DOCSLIB.ORG

1 Iso/Iec 7811-6:2018 2 Iso/Iec 18033-6:2019 3 Iso

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
1 Iso/Iec 7811-6:2018 2 Iso/Iec 18033-6:2019 3 Iso Nr. Standard reference Title Identification cards -- Recording technique -- Part 6: Magnetic stripe: High 1 ISO/IEC 7811-6:2018 coercivity IT Security techniques -- Encryption algorithms -- Part 6: Homomorphic 2 ISO/IEC 18033-6:2019 encryption Information technology -- JPEG XS low-latency lightweight image coding 3 ISO/IEC 21122-1:2019 system -- Part 1: Core coding system 4 ISO 5593:2019 Rolling bearings -- Vocabulary 5 ISO 12625-1:2019 Tissue paper and tissue products -- Part 1: Vocabulary Ships and marine technology -- Marine cranes -- Operation and maintenance 6 ISO 21132:2019 requirements 7 ISO 11231:2019 Space systems -- Probabilistic risk assessment (PRA) Road vehicles -- Interchange of digital information on electrical connections 8 ISO 11992-1:2019 between towing and towed vehicles -- Part 1: Physical and data-link layers 9 ISO 20078-3:2019 Road vehicles -- Extended vehicle (ExVe) web services -- Part 3: Security Road vehicles -- Liquefied petroleum gas (LPG) fuel systems components -- 10 ISO 20766-9:2019 Part 9: Pressure relieve device (PRD) Microstructure of cast irons -- Part 4: Test method for evaluating nodularity in 11 ISO 945-4:2019 spheroidal graphite cast irons Paints and varnishes -- Test method for evaluation of adhesion of elastic 12 ISO 22970:2019 adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage Preparation of steel substrates before application of paints and related 13 ISO 11125-2:2018 products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution 14 ISO 21342:2019 Synchronous belt drives -- Automotive belts and pulleys Gas welding equipment -- Pressure gauges used in welding, cutting and allied 15 ISO 5171:2019 processes Plastics -- Determination of dynamic mechanical properties -- Part 1: General 16 ISO 6721-1:2019 principles Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion- 17 ISO 6721-2:2019 pendulum method Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile 18 ISO 6721-4:2019 vibration -- Non-resonance method 19 ISO 15512:2019 Plastics -- Determination of water content 20 ISO 15509:2019 Adhesives -- Determination of the bond strength of engineering-plastic joints Plastics -- Determination of the ultimate aerobic biodegradability of plastic 21 ISO 17556:2019 materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved Touring ski-boots for adults -- Interface with touring ski-bindings -- 22 ISO 9523:2019 Requirements and test methods Series 1 freight containers -- Specification and testing -- Part 3: Tank 23 ISO 1496-3:2019 containers for liquids, gases and pressurized dry bulk 24 ISO 9698:2019 Water quality -- Tritium -- Test method using liquid scintillation counting Timber structures -- Bending strength of I-beams -- Part 1: Testing, evaluation 25 ISO 22389-1:2010 and characterization 26 ISO 9202:2019 Jewellery and precious metals -- Fineness of precious metal alloys 27 ISO 8124-10:2019 Safety of toys -- Part 10: Experimental sets for chemistry and related activities 28 ISO 8124-11:2019 Safety of toys -- Part 11: Chemical toys (sets) other than experimental sets Geotechnical investigation and testing -- Field testing -- Part 11: Flat 29 ISO 22476-11:2017 dilatometer test Automation systems and integration -- Evaluating energy efficiency and other 30 ISO 20140-3:2019 factors of manufacturing systems that influence the environment -- Part 3: Environmental performance evaluation data aggregation process Soil quality -- Measurement of enzyme activity patterns in soil samples using 31 ISO 20130:2018 colorimetric substrates in micro-well plates 32 ISO 18451-1:2019 Pigments, dyestuffs and extenders -- Terminology -- Part 1: General terms Information technology -- Object Management Group Automated Function 33 ISO/IEC 19515:2019 Points (AFP), 1.0 Information technology database languages -- SQL technical reports -- Part 8: 34 ISO/IEC TR 19075-8:2019 Multi-dimensional arrays (SQL/MDA) Information technology -- User interface -- Gesture-based interfaces across 35 ISO/IEC 30113-5:2019 devices and methods -- Part 5: Gesture Interface Markup Language (GIML) 36 ISO 5647:2019 Paper and board -- Determination of titanium dioxide content Ships