GRILL BRUSHES

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

Grill Brush Training Guide

Purpose Grill brushes are used on char-broilers to remove carbon created by food particles sticking to the grill. It is that carbon build-up that spoils the taste of food! When to Use Use a grill brush after each time food is cooked on the grill. A wash down of the grill might be needed on a weekly to monthly basis to remove any heavy build-up. How to Use Using both hands on the handle, place the brush flat on the grill and push back and forth. Brush Care and Cleaning Never rinse or submerge your brush in water. Water warps the wooden block and warping loosens the bristles. For longevity, keep your brush away from heat and water when not in use. Never leave your brush resting on a hot grill. To clean, simply shake the particles of food off by hitting the brush block on a hard surface. You may also rub a damp cloth over the bristles and shake the particles off.

Foodservice Replacement Recommendation It is time to replace a brush if the bristles flatten, loosen, do not clean properly, or the block becomes curved. Frequent replacement of your grill brush will provide optimum performance, thereby assuring that your grill is always clean and safe to use.

Grilling Safety Tips 1. Always use the correct brush for the job. A wire scratch brush used for removing paint or rust is NOT a grill cleaning brush. 2. Carefully inspect your grill cleaning brush for loose or damaged bristles. If you find any bristles that are loose, severely bent or broken, replace your grill brush. 3. Visually inspect your grill each time before you place food on the grates to be certain there are no bristles or other foreign matter stuck to the grill. 4. When cleaning your grill, make certain that no residue is left on the grill before you begin cooking. 5. Never rinse or submerge your brush in water. 6. Never leave your brush resting on a hot grill. 7. To clean, simply shake the particles of food off by hitting the brush block on a hard surface. You may also rub a damp cloth over the bristles and shake the particles off.

16 [email protected] • www.malish.com GRILL BRUSHES - FLAT WIRE

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

Maintain the intended taste of your food with our most aggressive line of Flat Wire grill brushes. Having a clean grill that is free of grease or leftover food particles always results in improved taste. A clean grill also cuts down on excess smoke. Chisel-like flat wire steel and heavy-duty stainless steel metal scrapers allow for quick and easy removal of heavy carbon deposits, rust, and burned-on food build-up. Made in the USA.

Broiler King - 8H This sleek, contemporary 4" grill brush makes it quick and easy to clean and maintain grills caked with stubborn residue. The brush block head is vertically oriented allowing for added strength during the forward and backward motion during cleaning. A heavy-duty scraper blade is attached horizontally to the front end of the cleaning head.

Product Handle Trim Case No. Rows Columns Length Length Qty. BK-8H 12 8 27" 1-1/8" 6 Foodservice

Broiler King Jumbo This 9" grill brush provides quick and extremely aggressive removal of grease and deposits. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. A heavy- duty scraper blade is attached to the cleaning head for the tough-to-tackle grill residue and grime. Ideal for use on grooved griddles and broilers.

Product Handle Trim Case No. Rows Columns Length Length Qty. BKJ 8 12 27" 1-1/8" 4

Double-Sided Broiler Brush With the permanent 8" double-sided angled-head design, it’s never been easier to clean the char-broiler. This brush has two heavy wire bristle heads bolted together on a solid hardwood handle. Blocks are filled with flat wire steel on one side and carbon steel round wire on the other side making this brush very versatile.

Product Handle Trim Case No. Rows Columns Length Length Qty. DBB-42 5 10 Flat 42" 1-1/8" 2 6 19 Round 1-5/8"

[email protected] • www.malish.com 17 GRILL BRUSHES - FLAT WIRE

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

Broiler King - 5 This 7-1/2" grill brush provides quick and extremely aggressive removal of burnt-on carbon, grease and deposits with flat wire steel fill. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. A heavy-duty scraper blade is attached to the cleaning head for the tough-to-tackle grill residue and grime. Ideal for use on grooved griddles and broilers.

Product Handle Trim Case No. Rows Columns Length Length Qty. BK-5 5 10 27" 1-1/8" 8

Broiler King - 4 This 7-1/2" grill brush provides quick and extremely aggressive removal of grease and deposits. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. A heavy-duty scraper blade is attached to the cleaning head for the tough-to-tackle grill residue and grime. Ideal for use on grooved griddles and broilers.

