TELSTRA M2M CERTIFIED DEVICES AND MODULES
Listed below are Wireless Embedded Modules certified for use on the Telstra Mobile Network. The listing is certified to Telstra guidelines. This includes RCM and ACMA technical standards and is subject to the Telstra M2M Device Certification Program. For further information, please email [email protected]
Certified embedded modules
Vendor Model Number Type Network Support
Gemalto EHS6 REV2/3 Embedded module 3G
Gemalto PHS8-P / PH8-P Embedded module 3G
Huawei MU709s-6p Embedded module 3G
Huawei ME906s-128 Embedded module 4G + 3G
Sierra Wireless MC7304/5 Embedded module 4G + 3G
Sierra Wireless EM7305 Embedded module 4G + 3G
Sierra Wireless MC8704/5 Embedded module 3G
Sierra Wireless HL8548 (-G) Embedded module 3G
Telit HE910 (DG/-D) Embedded module 3G
Telit HE910EUx Embedded module 3G
u-blox Lisa-U200 Embedded module 3G
Module roadmap These modules align with Telstra’s network roadmap and will be certified by June 2016.
Vendor Model Number Type Network Support
Sierra Wireless HL7549 Embedded module 4G only
Sierra Wireless MC7430/EM7430 Embedded module 4G + 3G
u-blox TOBY-L280 /MPCI-L280 Embedded module 4G + 3G
Telit LE910-AU V2 Embedded module 4G only
• Telstra recommends 4G & 3G enabled devices or 4G only devices (with no 3G fallback). • For 3G devices, Telstra strongly recommends HSPA+ capable devices as these devices offer the best experience (R99 only capable devices are not recommended). • Telstra has strong interest in lower LTE category devices CAT1/0/M for M2M/IoT industry, and is currently investigating rolling out support for those devices. • All module and devices certified need to support remote firmware upgrade capability. • Regarding radio band support, Telstra’s major 4G bands are band 3, 7 & 28, and major 3G bands are band 5 & 1.
™ and ® are trade marks and registered trade marks of Telstra Corporation Limited, ABN 33 051 775 556.
G157 NOV15