Tool Lending Library – Available Tools

Total Page:16

File Type:pdf, Size:1020Kb

Tool Lending Library – Available Tools Tool Lending Library – Available Tools Lending period is seven (7) days. NO RENEWALS Late Fees: $1.00 - $5.00 for each day a tool is late (CASH ONLY). Fees listed below . Tools must be returned to the Tool Lending Library during open hours. Members are limited to check out one power tool and four hand tools at one time. * * PLEASE CLEAN TOOLS BEFORE RETURNING THEM! * * * OPEN – MONDAY thru SATURDAY - 9:00 a.m. – 5:00 p.m. 2414 Cerrillos Road – 505-473-1114 CARPENTRY & Late Fees FLOOR & WALL Late Fees WOODWORKING Per Day Per Day PLUMBING Late Fees Cutter Wet Tile (power tools) Per Day Awl, (Gimlet, Scratch) $1.00 Cutter Tile 4" x 6" $1.00 Bar (Wonder, Wrecking) $1.00 Gun Caulking $1.00 Cutter for Copper Pipe $1.00 Brace and Bit $1.00 Gun Heat $1.00 Pipe threader $1.00 Caliper (4", 6” outside) $1.00 Knife Linoleum $1.00 Wrench Adjustable 6” – 12” $1.00 Chalk Line $1.00 Paint Mixer $1.00 Wrench Slip Lock-Nut $1.00 Crow Bar 24" $1.00 Roller Paint w/Ext. Pole $1.00 Files $1.00 Sanding Tool Drywall $1.00 POWER TOOLS Drills &Bits Hammer (Ball Peen, Claw, Drywall, Telescope Roller Handle $1.00 Drill Bit Set Masonry Carbide $1.00 Sedge, Tack) $1.00 Drill Bit Set Wood / Metal $1.00 Hatchet $1.00 GARDENING Drill Bit Set (Complete) $1.00 Levels (torpedo, 2’ 3’ 4’) $1.00 Claw $1.00 Drills (Hammer, Rotary) $5.00 Mallet (Rubber, Sculptor’s, hand) $1.00 Edger $1.00 Drill Press Portable Power $5.00 Measuring tape (various sizes) $1.00 Hedge Trimmer Electric $3.00 Impact wrench $5.00 Nail puller $1.00 Leaf Blower $5.00 Planes (Hand, molding, wood block) $1.00 Mower $3.00 POWER TOOLS Sanders & Grinder Rasps (various) $1.00 Pick $1.00 Belt Sander $5.00 Saws (12" Miter box, Coping, Posthole digger, Hoes $1.00 Block Sander $5.00 Drywall, Hacksaw, Handsaw) $1.00 Pruner (Branch 7') $1.00 Orbital Sander $5.00 Saws (see power tools) Pruning Shears $1.00 Palm Sander $5.00 Saw Horse (Pair) $2.00 Pruner Bi-Pass $1.00 Grinder, angle $5.00 Scraper, wood block $1.00 Pruning Bow Saw $1.00 Square (12”, 16" w/Level Rakes various $1.00 POWER TOOLS SAWS Drafting 30/60 deg., Speed) $1.00 Shovels (Various Sizes) $1.00 Abrasive Cut Off Saw $5.00 Straight Edge $1.00 Fork 4-Prong $1.00 Band Saw $5.00 Tape, Power 1/2" x 12', Steel, 100' $1.00 Wheelbarrow $3.00 Wet Tile Saw $5.00 Wood Chisel (set) $1.00 Weed Wacker $5.00 Circular Saws (skill saw) $5.00 Miter Saw (Chop) $5.00 CONCRETE & MASONRY ELECTRICAL Router $5.00 Block Hand Concrete Finish $1.00 Electric Cord Spool $1.00 Router table $5.00 Brick Carrier $1.00 Extension Cord (various sizes) $1.00 Table Saw 10" $5.00 Chisel (Cold, Brick) $1.00 Exterior Lamp Cord $1.00 Reciprocating (Saws All) $5.00 Floats $1.00 Pipe Bender (1/2”, 3/4”) $1.00 Saber Saw (Jigsaw) $5.00 Hawk 13-1/2" $1.00 Pliers Electric Crimping $1.00 Scroll Saw $5.00 Knife Taping ( 6 1/2”, 8", 10”) $1.00 Soldering Iron $1.00 Mud Pan $1.00 Wire Stripper $1.00 MISC. Rotary Hammer Drill (see power tools) Work Light Clamp $1.00 Assorted Books $1.00 Trowel (Adhesive, Adhesive, Pointing) $1.00 Appliance dolly $1.00 Scrapper (2-1/2", 4” Wall (Joint Knife) $1.00 MECHANICA L Breathing Mask $1.00 Bolt Cutters $1.00 Calipers $1.00 CLAMPS Files Flat & Taper $1.00 Compressor & pin gun (brads) $5.00 C Clamps $1.00 Hex Keys $1.00 Dolly (4 wheel) $1.00 Corner Clamp $1.00 Hole Saw Set $1.00 Dremel $1.00 Pipe Clamps (3’ – 6’) $1.00 Pliers various $1.00 Electrical Testing Kit $1.00 