Product Handle Trim Case No. Rows Columns Length Length Qty. BK-4 4 12 27" 1-1/8" 8

Groovy Grill Brush This 2-3/4" grill brush is a smaller version of the Broiler King - 8H. The brush block head is positioned

Foodservice vertically on the handle allowing for added strength during the forward and backward motion while cleaning. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. A heavy-duty scraper blade is attached horizontally to the cleaning head for the tough-to-tackle grill residue and grime.

Product Handle Trim Case No. Rows Columns Length Length Qty. GGB 4 12 27" 1-1/8" 12

Broiler King - 8 This 4" x 9" steel flat wire brush is used for jobs requiring very aggressive action where standard hand brushes with handles are less effective. This brush has 8 rows of bristles in a rectangular wood block with a top-mounted curved wood handle for a secure grip when cleaning.

Product Handle Trim Case No. Rows Columns Length Length Qty. BK-8 8 12 N/A 1-1/8" 12

18 [email protected] • www.malish.com GRILL BRUSHES - STAINLESS STEEL

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

Maintaining the grates of your grill prevents foods from sticking and allows food to be presented that both looks good and tastes great. Our line of stainless steel round wire grill brushes makes for easy removal of finer residue typically associated with fish and chicken. This stainless steel grill brush has stiff bristles that not only clean grill grates better, but also are less likely to bend or break. Made in the USA.

Broiler Queen Grill Brush - SS This heavy-duty 7-1/4" grill brush features sturdy stainless steel round wire and is especially effective cleaning chicken and fish residue left on diamond grill grates. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. The brush also comes with an attached heavy-duty scraper blade.

Product Handle Trim Case No. Rows Columns Length Length Qty. BQ 6 19 27" 1-5/8" 8 Foodservice Deluxe Broiler Queen Grill Brush - SS Our Broiler Queen grill brush is constructed with a shorter handle to accommodate smaller grills and/ or tighter kitchen spaces. This 7-1/4" grill brush features sturdy stainless steel round wire and is especially effective cleaning chicken and fish residue left on diamond grill grates. It comes with an attached heavy-duty scraper blade.

Product Handle Trim Case No. Rows Columns Length Length Qty. DBQ 6 19 14" 1-5/8" 2

Junior Broiler Queen Grill Brush - SS This 7-1/4" Junior Broiler Queen grill brush keeps griddles and grills clean. Featuring stainless steel round wire bristles, this brush is especially effective cleaning chicken and fish residue left on diamond grill grates. With a 20" handle and heavy-duty attached scraper blade, this is the ideal brush for many applications.

Product Handle Trim Case No. Rows Columns Length Length Qty. JBQ 6 19 20" 1" 8

Broiler Power Grill Brush - SS Ideal for reaching every inch of your broiler or oven, this 8" double-sided cleaning grill brush features an extra-long handle to easily access hard-to-reach spaces. Two rows of in-line stainless steel bristles on one side and an offset, more compact pattern of three rows of stainless steel bristles on the other side are designed to powerfully scrub away grease and grime. Also features a heavy-duty scraper blade.

Product Handle Trim Case No. Rows Columns Length Length Qty. BP-SS 2 16 29" 1-1/8" 12 BP-SS-S 2 16 29" 1-1/8" 1 BP-SS-40 2 16 40" 1-1/8" 12

[email protected] • www.malish.com 19 GRILL BRUSHES - BRASS & CARBON STEEL

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

This line of grill and oven brushes features high temperature-resistant brass or carbon steel filaments. Brass bristles are soft enough to not damage grill grates, yet are abrasive enough to address baked-on residue found in cracks and crevices. Perfect for use on porcelain, cast iron cooking grates as well as stone ovens. Carbon steel round wire is ultra flexible and an excellent cost-effective choice. Made in the USA.

