DOCSLIB.ORG

25 Words: Sulfuric Acid

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
25 Words: Sulfuric Acid 25 WORDS: SULFURIC ACID Sulfuric acid is a very strong acid that is used widely in industry. It is used to create phosphoric acid (to make fertilizer with) and can also be used in the metal and chemical industries. Sulfuric acid, or H2SO4, is a reactive mineral acid used in refining oil, a component of fertilizer, and a product in chemical synthesis. It is present as a component of acid rain. Sulfuric acid, H2SO4, is a mineral acid that was discovered by Jabir ibn Hayyan. It is one of the most important chemicals in the chemical industry. This polar liquid helps form acid rain. Sulfuric acid (also known as vitriol or oil of vitriol) is a highly corrosive, dense, oily liquid. It's a strong mineral acid that is soluble in water at all concentrations. Sulfuric acid H2SO4, is a strong mineral acid. Many wouldn’t know that Sulfuric acid is produced in the upper atmosphere of Venus by the sun's. Sulfuric acid, H2SO4, is a clear, colorless, corrosive liquid. This strong acid is created industrially through the reaction of water and sulfur trioxide and is used to manufacture fertilizers, dyes, explosives, and detergents. Sulfuric acid, H2SO4, was discovered by Jabir ibn Hayyan. Sulfuric acid is clear, colorless, and odorless like water, but is very corrosive. Sulfuric acid can be found in Venus’ atmosphere. Sulfuric acid (H2SO4) is a colorless, odorless, oily liquid that is very corrosive and reacts with many other chemicals and substances. The most natural source of sulfuric acid comes from volcanoes Sulfuric acid is a strong mineral acid that is soluble in water at all concentrations. It has many applications and is one of the top products of the chemical industry. Sulfuric Acid; also spelled sulphuric acid. It's molecular formula H2SO4, it's widely used in the production of fertilizers and detergerent. Sulfuric acid also can cause burns or it's best not to touch it. Sulfuric Acid, H2SO4, is a strong mineral acid. It is used in manufacturing fertilizer, refining oils, and processing dirty water. Sulfuric acid is one of the most widely produced chemical product. Sulfuric acid is a strong mineral acid with the chemical formula H2SO4. It is a colorless, oily liquid. The pure acid has a density of 1.834 at 25°C and freezes at 10.5°C (50.90°F). Sulfuric acid (H2SO4) is a clear, colorless, odorless, viscous liquid that is very corrosive. Consumption of sulfuric acid is often used to monitor a country's degree of industrialization. Sulfuric acid (also known as vitriol or oil of vitriol) is a highly corrosive, dense, oily liquid. It's a strong mineral acid that is soluble in water at all concentrations. Sulfuric Acid; H2SO4; Sulfuric acid is a strong acid that is one of the top selling products in the chemical industry. It was discovered in the 800's by Jabir ibn Hayyan. Sulfuric Acid, H2SO4, is a strong colorless mineral acid that is soluble in water at all concentrations. It is one of the top products in the chemical industry. Sulfuric Acid is a corrosive, oily, colorless liquid. When it is mixed with water, it gives off considerable heat. Unless well stirred, the heat will reach boiling point and blow out of the container. sulfuric acid; Sulfuric acid is a strong mineral acid that is soluble in water at all concentrations. It is also one of the top products of the chemical industry. Sulfuric acid is a mineral acid that was once known as oil of vitriol. It was one of the most produce products that got 165 million metric tons, approximate value of $8 billion. Sulfuric acid is a strong mineral acid with the molecular formula H2SO4. It is soluble in water, and is mainly used in ore processing, oil refining, fertilizer manufacturing, and wastewater processing. The chemical formula for sulfuric acid is H2SO4. Sulfuric acid was once known as the oil of vitriol.Sulfuric acid is used for ore producing, fertilizer,oil refining, and more! Sulfuric acid is a corrosive acid with the chemical formula H2SO4. It is soluble in water at all concentrations, and is industrially used to produce phosphoric acid. Sulfuric acid is a clear, colorless, odorless liquid that is very caustic. It reacts violently with water. Some of its uses include the production of dyes, plastics, glue, film, and explosives. Sulfuric acid is widely produced in the chemical industry. Pure sulfuric acid can not be found on Earth but it is present in acid rain. It contains sulfur, oxygen, and water. Sulfuric acid, H2SO4, is a strong mineral acid with a melting point of 10*C and a boiling point of 290*C. Sulfuric acid reacts with copper oxide to form copper sulfate. Sulfuric acid, H2SO4, is a clear, colorless, odorless, and highly corrosive liquid. It is very soluble in water. However, one must always