Spring Clamps $1.00 Rivet Pop $1.00 Goggles $1.00 3 Way Edging Clamp $1.00 Screwdriver various $1.00 Hand Truck $1.00 Sliding Head Bar Clamp $1.00 Socket Set Deep/Driver 1/2" $1.00 Noise Protectors $1.00 Vise Grip (7”, 10", 18”) $1.00 Socket Set Ratchet 1/2" $1.00 Power Planer $5.00 Staple Gun $1.00 Plate Joiner $5.00 LADDERS Staple Gun Electric $1.00 Screen Repair Roller $1.00 Ladders (4’, 6’ 8’, 10’) $5.00 Tin snipes $1.00 Transit & tripod (level) $5.00 Painter’s scaffold $5.00 Vice Grips $1.00 Z:\RESTORE\TLL\TLL Available Tools 12-02-13.docx 12/2/2013 .
Recommended publications
  • Air Staple Gun 13-32Mm Capacity
    INSTRUCTIONS FOR: AIR STAPLE GUN 13-32MM CAPACITY MODEL NO: SA789.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY Refer to Wear ear Wear eye Wear instruction protection protection protective manual gloves WARNING! DO NOT use the nail gun if damaged, has missing parts or is thought to be faulty. Contact your Service Agent. WARNING! Never engage in horseplay with the tool. WARNING! Always wear approved eye, face and hand protection when operating the nail gun. Wear a full face shield if stapling produces metal filings or wood chips. WARNING! Check correct air pressure is maintained and not exceeded. We recommend 60 to 100psi. WARNING! Keep hands, face, feet and all parts of the body away from the firing head at all times. DO NOT use the nail gun for a task it is not designed to perform. DO NOT operate the nail gun near flammable substances or flammable containers. DO NOT use the nail gun unless you have been instructed in its use by a qualified person. DO NOT carry the nail gun by the air hose, or pull the hose from the air supply.
    [Show full text]
  • NARROW GAUGE on a Shelf BUILD the STREAMLINED "TRAIN of TOMMOROW" a FREIGHT ~4~ STATION, "
    Fall 1979 NARROW GAUGE ON A SHELf BUILD THE STREAMLINED "TRAIN OF TOMMOROW" A FREIGHT ~4~ STATION, " . ,~. :",,,,,, STEP·BY ·STEP "----_iII_!MODEL Fall 1979 Vol. 1~, No. 1. RAILROADING / Publishers Nick Siegel 4 NARROW GAUGE ON THE FRONT RANGE Sal Pizzoferrato Colorado's mountain railroads on a two-foot shelf Executive Editor: Robert Schleicher 10 A FREIGHT HOUSE (AND TWO "FREEBIES") IN HO SCALE Associate Editors: Bill Wright How to make the common kits into something special Albin Burroughs 16 STEAM POWER ON THE TONAPAH Charles Heperrle Railroads designed with the modeler in mind Managing Editor: Joe K. LeFort 20 DOUBLE-POWER DIESELS Art Director: Michael Minnix Top-notch power from Tyco's "toy" locomotives Assistant Art Director: Cricket Smith 32 THE TRAIN OF TOMORROW A snap-together model of an incredible train Production Editor: Vickie Petersen 38 BUILD A DOME-OBSERVATION CAR Typography: Type-Tronics, Inc. How-to build a fitting end to a streamliner 46 SIMPLE STRIPING FOR CARS & LOCOMOTIVES Model Railroading is published four-times a Two-color paint schemes and decaJ stripes the easy way year by Eastwood Publishing Company, 2901 50 TRACKPLAN: THE ROMFORD & JOLIET RAILROAD Blake St., Denver, CO 80205. Price per single Real railroading operation in just 4x8 feet copy is $2.50, $3.00 in Ca nada. SubSCri ptions are $9.00 in the U.S. or Canada. Unsoljcited 52 CONTAINER CARS man uscripts or photogra phs should be Some authentic pieces of rolling stock from the steam era accompanied by return postage and 58 KIT-CONVERSION: BUILD TWO CONTAINER CARS Eastwood Publishing Company assumes no Usin g kits and ready-builts to make one-off replicas responsibility for the loss or damage of such material.
