DOCSLIB.ORG

Notification Letter & List

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Notification Letter & List January 10, 2019 NOTICE OF PROPOSED AMENDMENTS TO THE NATIONAL MOTOR FREIGHT CLASSIFICATION® «First_Name» «Last_Name» «Title» «Company» «Address_1» «Address_2» «City» «State» «Zip» «Country» Re: Reclassification of Handheld or Hand-Supported Power Tools, NOI; NMFC Item 186590 – Docket 2019-1, Subject 9 The National Motor Freight Classification® (NMFC®) is a voluntary standard that provides a comparison of products moving via motor carrier in interstate, intrastate and foreign commerce. Classes are assigned based on an evaluation of the product’s transportation characteristics. On Tuesday, February 12, 2019, the Commodity Classification Standards Board (CCSB) will conduct a public meeting to consider proposals for amending the NMFC, as listed in CCSB Docket 2019-1. Our records indicate that you might have an interest in the above-referenced proposal, which will be considered at the meeting. Accordingly, we urge you to review the proposal. The docket as well as facts, data and evidence of record relating to the proposal are available to you without charge at www.nmfta.org. Go to “NMFC” on the navigation bar, click on “Public Docket Files” and then click on “2019-1.” If you have an interest in the proposal, you are invited to attend the meeting on February 12, 2019 and/or communicate that interest in writing by mail, email or fax prior to the meeting. As an Interested Person, you will be sent the disposition of the proposal. If you wish to become a Party of Record to the proposal, you are likewise invited to attend the meeting; however, you must communicate your interest in writing by mail, email or fax, and submit pertinent information relating to the transportation characteristics—density, handling, stowability and liability—of the product(s) involved, or relevant to packaging materials or methods in connection with proposed packaging amendments, and it must be received by 5:00 pm Eastern Time, February 1, 2019. The information you furnish should include any underlying studies, supporting data and other facts that you deem pertinent. As is our policy, the source of the information furnished will be identified only as “shipper,” and no confidential information will be released. As a party of record, you will be sent the disposition of the proposal and will be entitled to seek reconsideration should you disagree with that disposition. Written submissions received by the CCSB by 5:00 pm Eastern Time, February 1, 2019, will be included in the public docket file and posted on our website. The CCSB’s decision on the proposal will be based on the information in the public docket file. Submissions received after that will not be part of the public docket file. (Over) 1001 North Fairfax Street, Suite 600 ♦ Alexandria, VA 22314-1798 ♦ ph: 703.838.1810 ♦ fax: 703.683.1094 web: www.nmfta.org ♦ email: [email protected] 2 The meeting will be held at the Hyatt Regency La Jolla, 3777 La Jolla Village Drive, San Diego CA 92122, commencing at 12:30 pm Pacific Time. The telephone number of the hotel is 858.552.1234. If you wish to schedule an appearance at the meeting, if you require further information, or if