DOCSLIB.ORG

Stich- Und Säbelsägeblätter

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Stich- Und Säbelsägeblätter Stich- und Säbelsägeblätter Abrasiv Bau Holz Platte Alu Stahl Plast 02/2016 | www.stehle-int.com Technische Informationen Materialsorte HCS High Carbon Steel - Kohlenstoff stahl für den Einsatz in weicheren Materialien wie Weichholz, Holzfaserplatten, weichen Kunststoff en. BiM Bimetall, eine hochfl exible Verbindung aus HSS und HCS für höchste Ansprüche. Speziell geeignet für den Einsatz in Hartholz, abrasiven Holzwerkstoff en, harten Kunststoff en, sowie härteren Materialien wie Nichteisenmetall und Metall. HSS Vollgehärteter Hochleistungs-Schnellschnittstahl für den Einsatz in härteren Materialien wie Metall, Aluminium und Buntmetall. Farbcodierung und Anwendung BAU Baustellenhölzer, Schalungsplatten, Holz mit Nägeln / Zementverschmutztes Holz und Platten. HOLZ Massivhölzer und Holzwerkstoff e, Hart- und Weichholz. PLATTE Spanplatten, Vollholz-, Tischlerplatten u. Sperrholz, furnierte u. papierbeschichtete Platten, Abrasive Verbundplatten. ALUMINIUM Profi le, Bleche und NE-Verbundmaterialien, Aluminium und NE-Metalle. STAHL Blech, NE-Metallen, Gusseisen, Edelstahlbleche, Verbundmaterial mit Edelstahlbelag / Stahlverstärkung. Symbole Anzahl Zähne pro Zoll (TPI) + Zahnteilung beschichtete Möbelplatten Zahnteilung geschränkt geschliff en furnierte und laminierte Platten Zahnteilung mit Achswinkel geschliff en Konstruktionsholz Gerader Schnitt, fein Paletten Rundschnitt, fein Grobholz, nagelfrei Gerader Schnitt, grob Lebendes Holz, ausasten Rundschnitt, grob Ausschnitt Holzwand speziell für Tauchschnitt Kunststoff e, Rohre, Profi le Material, dünn und dick GFK/Epoxy Massivholz Bleche Weichholz, Tischlerplatten Lochbleche Konstruktionsholz Profi le, off en Bauholz mit Nägeln Sandwichmaterial Sonstige Informationen L1 = Gesamtlänge T L2 = Schnittlänge B = Schnittbreite L2 T = Zahnteilung per Inch (TPI) L1 Verpackt als Set zu 5 Stück (VE=5) Preis pro Verpackung Alle Sägeblätter haben eine Anti-Rost Beschichtung Stichsägeblätter HCS Stichsägeblätter für Holz und holzgebundene Plattenmaterialien Einsetzbar auf: AEG, Atlas Copco, Black+Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Makita, Metabo, Skil, ... Bestellnummer Produkteigenschaften L1 L2 B T Anwendung Vergleichbar [mm] [mm] [mm] [TPI] mit 83 56 1,55 13 AEG 274650 68119201 CURVE Bosch T119BO HCS CUT Makita A85709 Zähne gewellt, gefräst, Teilung 1,9 mm (grob).(b) WeichholzW (2 - 15 mm), Sperrholz, Metabo 23646 Span-, Tischler-, Faserplatten, speziell für Kurvenschnitte. 83 58 1,10 18 Bosch T101AO 68101101 CLEAN HCS Festool 486564 CUT Makita A80400 Spitzverzahnt mit Freiwinkel, geschliff en, Teilung 1,4 mm (fein). Weichholz, Sperrholz, Metabo 23651 beschichtete Platten (1,5 - 15 mm), speziell für Kurvenschnitte. 100 74 1,35 10 Bosch T101B 68101200 CLEAN Festool 486548 HCS CUT Makita A85634 Mit Freiwinkel, geschliff en, Teilung 2,5 mm (Clean Cut). Weichholz, Span-, Tischler-, Metabo 23634 Faserplatten (3 - 30 mm), Kunststoff e/Epoxy (ø<30 mm). 100 74 1,35 10 Bosch T101BR 68101203 PUSH HCS Festool 486548 CUT Makita A85715 Mit Freiwinkel, geschliff en, Teilung 2,5 mm (Push Cut). Weichholz, Span-, Tischler-, Metabo 23650 Faserplatten (3 - 30 mm), beschichtete Platten, saubere Oberfl ächen. 