DOCSLIB.ORG

Altura Furniture, Inc. 3500 N Mississippi Avenue, Portland, OR 97227 T E L 503 288 2228 F a X 503 288 2555 W E B Altura

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Altura Furniture, Inc. 3500 N Mississippi Avenue, Portland, OR 97227 T E L 503 288 2228 F a X 503 288 2555 W E B Altura FRETWORK 84 DOORS, DRAWERS & METAL BASE 84W x 20D x 30H Shown in Medium Walnut with Satin The Fretwork features a geometric grid of raised metal inlay overlaying it’s cabinet Brass Inlay and optional Satin Brass front. Integral tab pulls extend out of the inlay pattern at functionally designed in- base. tersections to act as grasp points. Metal-capped door ends frame the composition. Fretwork is available in a variety of sizes, configurations, wood and metal finishes. Altura Furniture, Inc. 3500 N Mississippi Avenue, Portland, OR 97227 TEL 503 288 2228 FAX 503 288 2555 WEB alturafurniture.com FRETWORK CASEGOODS FRETWORK CASEGOODS 28" 36”or 42" 48" 60" 18" 20 1/4" 24" 30" LP28 D36, D42 (2 doors) D48 (2 doors) D60 (2 doors) 24" 30" LA28 w/optional metal base A36, A42 (3-drawers) X48 (1 door, 3 drawers) X60 (2 doors, 3 drawers) 30" A48 (3 drawers) A60 (6 drawers) 72" 84" 20" 30" D72 (4 doors) D84 (4 doors) 30" X72 (2 doors, 3 drawers) X84 (2 doors, 3 drawers) X72 w/optional metal base 30" A72 (6 drawers) A84 (6 drawers) DESCRIPTION FINISH OPTIONS Fretwork Casegoods: Standard - Natural / Stained: Premium - Cerused / Bleached: FretworkVeneer cabinet Casegoods: with veneered fronts and NATURAL S TAINEDCERUSED Veneer cabinet with veneered fronts and raised metal inlay. Integrated pulls. Adjustable Ash, Bronze Ash, Burnt Ash, Ebonized Ash, Bleached Ash, Cerused Ash, Cerused Bronze raised metal inlay. Integrated pulls. Adjustable Standard Cherry, Mahogany, Maple, Medium Ash, Dark Ash, Burnt Bleached Ash, Cerused Ash, shelves behindbehind doors.doors. Soft-close Soft-close doors drawer and FinishesGrey Ash, Mahogany,Walnut, Claro Medium Toned W alnut,Mahogany, Ash, EbonizedAsh, Ash, Cerused Medium BurntCer Ash,used Cerused Burnt Ash, Mahogany, Cerused Dark glides.drawers. Solid Solid wood wood base base with with levelers. levelers. Oak, Bluff Oak,Oak. Grey Oak, Fumed Oak, Walnut,Cher ry, Dark CerusedCherry, Medium Dark Mahogany,Ash, Cer Bleachedused Mahogan Walnut,y, Cer used Mahogany, Ebonized Walnut, Dark Mahogany, Cerused Oak, Inlay / Pull Options: Medium Walnut, Dark Walnut, Ebonized Walnut, Cerused Walnut, Cerused Grey Walnut, Inlay / Pull Options: Medium Walnut, Dark Walnut, Bleached Walnut, Cerused Walnut, Dark bronze, satin brass or satin Dark bronze, satin brass or satin stainless steel. Grey Walnut, Silver Walnut, Terra Walnut, BronzeGrey W alnut, CerusedSilver Walnut. Silver Walnut,Cerused Cerused Grey W Bronzealnut. Cer Walnut,used stainless steel. Walnut, Claro Toned Walnut. Cerused Oak. Silver Walnut. Standard Options: File drawers,drawers, drawer drawer inserts, inserts, removable removable back backwith wirewith management. wire management. Contrasting Contrasting wood base orfinish. optional metal base in three finishes. Custom Orders: Custom sizes, woods and finishes are Custom sizes, woods and finishes are available. Please request a price quotation. Metal Base available. Please request a price quotation. Optional Metal Base in Satin Brass, Satin Stainless Steel or Dark Bronze - at additional cost Altura Furniture, Inc. 3500 N Mississippi Avenue, Portland, OR 97227 TEL 503 288 2228 FAX 503 288 2555 WEB alturafurniture.com Altura Furniture, Inc. 3500 N Mississippi Avenue, Portland, OR 97227 TEL 503 288 2228 FAX 503 288 2555 WEB alturafurniture.com.