and marine technology -- Check valves for use in low temperature 37 ISO 20602:2019 applications -- Design and testing requirements Technical product documentation (TPD) -- Relief grooves -- Types and 38 ISO 18388:2016 dimensioning Molecular biomarker analysis -- Methods of analysis for the detection and 39 ISO 20813:2019 identification of animal species in foods and food products (nucleic acid-based methods) -- General requirements and definitions Sustainable and traceable cocoa -- Part 1: Requirements for cocoa 40 ISO 34101-1:2019 sustainability management systems Sustainable and traceable cocoa -- Part 2: Requirements for performance 41 ISO 34101-2:2019 (related to economic, social and environmental aspects) 42 ISO 34101-3:2019 Sustainable and traceable cocoa -- Part 3: Requirements for traceability Sustainable and traceable cocoa -- Part 4: Requirements for certification 43 ISO 34101-4:2019 schemes Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk 44 ISO 6504-1:2019 method for white and light-coloured paints 45 ISO 3140:2019 Essential oil of sweet orange expressed [Citrus sinensis (L.)] Sustainability in buildings and civil engineering works -- Framework for methods of assessment of the environmental, social and economic 46 ISO 21931-2:2019 performance of construction works as a basis for sustainability assessment -- Part 2: Civil engineering works 47 ISO 21702:2019 Measurement of antiviral activity on plastics and other non-porous surfaces Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: 48 ISO 21302-1:2019 Designation system and basis for specifications Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: 49 ISO 21302-2:2019 Preparation of test specimens and determination of properties Petroleum and natural gas industry -- Pipeline transportation systems -- 50 ISO 19345-1:2019 Pipeline integrity management specification -- Part 1: Full-life cycle integrity management for onshore pipeline Petroleum and natural gas industries -- Floating offshore structures -- Part 1: 51 ISO 19904-1:2019 Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures Magnesium and magnesium alloys -- Wrought magnesium and magnesium 52 ISO 3116:2019 alloys Nuclear facilities -- Ventilation penetrations for shielded enclosures -- 53 ISO 15080:2001/Amd 1:2019 Amendment 1 54 ISO 20942:2019 Leather -- Full chrome upper leather -- Specification and test methods Building construction machinery and equipment -- Mobile crushers -- Part 2: 55 ISO 21873-2:2019 Safety requirements and verification Surface chemical analysis -- Secondary ion mass spectrometry -- Method for 56 ISO 22415:2019 determining yield volume in argon cluster sputter depth profiling of organic materials Intelligent transport systems -- Shareable geospatial databases for ITS 57 ISO 19297-1:2019 applications -- Part 1: Framework Intelligent transport systems -- Freight land conveyance content identification 58 ISO 26683-3:2019 and communication -- Part 3: Monitoring cargo condition information during transport Environmental management systems -- Guidelines for a flexible approach to 59 ISO 14005:2019 phased implementation Cryogenic vessels -- Pilot operated pressure relief devices -- Part 4: Pressure- 60 ISO 21013-4:2012/Amd 1:2019 relief accessories for cryogenic service -- Amendment 1 Nanotechnologies -- Method to quantify air concentrations of carbon black and 61 ISO/TS 21361:2019 amorphous silica in the nanoparticle size range in a mixed dust manufacturing environment Traditional Chinese medicine -- General requirements for smokeless 62 ISO 21366:2019 moxibustion devices General methods of tests for pigments and extenders -- Part 28: Determination 63 ISO 787-28:2019 of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS 64 ISO 22517:2019 Leather -- Chemical tests -- Determination of pesticide residues content Information technology -- Self-contained Information Retention Format (SIRF) 65 ISO/IEC 23681:2019 Specification Software and systems engineering -- Tools and methods for product line 66 ISO/IEC 26552:2019 architecture design 67 ISO/IEC 13251:2019 Information technology -- Collection of graphical symbols for office equipment Rolling bearings -- Tapered roller bearings -- Boundary dimensions and series 68 ISO 355:2019 designations Paper and board -- Determination of bending stiffness -- General principles for 69 ISO 5628:2019 two-point, three-point and four-point methods Road vehicles -- Liquefied petroleum gas (LPG) fuel systems components -- 70 ISO 20766-6:2019 Part 6: Pressure relief valves (PRV) Cutting tool data representation and exchange -- Part 313: Creation and 71 ISO/TS 13399-313:2019 exchange of 3D models -- Burrs 72 ISO 13942:2019 Bonded abrasive products -- Limit deviations and run-out tolerances Tools for pressing -- Compression springs with rectangular section -- Housing 73 ISO 10243:2019 dimensions and colour coding 74 ISO 3251:2019 Paints, varnishes and plastics -- Determination of non-volatile-matter content 75 ISO 18692-1:2018 Fibre ropes for offshore stationkeeping -- Part 1: General specification 76 ISO/TR 12998:2019
Load more

Recommended publications
  • SAE J1850 PWM Y VPW
    AGRADECIMIENTOS En primer lugar, quiero dar las gracias a todos aquellos que han hecho posible que hoy en día esté estudiando esta carrera, mi familia. Sin ellos no hubiera llegado tan lejos en la vida y no sería la persona que hoy soy. Pero especialmente quiero agradecer a mi hermana el que me haya dado todo su apoyo en todo momento. En segundo lugar, también agradecer a mis amigos y amigas, compañeros y compañeras del Grado en Ingeniería de Tecnologías de Telecomunicación (GITT), que me han acompañado en todo momento. Además, agradecer a todos los profesores que me han impartido clase a lo largo de estos años por todos los conocimientos que me han enseñado. Y especialmente, quiero dar las gracias a mis directores César Sánchez Meléndez y Raúl Alcaraz Martínez por su gran ayuda, dedicación y por darme la oportunidad de tenerles en este gran proyecto. INDICE RESUMEN .............................................................................................................................................. 1 ABSTRACT .............................................................................................................................................. 3 PARTE I: MEMORIA ................................................................................................................................ 5 INTRODUCCIÓN ..................................................................................................................................... 6 MOTIVACIONES ...........................................................................................................................................
    [Show full text]
  • Cybersecurity Research Considerations for Heavy Vehicles
    DOT HS 812 636 December 2018 Cybersecurity Research Considerations for Heavy Vehicles Disclaimer This publication is distributed by the U.S. Department of Transportation, National Highway Traffic Safety Administration, in the interest of information exchange. The opinions, findings, and conclusions expressed in this publication are those of the authors and not necessarily those of the Department of Transportation or the National Highway Traffic Safety Administration. The United States Government assumes no liability for its contents or use thereof. If trade or manufacturers’ names are mentioned, it is only because they are considered essential to the object of the publication and should not be construed as an endorsement. The United States Gov- ernment does not endorse products or manufacturers. Suggested APA Format Citation: Stachowski, S., Bielawski, R., & Weimerskirch, A. (2018, December). Cybersecurity research considerations for heavy vehicles (Report No. DOT HS 812 636). Washington, DC: National Highway Traffic Safety Administration. 1. Report No. 2. Government Accession No. 3. Recipient's Catalog No. DOT HS 812 636 4. Title and Subtitle 5. Report Date Cybersecurity Research Considerations for Heavy Vehicles December 2018 6. Performing Organization Code 7. Authors 8. Performing Organization Report No. Stephen Stachowski, P.E. (UMTRI), Russ Bielawski (UMTRI), André Weimerskirch 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) University of Michigan Transportation Research Institute 2901 Baxter Rd Ann Arbor, MI 48109 11. Contract or Grant No. DTNH22-15-R-00101, a Vehicle Electronics Systems Safety IDIQ 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered National Highway Traffic Safety Administration Final Report 1200 New Jersey Avenue SE.