100 74 1,80 8 Bosch T111C FAST 68111302 Festool 483379 HCS CUT Makita A85656 Zähne geschränkt, gefräst, Teilung 3,2 mm (grob).( ) Weichholz (4 - 50 mm), Span-, Metabo 23632 Tischler-, Faserplatten, schneller Schnitt. 100 74 2,20 6 AEG 213116 68144401 PRECISION HCS Bosch T144DP CUT Makita A85684 Zähne geschränkt, geschliff en, Teilung 4,2 mm. Weichhoz, Span-, Tischler-, Faserplatten Metabo 23633 (5 - 50 mm), Türen, Küchenarbeitsplatten(<50 mm), winkelgenauer Schnitt. 100 74 1,65 5-6 Bosch T144D 68144400 FAST Festool 486546 HCS CUT Makita A85684 Zähne geschränkt, geschliff en, Teilung 4,64 6 mm (Vario(V Zahn). Weicholz (5 - 50 mm), Metabo 23633 Span-, Tischler-, Faserplatten, schneller Zuschnitt. 100 74 1,65 5-6 Bosch T244D 68244400 FAST Festool 486563 HCS CUT Makita A85690 Zähne geschränkt, geschliff en, Teilung 4,66 mm (Vario(V Zahn). Weicholz (5 - 50 mm), Metabo 23649 Span-, Tischler-, Faserplatten, speziell für Kurvenschnitt. 100 74 1,35 5-6 AEG 274351 68101400 CLEAN HCS Bosch T101D CUT Makita A85640 Mit Freiwinkel, geschliff en, Zahnteilung 4,6 mm (Vario Zahn), Weichholz, Span-, Metabo 23635 Tischler-, Faserplatten (10 - 45 mm). 117 91 1,35 8-13 Bosch T234X WITH 68234900 GROUND HCS Festool CUTTING Makita P71308 Mit Freiwinkel, geschliff en, Zahnteilung 2,44(V mm (Vario Zahn), Weichholz (3 - 65 mm), Span-, Tischler-, Faserplatten. Metabo 117 91 1,35 8 Bosch T301CD 68301301 CLEAN HCS Festool CUT Makita A85628 Mit Freiwinkel, geschliff en, Zahnteilung 3,2 mm (Clean( cut), Weichholz, Span-, Tischler-, Faserplatten (10 - 65 mm). Metabo 23654 152 126 1,65 6 Bosch T344D 68344400 FAST HCS Festool CUT Makita A86309 Zähne geschränkt, geschliff en, Teilung 4,2 mm (grob). Dickes Bauholz, Weichholz (5 - 1000 mm), Span-, Tischler-, Faserplatten. Metabo 23980 ■ Holz ■ Bau ■ Platte ■ Alu ■ Stahl Preis pro Verpackung 5 Stück (VA=5) Stichsägeblätter BiM Stichsägeblätter für den Bau **Nagelfest** Einsetbar auf: AEG, Atlas Copco, Black+Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Makita, Metabo, Skil, ... Bestellnummer Produkteigenschaften L1 L2 B T Anwendung Vergleichbar [mm] [mm] [mm] [TPI] mit Bosch T345XF WITH 132 106 1,80 5-10 68345901 GROUND BiM Festool CUTTING Makita B06482 Zähne geschränkt, gefräst,Teilung 3,4 mm (Vario Zahn). Bauholz mit Nägeln lackiert Metabo (<65 mm), Holzwerkstoff e, Kunstoff e, Bleche, Rohre/Profi le, inkl. Alu (Q3 - 10 mm). BiM Stichsägeblätter für Platte **Trespa** Einsetzbar auf: AEG, Atlas Copco, Black+Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Makita, Metabo, Skil, … Bestellnummer Produkteigenschaften L1 L2 B T Anwendung Vergleichbar [mm] [mm] [mm] [TPI] mit 100 74 1,05 15 Bosch T101AIF 68101100 TRESPA BiM CUT Festool Makita P31566 Mit Freiwinkel, spitzverzahnt, geschliff en, Zahnteilung 1,7 mm (fein), Hartholz, Laminate, beschichtete Platten/HPL (2 - 30 mm), kein Ausriss. Metabo 23948 100 74 1,05 10 Bosch T101BF 68101201 CLEAN CUT BiM Festool LONG LIFE Makita P31594 Mit Freiwinkel, geschliff en, Teilung 2,5 mm (Longlife). Hartholz, Laminate, beschichtete Platten/HPL (3 - 30 mm), sauberer Schnitt. Metabo 23975 HSS Stichsägeblätter für Aluminium Einsetzbar auf: AEG, Atlas