you do not have Internet access and would like a copy of Docket 2019-1, please contact Colleen Airgood, Classification Assistant, at 703.859.3924 or [email protected]. Very truly yours, COMMODITY CLASSIFICATION STANDARDS BOARD Joel L. Ringer Chairman PROPOSAL NOTIFICATION LIST Docket 2019-1, Subject 9 Re: Tools, electric, hydraulic, pneumatic, or internal combustion engine operated, NOI, hand held or hand supported — Item 186590 Transportation or Logistics Manager Transportation or Logistics Manager AAA Tool & Supply Aim Supply 1450 South State Road 7 14200 E. 35th Pl. Hollywood FL 33023 #103 Aurora CO 80011 Transportation or Logistics Manager Accurate Tool Co. Transportation or Logistics Manager 891 Fernhill Rd. Aim Supply West Chester PA 19380 7337 Bryan Dairy Rd Largo FL 33777 Transportation or Logistics Manager Ace Hardware Transportation or Logistics Manager 2200 Kengsington Ct. Air Turbine Technology, Inc. Oak Brook IL 60523 1225 Broken Sound Parkway NW Suite D Transportation or Logistics Manager Boca Raton FL 33487 Ace Tool 2201 Wantagh Ave. Transportation or Logistics Manager Wantagh NY 11793 Air-Lake Machine & Welding Inc. 21710 Grenada Ave. Transportation or Logistics Manager Lakeville MN 55044 Acme Electric 1800 Mineral Spring Ave. Transportation or Logistics Manager North Providence RI 02904 Airmatic 284 Three Tun Rd. Transportation or Logistics Manager Malvern PA 19355 Acme Tools 1603 12th Avenue N. Transportation or Logistics Manager Grand Forks ND 58203 Airtool Equipment Rental 6824 Long Dr. Transportation or Logistics Manager Houston TX 77087 Action Machinery PO Box 20045 Transportation or Logistics Manager Lehigh Valley PA 18002 AJ Wholesale Distributors, Inc. 6925 N Paramount Blvd. Transportation or Logistics Manager Long Beach CA 90805 Advanced Generator 10s244 Schoger Dr. Transportation or Logistics Manager Naperville IL 60564 Alcoa 6833 W Willis Rd. Transportation or Logistics Manager Ste. 5050 Advanced Machinery Chandler AZ 85226 4530 Wadsworth Rd. Dayton OH 45414 Transportation or Logistics Manager Alfa Tools Transportation or Logistics Manager 7845 N. Merrimac Ave. Advanced Superabrasives Morton Grove IL 60053 1270 N Main St. Mars Hill NC 28754 Transportation or Logistics Manager Alfra Tools 100 Chaddick Dr. Wheeling IL 60090 PROPOSAL NOTIFICATION LIST Docket 2019-1, Subject 9 Re: Tools, electric, hydraulic, pneumatic, or internal combustion engine operated, NOI, hand held or hand supported — Item 186590 Transportation or Logistics Manager Transportation or Logistics Manager All Toll Service Apex Tool Group HQ 1571 N. Maple Ave. 14600 York Rd. Fresno CA 93703 Suite A Sparks MD 21152 Transportation or Logistics Manager Allied High Tech Products, Inc. Transportation or Logistics Manager 2376 E Pacifica Pl. AR Tools & Machinery, Inc. Rancho Dominguez CA 90220 12009 E. Empire Ave. Bldg C Transportation or Logistics Manager Spokane Valley WA 99206 Amco Metal Products 7901 Beechcraft Ave. Transportation or Logistics Manager Ste. H Archrock Gaithersburg MD 20879 16666 Northchase Dr. Houston TX 77060 Transportation or Logistics Manager AMECO Transportation or Logistics Manager 2106 Anderson Rd. Arconic Fastening Systems Greenville SC 29611 555 Gurthridge Court Norcross GA 30092 Executive