add the acid to water rather than vice versa. Sulfuric acid, H2SO4, is a strong mineral acid. It is soluble in water at all concentrations. It is used in ore processing, fertilizer manufacturing, oil refining, wastewater processing, and chemical synthesis. Sulfuric Acid (H2SO4, oil of vitriol) is a strong acid that is soluble in water. It is one of the most abundantly produced chemicals for industrial use including fertilizer production, ore processing, and oil refining. Sulfuric acid,HSO4, is a molecule that contains sulfur,hydrogen and oxygen. Sulfuric acid is present in the atmosphere of Venus and it is present in acid rain. Sulfuric Acid; Sulfuric Acid, H2SO4, is an extremely hazardous acid. It is a dense, colorless, oily corrosive liquid. It is used to make dyes, fertilizers, pigments, explosives, and as an electrolyte in lead-acid storage batteries. Sulfuric acid; Sulfuric acid, H2SO4,is a very strong acid. It is almost impossible to find pure sulfuric acid on earth, but it is easily found in the form of acid rain. -- H2SO4 is like ethylene when it comes to color and odor, but the difference is sulfuric acid reacts violently with water. It can cause severe burns and it can be harmful if inhaled, ingested, or skin contact. Sulfuric acid, H2SO4, is an odorless, colorless, oily liquid. Sulfuric acid can be found in most production of manufactured goods and production of agricultural fertilizers. Sulfuric acid, H2SO4, and is a strong mineral acid with the molecular formula. It is water soluble at all concentrations. Sulfuric acid has many applications, and is one of the top products of the chemical industry. Sulfuric acid, H2SO4, is one of the top products in the chemical industry. It is highly corrosive and it can be used in fertilizers, steelmaking, and in the manufacturing of aluminum sulfate. sulfuric acid is a strong mineral acid containing two moles of Hydrogen, one mole of Sulfur, and 4 moles of Oxygen. sulfuric acid is one of the top products of the chemical industry. Sulfuric acid, a strong mineral acid with the molecular formula H2SO4. It has many applications, and is one of the top products of chemical industries. This molecule is also known as hydrogen sulfate. Sulfuric acid, H2SO4, is a strong mineral acid that is soluble in water at all concentrations. It is widely used in ore processing, fertilizer manufacturing, oil refining, wastewater processing, and chemical synthesis. Sulfuric acid is a strong mineral acid with the molecular formula H2SO4. It is soluble in water at all concentrations. It was once known as oil of vitriol, coined by the 8th-century Muslim alchemist Sulfuric acid (H2SO4) is a colorless liquid solution with a very high boiling point which is o 327 C. 65% H2SO4 have been used by Agriculture industry to product glues, drugs, containers, rubbers, plastic, etc. H2SO4 is hazardous to human, as well as inhale and the acid burn will accord if there is only a drop of H2SO4 spill on our skin. The chemical formula for sulfuric acid is H2SO3. Sulfuric acid reacts violently with water and it is used in soil and fertilizers. It is also used in dyes. Sulfuric acid is a dense, colorless, corrosive acid. .
Load more

Recommended publications
  • EPA Method 8: Determination of Sulfuric Acid and Sulfur Dioxide
    733 METHOD 8 - DETERMINATION OF SULFURIC ACID AND SULFUR DIOXIDE EMISSIONS FROM STATIONARY SOURCES NOTE: This method does not include all of the specifications (e.g., equipment and supplies) and procedures (e.g., sampling and analytical) essential to its performance. Some material is incorporated by reference from other methods in this part. Therefore, to obtain reliable results, persons using this method should have a thorough knowledge of at least the following additional test methods: Method 1, Method 2, Method 3, Method 5, and Method 6. 1.0 Scope and Application. 1.1 Analytes. Analyte CAS No. Sensitivity Sulfuric acid, including: 0.05 mg/m3 Sulfuric acid 7664-93-9 (0.03 × 10-7 3 (H2SO4) mist 7449-11-9 lb/ft ) Sulfur trioxide (SO3) 3 Sulfur dioxide (SO2) 7449-09-5 1.2 mg/m (3 x 10-9 lb/ft3) 1.2 Applicability. This method is applicable for the determination of H2SO4 (including H2SO4 mist and SO3) and gaseous SO2 emissions from stationary sources. NOTE: Filterable particulate matter may be determined along with H2SO4 and SO2 (subject to the approval of the Administrator) by inserting a heated glass fiber filter 734 between the probe and isopropanol impinger (see Section 6.1.1 of Method 6). If this option is chosen, particulate analysis is gravimetric only; sulfuric acid is not determined separately. 1.3 Data Quality Objectives. Adherence to the requirements of this method will enhance the quality of the data obtained from air pollutant sampling methods. 2.0 Summary of Method. A gas sample is extracted isokinetically from the stack.