Copco, Black+Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Makita, Metabo, Skil, ... Bestellnummer Produkteigenschaften L1 L2 B T Anwendung Vergleichbar [mm] [mm] [mm] [TPI] mit 100 74 1,55 8 Bosch T127D 68127400 FOR ALU HSS Festool 486556 CUTTING Makita P47226 Zähne geschränkt, gefräst, Teilung 3,2 (ALU). Dünne bis starke Bleche (3 - 15 mm), Rohre + Profi le (Q<30 mm ). Metabo 23971 BiM Stichsägen für Stahl / Edelstahl Einsetzbar auf: AEG, Atlas Copco, Black+Decker, Bosch, DeWalt, Elu, Festool, Hitachi, Makita, Metabo, Skil, ... Bestellnummer Produkteigenschaften L1 L2 B T Anwendung Vergleichbar [mm] [mm] [mm] [TPI] mit 92 67 1,40 17- Bosch T118AF 68118101 FLEXIBLE BiM 23 Festool 486556 LONG LIFE Makita P47226 Zähne gewellt, gefräst, Teilung 1,3 mm (Vario Zahn). Dünne Bleche, Lochbleche (1 - 3 mm). Metabo 23971 92 67 1,40 11- Bosch T118BF 68118201 FLEXIBLE 14 BiM Festool 486557 LONG LIFE Makita P47232 Zähne gewellt, gefräst, Teilung 2,00 mm (Vario Zahn). Mittelstarke Bleche, Metabo 23973 Lochbleche (2,5 - 6 mm). Bosch T123XF WITH 100 74 1,45 10- 68123901 GROUND BiM 22 Festool CUTTING Makita B06476 Zähne geschränkt, gefräst, Teilung 1,6 mm (Vario Zahn). Dünne bis starke Bleche Metabo (1,5 - 10 mm), Rohre + Profi le, inkl. Alu (Q<30 mm). 132 106 1,40 23 Bosch T318AF 68318101 FLEXIBLE BiM Festool 486558 LONG LIFE Makita P47204 Zähne gewellt, gefräst, Teilung 1,1 mm (Flexibel). Dünne Bleche, Lochbleche (1 - 3 mm), Sandwichmaterialien(<65 mm), Rohre + off ene Profi le, inkl. Alu Metabo 23978 (Q<65 mm), GFK/ Epoxy (<65 mm). ■ Holz ■ Bau ■ Platte ■ Alu ■ Stahl Preis pro Verpackung 5 Stück (VA=5) Säbelsägen HCS Säbelsägeblätter für holzgebundene Plattenmaterialien Einsetzbar auf: AEG, Black+Decker, Bosch, DeWalt, Flex, Hilti, Hitachi, Makita, Metabo, Milwaukee, Porter Cable, Skil, ... Bestellnummer Produkteigenschaften L1 L2 B T Anwendung Vergleichbar [mm] [mm] [mm] [TPI] mit 153 131 1,65 6 SHARP Bosch S644D 68064440 CLEAN HCS CUT Fein 635030 Zähne geschränkt, geschliffhliff en, TeilungT 4,2 mm. Konstruktionsholz (<100 mm), Makita P05022 Metabo 31470 Holzwand(<100 mm), Platten: Span, MDF(6 - 60 mm), Sperrholz, Kunstoff (<100 mm), < 100 mm sepziell für Tauschnitt. 203 181 1,65 6-10 Bosch S2345X 68234590 CLEAN HCS Festool CUT Makita Zähne geschränkt, geschliff en, Teilung 3,2 mm (Vario). Konstruktionsholz (<150 mm), Platten: Span, MDF(6 - 60 mm), Sperrholz, Kunstoff (<150 mm),Holzwand (<150 mm). Metabo Müheloser feiner Schnitt. 240 218 2,25 5 AEG 323803 68153190 HCS FAST Bosch S1531L CUT Makita P47117 Zähne geschränkt, geschliffhliff en. Teilung T 5,1 mm. Grobholz, nagelfrei(<190 mm), lebendes Holz ausasten (Q<190 mm), Brennholz(Q<190 mm). Metabo 31488 305 283 1,65 6 SHARP AEG 323802 68134440 HCS CLEAN Bosch S1344D CUT Makita P05016 Zähne geschränkt, geschliffhliff en, Teilung T i 4,2 mm. Konstruktionsholz u. Holzwand <100 mm), Metabo 31472 Platten: Span, MDF (6 - 60 mm), Sperrholz, Kunstoff (<100 mm), speziell für Tauchschnitte. < 250mm BiM Säbelsägeblätter für den Bau **Nagelfest** Einsetzbar auf: AEG, Black+Decker, Bosch, DeWalt, Flex, Hilti, Hitachi, Makita, Metabo, Milwaukee, Porter Cable, Skil, ... Bestellnummer Produkteigenschaften L1 L2 B T Anwendung Vergleichbar [mm] [mm] [mm] [TPI] mit 203 181 1,80 6-10 6-10TPI Bosch S3456XF 68345691 BiM FAST