    [Show full text]
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus February 2020 International Standards in process ISO/DIS Milk — Definition and evaluation of the overall 8196-3 accuracy of alternative methods of milk analy- An International Standard is the result of an agreement between sis — Part 3: Protocol for the evaluation and the member bodies of ISO. A first important step towards an Interna- validation of alternative quantitative methods of tional Standard takes the form of a committee draft (CD) - this is cir- milk analysis culated for study within an ISO technical committee. When consensus ISO/CD 29981 Milk products — Enumeration of bifidobacteria has been reached within the technical committee, the document is — Colony count technique at 37 degrees C sent to the Central Secretariat for processing as a draft International TC 37 Language and terminology Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently ISO/CD 23155 Interpreting services — Conference interpreting carried out on a final draft International Standard (FDIS), the approval — Requirements and recommendations criteria remaining the same. TC 41 Pulleys and belts (including veebelts) ISO/CD 23586 Conveyor belts — Indentation rolling resistance related to belt width — Requirements, testing TC 43 Acoustics ISO/CD 10844 Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres ISO/CD 3382-3 Acoustics — Measurement of room acoustic CD registered parameters — Part 3: Open plan offices TC 45 Rubber and rubber products Period from 01 January to 01 February 2020 ISO/CD 8330 Rubber and plastics hoses and hose assem- blies — Vocabulary These documents are currently under consideration in the technical committee.
    [Show full text]
  • Development of Monitoring Applications for Refrigerated Perishable Goods Transportation”
    UNIVERSIDAD POLITÉCNICA DE MADRID ESCUELA TÉCNICA SUPERIOR DE INGENIEROS AGRÓNOMOS “DEVELOPMENT OF MONITORING APPLICATIONS FOR REFRIGERATED PERISHABLE GOODS TRANSPORTATION” PhD Thesis Luis Ruiz Garcia Ingeniero Agrónomo Madrid 2008 Departamento de Ingeniería Rural Escuela Técnica Superior de Ingenieros Agrónomos “DEVELOPMENT OF MONITORING APPLICATIONS FOR REFRIGERATED PERISHABLE GOODS TRANSPORTATION” Doctorando: Luis Ruiz Garcia (Ingeniero Agrónomo) Co-directora: Pilar Barreiro Elorza (Doctora Ingeniera Agrónoma) Co-director: José Ignacio Robla Villalba (Doctor en Ciencias Químicas) Madrid 2008 UNIVERSIDAD POLITÉCNICA DE MADRID (D-15) Tribunal nombrado por el Magfco. y Excmo. Sr. Rector de la Universidad Politécnica de Madrid, el día de de 200 Presidente: ……………………………………………………………………………….. Secretario: ………………………………………………………………………………... Vocal: …………………………………………………………………………………….. Vocal: …………………………………………………………………………………….. Vocal: …………………………………………………………………………………….. Suplente: …………………………………………………………………………………. Suplente: …………………………………………………………………………………. Realizado el acto de defensa y lectura de Tesis el día de de 200 En la E.T.S.I. Agrónomos EL PRESIDENTE LOS VOCALES EL SECRETARIO para ti,... porque sin ti no sería nada. Tú haces que me sienta vivo. PhD Tesis Luis Ruiz Garcia Acknowledgements At the beginning of this document I would like to gratefully acknowledge the help and collaboration received for those persons and organizations that have made possible the development of my PhD Thesis, and specially: A Pilar, por toda la ayuda que me ha dado durante los cuatro años que ha durado mi doctorado. A Margarita, por darme la oportunidad de trabajar en el Laboratorio de Propiedades Físicas, y confiar en mí desde el primer momento. También por crear un buen ambiente de trabajo. A José Ignacio, por facilitarme todo lo necesario para mi trabajo durante estos años. A Loredana, por todos los momentos que hemos vivido juntos.