    [Show full text]
  • Rotary Hammer Drills ATEX
    Rotary Hammer Drills ATEX Pneumatic and hydraulic: powerful percussion drilling for concrete and masonry • SDS chuck • Safety clutch protects against overloading and jamming Air Model 2 2404 0010 • Hammer drill holes in concrete, brick and masonry SDS Plus up to 1" dia. • Rotary drilling mode for straight drilling of steel and wood • Open center hydraulic standard, closed center optional SDS Max – Modes of Operation 2" bit capacity for drilling concrete and masonry SDS Plus – Hammer and Drill 1" bit capacity for drilling concrete and masonry Drill concrete anchor holes, thru holes, Hammer with Rotation piping and mechanical openings for Ideal for concrete drilling construction and repair work. Switches to Rotation Only rotary drilling mode for steel and wood. For drilling steel and wood (not reversible) Air Model 2 2417 0010 SDS Max Second handle Hydraulic Model position 2 2406 0010 Hydraulic SDS Plus SAE #8 Model SAE #8 port for oil port 2 2418 0010 hydraulic hose connection SDS Max SDS Drill Bits Closed-Center Flow Control Valve Small Masonry Bits SDS Plus up to 1" dia. Optional accessory for use with closed-center Large Masonry Bits hydraulic power systems - adapts open-center tools SDS Max up to 2" dia. to closed-center. [Part No. 38632] Pneumatic Blows/ Drill Solid Bit Core Bit Twist Motor Hammer Drill Minute Speed Capacity Capacity Drill Power CFM @ Tool Dimensions Model No. (BPM) (RPM) (Concrete) (Concrete) (Wood) (HP) 90 PSI System (inches) Weight 2 1266 0010* 0-2000 0-950 1/2" dia. 1" dia. 3/8" dia. 0.75 21 1/2" Chuck 12x81/2 x4 7 2 2404 0010 0-3000 0-625 1" dia.
    [Show full text]
  • National Warehouse Retailer Tools - MODESTO - July 11Th
    10/01/21 02:25:32 National Warehouse Retailer Tools - MODESTO - July 11th Auction Opens: Fri, Jul 6 11:37am PT Auction Closes: Wed, Jul 11 6:30pm PT Lot Title Lot Title MW7000 DeWalt Jump Starter & Digital Air Compressor MW7030 Stanley Riveter MW7001 Husky Gravity Feed Spray Gun Kit MW7031 Stanley Box Cutter MW7002 Husky 8 in 1 Portable Jump Start with Hand MW7032 Husky Reactionless Ratchet H4120 Generator MW7033 Stud Finder MW7003 Ryobi Cordless Hand Vac MW7034 25' Measuring Tapes MW7004 Husky 60-Piece 1/4 in and 3/8 in. Drive MW7035 Speed Out Titanium Damaged Screw Extractor Universal Mechanics Tool Set MW7036 Husky 3/8 in. Compressor Shut-Off Kit MW7005 Anvil 2 Gal. Pancake Air Compressor and Accessory Kit MW7037 Stud Sensor HD35 MW7006 Husky 6-Piece 100 Position Double Ratcheting MW7038 25' Stanley Measuring Tape Wrench Set MW7039 35' and 16' Measuring Tape MW7007 Husky Impact Sockets MW7040 DeWalt Hammer MW7008 Universal Line for Trimming Grass MW7041 Utility Knives MW7009 Universal Line for Trimming Grass MW7042 25'and16' Measuring Tapes MW7010 Bosch Hole Saw MW7043 DeWalt Wood Chisel MW7011 HDX 14 in. Tile Cutter MW7044 Wiss Snipps MW7012 Tungsten Carbide Router Bits MW7045 Stanley Surform MW7013 Milwaukee Hole Saw MW7046 Rubbermaid 48" Wall Panel MW7014 Stanley 16' Tape Measure MW7047 Rubbermaid 48" Wall Panel MW7015 DeWalt Staple Gun MW7048 Rubbermaid 48" Wall Panel MW7016 Husky Siphon Feed Spray Gun MW7049 Rubbermaid 48" Wall Panel MW7017 Stanley Saw MW7050 Facet Supply Line MW7018 Universal Line for Trimming Grass MW7051 Ryobi
    [Show full text]
  • Weller Pyropen GB 08 04