Director American Measuring Tool Manufacturers Transportation or Logistics Manager Association (AMTMA) ARD Manufacturing 8562 East Avenue 23429 North 35th Drive Mentor OH 44060 Glendale AZ 85310 Transportation or Logistics Manager Transportation or Logistics Manager American Pneumatic Tool Arkansas Mill Supply 1000 South Grand Ave. 701 Commerce Road Santa Ana CA 92705 Pine Bluff AR 71611 Transportation or Logistics Manager Transportation or Logistics Manager AMES Taping Tools Astro Pneumatic Tools 1327 Northbrook Parkway 1230 Santa Anita Suite 400 #E Suwanee GA 30024 South El Monte CA 91733 Transportation or Logistics Manager Transportation or Logistics Manager Amick Farms ATF Supply 2079 Batesburg Highway 731 E. Glendale Ave. Batesburg SC 29006 Sparks NV 89431 Transportation or Logistics Manager Transportation or Logistics Manager Anchor Tool & Plastic Atlanta Grotnes 8109 Lewis Rd. 305 Selig Dr SW Minneapolis MN 55427 Atlanta GA 30336 Transportation or Logistics Manager Transportation or Logistics Manager Anderson Floor Co. Atticus Aviation 7545 Pingue Dr. 1957 SW S Macedo Blvd. Worthington OH 43085 Port St. Lucie FL 34984 PROPOSAL NOTIFICATION LIST Docket 2019-1, Subject 9 Re: Tools, electric, hydraulic, pneumatic, or internal combustion engine operated, NOI, hand held or hand supported — Item 186590 Transportation or Logistics Manager Transportation or Logistics Manager AXXAIR USA Ballew Saw & Tool 4380 Mustang Rd. 325 S Kimbrough Ave. Alvin TX 77511 Springfield MO 65806 Transportation or Logistics Manager Transportation or Logistics Manager B & C Machine Co. Barbo Machinery 8301 SW 3rd Street 14811 NE Airport Way Okalhoma City OK 73128 Ste. 400 Portland OR 97230 Transportation or Logistics Manager B & R Tool & Supply Transportation or Logistics Manager 1711 Callens Rd Bargain Supply Ventura CA 93003 844 E Jefferson St. Louisville KY 40206 Transportation or Logistics Manager Back Machine Shop Transportation or Logistics Manager 685 20th St N Bartell Morrison USA Springfield MI 49037 200 Commerce Dr. Freehold NJ 07728 Transportation or Logistics Manager Baileigh Industrial, Inc. Transportation or Logistics Manager P.O. Box 531 BIC Auctions Manitowoc WI 54220 301 E Henry St. Mount Pleasant IA 52641 Transportation or Logistics Manager Baileigh Industrial, Inc. Transportation or Logistics Manager 1455 South Campus Avenue Big Tool Supply Ontario CA 91761 4640 E. 63rd St. South Derby KS 67037 Transportation or Logistics Manager Bailey's Transportation or Logistics Manager 1222 Commerce Ave. Biro Manufacturing Ste. D 1114 W Main St. Woodland CA 95776 Marblehead OH 43440 Transportation or Logistics Manager Transportation or Logistics Manager Bailey's Blackstone Industries, LLC 1210 Commerce Ave. 16 Stony Hill Road Suite 8 Bethel CT 06801 Woodland CA 95776 Transportation or Logistics Manager Transportation or Logistics Manager Blackwater River Tools Baldor 2503 N V St. P.O. Box 2400 Pensacola FL 32505 Fort Smith AR 72901 Transportation or Logistics Manager Transportation or Logistics Manager Blain Supply Ballard International 3507 E Racine St. 51920 Woodward Ave. Janesville WI 53546 Pontiac MI 48342 PROPOSAL NOTIFICATION LIST Docket 2019-1,
Load more

Recommended publications
  • 06/27/19 Severson, Weathers, Mackey & Others Estate Auction
