Race Car Spec's 2020
Total Page:16
File Type:pdf, Size:1020Kb
WOLVERHAMPTON SCC – RACE CAR SPEC’S 2020 CLASS 7 – FERRARI GT Eligible models Any 1/32 scale model of a Ferrari Sports, GT, Le Mans car. Examples of ‘Ready- to- Run’ slot cars - Black Arrow: Ferrari 458 GT3. Racer Sideways: Ferrari 512 BB/LM, Ferrari 512S, Ferrari 330 P4. Policar: Ferrari F40, Ferrari 330 P4, Ferrari 412 P. Body Shell Plastic or resin molded (no Lexan Vac forms). White kits must be fully painted. Rear Wing (if fitted) must be securely in place at the start of a race. Interior Driver and Interior details must be fitted (original items or lightweight Lexan type to suit). Chassis Plastic only, injection molded or 3-D printed. Must match body shell (not modified to fit). Traction magnets must be removed. Motor mount Any plastic, in- line, side-winder or angle-winder motor mount (no metal mounts). Motor Any Mabuchi-type 12v Short or Long Can motor (no rpm limit). Gearing Any in-line, side-winder or angle-winder type crown/spur and pinion set-up. Free choice of ratio (11t/28t typical). Front wheels & tyres Hubs: alloy or plastic, size to suit model (15.8x8 mm typical) Tyres: Zero Grip rubber allowed. See set-up notes below. Inserts: Optional Rear wheels & tyres Hubs: alloy (single or double shoulder), size to suit model (15.8x10mm typical) Tyres: any black rubber (no ‘F’ compound, silicone, foam or Formula 1 type). See set-up notes below. Inserts: Optional Free Choice items Axles, bearings, suspension, axle stoppers, slot guide, lead wire, braid material, fixing screws (for body and motor mount). Set-up Notes Chassis: a small amount of plastic can be removed to allow for body “float”. Body fixing screws: may be loose but must be covered to prevent loss. Front and rear tyres: may be glued, trued and conditioned i.e. front tyres may be glazed with nail varnish or similar, rear tyres may be softened using ‘3-in-1 Oil’ or similar – but must be dry before being placed on the track. Ballast may be added to the chassis but must be securely fixed. Model Dimensions Max. weight: 105 grams Max. width: Wheel-arch width plus 2,0mm max. over tyre sidewalls Min. ground clearance: 1,2mm .