    Weller Pyropens provide temperature variable soldering without the need for an electrical supply. Pyropens are lightweight and user friendly. A choice from 5 versions with a wide range of tips and nozzles makes them an ideal tool for maintenance and field service jobs in out of the way places. Convenient push Hot blow function, Powered by Butane gas, Pyropens offer solde- button piezo heat shrinking and ignition.* reflow soldering ring iron, hot gas blow and blowtorch and desoldering, options. They have a short heat up time and max. temperature are refuelled in seconds from a refill cylinder. 650°C A sight glass shows the level of gas in the *only Pyropen Piezo reservoir. Soldering iron Blow torch func- Heat is generated by gas passing over a cata- function, max. tion, max. tempe- temperature rature 1300°C lyst in the soldering tip or the hot air nozzle. 500°C Temperature variation is obtained by increa- sing respectively decreasing the gas flow. Pyropen WP 60 Kit An ergonomic Butane gas operated soldering iron with solder, hot blow and blow torch functions. Offers maxi- mum flexibility for use in many applications. It is tempera- ture variable within the range of 500°C to 1300°C depen- dant upon the function used. Refilling takes only a few seconds and it operates approx. 1 hour with one filling. An integral sight glass shows the level of the gas in the tank. Ignition of the gas requires an external source and the long life tips deliver rapid heat up. The hot blow nozzle supplies inert hot gas to prevent oxi- dation of non contact solder joints and is therefore suita- ble for use in solder paste applications, heat shrink and on vinyl chloride boards.
    [Show full text]
  • Headlok® and Spiderdrive® Are Registered Trademarks of OMG, Inc
    ® HeadLok PRODUCT DATA SPECIFICATIONS PRODUCT DESCRIPTION COATING The OMG HeadLok is a specialized, flat head OMG CR-10 corrosion resistant coating fastener engineered for a wide range of passes the corrosion requirements of FM panel applications including Structural Insu- Approval Standard 4470 and ETAG 006. lated Panels, Prefabricated Wall Panels, and APPLICATION USE Nailboard, and can also be used in wood, WITH structural concrete*, purlins*, corrugated Install the OMG HeadLok using a high torque, and structural steel substrates. low RPM screw gun. Bring underside of P the washer head flat to the surface. Do not FEATURES & BENEFITS overdrive. For steel substrates, proper point S • Three point and thread styles available style must be determined depending on the for fast installation. steel gauge thickness. W • Spade Point for use in in steel *For structural concrete, use the OMG SC HeadLok with spade points only. The fastener (18 - 22 ga.), structural concrete and DECK wood; must penetrate structural concrete decks a TYPES • Gimlet Point for use in dimensional minimum of 1-inch. Pre-drill using a 3/16-in. lumber; pilot hole at least 1/2-in. (13 mm) deeper than fastener embedment. • Drill Point for use in steel purlins PHYSICAL DATA** up to 3/16-in. thick. The 1/2-in. *For purlin attachment, use OMG HeadLok The data below is constant for each OMG HeadLok. with drill point only. drill point allows the fastener to be HEAD POINT STYLES SHANK drilled through the purlin before the *Prior to job-start, contact OMG to perform a .625" (15.87 mm) • Gimlet .190" (4.82 mm) threads engage.