    [Show full text]
  • O )Tein Leets Obje Ectioi N |P
    ‘ ■■Sjm • ' ■ ‘ ft iwww.magicvaralley.cp^ : -frt; A D C e 2 3 0 6 3 2 036 2 12/14/2004 __________ . M jjri PARKE -I'lICRO-PUBLISH 2 6 ,2 7 E YAND^JDELL EL PA S O 7 9 9 0 3 m i l l K , _|^vinFallSj^[d£io/99thw arj_^0.1 0 5 Wednesday,y . April 14, 2004 G o o d MORNW IN G ' i t ‘T W e a t h e r Vo)teinleets objeectioin | P . „ Today:Q-C o o le r wtth in cn Tvlost o f the peoplepie on the clouds. H 1 board agreed e-mailing:n g is a n O K E - m a i1 l balloting on. Jerome grantit support thing to d a ' Rogers} sas a id “But Iow 33. .fy bccause tiie dty OfTWinv i n l ^ b a P; f ly stakeholder, w^re certsertainly ex- v i o l a t e c open meetiiings law, T.F.\ official says plorir^ these concerns.’ns.” ler (he dtyf ofo f Jerome^ application furfunding com cs from public: ercn- AftCT stepping back± ai n d tak- M o n e y B y ^ M H I e r le situadon, M n tter fo rafcd ^ grant to m ak e road, tlti[Ities. a n d public m oney pan!a ^ ing anotiier lixik at tiie £ Conimgrclal real eitMtate: --------------------------scwcrandmd water Improvements pa;pays th e salaries of Ro^ius anand SIEOO Executive BoanMtd Ciiair- ime Bune and extend anUl asslsum t man Jerry Beck deddeiIded th e or- Idaho's new online;e TWIN FALLS1 5 - The e-mail at Jerome lerc to the members of sewer servKrvice OD the Crossroads •V/e believe they’re a publiibllc ganlzadon will adhen database could dravraw .
    [Show full text]
  • Ifm Control Systems for Mobile Vehicles Catalogue 2013/2014
    Control systems for mobile vehicles Catalogue 2013/2014 www.ifm.com/sg/mobile ifm – the company 6 - 7 General information 8 - 21 Standards and approvals / list of articles 22 - 26 Basic control systems 28 - 33 Mobile controllers 34 - 57 I/O modules 58 - 75 Dialogue modules / displays 76 - 85 Cameras 86 - 89 Diagnostic and service units 90 - 94 Signal converters 96 - 98 Sensors 100 - 112 ifm – worldwide addresses 114 - 117 ifm – the company The company in your vicinity. State-of-the-art communication. With the right address – www.ifm.com – only a mouse click separates you from the world of automation technology. See the power of our products in interactive representations. Gain an impression with 3-dimension-al views of our units. Down- load CAD drawings for direct integration in your applications. Or order online in ifm’s e-shop - fast, convenient and reliable. We are there for you. Close contact with our customers is part of our success. Therefore we have consistently developed our sales network right from the start. Today ifm electronic is represented in more than 70 countries – close to you! With application advice and service at the heart of our operation. For the introduction of new products and technologies we support you with workshops and seminars in our training centres or in your plant. Security by success. Since its foundation in 1969 ifm electronic has constantly grown, now having more than 5000 employees worldwide, and achieved a turnover of more than EUR 610 million in 2012. This success gives you the security of having a reliable partner for the implementation of your automation projects.
