Santa Clara University Scholar Commons Mechanical Engineering Senior Theses Engineering Senior Theses 12-15-2014 Snowboard, Ski, and Skateboard Sensor System Application Adrien Doiron Santa Clara University Michael Fernandez Santa Clara University Victor Ojeda Santa Clara University Robert Ross Santa Clara University Follow this and additional works at: https://scholarcommons.scu.edu/mech_senior Part of the Mechanical Engineering Commons Recommended Citation Doiron, Adrien; Fernandez, Michael; Ojeda, Victor; and Ross, Robert, "Snowboard, Ski, and Skateboard Sensor System Application" (2014). Mechanical Engineering Senior Theses. 42. https://scholarcommons.scu.edu/mech_senior/42 This Thesis is brought to you for free and open access by the Engineering Senior Theses at Scholar Commons. It has been accepted for inclusion in Mechanical Engineering Senior Theses by an authorized administrator of Scholar Commons. For more information, please contact
[email protected]. Snowboard, Ski, and Skateboard Sensor System Application by Adrien Doiron, Michael Fernandez, Victor Ojeda, Robert Ross SENIOR DESIGN PROJECT REPORT Submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Mechanical or Electrical Engineering School of Engineering Santa Clara University Santa Clara, California December 15, 2014 Snowboard, Ski, and Skateboard Sensor System Application Adrien Doiron, Michael Fernandez, Victor Ojeda, Robert Ross Departments of Mechanical and Electrical Engineering Santa Clara University 2014 ABSTRACT The goal of this project was develop a sensor for the commercial market for skiers, snowboarders, and skateboarders that can give them the data such as speed, elevation, pressure, temperature, flex, acceleration, position, and other performance data such as trick characterization. This was done by using a variety of sensors, including a GPS, flex sensors, accelerometer, and others to provide data such as speed, position, position, and temperature.