Load more

Recommended publications
  • Stanley Black and Decker Techtronic Industries Co Ltd (TTI) Chevron
    Who Owns What? Andrew Davis May, 2019 This is a redacted version of an article II found on protoolreviews.com. I remember growing up when General Motors offered different brands at different price points (until they all the brands started to overlap before GM collapsed) – Cadillac at the top end, followed by Oldsmobile, Buick, Pontiac, and Chevy. We have a similar situation in woodworking tools (also in kitchen appliances) except that in the case of tools, the multi-brand company is more often a case of acquisitions rather than organic development. Anyway, for those readers interested in the business side of tools, this column, which is a departure from my usual thread, may be of interest. Stanley Black and Decker Stanley Black & Decker (SBD) turned heads when it bought Craftsman Tools in 2017 after Sears closed 235 stores in 2015. Dating back to 1843 with a man named Frederick Stanley, the company merged in 2010 with Black and Decker. As of 2017, the company maintains a $7.5 billion business in tools & storage alone. SBD brands include: DeWalt Stanley Black + Decker Bostitch Craftsman Vidmar Mac Tools Irwin Lenox Proto Porter-Cable Powers Fasteners Lista Sidchrome Emglo USAG Techtronic Industries Co Ltd (TTI) TTI owns Milwaukee Tool and a host of other power tool companies. It also licenses the RIDGID and RYOBI names for cordless power tools (Emerson actually owns RIDGID and makes the red tools). Founded in 1985 in Hong Kong, TTI sells tools all over the world and employs over 22,000 people. TTI had worldwide annual sales of over US$6 billion in 2017.
    [Show full text]
  • Attaching the Leigh E-Bush to the Router
    69 D4R Pro - Appendix I Attaching the Leigh e-Bush to the Router The correct guidebush is the vital link between the router and your Leigh Jig. It precisely steers the router. Where possible, always use the Leigh system to ensure correct bush length and precise diameter for accurate results. Leigh offers the adaptors below to fit guidebushes to over one hundred router models new and old, including Porter Cable, Black & Decker, and DeWalt. Many other makes like Bosch, Fein, Festool, Milwaukee etc., include or offer base adaptors. See a list of routers in the Guide Bushing and Adaptor Selection Chart on the next page. Leigh Guide Bushing and Adaptor System e7 711C e10 716C eBush Mounting Variations 721 RA1126 RA1129 Set of two Bosch Adaptors: RA1126 and RA1100 704R RA1100 eBush with eBushes fit many Adaptors 702 & 702R routers directly 702 705R 702R 706R 703 710 eBush with eBush with Adaptor 703 Adaptor 710 Nut for e-Bushes and C Guide Bushings 70 Appendix I D4R Pro User Guide ATTACHING THE LEIGH E-BUSH TO THE ROUTER Guide Bushing and Adaptor Selection Leigh dovetail jigs require a router fitted with a guide bushing. An adaptor may be required to fit the bushing to the router. Visit Leightools.com for a complete list of routers. 1 ROUTER 2 ROUTER 3 ROUTER 4 7/16" OD 5 5/8" OD DIRECTIONS MAKER MODEL ADAPTOR BUSHING ◆ BUSHING ▲ OFE 710 in plunge base Not Required e7 or 711C 716C A. Locate name of router maker in AEG OFSE 2000 703 e7 or 711C 716C Column 1.
