User’s Guide
SRX812P SRX815 P SRX835P SRX818 S P SRX828SP 2 CONTENTS
Safety Instructions...... 4
Declaration Of Conformity...... 5
Quick Setup Guide...... 6
SRX812P, SRX815P, SRX835P Back Panel...... 8
SRX828SP, SRX818SP Back Panel...... 10
Overview - SRX800 Family...... 12
SRX812P, SRX815P - Block Diagram...... 13
SRX835P - Block Diagram...... 14
SRX818SP - Block Diagram...... 15
SRX828SP - Block Diagram...... 16
SRX812P Specifications ...... 17
SRX815P Specifications ...... 18
SRX835P Specifications ...... 19
SRX818SP Specifications ...... 20
SRX828SP Specifications ...... 21
Purposeful Product Design...... 22
Component Elements...... 23
Back Panel LCD...... 25
SRX Presets...... 27
Premium DSP Technology...... 29
Networking...... 30
Smart Device App...... 32
Loudspeaker Placement and Suspension...... 33
TroubleShooting...... 34
Warranty Information...... 35
Contact Information...... 36
3 Safety Instructions
Before You Begin - Important Safety Information Before using your SRX800® speaker system please review the following for important information on safety and protection of your investment in quality loudspeakers.
1. Read these instructions. 2. Keep these instructions. 3. Follow all instructions. 4. Heed all warnings. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. CAUTION - DO NOT PERFORM ANY SERVICING UNLESS YOU ARE QUALIFIED TO DO SO. 16. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle. 17. WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. 18. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. 19. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.
4 Declaration Of Conformity
Safety And EMC Compliance Specifications
Report No. Description EN 55103-1:2009 +A1:2012 EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions EN 55103-1:2009 +A1:2012 Magnetic Field Emissions – Annex A @ 10cm and 20cm EN 61000-3-2:2006 +A1:2008 +A2:2009 Limits for Harmonic Current Emissions (equipment input current less than or equal to 16A EN 61000-3-3:2013 Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply systems Rated Current less than or equal to 16A EN 55022:2010 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class A EN 55103-2:2009 EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 2: Immunity EN 61000-4-2:2008 Ed 2.0 Electrostatic Discharge Immunity (Environment E2-Criteria B, 4k V Contact, 8k V Air Discharge) EN 61000-4-3:2010 Ed 3.2 Radiated, Radio-Frequency, EMC Immunity (Environment E2, Criteria A) EN 61000-4-4:2007 Electrical Fast Transient/Burst Immunity (Criteria B) EN 61000-4-5:2006 Surge Immunity (Criteria B) EN 61000-4-6:2006 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (Criteria A) EN 61000-4-11:2004 Voltage Dips, Short Interruptions and Voltage Variation
Safety Standard: EN60065:2002 +A12:2011, Safety Requirements – Audio, Video, and Similar Electronic Apparatus IEC 60065:2001 Ed 7 +A1:2005 +A2:2010 CAN/CSA 60065-03 incl. A1 Safety Requirements – Audio, Video, and Similar Electronic Apparatus UL Std No. 60065-2007 Safety Requirements – Audio, Video, and Similar Electronic Apparatus UL Compliance Specifications UL 60065 7th Ed. CAN/CSA 22.2 No.60065_2003
FCC Statement FCC Radiation Exposure Statement 1. This device complies with Part 15 of the FCC Rules. This equipment complies with FCC radiation exposure limits set forth for an Operation is subject to the following two conditions: uncontrolled environment. This equipment should be installed and operated with (1) This device may not cause harmful interference. minimum distance 20cm between the radiator & your body. (2) This device must accept any interference received, including interference that may cause undesired operation. IC Warning 1. This device complies with Industry Canada licence-exempt RSS 2. Changes or modifications not expressly approved by the party responsible standard(s). Operation is subject to the following two conditions: for compliance could void the user’s authority to operate the equipment. (1) this device may not cause interference, and (2) this device must accept any interference, NOTE: This equipment has been tested and found to comply with the limits including interference that may cause undesired for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits operation of the device. are designed to provide reasonable protection against harmful interference in a residential installation. 2. Changes or modifications not expressly approved by the party responsible This equipment generates uses and can radiate radio frequency energy and, for compliance could void the user’s authority to operate if not installed and used in accordance with the instructions, may cause the equipment. harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment Le présent appareil est conforme aux CNR d’Industrie Canada applicables does cause harmful interference to radio or television reception, which can be aux appareils radio exempts de licence. L’exploitation est autorisée aux deux determined by turning the equipment off and on, the user is encouraged to conditions suivantes : try to correct the interference by one or more of the following measures: (1) l’appareil ne doit pas produire de brouillage, et • Reorient or relocate the receiving antenna. (2) l’utilisateur de l’appareil doit accepter tout brouillage • Increase the separation between the equipment and receiver. radioélectrique subi, même si le brouillage est susceptible • Connect the equipment into an outlet on a circuit different from d’en compromettre le fonctionnement.” that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
5 Quick Setup Guide
Congratulations on your purchase of JBL Professional SRX800 Series loudspeakers! We know you are anxious to get up and running as fast as possible, which is why you are reading this section. The following will help you get set up as soon as possible.
Packaging Contents Your SRX800 system should include the following: 1 x SRX800 speaker 1 x 10'(3m) IEC Power Cable 1 x Quick Start Guide
Configuration Options
MAIN MENU PRESET ? FILTERS AUTO DIM ON AUTO SLEEP OFF POWER METERS
MASTER LEVEL
BACK IN OUT
MAIN MENU CH 1 PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS MAIN MENU MAIN MENU AUTO SLEEP OFF MAIN MENU AUTO DIM ON PRESET ? FILTERS PRESET ? FILTERS POWER METERS PRESET ? FILTERS AUTO SLEEP OFF AUTO DIM ON AUTO DIM ON AUTO DIM ON POWER MASTER LEVEL METERS AUTO SLEEP OFF AUTO SLEEP OFF AUTO SLEEP OFF POWER METERS POWER METERS POWER METERS MASTER LEVEL CH2 BACK MASTER LEVEL MASTER LEVEL MASTER LEVEL IN OUT BACK NETWORK IN OUT BACK IN OUT BACK BACK IN OUT IN OUT IN OUT CH 1 CH 1 CH 1 CH 1 CH 1
LINK
CH2 DATA CH2 CH2 CH2 NETWORK SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA IN OUT CH2 NETWORK A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA IN OUT MADE IN MEXICO NETWORK NETWORK NETWORK IN OUT IN OUT IN OUT
LINK LINK DATA LINK LINK LINK DATA DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA DATA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO
MAIN MENU PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS AUTO SLEEP OFF AUTO DIM ON POWER METERS AUTO SLEEP OFF POWER METERS
MASTER LEVEL POWE MASTER LEVEL R BACK CH IN OUT BACK CH IN OUT SERIAL NO 2 1 A HARMAN .J METERS AU AU PRESET
MAIN MENU CH 1 INTERN TO TO IN MAIN MENU CH 1 IN
PRESET ? FILTERS AT SLEEP DI
MAIN MENU IONA PRESET ? FILTERS
AUTO DIM ON MAIN MENU MAIN MENU L
PRESET ? FILTERS M MAIN MENU COMP MAIN MENU AUTO SLEEP OFF AUTO DIM ON PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS MAIN MENU AN PRESET ? FILTERS MAIN MENU POWER AUTO SLEEP OFF MAIN MENU AUTO DIM ON Y METERS PRESET ? FILTERS AUTO SLEEP OFF PRESET ? FILTERS BL PROFESSIONAL NORTHRIDGE, CA US A PRESET ? FILTERS
POWER METERS PRESET ? FILTERS AUTO DIM ON DESIGNED AND ENGINEERED IN THE US AUTO DIM ON AUTO DIM ON POWER AUTO SLEEP OFF AUTO DIM ON AUTO DIM ON METERS ? FI
POWE AUTO SLEEP OFF AUTO SLEEP OFF MASTER LEVEL AUTO DIM ON POWER METERS
AUTO SLEEP OFF OU T OU T MASTER LEVEL POWER METERS AUTO SLEEP OFF POWER METERS AUTO SLEEP OFF POWE AUTO SLEEP OFF MADE IN MEXICO POWER METERS MASTER LEVEL CH2 POWER METERS LT POWER METERS R MASTER LEVEL POWER ER S METERS CH2 OF F POWE POWE BACK MASTER LEVEL ON MASTER LEVEL POWE MASTER LEVEL R MASTER LEVEL MASTER LEVEL CH BACK CH IN OUT BACK MASTER LEVEL
IN OUT A R R SERIAL NO NETWORK CH 2 IN OUT BACK CH NETWOR R 1 IN OUT A BACK NETWORK BACK HARMAN IN OUT IN OUT SERIAL NO CH CH MASTER LEVE 2 BACK BACK CH BACK CH .J IN OUT IN OUT 1 METERS AU AU PRESET A DATA CH BACK CH LIN IN OUT HARMAN IN OUT IN OUT
SERIAL NO SERIAL NO INTERN
CH 2 2
1 .J TO TO IN OUT BACK 1 1 SERIAL NO METERS AU AU PRESET A A IN IN 2
CH K
1 HARMAN HARMAN 1 AT
A INTERN CH SLEEP DI HARMAN IONA 1 .J .J TO TO METERS AU AU PRESET METERS AU AU PRESET IN CH IN MAIN MENU .J 1 L K AT
M METERS AU AU PRESET COMP INTERN INTERN CH SLEEP DI CH
1 IONA 1 TO TO TO TO
IN IN IN IN CH INTERN CH L CH 1 MAIN MENU
AN 1 1 TO TO L AT AT M IN IN COMP SLEEP DI SLEEP DI CH Y
1 IONA IONA BL PROFESSIONAL NORTHRIDGE, CA US A AT SLEEP DI
MAIN MENU MAIN MENU IONA DESIGNED AND ENGINEERED IN THE US AN L L M M COMP COMP Y MAIN MENU L BL PROFESSIONAL NORTHRIDGE, CA US A ? FI
M LINK COMP
DESIGNED AND ENGINEERED IN THE US LINK AN AN Y Y OU T OU T AN BL PROFESSIONAL NORTHRIDGE, CA US A BL PROFESSIONAL NORTHRIDGE, CA US A ? FI MADE IN MEXICO Y LT
DESIGNED AND ENGINEERED IN THE US DESIGNED AND ENGINEERED IN THE US
CH2 BL PROFESSIONAL NORTHRIDGE, CA US A DATA OU T OU T
DESIGNED AND ENGINEERED IN THE US ER S
OF F DATA CH2 ? FI ? FI ON MADE IN MEXICO LT
CH2 ? FI OU T OU T OU T OU T ER S CH2 OF F ON MADE IN MEXICO MADE IN MEXICO OU T OU T CH2 LT CH2 LT A MADE IN MEXICO
LT SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA
NETWORK ER S ER S CH2 CH2 OF F CH2 OF F ON ON IN OUT NETWORK NETWOR SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA ER S CH2 OF F A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A IN OUT NETWORK ON A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MASTER LEVE
