DOCSLIB.ORG

INA: the Engine Expert. Engine INA: The

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
INA: the Engine Expert. Engine INA: The 9996010320/05-2017 © 2017 Schaeffler Automotive Aftermarket GmbH & Co. KG INA: the engine expert. engine INA: the INA: intelligent repair solutions from a single source. Innovation, technical expertise and the highest level of product and production quality make Schaeffler not only one of the leading development partners for series production, but also a pioneering provider of spare parts and complete repair solutions. Under the INA brand, Schaeffler offers cross-system expertise in key engine systems for the automotive aftermarket. The full-range supplier‘s product portfolio includes engine components for: • Timing drives – including both belt and chain drives • Front end auxiliary drives • Valve trains • Cooling systems For these key systems, spare parts are available both as individual components and complete KITs including all required accessories. INA, the engine expert: cross-system know-how under one brand. ve V ri al d ve g n t i ra i im n T F r o n t E m n e d t s A y u s xi g li lin ar o y D Co r i v e Focusing on the requirements of the market: the INA timing drive. The INA chain drive range: Chain Drive Schaeffler is one of the leading manufacturers of timing • Chain drive component KITs drive components. Under the INA brand, the company • Timing chains offers a comprehensive range of chain and belt drives, as • Tensioning rails and guide rails well as intelligent repair solutions in the form of KITs, for • Hydraulic and mechanical chain tensioners the automotive aftermarket. The portfolio is consistently • Sprocket wheels oriented toward the requirements of the market. • Seals INA chain drive components: Simply complete. Completely simple. Diversity is just one of the features that distinguishes our range. To make installation as simple as possible, our chain drive components are also perfectly linked with all of the required accessories. INA Timing Belt KITs: Intelligently Assembled. Increased loads and stronger vibrations alongside higher the timing belt to be removed again, INA offers special KITs expectations of service life: The timing belt drive must keep that include a thermostat. That means you are optimally up with ever-increasing demands. To effectively avoid engine equipped for nearly all European and Asian vehicles. damage and consequential costs, it is recommended that you regularly replace all belt drive components according to the manufacturer‘s specifications. INA has put together intelligent KITs to ensure that the process of replacing these parts is especially simple and efficient. In addition to the timing belt and the tensioner, The INA belt drive range: deflection and guide pulleys, the KITs contain all of the • Timing Belt KIT accessories required for the repair – from screws and nuts • Timing Belt KIT with Water Pump to bolts and gaskets. Of course, everything comes in proven and Thermostat (where necessary) INA OEM quality. Timing Belt Drive • Tensioning units • Deflection pulleys As the fitted water pumps are also frequently affected by • Individual tensioning pulleys wear, more than 230 KITs from INA‘s wide range of over 750 timing belt KITs include a water pump. For engines where the thermostat is fitted directly onto the housing of the water pump and a subsequent replacement would require For a comprehensive repair: the INA front end auxiliary drive Air conditioning, steering pump, start/stop system: As a result of the growing technological complexity of Components of the INA FEAD KIT: components, the load placed on the front end auxiliary • Tensioning pulley drive (FEAD) in modern vehicles is extreme. What’s more, • Deflection pulley the forces that need to be transferred and level of vibration • Multi-ribbed belt are also increasing, and so is the potential wear. The following components may also be included, Replacing a defective individual part only helps as a depending on the specific vehicle: short-term solution. In many cases, the true cause of the damage rests with another component, but this is difficult • Over-running alternator pulley (OAP) to diagnose. As it is assembled on a vehicle-specific basis, • Torsional vibration damper the FEAD KIT from INA offers a specific recommendation • Water pump for what needs to be repaired, and enables all relevant • Accessories (e.g. screws) components to be replaced in one single work step. This ensures a high level of customer satisfaction, as it helps to avoid the need for any subsequent repairs. The front end auxiliary drives fitted in older vehicles are less complex, meaning a complete KIT is a less efficient solution. For these vehicles, you can simply use our range of approximately 1,600 individual