DOCSLIB.ORG

Rental Department

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Rental Department RENTAL DEPARTMENT • 4 Hour Rate = Return within 4 hours of renting • Weekday “Over Night” rate = 4 Hour rate (pick up after 4:00 pm, return the following morning by 9:00 am • Day Rate = Over 4 hours up to 24 hours (Max 8 hours on machine) • Weekly Rates = Day Rate x 4 • Monthly Rates = Weekly Rate x 3 (Long Term rates available – please inquire) Weekend Equipment Rates are: Friday 4:00 pm to Monday 9:00 am = Day Rate x 2 Saturday to Monday 9:00 am = Day Rate x 1.5 Saturday 3:00 pm to Monday 9:00 am = Same as Day Rate Weekend Heavy Equipment Rates are: Saturday till Monday 9:00 am = Same as Day Rate (up to 8 hours on meter) • Delivery and Pick Up Service is Available • Rates Do Not Include Fuel, Delivery, Pick Up, or Cleaning Charges • Equipment Must Be Returned CLEAN and FUELED • Customer is Responsible for Damage to Equipment. • Valid WA State ID or Military ID is Required • Deposit Required: Credit Card (American Express, VISA, MC or Discover) Debit Card w/ MC or VISA logo Westside Charge Account PRICES AND AVAILABILITY SUBJECT TO CHANGE WITHOUT NOTICE AS OF – APRIL 2018 PLEASE CALL FOR A RESERVATION OR TO DETERMINE AVAILABILITY 360-354-5617 RENTAL ITEM DESCRIPTION 4 HR DAY RENTAL AIR COMPRESSORS AIR COMPRESSOR 185 CFM (Tow Behind) 65.00 90.00 AIR COMPRESSOR 5.5HP 9.0 CFM (Electric or Gas) 25.00 35.00 AIR COMPRESSOR 2.5 gallon 3.5 CFM 90 PSI 20.00 25.00 AIR COMPRESSOR HOSE 3/4X50 feet 9.00 9.00 AIR COMPRESSOR HOSE 3/8X50 feet 8.00 8.00 BOLT CUTTERS BOLT CUTTER 24" 8.00 13.00 CARPET CLEANERS AND TOOLS CARPET CLEANER (cleaning solution not included) 23.00 32.00 CARPET CLEANER HOST (dry carpet cleaning - product extra) 12.00 15.00 CARPET CLEANER HOT WATER (cleaning solution not included) 30.00 38.00 CARPET IRON 12.00 18.00 CARPET STAIR TOOL 8.00 10.00 CARPET STRETCHER 18.00 25.00 CARPET TOOL KNEE KICKER 12.00 15.00 CHIPPER / BRUSH TOOLS CHIPPER / BRUSH CUTTER 6" 135.00 175.00 CHIPPER / BRUSH CHIPPER SHREDDER 3" 65.00 90.00 COME ALONG COME ALONG 6 FT Two Ton 12.00 19.00 COMPACTOR COMPACTOR / JUMPING JACK 55.00 75.00 COMPACTOR / PLATE (reversible) 55.00 75.00 COMPACTOR / PLATE 55.00 75.00 CONDUIT BENDER 4 HOUR DAY CONDUIT BENDER 1/2 TO 3/4 thin wall 10.00 10.00 CONCRETE TOOLS CONCRETE HAND TOOLS / HAND TROWELS, EDGERS 5.00 8.00 CONCRETE TOOLS / REBAR CUTTER / BENDER 15.00 25.00 CONCRETE FRESNO 10.00 13.00 CONCRETE BRUSH 10.00 13.00 CONCRETE BULL FLOAT 15.00 19.00 CONCRETE BULL FLOAT HANDLES 2.00 2.00 CONCRETE KNEE BOARDS 10.00 13.00 CONCRETE TOOLS / 3 CU CONCRETE MIXER (gas) 32.00 40.00 CONCRETE TOOLS / 3 CU CONCRETE MIXER (electric) 32.00 40.00 CONCRETE TOOLS / VIBRATOR (110 volts) (exts avail = 3', 7', 10', 14') 35.00 50.00 CONCRETE TOOLS / VIBRATOR (18 volt cordless) 3ft 6in 35.00 50.00 CONCRETE TOOLS / HAND TAMPER 10.00 13.00 CONCRETE TOOLS / 36" POWER TROWEL 48.00 58.00 CONCRETE TOOLS / 46" POWER TROWEL 58.00 68.00 CONCRETE CORE DRILL (core bits extra) 48.00 68.00 CONCRETE CORE DRILL BITS (2, 3, 3.5, 4, 4.5, 5 & 6 inch available) 20.00 20.00 CONCRETE GRINDER - SURFACE WALK BEHIND 75.00 100.00 CONCRETE GRINDER - SURFACE HAND