Powersports and Small Engine Repair Program (PSER) Book and Tool List

Total Page：16

File Type：pdf, Size：1020Kb

Powersports and Small Engine Repair Program (PSER) Book and Tool List BOOKS: Modern Motorcycle Technology, 3rd Edition. Edward Abdo (ISBN-13: 978-1-305-49745-0) Modern Motorcycle Technology: Student Skill Guide, 3rd Edition. Michael Ross (ISBN-13:978-1-305- 49748-1 Miscellaneous supplies (3-ring binder, notebook paper, pens, pencils, Hi-Liter) Three work shirts with CWI logo and students name in block lettering. Leather work shoes or boots with oil/slip resistant soles *APPROXIMATE TOTAL COST OF BOOKS, SUPPLIES AND TOOLS, ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTE: THIS COURSE REQUIRES EXTENSIVE COMPUTER USE. STUDENTS WILL NEED TO HAVE ACCESS TO COMPUTERS FOR, BUT NOT LIMITED TO, University of Polaris, BRP Training Institute, Stihl VoTech, and other Powersports and Small Engine manufacturer websites. FULL ACCESS TO COMPUTERS AND THE INTERNET ARE INDUSTRY STANDARDS AND VITAL FOR EVERY DAY EMPLOYMENT. *DO NOT PURCHASE TOOLS UNTIL AFTER THE FIRST DAY OF CLASS. Tool List PSER 3/8" drive ratchet 1/4" drive ratchet ½” Drive breaker bar 3/8" drive extension set 1/4" drive extension set Combination wrench set (Metric) 14 pc. 8mm-22mm Combination wrench set 15pc 1/4 – 3/4 3/8" socket set (Metric) 3/8" socket set (SAE) 1/4" socket set (Metric) 1/4" socket set (SAE) Screwdriver Set Plier Set (4-PC) Locking Plier Set (needle nose and standard) Hand impact driver set 1/4" torque wrench (1-100 in/lbs) – Optional 3/8" torque wrench (5-100 ft/lbs) Pry bar set Ball peen hammer (16oz & 24oz) Dead blow hammer (24oz) Snap ring plier set – Optional Gasket scraper Digital Volt Meter/Multimeter (Fluke 115 or Powerprobe PPDMM) Soldering gun kit – Optional Feeler Gauges (.0015-.030) Hook and pick set Flashlight Compression test kit (Powersports) - Optional Leakdown test kit - Optional Genius G3500 battery charger- Optional Wire stripper/crimper pliers Tape measure metric and standard (5M/16FT) Hacksaw Adjustable wrench set (8”& 12”) Mightyvac test/bleeding kit MV8500 Drill bit set 1/16 - 1/2 Snap punch Inspection mirror Hose pinch pliers set Impact sockets set (Metric & SAE, ¼”) Impact socket set (Metric and SAE, 3/8) 3/8" Pneumatic impact driver ¼” hex cordless impact driver ½ Cordless drill Hex and Torx bit set Pin punch set Pneumatic angle die grinder (incl. surface prep discs) – Optional Push pin pliers Oil filter socket set or single adjustable Rubber strap wrench (2-PC small and large) Extension magnet Blow gun (rubber tip) Tire pressure gauges (3-75 PSI) (0-15 PSI) Digital Calipers Vessel JIS 3-PC screwdriver set Grey Pneumatic 3/8” x 1/2” impact socket adapter Tool box or cart (Limit 42" wide) .