    [Show full text]
  • THE TOOL SHED CELEBRATES 40 Years of Belng “WHERE THE
    FEATURED FEATURED DISTR DISTR I I BUTOR BUTOR by Tom by Tom by Tom Hammel THE TOOL SHED Hammel THE TOOL SHED CELEBRATES 40 years of being “where THE PROS Tool up” Toni, have intertwined their marriage at the age of 18. Howard Martin is and business successfully despite an avid woodworker who advises all the pitfalls that can occur when customers on all types of woodwork- working with a spouse. Nils jokingly ing questions. Don Frank’s experi- says that he’s fired Toni 500 times, ence as a mechanic makes him but then adds that she has quit The Tool Shed’s automotive expert. probably 1,000 times. Warehouse manager Doug Carver rounds out the core team. How does one work side by side with your spouse and keep from When Nils launched the busi- or 40 years, The Tool Shed ruining the marriage or the business? ness, The Tool Shed sold mechanics in Greenville, South Caro- It helps to have separate offices as tools and garage equipment. The lina, has built its business well as different job functions. Toni Tool Shed still features mechanic’s and reputation around the handles everything from payroll to hand tools and shop equipment, but slogan, “Where the pros accounts payable and receivable and woodworking machinery and power www.ContractorSupplyMagazine.com www.ContractorSupplyMagazine.com tool up.” This self-de- anything to do with money. Toni also tools dominate the showroom today. www.ContractorSupplyMagazine.com Fscribed retail tool store serves local manages the company’s health care This evolution of the product mix was contractors with power tools, acces- and benefit packages.
    [Show full text]
  • Savklinger – Brugerguide
    SAVKLINGER – BRUGERGUIDE TRÆ – BATTERISAVE (Blisterpakninger) Til længdeskæring og afkortning af træ og lignende materialer. Varenr. Størrelse Til sav 34703152 136x1,5/1,0x20 Z18 W Makita 18v, Dewalt 18v (Ny) 34703412 165x1,7/1,1x20 Z24 W Makita 18v, Dewalt 18v (Ny) Skaffevare 184x1,7/1,1x20 Z24 W Dewalt 36v Til afkortning og fine snit med flot finish af træ og lignende materialer. Varenr. Størrelse Til sav 34703155 136x1,5/1,0x20 Z36 W Makita 18v, Dewalt 18v (Ny) 34703419 165x1,7/1,1x20 Z36 W Makita 18v, Dewalt 18v (Ny) Skaffevare 165x1,7/1,1x30 Z36 W Hitachi TRÆ – HÅNDRUNDSAVE / DYKSAVE / KAPSAVE Til længdeskæring af træ og lignende materialer. Varenr. Størrelse Til sav Skaffevare 160x2,2x20 Z12 W Festool dyksav, Hitachi, Makita, Metabo Skaffevare 190x2,6x30 Z12 W Makita, Hitachi, Festool, Dewalt, Bosch, AEG, Elu, Ryobi 34704065 216x2,8x30 Z24 W NEG Dewalt, Elu, Hitachi Skaffevare 210x2,8x30 Z24 W Festool, AEG, B&D, Bosch, Elu, Hitachi, Skil 34704565 250x2,8x30 Z24 WB Dewalt, Festool, Elu, Metabo 34700566 270x2,8x30 Z28 W Makita Til længdeskæring og afkortning af træ og lignende materialer. Varenr. Størrelse Til sav Skaffevare 120x1,8x20 Z18 W Mafell Skaffevare 130x2,4x20 Z20 W AEG, Atlas 34703235 150x2,4x20 Z24 W AEG, Dewalt, Elu, Festool, Hitachi, Makita, Ryobi, Skil Skaffevare 160x2,6x16 Z24 W Black & Decker, Bosch, Ryobi, Skil 34703335 160x2,2x20 Z24 W Festool dyksav, Hitachi, Makita, Metabo 34703425 165x2,6x20 Z24 W Dewalt, Makita, Metabo 34703605 184x2,6x16 Z24 W Skil, Black & Decker, Dewalt 34703705 190x2,6x16 Z24 W Skil, Bosch 34703735 190x2,6x20 Z24 W Makita, Metabo 34703765 190x2,6x30 Z24 W Makita, Hitachi, Festool, Dewalt, Bosch, AEG, Elu, Ryobi 34703969 210x2,8x30 Z36 W Festool, AEG, B&D, Bosch, Elu, Hitachi, Skil 34704072 216x2,8x30 Z48 W NEG Dewalt, Elu, Hitachi 34704269 230x2,8x30 Z36 W AEG, Bosch, Festool, Mafell, Scheer Skaffevare 270x2,8x30 Z42 W Makita Til afkortning og fine snit med flot finish i træ og lignende materialer.