HELD 30.00 40.00 CONCRETE GRINDING DIAMOND WHEEL 7 inch (sgl, dbl, turbo) FREE FREE CONCRETE FORM STAKES - 18" 0.10 0.10 CONCRETE FORM STAKES - 24" 0.10 0.10 CONCRETE SCREED BRACKET (2x4) 0.10 0.10 CONCRETE SNAP TIE SHOES 0.05 0.05 DEHUMIDIFIERS 4 HOUR DAY DEHUMIDIFIER (123 pts per day) 35.00 45.00 DEHUMIDIFIER (240 pts per day) 45.00 55.00 DINGO DINGO TRX TRENCHER 24" 100.00 185.00 DINGO WALKING WITH TRACKS - VERMEER (attachments extra) 135.00 175.00 DINGO TX-1000 W/ TRACKS RIDE ON 135.00 175.00 DINGO WALKING WITH TRACKS - MODEL 413 (attachments extra) 90.00 140.00 DINGO TRAILER (w/ 2" ball) 25.00 40.00 DINGO ATTACHMENTS DINGO TRENCHER - VERMEER 6" X 3 FT 50.00 50.00 DINGO TRENCHER - 413 4' X 2 FT 50.00 50.00 DINGO CONCRETE BREAKER - VERMEER / TX-1000 75.00 75.00 DINGO LEVELER - 413 20.00 20.00 DINGO BUCKET - (3.5 CU FT) FREE FREE DINGO BUCKET - (4 CU FT) FREE FREE DINGO BUCKET – VERMEER ONLY (6.4 CU FT) FREE FREE DINGO ADJ FORKS – VERMEER ONLY (750LBS) 20.00 20.00 DINGO ADJ FORKS - 413 (450LBS) 20.00 20.00 DINGO POWERHEAD AUGER - 413 & 425 (inc 1 auger bit) ($75 w/o DINGO rental) 50.00 50.00 DINGO 6" AUGER - 413 ($30 without Powerhead rental) 10.00 10.00 DINGO 9" AUGER - 413 ($30 without Powerhead rental) 10.00 10.00 DINGO 12" AUGER - 413 ($30 without Powerhead rental) 10.00 10.00 DINGO 18" AUGER - VERMEER ONLY ($30 without Powerhead rental) 10.00 10.00 DINGO 30" AUGER - VERMEER ONLY ($30 without Powerhead rental) 10.00 10.00 DOLLY / PIANO / APPLIANCE MOVERS DOLLY / APPLIANCE WITH STRAP 14.00 14.00 DOLLY / PIANO 4 WHEEL 12.00 12.00 DRAIN CLEANERS 4 HOUR DAY DRAIN CLEANER ELECTRIC 1 1/4" to 3" x 75' Auto Feed 45.00 65.00 DRAIN CLEANER ELECTRIC – model C 3" to 6" x up to 104' (8” sections) 50.00 70.00 DRAIN CLEANER HAND ELECTRIC 1 1/4" to 2 1/2" x 25' 18.00 28.00 DRAIN CLEANER CLOSET AUGER 3ft 12.00 12.00 DRAIN CLEANER HAND 1/4" X 25' 15.00 18.00 DRAIN CLEANER FLAT TAPE 50FT 12.00 16.00 DRAIN CLEANER ELECTRIC JETTER 60.00 80.00 DRILLS DRILL DOOR LOCK INSTALLATION KIT 15.00 15.00 DRILL 1/2" (drill bits are extra) 15.00 18.00 ELECTRIC FLAT TAPE ELECTRIC FLAT TAPE - 50' AND 125' 12.00 12.00 EXTENSION CORDS EXTENSION CORD 100' (12GA) 16.00 16.00 EXTENSION CORD 50' (10GA) 8.00 8.00 FANS FAN / TURBO DRYER 2000 CFM (1.5 AMPS) 25.00 35.00 FAN / TURBO DRYER 1075 CFM (4.7AMPS) 25.00 35.00 FLOOR POLISHER FLOOR POLISHER 17" (175RPM) (polishing pads are extra) 22.00 30.00 GENERATORS GENERATOR 1100 WATT 40.00 50.00 GENERATOR 2800 WATT INVERTER 50.00 60.00 GENERATOR 3800 WATT INVERTER 50.00 60.00 GENERATOR 6700 WATT (electric start) 60.00 70.00 GRINDER GRINDER 4-1/2” (blades are extra) 12.00 15.00 HAMMER / JACK AND ROTARY 4 HOUR DAY HAMMER / JACK ELECTRIC 42LB (bits are extra) 30.00 45.00 HAMMER / JACK ELECTRIC 70LB (bits are extra) 50.00 65.00 HAMMER / DIGGER AIR (bits are extra) 40.00 50.00 HAMMER / JACK AIR 90 LB (bits are extra) 60.00 70.00 HAMMER ROTARY / DEMO LARGE (bits are extra) 35.00 50.00 HAMMER ROTARY / DEMO SMALL (bits are extra) 27.00 35.00 HAMMER ROTARY BITS (with Rotary Hammer rental) 8.00 8.00 HEATERS - KEROSENE, PROPANE, ELECTRIC, PATIO HEATER / KEROSENE 125,000 BTU / HR (fuel extra) 19.00 24.00 HEATER / KEROSENE 175,000 BTU / HR (fuel extra) 19.00 24.00 HEATER / PROPANE 50,000-85,000 BTU / HR (fuel extra) 20.00 26.00 HEATER/PROPANE 75,000 TO 125,000 BTU/HR (fuel extra) 19.00 24.00 HEATER / PROPANE CONVECTION 40,000-80,000 BTU /HR (fuel extra) 20.00 26.00 HEATER / ELECTRIC 30,700 BTU / HR (220 volt) 25.00 40.00 HEATER / ELECTRIC 5,100 BTU / HR (110 volt) 10.00 17.00 HEATER / OUTDOOR PATIO (PROPANE) 17,000-41,000 BTU / HR 45.00 45.00 HEAT GUN HEAT GUN AND ACCESSORIES 25.00 35.00 HEDGE TRIMMERS HEDGE TRIMMER 30" DOUBLE SIDED GAS 30.00 45.00 HEDGE TRIMMER ON POLE - 7FT DOUBLE SIDED GAS 35.00 50.00 IMPACT WRENCH IMPACT WRENCH 1/2" - ELECTRIC 20.00 25.00 INSULATION BLOWER INSULATION BLOWER 25.00 35.00 LADDERS - EXTENSION, STEP, ORCHARD 4 HOUR DAY LADDER - EXTENSTION 28 FT 18.00 26.00 LADDER - EXTENSION 32 FT 26.00 34.00 LADDER JACKS 9.00 9.00 LADDER STABILIZER (extension ladders only) 6.00 6.00 LADDER 6' STEP 16.00 16.00 LADDER 8' STEP 16.00 16.00 LADDER 10' STEP 18.00 18.00 LADDER 12' ORCHARD 22.00 22.00 LADDER 14' TWIN STEP 25.00 25.00 LAWN TOOLS LAWN BRUSH CUTTER S.P. 13 H.P 65.00 100.00 LAWN BROADCAST SPREADER 10.00 14.00 LAWN EDGER 30.00 40.00 LAWN AERATOR PLUG (2 hour rate = $35) 45.00 70.00 LAWN AERATOR PLUG TOWABLE - 48' WIDE 50.00 80.00 LAWN SLICER / SEEDER 75.00 75.00 LAWN SOD CUTTER 18" CUT (2 hour rate = $50) 70.00 90.00 LAWN THATCHER 22" POWER (2 hour rate = $35) 45.00 65.00 LAWN TOOLS / DIGGER BAR 10.00 10.00 LAWN TOOLS / LOPPING SHEARS 12.00 12.00 LAWN TOOLS / POLE TREE PRUNER up to 18 ft 12.00 12.00 LAWN TOOLS / BRUSH TRIMMER 38.00 50.00 LAWN VACCUM SELF PROPELLED 60.00 80.00 LAWN TOOLS / STRING TRIMMER 38.00 50.00 LAWN ROLLER 18X36" 360 LBS / TOW 15.00 20.00 LAWN ROLLER 18X24" 250 LBS / PULL 10.00 15.00 LEAF BLOWER (BACK PACK) 35.00 50.00 LEVELS 4 HOUR DAY LEVEL 48" 10.00 10.00 LEVEL / LASER SELF LEVELING (with tripod and measure stick) 40.00 55.00 LEVEL / TRANSIT (with tripod and measure stick) 25.00 35.00 LIFT LIFT, MATERIAL (BEAM) 30.00 45.00 LIGHTING TOWER LIGHTING / LIGHT TOWER 1000W, 360 degree, glare free 40.00 60.00 LOG SPLITTER LOG SPLITTER 22 TON 50.00 75.00 LOG SPLITTER 27 TON 50.00 75.00 MAGNET FLOOR SWEEPER MAGNET FLOOR SWEEPER - 24" 12.00 12.00 METAL DETECTOR METAL DETECTOR 15.00 25.00 METAL SHEARS METAL SHEARS 18 GAUGE 15.00 25.00 MOISTURE METER MOISTURE METER 8.00 12.00 NAILERS NAILER - 1 5/8" BRAD (nails are extra) 15.00 22.00 NAILER / FINISH (nails are extra) 18.00 28.00 NAILER / FLOOR (nails are extra) 25.00 38.00 NAILER / FRAMING 3 1/4" ROUND HEAD (nails are extra) 22.00 32.00 NAILER / ROOFING COIL (nails are extra) 25.00 35.00 NAILER / SIDING AND FENCING (nails are extra) 25.00 35.00 NAILER POWDER ACTUATED TOOL (nails and cartridges are extra) 25.00 30.00 NIBBLER - SNAPPER HARDING CUTTER 4 HOUR DAY NIBBLER - SNAPPER HARDING CUTTER 25.00 35.00 PAINTING EQUIPMENT PAINTING EQUIPMENT, HI VOLUME / LO PRESSURE (finish sprayer) 80.00 80.00 PAINTING EQUIPMENT AIRLESS SPRAYER 80.00 80.00 PAINTING EQUIPMENT - TEXTURE SPRAYER 50.00 50.00 PALLET JACK PALLET JACK - HYDRAULIC 5500 LB CAPACITY 30.00 50.00 PIPE TOOLS PIPE CUTTER 1' - 2' HAND 15.00 15.00 PIPE THREADER 1/2' - 2" HAND 15.00 15.00 PIPE THREADER ELECTRIC 1/2" - 2" HAND HELD 45.00 75.00 PIPE VISE TRI-STAND 1/8" - 6" 16.00 16.00 PIPE WRENCH PIPE WRENCH 36" 14.00 14.00 PLANERS PLANER HAND HELD ELECTRIC - 3 1/4" 20.00