Copy Link

Recommended publications

View Our Welding Kit Catalog
PARTSMASTER WILL KEEP YOU RUNNING MILITARY CATALOG MILITARY OPERATIONS DEPLOYMENT READY SOLUTIONS • Partsmaster sells to the Army, Navy, Air Force, Marines, and National Guard. • Partsmaster military solutions are created by veterans. • Partsmaster hires experienced veterans to help grow the expanding military business. Rob Ramsey Stan Blitz Director of Military Accounts Army Account Manager Chief Warrant Officer 4, Retired Chief Warrant Officer 3, Retired US Army US Army Ray Larry Channel Manager Sergeant First Class, Retired US Army PARTSMASTER MAINTENANCE REPAIR OPERATING SUPPLY Partsmaster is a specialty MRO (Maintenance, Repair and Operating Supply) company dedicated to making our customers’ work easier. Our superior products are developed with a focus on increased productivity, asset longevity, safer user experience, and environmental responsibility. Partsmaster sells industrial maintenance supplies for welding, concrete repairs, specialty abrasives, fasteners and hardware, hand tools and cutting tools. Partsmaster was established in 1968 as a division of NCH Corporation, a global leader in industrial and commercial maintenance products and services since 1919. NCH has over 8,000 employees, with offices and manufacturing plants located on five continents. NCH is relied upon by companies in over 50 countries to solve maintenance problems with the most innovative and effective products and services. NCH GLOBAL NORTH AMERICA EUROPE COVERAGE 2 COUNTRIES 26 COUNTRIES 1,133 SALES ASSOCIATES 2,134 SALES ASSOCIATES • Founded in 1919 • Family
[Show full text]
Big Boys Toys
ID # Qty. Description 1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L100 3 1 MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 STANDS 8 1 HYDRAULIC JACK 9 1 TROLLEY HYDRAULIC JACK 10 1 1 1/2 TON JACK 11 1 PAIR OF JACK STANDS 12 1 PAIR OF JACK STANDS 13 1 PAIR OF JACK STANDS 14 1 PAIR OF JACK STANDS 15 1 BOOMERATOR 16 1 WERNER 6FT ALUM. LADDER 17 1 VICE 18 1 FRYER W/ POT AND ASSEC. 19 1 HUSQVARNA CHAINSAW 20 1 DELTA BENCH GRINDER 21 1 TRIMMER 22 1 TRIMMER 23 1 ECHO PB-500T BACK PACK BLOWER 24 1 BURNER W/POT 25 1 HEATER TOP FOR PROPANE TANK 26 1 COME-ALONG 27 1 WORK LAMP 28 1 LIGHT 29 1 8FT LADDER 30 1 BAND SAW 31 1 METAL TRASHCAN W/ SEEDER&SEED 32 1 BATTERY CHARGER 33 1 RED HUSKY TOOL BOX 34 1 BLUE TOOL CHEST 35 1 6GAL SHOP VAC 36 1 ROLLING TABLE 37 1 TRUNK ON WHEELS 38 1 CROUP OF 3 GREEN CHAIRS 39 1 ROLLING CART 40 1 BLK & DECKER WORKMATE BENCH 41 1 WEBER GRILL 42 1 ALUMINUM RAMPS 43 1 DAMPSON EXT LADDER - FIBERGLASS 44 1 ALUM. EXT. LADDER 1 10/13/2017 ID # Qty. Description 45 1 GROUP OF GREEN OUTDOOR CHAIRS 46 1 GROUP OF OUTDOOR CHAIRS 47 1 GROUP OF OUTDOOR FURNITURE 48 1 VINTAGE OUTDOOR GLIDER 49 1 VINTAGE OUTDOOR GLIDER 50 1 TOTE OF SPRAY PAINT 51 1 BOX LOT - TAPE MEASURES & LEVELS 52 1 BOX LOT - HITCH PINS 53 1 BOX LOT - CAR FUSES 54 1 BOX LOT - C CLAMPS 55 1 BOX LOT - SCREWDRIVERS 56 1 BOX LOT - SOCKETS 57 1 BOX LOT - GLOVES & BATTERIES 58 1 BOX LOT - FITTINGS & GLOVES 59 1 BOX LOT - ZIP TIES 60 1 BLK & DECKER SANDER 61 1 BOX LOT - ADJUSTABLE TOOLS 62 1 BOX LOT - SNIPS, PLIERS 63 1 BOX LOT
[Show full text]
California Agricultural Mechanics Tool and Materials Identification Manual 2014