Load more

Recommended publications
  • Wood Flooring Installation Guidelines
    WOOD FLOORING INSTALLATION GUIDELINES Revised © 2019 NATIONAL WOOD FLOORING ASSOCIATION TECHNICAL PUBLICATION WOOD FLOORING INSTALLATION GUIDELINES 1 INTRODUCTION 87 SUBSTRATES: Radiant Heat 2 HEALTH AND SAFETY 102 SUBSTRATES: Existing Flooring Personal Protective Equipment Fire and Extinguisher Safety 106 UNDERLAYMENTS: Electrical Safety Moisture Control Tool Safety 110 UNDERLAYMENTS: Industry Regulations Sound Control/Acoustical 11 INSTALLATION TOOLS 116 LAYOUT Hand Tools Working Lines Power Tools Trammel Points Pneumatic Tools Transferring Lines Blades and Bits 45° Angles Wall-Layout 19 WOOD FLOORING PRODUCT Wood Flooring Options Center-Layout Trim and Mouldings Lasers Packaging 121 INSTALLATION METHODS: Conversions and Calculations Nail-Down 27 INVOLVED PARTIES 132 INSTALLATION METHODS: 29 JOBSITE CONDITIONS Glue-Down Exterior Climate Considerations 140 INSTALLATION METHODS: Exterior Conditions of the Building Floating Building Thermal Envelope Interior Conditions 145 INSTALLATION METHODS: 33 ACCLIMATION/CONDITIONING Parquet Solid Wood Flooring 150 PROTECTION, CARE Engineered Wood Flooring AND MAINTENANCE Parquet and End-Grain Wood Flooring Educating the Customer Reclaimed Wood Flooring Protection Care 38 MOISTURE TESTING Maintenance Temperature/Relative Humidity What Not to Use Moisture Testing Wood Moisture Testing Wood Subfloors 153 REPAIRS/REPLACEMENT/ Moisture Testing Concrete Subfloors REMOVAL Repair 45 BASEMENTS/CRAWLSPACES Replacement Floating Floor Board Replacement 48 SUBSTRATES: Wood Subfloors Lace-Out/Lace-In Addressing
    [Show full text]
  • Ornamental Floors Design and Installation
    NATIONAL WOOD FLOORING ASSOCIATION TECHNICAL PUBLICATION No. B200 ORNAMENTAL FLOORS DESIGN AND INSTALLATION the basics of creating artistic wood flooring installations. Introduction: However, it is important to have the proper knowledge rnamental floors, in all their varied forms, about the tools required and how to use them before have become an increasingly popular choice attempting custom work. (See “Tools Required,” page 5.) Ofor many consumers who want to customize Also, while this publication will help the inexperienced their homes. The description “ornamental floors” cov- installer learn some basic concepts about custom work, ers a wide variety of options, some more difficult to the best way to become proficient is by hands-on appli- execute than others. These include feature strips, pat- cation of the techniques discussed. terned floors, hand-cut scroll work, laser-cut preman- Those wishing to become more proficient at installing ufactured inlays and borders, and mixed-media ornamental floors might do so by working with an expe- installations (involving metal, stone or tile with wood). rienced custom installer, or by attending specialized An ornamental floor may be as simple as a single, seminars designed to teach custom techniques. The 3 ⁄4-inch feature strip following the room’s perimeter. Or National Wood Flooring Association conducts such sem- it may be ornate and elaborate, involving thousands of inars periodically. Several NWFA members who have pieces that combine for a true work of art. The tech- shared their skills at NWFA installation-training semi- niques used to create these flooring effects are as var- nars and who have been honored with Floor of the Year ied as the contractors who practice them.