Load more

Recommended publications
  • Powersports and Small Engine Repair Program (PSER) Book and Tool List
    Powersports and Small Engine Repair Program (PSER) Book and Tool List BOOKS: Modern Motorcycle Technology, 3rd Edition. Edward Abdo (ISBN-13: 978-1-305-49745-0) Modern Motorcycle Technology: Student Skill Guide, 3rd Edition. Michael Ross (ISBN-13:978-1-305- 49748-1 Miscellaneous supplies (3-ring binder, notebook paper, pens, pencils, Hi-Liter) Three work shirts with CWI logo and students name in block lettering. Leather work shoes or boots with oil/slip resistant soles *APPROXIMATE TOTAL COST OF BOOKS, SUPPLIES AND TOOLS, ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTE: THIS COURSE REQUIRES EXTENSIVE COMPUTER USE. STUDENTS WILL NEED TO HAVE ACCESS TO COMPUTERS FOR, BUT NOT LIMITED TO, University of Polaris, BRP Training Institute, Stihl VoTech, and other Powersports and Small Engine manufacturer websites. FULL ACCESS TO COMPUTERS AND THE INTERNET ARE INDUSTRY STANDARDS AND VITAL FOR EVERY DAY EMPLOYMENT. *DO NOT PURCHASE TOOLS UNTIL AFTER THE FIRST DAY OF CLASS. Tool List PSER 3/8" drive ratchet 1/4" drive ratchet ½” Drive breaker bar 3/8" drive extension set 1/4" drive extension set Combination wrench set (Metric) 14 pc. 8mm-22mm Combination wrench set 15pc 1/4 – 3/4 3/8" socket set (Metric) 3/8" socket set (SAE) 1/4" socket set (Metric) 1/4" socket set (SAE) Screwdriver Set Plier Set (4-PC) Locking Plier Set (needle nose and standard) Hand impact driver set 1/4" torque wrench (1-100 in/lbs) – Optional 3/8" torque wrench (5-100 ft/lbs) Pry bar set Ball peen hammer (16oz & 24oz) Dead blow hammer (24oz) Snap ring plier
    [Show full text]
  • Operator's Manual
    OPERATOR’S MANUAL MANUEL D’UTILISATION MANUAL DEL OPERADOR 18 VOLT STRING TRIMMER/EDGER 18 V TAILLE-BORDURES À LIGNE/COUPE-BORDURES 18 V RECORTADORA DE HILO/ RECORTADORA DE BORDES P2008 ACCEPTS ALL ONE+ BATTERY PACKS BATTERIES AND CHARGERS SOLD SEPARATELY COMPATIBLE AVEC TOUS LE BLOC-PILES ONE+ PILE ET CHARGEUR VENDUS SÉPARÉMENT ACEPTA TODOS LOS PAQUETES DE BATERÍAS ONE+ LAS BATERÍAS Y EL CARGADOR SE VENDEN POR SEPARADO Your trimmer/edger has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE Le taille-bordures à ligne/coupe-bordures a été conçue et fabriquée Su recortadoras de hilo/recortadora de bordes ha sido diseñada conformément à nos strictes normes de fiabilité, simplicité d’emploi y fabricada de conformidad con las estrictas normas para brindar et sécurité d’utilisation. Correctement entretenue, elle vous donnera fiabilidad, facilidad de uso y seguridad para el operador. Con el debido des années de fonctionnement robuste et sans problème. cuidado, le brindará muchos años de sólido y eficiente funcionamiento. AVERTISSEMENT : Pour réduire les risques de ADVERTENCIA: Para reducir el riesgo de lesiones, blessures, l’utilisateur doit lire et veiller à bien comprendre le el usuario debe leer y comprender el manual del operador antes manuel d’utilisation avant d’employer ce produit. de usar este producto.