    [Show full text]
  • The Determination of Sulfate and Sulfide Sulfur in Rocks Or Minerals
    The Determination of Sulfate and Sulfide Sulfur in Rocks or Minerals By ANGELINA C. VLISIDIS CONTRIBUTIONS TO GEOCHEMISTRY GEOLOGICAL SURVEY BULLETIN 1214-D UNITED STATES GOVERNMENT PRINTING OFFICE, WASHINGTON : 1966 UNITED STATES DEPARTMENT OF THE INTERIOR STEWART L. UDALL, Secretary GEOLOGICAL SURVEY William T. Pecora, Director For sale by the Superintendent of Documents, U.S. Government Printing Office Washington, D.C. 20402 - Price 15 cents (paper cover) CONTENTS Page Abstract_____--__-___-_______-__---____,__-_-__-_---_-_______-_- Dl Introduction. ______________________________________________________ 1 Preparations. _________._.-.__-_-.__.._-_---__----.________._.._____ 2 Standard samples____________________________________________ 2 Reagents. _______________.-_-___-____-__-_-__-_-___-_______-_- 2 Procedure._______________________________________________________ 2 Results__ __________-______-_____----__--_--_----_-_-_-___-___--_ 3 References.._ _____________________________________________________ 5 TABLE Page TABLE 1. Results of sulfide and sulfate sulfur analyses in which varying amounts of a sulfate standard were added to sulfide minerals.. _ D4 m 209-517 66 CONTRIBUTIONS TO GEOCHEMISTRY THE DETERMINATION OF SULFATE AND SULFIDE SULFUR IN ROCKS OR MINERALS By ANGELINA C. VLISEDIS , ABSTRACT A method for the determination of sulfate and sulfide sulfur that occur together in rocks or minerals is presented. All the sulfate sulfur is converted to barium sulfate in an inert atmosphere to prevent oxidation of any sulfide sulfur. Cadmium chloride is added to precipitate any sulfide ion that may be liberated. The sulfate sulfur is then measured indirectly by the determination of the barium and is therefore unaffected by any. subsequent oxidation of the sulfide sulfur.
    [Show full text]
  • Nitration of Naphthalene and Remarks on the Mechanism of Electrophilic Aromatic Nitration* (Two-Step Mechanism) GEORGE A
    Proc. Nati. Acad. Sci. USA Vol. 78, No. 6, pp. 3298-3300, June 1981 Chemistry Nitration of naphthalene and remarks on the mechanism of electrophilic aromatic nitration* (two-step mechanism) GEORGE A. OLAH, SUBHASH C. NARANG, AND JUDITH A. OLAH Institute of Hydrocarbon Chemistry, Department of Chemistry, University of Southern California, Los Angeles, California 90007 Contributed by George A. Olah, March 2, 1981 ABSTRACT Naphthalene was nitrated with a variety of ni- Table 1. Nitration of naphthalene with various nitrating agents trating agents. Comparison of data with Perrin's electrochemical nitration [Perrin, C. L. (1977)J. Am. Chem. Soc. 99, 5516-5518] a/p shows that nitration of naphthalene gives an a-nitronaphthalene Temp, isomer to fi-nitronaphthalene ratio that varies between 9 and 29 and is Reagent Solvent OC ratio Ref. thus not constant. Perrin's data, therefore, are considered to be NO2BF4 Sulfolane 25 10 * inconclusive evidence for the proposed one-electron transfer NO2BF4 Nitromethane 25 12 mechanism for the nitration of naphthalene and other reactive HNO3 Nitromethane 25 29 1 aromatics. Moodie and Schoefield [Hoggett, J. G., Moodie, R. B., HNO3 Acetic acid 25 21 1 Penton, J. R. & Schoefield, K. (1971) Nitration andAromatic Reac- HNO3 Acetic acid 50 16 1 tivity (Cambridge Univ. Press, London)], as well as Perrin, in- HNO3 Sulfuric acid 70 22 1 dependently concluded that, in the general scheme of nitration of HNO3 Acetic 25 9 reactive aromatics, there is the necessity to introduce into the clas- anhydride sical Ingold mechanism an additional step involving a distinct in- CH30NOjCH3OSO2F Acetonitrile 25 13 * termediate preceding the formation ofthe Wheland intermediate AgNO3/CH3COCI Acetonitrile 25 12 * (o complexes).