IN OUT NETWORK MADE IN MEXICO NETWOR DATA LIN IN OUT NETWORK MADE IN MEXICO A NETWORK A MASTER LEVE BACK A IN OUT NETWORK NETWOR IN OUT NETWORK NETWOR NETWORK DATA K LIN IN OUT NETWORK NETWOR IN OUT IN OUT MASTER LEVE MASTER LEVE
IN OUT BACK DATA DATA MASTER LEVE K LIN LIN K DATA LIN BACK BACK K K L BACK K K L K K
LINK K
LINK L L
LINK L DATA LINK DATA LINK LINK LINK DATA LINK LINK LINK DATA DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA DATA DATA DATA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA DATA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO
1 2 3 4 5 6
MAIN MENU MAIN MENU PRESET ? FILTERS PRESET ? FILTERS AUTO DIM ON AUTO DIM ON AUTO SLEEP OFF AUTO SLEEP OFF POWER METERS POWER METERS MASTER LEVEL MASTER LEVEL
BACK IN BACKOUT IN OUT
CH 1 CH 1
CH2 CH2
NETWORK IN NETWOROUK T IN OUT
LINK LINK DATA DATA
SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONALA HA NORTHRIDGE,RMAN INTERN CAAT IO USNAAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO -- Standing (SRX812P, SRX815P, SRX835P) -- Standing (SRX812P, SRX815P, SRX835P) -- Standing (SRX812P, SRX815P, SRX835P) -- Standing (SRX812P, SRX815P, SRX835P) -- Standing-- Monitor (SRX812P (SRX812P, SRX815P, SRX815P), SRX835P) -- Standing (SRX812P, SRX815P, SRX835P) -- Monitor (SRX812P, SRX815P) -- Monitor (SRX812P, SRX815P) -- Monitor (SRX812P, SRX815P) -- Monitor-- Pole (SRX812P Mounted, SRX815P)(SRX12P, SRX815P, SRX835P) -- Monitor (SRX812P, SRX815P) -- Pole Mounted (SRX12P, SRX815P, SRX835P) -- Pole Mounted (SRX12P, SRX815P, SRX835P)-- Pole Mounted (SRX12P, SRX815P, SRX835P) -- Pole-- SubMounted Mounted (SRX12P (SRX812P, SRX815P, SRX815P, SRX835P), SRX835P) -- Pole Mounted (SRX12P, SRX815P, SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P)-- Sub Mounted (SRX812P, SRX815P, SRX835P) -- Sub-- MountedSuspended (SRX812P (SRX812P, SRX815P, SRX815P, SRX835P), SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P) -- Suspended (SRX812P, SRX815P, SRX835P) -- Suspended (SRX812P, SRX815P, SRX835P)-- Suspended (SRX812P, SRX815P, SRX835P) -- Suspended-- Stacked (SRX812P Subs (SRX818SP, SRX815P, SRX828SP), SRX835P) -- Suspended (SRX812P, SRX815P, SRX835P) MAIN MENU MAIN MENU PRESET ? FILTERS MAIN MENU PRESET ? FILTERS MAIN MENU PRESET ? FILTERS AUTO DIM ON PRESET ? FILTERS AUTO DIM ON AUTO DIM ON AUTO SLEEP OFF AUTO DIM ON AUTO POWESLEEPR OFF AUTO SLEEP OFF METERS AUTO SLEEP OFF POWER METERS POWER METERS POWER METERS MASTER LEVEL POWE
MASTER LEVEL MASTER LEVEL POWE MASTER LEVEL R
BACK R CH IN BACKOUT BACK CH CH IN OUT IN BACKOUT CH SERIAL NO IN OUT 2 1 SERIAL NO A 2 HARMAN 1 A .J HARMAN METERS AU AU PRESET .J
METERS AU AU PRESET CH 1 INTERN TO TO
-- Stacked Subs (SRX818SP, SRX828SP) IN IN CH 1 CH 1 INTERN TO TO AT IN IN CH SLEEP DI
1 IONA
-- Stacked Subs (SRX818SP, SRX828SP) AT SLEEP DI MAIN MENU IONA L M COMP MAIN MENU L M
-- Stacked SubsCOMP (SRX818SP, SRX828SP) -- Stacked Subs (SRX818SP, SRX828SP) -- Stacked Subs (SRX818SP, SRX828SP) AN Y AN BL PROFESSIONAL NORTHRIDGE, CA US A Y
DESIGNED AND ENGINEERED IN THE US BL PROFESSIONAL NORTHRIDGE, CA US A
DESIGNED AND ENGINEERED IN THE US ? FI ? FI OU T OU T MADE IN MEXICO OU T OU T CH2 LT MADE IN MEXICO LT ER S CH2 CH2 OF F ON ER S CH2 OF F ON
NETWORK A A IN NETWOROUK T NETWORK NETWOR
IN OUT IN OUT -- CardiodNETWOR Subs (SRX818SP, SRX828SP) NETWORK IN OUT MASTER LEVE DATA MASTER LEVE LIN DATA LIN BACK K BACK K K K L L
LINK LINK LINK LINK DATA DATA DATA DATA
SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONALA HA NORTHRIDGE,RMAN INTERN CAAT IO USNAAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONALA HA NORTHRIDGE,RMAN INTERN CAAT IO USANAL COMPANY DESIGNED AND ENGINEERED IN THE USA -- Cardiod Subs (SRX818SP, SRX828SP) MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO -- Cardiod Subs (SRX818SP, SRX828SP) -- Cardiod Subs (SRX818SP, SRX828SP) MADE IN MEXICO -- Cardiod Subs (SRX818SP, SRX828SP) -- Cardiod Subs (SRX818SP, SRX828SP)
MAIN MENU PRESET ? FILTERS AUTO DIM ON MAIN MENU MAIN MENU PRESET ? FILTERS AUTO SLEEP OFF PRESET ? FILTERS POWER AUTO DIM ON METERS AUTO DIM ON AUTO SLEEP OFF MASTER LEVEL AUTO SLEEP OFF POWER METERS POWER METERS
MASTER LEVEL BACK MASTER LEVEL IN OUT BACK BACK IN OUT IN OUT CH 1
CH 1 CH 1
CH2
CH2 NETWORK CH2 IN OUT NETWORK NETWORK IN OUT IN OUT
LINK
DATA LINK LINK
DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA
MADE IN MEXICO MADE IN MEXICO
7
MAIN MENU PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS MAIN MENU MAIN MENU AUTO DIM ON PRESET ? FILTERS AUTO SLEEP OFF PRESET ? FILTERS MAIN MENU MAIN MENU MAIN MENU POWER AUTO SLEEP OFF METERS PRESET ? FILTERS PRESET ? FILTERS PRESET ? FILTERS AUTO DIM ON AUTO DIM ON POWER METERS -- Standing (SRX812P, SRX815P, SRX835P)AUTO DIM ON AUTO DIM ON AUTO DIM ON AUTO SLEEP OFF AUTO SLEEP OFF MASTER LEVEL -- Standing (SRX812P, SRX815P, SRX835P) POWE POWER METERS POWER METERS AUTO SLEEP OFF MASTER LEVEL AUTO SLEEP OFF AUTO SLEEP OFF POWER POWER METERS METERS POWER METERS R
MASTER LEVEL MASTER LEVEL POWE POWE BACK MASTER LEVEL MASTER LEVEL
MASTER LEVEL CH IN OUT BACK CH
IN OUT R R SERIAL NO 2 1
BACK BACK A HARMAN CH CH BACK BACK CH CH
IN OUT IN OUT BACK .J AU PRESET AU IN OUT IN OUT METERS
SERIAL NO IN OUT SERIAL NO
INTERN CH 1 2 2 TO TO 1 1 A A IN IN
CH 1 HARMAN HARMAN AT DI SLEEP .J .J IONA AU PRESET AU PRESET AU AU METERS METERS MAIN MENU L
INTERN INTERN M CH 1 CH 1 COMP TO TO TO TO IN IN CH 1 CH 1 IN IN
CH AN
1 AT AT DI DI SLEEP SLEEP Y IONA IONA BL PROFESSIONAL NORTHRIDGE, CA US A MAIN MENU MAIN MENU
DESIGNED AND ENGINEERED IN THE US L L M M COMP COMP ? FI AN AN Y Y OU T OU T BL PROFESSIONAL NORTHRIDGE, CA US A BL PROFESSIONAL NORTHRIDGE, CA US A
MADE IN MEXICO DESIGNED AND ENGINEERED IN THE US DESIGNED AND ENGINEERED IN THE US CH2 LT ? FI ? FI ER S CH2 OF F ON OU T OU T OU T OU T MADE IN MEXICO MADE IN MEXICO CH2 CH2 LT LT A ER S ER S NETWORK CH2 CH2 OF F OF F
CH2 ON ON IN OUT NETWORK NETWOR IN OUT MASTER LEVE DATA LIN NETWORK NETWORK A A NETWOR NETWOR IN OUT IN OUT NETWORK NETWORK BACK
IN OUT IN OUT NETWORK K
IN OUT MASTER LEVE MASTER LEVE DATA DATA LIN LIN K
-- Monitor (SRX812P, SRX815P) BACK BACK K K -- Monitor (SRX812P, SRX815P) L K K LINK LINK L L DATA LINK LINK DATA LINK LINK LINK DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA DATA DATA DATA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO ---- P Poleole Mounted Mounted (SRX12P (SRX12P, SRX815P, SRX815P, SRX835P), SRX835P) MADE IN MEXICO ---- Sub Sub Mounted Mounted (SRX812P (SRX812P, SRX815P, SRX815P, SRX835P), SRX835P) ---- Suspended Suspended (SRX812P (SRX812P, SRX815P, SRX815P, SRX835P), SRX835P) ---- Stacked Stacked8 Subs Subs (SRX818SP (SRX818SP, SRX828SP), SRX828SP) 9 ---- Cardiod Cardiod Subs Subs (SRX818SP (SRX818SP, SRX828SP), SRX828SP)
MAIN MENU PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS AUTO SLEEP OFF AUTO DIM ON POWER METERS AUTO SLEEP OFF POWER METERS
MASTER LEVEL POWE MASTER LEVEL R BACK CH IN OUT BACK CH IN OUT SERIAL NO 2 1 A HARMAN .J METERS AU AU PRESET
CH 1 INTERN TO TO IN CH 1 IN AT SLEEP DI IONA MAIN MENU L M COMP AN Y
6. Subs with 3-way splayed BL PROFESSIONAL NORTHRIDGE, CA US A
1. Floor Standing DESIGNED AND ENGINEERED IN THE US ? FI OU T OU T MADE IN MEXICO CH2 LT ER S CH2 OF F ON
NETWORK A
IN OUT NETWORK NETWOR IN OUT MASTER LEVE DATA LIN BACK K K L
LINK LINK DATA DATA
SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO -- Standing-- Standing (SRX812P (SRX812P, SRX815P, SRX815P,-- SRX835P) Standing, SRX835P) (SRX812P, SRX815P, SRX835P) 7. Stacked Subs MADE IN MEXICO -- Monitor-- Monitor (SRX812P (SRX812P, SRX815P), SRX815P)-- Monitor (SRX812P, SRX815P)2. Monitor -- Pole-- Mounted Pole Mounted (SRX12P (SRX12P, SRX815P,-- SRX815P Pole, SRX835P) Mounted, SRX835P) (SRX12P3., SRX815P Pole, SRX835P) Mounted 8. Cardiod Subs -- Sub --Mounted Sub Mounted (SRX812P (SRX812P, SRX815P--, SRX815PSub, SRX835P) Mounted, SRX835P) (SRX812P, SRX815P, SRX835P) -- Suspended-- Suspended (SRX812P (SRX812P, SRX815P, SRX815P-- Suspended, SRX835P), SRX835P) (SRX812P, SRX815P4. Sub, SRX835P) Mounted 9. Cardiod Subs Vertical -- Stacked-- Stacked Subs (SRX818SP Subs (SRX818SP, SRX828SP)-- ,Stacked SRX828SP) Subs (SRX818SP, SRX828SP) -- Cardiod-- Cardiod Subs (SRX818SP Subs (SRX818SP, SRX828SP)-- , CardiodSRX828SP) Subs (SRX818SP5., SRX828SP)Suspended
-- Standing (SRX812P, SRX815P, SRX835P) -- Monitor (SRX812P, SRX815P) 6 -- Pole Mounted (SRX12P, SRX815P, SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P) -- Suspended (SRX812P, SRX815P, SRX835P) -- Stacked Subs (SRX818SP, SRX828SP) -- Cardiod Subs (SRX818SP, SRX828SP) Quick Setup Guide
LCD Screen
Power LED
Power Button Master Encoder MAIN MENU PRESET 2 MAIN AUTO DIM OFF AUTO SLEEP ON CH1 Direct Out POWER METERS
MASTER LEVEL Back Button CH1 Input BACK IN OUT
CH1 Encoder CH 1 MIX OUT Mix Out CH2 Encoder CH2 NETWORK IN OUT CH2 Input Ethercon Connector
CH2 Direct Out LINK DATA Link LED
SERIAL NO. JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO Data LED
Locking IEC Inlet
Power it on way before plugging in your audio source. Turn CH1 and/or CH2 Encoders to the left until the level reads “- 100” on the LCD.
2. Connect XLR or TRS cable from audio source to CH1 and/or CH2 Inputs.
3. Select LINE, CONSUMER or MIC gain setting by pushing the correct CHANNEL ENCODER twice. You will see a rectangle highlighting the sensitivity setting. Simply roll the encoder 1. Connect the supplied power cord to the Blue IEC inlet on left or right to select the correct setting. Once the correct the rear of the speaker setting is shown, push the encoder one more time to make your selection. 2. Connect the power cord to an available power outlet. Once the power cord is plugged into the power source, the Green Power LED will illuminate. Set output levels
3. Once the Green Power LED illuminates, press the Power 1. Set the gain level for each input using the CH1 and/or CH2 Button. After several seconds, you will notice the LCD ENCODER. The input level meter on the LCD will allow you to Screen boot and you will now be on the main screen. monitor your input level.