    [Show full text]
  • View Our Welding Kit Catalog
    PARTSMASTER WILL KEEP YOU RUNNING MILITARY CATALOG MILITARY OPERATIONS DEPLOYMENT READY SOLUTIONS • Partsmaster sells to the Army, Navy, Air Force, Marines, and National Guard. • Partsmaster military solutions are created by veterans. • Partsmaster hires experienced veterans to help grow the expanding military business. Rob Ramsey Stan Blitz Director of Military Accounts Army Account Manager Chief Warrant Officer 4, Retired Chief Warrant Officer 3, Retired US Army US Army Ray Larry Channel Manager Sergeant First Class, Retired US Army PARTSMASTER MAINTENANCE REPAIR OPERATING SUPPLY Partsmaster is a specialty MRO (Maintenance, Repair and Operating Supply) company dedicated to making our customers’ work easier. Our superior products are developed with a focus on increased productivity, asset longevity, safer user experience, and environmental responsibility. Partsmaster sells industrial maintenance supplies for welding, concrete repairs, specialty abrasives, fasteners and hardware, hand tools and cutting tools. Partsmaster was established in 1968 as a division of NCH Corporation, a global leader in industrial and commercial maintenance products and services since 1919. NCH has over 8,000 employees, with offices and manufacturing plants located on five continents. NCH is relied upon by companies in over 50 countries to solve maintenance problems with the most innovative and effective products and services. NCH GLOBAL NORTH AMERICA EUROPE COVERAGE 2 COUNTRIES 26 COUNTRIES 1,133 SALES ASSOCIATES 2,134 SALES ASSOCIATES • Founded in 1919 • Family
    [Show full text]
  • Landscape Safety: String/Brush Trimmer
    MAFES Dawg Tracks February 7, 2011 Landscape Safety: String/Brush Trimmer String trimmers can and do save a lot of time in • String adjustment – Most models have a work around the house and in work “bump feed mechanism to refresh the line environments as well. But like all types of when needed. To refresh or replenish the line equipment, it isn’t any more efficient or for better cutting ability, gently bump the spool effective than the person who is operating it, on the ground. Centrifugal force will release safety wise and maintenance wise. more line and a small blade attached to the Following are some tips that if put to use can grass guard will automatically cut the line to make string trimming safer, more efficient and the desired length. more useful. • Completing the cutting – When you are • Wear appropriate protective gear - Wear a finished or stopping for whatever reason, safety face shield, glasses or goggles, heavy release the throttle or “on” switch. Make sure duty gloves, muff type ear protection and a that the extension cords are unplugged when dust respirator, a long sleeve shirt and long using electrical units. On gasoline powered pants. models, stop the engine with the on/off switch and for extra security disconnect the spark plug • Read the manufacturer’s instructions wire. carefully - Take the time to read the manufacturer’s instructions, especially if you • When should you not use a string trimmer - have rented or borrowed a trimmer. It is also If you encounter brush, bushes, thick a good idea to have an experienced person to shrubbery, do not attempt to cut these items, review the operating features with you.
    [Show full text]
  • Outdoor Power Equipment
    ™ OUTDOOR POWER EQUIPMENT TM ™ DRIVEN TO OUTPERFORM.TM M18 FUEL™ is engineered for the most demanding tradesmen in the world. Delivering unrivaled performance in a compact structure, all M18 FUEL™ products feature three MILWAUKEE® exclusive innovations — the POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack and REDLINK PLUS™ Intelligence Hardware and Software — that deliver unmatched power, run- time and durability. Simply put, MILWAUKEE® M18 FUEL™ Outdoor Power Equipment delivers the best combination of power, speed and run-time, outperforming high voltage platforms. POWER FASTER UP TO TO CUT THAN 150 CUTS HARDWOODS GAS PER CHARGE 1 2 POWERSTATE REDLINK PLUS BRUSHLESS INTELLIGENCE MOTOR REDLITHIUM 3 HIGH OUTPUT HD12.0 50% MORE POWER RUNS COOLER REDLITHIUM ™ HD QUIK-LOK ™ ATTACHMENT SYSTEM Multiple Attachments Powered By a Single Power Head Designed to meet the needs of landscape maintenance professionals, the QUIK-LOK™ Attachment System is a versatile outdoor power equipment system featuring multiple attachments powered by a single M18 FUEL™ Power Head. With the QUIK-LOK™ Attachment System, you have the capability to switch between multiple attachments including a string trimmer, edger, hedge trimmer and pole saw to complete a wide range of applications. Powered by M18 FUEL™, the QUIK-LOK™ Attachment System utilizes the most advanced cordless technology to deliver best-in-class power and run-time for landscaping and trade professionals, achieving instantaneous throttle response and outperforming higher voltage platforms. POWERED BY: AVAILABLE ATTACHMENTS M18 FUEL™ POWER HEAD w/ QUIK-LOK™ STRING ARTICULATING 3' ATTACHMENT TRIMMER HEDGE TRIMMER EXTENSION ATTACHMENT ATTACHMENT 49-16-2721 49-16-2717 49-16-2719 EDGER 10" POLE SAW ATTACHMENT ATTACHMENT 49-16-2718 49-16-2720 ™ STRING TRIMMER w/ QUIK-LOK ™ 2825-21ST, 2825-20ST QUIK-LOK™ ATTACHMENT CAPABLE TM 0 .