    [Show full text]
  • Sulfur and Tennessee Row Crops
    W 435 SULFUR AND TENNESSEE ROW CROPS Sulfur (S) deficiencies have become more common in recent years. This publication outlines the importance and role of S in higher plants, summarizes recent research, and defines the University of Tennessee’s current S recommendations for row crops. Tyson B. Raper1, Angela T. McClure2, Frank Yin3 and Blake Brown4 1Assistant Professor, Cotton and Small Grains Specialist, Department of Plant Sciences 2Associate Professor, Corn and Soybean Specialist, Department of Plant Sciences 3Associate Professor, Cropping Systems Agronomist, Department of Plant Sciences 4Director, AgResearch and Education Center at Milan INTRODUCTION Sulfur (S) deficiencies have become more common in recent years due to a reduction in S deposition. Research at the University of Tennessee has begun to answer several key questions on crop response to applications of this nutrient. The objective of this publication is to outline the importance of S and the role it plays within higher plants, describe why the deficiencies are becoming more common, summarize recent research and define the University of Tennessee’s current S recommendations for Tennessee row crops. THE ROLE AND IMPORTANCE OF SULFUR IN HIGHER PLANTS Sulfur is an important nutrient in living systems; it is contained within four common amino acids that assist in the synthesis, structure and function of proteins (Brosnan & Brosnan, 2006). In plant nutrition, S is classified as a macronutrient since it is required in quantities much larger than most micronutrients. Within the macronutrient classification, S falls within the secondary nutrient subclassification along with calcium and magnesium. Although S isn’t a primary macronutrient, it is occasionally referred to as the fourth major nutrient (Stewart, 2010), and if contained within a fertilizer, the S percentage is commonly listed as the fourth Figure 1: Most S containing fertilizers have four number in the fertilizer analysis or grade numbers reported in the analysis or grade, with the first (Figure 1).
    [Show full text]
  • APPENDIX G Acid Dissociation Constants
    harxxxxx_App-G.qxd 3/8/10 1:34 PM Page AP11 APPENDIX G Acid Dissociation Constants §␮ ϭ 0.1 M 0 ؍ (Ionic strength (␮ † ‡ † Name Structure* pKa Ka pKa ϫ Ϫ5 Acetic acid CH3CO2H 4.756 1.75 10 4.56 (ethanoic acid) N ϩ H3 ϫ Ϫ3 Alanine CHCH3 2.344 (CO2H) 4.53 10 2.33 ϫ Ϫ10 9.868 (NH3) 1.36 10 9.71 CO2H ϩ Ϫ5 Aminobenzene NH3 4.601 2.51 ϫ 10 4.64 (aniline) ϪO SNϩ Ϫ4 4-Aminobenzenesulfonic acid 3 H3 3.232 5.86 ϫ 10 3.01 (sulfanilic acid) ϩ NH3 ϫ Ϫ3 2-Aminobenzoic acid 2.08 (CO2H) 8.3 10 2.01 ϫ Ϫ5 (anthranilic acid) 4.96 (NH3) 1.10 10 4.78 CO2H ϩ 2-Aminoethanethiol HSCH2CH2NH3 —— 8.21 (SH) (2-mercaptoethylamine) —— 10.73 (NH3) ϩ ϫ Ϫ10 2-Aminoethanol HOCH2CH2NH3 9.498 3.18 10 9.52 (ethanolamine) O H ϫ Ϫ5 4.70 (NH3) (20°) 2.0 10 4.74 2-Aminophenol Ϫ 9.97 (OH) (20°) 1.05 ϫ 10 10 9.87 ϩ NH3 ϩ ϫ Ϫ10 Ammonia NH4 9.245 5.69 10 9.26 N ϩ H3 N ϩ H2 ϫ Ϫ2 1.823 (CO2H) 1.50 10 2.03 CHCH CH CH NHC ϫ Ϫ9 Arginine 2 2 2 8.991 (NH3) 1.02 10 9.00 NH —— (NH2) —— (12.1) CO2H 2 O Ϫ 2.24 5.8 ϫ 10 3 2.15 Ϫ Arsenic acid HO As OH 6.96 1.10 ϫ 10 7 6.65 Ϫ (hydrogen arsenate) (11.50) 3.2 ϫ 10 12 (11.18) OH ϫ Ϫ10 Arsenious acid As(OH)3 9.29 5.1 10 9.14 (hydrogen arsenite) N ϩ O H3 Asparagine CHCH2CNH2 —— —— 2.16 (CO2H) —— —— 8.73 (NH3) CO2H *Each acid is written in its protonated form.