Plug in the inputs 2. Once the input level is set, user the MASTER ENCODER to turn up (Right) or turn down (Left) the overall level until the 1. The CH1 and CH2 Input levels and Master Level default desired volume is reached. to -20dB. It’s a good idea to turn the inputs down all the
7 SRX812P, SRX815P, SRX835P Back Panel
LCD Screen
Power LED
Power Button Master Encoder MAIN MENU PRESET 2 MAIN AUTO DIM OFF CH1 Direct Out AUTO SLEEP ON POWER METERS
MASTER LEVEL CH1 Input Back Button BACK IN OUT
CH1 Encoder CH 1 MIX OUT
Mix Out
CH2 Encoder CH2
NETWORK IN OUT CH2 Input Ethercon Connector
CH2 Direct Out LINK Link LED DATA
SERIAL NO. JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO Data LED
Locking IEC Inlet
8 SRX812P, SRX815P, SRX835P Back Panel
LCD Screen Master Encoder Allows users to access presets and basic controls for the system without a Controls the master volume of the unit. By turning the knob counter-clockwise network connection. Controlled with the Master Encoder and the Back Button. you will be lowering the overall volume of the speaker. By turning the control clockwise you will be increasing the overall volume of the speaker. See page Power LED 25 for instructions on using the Master Encoder to control LCD screen. This LED (Green) lights to indicate that the speaker is plugged in and that power is going to the speaker. . Back Button Used in conjunction with the Master Encoder to control the LCD Screen. Power Button Turns the power on. Mix Out This XLR (male) output connector provides a method of sending audio CH1 Input out to an external source. Passes signal based on the input levels of channels These balanced inputs accepts a standard XLR (female) connector and also 1 and 2 post DSP, adding some latency (approx. 2 milliseconds) to the signal. a 1/4” TRS phone plug. A broad range of signals from microphones, audio mixing consoles and electronic musical instruments may be connected here. Ethercon Connector Allows network connection with a standard Ethernet cable for networking CH1 Direct Out multiple units and controlling the system. This connector is not to be Male balanced XLR output connector. Passes signal directly from the input connected to a LAN line. to the output, bypassing DSP for zero latency. This connector provides a full- range signal which can be daisy chained to another speaker. Link LED This LED lights to indicate that the speaker is connected to a network. CH1 Encoder Controls the gain of CH1. By turning the signal counter-clockwise you will be Data LED lowering the gain of your source material. By turning the control clockwise you This LED blinks to indicate that data is being sent and received by the system. will be increasing the gain.
CH2 Input These balanced inputs accepts a standard XLR (female) connector and also a 1/4” TRS phone plug. A broad range of signals from microphones, audio mixing consoles and electronic musical instruments may be connected here.
CH2 Direct Out Male balanced XLR output connector. Passes signal directly from the input to the output, bypassing DSP for zero latency. This connector provides a full- range signal which can be daisy chained to another speaker.
CH2 Encoder Controls the gain of CH2. By turning the signal counter-clockwise you will be lowering the gain of your source material. By turning the control clockwise you will be increasing the gain.
Locking IEC Inlet Standard IEC AC mains input connector.
9 SRX828SP, SRX818SP Back Panel
LCD Screen
Power LED
Power Button Master MAIN MENU PRESET 2 MAIN Encoder AUTO DIM OFF CH1 Direct Out AUTO SLEEP ON POWER METERS
MASTER LEVEL CH1 Input Back Button BACK IN OUT
CH 1
CH2
NETWORK IN OUT CH2 Input Ethercon Connector
CH2 Direct Out LINK Link LED DATA
SERIAL NO. JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO Data LED
Locking IEC Inlet
10 SRX828SP, SRX818SP Back Panel
LCD Screen Master Encoder Allows users to access presets and basic controls for the system without a Controls the master volume of the unit. By turning the knob counter-clockwise network connection. Controlled with the Master Encoder and the Back Button. you will be lowering the overall volume of the speaker. By turning the control clockwise you will be increasing the overall volume of the speaker. See page Power LED 25 for instructions on using the Master Encoder to control LCD screen. This LED (Green) lights to indicate that the speaker is plugged in and that power is going to the speaker. Back Button Used in conjunction with the Master Encoder to control the LCD Screen. Power Button Turns the power on. Ethercon Connector Allows network connection with a standard Ethernet cable for networking CH1 Input multiple units and controlling the system. This connector is not to be These balanced inputs accepts a standard XLR (female) connector and also connected to a LAN line. a 1/4” TRS phone plug. A broad range of signals from microphones, audio mixing consoles and electronic musical instruments may be connected here. Link LED This LED lights to indicate that the speaker is connected to a network. CH1 Direct Out Male balanced XLR output connector. Passes signal directly from the input Data LED to the output, bypassing DSP for zero latency. This connector provides a full- This LED blinks to indicate that data is being sent and received by the system. range signal which can be daisy chained to another speaker.
CH2 Input These balanced inputs accepts a standard XLR (female) connector and also a 1/4” TRS phone plug. A broad range of signals from microphones, audio mixing consoles and electronic musical instruments may be connected here.
CH2 Direct Out Male balanced XLR output connector. Passes signal directly from the input to the output, bypassing DSP for zero latency. This connector provides a full- range signal which can be daisy chained to another speaker.
Locking IEC Inlet Standard IEC AC mains input connector.
11 Overview - SRX800 Family
SRX812P SRX815P SRX835P SRX818SP SRX828SP
Thank you for purchasing the new JBL SRX800! The SRX800 Series is the next generation high performance powered loudspeaker system from JBL Professional. Comprising three full range and two subwoofers, the SRX800 boasts an array of premium features that make it the very best system in its class. Drawing on JBL’s long history of groundbreaking technology and innovative loudspeaker design, the SRX800 Series meets the needs of the most demanding applications where high performance, comprehensive control and legendary JBL sound are required. Each component in the SRX800 Series was purposefully designed and thought through with full consideration for its intended use, each component carefully matched to achieve a perfectly tuned system that is both powerful and easy to use.
The full range 12” two-way, 15” two-way and 15” three-way systems are powered by proprietary 2,000 Watt Crown amplification. The 18” subwoofer and 18” dual subwoofer feature 1,000 and 2,000 Watt Crown amplifiers. All models integrate Crown’s Proprietary Front-End DriveCore Technology, premium JBL user-configurable DSP, including V5 Tunings compatible with our flagship Vertec and VTX touring systems, and full HiQnet Network control with Mac and PC software and standalone applications for iOS and Android. Now, local touring houses and smaller to medium installations can deploy a no-compromise, all-in-one solution configurable as a full range system with monitors and subs, either floor standing, tripod mounted, stacked, or pole mounted, and fully flyable with the SRX800’s integrated suspension points.
12 SRX812P, SRX815P - Block Diagram
13 SRX835P - Block Diagram HF MR LF CROSSOVER CH1 CH2 LIM LIMIT LPF HPF DSP SIGNAL GAIN MASTER EQ PRESETS ∑ LEVEL 2 LEVEL 1 SIGNAL 2 SIGNAL 1 ADC DAC MIC LINE CONSUMER MIC LINE CONSUMER IN IN OUT OUT MIX CH1 CH2
14 SRX818SP - Block Diagram
15 SRX828SP - Block Diagram
16 SRX812P Specifications
System Specification System Type: Self powered 12”, two-way, bass-reflex Maximum SPL Output: 136dB Frequency Range (-10dB): 40Hz - 21kHz Frequency Response (-3dB): 48Hz - 20kHz Amplification System Power Rating: 2000W Peak, 1500W Continuous Input Impedance: 40k balanced, 20k unbalanced Line Input Gain: 21 dB Consumer Input Gain: 33 dB Mic Input Gain: 45 dB Maximum Input Level: • Line: 20dBu • Consumer: 8dBu • Mic: -4dBu Connectors: Neutrik 1/4 - XLR input; Neutrik XLR Output LED Indicators: Power LED (Green), Network Link (Green), Network Data (Yellow) Cooling: On-Demand variable speed fan AC Power Input: 100 - 240V~ 50/60Hz AC Power Consumption (120V~): 2.2A (1/8th Power), 5.6A (1/3rd Power) Speaker Specification LF Driver: 2272F HF Driver: 2432H Coverage Pattern: 90 x 50 Crossover Frequency: 1.9kHz Enclosure Material: 18mm plywood Monitor Angle: Yes Suspension/Mounting: Dual 36mm pole socket, 12 x M10 Suspension points Handles: 3 Finish: Obsidian Duraflex™ finish Grille: Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing Dimensions: (L x W x H): 16.87” x 16.31” x 25.11” (429mm x 415mm x 638mm) Weight: 58.0 lbs (26.4kg) Shipping Weight: 67 lbs (30.5kg)
*For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at http://www.jblpro.com/www/products/portable-market/srx800-series
428 mm 16.87 in
414 mm 16.31 in
638 mm 25.11 in
Bottom View FrontSR ViewX812P Left View Rear View 479 mm 18.82 in 17 458 mm 18.03 in
691 mm 27.20 in
SRX815P 476 mm 18.74 in
544 mm 21.40 in
984 mm 38.74 in
SRX835P
684 mm 683 mm 26.92 in 26.89 in
575 mm 22.62 in
SRX818SP
1204 mm 680 mm 47.42 in 26.79 in
573 mm 22.57 in
SRX828SP SRX815P Specifications
System Specification System Type: Self powered 15”, two-way, bass-reflex Maximum SPL Output: 137dB Frequency Range (-10dB): 36Hz - 21kHz Frequency Response (-3dB): 44Hz - 20kHz Amplification System Power Rating: 2000W Peak, 1500W Continuous Input Impedance: 40k balanced, 20k unbalanced Line Input Gain: 21 dB Consumer Input Gain: 33 dB Mic Input Gain: 45 dB Maximum Input Level: • Line: 20dBu • Consumer: 8dBu • Mic: -4dBu Connectors: Neutrik 1/4 - XLR input; Neutrik XLR Output LED Indicators: Power LED (Green), Network Link (Green), Network Data (Yellow) Cooling: On-Demand variable speed fan AC Power Input: 100 - 240V~ 50/60Hz AC Power Consumption (120V~): 2.2A (1/8th Power), 5.6A (1/3rd Power) Speaker Specification LF Driver: 2275F HF Driver: 2432H Coverage Pattern: 90 x 50 Crossover Frequency: 3kHz Enclosure Material: 18mm plywood Monitor Angle: Yes Suspension/Mounting: Dual 36mm pole socket, 12 x M10 Suspension points 428 mm Handles: 3 16.87 in Finish: Obsidian Duraflex™ finish 414 mm Grille:16.31 in Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing Dimensions (L x W x H): 18.82” x 18.03” x 27.20” (478mm x 458mm x 691mm) Weight: 63.0 lbs (28.6kg) 638 mm Shipping Weight: 25.11 in 73.0 lbs (33.2kg)