    [Show full text]
  • Big Boys Toys
    ID # Qty. Description 1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L100 3 1 MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 STANDS 8 1 HYDRAULIC JACK 9 1 TROLLEY HYDRAULIC JACK 10 1 1 1/2 TON JACK 11 1 PAIR OF JACK STANDS 12 1 PAIR OF JACK STANDS 13 1 PAIR OF JACK STANDS 14 1 PAIR OF JACK STANDS 15 1 BOOMERATOR 16 1 WERNER 6FT ALUM. LADDER 17 1 VICE 18 1 FRYER W/ POT AND ASSEC. 19 1 HUSQVARNA CHAINSAW 20 1 DELTA BENCH GRINDER 21 1 TRIMMER 22 1 TRIMMER 23 1 ECHO PB-500T BACK PACK BLOWER 24 1 BURNER W/POT 25 1 HEATER TOP FOR PROPANE TANK 26 1 COME-ALONG 27 1 WORK LAMP 28 1 LIGHT 29 1 8FT LADDER 30 1 BAND SAW 31 1 METAL TRASHCAN W/ SEEDER&SEED 32 1 BATTERY CHARGER 33 1 RED HUSKY TOOL BOX 34 1 BLUE TOOL CHEST 35 1 6GAL SHOP VAC 36 1 ROLLING TABLE 37 1 TRUNK ON WHEELS 38 1 CROUP OF 3 GREEN CHAIRS 39 1 ROLLING CART 40 1 BLK & DECKER WORKMATE BENCH 41 1 WEBER GRILL 42 1 ALUMINUM RAMPS 43 1 DAMPSON EXT LADDER - FIBERGLASS 44 1 ALUM. EXT. LADDER 1 10/13/2017 ID # Qty. Description 45 1 GROUP OF GREEN OUTDOOR CHAIRS 46 1 GROUP OF OUTDOOR CHAIRS 47 1 GROUP OF OUTDOOR FURNITURE 48 1 VINTAGE OUTDOOR GLIDER 49 1 VINTAGE OUTDOOR GLIDER 50 1 TOTE OF SPRAY PAINT 51 1 BOX LOT - TAPE MEASURES & LEVELS 52 1 BOX LOT - HITCH PINS 53 1 BOX LOT - CAR FUSES 54 1 BOX LOT - C CLAMPS 55 1 BOX LOT - SCREWDRIVERS 56 1 BOX LOT - SOCKETS 57 1 BOX LOT - GLOVES & BATTERIES 58 1 BOX LOT - FITTINGS & GLOVES 59 1 BOX LOT - ZIP TIES 60 1 BLK & DECKER SANDER 61 1 BOX LOT - ADJUSTABLE TOOLS 62 1 BOX LOT - SNIPS, PLIERS 63 1 BOX LOT
    [Show full text]
  • LAWN & Garden Equipment
    LAWN & garden equipment with US and imported components consumer tillers You don’t have to be a professional to own garden equipment that works and lasts. Our consumer tiller line is perfect for homeowners. We offer a wide array of easy to use tillers to provide you with the power and tine speed you need. Sturdiness, simplicity and ease of maintenance guaranteed, you only have to choose the model. Knowing that soil conditions and all gardeners are not alike, Maxim manufactures its tillers with options and the flexibility of a multitude of accessories. Choose your power, tine speed and attachments, then let the equipment help with the hard work of gardening. steel construction serviceable chain drive transmission ADJUSTABLE TILLING WIDTH 2-YEAR WARRANTY FOR CONSUMERS 2 MAXIM | maximmfg.com CONSUMER TILLERS heavy-duty transmission MINI MA Tiller/cultivator MTC35H MS50B MS50NB ENGINE Honda GX35, 35 cc Briggs & Stratton 750 Series, 163 cc Briggs & Stratton 550 Series, 127 cc TRANSMISSION Exclusive, Heavy-Duty Gear Drive Chain Drive (Available with Reverse) Chain Drive TINE SPEED (MAX) 250 RPM 78 RPM 78 RPM TINES Steel Forged Tines (6) Heat-Treated, Welded Slasher Tines Heat-Treated, Welded Slasher Tines TILLING WIDTH 7" to 16" 14" or 26" 14" or 26" TILLING DEPTH Up to 8" Up to 10" Up to 10" DRAG BAR Standard Standard Standard HANDLES 3/4" - .06" Thick Q195 Steel 1" - 14 Gauge Tubular Steel 1" - 14 Gauge Tubular Steel Stamped Hitch Stamped Hitch HITCH N/A with 3/8" x 1.5" Drag Stake with 3/8" x 1.5" Drag Stake 10 x 1.75 8 x 1.75 WHEELS 1.375" x 7" (for transport only) (for transport only) INCLUDED N/A N/A N/A ACCESSORIES LENGTH 47" 55" 55" WIDTH 17.25" 26" 26" HEIGHT 36.75" 36" 40" SHIPPING WEIGHT 50 lbs 135 lbs 130 lbs NEW Mini Max New to the line-up, Maxim’s Mini Max is a tiller/cultivator in one.