    09/25/21 09:13:59 06/27/19 Severson, Weathers, Mackey & Others Estate Auction Auction Opens: Sat, Jun 22 3:00pm PT Auction Closes: Thu, Jun 27 5:30pm PT Lot Title Lot Title 0001 Nice 2013 Kubota B2320HSD Tractor CASH 0028 Oxygen & Acetylene Torch Setup ONLY! 0029 Central Hydraulics 20-Ton Press 0002 Mac Tools MW200 UltraMig 200 Welder - 0030 2 Sets of Jack Stands Tested Works 0031 Motorcycle Stand? 0003 Ferret 40 Charging System Analyzer 0032 Portable Vehicle Hydraulic Lift / Jack 0004 Mac Tools 3-1/2? Ton MFJ35 Hydraulic Floor Jack 0033 Multi-Gear Lube Oil Drum w/Pump & Oil 0005 Dual Halogen Light Tripod Utility Light 0034 Central Pneumatic 3/8" & 1/2" Drive Air Wrenches 0006 FCI Professional Parts Cabinet - Loaded 0035 Central Pneumatic Air Wrench, Ratchet & 0007 FCI Professional Parts Cabinet - Loaded Flush Gun 0008 Cornwell Rolling Tool Chest - Loaded! 0036 Matco Tools 1/2" Drive Stubby Impact Wrench 0009 4 Halide Grow Light 22" x 20" Reflectors 0037 Mac Tools Air Cutoff Tool w/3 Bx. Of Cutoff 0010 Osram Sylvania Auto Bulbs Parts Organizer Wheels 0011 Sun Service Equipment Parts Cabinet - Loaded 0038 4 Drill Bit Indexes 0012 Sears Engine Analyzer & Mac Digital Multi- 0039 Automotive Tune Up Analyzer & Digital Multi- Meter Meter 0013 Pittsburg Heavy Duty 3-Ton Hydraulic Floor 0040 Mueller Kueps Universal Press Support Jack 0041 Easy Rider, Playboy & Other Magazines 0014 Matco Diagnostics Lab Scope & Digital 0042 Hydraulic Press Accessories & Jack Analyzer 0043 Come-A-Longs & Engine Hoist Crane 0015 Wilmar? 2-Ton Hydraulic Floor Jack
    [Show full text]
  • The Stanley Works 2005 Annual Report
    FINANCIAL HIGHLIGHTSHIGHLIGHTS (MILLIONS OF DOLLARS, EXCEPT PER SHARE AMOUNTS) 2005 2004 CHANGE Closing market price per share $ 48.04 $ 48.99 (2%) Total return (share price change plus dividends) 1% 35% Net sales from continuing operations $ 3,285 $ 2,997 10% Operating income from continuing operations $ 445 $ 412 8% Percent of sales 13.5% 13.8% (30bp) Net earnings from continuing operations $ 272 $ 237 15% Per share from continuing operations $ 3.18 $ 2.81 13% Net earnings $ 270 $ 367 (27%) Per share $ 3.16 $ 4.36 (28%) Free cash flow* $ 294 $ 317 (8%) Return on capital employed from continuing operations 14.8% 14.8% – Dividends per share $ 1.14 $ 1.08 6% * REFER TO PAGE 38 OF MD&A FOR THE RECONCILIATION OF OPERATING CASH FLOW TO FREE CASH FLOW TABLE OF CONTENTS LONG-TERM FINANCIAL OBJECTIVES BUSINESS SECTION SALES GROWTH Letter to Shareowners page 2 3-5% Organic Growth The Scorecard page 7 8-12% Growth Including Acquisitions Business Overview page 8 FINANCIAL PERFORMANCE FINANCIAL SECTION Mid-teens percentage EPS Growth Management’s Discussion And Free Cash Flow greater than or equal to Net Income Analysis of Financial Condition ROCE In 12-15% Range And Results of Operations page 31 Financial Statements page 47 DIVIDEND Notes page 51 Continued Growth CORPORATE SECTION CREDIT RATINGS Investor and Shareowner LONG-TERM“Upper Tier” Investment FINANCIAL Grade OBJECTIVES Information page 76 Board of Directors and Executive Officers page 77 THE STANLEY WORKS, AN S&P 500 COMPANY, IS A WORLDWIDE SUPPLIER OF TOOLS, HARDWARE AND SECURITY SOLUTIONS FOR PROFESSIONAL, INDUSTRIAL AND CONSUMER USE.