California Agricultural Mechanics Tool and Materials Identification Manual 2014 Copyright 2014 Manual is compiled and maintained by Michael Spiess at California State University, Chico based on the 2005 manual with changes adopted by CATA June, 2013 and approved by the ad hoc committee. New tools were added and descriptions updated. Tool names were updated to reflect current industry names. New high resolution images were added as available. Some tools have been moved to different sections. The manual and associated formats are generated with an Access database that can produce custom lists, PowerPoint presentations, and multiple choice tests. The entire application and image files are available for download at: http://ag.csuchico.edu/agmech. This manual and associated formats may be used free of charge for instructional purposes and cannot be resold. California Ag Mechanics CDE Tool and Material ID Table of Contents Group Category Page Common Tools Axes 1 Pliers 1 Punches 2 Screwdrivers 2 Wrenches 3 Bars 6 Brushes 6 Vises 7 Clamps 8 Shovels, Rakes, Picks, and Posthole Diggers 10 Miscellaneous 10 Common Power Tools 10 Measuring, Layout, and Surveying Measuring And Marking Tools 13 Surveying Tools 15 Fasteners Bolts 18 Nuts 19 Washers 19 Screws 20 Nails 21 Miscellaneous Fasteners 23 Rivets 23 Hardware Hinges 25 Fencing And Supplies 25 Springs 27 Rope and Chain Chains, Lashing Straps, and Accessories 28 Rope 29 Knots, Hitches, and Splices 30 Metal Working Metals 31 Boring Tools (Metal) 33 Chisels 34 Hammers (Metal) 35 Files, Threading,
[Show full text]
Studio Inventory - Woodturning and Woodworking
Studio Inventory - Woodturning and Woodworking Lathes 4 Powermatic 3520B Lathes Powermatic 4224 Lathe Robust American Beauty Lathe One-Way 2436 Lathe (Instructor Demo Lathe) 2 One-Way Lathes Nichols Lathe 3 Vicmarc Lathe 3 Stubby Lathes Klein Lathe Lathe tool kits include: Wrench Knock-out bar Small Tool Rest Large Tool Rest 3” Faceplate 6” Faceplate Four-pronged Drive Spur One-Way Live Center with knock-out bar Large Cone Small Cone One-Way stronghold chuck Chunk Key Woodworm Screw Aror Screw Chuck ½” Drill Chuck w/ chuck key Face Shield Double-ended calipers Cabinet Key Other Machines in Woodturning Studio: Bench Grinder Grinding Jigs Wolverine Delta 20” Drill Press Powermatic 20” Bandsaw Microwave for steaming Machine Room Makita V.S. Plunge Router Powermatic 21” Planer SCMI 16” Jointer Delta Radial Arm Saw JDS Multi-Router Veritas Router Table with fence system Excalibur Sliding Table Conover Lathe Porta Cable Router General 20” Bandsaw/Resaw Delta Edge Sander Delta Belt / Disc Sander Max Spindle Sander Delta 14” Bandsaw Jet 18” Drill Press Delta Tenoning Jog Spindle Adapter 33 xs Bill Johnson Hollowing Tool - Large Bill Johnson Hollowing Tool - Small Hollowing Tool Steady Rest Bedan Tool - Large Bedan Tool - Small Spindle Adapter - 1¼ - 8 x 33 Lyle Janieson Boring Set-up Lynn Hull Spinning Tool Sorby Version on the Stewart Tool Jet Thickness Sander Delta Table Saw with Biesemeyer Fence Delta 16 ½” Drill Press Makita Miter Saw 12” Dewalt 12” Compound Miter Saw General 10” Table Saw Rockwell 8” Jointer Powermatic Mortiser Shop Smith
[Show full text]
General Sheet Metal Shopwork