    [Show full text]
  • By George Kuepper and Staff at the Kerr Center for Sustainable Agriculture Kerr Center for Sustainable Agriculture 24456 Kerr Rd
    By George Kuepper and Staff at the Kerr Center for Sustainable Agriculture KERR CENTER FOR SUSTAINABLE AGRICULTURE 24456 Kerr Rd. Poteau, OK 74953 918.647.9123 phone • 918.647.8712 fax [email protected] www.kerrcenter.com Market Farming with Rotations and Cover Crops: An Organic Bio-Extensive System by George Kuepper and Staff at the Kerr Center for Sustainable Agriculture PHOTO 1. Killed cover crop mulch and transferred mulch on an heirloom tomato trial at Kerr Center’s Cannon Horticulture Plots, summer 2012. Kerr Center for Sustainable Agriculture Poteau, Oklahoma 2015 MARKET FARMING WITH ROTATIONS AND COVER CROPS: AN ORGANIC BIO-EXTENSIVE SYSTEM i Acknowledgements This publication and the work described herein were brought about by the past and present staff of the Kerr Center for Sustainable Agriculture, with the help of many student interns, over the past seven years. Throughout, we have had the vigorous support of trustees and managers, who made certain we had what we needed to succeed. A thousand thanks to all these wonderful people! We must also acknowledge the USDA’s Natural Resources Conservation Service for its generous funding of Conservation Innovation Grant Award #11-199, which supported the writing and publication of this booklet, in addition to our field work for the past three years. We are eternally grateful. ©2015 Kerr Center for Sustainable Agriculture Selections from this report may be used according to accepted fair use guidelines. Permission needed to reproduce in full or in part. Contact Maura McDermott, Communications Director, at Kerr Center for permission. Please link to this report on www.kerrcenter.com Report Editors: Maura McDermott and Wylie Harris Layout and Design by Argus DesignWorks For more information contact: Kerr Center for Sustainable Agriculture 24456 Kerr Rd.
    [Show full text]
  • California Agricultural Mechanics Tool and Materials Identification Manual 2014
    California Agricultural Mechanics Tool and Materials Identification Manual 2014 Copyright 2014 Manual is compiled and maintained by Michael Spiess at California State University, Chico based on the 2005 manual with changes adopted by CATA June, 2013 and approved by the ad hoc committee. New tools were added and descriptions updated. Tool names were updated to reflect current industry names. New high resolution images were added as available. Some tools have been moved to different sections. The manual and associated formats are generated with an Access database that can produce custom lists, PowerPoint presentations, and multiple choice tests. The entire application and image files are available for download at: http://ag.csuchico.edu/agmech. This manual and associated formats may be used free of charge for instructional purposes and cannot be resold. California Ag Mechanics CDE Tool and Material ID Table of Contents Group Category Page Common Tools Axes 1 Pliers 1 Punches 2 Screwdrivers 2 Wrenches 3 Bars 6 Brushes 6 Vises 7 Clamps 8 Shovels, Rakes, Picks, and Posthole Diggers 10 Miscellaneous 10 Common Power Tools 10 Measuring, Layout, and Surveying Measuring And Marking Tools 13 Surveying Tools 15 Fasteners Bolts 18 Nuts 19 Washers 19 Screws 20 Nails 21 Miscellaneous Fasteners 23 Rivets 23 Hardware Hinges 25 Fencing And Supplies 25 Springs 27 Rope and Chain Chains, Lashing Straps, and Accessories 28 Rope 29 Knots, Hitches, and Splices 30 Metal Working Metals 31 Boring Tools (Metal) 33 Chisels 34 Hammers (Metal) 35 Files, Threading,
    [Show full text]
  • Studio Inventory - Woodturning and Woodworking
    Studio Inventory - Woodturning and Woodworking Lathes 4 Powermatic 3520B Lathes Powermatic 4224 Lathe Robust American Beauty Lathe One-Way 2436 Lathe (Instructor Demo Lathe) 2 One-Way Lathes Nichols Lathe 3 Vicmarc Lathe 3 Stubby Lathes Klein Lathe Lathe tool kits include: Wrench Knock-out bar Small Tool Rest Large Tool Rest 3” Faceplate 6” Faceplate Four-pronged Drive Spur One-Way Live Center with knock-out bar Large Cone Small Cone One-Way stronghold chuck Chunk Key Woodworm Screw Aror Screw Chuck ½” Drill Chuck w/ chuck key Face Shield Double-ended calipers Cabinet Key Other Machines in Woodturning Studio: Bench Grinder Grinding Jigs Wolverine Delta 20” Drill Press Powermatic 20” Bandsaw Microwave for steaming Machine Room Makita V.S. Plunge Router Powermatic 21” Planer SCMI 16” Jointer Delta