    [Show full text]
  • Introduction to Chemistry
    Introduction to Chemistry Author: Tracy Poulsen Digital Proofer Supported by CK-12 Foundation CK-12 Foundation is a non-profit organization with a mission to reduce the cost of textbook Introduction to Chem... materials for the K-12 market both in the U.S. and worldwide. Using an open-content, web-based Authored by Tracy Poulsen collaborative model termed the “FlexBook,” CK-12 intends to pioneer the generation and 8.5" x 11.0" (21.59 x 27.94 cm) distribution of high-quality educational content that will serve both as core text as well as provide Black & White on White paper an adaptive environment for learning. 250 pages ISBN-13: 9781478298601 Copyright © 2010, CK-12 Foundation, www.ck12.org ISBN-10: 147829860X Except as otherwise noted, all CK-12 Content (including CK-12 Curriculum Material) is made Please carefully review your Digital Proof download for formatting, available to Users in accordance with the Creative Commons Attribution/Non-Commercial/Share grammar, and design issues that may need to be corrected. Alike 3.0 Unported (CC-by-NC-SA) License (http://creativecommons.org/licenses/by-nc- sa/3.0/), as amended and updated by Creative Commons from time to time (the “CC License”), We recommend that you review your book three times, with each time focusing on a different aspect. which is incorporated herein by this reference. Specific details can be found at http://about.ck12.org/terms. Check the format, including headers, footers, page 1 numbers, spacing, table of contents, and index. 2 Review any images or graphics and captions if applicable.
    [Show full text]
  • Dissociation Constants and Ph-Titration Curves at Constant Ionic Strength from Electrometric Titrations in Cells Without Liquid
    U. S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS RESEARCH PAPER RP1537 Part of Journal of Research of the N.ational Bureau of Standards, Volume 30, May 1943 DISSOCIATION CONSTANTS AND pH-TITRATION CURVES AT CONSTANT IONIC STRENGTH FROM ELECTRO­ METRIC TITRATIONS IN CELLS WITHOUT LIQUID JUNCTION : TITRATIONS OF FORMIC ACID AND ACETIC ACID By Roger G. Bates, Gerda L. Siegel, and S. F. Acree ABSTRACT An improved method for obtaining the titration curves of monobasic acids is outlined. The sample, 0.005 mole of the sodium salt of the weak acid, is dissolver! in 100 ml of a 0.05-m solution of sodium chloride and titrated electrometrically with an acid-salt mixture in a hydrogen-silver-chloride cell without liquid junction. The acid-salt mixture has the composition: nitric acid, 0.1 m; pot assium nitrate, 0.05 m; sodium chloride, 0.05 m. The titration therefore is performed in a. medium of constant chloride concentration and of practically unchanging ionic­ strength (1'=0.1) . The calculations of pH values and of dissociation constants from the emf values are outlined. The tit ration curves and dissociation constants of formic acid and of acetic acid at 25 0 C were obtained by this method. The pK values (negative logarithms of the dissociation constants) were found to be 3.742 and 4. 754, respectively. CONTENTS Page I . Tntroduction __ _____ ~ __ _______ . ______ __ ______ ____ ________________ 347 II. Discussion of the titrat ion metbod __ __ ___ ______ _______ ______ ______ _ 348 1. Ti t;at~on. clU,:es at constant ionic strength from cells without ltqUld JunctlOlL - - - _ - __ _ - __ __ ____ ____ _____ __ _____ ____ __ _ 349 2.