parts, which covers over 97 % of the current vehicle fleet. FEAD Ultimate high-tech precision: the INA valve train. INA is the leading producer of all components relating to the valve train. As a driver of innovation that also offers The INA valve train range: switchable product solutions, our focus is on providing the highest level of precision during production and • Ready-to-install KITs installation. Under its INA brand, Schaeffler offers a • Camshafts comprehensive portfolio of intelligent repair solutions • Variable camshaft timers for valve trains within the independent aftermarket. • Central valves and control valves for variable camshaft timing This range includes both hydraulic and electric variable • Rocker/tappet camshaft timers and valves. They can be used to adjust • Rocker arms and finger followers the timing, which in turn increases efficiency. Bucket • Adjustment elements tappets, finger followers and swing arms are also included in the range, as well as rocker arms and rocker arm bridge. INA camshaft KITs and KITs with variable camshaft timers have also recently been added to the product portfolio. Valve Train Clever: The INA cooling system. Various solutions are currently being developed in order In addition, INA offers a market leading range of mechanical, to further reduce fuel consumption and CO2 emissions. At switchable and electric water pumps for the aftermarket. INA, the solution is „cooling on demand“, i.e. intelligently controlling the flow of heat in the vehicle. This is for In addition to the water pumps, which are also available on example enabled by the thermal management module an individual basis, the practice-oriented INA timing belt developed and produced by Schaeffler and distributed in KITs also contain tensioner, deflection and guide pulleys, the spare parts market exclusively under the INA brand. as well as the timing belt or multi-ribbed belt and any necessary accessories, such as screws, nuts and seals. The latest generation of cooling systems. The thermal management module uses sensor-controlled rotary vanes in order to regulate the temperature balance in the powertrain with precision. This means that the optimal temperature can be reached quickly in up to three additional The INA cooling system range: controlled circuits, such as the gearbox, engine oil and the • Thermal management module with water pump turbocharger. From the outset, the module controls the • Electric water pumps temperature of the engine completely according to require- • Vacuum-operated water pumps ments. As a result, the warm-up phase of the engine is • Mechanical water pumps significantly reduced and CO2 emissions are decreased by up to four percent. The thermal management module is available as a complete repair solution, including a water pump and all of the add-on parts required for performing the replacement, for 1.5 million vehicles worldwide in the VW Group. Cooling system Cooling 9996010320/05-2017 © 2017 Schaeffler Automotive Aftermarket GmbH & Co. KG Further information: www.schaeffler.com/aftermarket.
Load more

Recommended publications
  • Timing Belt Interference Caution Note: Camshaft
    Carmax 6067 170 Turnpike Rd Westborough, MA 01581 YMMS: 1991 Chevrolet Lumina Z34 Sep 3, 2020 Engine: 3.4L Eng License: VIN: Odometer: TIMING BELT INTERFERENCE CAUTION NOTE: CAMSHAFT DRIVE BELTS OR TIMING BELTS - The condition of camshaft drive belts should always be checked on vehicles which have more than 50,000 miles. Although some manufacturers do not recommend replacement at a specified mileage, others require it at 60,000-100,000 miles. A camshaft drive belt failure may cause extensive damage to internal engine components on most engines, although some designs do not allow piston-to-valve contact. These designs are often called "Free Wheeling". Many manufacturers changed their maintenance and warranty schedules in the mid-1980's to reflect timing belt inspection and/or replacement at 50,000- 60,000 miles. Most service interval schedules shown in this section reflect these changes. Belts or components should be inspected and replaced if any of the following conditions exist: Crack Or Tears In Belt Surface Missing, Damaged, Cracked Or Rounded Teeth Oil Contamination Damaged Or Faulty Tensioners Incorrect Tension Adjustment REMOVAL & INSTALLATION Tip: Timing belt CAUTION: For 1996-97 models, this application is an interference engine. Do not rotate camshaft or crankshaft when timing belt is removed, or engine damage may occur. NOTE: The camshaft timing procedure has been updated by TSB bulletin No. 47-61-34, dated December, 1994. REMOVAL Tip: timing 3.4 x motor 1. Disconnect negative battery cable. Remove air cleaner and duct assembly. Drain engine coolant. 2. Remove accelerator and cruise control cables from throttle body.
