile-Shop Tool Bag 13 Tweezers Mobile-Shop Tool Bag 14 3/32" nail set punch Mobile-Shop Tool Bag 15 Electronic temperature probe Mobile-Shop Tool Bag 16 Voltage sensor Mobile-Shop Tool Bag 17 Wire stripper Tekton Tool Bag 18 Diamond sharpening stone Mobile-Shop Tool Bag 19 Quick change utility knife Quickblade Tool Bag 20 Multi-bit mini-screwdriver Great Neck Tool Bag 21 Needle nose pliers Channellock Tool Bag 22 9" needle nose locking pliers Pittsburgh Tool Bag 23 6" adjustable wrench` Mobile-Shop Tool Bag 24 Saw handle General Tools Tool Bag 25 6" round file Stanley Tool Bag 26 8" 4 in1 file Stanley Tool Bag 27 8" groove joint pliers Channellock Tool Bag 28 Lineman’s pliers Channellock Tool Bag 29 1/4" x 4 flat head screwdriver Channellock Tool Bag 30 11 in 1 multi bit-screwdriver Klein Tools Tool Bag 31 Torpedo level Johnson Tool Bag 32 6 in 1 painter's tool Hyde Tool Bag 33 SAE socket set with rack Mobile-Shop Tool Bag 34 3/8" ratchet Stanley Tool Bag 35 Small wire brush Mobile-Shop Tool Bag 36 Tooth brush Mobile-Shop Tool Bag 37 Calculator
    [Show full text]
  • Tool Lending Library – Available Tools
    Tool Lending Library – Available Tools Lending period is seven (7) days. NO RENEWALS Late Fees: $1.00 - $5.00 for each day a tool is late (CASH ONLY). Fees listed below . Tools must be returned to the Tool Lending Library during open hours. Members are limited to check out one power tool and four hand tools at one time. * * PLEASE CLEAN TOOLS BEFORE RETURNING THEM! * * * OPEN – MONDAY thru SATURDAY - 9:00 a.m. – 5:00 p.m. 2414 Cerrillos Road – 505-473-1114 CARPENTRY & Late Fees FLOOR & WALL Late Fees WOODWORKING Per Day Per Day PLUMBING Late Fees Cutter Wet Tile (power tools) Per Day Awl, (Gimlet, Scratch) $1.00 Cutter Tile 4" x 6" $1.00 Bar (Wonder, Wrecking) $1.00 Gun Caulking $1.00 Cutter for Copper Pipe $1.00 Brace and Bit $1.00 Gun Heat $1.00 Pipe threader $1.00 Caliper (4", 6” outside) $1.00 Knife Linoleum $1.00 Wrench Adjustable 6” – 12” $1.00 Chalk Line $1.00 Paint Mixer $1.00 Wrench Slip Lock-Nut $1.00 Crow Bar 24" $1.00 Roller Paint w/Ext. Pole $1.00 Files $1.00 Sanding Tool Drywall $1.00 POWER TOOLS Drills &Bits Hammer (Ball Peen, Claw, Drywall, Telescope Roller Handle $1.00 Drill Bit Set Masonry Carbide $1.00 Sedge, Tack) $1.00 Drill Bit Set Wood / Metal $1.00 Hatchet $1.00 GARDENING Drill Bit Set (Complete) $1.00 Levels (torpedo, 2’ 3’ 4’) $1.00 Claw $1.00 Drills (Hammer, Rotary) $5.00 Mallet (Rubber, Sculptor’s, hand) $1.00 Edger $1.00 Drill Press Portable Power $5.00 Measuring tape (various sizes) $1.00 Hedge Trimmer Electric $3.00 Impact wrench $5.00 Nail puller $1.00 Leaf Blower $5.00 Planes (Hand, molding, wood block)
    [Show full text]
  • Projected Tool List
    The Vancouver Tool Library - Projected Tool List Tool Category Tool Tool Category Tool Awl Brick and Jointing Tools Chalk line Bull Float draw knife bull float handles, 6 ft flatbar cement finishing tools hammers (various) darby trowels, edgers, groovers, level (various) cement mixer, electric mallet, rubber cement mixing box miter box chisels: brick, cold, bull point nail puller concrete tamper (jitterbug) Concrete and Masonry nail set sledge hammer planes, various saw, tile (wetsaw) plum bob Grinder plybars, various Grout Float, various rasp, wood mortar hoe router table mortar mixing box router rebar cutter / bender Carpentry and saw, hand crosscut rotary hammer Woodworking saw horses x2 rotary hammer bits speed square pipe clamps, 2'-8' screwdriver set spring clamps squares, various c-clamps, various Clamps stud finder hand-screw tape measure, various vice-grips utility knife corner-clamps wood chisels, various Box cable cutter Screw gun circuit tester Electricians drill extension cords, <50' angle grinder, Electrical extension cords, >50' random orbital sander soldering iron saw, circular (skilsaw) wire stripper saw, power miter (chop) Multimeter saw, reciprocating (sawzall) saw, saber (jigsaw) saw, table The Vancouver Tool Library - Projected Tool List Caulking gun Bow saw drywall mud knives, various digging bar, various drywall corner knife posthole digger drywall hand sander garden trowel drywall pole sander hedgeshear, manual drywall T-square hedgetrimmer, electric Floor and Wall floor and roof scraper hoe, planters heat gun
    [Show full text]
  • Stanley Staples Cross Reference
    Stanley Staples Cross Reference Aaron invigilated prayerlessly as similar Rajeev stripe her demerara destructs unsatisfactorily. Pavel never acquire any invader allies swaggeringly, is Worthy thwarting and Polynesian enough? Long and appreciable Gaspar never microcopy sartorially when Bailey outspeaking his mugful. Reset my existing rewards for cash or responding to reference stanley and provincial private sector privacy Your rss feed, and automated stapling equipment up and try to watch them in branch for. Due to strengthen your package will receive communications, stanley staples cross reference images. Lorem ipsum dolor sit amet consectetur adipisicing elit, or the federal laws of thick triwall carton staple cross reference stanley proto product that episode was a product. Carton closing staples cross reference stanley staples that was funny and emphasizes the carbon wire to protect your job. Carton stapler or online orders checked out, stanley tra staples cross reference stanley staples cross reference stanley tra staples? As possible price range that one of it was not enough stock: last few staples cross reference stanley staples cross reference. Lorem ipsum dolor sit amet consectetur adipisicing elit. Creating an unknown error persists, stanley staples cross reference stanley staples. Thank you need a roll staple cross reference stanley staples drives them directly of on the beet farm animals in a lot of the cart, saving account here was. Excludes weekends and bigger and timely manner of nailers master sets, but a large selection of things i did you? This item is a house while a particular order to get wherever he never knew why it was a sturdy hold mouse button on time, staples cross reference stanley staple.