    [Show full text]
  • Automotive/Fabrication Shop 09-20-14 Auction Held At: 8600
    AUTOMOTIVE/FABRICATION SHOP 09-20-14 AUCTION HELD AT: 8600 S. I-35 SERVICE ROAD, OKC BUYER’S GUIDE The descriptions listed are believed to be correct, however, no warranty or guarantee, either express or implied shall be given, every item sold as is. Bidders shall rely upon their own inspections of the property and not upon any representations or descriptions of Dakil Auctioneers, Inc., either oral or written. ALL SALES FINAL ALL PROCEEDS DUE IMMEDIATELY FOLLOWING AUCTION 10% BUYER’S PREMIUM ON ALL PURCHASES 3% CONVENIENCE FEE ON ALL CREDIT CARD PURCHASES ALL ITEMS SOLD AS IS, NO WARRANTY OR GUARANTEE $50 PROCESSING FEE ON ALL TITLED VEHICLES REMOVAL TIMES : DAY OF AUCTION UNTIL 6:00 PM, SUNDAY SEPTEMBER 21ST FROM 1:00 PM - 4:00 PM, & MONDAY SEPTEMBER 22 ND FROM 9:00 AM - 5:00 PM. NO EXCEPTIONS! ALL ITEMS LISTED BELOW ARE LOCATED AT: 8600 S. I-35 SERVICE ROAD, OKC _______1 VACUUM PUMP ______35 ACT 3000 REFRIGERANT RECOVERY _______2 VACUUM PUMP RECYCLING _______3 VACUUM PUMP ______36 TOOL BOX & CABINET _______4 VACUUM PUMP ______37 CASE & PARTS (1X) _______5 VACUUM PUMP ______38 TRANSMISSION JACK _______6 VACUUM PUMP ______39 VAC & AIR TANK (2X) _______7 VACUUM PUMP ______40 DISTRIBUTOR CAPS (1X) BOX _______8 VACUUM PUMP ______41 OIL FILTERS (2X) BOXES _______9 PINNACLE A/C RECOVERY MACHINE ______42 MSA GAS MASK ______10 S/S CASE ______43 SURVIVAIR ______11 VACUUM PUMP ______44 CENTER CAPS (1X) LOT ______12 VACUUM PUMP ______45 RAPID FLEXX GUN ______13 VACUUM PUMP ______46 OU, MARBLES, WINDOW WASHER, ROPE, & ______14 VACUUM PUMP ELECTRIC
    [Show full text]
  • Magnetic Tape Measures
    MAGNETIC TAPE MEASURES Confidential Document Property of Milwaukee Electric Tool Corp Brookfield, Wisconsin 53005 JOBSITE RESEARCH RESEARCH FINDINGS • #1 failure caused by dust, dirt and water wearing away numbers and rusting tape • #2 failure is housing breaking due to dropping • Finger used to hold tape out instead of lock • Measuring long pieces of pipe is difficult due to hook roll over • Often used to calculate measurements from scaled blueprints • Belt clips tear up pockets • Overhead measurements difficult when tape flips over Confidential Document Property of Milwaukee Electric Tool Corp Brookfield, Wisconsin 53005 PRODUCT TESTING SAND BLAST ABRASION TEST New Product Symposium Tape Measure vs. Sand Blaster Video (click here) ROBOT LIFE TESTING Confidential Document Property of Milwaukee Electric Tool Corp Brookfield, Wisconsin 53005 MILWAUKEE SOLUTIONS CURRENT ISSUES MILWAUKEE SOLUTIONS Tape Durability Nylon Bond Blade Dust, dirt, water collects on tape Protection and act like sand paper when it 10x more resistant to recoils in the body, wearing off the contamination wear numbers and rusting the blade Drop Protection 5-Point Reinforced Tape Measure housings split open Frame after drops off of ladders and Reinforced housing provides tables. If the tape fully splits open, protection to the tape spool the steel tape and spring are dangerous and spring Locking Users don’t push the lock when Finger Stop they measure unless doing layout Open area for a comfortable marking. Most will hold the tape hold and protected during with their finger in front of the hook retraction housing, but can get snapped when the hook recoils Confidential Document Property of Milwaukee Electric Tool Corp Brookfield, Wisconsin 53005 MILWAUKEE SOLUTIONS CURRENT ISSUES MILWAUKEE SOLUTIONS Hook Roll Off Dual Magnets Measuring long sticks of conduit, One magnet holds the hook steel studs, threaded rod, and black pipe is difficult because the in front and a second hook rolls off the end of the prevents roll off on steel material if not trapped in place studs, conduit, etc.