    [Show full text]
  • Is This the New Dewalt
    Is This The 'New' Dewalt? A review of the new 18v cordless drills The power tool market is a fickle beast with some companies flying for years at a time then crashing and burning in spectacular fashion. When I entered the retail power tool market over 15 years ago Dewalt was the company to beat. A marketing powerhouse helped to keep the brand foremost in the mind of the trade, and for a number if years it nearly became an iconic brand with fathers extolling its virtues to their sons and tradesmen plying it's benefits to their apprentices. Then it all changed... Following some bad corporate decisions involving poor drill designs and battery technology Dewalt seemed to loose its way. In the retail sector, the return rates of Dewalt steadily increased as did the customer angst. For those of us at the pointy end behind the retail counter, faced with increasing customer resentment and needing to protect the store profitability we began to focus attention away from Dewalt and toward other brands such as Makita, Bosch, and Hitachi. Those of you reading this article, who have worked in the retail tool market will no doubt agree that when you've had to deal with a lot of customer complaints about a particular brand, you very quickly work to find alternatives to avoid customer related stress. So for a number of years Dewalt seemed to be relegated to the back blocks of the power tool world. New lithium models from Makita and Milwaukee power tools, the new kids on the block, proving to be formidable competition to the once mighty brand.
    [Show full text]
  • Mounting the Router3
    MOUNTING THE ROUTER3 FMT PRO CHAPTER 2 Mounting the Router Fence Rod Mounting Screw Mounting Foreword The threaded sub-base mounting holes on many routers are not strong enough for the stresses produced when routing joints with the FMT Pro, so Leigh developed the Universal Fence Rod Mounting System. The Leigh FMT Pro Sub-Base provides great attachment strength and lateral anchoring. Depending on your router model, fitting the Sub-Base to your router may take up to an hour…the first time only. Once fitted, the router can be removed and reattached in about a minute. Mounting the Sub-Base correctly is critical to the accuracy of the jig, so take your time and get it right the first time. Here’s how... Fence Rod Mounting m The FMT Pro must only be used with a plunge router. Never, ever use a fixed base router! Right Left 7 Rear Rear 6 6 9 10 9 12 1 2 3 3 21 4 5 4 5 11 11 7 7 10 9 1 2 3 10 3 21 9 5 12 4 Left 8 6 2-1 The Leigh FMT Pro Sub-Base Place your router, the Front 6 Right 7 Front FMT Pro Sub-Base and all the mounting parts on a clear bench. From the Sub-Base diagram and chart on this page, find the make ROUTER MAKE HOLES NOTES LR RR LF RF and model of your router. AEG OFS 50 2 BOSCH 1450, 2 1611EVS,1613EVS,1617EVS BOSCH 1619EVS 1 *1 1 *File notch in U-Post if req’d to avoid Turret BOSCH MRP23EVS 1 CRAFTSMAN 2 DEWALT 616/618 3 DEWALT 621 1 3 1 3 DEWALT 625 2 Requires 1/16" packing shim.
    [Show full text]
  • Sortimentsempfehlungen Heimwerker Dezember 2020
    Buderus Vaillant Homematic IP Stiebel Eltron Kermi Grundfos Danfoss Wilo Viessmann Bosch Clage Heimeier tado° Oventrop Godin Mitsubishi Electric Reflex BWT GROHE Honeywell AEG Wolf Grünbeck Atmos Rademacher Judo Geberit Elgato Keuco Eberle GROHE Geberit Villeroy & Boch Blanco Hansgrohe Franke Duravit Laufen Ideal Standard Schulte Respekta SFA Kaldewei Viega Schuette Kludi Hansa Tece Hoesch Schock Ottofond Jung Maico Eurodomo Helios Home Deluxe Haro Quooker Alape Steinberg Steinel Arlo Ring Homematic IP ABUS reolink HomeMatic Foscam Netgear Instar Eufy TP-Link Hikvision Somfy blink Nest Switel Netatmo Xiaomi Logitech Busch-Jaeger Bosch Z-Wave.Me Edimax Jelly Comb Aqara Fibaro Shelly eQ-3 HiKam Burg Wächter ABUS Ei Electronics Hekatron Smartwares Fibaro Brennenstuhl Gira Bosch Pyrexx Somfy Master Lock FireAngel Homematic IP Jung eQ-3 Xsense TP-Link Elro Nest Siedle DELTA DORE Olympia Nuki Rademacher Telekom Blaupunkt First Alert Gigaset Unitec ABUS Velux Gira Siedle Rademacher Ring Burg Wächter Bticino Grothe Tesa Somfy DoorBird Smartwares Ritto Nuki GEZE Busch-Jaeger Bayer Philips Homematic IP Legrand BKS Yale Westag-Getalit Panto Honeywell Superrollo Schellenberg Eufy Hoppe Alpina Rasch Caparol Erismann Wagner Remmers Osmo Erfurt Schöner Wohnen A.S. Creation Keim PUFAS Baufix OWATROL Marburg Tapeten Bosch Herbol Nike Einhell Sikkens CLOU Hammerite PaperMoon FrogTape Consolan Fertan Xyladecor Knauf STIER PCI Intex Karibu Weka Bestway Home Deluxe Dewello Woodfeeling Harvia Wolff Steinbach Dolphin Gre EOS Exit Bayrol Interline Water Tech