*For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at http://www.jblpro.com/www/products/portable-market/srx800-series
SRX812P 479 mm 18.82 in
458 mm 18.03 in
691 mm 27.20 in
Bottom View FrontSR ViewX815P Left View Rear View 476 mm 18.74 in 18 544 mm 21.40 in
984 mm 38.74 in
SRX835P
684 mm 683 mm 26.92 in 26.89 in
575 mm 22.62 in
SRX818SP
1204 mm 680 mm 47.42 in 26.79 in
573 mm 22.57 in
SRX828SP SRX835P Specifications
System Specification System Type: Self powered 15”, three-way, bass-reflex Maximum SPL Output: 137dB Frequency Range (-10dB): 33Hz - 21kHz Frequency Response (-3dB): 41Hz - 20kHz Amplification System Power Rating: 2000W Peak, 1500W Continuous Input Impedance: 40k balanced, 20k unbalanced Line Input Gain: 21 dB Consumer Input Gain: 33 dB Mic Input Gain: 45 dB Maximum Input Level: • Line: 20dBu • Consumer: 8dBu • Mic: -4dBu Connectors: Neutrik 1/4 - XLR input; Neutrik XLR Output LED Indicators: Power LED (Green), Network Link (Green), Network Data (Yellow) Cooling: On-Demand variable speed fan
AC Power Input: 100 - 240V~ 50/60Hz428 mm AC Power Consumption (120V~): 2.2A (1/8th Power), 16.875.6A in (1/3rd Power)
414 mm Speaker16.31 in Specification LF Driver: 2275F
MF Driver: 638 mm 2107H HF Driver: 25.11 in 2432H Coverage Pattern: 60 x 40 Crossover Frequency: 330Hz & 2.4kHz
Enclosure SRX812P Material: 18mm plywood 479 mm Suspension/Mounting: Single 36mm pole socket,18.82 in 12 x M10 Suspension points Handles: 2 458 mm Finish:18.03 in Obsidian Duraflex™ finish Grille: Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing Dimensions (L x W x H): 18.74” x 21.4” x 38.74” (476mm x 544mm x 984mm) 691 mm Weight: 27.20 in 85.0 lbs (38.6kg) Shipping Weight: 97.0 lbs (44.0kg)
*For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at http://www.jblpro.com/www/products/portable-market/srx800-series SRX815P 476 mm 18.74 in
544 mm 21.40 in
984 mm 38.74 in
Bottom View FrontSR ViewX835P Left View Rear View
684 mm 683 mm 26.92 in 26.89 in 19
575 mm 22.62 in
SRX818SP
1204 mm 680 mm 47.42 in 26.79 in
573 mm 22.57 in
SRX828SP SRX818SP Specifications
System Specification System Type: Self powered 18”, subwoofer system Maximum SPL Output: 135dB Frequency Range (-10dB): 29Hz - 150Hz Frequency Response (-3dB): 35Hz - 120Hz Amplification System Power Rating: 1000W Peak , 750W Continuous Input Impedance: 40k balanced, 20k unbalanced Line Input Gain: 21 dB 428 mm Maximum Input Level: 16.87 in • Line: 20dBu 414 mm Connectors:16.31 in Neutrik 1/4 - XLR input; Neutrik XLR Output LED Indicators: Power LED (Green), Network Link (Green), Network Data (Yellow) Cooling: On-Demand variable speed fan 638 mm AC Power Input: 25.11 in 100 - 240V~ 50/60Hz AC Power Consumption (120V~): 2.2A (1/8th Power), 5.6A (1/3rd Power) Speaker Specification LF Driver: 2279F Crossover Frequency: 80HzSRX812P 479 mm 18.82 in Enclosure 458 mm Material: 18.03 in 18mm plywood Suspension/Mounting: M20 Threaded Pole Mount Handles: 4 Finish: 691 mm Obsidian Duraflex™ finish 27.20 in Grille: Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing Dimensions (L x W x H): 26.89” x 26.92” x 22.62” (683mm x 684mm x 575mm) Weight: 87.0 lbs (39.5kg) Shipping Weight: 103 lbs (46.8kg) SRX815P *For exact specifications including precise placement of suspension476 mm points and frequency response curves for JBL presets, find spec sheets at 18.74 in http://www.jblpro.com/www/products/portable-market/srx800-series
544 mm 21.40 in
984 mm 38.74 in
SRX835P
684 mm 683 mm 26.92 in 26.89 in
575 mm 22.62 in
Bottom View FrontSR XView818SP Left View Rear View
1204 mm 680 mm 20 47.42 in 26.79 in
573 mm 22.57 in
SRX828SP SRX828SP Specifications
System Specification
System Type: Self powered dual 18”, subwoofer428 mmsystem Maximum SPL Output: 141dB 16.87 in
Frequency Range414 (-10dB): mm 29Hz - 150Hz Frequency Response16.31 (-3dB):in 35Hz - 120Hz
Amplification 638 mm System Power Rating: 25.11 in2000W Peak (1000W x 2), 1500W continuous (750W x 2) Input Impedance: 40k balanced, 20k unbalanced Line Input Gain: 21 dB Maximum Input Level: • Line: 20dBu SRX812P Connectors: Neutrik 1/4 - XLR input; Neutrik479 XLR mm Output LED Indicators: Power LED (Green), Network Link18.82 (Green), in Network Data (Yellow) Cooling: On-Demand variable speed fan 458 mm AC Power Input: 18.03 in 100 - 240V~ 50/60Hz AC Power Consumption (120V~): 2.2A (1/8th Power), 5.6A (1/3rd Power)
691 mm Speaker Specification27.20 in LF Driver: (2x) 2279F Crossover Frequency: 80Hz Enclosure Material: 18mm plywoodSRX815P 476 mm Handles: 8 18.74 in Finish: Obsidian Duraflex™ finish Grille: 544 mm Powder coated, Obsidian, 14-gauge perforated steel with acoustically transparent black cloth backing Dimensions (L x W21.40 x H): in 26.79” x 47.42” x 22.57” (681mm x 1205mm x 574mm) Weight: 145.0 lbs (65.9kg) Shipping Weight: 165.0 (75.0kg) 984 mm 38.74 in *For exact specifications including precise placement of suspension points and frequency response curves for JBL presets, find spec sheets at http://www.jblpro.com/www/products/portable-market/srx800-series
SRX835P
684 mm 683 mm 26.92 in 26.89 in
575 mm 22.62 in
SRX818SP
1204 mm 680 mm 47.42 in 26.79 in
573 mm 22.57 in
Bottom View SRFrontX82 View8SP Left View Rear View
21 Purposeful Product Design
Portability made easy The SRX800 series was designed as a versatile all-in-one solution for a variety of applications including touring and permanent installations. Special attention was given to the needs of consumers who require a high level of ruggedness, reliability, and portability. To those ends, these systems feature 14 gauge steel grilles with “L” beam indents on either side for increased structural rigidity. The speakers are constructed from 18mm plywood to withstand drops, bumps and whatever else will be thrown at them. All models feature our patented DuraFlex coating which is made to survive years of abuse.
To make sure the speakers are easy to move around and comfortable to use, engineers developed an ergonomic handle cup that allows users to pick the speakers up without cutting off circulation to their hands. Also included are multiple M10 suspension points and rubber feet for the monitor angle so that whether the speakers are suspended, used as stage monitors, mounted to a pole or tripod, or stood on the floor or a shelf, they will stay securely in place and deliver sound wherever it’s needed. The subwoofers have indexing feet for stacking in both standard and cardioid configurations. The back panel features glow in the dark ink and an LED screen so that users can connect and control the speaker in darker areas without having to turn on lights or reach for a control device.
Pole Mount M10 Suspension Points Multiple Handles & Indexed Feet
Side Handle Secure Stacking Monitor Position
22 Component Elements
High Performance Without Compromise From the brand new transducers to the 14-guage steel grilles, each component in the SRX800 Series was specifically designed for optimal performance in these systems. Featuring a purpose-built Crown amplifier and a full suite of user configurable DSP, these systems deliver the latest technologies from Harman Professional in one easy to use, high performing platform.
2432H HF Driver High frequencies are handled by the JBL 2432H 3” voice-coil Compression Driver - the only 3” voice coil in this class. In addition to the weight reduction provided by neodymium, the large voice coils and diaphragms in these drivers are capable of handling very high power levels with reduced distortion and increased phase coherence resulting in smooth, crystal clear high frequencies.
Low Frequency Drivers JBL’s patented Differential Drive® Technology ferrite drivers incorporate 3” voice coils with lower mass ferrite magnets for reduced weight while maximizing power amp efficiency with greater heat dissipation and increased power handling resulting in exceptionally low distortion and extended low frequency response.
Mid Frequency Drivers SRX835’s midrange driver is derived from the midrange transducer on the VTX 20 touring line array system. The outside cast aluminum frame acts as the structural support, acoustic cavity, and heat sink for the driver, optimizing both space in the speaker cabinet and the performance of the system at the same time.
Patented (PT) Waveguides High frequency drivers use JBL’s patented Progressive Transition Waveguides which offer dramatically improved constant beamwidth and directivity, lower distortion, and overall smooth frequency response free of high-Q peaks. Wide coverage angles are achieved without compromise and harmonic distortion is minimized to allow maximum SPL capability of the compression drivers without harshness.
23 Component Elements
HiQnet Network Control With full HiQnet Network Integration, configuring an SRX800 system is dramatically simplified, saving time while fully automating the control interface configuration. Simple wired control is provided via Ethercon connector and third party wireless router capability is included. Control options include Audio Architect, HiQnet Motion Control™ iOS app, and SRX Connect, a standalone app for iOS and Android.
Premium DSP Technology A full suite of User configurable DSP driven by the SRX800 series’ powerful onboard 400mHz Sharc DSP includes 20 PEQs, up to 2 seconds of delay, signal generators, input mixing, amplifier monitoring, and 50 User Presets. In addition, the system features 96kHZ FIR filters, LevelMax™ Limiting, and is compatible with V5 JBL Tunings, providing compatibility with our flagship Vertec and VTX touring systems.
Crown DriveCore Technology Amplification Each model is powered by Crown Proprietary Front-End DriveCore technology featuring a massive 2000W Power Rating, the highest power rating in this class of loudspeakers. With an outstandingly high 103dB signal-to-noise ratio, the SRX800 Series is capable of massive sound pressure levels with exceptional headroom, very low distortion and absolute clarity throughout its frequency range. A true universal power supply w/ PFC and locking IEC power cords ensure quick and secure connection for easy setups.