    [Show full text]
  • The “Unknown” Maker of Marquetry Is Attributable As Buchschmid & Gretaux. I Hope You Will Publish This for Your Readers
    The “Unknown” Maker Of Marquetry Is Attributable As Buchschmid & Gretaux. I hope you will publish this for your readers because it answers a question regarding an “unknown” maker of pieces owned by your previous readers. Like all antiques, these objects were made in the context of their times, and that context stays lost until somebody interested in it digs it up later. My wife and I purchased a piece of marquetry in 2018 from an online auction, local to Northern Virginia, in a lot with other home décor, described as “Germany scene wood inlay picture” shown in the attached pictures. Fig 1: Front of “Hildesheim Knochenhauer-Amtshaus”, 9 x 12 inches framed. 1 Fig 2: Rear view of original frame; note two labels, paper taping, horizontally grained wooden back, and two-pin triangular hanger. 2 Fig 3: Close-up of labels. My parents emigrated from Germany to the U.S. in the 1950s and eventually brought back lots of ‘German stuff’ passed through our family, that I grew up with. So what follows is based on not just objective facts, but also on the context of those facts that I experienced through immersion in a culture that my parents brought with them to the U.S. As with every piece, the question is always “who made it, and when?” Here, by answering the “when” first, the “who” becomes apparent. I. “WHEN” it was made Every detail is an important clue, but I draw your attention first to the labels on the back of each of the five (5) pieces, noting the following: 1) the misspellings of “INLAYD” and “COLRED” – this identical wording appears on two pieces found on your own website.
    [Show full text]
  • Design Guide
    ® DECKING & RAILING DESIGN GUIDE 1 WHAT ARE WE MADE OF? Live Your Best Life—Outdoors The Material Difference Your outdoor living space should be a reflection of your personal You know what’s best for your outdoor living space and your lifestyle. That’s why we offer three unique material types. While we could go into detail, we’ll let the charts below and on the next style. Traditional, square decks are just the jumping off point of how page do that for us. Simply choose what’s right for you. you can use TimberTech decking to elevate your outdoor living space. But where to start? That’s where TimberTech comes in; design and technology is at the core of everything we do. CAPPED POLYMER 4-SIDED CAPPED 3-SIDED CAPPED DECKING COMPOSITE DECKING COMPOSITE DECKING UNRIVALED DESIGN AND PREMIUM STYLE AND ATTAINABLE AND ATTRACTIVE PERFORMANCE PERFORMANCE Our products, backed by premium warranties, make your deck design better, stronger, smarter, and more beautiful. Browse this guide to start bringing your design vision to life. With a wide • The most advanced synthetic • Premium composite decking • Traditional composite decking material technology without the with the added protection of a with a synthetic cap on three variety of colors, wood grains, and widths to create unique designs, use of wood particles. fully synthetic cap on all four sides and monochromatic or • Impervious to moisture. sides. color-blended options. you’ll soon be enjoying your beautifully-updated deck. • 50-Year Limited Fade & Stain • Resistant to moisture • Surface protection from ® Warranty. with Mold Guard Technology.