    [Show full text]
  • 1 제정 Kspiso9913-2 20061205 광학 및 광학기구 - 콘택 트 렌즈 -2부 : 전량 Ksbiso14835-1 20061201 기계진동 一 말초 혈관 기능의 평가를 위한 분석 방법 에 의한 산소 투과도와 산소 전달 냉간 자극 시험 - 제 1부 :손가락 피부 온도 성결정 측정과 평가
    ► 2006.12.1 ~ 12.30 규격번호 고시일 규격명 규격번호 고시일 규격명 방법 에 의한 산소 투과도와 전달도 결정 1 제정 KSPISO9913-2 20061205 광학 및 광학기구 - 콘택 트 렌즈 -2부 : 전량 KSBISO14835-1 20061201 기계진동 一 말초 혈관 기능의 평가를 위한 분석 방법 에 의한 산소 투과도와 산소 전달 냉간 자극 시험 - 제 1부 :손가락 피부 온도 성결정 측정과 평가 KSPISOTS19979 20061205 안광학 - 콘택트렌즈 - 여러 환자가 사용하 KSBISO14839-2 20061201 기계 진동 一 능동 자기 베어 링을 장착한 회전 는 시착용 콘택 트렌 즈의 위생 관리 기계 의 진동 — 제 2 부 : 진동 평가 KS 이 EC61241-0 20061207 분진방폭전기 기계 • 기구一제 。부 일반요구사항 KSBISO16587 20061201 기계 진동 및 충격 -구조물의 상태 감시 를 위 한성능 매개변수 KSCIEC61241-1 20061207 분진 방폭전기기 계 ・ 기구一 제 1 부 분진 내압방 폭구 조 KSBISO2017-1 20061201 기계진동 및 충격 - 완충 장치 시스템제 1부 절연시 스템의 적용을 위해 교환되 는 기술정 보 KSCIEC61241-10 20061207 분진방폭전기기계 ・ 기구一제 10부 분진폭발 위험 장소 KSBIS020806 20061201 기계 진동 一 중대 형 로터 에 대한 현장 평형 잡 기를 위한 기준과안전장치 KSCEC61241-14 20061207 분진방폭전기기계 •기구一제 14부선정 및 설치 KSPISO1 1 979-5 20061205 안과 삽입물 - 인공 수정체 - 舁 : 생체적합성 KSCEC61241-18 20061207 분진방폭전기기계 ・ 기구一제 18부 분진몰드 KSPISO11979-6 20061205 안과 삽입물 - 인공 수정체 -6부 : 저장 수 방폭구조 명과이동안정성 KSA2175 20061211 아시 아 일관수송용 평 파렛트 KSPISO1 1 979-7 20061205 안과 삽입 물 - 인공 수정 체 7부 : 임상 조사 KSBISO1049 20061 겨 1 벌크성 물체를 위한 연속 이송기계장치一사 KSPISO11980 20061205 안 광학 - 콘택 트렌 즈와 콘택 트렌 즈 관리 용 각 또는 경사형 용기 를 갖는 진동벨트 컨베 품 一임상연구 지침 이어 및 피더 KSPISO15752 20061205 안과 기구 - 눈속조명기 - 광학 방사 안전을 KSBIS01050 20061211 벌크성 물체 를 위한 연속 이송기계 장치 一 스 위한 필수 요구 사항 및 검사 방법 크류 컨베이어 KSPISO15798 20061205 안과 삽입 물 -안과 점탄수술기구 KSBISO1535 20061211 벌크성 물체 를 위한 연속 이송기계 장치 一 용 기형 벨트 컨베이어 （ 휴대형 컨베이어 제외 ） KSPISO1 6671 20061205 안과 삽입물 -안과 수술용 세척 액 _ 벨트 KSPISO16672 20061205 안과 삽입 물 -안구 내 삽입 물 KSBISO1807 2006이 1 벌크성 물체를 위한 연속 이송기계장치 一 사 각 또는 경사형 용기를 갖는 진동 컨베이어 KSPISO8596 20061205 안광학 -시력 검사 -표준시표와그 표시법 및 진동 또는 왕복 피더 KSPISO8597 20061205 광학 및 광학기구 -시력 측정 -시표상관 뱅법 KSBISO1815 20061211 벌크성 물체를 위한 연속 이송기계장치 一 관 형 용기를 갖는 진동 피더 및 컨베이어 KSPISO9394 20061205 안광학 — 콘택트렌즈와 콘택트렌즈 관리 용 품 -토끼 눈을 이용한생체적합성 연구의 결정 KSBISO2109 20061211 연속 이송기계 장치 -벌크성 물체 를 위한 경 부하 벨트컨베 이어 KSPISO9913-1 20061205 광학 및 광학기구 -콘택 트렌 즈 - 1부 : FATT 이달의규격정보 .