    [Show full text]
  • Timing Belt Installation
    1996 Toyota Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) Vehicle > Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Service and Repair > Procedures > Timing Belt Replace TIMING BELT INSTALLATION 1. INSTALL OIL PUMP PULLEY (a)Align the cutouts of the pulley and shaft, and slide on the pulley. (b)Using SST, install the nut. SST 09960-10010 (09962-01000, 09963-00500) Torque: 24 Nm (245 kgf-cm, 18 ft-lb) 2. INSTALL CRANKSHAFT TIMING PULLEY (a)Align the timing pulley set key with the key groove of the pulley. (b)Install the timing pulley. facing the sensor side inward. NOTICE: Do not scratch the sensor part of the crankshaft timing pulley. 3. INSTALL NO.2 IDLER PULLEY (a)Install the pulley with the bolt. Torque: 42 Nm (425 kgf-cm. 31 ft-lb) HINT: Use a bolt 42 mm (1.65 in.) in length. (b)Check that the idler pulley moves smoothly. 4. TEMPORARILY INSTALL NO.1 IDLER PULLEY AND TENSION SPRING (a)Align the bracket pin hole the pivot pin. (b)Install the pulley with the bolt. Do not tighten the bolt yet. HINT: Use a bolt 42 mm (1.65 in.) in length. (c)Install the tension spring. (d)Pry the pulley toward the left as far as it will go and tighten the bolt. (e)Check that the idler pulley moves smoothly. 5. TEMPORARILY INSTALL TIMING BELT NOTICE: The engine should be cold. (a)Using the crankshaft pulley bolt. turn the crankshaft and position the key groove of the crankshaft timing pulley upward.
    [Show full text]
  • SKF Timing Belt Kits Technical Overview
    Catalog 457702 2010 SKF Timing Belt Kits Technical overview In today’s modern automotive engines, there has been a quiet revolution. The need to run more auxiliary equipment such as water pumps or injection pumps, combined with efficiency demands and noise reduction, has caused new timing belt and tensioner systems to be developed. At first, tensioners were of a fixed nature, usually of metal design. They were simple to install: just set tension and tighten. Today, tensioners more likely include an internal spring or external damper, and non-metallic components are becoming more common. This illustration provides an overview of a modern timing belt and tensioner system. Engine-front wheel drive Belt Camshaft pulley tensioner unit Timing belt Injection pump pulley Water pump pulley Idler pulley Crankshaft The crankshaft drives the camshaft(s) and actuates the valves via a belt or a chain. Due to its advantages compared with those of a chain, namely reduced space, as well as lighter and quieter running, the timing belt is widely used by many car manufacturers. Belt tensioner unit (TBT) Idler pulley The belt tensioner unit sets the right tension and provides guidance for the belt. The idler pulley is fixed and allows the belt to be correctly wound around the driven component. The adjustment of tension during mounting is achieved by means of an eccentric Main designs currently used are shown here: or by means of a spring acting against a rear plate. The automatic belt tensioner unit, with its built-in spring and friction system, maintains a constant tension of the belt while the engine is running.