    [Show full text]
  • BRANCHENANALYSE ELEKTROWERKZEUGE Entwicklungstrends Und Herausforderungen
    STUDY Nr. 343 · November 2016 BRANCHENANALYSE ELEKTROWERKZEUGE Entwicklungstrends und Herausforderungen Jürgen Dispan Diese Study erscheint als 343. Titel der Reihe Study der Hans-Böckler- Stiftung. Die Reihe Study führt mit fortlaufender Zählung die Buchreihe „edition Hans-Böckler-Stiftung“ in elektronischer Form weiter. STUDY Nr. 343 · November 2016 BRANCHENANALYSE ELEKTROWERKZEUGE Entwicklungstrends und Herausforderungen Jürgen Dispan Autor: Dr. Jürgen Dispan ist wissenschaftlicher Mitarbeiter und Projektleiter beim IMU Institut in Stuttgart. Seine inhaltlichen Schwerpunkte liegen in analyti- schen und konzeptionellen Arbeiten rund um die Bereiche Branche, Cluster, Strukturwandel sowie Innovation, Mitbestimmung, Partizipation in Betrieb und Region. Studien der letzten Jahre befassen sich mit Regionalentwick- lung und verschiedenen Branchen des Verarbeitenden Gewerbes (wie Auto- motive, Maschinenbau, Kunststoffverarbeitung), mit Industriepolitik und Unternehmensstrategien sowie mit Wirkungsanalysen von Zukunftsfeldern wie Elektromobilität und Umwelttechnologien. © 2016 by Hans-Böckler-Stiftung Hans-Böckler-Straße 39, 40476 Düsseldorf www.boeckler.de ISBN: 978-3-86593-251-8 Satz: DOPPELPUNKT, Stuttgart Alle Rechte vorbehalten. Dieses Werk einschließlich aller seiner Teile ist urheberrechtlich geschützt. INHALT 1 Einleitung 9 2 Entwicklung und Strukturen der Branche 17 2.1 Unternehmensstruktur in Deutschland 17 2.2 Grunddaten zur Elektrowerkzeug-Branche 23 2.3 Anzahl der Betriebe und Größenklassen 24 2.4 Produktions- und Umsatzentwicklung
    [Show full text]
  • Universal Sub-Base
    Code 718650 Original Instructions Universal Sub-Base • Circular sub-base offers maximum versatility. • Precision machined from aluminium with a low friction surface coating • Designed to accept standard Axminster or Trend style guide bushes. • Suitable for a wide range of routers; including Bosch, Makita, Elu, DeWalt, Festool, Trend, Ryobi, UJK Fixing Kit for Router & Jigs Optional Precision Steel Hitachi etc. Code 508626 Guide Bushes • Fixing kit is included to cover avariety of thread types. AT: 04/08/2020 • 176mm diameter x 7mm thick. BOOK VERSION: 04 Introduction Some routers can be difficult to match up with suitable accept standard Axminster or Trend style guide bushes guide bushes and a universal sub base can be the only and holes for these are drilled with an M4 thread. It solution. A round base can be preferable in many is also designed for mounting to a very wide range of circumstances too. The UJK Universal Sub Base is different routers, including Bosch, Makita, Elu, Dewalt, precision machined from aluminium and fitted with Festool, Trend, Ryobi and Hitachi models to name a a low friction surface for ease of use. It is designed to few. Dimentions: 176mm diameter x 7mm thickness. Router Chart 1 Router Hole Model BOSCH GOF1600,1700ACE POF52, 1 Fx2 400,500A,600ACE 3 Fx2 POF800ACE.GOF900A <2 003 4 Gx3 GOF1300ACE,900A>2003 5 Gx3 GMF1400 0 Ix4 GMF1600 CE 19 Ix3 2 CMT CMT1E,CMT2E 1 Fx2 DEWALT DW613,614,615,620,621, 1 Fx2 DW625EK.629 1 Fx2 DRAPER R1900V 2 Fx3 PT1200V 1 Fx3 ELU OF97(E),MOF177(E),131,98, 1 Fx2 MOF77,96(E) MK2,69’ 1 Fx2
    [Show full text]
  • Notification Letter & List
    January 10, 2019 NOTICE OF PROPOSED AMENDMENTS TO THE NATIONAL MOTOR FREIGHT CLASSIFICATION® «First_Name» «Last_Name» «Title» «Company» «Address_1» «Address_2» «City» «State» «Zip» «Country» Re: Reclassification of Handheld or Hand-Supported Power Tools, NOI; NMFC Item 186590 – Docket 2019-1, Subject 9 The National Motor Freight Classification® (NMFC®) is a voluntary standard that provides a comparison of products moving via motor carrier in interstate, intrastate and foreign commerce. Classes are assigned based on an evaluation of the product’s transportation characteristics. On Tuesday, February 12, 2019, the Commodity Classification Standards Board (CCSB) will conduct a public meeting to consider proposals for amending the NMFC, as listed in