DOCUMENT RESUME ED 231 427 JC 830 237 AUTHOR Bolin, William Everet; Orsak, Charles G.', Jr. TITLE Solar Energy: Materials, Materials Handling, and Fabrication Processes: Student Material. First Edition. INSTITUTION Navarro Coll., Corsicana, Tex. SPONS AGENCY National Science Foundation, Washington, D.C. PUB DATE 82 NOTE 447p.; For related documents, see JC 830 235-240. Materials developed in consortium with North Lake College, Brevard Community College, Cerro Coso Community College, and Malaspina College. PUB TYPE Guides - Non-Classroom Use (0554 EDRS PRICE MF01/PC18 Plus Postage. DESCRIPTORS Carpentry; Class Activities; Community Colleges; *Construction (Process); Electrical Systems; *Energy Occupations; Equipment; Glass; Measurement; Measurement Equipment; Plumbing; Power Technology; Safety; Safety'EducationI Sheet Metal Work; *Solar Energy; Technical Education; Two Year Colleges;' Welding IDENTIFIERS Insulation; Soldering ABSTRACT Detigned fOr student use in "Materials, Materials Handling, and Fagrication Processes," one of 11 courses in a 2-year associate degree program in solar technology, this_manual provides readings, exercises, worksheets, bibliographies, an& illustrations .for,13 courbe moduleg. The manual, which corresponds to an instructor gbide for the same course, covervt4Opllowing topics: (1), general shop safety; (2) units of measuringi.,aAd measuring devices; (3) hand tools/power tools and fasteners; 04'4welding; (5) carpentry; (6) sheet metal; (7) roofing, flashingy ana pOch pans; (8) soldering; (9) piping practices; cloy glazing materls; (11) material coatings and materials compatability; (12) insulation; and (13) electridal practices. (AIM) *********************************************************************** Reproductions supplied by EDRS are the best that can be made' * from the arigina.1 document. *********************************************************************** Co lomme-- MATERIALS, MATERIALS HANDLING AND FABRICATION PROCESSES Student Materia I rot "PERMISSION TO REPRODUU THIS MATERIAL HAS BEEN GRANTED BY C.G.
[Show full text]
Automated Property System Article Codes Article Code Category
AUTOMATED PROPERTY SYSTEM ARTICLE CODES ARTICLE CODE CATEGORY BRACELET BRACEL A* BROOCH, PIN PIN A* BUCKLE BUCKLE A* CHARM, JEWELRY CHARM A* CUFF LINKS C LINK A* EARRINGS EARRIN A* GEMS GEMS A* NECKLACE NECKLA A* PENDANT/LOCKET PENDAN A* PIN, BROOCH PIN A* RING RING A* WATCH WATCH A* BICYCLE SHOCKS SHOCKS B BOY 1 SPEED BIKE B01 B BOY 2 SPEED BIKE B02 B BOY 3 SPEED BIKE B03 B BOY 4 SPEED BIKE B04 B BOY 5 SPEED BIKE B05 B BOY 6 SPEED BIKE B06 B BOY 7 SPEED BIKE B07 B BOY 8 SPEED BIKE B08 B BOY 9 SPEED BIKE B09 B BOY 10 SPEED BIKE B10 B BOY 11 SPEED BIKE B11 B BOY 12 SPEED BIKE B12 B BOY 13 SPEED BIKE B13 B JUNE 2009 AUTOMATED PROPERTY SYSTEM ARTICLE CODES ARTICLE CODE CATEGORY BOY 14 SPEED BIKE B14 B BOY 15 SPEED BIKE B15 B BOY 16 SPEED BIKE B16 B BOY 17 SPEED BIKE B17 B BOY 18 SPEED BIKE B18 B BOY 19 SPEED BIKE B19 B BOY 20 SPEED BIKE B20 B BOY 21 SPEED BIKE B21 B BOY 22 SPEED BIKE B22 B BOY 23 SPEED BIKE B23 B BOY 24 SPEED BIKE B24 B BOY 26 SPEED BIKE B26 B BOY 27 SPEED BIKE B27 B BOY 28 SPEED BIKE B28 B BOY 30 SPEED BIKE B30 B BOY 32 SPEED BIKE B32 B BOY 36 SPEED BIKE B36 B GIRL 1 SPEED BIKE G01 B GIRL 2 SPEED BIKE G02 B GIRL 3 SPEED BIKE G03 B GIRL 4 SPEED BIKE G04 B GIRL 5 SPEED BIKE G05 B GIRL 6 SPEED BIKE G06 B GIRL 7 SPEED BIKE G07 B GIRL 8 SPEED BIKE G08 B GIRL 10 SPEED BIKE G10 B GIRL 12 SPEED BIKE G12 B JUNE 2009 AUTOMATED PROPERTY SYSTEM ARTICLE CODES ARTICLE CODE CATEGORY GIRL 15 SPEED BIKE G15 B GIRL 16 SPEED BIKE G16 B GIRL 18 SPEED BIKE G18 B GIRL 19 SPEED BIKE G19 B GIRL 20 SPEED BIKE G20 B GIRL 21 SPEED BIKE G21 B GIRL