    [Show full text]
  • Sulfuric Acid
    TECHNICAL BULLETIN 19 Motivation Dve Wangara, WA, 6065 AUSTRALIA T +61 8 9302 4000 | FREE 1800 999 196 | F +61 8 9302 5000 SULFURIC ACID MATERIAL & FUNCTION General: Sulfuric Acid (H2SO4) (also spelled Sulphuric Acid) is a strong mineral acid used in many industrial processes as well as batteries. It is one of the largest inorganic industrial chemicals produced by tonnage. The quantity of sulfuric acid produced has been used as an indicator of a country’s industrial status. Uses: Sulfuric acid is one of the most important industrial chemicals. More of it is made each year than is made of any other manufactured chemical. It has widely varied uses and plays some part in the production of nearly all manufactured goods. The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. Sulfuric acid is a strong acid used as an intermediate in the synthesis of linear alkylbenzene sulfonate surfactants used in dyes, in petroleum refining, for the nitration of explosives, in the manufacture of nitrocellulose, in caprolactam manufacturing, as the electrolyte in lead-acid batteries, and as a drying agent for chlorine and nitric acid It is used in petroleum refining to wash impurities out of gasoline and other refinery products. Sulfuric acid is used in processing metals, e.g., in pickling (cleaning) iron and steel before plating them with tin or zinc. Rayon is made with sulfuric acid. It serves as the electrolyte in the lead-acid storage battery commonly used in motor vehicles (acid for this use, containing about 33% H2SO4 and with specific gravity about 1.25, is often called battery acid).
    [Show full text]
  • Preparation of 5-Bromo-2-Naphthol: the Use of a Sulfonic Acid As a Protecting and Activating Group
    Molbank 2009, M602 OPEN ACCESS molbank ISSN 1422-8599 www.mdpi.com/journal/molbank Short Note Preparation of 5-Bromo-2-naphthol: The Use of a Sulfonic Acid as a Protecting and Activating Group Renata Everett, Jillian Hamilton and Christopher Abelt * Department of Chemistry, College of William and Mary, Williamsburg, VA 23187, USA * Author to whom correspondence should be addressed; E-mail: [email protected] Received: 2 June 2009 / Accepted: 25 June 2009 / Published: 29 June 2009 Abstract: The preparation of 5-bromo-2-naphthol (4) in three steps from 5-amino-2- naphthol (1) is described. A sulfonic acid group is introduced at the 1-position as an activating and protecting group for the Sandmeyer reaction. The sulfonate group allows for the use of only water and sulfuric acid as solvents. The sulfonic acid is introduced with three equivalents of sulfuric acid, and it is removed in 20% aq. sulfuric acid. Keywords: Sandmeyer reaction; protecting group; sulfonation; desulfonation 1. Introduction Regioselective synthesis of disubstituted naphthalenes can be challenging especially when the substituents are on different rings. We needed 5-bromo-2-naphthol (4) as a starting material for a multistep synthesis. This simple derivative is virtually unknown [1,2]. The most direct route to 4 is from 5-amino-2-naphthol (1) using the Sandmeyer reaction. Unfortunately, the Sandmeyer reaction fails with 1 because the hydroxyl group is too activating. Even when the hydroxyl group is protected as a methyl ether, the normal solution-phase Sandmeyer reaction employing cuprous salts is still problematic. In their preparation of 5-bromo-2-methoxynaphthalene, Dauben and co-workers resorted to pyrolysis of the diazonium ion double salt with HgBr2, but this procedure gives just a 30% yield of the bromide [3].
    [Show full text]
  • A Novel Exchange Method to Access Sulfated Molecules Jaber A
    www.nature.com/scientificreports OPEN A novel exchange method to access sulfated molecules Jaber A. Alshehri, Anna Mary Benedetti & Alan M. Jones* Organosulfates and sulfamates are important classes of bioactive molecules but due to their polar nature, they are both difcult to prepare and purify. We report an operationally simple, double ion- exchange method to access organosulfates and sulfamates. Inspired by the novel sulfating reagent, TriButylSulfoAmmonium Betaine (TBSAB), we developed a 3-step procedure using tributylamine as the novel solubilising partner coupled to commercially available sulfating agents. Hence, in response to an increasing demand for complementary methods to synthesise organosulfates, we developed an alternative sulfation route based on an inexpensive, molecularly efcient and solubilising cation exchanging method using of-the-shelf reagents. The disclosed method is amenable to a range of diferentially substituted benzyl alcohols, benzylamines and aniline and can also be performed at low temperature for sensitive substrates in good to excellent isolated yield. Organosulfates and sulfamates contain polar functional groups that are important for the study of molecu- lar interactions in the life sciences, such as: neurodegeneration1; plant biology2; neural stem cells3; heparan binding4; and viral infection5. Recent total syntheses including 11-saxitoxinethanoic acid6, various saccharide assemblies7–10, and seminolipid11 have all relied on the incorporation of a highly polar organosulfate motif. Importantly, the frst in class organosulfate containing antibiotic, Avibactam12, has led to the discovery of other novel β-lactamase inhibitors 13,14. Despite the importance of the sulfate group, there remain difculties with the ease of their synthesis to enable further biological study. Our own interest in developing sulfated molecules resulted from a medicinal chemistry challenge to reliably synthesise sulfated glycomimetics 15–18.