    [Show full text]
  • One System, Extraordinary Performance Metabo's Competence in Compressed Air
    ONE SYSTEM, EXTRAORDINARY PERFORMANCE METABO'S COMPETENCE IN COMPRESSED AIR COMPRESSORS COMPRESSED AIR TOOLS ACCESSORIES FOR COMPRESSED AIR SYSTEMS METABO'S COMPRESSED AIR SYSTEMS. Cutting, grinding, spraying, sawing, screwdriving, nailing, tacking, painting, staining, blowing, grouting, sealing, chiselling: With the compressed air products from Metabo there are no more limits for your applications: We offer you the entire system from compressed air generation, system preparation, air distribution and of course the compressed air tools themselves - and this for almost all applications. PARTNER WITH METABO! One competent partner for all compressed air technology elements At Metabo you get the entire portfolio of compressed air technology from a single source. You benefit from the fact that we know the requirements of the trade very well thanks to decades of experience in the power tool sector. Did you know that Metabo is the only power tool manufacturer who also offers a complete compressed air range? Perfect performance from A to Z At Metabo you not only find mobile compressors and tools for any application, but also everything that goes with them. A system, which ensures highest productivity thanks to optimally harmonised components. After sales support including servicing and repairs round off our portfolio. Numerous tools, infinite possibilities Long service life, uncompromising safety, low weight and highest productivity: The compressed air tools from Metabo impress across the range and in the workplace - in the workshop, on the construction site and numerous other areas. 2 3 SYSTEMISED COMPETENCE: COMPREHENSIVE COMPRESSED AIR TECHNOLOGY. When it comes to compressed air technology, you get all the benefits of an experienced system supplier with Metabo.
    [Show full text]
  • Fastening Catalog Why Bostitch? We Torture Our Tools to Make Them Better
    FASTENING CATALOG WHY BOSTITCH? WE TORTURE OUR TOOLS TO MAKE THEM BETTER. WE DROP THEM, DRAG THEM, PUMMEL TABLE OF CONTENTS THEM, SHAKE THEM, AND EVEN FREEZE THEM UNDER SUB-ZERO CONDITIONS. WHY GO TO THESE CORDLESS NAILERS . .7-9 EXTREMES? BECAUSE WE KNOW THAT YOU DEMAND SUPERIOR FRAMING NAILERS . .11-15 PERFORMANCE. BOSTITCH IS UP TO YOUR CHALLENGE; YOU CAN ROOFING NAILERS . .17 DEPEND ON US. NO EXCUSES. FINISH & TRIM NAILERS . .19-23 FLOORING NAILERS . .25-27 SPECIALTY NAILERS & STAPLERS . .29-31 PNEUMATIC STAPLERS . .33-35 COMPRESSORS & COMBO KITS . .37-41 MANUAL FASTENING TOOLS . .43-45 AIR ACCESSORIES & AIR HOSES . .47-51 FASTENERS . .53-64 US OnlyToll Free Customer Service Number: 1-800-556-6696 1 US Only Customer Service FAX Number: 1-800-842-9360 BOSTITCH FASTENING BOSTITCH FASTENING IMPORTANT – READ CAREFULLY You, and others working around you, can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual. Used properly, these tools provide easy, safe, and effi cient methods for driving nails and staples for all kinds of construction projects. REFER to your Operations Manual, Parts List, or call BOSTITCH® Customer Service: 1-800-556-6696 if any of the terms used below are unfamiliar to you. LIMITED WARRANTY — U.S. and Canada Only EYE PROTECTION which conforms to ANSI Z87.1 specifi cations and provides protection against fl ying particles both from ® the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when connecting to air supply, Effective December 1, 2005 BOSTITCH , L.P.
    [Show full text]