CCSB Docket 2019-1. Our records indicate that you might have an interest in the above-referenced proposal, which will be considered at the meeting. Accordingly, we urge you to review the proposal. The docket as well as facts, data and evidence of record relating to the proposal are available to you without charge at www.nmfta.org. Go to “NMFC” on the navigation bar, click on “Public Docket Files” and then click on “2019-1.” If you have an interest in the proposal, you are invited to attend the meeting on February 12, 2019 and/or communicate that interest in writing by mail, email or fax prior to the meeting. As an Interested Person, you will be sent the disposition of the proposal. If you wish to become a Party of Record to the proposal, you are likewise invited to attend the meeting; however, you must communicate your interest in writing by mail, email or fax, and submit pertinent information relating to the transportation characteristics—density, handling, stowability and liability—of the product(s) involved, or relevant to packaging materials or methods in connection with proposed packaging amendments, and it must be received by 5:00 pm Eastern Time, February 1, 2019.
    [Show full text]
  • Plunge-Cutting Circular Saws
    Plunge-Cutting Circular Saws by David Frane These portable, versatile t the beginning of my career as a finish carpenter, A there were two common ways to accurately cut finish tools are ideal for breaking sheet goods in the field: with a full-size table saw or with a circular saw and a straightedge. The table saw was fine for down sheet goods on site ripping but not much good for crosscutting; the circular saw ripped and crosscut equally well, but the process was slow because you had to clamp a guide to the stock for every cut. Neither tool had dust collection, and both chipped and scratched delicate material. When Festool introduced the plunge-cutting saw, it sud- denly became a whole lot easier to make accurate cuts in ex- pensive sheet goods on site. In case you’re not familiar with this tool, it’s a circular saw designed to ride on an aluminum guide rail and intended for use with a dust-collecting vac- uum. Plunge-cutting saws make it possible to produce APRIL 2009 l JLC l 45 Plunge-Cutting Guide Rails Circular Saws Rails, or tracks, are available in several lengths and can be joined with connecting hardware to make them longer. straight, chip-free cuts in a variety of fin- ish materials. Flooring installers use them TTwTwo adjustable to cut borders and inlays into hardwood camcams allow the fit and laminate flooring, and countertop ttoo beb fine-tuned. fabricators use them to cut solid surfacing material without sending clouds of dust into the air.
    [Show full text]
  • One-Handed Table Clamps EZR-SET
    One-handed table clamps EZR-SET BESSEY®’s EZR-SET, one-handed clamp innovation, is designed with purpose and possibilities. Created to work with track saw guides (slots/grooves, 12 x 6.5 mm to 12 x 8mm from Festool, Protool, Metabo, Makita, Hitachi/Hikoki and DeWalt), this clamp does so much more! 2 No tools are required to quickly transform and adapt to its numerous applications including a unique step-over solution. 1 User friendly technology 3 The easy to use release mechanism can quickly convert from clamping to spreading without tools simply by using a push button 1 release. 2 Robust construction Ergonomically shaped composite handle with trigger lever, allows a powerful grip. Enclosed plastic housing is protected from dust and chips. Profiled rail for extra stability. 3 Soft Touch pads with pattern Cross prism design integrated in the plastic caps optimize material protection and allow fastening of round, pointed and angular pieces. 3 One-handed table clamps, EZR-SET One handed clamping designed for fastening to track tables. Use with adaptor for step over capabilities. Transition from clamping and spreading made easy with quick push of a dial. Contains 2 pieces. Clamping Throat Clamping Approx. Capacity Depth Force Spreading Weight 3 3 EZR-SET 6" 2 ⁄8" 100 lbs 4 ⁄4" - 12" 1.37 lbs Step-over clamping flexibility Use the unique adaptor (2 Inch) to enable step-over work by inserting it into the upper or lower sections. Converts to a spreader No tools required to turn this clamp into a spreader. Click of a dial to remove head and use with or without adaptor.
    [Show full text]