Oven Queen Grill Brush - Brass This 7-1/4" brass bristle grill brush is safe for use on pizza ovens, porcelain grates and stone ovens. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. A heavy-duty scraper blade is attached horizontally to the front end of the cleaning head (scraper not recommended for use on porcelain grates). Product Handle Trim Case No. Rows Columns Length Length Qty. OQ 6 19 27" 1-5/8" 2 Ultimate Grill Brush - Brass This 7-1/4" grill brush with short trimmed brass filament is recommended for use on porcelain grates and small grills. The shorter 14" handle accommodates smaller grills or tighter kitchen spaces. A heavy-duty scraper blade is attached horizontally to the front end of the cleaning head (scraper not recommended for use on porcelain grates). Product Handle Trim Case No. Rows Columns Length Length Qty. UGB 6 19 14" 3/4" 2 Economy Broiler Brush - CS This 7-1/4" grill brush is recommended for use when grilling chicken and fish on diamond grate grills. In addition to the carbon steel round wire tufts, it also includes a heavy-duty scraper blade for the tough-to-tackle grill residue and grime. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe.

Foodservice Product Handle Trim Case No. Rows Columns Length Length Qty. EBB 6 19 27" 1-5/8" 8 Broiler Princess Grill Brush - CS This 2-1/2" grill brush is designed for use in hard-to-reach areas that require a narrow face. Constructed with a sturdy hardwood handle assembled in-line with a curved block allowing for added strength during the forward and backward motion. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. Includes a heavy-duty scraper blade for tough-to- tackle grill residue and grime.

Product Handle Trim Case No. Rows Columns Length Length Qty. BP 9 21 27" 1" 12 Broiler Power Grill Brush - CS Ideal for reaching every inch of your broiler, this 8" double-sided cleaning grill brush features an extra-long handle to easily access hard-to-reach spaces. Two rows of in-line carbon steel bristles on one side and an offset, more compact layout of three rows of carbon steel bristles on the other side powerfully scrubs away grease and grime while protecting the surface of ovens and broilers. Includes a heavy-duty scraper blade. Product Handle Trim Case No. Rows Columns Length Length Qty. BP-C 2 16 29" 1-1/8" 12 BP-C-S 2 16 29" 1-1/8" 1 BP-C-40 2 16 40" 1-1/8" 12

20 [email protected] • www.malish.com GRILL BRUSHES - CARBON STEEL AND FLAT WIRE

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

This line of carbon steel wire grill brushes is the perfect choice when looking for the most economical option for tackling tough grill cleaning jobs. Carbon steel round wire is flexible and recommended for use on wire grates. Carbon steel- filled brushes are not recommended for porcelain grills and stone ovens as SSGB-01 these bristles can potentially scratch and scrape. Made in the USA.

Super Saver Grill Brush - Flat Wire This 2-1/2" grill brush is designed for use in hard-to-reach areas that require a narrow face. The handle is in-line with the block allowing for added strength during the forward and backward motion. The extra-long curved 29" handle with non-slip grip prevents the need to reach over hot grill surfaces. Filled with flat wire steel bristles. SSGBB-011 SSGBB-011 Flat Wire Replacement Brush for SSGB-01. Handle not included. Replacing the brush is easy. Simply remove the handle with a screwdriver and attach the new brush. Blocks are grooved and pre-drilled to fit the handle. SSGB-02

Product Handle Trim Case

No. Rows Columns Length Length Qty. Foodservice SSGB-01 10 5 29" 1-1/8" 12 SSGBB-011* 10 5 N/A 1-1/8" 12 * Replacement Brush Super Saver Grill Brush - Round Wire This 2-1/2" grill brush is designed for use in hard-to-reach areas that require a narrow face. The handle is in-line with the block allowing for added strength during the forward and backward motion. The extra-long curved 29" handle with non-slip grip prevents the need to reach over hot grill surfaces. Filled with carbon steel round wire bristles. SSGBB-022 SSGBB-022 Round Wire Replacement Brush for SSGB-02. Handle not included. Replacing the brush is easy. Simply remove the handle with a screwdriver and attach the new brush. Blocks are grooved and pre-drilled to fit the handle.

Product Handle Trim Case No. Rows Columns Length Length Qty. SSGB-02 10 5 29" 1-5/8" 12 SSGBB-022* 10 5 N/A 1-5/8" 12 * Replacement Brush

Plywood Grill Brush - CS Constructed with a water-repellant plywood block, this 7-1/4" grill brush is designed to be used in moist grilling areas. Provides quick and easy removal of grease and deposits. The long 27" handle allows for added reach to make cleaning the entire grill quick, easy and safe. A heavy-duty scraper blade is attached to the brush head (scraper is not recommended for use on porcelain grates). Product Handle Trim Case No. Rows Columns Length Length Qty. PGB 6 19 27" 1-5/8" 8 See Replacement Brush WBC-P (on page 23).