24 IP address subnet IP address HiQnetIP address address subnetDHCP HiQnetIPsubnet address address HiQnetinformationsubnet address IP DHCPaddress HiQnetinformationIP DHCPaddress address informationsubnetDHCP HiQnetinformation address DHCP information
Back Panel LCD
INTRO JBL SRX815P 1 2 INTRO Introduction INTRO The LCD Screen on the back panel of the speaker allows basic control of the system, as well as JBL SRX815P access to presets and network settings. JBL SRX815P 0.0INTRO JBL SRX815P 0.0INTRO Plug in the system and power it on. Once the amp boots up, this screen will be displayed. This MAIN 0.0INTRO JBL SRX815P screen will also be displayed after one minute of inactivity. It can also be accessed by pressing JBL SRX815P MAIN 0.0 the Back Button 5 times to exit all menus. MAIN 0.0 1. Speaker Model Name MAIN INPUT0.0 SCREEN 4 3 2. Master Attenuator Level. Turn the Master Encoder to adjust between -100 and +12 channelMAIN 1 3. Main Output Meter MAIN INPUT SCREEN INPUT SCREEN 4. Preset Indicator channel 1 channel 1 INPUT0.0 SCREEN 1 3 Input Screen channel 1 INPUT0.0 SCREEN From the Home Screen, press either one of the Channel Encoders to access the Input Screen for sensitivitY line INPUT0.0 SCREEN the channel. Press the Back Button or wait one minute to return to the Home Screen. channel 1 channel 1 sensitivitY line 0.0 sensitivitY line 1. Channel Indicator. Press the other Channel Encoder to switch channels. 0.0 2. Input Attenuator Level. Turn the Channel encoder to adjust from -80 to +12. sensitivitY line 0.0 MAIN MENU 3. Channel Input Meter MAIN MENU sensitivitY line MAIN MENU 4. Sensitivity Setting Indicator. Press the Channel Encoder to highlight the setting, then turn to sensitivitYPRESET line1 MAIN adjust between Line (default,) Consumer, and Mic. Once the desired level is selected, press MAIN MENU MAIN MENU AUTO4 DIMMAIN MENU 2 OFF the Channel Encoder down again to set it. PRESET 1 MAIN MAI MENUN PRESETAUTO SLEEPMAIN MENU1 MAIONN AUTO DIM MAINOFF MENU Main Menu AUTOMETERSPRESET DIM 1 MAIN MAIOFF MENUN AUTO SLEEPMAIN MENU ON From the Home Screen, press the Master Encoder to access the Main Menu. Loudspeaker AUTO SLEEPDIMMAIN MENU OFFON Settings and Presets are accessed from the Main Menu PRESETMETERS 1 MAIN METERSPRESETAUTO SLEEP 1 MAIONN AUTO DIM OFF AUTOMETERS DIM OFF Presets AUTO SLEEP PRESETSON AUTO SLEEP ON From the Main Menu, turn the Master Encoder until “Preset” is highlighted. Press the Master METERS MAIN MENU Encoder to access Presets. Turn the Master Encoder to scroll through Presets and then press the METERS PRESETS PRESET 1 MAIN Master Encoder to select the desired Preset. Once the Preset is selected, you will be returned to MAIN MENU PRESETS AUTO DIMMAIN MENU OFF the Main Menu. Hitting the Back Button at any time will also return you to the Main Menu. PRESET 1 MAIPRESETSN PRESETAUTO SLEEPMAIN MENU1 MAIONN AUTO DIM PRESETSOFF Auto Dim AUTOMETERSPRESET DIM 1 PRESETSMAIOFFN AUTO SLEEPMAIN MENU ON Toggling the Auto Dim on and off will determine whether or not the LCD panel on the speaker AUTO SLEEPDIMMAIN MENU OFFON dims after a minute of not being used. METERSPRESET 1 MAIN METERSPRESETAUTO SLEEP 1 MAIONN AUTO DIM OFF AUTOMETERS DIM AUTOFFO DIM From the Main Menu, turn the Master Encoder until “Auto Dim” is highlighted. Press the Master AUTO SLEEP ON AUTO SLEEPMAIN MENU ON Encoder to access Auto Dim. Turn the Master Encoder to toggle between “On” and “Off.”Once the METERS AUTO DIM desired setting is displayed, press the master encoder to select that setting; you will be returned METERSPRESET 2 MONITOR MAIN MENU AUTO DIM to the Main Menu. Hitting the Back Button at any time will also return you to the Main Menu. AUTO DIMMAIN MENU OFF PRESET 2 MONITORAUTO DIM PRESETAUTO SLEEPMAIN MENU2 MONITOROFF Auto Sleep AUTO DIM AUTOFFO DIM Toggling the Auto Sleep on or off will determine whether or not the speaker goes into Sleep AUTOMETERSPRESET DIM 2 MONITORAUTOFFO DIM AUTO SLEEPMAIN MENU OFF Mode after a period of time. In Sleep Mode, the outputs will be completely turned off so that any AUTO SLEEPDIMMAIN MENU OFF METERSPRESET 2 MONITOR spurious outside noise such as radio signals will not be passed through the system. The speaker METERSPRESETAUTO SLEEP 2 MONITOROFF AUTO DIM OFF will come out of sleep mode as soon as audio is passed through the system again. AUTOMETERS DIM AUTOOFF SLEEP AUTO SLEEP OFF AUTO SLEEPMAIN MENU OFF From the Main Menu, turn the Master Encoder until “Auto Sleep” is highlighted. Press the Master METERS AUTO SLEEP METERSPRESET 1 AUTMAIO SLEEPN Encoder to access Auto Sleep. Turn the Master Encoder to toggle between “On” and “Off.”Once MAIN MENU the desired setting is displayed, press the master encoder to select that setting; you will be AUTO DIMMAIN MENU AUTOOFF SLEEP PRESET 1 MAIN returned to the Main Menu. Hitting the Back Button at any time will also return you to the PRESETAUTO SLEEPMAIN MENU1 MAIOFFN AUTO DIM AUTOOFF SLEEP Main Menu. AUTOMETERSPRESET DIM 1 AUTMAIOOFF SLEEPN AUTO SLEEPMAIN MENU OFF AUTO SLEEPDIMMAIN MENU OFF PRESETMETERS 1 MAIN METERSPRESETAUTO SLEEP 1 MAIOFFN AUTO DIM OFF AUTOMETERS DIM INPUT METERSOFF AUTO SLEEP OFF AUTO SLEEPinput MEters OFF 25 METERS INPUT METERS METERS input MEtersINPUT METERS CH1 input MEtersINPUT METERS CH2 input MEters CH1 INPUT METERS CH1 INPUT METERS CH2 input MEters CH2CH1 input MEters CH1CH2 CH1 NETWORK MENU 1 - IP CH2 CH2 network MENU NETWORK MENU 1 - IP IP 169.254.155.248 network NETWORK MENU MENU 1 - IP SUBNETnetwork MENU255.255.0.0 IP 169.254.155.248NETWORK MENU 1 - IP IPHIQNETnetwork169.254.155.248 MENU 1 SUBNET NETWORK255.255.0. MENU 1 0- IP SUBNETDHCPIP 169.254.155.248NETWORK255.255.0. MENUON 1 0- IP HIQNETnetwork MENU 1 HIQNETSUBNETnetwork MENU255.255.0.01 IPDHCP 169.254.155.248ON DHCPIPHIQNET 169.254.155.248ON1 SUBNET 255.255.0.0 SUBNETDHCP NETWORK255.255.0. MENU 2 - SUBNETON0 HIQNETnetwork MENU 1 HIQNET NETWORK MENU 2 - SUBNET1 DHCPIP 169.254.155.248ON DHCP networkNETWORK MENU MENU 2 - SUBNETON SUBNETnetwork MENU255.255.0.0 IP NETWORK169.254.155.248 MENU 2 - SUBNET IPHIQNETnetwork169.254.155.248 MENU 1 SUBNET NETWORK255.255.0. MENU 2 - SUBNET0 SUBNETDHCPIP NETWORK169.254.155.248255.255.0. MENU 2 - SUBNETON0 HIQNETnetwork MENU 1 HIQNETSUBNETnetwork MENU255.255.0.01 IPDHCP 169.254.155.248ON DHCPIPHIQNET 169.254.155.248ON1 SUBNET NETWORK255.255.0. MENU 3 - HIQNET0 SUBNETDHCP 255.255.0.ON0 HIQNETnetwork MENU 1 HIQNET NETWORK MENU 3 - HIQNET1 DHCPIP 169.254.155.248ON DHCP networkNETWORK MENU MENU 3 - HIQNETON SUBNETnetwork MENU255.255.0.0 IP NETWORK169.254.155.248 MENU 3 - HIQNET IPHIQNETnetwork169.254.155.248 MENU 1 SUBNET NETWORK255.255.0. MENU 3 - HIQNET0 SUBNETDHCPIP NETWORK169.254.155.248255.255.0. MENU 3 - HIQNETON0 HIQNETnetwork MENU 1 HIQNETSUBNETnetwork MENU255.255.0.01 IPDHCP 169.254.155.248ON DHCPIPHIQNET 169.254.155.248ON1 SUBNET 255.255.0.0 SUBNETDHCP NETWORK255.255.0. MENU 4 - ONDHCP0 HIQNET 1 HIQNETnetwork MENU 1 DHCP NETWORK MENU 4 - ONDHCP DHCPIP 169.254.155.248ON networkNETWORK MENU MENU 4 - DHCP SUBNETnetwork MENU255.255.0.0 IP NETWORK169.254.155.248 MENU 4 - DHCP IPHIQNETnetwork169.254.155.248 MENU 1 SUBNET NETWORK255.255.0. MENU 4 - DHCP0 SUBNETDHCPIP NETWORK169.254.155.248255.255.0. MENU 4 - ONDHCP0 HIQNETnetwork MENU 1 HIQNETSUBNETnetwork MENU255.255.0.01 IPDHCP 169.254.155.248ON DHCPIPHIQNET 169.254.155.248ON1 SUBNET 255.255.0.0 SUBNETDHCP 255.255.0.ON0 HIQNET INFORMATION1 HIQNET INFORMATION 1 DHCP INFORMAONTION DHCPMODEL JBL SRX815PON INFORMATION INFORMATION VERSIONINFORMATION 0.0.3.4 MODEL JBL SRX815PINFORMATION MODELMAC INFORMATION00:0A:40:10:05:C5JBL SRX815P VERSION INFORMA0.0.3.TION4 VERSIONMODEL JBL SRX815PINFORMA0.0.3.TION4 MAC INFORMATION00:0A:40:10:05:C5 MACVERSIONINFORMATION00:0A:40:10:05:C50.0.3.4 MODEL JBL SRX815P MODELMAC 00:0A:40:10:05:C5JBL SRX815P VERSION 0.0.3.4 VERSION 0.0.3.4 MAC 00:0A:40:10:05:C5 MAC 00:0A:40:10:05:C5 IP address subnet HiQnetIP address address subnetDHCP HiQnetinformationIP address address IPsubnet DHCPaddress HiQnet address informationIPsubnet address HiQnetDHCP address informationsubnet HiQnetIP DHCPaddress address informationsubnetDHCP HiQnetinformation address DHCP information
INTRO JBL SRX815P INTRO JBL SRX815P 0.0 INTRO JBL SRX815P INTRO MAIN 0.0 JBL SRX815P INTRO 0.0 JBLMAIN SRX815P 0.0INTRO JBLMAIN SRX815P INPUT0.0 SCREEN channelMAIN 1 INPUT SCREEN MAIN 0.0 channel 1 0.0 INPUT SCREEN MAIN channel 1 INPUT SCREEN sensitivitY line 0.0 channel 1 INPUT SCREEN 0.0 channelsensitivitY 1 line INPUT0.0 SCREEN MAIN MENU channelsensitivitY 1 line MAIN MENU 0.0 sensitivitY line PRESET 1 0.0MAIN MAI MENUN sensitivitYAUTO DIMMAIN line MENU OFF MAIN MENU AUTOPRESET SLEEP 1 MAIONN sensitivitYMAIN line MENU METERSAUTO DIM MAINOFF MENU PRESET MAIN MENU1 MAIN AUTO SLEEP MAIN MENUON AUTO DIM OFF METERSPRESET MAIN MENU1 MAIN AUTO SLEEP ON PRESETAUTO DIM 1 MAIN MAIOFF MENUN METERS PRESETS AUTO DISLEEPMMAIN MENU OFFON MAIN MENU AUTOPRESETMETERS SLEEP 1 MAIONN PRESET 1 MAIPRESETSN METERSAUTO DIM OFF AUTO DIMMAIN MENU OFF AUTO SLEEP PRESETSON AUTOPRESET SLEEP 1 MAIONN METERS MAIN MENU METERSAUTO DIM PRESETSOFF PRESET MAIN MENU1 MAIN AUTO SLEEP PRESETSON AUTO DIM OFF METERSPRESET MAIN MENU1 MAIN AUTO DISLEEPM PRESETSOFFON PRESET 1 AUTMAIO NDIM AUTOMETERS SLEEPMAIN MENU ON AUTO DIMMAIN MENU OFF PRESETMETERS 1 MAIN AUTOPRESET SLEEP 2 MONITORAUTONO DIM AUTO DIM OFF METERSAUTO DIMMAIN MENU OFF AUTO SLEEP AUTONO DIM AUTOPRESET SLEEP 2 MONITOROFF METERS MAIN MENU METERSAUTO DIM AUTOFFO DIM PRESET MAIN MENU2 MONITOR AUTO SLEEP AUTOFFO DIM AUTO DIM OFF METERSPRESET MAIN MENU2 MONITOR AUTO DISLEEPM OFF PRESET 2 MONITORAUTAUTO SLEEPO DIM METERS AUTO DISLEEPMMAIN MENU OFF METERS PRESETAUTO SLEEP 21 MONITORAUTMAIOOFF SLEEPN AUTOMETERS DIMMAIN MENU OFF AUTO SLEEP AUTOPRESET SLEEP 1 MAIOFFN MAIN MENU METERSAUTO DIM AUTOOFF SLEEP PRESET MAIN MENU1 MAIN AUTO SLEEP AUTOOFF SLEEP AUTO DIM OFF METERSPRESET MAIN MENU1 MAIN AUTO DISLEEPM AUTOOFF SLEEP PRESET 1 INPUTMAI METERSN METERS AUTO DISLEEPinputMMAIN MEtersMENU OFF METERS AUTOPRESET SLEEP 1 INPUTMAI METERSOFFN CH1METERSAUTO DIinputM MEters OFF AUTO SLEEP INPUT METERSOFF CH2 BacMETERSCH1k painputne MEtersl LINPUTCD METERS input MEters INPUT METERS CH2CH1 input MEters CH1 CH2 INPUT METERS Meters NETWORK MENU 1 - IP CH2CH1 input MEters From the Main Menu, turn the Master Encoder until “Meters” is highlighted. Press the network MENU Master Encoder to access Meters. Input Meters for both channels will be displayed. Press CH2 CH1IP 169.254.155.248NETWORK MENU 1 - IP the Back Button to return to the Main Menu or wait one minute to be returned to the SUBNETnetwork MENU255.255.0.0 Home Screen. CH2 NETWORK MENU 1 - IP HIQNETIP 169.254.155.2481 network MENU DHCPSUBNET NETWORK255.255.0. MENUON 1 0- IP Network Menu IP network169.254.155.248 MENU From the Main Menu, turn the Master Encoder until “Network Menu” is highlighted. Press HIQNET NETWORK MENU 1 -1 IP IPSUBNET 169.254.155.248255.255.0.0 the Master Encoder to access the Network Menu. DHCP network MENU ON Adjustments to the systems IP address, Subnet Address, and HiQNet Address can be HIQNET 1 SUBNETIP NETWORK169.254.155.248NETWORK255.255.0. MENU MENU2 - SUBNET 1 0- IP made from the Network Menu. Please note that “DHCP” must be set to “Off,” in order to DHCP ON HIQNETSUBNETnetwork MENU255.255.0.01 manually adjust the IP or Subnet addresses. IPDHCPHIQNET NETWORK169.254.155.248 MENU 2 - SUBNETON1 1. IP. SUBNETDHCP network MENU255.255.0.ON0 NETWORK MENU 2 - SUBNET In the Network Menu, turn the Master Encoder until “IP” is highlighted. Press the HIQNETIP 169.254.155.2481 networkNETWORK MENU MENU 2 - SUBNET Master Encoder