    [Show full text]
  • Installation Manual EXTERIOR WALL Sips March 2021
    The better way to buildTM Installation Manual EXTERIOR WALL SIPs March 2021 EXTERIOR WALL SIPs Installation Manual Table of Contents Topics General Requirements . 3 Materials . 3 Electrical Wiring . 3 Interior Finish . 4 Exterior Cladding . 4 Materials Estimating . 5 Details Air Barrier Details for Air Barrier Sealants . AB-1 Air Barrier Details for Sealing SIP Connections . AB-2 Vapour Barrier Details for Vapour Sealing SIP Connections . VB-1 Foam Core (SIP) Spline Detail . .W-1 Wood Stud Spline Joint Detail . .W-2 Typical Wall Section . .W-3 Floor-to-Wall Connection Detail . .W-4 Sill Plate Detail . .W-5 Wall Butt Corner Connection Detail . .W-6 Window Cut-Out (Non-Load Bearing Wall) . .W-7 Panel Lintel/Header Details & Bearing Conditions 1-4 . .W-8 Lintel Detail . .W-9 Point Load Detail . .W-10 Knee Wall Detail . .W-11 Door & Window Rough Openings . .W-12 Wood Ledger Attached to SIP Wall Panel . .W-13 Vertical Electrical Chase . .W-14 Exterior Wire Fastened to SIP Exterior . .W-15 Exterior Wall Cladding - Brick & Stucco . .W-16 Exterior Wall Cladding - Siding . .W-17 Interior Wall Finish - Gypsum . .W-18 Pre-Fabricated Metal Chimney Installation in Wall . .W-19 Screw Fastening Detail for Securing Shelving to Panel . W-20 60 Min. Partywall Single Wall STC Rating 50 . .PW-1 Partywall Electrical Detail (60 Min. Wall Rated Assembly (Single Wall) STC Rating 50) . .PW-2 60 Min. Partywall Double Wall STC Rating 50 . .PW-3 Partywall Electrical Detail (60 Min. Double Wall) . .PW-4 Vertical Panel Connections Spline & Corner (Timberframe) . W-TF-1 Horizontal Connections at Beams (Timberframe) .
    [Show full text]
  • Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
    Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
    [Show full text]
  • Installation Manual ROOF Sips March 2021
    The better way to buildTM Installation Manual ROOF SIPs March 2021 ROOF SIPs Installation Manual Table of Contents Topics General Requirements . 3 Materials . 3 Electrical Wiring . 3 Interior Finish . 4 Exterior Cladding . 4 Materials Estimation . 5 Details Air Barrier Details for Air Barrier Sealants . AB-1 Air Barrier Details for Sealing SIP Connections . AB-2 Vapour Barrier Details for Vapour Sealing SIP Connections . VB-1 Typical Roof Ridge . R-1 Roof Ridge Details for 12/12 Pitch Roof . R-2 Beam Pocket Detail . R-3 SIP Peak Connection (Alternative) . R-4 Roof Valley & Intermediate Roof Support . R-5 Eave Detail and Roof Support at Exterior Wall . R-6 Typical Sloped Roof Assembly . R-7 Sloped Roof Assembly with Ridge Beam . R-8 Flat Roof Assembly . R-9 Skylight Opening & Assembly . R-10 Typical Roof Connection Sections (Roof to Wall) . R-11 Roofi ng Applied to SIPs . R-12 Flat Roofi ng Applied to SIPs . R-13 LED Pot Light Installation in Ceiling SIPs . R-14 Ceiling Fan Attachment . R-15 Electrical Wire Fastened to Roof SIP . R-16 Pre-Fabricated Metal Chimney Installation . R-17 Screw Fastener Detail for Securing Load to Ceiling Panel . R-18 Roof Overhang Eave Details (Timberframe) . R-TF-1 Roof Overhang & Rake (Timberframe) . R-TF-2 Roof SIP - Installation Manual 2 March 2021 ROOF SIPs Installation Manual 1. General Requirements 1.1 Scope The basic design and construction requirements for the Thermapan Structural Insulated Panel (SIP) roof system is set forth in this specifi cation. Criteria for materials, environmental control, design loads, and structural design are included.