    [Show full text]
  • 1.4L/1.6L Dohc Engine Mechanical
    SECTION : 1C1 1.4L/1.6L DOHC ENGINE MECHANICAL CAUTION : Disconnect the negative battery cable before removing or installing any electrical unit or when a tool or equipment could easily come in contact with exposed electrical terminals. Disconnecting this cable will help prevent personal injury and damage to the vehicle. The ignition must also be in LOCK unless otherwise noted. TABLE OF CONTENTS SPECIFICATIONS . 1C1–2 Oil Pan. 1C1–38 Engine Specifications . 1C1–2 Oil Pump. 1C1–40 Fastener Tightening Specifcations. 1C1–5 Engine Mount. 1C1–43 SPECIAL TOOLS . 1C1–7 Camshaft Gears. 1C1–45 Special Tools Table . 1C1–7 Rear Timing Belt Cover. 1C1–46 Engine. 1C1–48 COMPONENT LOCATOR . 1C1–9 Pistons and Rods. 1C1–53 Cylinder Head. 1C1–9 UNIT REPAIR. 1C1–58 Cylinder Block. 1C1–10 Cylinder Head and Valve Train Components. 1C1–58 Intake & Exhaust Manifold. 1C1–12 Crankshaft. 1C1–65 Timing Belt. 1C1–13 Crankshaft Bearing and Connecting Rod Engine Mounting. 1C1–14 Beadings – Gauging Plastics. 1C1–74 MAINTENANCE AND REPAIR . 1C1–15 GENERAL DESCRIPTION AND SYSTEM ON–VEHICLE SERVICE. 1C1–15 OPERATION . 1C1–77 Engine Cover. 1C1–15 Cylinder Head and Gasket. 1C1–77 Camshaft Cover. 1C1–15 Crankshaft. 1C1–77 Intake Manifold. 1C1–16 Timing Belt. 1C1–77 Exhaust Manifold. 1C1–20 Oil Pump. 1C1–77 Cylinder Head and Gasket. 1C1–21 Oil Pan. 1C1–77 Camshaft. 1C1–29 Exhaust Manifold. 1C1–77 Timing Belt Check and Adjust. 1C1–30 Intake Manifold. 1C1–77 Timing Belt. 1C1–34 Camshaft. 1C1–77 1C1 – 2I1.4L/1.6L DOHC ENGINE MECHANICAL SPECIFICATIONS ENGINE SPECIFICATIONS Application Description (Manual and Automatic) 1.4L DOHC 1.6L DOHC General Data: Engine Type F14D F16D Displacement 1399 cm3 1598 cm3 (97.51 in3) Bore Stroke 77.9 x 73.4 mm (3.01 in.
    [Show full text]
  • Timing Belt Timing Belt Em0ac-02 Components
    EM-14 ENGINE MECHANICAL (2JZ-GTE) - TIMING BELT TIMING BELT EM0AC-02 COMPONENTS M/T Drive Belt Tensioner Air Cleaner Duct Oil Filler Cap x 10 No.3 Timing Belt Cover Drive Belt Tensioner Damper Gasket Fan and Fluid Coupling Assembly No.2 Timing Belt Cover No.5 Air Hose Hold-Down Camshaft Timing Pulley Clamp Water Pump Pulley Battery Drive Belt Tensioner Insulator Drive Belt Idler Pulley Battery Timing Belt Gasket S No.1 Timing Belt Cover Battery Tray Crankshaft Pulley x 5 Upper Radiator Support Timing Belt Guide PS Pump Pulley Timing Belt Plate Crankshaft Timing Pulley Lower Radiator Hose Reservoir Inlet Hose Timing Belt Tensioner Radiator Assembly Lower Electric Cooling No.2 Air Tube Radiator Fan Connector Support ECT Switch A/T Connector Engine Under Cover Hose Clamp No.2 Fan Shroud Oil Cooler Tube x 16 z Non - reusable part S precoated part S00586 1997 SUPRA (RM502U) Author: Date: 1119 EM-25 ENGINE MECHANICAL (2JZ-GTE) - CYLINDER HEAD CYLINDER HEAD EM0AG-02 COMPONENTS No.1 Air Hose Air Cleaner and MAF Meter Assembly Engine Wire Protector Air Cleaner Duct Theft Deterrent Horn Drive Belt EVAP Hose Brake Booster Vacuum Hose No.5 Air Hose Hose Clamp Heat Insulator Oil Cooler Tube (A/T) No.2 Front Exhaust Pipe S Gasket Tube Clamp S Gasket Hose Clamp Front Lower Arm Bracket Stay Upper Crossmember S Extension S Pipe Support Bracket x 16 Engine Under Cover S Non-reusable part Z13597 1997 SUPRA (RM502U) Author: Date: 1130 EM-26 ENGINE MECHANICAL (2JZ-GTE) - CYLINDER HEAD Cable Bracket No.1 Vacuum Pipe Air Inlet Duct Air Hose Heated Oxygen Sensor
    [Show full text]
  • ENGINES: an Engine Failure Is Always Bad News. Besides Taking Away
    ENGINES: An engine failure is always bad news. Besides taking away your wheels, it forces you to make a painful financial decision. If the cost to repair, overhaul or replace the engine is more than the resale value of your car or truck, the investment may not be worth it. But if your vehicle is in good condition otherwise, repairing or replacing the engine may be less expense than trading for another used vehicle (always a gamble), or taking on payments for a new car or truck. Assuming you have gotten past the initial trauma and has decided in favor of fixing the engine, you have to figure out why the engine failed so the repaired engine (or replacement engine) won't suffer the same fate. A good