to access the IP address. Turn the Master Encoder to adjust each DHCPSUBNET 255.255.0.ON0 digit string of the IP address. Once a digit string is set to its desired value, press the IP network169.254.155.248 MENU HIQNET NETWORK MENU 2 - SUBNET1 Master Encoder to move to the next string. Once the entire IP address is set, press SUBNET 255.255.0.0 IPDHCP network169.254.155.248 MENU ON the Master Encoder to save changes. Pressing the Back Button at any time will HIQNET 1 IPSUBNET NETWORKNETWORK169.254.155.248255.255.0. MENU MENU 2 3 - - SUBNET HIQNET0 cancel changes and return you to the Network Menu. DHCP ON SUBNETHIQNETnetwork MENU255.255.0.01 DHCPIP NETWORK169.254.155.248 MENU 3 - HIQNETON 2. SUBNET. HIQNET 1 In the Network Menu, turn the Master Encoder until “SUBNET” is highlighted. Press SUBNETnetwork MENU255.255.0.0 DHCP NETWORK MENU 3 - HIQNETON the Master Encoder to access the SUBNET address. Turn the Master Encoder to HIQNETIP 169.254.155.2481 adjust each digit string of the SUBNET address. Once a digit string is set to its networkNETWORK MENU MENU 3 - HIQNET DHCPSUBNET 255.255.0.ON0 desired value, press the Master Encoder to move to the next string . Once the entire IP network169.254.155.248 MENU HIQNET NETWORK MENU 3 - HIQNET1 SUBNET address is set, press the Master Encoder to save changes. Pressing the SUBNET 255.255.0.0 IPDHCP network169.254.155.248 MENU ON Back Button at any time will cancel changes and return you to the Network Menu. SUBNETHIQNET NETWORK255.255.0. MENU 3 - HIQNET01 IP NETWORK169.254.155.248 MENU 4 - DHCP HIQNETDHCP network MENU ON1 3. HiQNet SUBNETnetwork MENU255.255.0.0 In the Network Menu, turn the Master Encoder until “HiQNet” is highlighted. Press DHCPIP 169.254.155.248ON HIQNETIP NETWORK169.254.155.248 MENU 4 - DHCP1 the master encoder to access the HiQNet address. Turn the Master Encoder to scroll SUBNET 255.255.0.0 DHCPSUBNETnetwork MENU255.255.0.ON0 to the desired HiQNet address. Once the desired HiQNet address is displayed, press HIQNET NETWORK MENU 4 - DHCP1 IPHIQNET 169.254.155.2481 the Master Encoder to select that address and return to the Network Menu. DHCP networkNETWORK MENU MENU 4 - ONDHCP SUBNETDHCP 255.255.0.ON0 IP network169.254.155.248 MENU 4. DHCP HIQNET NETWORK MENU 4 - DHCP1 In the Network Menu, turn the Master Encoder until “DHCP” is highlighted. Press the SUBNETIP 169.254.155.248255.255.0.0 DHCP network MENU ON Master Encoder to access DHCP. Turn the Master Encoder to toggle between “On” HIQNET 1 SUBNETIP NETWORK169.254.155.248255.255.0. MENU 4 - DHCP0 and “Off.”Once the desired setting is displayed, press the master encoder to select DHCP INFORMAONTION HIQNETSUBNETnetwork MENU255.255.0.01 that setting; you will be returned to the Network Menu. Hitting the Back Button at any INFORMATION time will also return you to the Network Menu. NOTE: “DHCP” must be set to “Off,” DHCPHIQNETIP 169.254.155.248ON1 MODEL JBL SRX815PINFORMATION in order to manually adjust the IP or Subnet addresses. DHCPSUBNET 255.255.0.ON0 VERSIONINFORMATION 0.0.3.4 HIQNET INFORMATION1 MACMODEL 00:0A:40:10:05:C5JBL SRX815P Information DHCP INFORMATION ON From the Main Menu, turn the Master Encoder until “Information” is highlighted. Press VERSION INFORMA0.0.3.TION4 MODEL INFORMATIONJBL SRX815P the Master Encoder to access Information. The Model Number of the system, software MAC 00:0A:40:10:05:C5INFORMATION version, and MAC address are displayed in this screen. Press the Back Button to return to VERSIONMODEL JBL SRX815P0.0.3.4 INFORMATION the Main Menu. MAC 00:0A:40:10:05:C5 VERSIONMODEL JBL SRX815PINFORMA0.0.3.TION4 MACVERSIONINFORMATION00:0A:40:10:05:C50.0.3.4 MACMODEL 00:0A:40:10:05:C5JBL SRX815P VERSION 0.0.3.4 MAC 00:0A:40:10:05:C5
26 SRX Presets
Main 60Hz Sub, 80Hz Sub, 100Hz Sub, 120Hz Sub This is the standard tuning for SRX812P, SRX815P, and These are the tunings to use with the SRX812P, SRX815P, SRX835P for use without a subwoofer. and SRX835P when they are used with a subwoofer other than SRX818SP or SRX828SP. Depending on the range and Monitor specifications of the subwoofer, different crossover points are Monitor tuning can be used for both SRX812P and SRX815P provided to make an ideal match. when they are deployed in the monitor position. 60Hz , 80Hz , 100Hz , 120Hz Speech These are the tunings to use with the SRX818SP and This is an ideal preset for speech intelligibility on the SRX812P, SRX828SP when they are used with full range systems other SRX815P, and SRX835P than the SRX812P, SRX815P, and SRX835P. Depending on the range and specifications of the full range speakers, different SRX Sub crossover points are provided to make an ideal match. This is the preset to use in the SRX812P, SRX815P, and SRX835P when they are used with either the SRX818SP or the Cardioid 60, Cardioid 80 SRX828SP. This preset matches the performance of the SRX These tunings are to be used in the rear-facing subwoofers full range systems to the SRX subwoofers precisely, making for only in cardioid systems. Select the desired frequency for the an ideal subwoofer/satellite system. crossover based on what the tunings used in the front-facing subwoofers. Use Cardioid 80 if the other subwoofers are set to SRX Top. SRX Top This is the preset to use in the SRX818SP and SRX828SP when they are used with the SRX812P, SRX815P, or SRX835P. This preset matches the performance of the SRX full range systems to the SRX subwoofers precisely, making for an ideal subwoofer/ satellite system.
27 SRX Presets
Preset Crossovers Presets are included to use SRX with a variety of different full range speakers and subwoofers. This chart details which presets to use in which systems to achieve optimal performance.
SRX 812/815 SRX 835 Generic Top Box Generic Top Box Generic Top Box Generic Top Box 60Hz Sub Crossover 80Hz Sub Crossover 100Hz Sub Crossover 120Hz Sub Crossover
SRX Sub SRX Sub 60Hz HiPass 80Hz HiPass 100Hz HiPass 120Hz HiPass Normal SRX Top SRX Top 60Hz 80Hz 100Hz 120Hz SRX Sub SRX Sub 80Hz HiPass SRX 818 Cardioid 80Hz Cardioid 80Hz* Cardioid 80Hz* Cardioid 80Hz* 60Hz Sub 60Hz HiPass Cardioid 60Hz Cardioid 60Hz* Cardioid 60Hz* SRX Sub SRX Sub 60Hz HiPass 80Hz HiPass 100Hz HiPass 120Hz HiPass Normal SRX Top SRX Top 60Hz 80Hz 100Hz 120Hz SRX Sub SRX Sub 80Hz HiPass SRX 828 Cardioid 80Hz Cardioid 80Hz* Cardioid 80Hz* Cardioid 80Hz* 60Hz Sub 60Hz HiPass Cardioid 60Hz Cardioid 60Hz* Cardioid 60Hz* 60Hz Sub 60Hz 60Hz LoPass 80Hz Sub 80Hz Sub 80Hz Generic 80Hz LoPass 80Hz LoPass Subs 100Hz Sub 100Hz Sub 100Hz 100Hz LoPass 100Hz LoPass 120Hz Sub 120Hz Sub 120Hz 120Hz LoPass 120Hz LoPass
*The Cardioid Preset is always selected only on the rear-facing box. The two front facing boxes should be set to your selected crossover frequency, eg. 60Hz or 80Hz.
28 Premium DSP Technology
Introduction The onboard suite of user controllable DSP featured in SRX800 allows users to set up and fine tune their systems with an extremely high degree of ease and precision. In addition to the JBL engineered application presets, users can define and recall their own presets for use in a variety of settings and applications. DSP V5 Compatible JBL Tunings • 96kHz FIR Filters • LevelMax™ Limiting
Full Suite of User Controllable DSP • 20 PEQs with a full suite of filters • 2 sec of delay • Signal Generator: Pink Noise, White Noise, and Sine Waves • Input mixing • Amplifier Monitoring: Input Voltage, Thermal Errors, Clip • 50 User Presets Controller SRX Connect App Basic control over the system is provided through the SRX Control App, available for iOS, and android devices. Typical setups are easily achieved and controlled via this app.
Audio Architect For more advanced configurations, users can control the system using Audio Architect. Audio Architect provides incredible flexibility with the same components scaling from an 80,000 seat stadium down to a small performing arts center. Here it seamlessly continues Networking to act as the vehicle for artistic expression by delivering the highest quality sound reproduction and enabling the artists to convey a dazzling performance. Whether a theater of 200 or 2,000, the HARMAN solution raises the roof.
29 Networking
SRX800 Speakers feature an Ethernet connector so that they can be controlled via Audio Architect (version 1.60 or later) or SRX Connect. The latest versions of both of these programs can be found at http://www.jblpro.com/www/products/portable-market/ srx800-series.
When a connection is established, the LINK LED on the back panel of the speaker will illuminate. The DATA LED will also light to indicate that the speaker is sending and receiving information via the network.
There are several options for connecting the speakers to a network:
1. Direct Connection Simply plug an Ethernet cable into both the SRX speaker and your computer. You can now control this individual speaker.
2. Wired connection Connect any number of SRX speakers to a wired network router, either directly or via a switcher, and connect your computer to that same network. You can now control all speakers on the network.
3. Wireless connection Connect any number of SRX speakers to a wireless router either directly or via a switcher, and connect your computer or tablet to that same network. You can now control all speakers on the network. Wireless connection is the only option for tablet control via the SRX Connect app for iPad and Android tablets.
30 Networking
SRX800 Speakers can be used in Audio Architect version 1.60 and later. Audio Architect can be used to control all DSP parameters of SRX800. Some functions, such as building and saving DSP presets in the speakers themselves, are only available through Audio Architect. To download Audio Architect, visit http://www.jblpro.com/www/products/portable-market/srx800-series and select the latest version of Audio Architect.
See the networking section above for instructions on connecting speakers to a network. Some users will not see every speaker on the network the first time they connect new speakers. The most probable cause for this is that two or more speakers are automatically set to the same HiQnet address when they are brand new. Each speaker must have its own unique HiQnet address in order for the system to recognize them. If you aren’t seeing connected speakers on your network, you can use HiQnet NetSetter to reset the HiQnet addresses of speakers on the system. NetSetter can be downloaded at http://www.jblpro.com/www/products/portable-market/srx800-series.
Once your speakers are networked, they will show up in Drag speakers from the left hand panel into the room to start the left hand panel on audio architect. A full list of Audio working with them. Architect compatible Harman devices is also available for creating shows while offline.
Double-click the speaker to bring up its control panel. Double-click any of the DSP parameters to adjust those.
More in-depth instructions on using SRX with Audio Architect can be found at http://www.jblpro.com/www/products/portable- market/srx800-series
31 Smart Device App
Introduction For ease of use, SRX800 can be controlled via a proprietary app, SRX Connect, which is available for Android and iOS devices. It may be found at http://www.jblpro.com/www/products/portable-market/srx800-series. Once the speakers are online and connected to the network, connect your device to that same network and the app will find the speakers.
Drag and Drop speakers from the network into their configuration to get started.
Levels can be set directly from the configuration screen. Selecting a group of speakers will allow users to adjust control DSP and tune the system.