[Show full text]
3D Shop Hand Tools for Checkout
Check-out Tools Name Amount Location Pneumatic Dremel 2 Check out locker Electric Dremel 5 Check out locker Bosch 1/4 Sheet Sander 4 Check out locker Dynabrade 5" Orbital Sander 4 Check out locker Milwaukee 5" Hook and Loop Sander 1 Check out locker Bosch 4-1/2" Angle Grinder 4 Check out locker Husky 1/4" Right Angle Die Grinder 3 Check out locker Husky 1/4" Straight Die Grinder 2 Check out locker Porter Cable 4" × 24" Belt Sander 1 Check out locker Porter Cable 3" × 21" Belt Sander 1 Check out locker 1/2" Drill 1 Check out locker Milwaukee 3/8" Drill 2 Check out locker Dewalt Biscuit Joiner 2 Check out locker Porter Cable Sawzall 1 Check out locker Pneumatic Riveter 1 Check out locker Makita 7-1/4" Circular Saw 1 Check out locker Irwin 41 piece Tap and Die Set 1 Check out locker Bosch Jigsaw 2 Check out locker Bosch Trim Router 2 Check out locker Poter Cable D Handle Router 2 Check out locker Cordless Drill 6 Check out locker Milwaukee 13 pc Holesaw Kit - wood only 1 Check out locker Lenox 17 pc Holesaw Kit - metal only 1 Check out locker Porter Cable 1 3/8" 23 Ga. Pin Nailer 1 Check out locker Porter Cable 2" 18 Ga. Nailer 4 Check out locker Porter Cable 2-1/2" 16 Ga. Nailer 3 Check out locker Porter Cable 1-1/2" 18 Ga. Narrow Crown Stapler 1 Check out locker Porter Cable 1" 18 Ga. Narrow Crown Stapler 1 Check out locker Paslode 1/2" 16 Ga.
[Show full text]
CASS-Tools-Library.Pdf
CASS Tools Library Carpentry and Woodworking • Awl • Bars (cat's paw, crowbar, pry bar, ripping chisel, tack puller) • Butt marker (3 1/2" & 4") • Cabinet scraper • Chalk line • Chisels, gouges & parting tools • Dado set • Door installation kit • Doweling jig • Drills • Gutter cleaner • Hammers (brick, drywall, ballpeen, dead-blow, framing, mallets, shingle hatchet, sledge, curved claw, tack) • Hinge Template • Levels (torpedo, 2', 3', 4', 6', laser) • Marking gauge • Measuring wheel • Nail puller, nail set • Planes (block, bench, spokeshave, rabbet) • Roofing spades (shingle remover) • Rasps (surform tool) • Saws (back, compass, coping, crosscut, hacksaw, jab, keyhole, miter [with box], rod, shortcut) • Screwdrivers (off-set, Phillips, Robertson, slotted, Torx, Yankee) • Screw extractor & drill bit set • Squares (combination, rafter, carpenter's, Tri-square, Universal square) • Stapler, tack hammer • Stud finders (stud sensor) • Tape measure • Water level Clamps • 2-Way Edging Clamp • Assembly Square • Angle clamp • Bar clamp 1 • C-clamp • Cabinet clamp • Edge clamp • Hand screw clamp • Quick grip clamp/spreader • Sliding arm clamp • Spring clamp • Steel pipe clamps • Vise grips Concrete and Masonry • Brick hammer, joiner, trowel • Bull float, magnesium • Cement finishing tools (edger, float, groover, hawk, joiner, trowels, tuck pointer) • Cold chisels • Concrete Cutting Saw* • Dust pump (blower for cement dust) • Fresno trowel (with handles) • Leaf blower* • Mason's layout tools (line winder, stretchers, blocks) • Mixing paddle • Mortar
[Show full text]
3D $7 793 SO 033 654 ROTE= Lindberg, Andrew; and Others Rints I:Aerials and Fabrication Methods I