    [Show full text]
  • High Point Product Introductions
    HIGH POINT PRODUCT INTRODUCTIONS INTERNATIONAL | APRIL 2019 “SIMPLICITY IS THE ULTIMATE SOPHISTICATION.” Leonardo Da Vinci The incomparable Renaissance man Leonardo Da Vinci spoke these words centuries ago, but consumers are still discovering the discipline of simplicity and the wonderful sense of calm that deftly edited spaces impart. Embracing the idea that less really is more, simplicity offers an approach to modern living that while streamlined, celebrates luxury, craftsmanship and attention to detail. TA Studio by Theodore Alexander is a new brand that celebrates the art of simplicity, but with the same attention to detail upon which Theodore Alexander artisans built their reputation. TA Studio elevates simplicity to an art form. With a modern, simple and relaxed personality our new brand is rich with an array of visually elegant, clean-lined pieces designed to inspire individual expression. TA Studio by Theodore Alexander is a brand imagined to help people curate the perfect modern backdrop for how we want to live today. 2 3 LIVING ROOM LIVING ROOM PRIOUR LOVESEAT TAS45078COM Curved Outswept Back & Arms Tight Back and Seat / Four Throw Pillows PRIOUR CHAIR Sweeping Leather wrapped Legs and Edging TAS42035COM 78¼ x 37½ x 30 in | 198.75 x 95.25 x 76.2 cm Curved Outswept Back & Arms Seat height: 16 in (40.64 cm) Tight Back and Seat / Throw Pillow Arm height: 24½ in (62.23 cm) Sweeping Leather wrapped Legs and Edging 38½ x 37½ x 30 in | 97.8 x 95 x 76.2 cm Seat height: 16½ in (41.91 cm) Arm height: 25½ in (64.77 cm) PRIOUR SOFA TAS45077COM
    [Show full text]
  • Woods of Louisiana Introduction
    WWWoodsoodsoods ofofof LouisianaLouisianaLouisiana Acknowledgments: The following companies donated lumber and wood samples to help create this publication: Johnny Martin, MARTCO Partnership, LeMoyen, LA Jimmy Marionneaux, Jimmy Marionneaux Lumber Co, Livonia, LA David Williams, Kustom Kilns, Maringouin, LA Judy Miles, Jackson Lumber Co., Jackson, LA Bert Cochran, Bunkie Wood Products, Bunkie, LA Tate Lenderink of Cards of Wood, Belmont, MI, for providing the veneer cards at cost for this publication. Greg Arcenaux, Covington, LA, whose furniture appears on the front cover. Woods of Louisiana Introduction Greetings! Thank you for your interest in learning It is imperative to understand the properties of a particu- more about the wood properties of some of the timber lar wood species before selecting it for any application. The species of Louisiana. The first version of Woods of Louisi- woods of Louisiana vary considerably in density and hard- ana was extremely well received by personnel in the primary ness, so the workability of species in terms of machining, and secondary forest products industries as well as hobbyists. nailing, gluing and carving will also vary. This publication is We are pleased to revise Woods of Louisiana and provide it designed as a reference to assist in learning about the proper- to the citizens of Louisiana. ties of our native Louisiana woods. Use it to make a more informed choice for your wood working project, no matter Our state is blessed with a tremendous timber resource how big or small. We hope you’ll find it useful. of approximately half hardwoods and half softwoods. These species are becoming increasingly important throughout the Please contact us with your input so we may improve 64 Louisiana parishes and also in our global market place.
    [Show full text]
  • The Technique Marquetry
    The Technique of Marquetry Patrick Edwards (Reprinted from Woodwork Magazine, Issue Number 20, March/April 1993) When I explain to customers that I make marquetry, they either ask: “What is that?” or they exclaim: “Oh, you mean inlay!” Although excellent examples of marquetry can be found in many muse- ums and antique shops, it’s still a poorly understood technique. Developed during the Renaissance, the technique was made famous by Andre- Charles Boulle (1642-1732), who incor- porated into his designs such exotic ma- Bureau Plat with Boulle Marquetry terials as brass, pewter, horn, ivory, and Ebony, Turtoise Shell, Engraved Brass tortoise-shell, as well as hardwoods. Marquetry represents one of the most advanced forms of furniture decoration. It flourished in France in the 18th century and experienced a revival a hundred years later in England. In simple terms, marquetry and its cousin parquetry are complete surface cover- ings of decorative patterns assembled from veneer. Parquetry consists mainly of straight lines cut with a knife or veneer saw; marquetry is made up of more curved and naturalistic shapes cut with a jeweler’s saw. Inlay consists of pieces let into a solid-wood background, and is used as a decorative accent in the primary wood. The advantage of marquetry is that the cabinet itself can be made of a common wood like oak, beech, or pine, and then be completely covered with a surface decoration assembled from more exotic and rare woods. Producing a marquetry picture involves much of the patience and skill required to assemble a jigsaw puzzle. The dif- ference is that the marquetry requires making the pieces first.