    [Show full text]
  • Thousands of Products from a Single Source
    Abrasives Appliances & Fireplaces Bathroom Accessories Cabinets & Counter Tops Cutting Tools Fasteners Hand Tools Heating & Cooling Hose & Fittings Janitorial Supplies Material Handling Equipment Municipal Materials Pipe, Valves, Fittings, and Tubing Plumbing Supplies Thousands of Products Power Tools & Machinery from a Single Source... Protective Clothing & Safety Precision Measuring Tools Pumps & Compressors Residential Water Systems Shop Supplies Tool & Die and Mold Supplies www.trumbull.com Capabilities and Programs that add Value! Experience Since 1922, Trumbull Industries has provided the products you need when you need them. Trumbull has OVER 300 DEDICATED EMPLOYEES who are eager to provide prompt & friendly assistance. Quality We offer the BEST NAME BRANDS available and QUALITY SERVICE. If you need a supplier that you can count on for timely, accurate delivery, contact us! Inventory Trumbull Industries has over 100,000 PRODUCTS in stock both at the Master Distribution Center in Warren, Ohio and at your local Trumbull branch warehouse. Blanket Order Program Trumbull can maintain LOCAL INVENTORY of “special items” utilizing our blanket order program. If you need products that are factory specials or are difficult to purchase, let Trumbull help you develop a stocking program. Special Services Trumbull provides SPECIAL SERVICES for many customers. Quality inspections and documentation, certifications, custom invoicing are a few examples. Let Trumbull help design a program for you! Supply Chain Management Trumbull can help you develop
    [Show full text]
  • Download the Penn Tool Product Guide!
    Product Guide Quality Products • Superior Service • Competitive Pricing Penn Tool Sales & Service, Inc. • Abrasives • Tool Trailers • Air & Hydraulic Equipment Designed and Built to Your • Cutting Tools - All Makes & Models Specifications • Motorola Radios Supplied & Manned for Your • Safety Equipment & Supplies Outages or Turnarounds • Shipping to Any Location • Welding Supplies Youngstown, OH Lancaster, PA Ann Arbor, MI Cincinnati, OH 625 Bev Road 912 Links Avenue 1900 Highland Drive 2631 Crescentville Road Youngstown,OH 44512 Landisville, PA 17538 Ann Arbor, MI 48108 Sharonville, OH 45241 Phone 800-321-4010 Phone 800-258-9505 Phone 800-848-5577 Phone 800-842-3325 330-758-0845 717-898-3197 734-973-0004 513-772-8982 Fax 330-758-6028 Fax 717-898-9347 Fax 734-973-3220 Fax 513-772-8044 Chicago, IL St. Louis, MO Atlanta, GA Winston Salem, NC 9623 West 194th Street 9500-D Collinsville Road 3380 Town Point Drive 2431 Spaugh Industrial Dr Mokena, IL 60448 Collinsville, IL 62234 Kennesaw, GA 30144 Winston Salem, NC 27103 Phone 888-834-7616 Phone 800-786-2063 Phone 866-289-8917 Phone 800-958-5915 708-478-1254 618-343-0460 678-581-0020 336-774-2370 Fax 708-478-1355 Fax 618-343-0461 Fax 678-581-2828 Fax 336-774-2374 Houston, TX Riverside, MO Lexington, SC 16920 N. Texas Avenue 601 NW Business Park Ln 377 Riverchase Way Unit B Webster, TX 77598 Riverside ,Mo 64150 Lexington, SC. 29072 Phone 877-290-4294 Phone 855-855-3820 Phone 855-222-0292 281-316-6918 816-741-1010 803-794-0900 Fax 281-316-6963 Fax 816-741-1019 Fax 803-739-6940 www.penntoolsalesandservice.com
    [Show full text]
  • Stanley Black & Decker Annual Report 2020
    Stanley Black & Decker Annual Report 2020 Form 10-K (NYSE:SWK) Published: February 21st, 2020 PDF generated by stocklight.com UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-K ☑ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 28, 2019 or ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from ___________ to ___________ Commission File Number 001-05224 STANLEY BLACK & DECKER, INC. (Exact Name Of Registrant As Specified In Its Charter) Connecticut 06-0548860 (State or Other Jurisdiction of (I.R.S. Employer Incorporation or Organization) Identification Number) 1000 STANLEY DRIVE NEW BRITAIN, CT 06053 (Address of Principal Executive Offices and Zip Code) Registrant’s Telephone Number, Including Area Code 860 225-5111 Securities Registered Pursuant to Section 12(b) of the Act: Title Of Each Class Trading Symbol(s) Name Of Each Exchange on Which Registered Common Stock $2.50 Par Value per Share SWK New York Stock Exchange Corporate Units SWP New York Stock Exchange Corporate Units SWT New York Stock Exchange Securities Registered Pursuant To Section 12(g) Of The Act: None Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes þ No ¨ Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ¨ No þ Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.