    [Show full text]
  • Nitration of Toluene (Electrophilic Aromatic Substitution)
    Nitration of Toluene (Electrophilic Aromatic Substitution) Electrophilic aromatic substitution represents an important class of reactions in organic synthesis. In "aromatic nitration," aromatic organic compounds are nitrated via an electrophilic aromatic substitution mechanism involving the attack of the electron-rich benzene ring on the nitronium ion. The formation of a nitronium ion (the electrophile) from nitric acid and sulfuric acid is shown below. The sulfuric acid is regenerated and hence acts as a catalyst. It also absorbs water to drive the reaction forward. Figure 1: The mechanism for the formation of a nitronium ion. The methyl group of toluene makes it around 25 times more reactive than benzene in electrophilic aromatic substitution reactions. Toluene undergoes nitration to give ortho and para nitrotoluene isomers, but if heated it can give dinitrotoluene and ultimately the explosive trinitrotoluene (TNT). Figure 2: Reaction of nitric acid and sulfuric acid with toluene. Procedure: 1. Place a 5 mL conical vial, equipped with a spin vane, in a crystallizing dish filled with ice-water placed on a stirrer. 2. Pour 1.0 mL of concentrated nitric acid into the vial. While stirring, slowly add 1.0 mL of concentrated sulfuric acid. 3. After the addition of sulfuric acid is complete, add 1.0 mL of toluene dropwise and slowly over a period of 5 minutes (slow down if you see boiling. Reaction produces a lot of heat). 4. While Stirring, allow the contents of the flask to reach the room temperature. Stir at room temperature for another 5 minutes. 5. Add 10 mL of water into a small separatory funnel.
    [Show full text]
  • Sulfur Dioxide in Workplace Atmospheres (Bubbler)
    Withdrawn Provided For Historical Reference Only SULFUR DIOXIDE IN WORKPLACE ATMOSPHERES (BUBBLER) ♦ Method Number: ID-104 Matrix: Air OSHA PEL Sulfur Dioxide (Final Rule Limit): 2 ppm (Time Weighted Limit) 5 ppm (Short-Term Exposure Limit) Sulfur Dioxide (Transitional Limit): 5 ppm (Time Weighted Limit) Collection Device: A calibrated personal sampling pump is used to draw a known volume of air through a midget-fritted glass bubbler containing 10 to 15 mL of 0.3 N hydrogen peroxide. Recommended Air Volume: 15 to 60 L Recommended Sampling Rate: 1 L/min Analytical Procedure: Samples are directly analyzed with no sample preparation by ion chromatography as total sulfate. Detection Limit Qualitative: 0.0041 ppm (60-L air volume) Quantitative: 0.010 ppm (60-L air volume) Precision and Accuracy Validation Level: 2.5 to 10.0 ppm (60-L air volume) CVT 0.012 Bias -0.046 Overall Error ±7% Method Classification: Validated Method Chemist: Ted Wilczek, Edward Zimowski Date (Date Revised): 1981 (December, 1989) Commercial manufacturers and products mentioned in this method are for descriptive use only and do not constitute endorsements by USDOL-OSHA. Similar products from other sources can be substituted. Branch of Inorganic Methods Development OSHA Technical Center Salt Lake City, Utah 1 of 9 Note: OSHA no longer uses or supports this method (November 2019). Withdrawn Provided For Historical Reference Only 1. Introduction This method describes the collection and analysis of airborne sulfur dioxide (SO2) using midget-fritted glass bubblers (MFGBs) in the workplace. It is applicable for both short-term (STEL) and time weighted average (TWA) exposure evaluations.
    [Show full text]