DINING TABLE DINING Care & Maintenance Parts List & Hardware ROUND 48 INCH 48 ROUND Care & Maintenance Parts List & Hardware RD48TA Your Oxford furniture arrives in its natural state, A (8) Washers without any oils or finishes. Upon completion of assembly, you may notice some staining from your B (8) Hexagon Nuts hands, or possibly some water stains from C (5) Bolts shipping. Shorea is extremely dense, and therefore D (5) Insert Nuts any staining will be only on the very surface of the wood, so any marks or abrasions can be easily E (1) Allen Key removed by liberally sanding the wood with 100 F (4) Wood Screws grit, or medium, sandpaper. G (1) Table Top
Shorea is strong enough and weather resistant H (4) Table Legs enough to be left totally untreated. If left alone, I (1) Top Cross Bar your furniture will weather naturally with time, J (1) Bottom Cross Bar turning a warm and soothing shade of gray. If you prefer to prevent this natural weathering, or to enhance the luster and color of the wood, you may seasonally apply a coat of teak oil. If you allow your Congratulations furniture to weather, and later decide to restore it to About Shorea Wood its original condition, use a teak cleaner first, and
Congratulations, and thank you, for your purchase then you may apply the teak oil. These products Shorea is a tropical hardwood that grows plentifully are available at most hardware stores and boat of a finely crafted piece of natural shorea furniture in the Pacific Rim countries of Burma, Malaysia, from Oxford Garden Designs. Enclosed in this dealers, and are available through many Oxford and Indonesia. Shorea is closely related to teak, document is important information about shorea dealers. and is therefore well suited for use in furniture wood, instructions for assembly, and care and making. It is renowned for its strength, durability, If the furniture is going to be placed on a concrete maintenance of your furniture. Please take a and beauty. Like teak, shorea has natural oils that or tile patio, it should first be rinsed well to remove moment to read this information. You will then be the sawdust that may cause some staining. allow it to withstand the effects of sun, rain, snow, ready to put your furniture together and begin a and frost. lifetime of outdoor enjoyment.
Oxford Garden Designs 4175 Lyndon Way Louisville, KY 40207 p: 502-719-2222 f: 502-719-8888 RD48TA - Round 48” Dinning Table
The Oxford Garden Designs Round 48” Dining Table has seven component parts - table top, (4) legs, and (2) crossing foot braces.
To assemble: 1. On a clean surface, lay tabletop (G) on its back.
2. Install each leg (H) by placing two bolts through each corner brace at each outside corner. Slide washer (A) over each bolt and secure with nut (B).
3. Position crossing foot braces onto legs as shown in drawing. Brace (I) will be secured first. Brace (I) is the brace WITHOUT the four predrilled holes surrounding the umbrella hole. Place insert nut (D) into hole of one leg (H).
Hint: screw a bolt (C) into end of the insert nut (D), place into leg hole & then rotate until hole in insert nut points directly to end of leg to accept another bolt (C). [see figure 1]
Tighten bolt (C) with allen key (E), and repeat for remaining legs (H).
4. Drive the 4 woodscrews (F) through the predrilled holes in cross brace (J).
5. Carefully turn table upright and enjoy.