    [Show full text]
  • Air Tool Productivity Advantages
    Air Tool Productivity Advantages By CAGI Pneumatic Tool Section Compressed air is often referred to as industry's fourth utility because of its prevalence and because of the enhanced manufacturing productivity, end product quality, and safety of operation that it enables. The tools driven by compressed air systems offer unique solutions to the manufacturing, mining and service sectors around the world, providing significant advantages over competing tools powered by energy sources other than compressed air. Wide Range of Applications that Benefit from Air Tool Advantages: The manufacturers of air tools have worked closely with end-users to design and develop a broad range of products that vary in terms of breadth of applicability. Some tools can be used in a wide variety of settings and applications, while others are customized to suit a single task for a specific customer. Regardless of the application, tool users demand solutions that are cost effective, reliable, and dependable while providing a safe means of accomplishing work. In most instances only air tools meet all of these needs. Following are some specific examples of the advantages of air tools when applied in various situations: Electromagnetic Interference The process of producing some products, such as computer chips and components, electrical systems components, airframes, telecommunications gear, etc., require controlled assembly areas to eliminate or reduce possible interference from electric power sources. Naturally, air tools are the best choice for these applications. Continuous Use Air tool mechanisms are generally more reliable in continuous use applications than tools powered by alternative sources. Consequently, air tools are more cost effective over time.
    [Show full text]
  • Pneumatic Pass-Thru Impact Wrench Is Expected to Surpass the Industry Standard Performance of Most Current Standard Pneumatic Ratchets
    EML 4905 Senior Design Project A B.S. THESIS PREPARED IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE DEGREE OF BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING Pneumatic Pass‐Thru Impact Wrench 100% Report Ryan Lucia Felipe de la Cruz Milton Hidalgo Ceotto Advisor: Dr. Benjamin Boesl 11/25/2014 This B.S. Thesis is written in partial fulfillment of the requirements in EML 4905. The contents represent the opinion of the authors and not the Department of Mechanical and Materials Engineering. Page | ii ETHICS STATEMENT AND SIGNATURES The work submitted in this B.S. thesis is solely prepared by a team consisting of Ryan Lucia, Felipe de la Cruz, and Milton Ceotto and it is original. Excerpts from others’ work have been clearly identified, their work acknowledged within the text and listed in the list of references. All of the engineering drawings, formulations, design work, prototype development and testing reported in this document are also original and prepared by the same team of students. Page | iii TABLE OF CONTENTS ETHICS STATEMENT AND SIGNATURES ......................................................................................................... ii TABLE OF CONTENTS .................................................................................................................................... iii List of Figures ................................................................................................................................................ v List of Tables ..............................................................................................................................................