    [Show full text]
  • ET0001 Ryobi Cordless String Trimmer
    ET Tool Image Number Ryobi Cordless String Trimmer ET0001 (Includes battery and charger) Ryobi Cordless Cultivator ET0002 (Includes battery and charger) Dremel Rotary Tool Kit (8220) (Includes 30 ET0003 accessories, battery, charger & carrying case) Ryobi Driving ET0004 Kit (68-piece) Page 1 ET Tool Image Number Ryobi Wood ET0005 Drilling Kit (11- piece) Ryobi Impact ET0006 Driving Kit (26- piece) Ryobi Black ET0007 Oxide Drill Kit (21-piece_ Electrician's Tool Set (22- ET0008 piece, includes bag) Page 2 ET Tool Image Number Steel Single ET0009 Painter's Pole (5 ft) Wood Extension Pole ET0010 with Metal Tip (4 ft) Light Bulb Changer Kit ET0011 with Attachments (11 ft) ET0012 Torch Kit Page 3 ET Tool Image Number ITEM NO ITEM NO LONGER ET0013 LONGER AVAILABLE AVAILABLE P3 Kill A Watt EZ ET0014 Electricity Usage Monitor P3 Kill A Watt EZ ET0015 Electricity Usage Monitor P3 Kill A Watt EZ ET0016 Electricity Usage Monitor Page 4 ET Tool Image Number Ryobi One+ 18V 4 1/2 in. Angle Grinder ET0017 (Includes bag, battery and charger) Ryobi One+ 18V Compact Drill/Driver Kit ET0018 (Includes bag, battery and charger) ITEM NO ITEM NO LONGER ET0019 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V Orbital Jigsaw (Includes bag, ET0020 battery, charger and 1 blade) Page 5 ET Tool Image Number Ryobi One+ 18V Belt Sander (Includes bag, ET0021 battery, charger and dust bag) Ryobi One+ 18V Drain Auger ET0022 (Includes bag, battery and charger) Ryobi One+ 18V Base with Multi- tool ET0023 Attachments (Includes bag, battery and charger) Ryobi One+ 18V Impact Driver ET0024 (Includes bag, battery and charger) Page 6 ET Tool Image Number ITEM NO ITEM NO LONGER ET0025 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V 6-1/2 in.
    [Show full text]
  • Catalog Ersa Soldering Irons, Soldering and Desoldering Stations, Solder Fume Extractions, Hybrid Rework Equipment and Accessori
    Catalog Ersa soldering irons, soldering and desoldering stations, solder fume extractions, hybrid rework equipment and accessories Quickfinder – the alphanumerical product index Order no. page Order no. page Order no. page Order no. page 00 – 03 0C 0ICV2000HP ................21 1E035VDA068 ................5 0003B ...................... 33 0CA10-001 .................. 28 0ICV403A ...................21 1HR200-HP0A67 ............. 24 0004G ...................... 33 0CA10-002 ................. 28 0ICV4000A ..................21 1HR2000000A67 ............. 24 0006G .................... 9, 33 0CA10-1002/04. 28 0ICV4000AI .................21 1IC1100A0CA67 ..............18 0008M ........... 17 – 18, 33, 37 0CA10-2002 ................ 28 0ICV4000AIC ................21 1IC1100A00A67 ..............18 0015BDH ....................6 0CA10-4001 ................ 28 0ICV4000AICXV .............21 1IC1100VCVA67 ..............18 0045BDG ....................6 0CA10-4002 ................ 28 0IRHP100A-03 .............. 30 1IC1100V0CA67 ..............18 0055JD ......................7 0CA10-4003 ................ 28 0IRHP100A-04 .............. 30 1IC1100V00A67 ..............18 0085JD ......................7 0CA10-4004 ................ 28 0IRHP200 ................... 30 1IC1100VXTA67 ..............18 0100CDJ ............. 18 – 19, 21 0CA10-4005 ................ 28 0IRHR100A-14 ............... 24 1IC1200A00A67 .............. 17 0120CDK ................... 17 0CA10-5001. 28 0IRHR100A. 24 1IC1300000A67 .............. 17 0130CDK ................... 17 0CA10-5002 ...............
    [Show full text]
  • Manhattan Style” of Construction in Particu- Lar
    K7QO Article 1 Manhattan Building Techniques ”Manhattan Style” of construction in particu- lar. It is my hope that this article will bring to by Chuck Adams, K7QO light some basic understanding of just what is in- This article is intended to give you an overview volved in building with this technique. To make of construction techniques for homebrewing and this article of interest for all ages and building then give significant detail on what is called the experiences, I ask for your patience while I start Manhattan Style of construction. At the begin- from the basics and work up to the more complex ning of each section is a brief paragraph outlining issues. the current topic. If you have a copy of the ARRL Handbook I recommend that you read through this material http://www.arrl.org/ for 1995 or later, please several times before building and experimenting read the first part of chapter 25 on construc- just to make sure that you have everything on tion techniques. You will note that Figures 25.10 hand before you get started. If you are like me, through 25.22 illustrate the most popular tech- you hate to start on something, be interrupted niques for building circuits. You can use these and then have to to go and find something that techniques for experimentation or for final com- you are missing or have overlooked. Plan ahead ponents of a rig or for a complete receiver, trans- and you will save a lot of valuable time. All mitter, or transceiver. These techniques consist the suggestions within this article are just that of: — suggestions.