    [Show full text]
  • Course Student Learning Outcomes by Discipline
    Course Student Learning Outcomes by Discipline Course Course Name SLO Number CFT 100 FUNDAMENTALS OF Students will successfully demonstrate the safe use of basic power tools and outline and perform the steps necessary to WOODWORKING square up a piece of rough lumber using power tools. CFT 105 MACHINE - Students will be able to identify different types of carcass construction and be able to demonstrate an understanding of WOODWORKING/FURNITURE the construction details of a specific piece of carcass furniture. CFT 108 BUSINESS WOODWORKING Students will analyze overhead, materials, labor and profit in order to develop pricing strategies for work. BUSINESS WOODWORKING Students will be able to identify the factors in creating a market strategy for a specific woodworking business in a given market. CFT 110A PERIOD CASE FURNITURE DESIGN Students will be able to demonstrate an understanding of the construction and design of traditional solid wood carcass furniture as it pertains to wood movement. CFT 111A PERIOD CASE FURNITURE Students will be able to show proficiency in the use of various jigs for making both through and half blind dovetails used PRODUCTION in making drawers. CFT 118 FURNITURE DESIGN Students will be able to develop a design of an original piece of furniture based on given criteria either contemporary or DEVELOPMENT period. CFT 120 ADVANCED FURNITURE LAB Students will; 1.Identify construction details needed to complete project. 2.Analyze construction details, which need further research to complete. 3.Create a plan of procedure to achieve completion of project. CFT 122 CABINETMAKING CONSTRUCTION Students will; 1.Identify construction details needed to complete project.
    [Show full text]
  • The Forestry Source
    News for forest resource professionals published by the Society of American Foresters February 2019 • Vol. 24, No. 2 National Academies: Biotechnology Has Potential to Mitigate Forest Threats By Steve Wilent ccording to a report issued in Jan- uary by the National Academies of ASciences, Engineering, and Medi- cine, “Biotechnology has the potential to help mitigate threats to North American forests from insects and pathogens through the introduction of pest-resistant traits to forest trees.” The report, Forest Health and Biotechnology: Possibilities and Consider- ations, recommends research and invest- IN THIS ISSUE ment to assess and improve the utility of biotechnology—genetic engineering and Dead Wood Is Good Wood similar technologies—as a forest-health Gillian Martin, director of the Cavity Conser- tool (see tinyurl.com/ybor9ou4). vation Initiative, based in California’s Orange At the request of the US Department County, becomes animated when she talks of Agriculture (USDA), the US about dead wood in urban areas: “We have Environmental Protection Agency (EPA), lost an appreciation of the importance of dead and the US Endowment for Forestry and wood to wildlife, not only to cavity-nesting Communities, the National Academies birds but wildlife [in general]. In my presen- assembled a Committee on the Potential tations, I tell people, ‘Nature designed trees William A. Powell, a professor at SUNY ESF, has produced transgenic American chestnuts (Castanea den- to have two lives: one as a living healthy ma- for Biotechnology to Address Forest tata), called Darling 215 and 311, center, that are resistant to chestnut blight. Left: a blight-resistant Chinese ture tree and one when it starts to decline.’ Health to investigate the potential use of chestnut (C.
    [Show full text]