A full user’s guide for the app can be found online at http://www.jblpro.com/www/products/portable-market/srx800-series/app
32 Loudspeaker Placement and Suspension
MAIN MENU PRESET ? FILTERS AUTO DIM ON AUTO SLEEP OFF POWER METERS
MASTER LEVEL
BACK IN OUT
MAIN MENU CH 1 PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS MAIN MENU AUTO SLEEP OFF MAIN MENU AUTO DIM ON PRESET ? FILTERS MAIN MENU POWER METERS PRESET ? FILTERS PRESET ? FILTERS AUTO SLEEP OFF AUTO DIM ON AUTO DIM ON POWER AUTO DIM ON MASTER LEVEL METERS AUTO SLEEP OFF AUTO SLEEP OFF AUTO SLEEP OFF POWER METERS POWER METERS MASTER LEVEL CH2 POWER METERS BACK MASTER LEVEL MASTER LEVEL MASTER LEVEL IN OUT BACK NETWORK IN OUT BACK IN OUT BACK IN OUT BACK IN OUT IN OUT CH 1 CH 1 CH 1 CH 1 CH 1
LINK
CH2 DATA CH2 CH2 NETWORK SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA IN OUT CH2 CH2 NETWORK A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA IN OUT MADE IN MEXICO NETWORK NETWORK IN OUT NETWORK IN OUT IN OUT
LINK LINK DATA LINK LINK DATA LINK DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA DATA DATA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO
Suspended
MAIN MENU PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS AUTO SLEEP OFF AUTO DIM ON POWER METERS AUTO SLEEP OFF POWER METERS
MASTER LEVEL POWE MASTER LEVEL R BACK CH IN OUT BACK CH IN OUT SERIAL NO 2 1 A HARMAN .J METERS AU AU PRESET
MAIN MENU CH 1 INTERN TO TO IN MAIN MENU CH 1 IN
PRESET ? FILTERS AT SLEEP DI
MAIN MENU IONA PRESET ? FILTERS
AUTO DIM ON MAIN MENU MAIN MENU L
PRESET ? FILTERS M MAIN MENU COMP AUTO SLEEP OFF AUTO DIM ON PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS MAIN MENU AN MAIN MENU POWER AUTO SLEEP OFF MAIN MENU Y MAIN MENU METERS PRESET ? FILTERS AUTO SLEEP OFF AUTO DIM ON PRESET ? FILTERS BL PROFESSIONAL NORTHRIDGE, CA US A PRESET ? FILTERS
POWER METERS PRESET ? FILTERS AUTO DIM ON DESIGNED AND ENGINEERED IN THE US PRESET ? FILTERS AUTO DIM ON POWER AUTO SLEEP OFF AUTO DIM ON AUTO DIM ON METERS ? FI
POWE AUTO SLEEP OFF MASTER LEVEL AUTO DIM ON POWER METERS AUTO DIM ON
AUTO SLEEP OFF OU T OU T AUTO SLEEP OFF MASTER LEVEL POWER METERS AUTO SLEEP OFF POWE AUTO SLEEP OFF MADE IN MEXICO AUTO SLEEP OFF POWER METERS MASTER LEVEL CH2 POWER METERS LT POWER METERS R MASTER LEVEL POWER ER S POWER METERS CH2 OF F METERS POWE BACK MASTER LEVEL ON POWE POWE MASTER LEVEL R MASTER LEVEL MASTER LEVEL CH BACK CH IN OUT BACK MASTER LEVEL MASTER LEVEL
IN OUT A R SERIAL NO NETWORK CH 2 IN OUT BACK CH NETWOR 1 R IN OUT R A BACK NETWORK HARMAN IN OUT IN OUT SERIAL NO CH MASTER LEVE 2 BACK BACK CH BACK .J IN OUT 1 METERS AU AU PRESET A DATA CH CH BACK CH BACK CH LIN IN OUT HARMAN IN OUT IN OUT
SERIAL NO INTERN
CH 2
1 .J TO TO IN OUT BACK IN OUT 1 SERIAL NO SERIAL NO METERS AU AU PRESET A IN IN 2 2
CH K
1 HARMAN 1 1 AT
A A INTERN CH SLEEP DI HARMAN HARMAN IONA 1 .J TO TO METERS AU AU PRESET IN CH IN MAIN MENU .J 1 .J L K AT
M METERS AU AU PRESET METERS AU AU PRESET COMP INTERN SLEEP DI CH
IONA 1 TO TO
IN IN CH INTERN CH INTERN CH L 1 MAIN MENU 1
AN 1 TO TO TO TO L AT M IN IN IN IN COMP SLEEP DI CH Y CH
1 IONA 1 BL PROFESSIONAL NORTHRIDGE, CA US A AT AT SLEEP DI SLEEP DI
MAIN MENU IONA IONA DESIGNED AND ENGINEERED IN THE US AN L M COMP Y MAIN MENU MAIN MENU L L BL PROFESSIONAL NORTHRIDGE, CA US A ? FI
M LINK M COMP COMP
DESIGNED AND ENGINEERED IN THE US LINK AN Y OU T OU T AN AN BL PROFESSIONAL NORTHRIDGE, CA US A ? FI MADE IN MEXICO Y Y LT
DESIGNED AND ENGINEERED IN THE US
CH2 BL PROFESSIONAL NORTHRIDGE, CA US A DATA BL PROFESSIONAL NORTHRIDGE, CA US A OU T OU T
DESIGNED AND ENGINEERED IN THE US DESIGNED AND ENGINEERED IN THE US ER S
OF F DATA CH2 ? FI ON MADE IN MEXICO LT
CH2 ? FI ? FI OU T OU T ER S CH2 OF F ON MADE IN MEXICO OU T OU T OU T OU T CH2 LT A MADE IN MEXICO MADE IN MEXICO
LT SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA LT
NETWORK ER S CH2 CH2 OF F CH2 ON IN OUT NETWORK NETWOR SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA ER S ER S CH2 OF F A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA CH2 OF F A NETWORK IN OUT ON A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA ON MASTER LEVE
IN OUT NETWORK NETWOR MADE IN MEXICO DATA LIN IN OUT NETWORK MADE IN MEXICO A MASTER LEVE BACK A A IN OUT NETWORK NETWOR NETWORK DATA NETWORK K LIN IN OUT NETWORK NETWOR IN OUT IN OUT NETWORK NETWOR MASTER LEVE
IN OUT BACK IN OUT DATA MASTER LEVE MASTER LEVE K LIN K DATA DATA LIN LIN BACK K L BACK BACK K K K L K
LINK K K
LINK L LINK L L DATA LINK DATA LINK LINK DATA LINK LINK LINK DATA LINK DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA DATA DATA DATA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO
Floor Standing Monitor Tripod Stand Pole Mount Subs with 3-way splayed
-- Standing (SRX812P, SRX815P, SRX835P) -- Standing (SRX812P, SRX815P, SRX835P) -- Standing (SRX812P, SRX815P, SRX835P) -- Standing (SRX812P, SRX815P, SRX835P) -- Standing (SRX812P--, SRX815P Monitor, (SRX812PSRX835P), SRX815P) -- Standing (SRX812P, SRX815P, SRX835P) -- Monitor (SRX812P, SRX815P) -- Monitor (SRX812P, SRX815P) -- Monitor (SRX812P, SRX815P) -- Monitor (SRX812P, --SRX815P) Pole Mounted (SRX12P, SRX815P, SRX835P) -- Monitor (SRX812P, SRX815P) -- --P olePole Mounted Mounted (SRX12P (SRX12P, SRX815P, SRX815P, SRX835P), SRX835P) -- Pole Mounted (SRX12P, SRX815P, SRX835P) -- Pole Mounted (SRX12P, SRX815P, SRX835P) -- Pole Mounted (SRX12P, SRX815P, SRX835P)
MAIN MENU MAIN MENU MAIN MENU PRESET ? FILTERS PRESET ? FILTERS PRESET ? FILTERS AUTO DIM ON AUTO DIM ON AUTO DIM ON -- Sub Mounted (SRX812P, SRX815P, SRX835P) MAIN MENU MAIN MENU AUTO SLEEP OFF AUTO SLEEP OFF AUTO SLEEP OFF PRESET ? FILTERS PRESET ? FILTERS POWER METERS POWER POWER AUTO DIM ON METERS AUTO DIM ON METERS MASTER LEVEL AUTO SLEEP OFF MASTER LEVEL AUTO SLEEP OFF MASTER LEVEL POWER METERS POWER METERS
MASTER LEVEL MASTER LEVEL BACK BACK IN BACKOUT IN OUT IN OUT BACK BACK IN OUT IN OUT CH 1 CH 1 CH 1
-- SubCH Mounted (SRX812P, SRX815PCH , SRX835P) -- Sub1 Mounted (SRX812P, SRX815P1 , SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P) CH2 CH2 CH2
CH2 CH2 NETWORK NETWORK IN NETWOROUK T IN OUT IN OUT NETWORK NETWORK -- Suspended (SRX812P, SRX815P, SRX835P) IN OUT IN OUT
LINK LINK LINK DATA DATA DATA LINK LINK
DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONALA HA NORTHRIDGE,RMAN INTERN CAAT IO USNAAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO -- SuspendedSERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA (SRX812P, SRX815PSERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA , SRX835P) A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA -- Suspended (SRX812P, SRX815P, SRX835P) -- SuspendedMADE IN MEXICO (SRX812P, SRX815PMADE IN MEXICO , SRX835P) -- Suspended (SRX812P-- Stacked, SRX815P Subs, SRX835P) (SRX818SP, SRX828SP) -- Suspended (SRX812P, SRX815P, SRX835P) -- Stacked Subs (SRX818SP, SRX828SP) -- Stacked Subs (SRX818SP, SRX828SP) -- Stacked Subs (SRX818SP, SRX828SP) -- Stacked Subs (SRX818SP-- Cardiod, SRX828SP) Subs (SRX818SP, SRX828SP) -- Stacked Subs (SRX818SP, SRX828SP) -- --Cardiod Cardiod Subs Subs (SRX818SP (SRX818SP, SRX828SP), SRX828SP) -- Cardiod Subs (SRX818SP, SRX828SP) -- Cardiod Subs (SRX818SP, SRX828SP) -- Cardiod Subs (SRX818SP, SRX828SP)
MAIN MENU MAIN MENU MAIN MENU PRESET ? FILTERS MAIN MENU PRESET ? FILTERS PRESET ? FILTERS MAIN MENU MAIN MENU PRESET ? FILTERS AUTO DIM ON PRESET ? FILTERS PRESET ? FILTERS AUTO DIM ON AUTO DIM ON AUTO DIM ON MAIN MENU MAIN MENU AUTO SLEEP OFF AUTO SLEEP OFF AUTO SLEEP OFF AUTO DIM ON AUTO DIM ON PRESET ? FILTERS PRESET ? FILTERS POWER METERS MAIN MENU MAIN MENU MAIN MENU AUTO SLEEP OFF POWER POWER AUTO SLEEP OFF AUTO SLEEP OFF METERS METERS PRESET ? FILTERS PRESET ? FILTERS PRESET ? FILTERS POWER METERS AUTO DIM ON AUTO DIM ON POWER METERS POWER METERS AUTO SLEEP OFF AUTO SLEEP OFF MASTER LEVEL AUTO DIM ON AUTO DIM ON AUTO DIM ON POWE MASTER LEVEL MASTER LEVEL MASTER LEVEL POWE POWE POWER METERS POWER METERS AUTO SLEEP OFF MASTER LEVEL AUTO SLEEP OFF AUTO SLEEP OFF MASTER LEVEL
POWER POWER R METERS METERS POWER METERS BACK R R MASTER LEVEL MASTER LEVEL POWE POWE CH BACK IN BACKOUT MASTER LEVEL MASTER LEVEL BACK CH
MASTER LEVEL CH CH IN OUT IN OUT BACK IN BACKOUT CH CH SERIAL NO 2
IN OUT IN OUT R R 1 SERIAL NO SERIAL NO A 2 2 HARMAN 1 1
BACK BACK A A .J HARMAN HARMAN AU PRESET METERS AU CH CH BACK BACK CH CH
IN OUT IN OUT BACK .J .J
AU PRESET AU PRESET METERS AU METERS AU CH 1 IN OUT IN OUT INTERN TO TO
IN OUT SERIAL NO SERIAL NO
IN IN INTERN INTERN CH 1 CH 1 CH 1 2 2 TO TO TO TO 1 1 A A AT IN IN IN IN DI SLEEP CH CH HARMAN HARMAN
1 1 IONA AT AT DI DI SLEEP SLEEP .J .J MAIN MENU IONA IONA L AU PRESET AU PRESET METERS AU METERS AU M COMP MAIN MENU MAIN MENU L L
INTERN INTERN M M CH 1 CH 1 COMP COMP TO TO TO TO AN IN IN CH CH IN IN 1 1 Y
CH AN AN
1 AT AT BL PROFESSIONAL NORTHRIDGE, CA US A DI DI SLEEP SLEEP Y Y IONA IONA
DESIGNED AND ENGINEERED IN THE US BL PROFESSIONAL NORTHRIDGE, CA US A BL PROFESSIONAL NORTHRIDGE, CA US A MAIN MENU MAIN MENU
DESIGNED AND ENGINEERED IN THE US DESIGNED AND ENGINEERED IN THE US L L M M ? FI COMP COMP ? FI ? FI OU T OU T AN AN Y Y MADE IN MEXICO OU T OU T OU T OU T LT CH2 BL PROFESSIONAL NORTHRIDGE, CA US A BL PROFESSIONAL NORTHRIDGE, CA US A
MADE IN MEXICO MADE IN MEXICO DESIGNED AND ENGINEERED IN THE US DESIGNED AND ENGINEERED IN THE US LT LT ER S CH2 CH2 CH2 OF F ON ? FI ? FI ER S ER S CH2 CH2 OF F OF F ON ON OU T OU T OU T OU T MADE IN MEXICO MADE IN MEXICO A CH2 CH2 NETWORK LT LT A A IN OUT NETWOR ER S ER S NETWORK NETWORK CH2 CH2 NETWORK OF F OF F
CH2 ON ON IN OUT IN OUT NETWORK IN NETWORKOUT NETWOR NETWOR IN OUT IN OUT MASTER LEVE DATA MASTER LEVE MASTER LEVE LIN DATA DATA LIN LIN A A NETWORK NETWORK BACK K NETWOR NETWOR IN OUT IN OUT NETWORK NETWORK BACK BACK
IN OUT IN OUT NETWORK K K
IN OUT MASTER LEVE MASTER LEVE K DATA DATA LIN LIN K K L BACK BACK K K L L
LINK K K LINK LINK LINK LINK LINK L L DATA DATA DATA DATA LINK LINK DATA DATA LINK LINK LINK DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONALA HA NORTHRIDGE,RMAN INTERN CAAT IO USNAAL COMPANY DESIGNED AND ENGINEERED IN THE USA DATA DATA DATA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONALA HA NORTHRIDGE,RMAN INTERN CAAT IO USANAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA MADE IN MEXICO MADE IN MEXICO SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO MADE IN MEXICO MADE IN MEXICO
Stacked Subs Cardiod Subs Cardiod Subs Vertical
MAIN MENU PRESET ? FILTERS MAIN MENU AUTO DIM ON PRESET ? FILTERS AUTO SLEEP OFF AUTO DIM ON POWER METERS AUTO SLEEP OFF POWER METERS