    [Show full text]
  • International Standards in Process CD Registered
    International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 January to 01 February 2020 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 4 Rolling bearings ISO/CD 492 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values TC 17 Steel ISO/DIS 23475-1 Testing method for steel tyre cord — Part 1: General requirements TC 20 Aircraft and space vehicles ISO/CD 22591.3 Space systems — Space-based service for a positioning system with high accuracy and safety support applications in low visibility due to weather conditions TC 22 Road vehicles ISO/CD TR 4609 Road vehicles — Report on standardization prospective for automated vehicles (RoSPAV) TC 23 Tractors and machinery for agriculture and forestry ISO/CD 5682-4 Equipment for crop protection — Spraying equipment — Part 4: Test Methods
    [Show full text]
  • Candictionary Keywords U Technical Terms U Standards
    8th edition 2015 CANdictionary Keywords u Technical terms u Standards Explains vocabulary and abbreviations used in CAN technology Covers CAN data link layers, CAN physical layers, and CAN-based higher-layer protocols Includes a short history of CAN developments and application fields CAN in Automation international users’ and manufacturer’s group e. V. CANdictionary 8th edition, 2015 - 4 - Foreword This dictionary briefly describes vocabulary and abbreviations used in CAN technology. It is not supposed to substitute any standard or specification. CAN newcomers may use the CANdictionary to understand technical articles, handbooks, etc. more easily without consulting standards and specifications. The CAN dictionary covers the CAN data link layer, CAN physical layer as well as several CAN-based higher-layer protocols. The editors have tried to include all relevant information. However, users might look for some entries that the editors have not considered or find entries that may not be sufficiently described yet. With regard to a more comprehensive successor edition of the CANdictionary, the editors would appreciate comments and proposals ([email protected]). The editors - 5 - Introduction The internationally standardized, serial bus system Con- troller Area Network (CAN) was originally developed for in-vehicle networking. In 1986, the CAN data link layer protocol was introduced at the SAE conference in Detroit. In 1993, the CAN protocol and the high-speed physical layer were internationally standardized as ISO 11898. Today, this ISO standard comprises the following parts: • ISO 11898-1: Data link layer • ISO 11898-2: High-speed transceiver • ISO 11898-3: Fault-tolerant transceiver • ISO 11898-4: Time-triggered CAN • ISO 11898-5: High-speed transceiver with low- power mode (to be withdrawn, when ISO 11898-2 is updated) • ISO 11898-6: High-speed transceiver with selective wake-up capability (to be withdrawn, when ISO 11898-2 is updated) The Classical CAN data link layer protocol uses one bit rate for the entire frame.
    [Show full text]
  • 2018 Rolling Plan for ICT Standardisation
    ROLLING PLAN FOR ICT STANDARDISATION 2018 Grow EUROPEAN COMMISSION Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Innovation and Advanced Manufacturing KETs, Digital Manufacturing and Interoperability EXECUTIVE SUMMARY The Rolling Plan for ICT Standardisation provides a unique The Rolling Plan 2018 identifies 170 actions organised around bridge between EU policies and standardisation activities in four thematic areas: key enablers, societal challenges, innova- the field of information and communication technologies tion for the single market and sustainable growth. (ICT), allowing for increased convergence of standardisa- tion makers’ efforts towards European policy goals. This The Commission has identified five priority domains1 — 5G, document is the result of a yearly dialogue involving a cloud, cybersecurity, big data and internet of things (IoT) wide-ranging representation of the major standardisation’s —where ICT standardisation is considered most urgent for interested parties as represented in the multi-stakeholder the completion of the digital single market (DSM), as well platform on ICT standardisation. The Rolling Plan focuses as a number of application domains that will benefit from on those actions that can support the EU policies and does standard setting in those horizontal technologies, in par- not seek comprehensiveness as regards to the work pro- ticular eHealth, intelligent transport systems, smart energy grammes of the various standardisation bodies. and advanced manufacturing. The Rolling Plan 2018 con- tinues to include actions in support of the priorities indicat- The identification of the standardisation actions in support ed in the Communication. of European policies made in this document is complemen- EXECUTIVE SUMMARY tary to other instruments, in particular to the annual Union work programme (AUWP).