place to start your postmortem is to review the circumstances that preceded the failure. Sometimes failures occur unexpectedly. One minute the engine is running fine and you're keeping up with traffic, and the next you're sitting along side the road with the hood up wondering what happened. In most instances, though, there is ample warning that something is amiss long before the engine actually fails. Unusual engine noises, low oil pressure, engine overheating, loss of power, misfiring, hard starting and similar drivability and performance complaints can all be indications of problems that need attention. The underlying cause may be something minor or major. There is no way to know unless somebody checks it out. If a motorist ignores such warnings long enough, it can be a very costly mistake because eventually the engine may succumb to whatever is causing the problem, which is a classic example of the famous preventive maintenance line, "You can pay me now or you can pay me later." ENGINE OVERHEATING Overheating can be caused by any number of things.
    [Show full text]
  • Replacing the Timing Belt Replacing the Timing Belt
    "VCC -145044 EN 2009 -10 -28" Replacing the timing belt Special tools: 999 5433 , 999 5456 Removing the timing belt Note! As the illustrations in this service informationinformation araree used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct. Preparation Caution! Remove the ignition key. Remove - the screw holding the engine stabiliser brace to the bracket on the engine - the screws holding the engine stabiliser brace to the suspension turrets - the engine stabiliser brace. Applies only to B6xx4T engines: Remove the plastic pipes between the turbocharger (TC) and charge air cooler (CAC) and between the air cleaner (ACL) and turbocharger (TC). Put them to one side. Remove the clamp from the intake manifold for the turbocharger (TC) for cylinders 1, 2 and 3. Turn the upper section of the pipe towards the bulkhead. Relieve the load from the belt tensioner. Remove the auxiliaries belt. Remove the upper timing belt cover. Remove the front timing belt cover. For cars with chassis numbers 203779203779----, see Timing cover front, replacing . Lift up the servo reservoir and place it on top of the engine. Note! Ensure that the oil does not leak from the ventilation hole in the filler cap. Seal the hose between the expansion tank and the radiator. Disconnect the hose at the tank. Lift up the expansion tank and place it on top of engine. Raise the car. Remove - the right front wheel - the plastic nuts on the cover in the wing liner. Install the upper timing belt cover.
    [Show full text]
  • Engine Mechanical (EM).Pdf
    EM-1 ENGINE MECHANICAL - CO/HC CO/HC EM0D0-09 INSPECTION HINT: This check is used only to determine whether or not the idle CO/HC complies with regulations. 1. INITIAL CONDITIONS (a) Engine at normal operating temperature (b) Air cleaner installed (c) All pipes and hoses of air induction system connected (d) All accessories switched OFF (e) All vacuum lines properly connected (f) SFI system wiring connectors fully plugged (g) Ignition timing checked correctly (h) Transmission in neutral position (i) Tachometer and CO/HC meter calibrated by hand 2. START ENGINE 3. RACE ENGINE AT 2,500 RPM FOR APPROX. 180 SE- CONDS 4. INSERT CO/HC METER TESTING PROBE AT LEAST CO/HC Meter 40 cm (1.3 ft) INTO TAILPIPE DURING IDLING 5. IMMEDIATELY CHECK CO/HC CONCENTRATION AT IDLE AND/OR 2,500 RPM HINT: When doing the 2 mode (2,500 rpm and idle) test, follow the measurement order prescribed by the applicable local regula- tions. A08542 2005 LEXUS IS300 (RM1140U) Author: Date: 1266 EM-2 ENGINE MECHANICAL - CO/HC If the CO/HC concentration does not comply with regulations, troubleshoot in the order given below. (a) Check heated oxygen sensors operation (See page SF-73 ). (b) See the table below for possible causes, and then inspect and correct the applicable causes if necessary. HC CO Phenomenon Causes High Normal Rough idle 4. Faulty ignitions: S Incorrect timing S Fouled, shorted or improperly gapped plugs S Open or crossed high-tension cords 5. Incorrect valve clearance 6. Leaky intake and exhaust valves 7. Leaky cylinder High Low Rough idle 1.