Radial Arm Saw JDS Multi-Router Veritas Router Table with fence system Excalibur Sliding Table Conover Lathe Porta Cable Router General 20” Bandsaw/Resaw Delta Edge Sander Delta Belt / Disc Sander Max Spindle Sander Delta 14” Bandsaw Jet 18” Drill Press Delta Tenoning Jog Spindle Adapter 33 xs Bill Johnson Hollowing Tool - Large Bill Johnson Hollowing Tool - Small Hollowing Tool Steady Rest Bedan Tool - Large Bedan Tool - Small Spindle Adapter - 1¼ - 8 x 33 Lyle Janieson Boring Set-up Lynn Hull Spinning Tool Sorby Version on the Stewart Tool Jet Thickness Sander Delta Table Saw with Biesemeyer Fence Delta 16 ½” Drill Press Makita Miter Saw 12” Dewalt 12” Compound Miter Saw General 10” Table Saw Rockwell 8” Jointer Powermatic Mortiser Shop Smith
    [Show full text]
  • 2020 Price Table Website.Xlsx
    Commercial Lawn and Garden Equipment *Prices Effective January 27, 2020 Echo Products Equipment, Battery and Charger (bundle) Program Price Incentive Funds Customer Pays* Lawn mower CLM‐58V4AH, 58V4AH battery, and 58VA charger $400 $300 $100 String trimmer CST‐58V2AHCV, 58V2AH battery, and 58VA charger $200 $150 $50 Handheld blower CPLB‐58V2AH, 58V2AH battery, and 58VA charger $184 $138 $46 Chainsaw CCS‐58V4AH, 58V4AH battery, and 58VA charger $240 $180 $60 Hedge trimmer CHT‐58V2AH, 58V2AH battery, and 58VA charger $216 $162 $54 Husqvarna Group Products Equipment, Battery and Charger (bundle) Program Price Incentive Funds Customer Pays* String trimmer 520iLX, BLi300, and QC500 $640 $480 $160 Articulated hedge trimmer 520iHE3, BLi300, and QC500 $720 $540 $180 Powered hedge trimmer 520HD60, BLi300, and QC500 $720 $540 $180 Top handle chainsaw T535iXP, BLi300, and QC500 $720 $540 $180 Leaf blower 436LiB, with backpack battery BLi950x, and QC500 $1,120 $840 $280 Quiet leaf blower 550iBTx, with backpack battery BLi950x, and QC500 $1,200 $900 $300 Pole saw 530iP4, BLi300, and QC500 $720 $540 $180 Telescopic pole saw 530iPT5, BLi300, and QC500 $800 $600 $200 Lawn mower LE121P, BLi20, and QC80 $400 $300 $100 Lawn mower self‐propelled LE221R, BLi20, and QC80 $480 $360 $120 Lawn mower robotic 315 $1,600 $1,200 $400 Lawn mower robotic 450X $2,800 $2,100 $700 Makita U.S.A Products Equipment, Battery and Charger (bundle) Program Price Incentive Funds Customer Pays* Handheld blower XBU02PT1 (includes 4 ‐ BL1850B batteries and 1 ‐ DC18RD dual port charger)
    [Show full text]
  • General Sheet Metal Shopwork
    DOCUMENT RESUME ED 231 427 JC 830 237 AUTHOR Bolin, William Everet; Orsak, Charles G.', Jr. TITLE Solar Energy: Materials, Materials Handling, and Fabrication Processes: Student Material. First Edition. INSTITUTION Navarro Coll., Corsicana, Tex. SPONS AGENCY National Science Foundation, Washington, D.C. PUB DATE 82 NOTE 447p.; For related documents, see JC 830 235-240. Materials developed in consortium with North Lake College, Brevard Community College, Cerro Coso Community College, and Malaspina College. PUB TYPE Guides - Non-Classroom Use (0554 EDRS PRICE MF01/PC18 Plus Postage. DESCRIPTORS Carpentry; Class Activities; Community Colleges; *Construction (Process); Electrical Systems; *Energy Occupations; Equipment; Glass; Measurement; Measurement Equipment; Plumbing; Power Technology; Safety; Safety'EducationI Sheet Metal Work; *Solar Energy; Technical Education; Two Year Colleges;' Welding IDENTIFIERS Insulation; Soldering ABSTRACT Detigned fOr student use in "Materials, Materials Handling, and Fagrication Processes," one of 11 courses in a 2-year associate degree program in solar technology, this_manual provides readings, exercises, worksheets, bibliographies, an& illustrations .for,13 courbe moduleg. The manual, which corresponds to an instructor gbide for the same course, covervt4Opllowing topics: (1), general shop safety; (2) units of measuringi.,aAd measuring devices; (3) hand tools/power tools and fasteners; 04'4welding; (5) carpentry; (6) sheet metal; (7) roofing, flashingy ana pOch pans; (8) soldering; (9) piping practices; cloy glazing materls; (11) material coatings and materials compatability; (12) insulation; and (13) electridal practices. (AIM) *********************************************************************** Reproductions supplied by EDRS are the best that can be made' * from the arigina.1 document. *********************************************************************** Co lomme-- MATERIALS, MATERIALS HANDLING AND FABRICATION PROCESSES Student Materia I rot "PERMISSION TO REPRODUU THIS MATERIAL HAS BEEN GRANTED BY C.G.
    [Show full text]