[email protected] • www.malish.com 21 PIZZA OVEN BRUSHES

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

This line of pizza oven brushes is used to clean the pizza stones and any flat metal surfaces inside of the oven. Over time, spilled cheese and sauces can collect in the ovens and affect the taste of the food. Made with durable, yet gentle brass bristles, these pizza oven brushes can take on the toughest of POB jobs with ease. Brass is the most flexible and softest of the metals offered and will not scratch stone ovens. Made in the USA.

Pizza Oven Brush This durable and lightweight 9-1/4" pizza oven brush is filled with sturdy but gentle crimped brass bristles. This brush is used to “scrub” the oven of carbon deposits, rust, and the build-up of food that is POB-B baked on. A full-length scraper blade for the tough-to-tackle residue and grime is included. A 42" long, thick wooden handle is attached to the brush block. POB-B Pizza Oven Replacement Brush. To replace the brush, the scraper and handle can be easily removed from the brush with a screwdriver. The block has pre-drilled holes for easy replacement.

Product Handle Trim Case No. Rows Columns Length Length Qty. POB 6 25 42" 1-1/4" 2 POB-B* 6 25 N/A 1-1/4" 6 * Replacement Brush

POB-E Economy Pizza Oven Brush This 10" Economy Pizza Oven Brush is a smaller version of our Pizza Oven Brush. The brush's narrow width allows the user to clean hard-to-reach areas.This brush is used to “scrub” the oven of carbon deposits, rust, and the build-up of food that is baked on. A full-length scraper blade for the tough-to-tackle residue and grime is included. A 48" long, thick wooden handle is attached to the brush block. POBB-E Economy Pizza Oven Replacement Brush. The brush and scraper blade can be easily removed from the handle with a screwdriver. The block has pre-drilled holes for easy replacement.

Foodservice Product Handle Trim Case POBB-E No. Rows Columns Length Length Qty. POB-E 2 20 48" 1" 12 POBB-E* 2 20 N/A 1" 12 * Replacement Brush

Pizza & Bakery Oven Brushes - 36" & 51" These sturdy wooden handle brushes are constructed from one solid piece of wood and filled with Tampico fiber. Used for cleaning pizza and bakery ovens, these brushes will not melt in the oven. The purpose of this brush is to quickly brush out debris from the oven and provide a clean surface for the next use.

Product Product Handle Trim Case No. Discription Material Length Qty. BB-36 Wood Handle Tampico Fiber Brush Wood 2" 6 BB-51 Wood Handle Tampico Fiber Brush Wood 2" 6 BB-51

BB-36

22 [email protected] • www.malish.com GRILL BRUSHES - BRUSHES & BLOCKS WIRE BLOCKS

TO PLACE AN ORDER: Phone: 800.321.7044 Fax: 440.951.0293

Junior Grill Brush A long, narrow brush designed to reach and clean small spaces, this brush is 14" long with a permanent wooden handle filled with carbon steel wire. A small, heavy-duty steel scraper blade is attached to the top of the brush head to reach in between grill grates.

Product Handle Trim Case No. Rows Columns Length Length Qty. JGB 19 3 14" 1-1/4" 12 Foodservice

WBS-03 WBC-02

473711

WBC-05

Wire Brushes Replaceable brushes with various wire fills. All wood blocks except WBC-P which is plywood.

Product Trim Length/ Brush Case No. Rows Columns Wire Type Dimensions (LxW) Qty. 473711 5 10 1-1/4" Flat Wire Steel 7.75" x 2.68" 12 WBC-02 6 19 1-5/8" Carbon Steel 7.25" x 2.25" 12 WBC-P WBS-03 6 19 1-5/8" Stainless Steel 7.25" x 2.25" 12 WBC-05 9 21 1-5/8" Carbon Steel 7.25" x 2.50" 12 WBC-P 6 19 1-5/8" Carbon Steel 7.25" x 2.25" 12

[email protected] • www.malish.com 23