    [Show full text]
  • OTC Cam Tools
    OTC Cam Tools FORD s GM s CHRYSLER OTC Cam Tools ensure correct cam timing when servicing timing belts, chains, head gaskets, or other valve train repairs. 800-533-6127 www.otctools.com OTC Cam Tools GM In-line 4-Cylinder Cam Tool Set • Required tools to service camshafts timing on 1987-2006 GM 4 cyl. overhead cam engines. • Based on OE design. • Tools organized in blow molded case. No. 6685 – GM In-line 4-Cylinder Cam Tool Set. Wt., 17 lbs., 8 oz. 6685 GM In-line 4-Cylinder Cam Tool Application Chart for 6685 Note: Some applications require more than one tool to accomplish the task. Year Make Model Engine Tool Decription OTC PN OE PN 1988-1995 Buick Skylark 2.3L Camshaft Sprocket Wrench 527046 J-36013 1990-1991 Oldsmobile Cutlass Supreme 2.3L Camshaft Sprocket Wrench 527046 J-36013 1987-1991 Oldsmobile Calais 2.3L Camshaft Sprocket Wrench 527046 J-36013 1992-1995 Oldsmobile Achieva 2.3L Camshaft Sprocket Wrench 527046 J-36013 1988-1995 Pontiac Grand Am 2.3L Camshaft Sprocket Wrench 527046 J-36013 1995 Pontiac Sunfire 2.3L Camshaft Sprocket Wrench 527046 J-36013 1996-1998 Buick Skylark 2.4L Camshaft Sprocket Wrench 527049 J-39579 1996-2002 Chevrolet Cavalier 2.4L Camshaft Sprocket Wrench 527049 J-39579 1996-1998 Oldsmobile Achieva 2.4L Camshaft Sprocket Wrench 527049 J-39579 1999-2001 Oldsmobile Alero 2.4L Camshaft Sprocket Wrench 527049 J-39579 1996-2001 Pontiac Grand Am 2.4L Camshaft Sprocket Wrench 527049 J-39579 1996-2002 Pontiac Sunfire 2.4L Camshaft Sprocket Wrench 527049 J-39579 1988-1998 Buick Skylark 2.3L/2.4L Camshaft Timing
    [Show full text]
  • Timing Belt Replacement Interval Guide
    WEATHERLY INDEX 400 CATALOG NO. 431-1448A EDITION 2010 SUPERSEDES 428-1466 (2005) Timing Belt Replacement Interval Guide Avoid Costly Engine Damage; Change Your Timing Belt At The Recommended Interval Or Every 72 Months, Which Ever Comes First. 1551 Wewatta Street, Denver, CO 80202 gates.com Printed in U.S.A. Please recycle this catalog! The World Runs on Gates. Gates is the global leader in timing belt innovation. Gates global network of technical research and development centers work with virtually every Original Equipment Manufacturer worldwide to build timing belts for new vehicles as they’re being designed. It is this strong Original Equipment (OE) relationship that enables us to develop timing system products for the Aftermarket that meet or exceed OE performance specifications. Install the original. Install Gates. OE Supplier To: • Acura • Lexus • Alfa Romeo • Mazda • Audi • Mercedes-Benz • BMW • Mini • Buick • Nissan • Cadillac • Mitsubishi • Chevrolet • Opel • Chrysler • Peugeot • Citroën • Porsche • Daewoo • Range Rover • Daihatsu • Renault • Dodge • Saab • Fiat • Scion • Ford • Skoda • Honda • Smart • Hyundai • Subaru • Infiniti • Suzuki • Isuzu • Toyota • Jaguar • Volkswagen • Kia • Volvo • Lancia And More • Land Rover UNITTA is Gates in Asia Gates Unitta Asia Company conducts business throughout all Asian countries and is an OE parts supplier to vehicle manufacturers as well as the Automotive Aftermarket. This global network of design, development and manufacturing capabilities is unmatched by any competitor for both OE and Aftermarket products. Catalog pages2.indd 1 9/23/10 12:07 PM No One Comes Close to Gates. Today, Gates is the world’s largest manufacturer of Timing Belts and Timing Component Kits (TCKs).