Docusist assess 3D $7 793 SO 033 654 ROTE= Lindberg, Andrew; And Others rints I:aerials and Fabrication Methods I. A Study Guide o the Scieace and laginuering Technician curriculum. INST1TOTION Saint Louis Coamunity Coll. at Florissant Valley, No. SPONS AGENCY National Science Foundation, \Washington, D.C. POE DATE 76 __Gam* NSF-GI-3376; NSF-NES76 -22284 -101; NSF-SED77 -17935 110T1 1314.; For related documents, see SE 033 647-657. Not available in paper copy due to copyright restrictions. Contains occasional aarginal AVAILABLE FROM Alati nal Science Teachers Association, 17 Conn icut Ave., N.W., Washington, DC 2000 irate for c zrect price). EDIS* PR 0101 Plus Postage." PC Sot Available from IDES. DESCRIPTORS Associate Degrees; *College Science; Engineering. Education; Rand Tools; *Instructional Materials; In...erdisciplinary-Approash; Manufacturing Industry; Metric Slates: *Postsecondary Education;- Science, Course Iaprovesent Projects; *Technical Education; *Tradeand Industrial Education _*science and Engineering Technician Curriculum IIDENTISINRS 6 A4STRACT This study guide is part of a curricula' entitled . 4 Sciencend Engineering Technician (SET) Curricular, a programof studies soh integrates elesents from thedisciplines of chemistry, physics. mathematics; aechaaical technclogy, andelectronic tecbsology. The purpose of this national. curd:casedevelopment project vasyto provide a fraaesurk fortraining technicians LI the n8of +ecironicinstruments and theiriapplipatius. This guide is designed to beused,as a supplesint to 4manufacturing processes text which deals with materials properties, heattreatment, and plastics. skills , Training La materials and fabrication methods, and in those which are useful in a technical laboratory environient, areprovided. The following topics are included in the/ text: (1)measurement; (2-) electrical fabrication; (3) hand tools; f41.) power hand tools; (5) power bench tools; and (6) metal fabricaon.
[Show full text]
Rental Department
RENTAL DEPARTMENT • 4 Hour Rate = Return within 4 hours of renting • Weekday “Over Night” rate = 4 Hour rate (pick up after 4:00 pm, return the following morning by 9:00 am • Day Rate = Over 4 hours up to 24 hours (Max 8 hours on machine) • Weekly Rates = Day Rate x 4 • Monthly Rates = Weekly Rate x 3 (Long Term rates available – please inquire) Weekend Equipment Rates are: Friday 4:00 pm to Monday 9:00 am = Day Rate x 2 Saturday to Monday 9:00 am = Day Rate x 1.5 Saturday 3:00 pm to Monday 9:00 am = Same as Day Rate Weekend Heavy Equipment Rates are: Saturday till Monday 9:00 am = Same as Day Rate (up to 8 hours on meter) • Delivery and Pick Up Service is Available • Rates Do Not Include Fuel, Delivery, Pick Up, or Cleaning Charges • Equipment Must Be Returned CLEAN and FUELED • Customer is Responsible for Damage to Equipment. • Valid WA State ID or Military ID is Required • Deposit Required: Credit Card (American Express, VISA, MC or Discover) Debit Card w/ MC or VISA logo Westside Charge Account PRICES AND AVAILABILITY SUBJECT TO CHANGE WITHOUT NOTICE AS OF – APRIL 2018 PLEASE CALL FOR A RESERVATION OR TO DETERMINE AVAILABILITY 360-354-5617 RENTAL ITEM DESCRIPTION 4 HR DAY RENTAL AIR COMPRESSORS AIR COMPRESSOR 185 CFM (Tow Behind) 65.00 90.00 AIR COMPRESSOR 5.5HP 9.0 CFM (Electric or Gas) 25.00 35.00 AIR COMPRESSOR 2.5 gallon 3.5 CFM 90 PSI 20.00 25.00 AIR COMPRESSOR HOSE 3/4X50 feet 9.00 9.00 AIR COMPRESSOR HOSE 3/8X50 feet 8.00 8.00 BOLT CUTTERS BOLT CUTTER 24" 8.00 13.00 CARPET CLEANERS AND TOOLS CARPET CLEANER (cleaning solution