MASTER LEVEL POWE MASTER LEVEL R BACK CH IN OUT BACK CH IN OUT SERIAL NO 2 1 A HARMAN .J AU PRESET METERS AU
CH 1 INTERN TO TO IN CH 1 IN AT DI SLEEP IONA MAIN MENU L M COMP AN Y BL PROFESSIONAL NORTHRIDGE, CA US A
DESIGNED AND ENGINEERED IN THE US ? FI OU T OU T MADE IN MEXICO CH2 LT ER S CH2 OF F ON
NETWORK A
IN OUT NETWORK NETWOR IN OUT MASTER LEVE DATA LIN BACK K K L
LINK LINK DATA DATA
SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SERIAL NO.JBL PROFESSIONAL NORTHRIDGE, CA USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA MADE IN MEXICO -- Standing-- Standing (SRX812P (SRX812P, SRX815P-- Standing, SRX815P---- Standing, StandingSRX835P) (SRX812P, SRX835P) (SRX812P (SRX812P, SRX815P, SRX815P, SRX815P, SRX835P), SRX835P), SRX835P) MADE IN MEXICO The following guidelines-- Monitor-- Monitor will (SRX812P (SRX812Phelp, SRX815P)-- Monitoryou, SRX815P)---- Monitor Monitor achieve (SRX812P (SRX812P (SRX812P, SRX815P) optimum, SRX815P), SRX815P) sound wherever you use your SRX800 loudspeakers. Only experienced professionals -- Pole-- Mounted Pole Mounted (SRX12P (SRX12P-- ,P SRX815Pole---- MountedP, PoleSRX815Pole, MountedSRX835P) Mounted (SRX12P, SRX835P) (SRX12P (SRX12P, SRX815P, SRX815P, SRX815P, SRX835P), SRX835P), SRX835P) should attempt to suspend-- Sub --Mounted Sub Mounted the (SRX812P speakers. (SRX812P-- Sub, SRX815P-- --Mounted Sub Sub, SRX815P Mounted, MountedSRX835P) For(SRX812P, SRX835P) (SRX812P (SRX812Ppermanent, SRX815P, SRX815P, SRX815P, SRX835P), SRX835P), SRX835P)installation applications utilizing the M10 suspension points, JBL Professional -- Suspended-- Suspended (SRX812P (SRX812P--, SRX815P Suspended--,-- SRX815PSuspended Suspended, SRX835P) (SRX812P, SRX835P) (SRX812P (SRX812P, SRX815P, SRX815P, SRX815P, SRX835P), SRX835P), SRX835P) recommends the use-- Stacked of-- StackedM10 Subs (SRX818SP Subs x 1.5(SRX818SP-- Stacked, SRX828SP) --thread-- Stacked Stacked, SRX828SP)Subs Subs(SRX818SP Subs pitch (SRX818SP (SRX818SP, SRX828SP)forged, SRX828SP), SRX828SP) shoulder steel eyebolts with an 18-20mm threaded shaft, along with fender washers, rated for overhead suspension.-- Cardiod-- Cardiod SubsUsers (SRX818SP Subs (SRX818SP-- unfamiliarCardiod, SRX828SP)---- Cardiod Cardiod, SRX828SP)Subs Subs(SRX818SP Subs (SRX818SP (SRX818SP with, SRX828SP), SRX828SP), SRX828SP) safe rigging practices should not attempt to suspend loudspeakers. Please -- Standing (SRX812P, SRX815P, SRX835P) see https://www.jblpro.com/pub/technote/tn_v1n14.pdf for more information.-- Monitor (SRX812P, SRX815P) -- Pole Mounted (SRX12P, SRX815P, SRX835P) -- Sub Mounted (SRX812P, SRX815P, SRX835P) -- Suspended (SRX812P, SRX815P, SRX835P) -- Stacked Subs (SRX818SP, SRX828SP) Aim the speakers to cover the whole audience -- Cardiod Subs (SRX818SP, SRX828SP) For best results try to get the high frequency horn at least 2 to 4 feet above the heads of the audience. If the speakers are too low, the people in the back of the audience will not receive the best quality sound. If the speakers are too high, people in the front of the audience will not receive the best quality sound. Pay attention to the coverage pattern of each speaker and aim them so that the entire audience is within the coverage pattern of the system. Utilize the downward angle pole cup on the SRX812P and SRX815P for closer audiences in smaller spaces.
Place the speakers between the microphones and the audience. Feedback occurs when the microphones pick up sound from the speakers and “feed” the sound back through the sound system. If space is limited, point the speakers away from the microphones to reduce feedback.
Locate the speakers away from turntables. Low-frequency feedback occurs when the output of the speaker is picked up by the tone arm of the turntable and is re-amplified. A heavy, solid turntable base and shock mounting can also reduce this type of feedback in DJ applications.
Use more speakers in large or highly reverberant spaces. Spreading speakers throughout these spaces will produce much better sound than trying to compensate with loudness level or equalization. For very long distances, the use of another set of speakers with time delay is recommended.
Stand speakers upright for PA - Lay speakers on their side for stage monitoring. Use the full range speakers in upright stance for even coverage over a wide area. SRX815P and SRX812P speakers are also designed with a slanted position for stage monitoring applications. Rest the speaker on the side with rubber feet for use as a stage monitor. Two SRX835Ps can be splayed side by side for wide coverage for large audiences. Simply stand them so that their inside side panels meet. This configuration is ideal atop an SRX828SP subwoofer.
33 TroubleShooting
Symptom Likely Cause What to do Speaker not connected Verify that speaker is connected and that the circuit is on No sound to active AC power
Power not switched on Switch on power and verify that power LED is on
No sound, speaker is connected Speaker power cable is faulty • Re-seat the power cable at both ends. to working AC power but won’t or improperly connected. • Substitute a known-good power cable come on.
Signal source • Check VU meters on the source mixer (mixer, instrument, etc.) • Verify that the tape or CD is playing. is not sending. • Use headphones to verify that the instrument is actually No sound. Speaker comes on. sending an audio signal
Faulty cables and • Disconnect and re-seat signal cables. connections • Replace suspected cable with a known-good cable
The SRX800 does not supply phantom power. Switch to a dynamic No sound with microphone Microphone requires microphone, use a battery powered microphone (if possible), connected directly to the input. phantom power use an external phantom power supply for condenser type microphones.
Signal sounds distorted and Excessive input signal, trying • Reduce the output level of the source. very loud, PEAK light is lit to exceed the capabilities of • Turn down the level controls on the speaker. most of the time. the speakers • Use additional SRX800 speakers.
Review the Owner’s Manual for your mixer and adjust controls as needed. Signal sounds distorted even at • Input sensitivity (gain) Mixer or other source moderate volumes, LIMIT light • Channel faders is overdriven is not lit. • Master faders Once this is done, review the instructions in the Quick Start section of this guide. • Make sure that the MIC/LINE switch is in the LINE (disengaged) position. • Reduce the level settings at speaker. Review the Owner’s Manual for Lots of hiss in the sound, your mixer and adjust controls as needed. the mixer controls are at Improper gain structure • Input sensitivity (gain) very low settings. • Channel faders • Master faders Disconnect the devices that are connected to your speaker one at a time. Noise or hiss heard at output. Noisy source device If the noise goes away, the problem is with the source or the connecting cable. Improper A/C ground or Disconnect or mute channels one at a time to isolate the problem. Refer to faulty equipment connected Hum or Buzz that increases or the owner’s manual of the faulty equipment for troubleshooting help. decreases when the mixer level to mixer input controls are moved. Faulty cable between source Substitute a known-good cable for the suspected faulty cable. equipment and mixer
Improper A/C grounding, • ‘Lift’ the audio ground by using an XLR/F to XLR/M adapter on one end. ground loops • Re-route audio cables away from AC power and lighting cables.
• Use the balanced outputs (if available) of your mixer or source Excessively long equipment to drive your SRX800 speakers. Hum or Buzz unbalanced cable run • Use a “DI” (direct injection) box to convert your unbalanced equipment output to a balanced output.
Improper system gain Reduce the INPUT level controls and increase the output level of your structure source devices.
34 Warranty Information
The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from thedate of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original purchase.
Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warranty service is required.
What Does The JBL Warranty Cover? Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following are not covered: Damage caused by accident, misuse, abuse, product modification or neglect; damage occurring during shipment; damage resulting from failure to follow instructions contained in your Instruction Manual; damage resulting from the performance of repairs by some SRX800 not authorized by JBL; claims based upon any misrepresentations by the seller; any JBL product on which the serial number has been defaced, modified or removed.
Who Pays For What? JBL will pay all labor and material expenses for all repairs covered by this warranty. Please be sure to save the original shipping cartons because a charge will be made if replacement cartons are requested. Payment of shipping charges is discussed in the next section of this warranty.
How To Obtain Warranty Performance If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service Department), 8500 Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818/893-8411). We may direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair. Either way, you’ll need to present the original bill of sale to establish the date of purchase. Please do not ship your JBL product to the factory without prior authorization. If transportation of your JBL product presents any unusual difficulties, please advise us and we may make special arrangements with you. Otherwise, you are responsible for transporting your product for repair or arranging for its transportation and for payment of any initial shipping charges. However, we will pay the return shipping charges if repairs are covered by the warranty.
Limitation of Implied Warranties ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.
EXCLUSION OF CERTAIN DAMAGES JBL’S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE.
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA
35 Contact Information
Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329
Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL)
Customer Service: Monday through Friday 8:00am -5:00pm Pacific Coast Time in the U.S.A.
(800) 8JBLPRO (800.852.5776) www.jblproservice.com
On The World Wide Web: www.jblpro.com
Professional Contacts, Outside the USA: Contact the JBL Professional Distributor in your area. A complete list of JBL Professional international distributors is provided at our U.S.A. website: www.jblpro.com
36 37 Part Number: 5032132 03/15 8500 Balboa Boulevard Northridge, CA 91329 USA www.jblpro.com