    [Show full text]
  • Timing Belts • All Timing Belts Need Periodic Replacement
    Timing Belts • All timing belts need periodic replacement • Critical for “Interference” engines Some engines are free running or non‐interference Other engines will have piston strike the valve if timing belt breaks or is improperly installed • Timing Belts should be replaced at recommended mileage • 60,000 – 90,000 miles are common • Timing belt should be replaced with any signs of wear Badly worn – should be replaced even if cracking is very minor Teeth can strip and not turn camshaft even if belt does not break Check for Coolant and Oil Leaks • Any coolant or oil on the timing belt will deteriorate the belt and cause early belt failure. • If timing belt drives the water pump it is best practice to replace both at the same time Replace Idlers and Tensioners on High Mileage engines Timing belt kits are available with all new rotating parts (Tensioners and idler pulleys) Check replacement Belt against old one. Not ALL belt teeth are the same style Check replacement Belt against old one. • Count the number of teeth to make sure both belts are the same. • Mark OLD belt BEFORE removing. • Mark on EACH pulley Count teeth when transferring marks from old belt to new belt Read ALL procedures • Always rotate belt by hand at least 2 revolutions to ensure timing is accurate and to set tensioners. • Tensioner pre‐load is critical • NEVER turn in opposite direction –may ruin the tensioner, may cause belt to jump a tooth when engine starts Rotate at CrankShaft • Remove spark plugs • This allows engine to turn over easier • (Mark wires as will cause misfire –rough running if plug wires on wrong plugs) • Rotating from Camshaft will over – torque cam sprocket and may cause this bolt to break! Turn This Crankshaft Counter‐Clock Wise Tensioners take up slack.
    [Show full text]
  • Ford Focus 2.0-Liter 16V Timing Belt Guide
    Tech Tips Ford Focus 2.0-liter 16V timing belt guide Significant errors are frequently committed when changing the timing belt. ContiTech Power Transmission Group provides fitters a step-by-step explanation of how to change the belt correctly in a Ford Focus 2.0-liter 16 V with engine code EDDB, EDDC, EDDD. he manufacturer recommends inspecting and, if necessary, changing Tthe timing belt and tensioning pulley at 160,000 km or after 10 years. Tip: Replace the tensioning pulley, idlers and water pump at the same time as changing the timing belt. Although the water pump is driven by the 1 multi V-belt rather than the timing belt, in this engine the pump is mounted behind the timing belt drive, and the timing belt idler is attached to the water pump. Should the water pump fail later, the entire process has to be repeated using new parts, since Ford has forbidden the continued use of used timing belts in this case. It is essential, therefore, to change the water pump as part of the package, in order to avoid later failures with unnecessary costs. The labor time is 2.2 hours. Fitters need the following special tools for the procedure: 1. Camshaft locking tool - OE (303-376) 2. Crankshaft locking tool - OE (303-574) 3. Counterhold - OE (205-072) Preparatory work Identify the vehicle using the engine code. Disconnect the vehicle battery. Do not turn the crankshaft and camshaft once the timing belt has been 2 removed. Turn the engine in the normal direction of rotation (clockwise) unless otherwise specified.
    [Show full text]