    [Show full text]
  • Product Guide Compatibility List Collated Nails
    PRODUCT GUIDE COMPATIBILITY LIST COLLATED NAILS WWW.DUCHESNE.CA TABLE OF CONTENTS TABLE OF CONTENTS Presentation of the guide ................................................................................................................................................. 3 Available shanks and finishes ........................................................................................................................................... 4 GENERAL CONSTRUCTION & FRAMING ........................................................................................................................... 5 ■ 34° Paper strip nails ....................................................................................................................................................5-6 ■ 34° Paper strip joist hanger nails .................................................................................................................................. 7 ■ 28° Wire strip nails .......................................................................................................................................................... 8 ■ 21° Plastic strip nails ....................................................................................................................................................... 9 ■ 15° Wire collated coil nails ....................................................................................................................................10-11 ■ 15° Wire collated siding coil nails .............................................................................................................................
    [Show full text]
  • Hand Tools Market
    +44 20 8123 2220 [email protected] Hand Tools Market - Global Outlook and Forecast 2020-2025 https://marketpublishers.com/r/H0D6A08854D7EN.html Date: September 2020 Pages: 312 Price: US$ 3,500.00 (Single User License) ID: H0D6A08854D7EN Abstracts In-depth Analysis and Data-driven Insights on the Impact of COVID-19 Included in this Global Hand Tools Market Report The global hand tools market by revenue is expected to grow at a CAGR of over 4% during the period 2019–2025. The global hand tools market is expected to grow 1.3X times during the forecast period. The market is expected to witness a considerable growth post-2020. Rapid industrialization and increasing applications in household and commercial sectors are primarily driving the market. Automobile, aerospace, construction, electronics, and shipbuilding are the major end-use of these devices. The tool industry landscape is moving toward sophistication and customization that can determine market leadership in a competitive scenario. Advancements in technology and the extensive usage of battery-driven devices have fueled the adoption of cordless power tools and related accessories that are light and durable. This growth factor for the substitutes is expected to challenge the potential of hand tools. The DIY culture can be one of the major drivers for these devices in the coming years with a high scope for penetration in growing economies. The global hand tools market suffered a downfall during the COVID-19 crisis as most economic activities were halted during Q1 and Q2 in 2020. Most major revenue- generating end-users such as construction, automotive, commercial renovation, and home improvement activities were affected, leading to a decline in the market sales.
    [Show full text]
  • 3. Pneumatic Tools and Equipment
    Pneumatic Tools Introduction Pneumatics refers to technology dealing with the application of pressurized gas (potential energy) to produce mechanical motion (kinetic energy). Pneumatic systems used in the fire/rescue service primarily use compressed gas as the source of power. There are a variety of pneumatic tools used in the fire/rescue service, each with a specific function. While some of these tools were developed specifically for rescue, many are simply borrowed from other industries, such as the automotive repair industry. All of the components of a pneumatic tool setup will be discussed in this module, starting with the air source and working downstream to the actual tool. Air Sources The key component to any pneumatic tool or airbag operation is compressed air. Compressed air can be obtained from a variety of sources on a rescue incident: Air Compressors Air compressors provide an unlimited supply of air. The most common type is the positive- displacement compressor that uses a reciprocating piston. (Other types that utilize impellers or rotary screws do exist.) The piston air compressor has components similar to an internal combustion engine: a crankshaft, connecting rod and piston, cylinder and a valve head. Typical compressors come in 1- or 2- cylinder versions and can be single- or two- stage. The compressor supplies a storage tank. When needed, air is drawn from the tank and the compressor replenishes it. Air compressors stop supplying the storage tank when pressure inside the tank reaches a specified limit. When air is consumed and the pressure in the storage tank drops below a certain level, the compressor starts up again.
    [Show full text]