Certificate to Whom It May Concern
Total Page:16
File Type:pdf, Size:1020Kb
CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Kaila Akash Vinodbhai (16BME002) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Design of cryogenic adsorber' at Institute for Plasma Research (IPR) Gandhinagar - Ahmedabad Rd, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. V J Lakhera (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Parmar Nikunj Arvindbhai (16BME003) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Design and prototypedevelopment of 3 DOF parallel haptic arm' at Institute for Plasma Research (IPR) Gandhinagar - Ahmedabad Rd, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. J M Dave (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Alok Abhayajith (16BME004) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Mathematical modelling of multibranch heat pipe' at Institute of Technology, Nirma University, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Anand Bhatt (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Parth Patel (16BME005) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Time reduction in fabrication of chemical vessels' at Ashok Engineers, Odhav, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Arvind Sankhla (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Patadiya Rajan Rajeshbhai (16BME007) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Productivity improvement in BIW shop using innovative ideas and indirect techniques' at Tata Motors , Sanand during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. B K Mawandiya (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Animesh Raj (16BME008) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Reduction of cycle time of grinding machines.' at NBC bearings, Vadodara during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Saumil Desai (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Anuj S Shah (16BME010) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Improvement of surface quality of membrane diaphragm of filter press' at Nimal Poly Plast, Sanand during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. N D Ghetiya (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Arjun Dethalia (16BME012) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Parametric investigation on silt erosion in hydraulic turbines' at Institute of Technology, Nirma University, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Roshan Tandel (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Patel Bhargav Jayeshbhai (16BME013) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Design and analysis of gripper used for MEMs' at Institute of Technology, Nirma University, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. M B Panchal (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Sheth Arpit Vipulkumar (16BME014) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Development of experimental facilities to produce potable water through extraction from air' at Institute of Technology, Nirma University, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. A M Lakdawala (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Ashishkumar Baldha (16BME016) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Jig design and assembly for indexing drilling and cam and follower design for automation' at VD machine tools, Rajkot during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Ashish Gohil (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Asodariya Abhishek Vallabhbhai (16BME017) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Improvement in process quality by designing and implementing fixture' at Larsen & Toubro : Electrical and automation, Vadodara during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Arvind Sankhla (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Patel Kevinkumar Suresbhai (16BME018) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Designa and development of structure climbing robot' at Institute of Technology, Nirma University, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Darshita Shah (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Avi Jain (16BME019) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Reliability enhancement of equipments' at Nuvoco Vistas Corp Ltd, Chittorgarh, Rajasthan during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. B K Mawandiya (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Patel Avi Bhupendrakumar (16BME021) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Statistical process control of bolted joints' at Tata Motors, Sanand during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. S J Joshi (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Patel Mitul Mohanbhai (16BME022) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Mathematical modelling of multibranch heat pipe' at Institute of Technology, Nirma University, Ahmedabad during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. Anand Bhatt (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Bhavin Mogra (16BME023) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Prediction logic in automobile services' at Autoninja, Bangaluru during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. B A Shah (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Patel Param Vikantbhai (16BME024) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Design and development of automated parking system for cars' at UD Design and Innovations Lab, Rajkot during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. D B Shah (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Patel Vatsal Harshadkumar (16BME025) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has carried out and satisfactorily completed the Major Project (ME801) titled 'Fixed offshore platform; jacket fabrication' at L&T Heavy Engineering, Hazira, Surat during JANUARY to APRIL 2020. Date: May 20, 2020 Prof. R R Trivedi (Guide) Head of the Department CERTIFICATE TO WHOM IT MAY CONCERN This is to certify that, Mr. Bhammar Arjun Bhagubhai (16BME026) student of Mechanical engineering, Semester-VIII of Nirma University , Institute of Technology, School of Engineering has