[Show full text]
For the 4-H Scientist
IDAHO Agricultural Bulletin 416 Extension Service January 1964 T-2 for the 4-H scientist. Safety Uses __,·Economy DIVISION II 4-H ELECTRIC 0 UNIVERSITY OF IDAHO College of Agriculture 4-H Electric, Division II TABLE OF CONTENTS Lesson Credit Page Number Title Points Number 21 Make a Test Lamp .................................................. 3 1 22 Know Your Iron-The Modern Hand Iron ........................................... 2 3 23 An Electric Game You Can Build ......................... ................................. 2 6 24 Food Hot on the Spot ···································································-········· . 4 10 25 Selecting the Right Motor .. ....... .... ...... ..................... .. ...................... 3 14 26 Good Electrical Connections - Learn How to Splice and Solder ........ 5 17 27 Replacing Switches and Outlets ......... .. .. .. ... .. .. ................ 4 21 28 Let's Learn About Heat Lamps- Make a Portable Heat Lamp .... 2 24 29 Make Your Horsepower Portable ............. ............. ... 2 26 30 Saving Steps With Switches -How to Use 3-Way and 4-Way Switches .. ...................... ............ .... ... .. ............ ..... 4 29 31 Protect Your Motors - What and How to Do It ...... ... .. ... ... 3 33 32 Portable Electricity - Cells and Batteries- How They Work, How to Care for Them ...... ... .... .. .. ............. .. ...... .. ... 3 37 33 A Bright Idea - Make a Study Lamp ...................................................... 4 41 34 Special Delivery Energy ....... -...................................................................
[Show full text]
List of Tools
Official Tools and Materials Identification List Revised 2017 Instructions: Tools/Materials will be numbered 1-40. The contestant is to bubble in the number next to the correct tool on the scantron SCORE _______ (No. correct multiplied by 2) Contestant Number___________________ Contestant Name_____________________________ List of Tools ________100- 45° pipe elbow ________146-Duplex receptacle ________101- 90° pipe elbow ________147-Dust mask ________102- 90° street elbow ________148-Ear tagger ________103- Adjustable wrench ________149-Electrical multimeter ________104- Allen wrench ________150-Emery dresser ________105- Aviation snips ________151-End cutting nippers ________106- Ball pein hammer ________152-Expansion shield ________107- Bar clamp ________153-Extension ________108- Bent nose pliers ________154-Eye bolt ________109- Bolt cutters ________155-Fence pliers ________110-Bolt die ________156-Fence staple ________111-Bolt die stock ________157-File card ________112-Bolt tap ________158-Finishing nail ________113-Box end wrench ________159-Flaring tool ________114-Brick jointer ________160-Flathead stove bolt ________115-Brick trowel ________161-Flathead wood screw ________116-Bulb planter ________162-Framing square ________117-Bush axe ________163-Fuse puller ________118-Butt hinge ________164-Gate valve ________119-C clamp ________165-Glass cutter ________120-Carriage bolt ________166-Grafting tool ________121-Castrator ________167-Grease gun ________122-Center punch ________168-Groove joint pliers ________123-Chain saw file
[Show full text]