    [Show full text]
  • CAN in Automation (Cia) - Controller Area Network (CAN)
    CAN in Automation (CiA) - Controller Area Network (CAN) CAN HLP Members only Map home CAN in Automation (CiA) international users and manufacturers group Founded in March 1992, CiA provides technical, product and CAN Information in marketing information with the aim of fostering Controller Area Dutch Network’s image and providing a path for future developments of the CAN protocol. The non-profit trade association with a persistently increasing number of members develops and supports various CAN-based higher layer protocols: CAN Application Layer (CAL), CAN Kingdom, CANopen, DeviceNet. Higher layer CAN the bus CiA members protocols (HLP) only - General introduction - General introduction - CiA specifications - Specifications - CANopen - Technical info - Controller - Devicenet - Marketing info - Applications - CAN Kingdom Events Standardization Products CiA phone +49-9131-69086-0 fax +49-9131-69086-79 Literature Download News email:[email protected] http://www.can-cia.de/ [14.11.1999 12:45:51] CAN in Automation Higher Layer Protocols HLP DeviceNet CANopen General introduction General introduction Technical introduction Technical introduction Specifications Specifications Conformance test Conformance test FAQs FAQs Vendor list CAN Application Layer CAN Kingdom General introduction General introduction Technical introduction Technical introduction Specifications Specifications © CAN in Automation last update: 1999-07-26 http://www.can-cia.de/hg.htm [14.11.1999 12:46:07] CAN in Automation General introduction DeviceNet Page contents:
    [Show full text]
  • Program Rada Instituta Na Usvajanju Standarda Za 2015
    Bosna i Hercegovina Босна и Херцеговина Institut za standardizaciju Институт за стандардизацију PROGRAM RADA INSTITUTA NA USVAJANJU STANDARDA I DRUGIH STANDARDIZACIJSKIH DOKUMENTA ZA 2015. GODINU INSTITUT ZA STANDARDIZACIJU BOSNE I HERCEGOVINE Bosna i Hercegovina, 71123 Istočno Sarajevo, Vojvode Radomira Putnika 34; tel: + 387 57 31 05 60, Informaciono dokumentacioni centar: +387 57 31 05 80; fax: + 387 57 31 05 75;E-mail: [email protected] ; www.bas.gov.ba BAS O 500.06 o N CRO19225Q Važi od: 2014-04-01 U skladu sa zahtjevima EU Uredbe br. 1025/2012 kojom se uređuje evropski standardizacijski sistem, svako evropsko i nacionalno standardizacijsko tijelo mora, barem jednom godišnje izraditi svoj program rada. Program rada mora sadržavati podatke o standardima i drugim standardizacijskim dokumentima koje evropsko i nacionalno standardizacijsko tijelo namjerava pripremiti ili mijenjati i dopunjavati, koje ono priprema ili mijenja i dopunjuje i koje je objavilo u prethodnom razdoblju. Izdavanje programa rada također je obaveza koju nacionalna standardizacijska tijela preuzimaju prihvaćanjem WTO TBT Kodeksa dobre prakse za pripremu, usvajanje i primjenu standarda, a čije je prihvaćanje utvrđeno Sporazumom o tehničkim zaprekama trgovini Svjetske trgovinske organizacije (WTO). Podatke o nacionalnim standardizacijskim tijelima koja su prihvatila Kodeks dobre prakse, ISO/IEC Information Centre objavljuje u publikaciji WTO TBT Standards Code Directory (www.standardsinfo.net). Institut je Kodeks dobre prakse prihvatio 1997. godine. Institut za standardizaciju Bosne i Hercegovine izdaje program rada, u elektronskom obliku jednom godišnje na web-stranici Instituta. On-line pretraživanje programa rada dostupno je na web-stranicama Instituta: http://www.bas.gov.ba/tc/work_programme.php. Bosanskohercegovački standardi se pripremaju u skladu s Pravilnikom o proceduri pripremanja, donošenja i objavljivanja bosanskohercegovačkih standarda („Službeni glasnik BiH“ br.
    [Show full text]