    [Show full text]
  • Price List 2020
    VAUGHANS (HOPE WORKS) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications Unit J, Monarch Works, Balds Lane, Lye, Stourbridge, West Midlands, DY9 8TE Telephone: 01384 424232 Fax: 01384 893171 E-mail: [email protected] Website: www.anvils.co.uk PRICE LIST 2020 Approved Suppliers to British & Most Overseas Government & Aided Programmes Including World Bank United Nations VAUGHANS (HOPE WORKS) Tools & Equipment for Blacksmiths, Tinsmiths & Foundries – Forgings & Fabrications Unit J, Monarch Works, Balds Lane, Lye, Stourbridge, West Midlands, DY9 8TE Telephone: 01384 424232 Fax: 01384 893171 E-mail: [email protected] Website: www.anvils.co.uk TERMS & CONDITIONS PRICES: All prices shown are GBP £’s Sterling & ex-works POST & PACKAGING: Extra DELIVERY: Extra V A T: At Current Rate EXPORT: Packing and Delivery F O B Charged Extra ACCEPTANCE: All Orders Accepted Subject to Prices Ruling at Date of Despatch Unless Previously Agreed in Writing CANCELLATION: Orders Cancelled may be Subject to a Cancellation Charge RETURNS: A Handling Charge of 20% will be Charged (If Returns are Accepted) SPECIFICATIONS: The Right is Reserved to Add, Delete or Change the Specification of any Item at Any Time Without Prior Notice. All Dimensions are Approximate Due to the Hand Made Nature of Many of the Products. PAYMENT TERMS: Credit Account – Strictly 30 Days Nett Non Credit Accounts – Payment by Proforma or Mastercard, Visa, Switch, Delta, Solo. Paypal N B: Sizes Other Than Those in the Price List can be Manufactured – Prices on
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Repair Prices
    REPAIR PRICES MODEL RETAIL MVP DESCRIPTION NUMBER PRICE REPAIR PRICE BENCHTOP – MITER-TABLE SAWS CUT-OFF-TILE SAWS 3814 $199.00 $125.37 14" Benchtop Abrasive Cutoff Machine 3912 $201.96 12" Compound Miter Saw 4100 $333.54 10" Worksite Table Saw 4310 $354.96 10" Dual-Bevel Slide Miter Saw with Upfront Controls 4405 $295.80 10" Single-Bevel Slide Miter Saw with Upfront Controls 4412 $398.82 12" Dual-Bevel Slide Miter Saw with Upfront Controls 5312 $408.00 12" Dual-Bevel Slide Miter Saw with Upfront Controls 4100-09 $599.00 $377.37 10 In. Worksite Table Saw with Gravity-Rise™ Wheeled Stand 4212L $287.64 12" Dual-Bevel Compound Miter Saw with Upfront Controls & Laser Tracking 4410L $402.90 10" Dual-Bevel Slide Miter Saw with Upfront Controls & Laser Tracking 5412 $463.08 12" Dual-Bevel Slide Miter Saw with Upfront Controls CM10GD $599.00 $377.37 10 In. Dual-Bevel Glide Miter Saw CM12 $208.08 12" Single-Bevel Compound Miter Saw CM12SD $345.87 12" Dual-Bevel Slide Miter Saw CM8S $449.00 $282.87 8-1/2 In. Single-Bevel Slide Miter Saw GCM12SD $649.00 $408.87 12" Dual-Bevel Glide Miter Saw GTS1031 $379.00 $238.77 10 In. Portable Jobsite Table Saw TC10 $581.40 10" Wet Tile and Stone Saw CONCRETE – DEMOLITION-ROTARY HAMMERS • HAMMER DRILLS 11240 $256.02 1-9/16" SDS-max® Combination Hammer 11247 $245.82 1-9/16" Spline Combination Hammer 11248 $312.12 1-9/16" Spline Combination Hammer 11304 $887.00 Brute™ Breaker Hammer 11387 $314.16 Round Hex Demolition Hammer 11388 $314.16 SDS-max® Demolition Hammer 1194AVSR $75.11 1/2" Dual Torque Hammer Drill
    [Show full text]