Quick Network Setup Guide Printing Through a Queue, Or Sharename
Total Page:16
File Type:pdf, Size:1020Kb
1470NQNSG_FRONT_Eng K PANTONE326 Laser Printer HL-1470N Type of Network Printer An example of a Shared printer*1, An example of a printer Quick Network Setup Guide printing through a queue, or sharename. in a Peer-to-Peer network. 1 A shared printer can been seen in the Network Neighborhood. Follow the instructions for Setting Up the Printer in the "Quick Setup Guide" first. * Printer Printer Printer If you are going to connect the printer to a network, we recommend you contact your system administrator prior to Printer installation. If you are an Administrator: Configure your printer referring to the following instructions. If you are installing the driver on your PC, refer to the reverse side of this sheet after the administrator has configured the printer. LAN USB Parallel LJ5745001 Printed in China ® For the Administrator (For Windows users only) Windows Server Netware Server LAN Install the BRAdmin Professional Configuration utility Windows Workstation (Network) Novell Netware, Windows® 95/Windows NT® 4.0 does not Use the BRAdmin Professional utility to configure the network parameters of Brother network connected printers. support USB printing. LAN (Network) Client Client Client Client Client Insert the CD-ROM. Select the HL-1470N model button, and then Click the Install Software Select BRAdmin Professional. 1 2 3 4 Client select the appropriate language. icon. Install the BRAdmin Professional utility referring to the on-screen instructions. Network Guide Chapter Map Driver Deployment Wizard To configure the print server refer to the Network Guide The Driver Deployment Wizard can be used to help with the installation of locally or network connected Brother To access the Network Guide, insert the CD-ROM supplied with the printer, printers. It can also create self running executable files that automate the installation and configuration of Brother click the Manual icon, and then select the Network Guide. printer drivers onto locally or network connected Windows® systems. Windows® Macintosh® To access the Driver Deployment Wizard, insert the CD-ROM supplied with ® the printer, click the Install Software icon, and then select the Driver Windows 95/98/Me Peer-to-Peer TCP/IP Chapter 3 Peer-to-Peer Printing Deployment Wizard. NetBIOS Chapter 4 NetBIOS Peer-to-Peer Printing Brother Internet Print TCP/IP Chapter 5 How to Configure Internet Printing Netware IPX/SPX Chapter 6 Novell Netware Printing Windows NT® Peer-to-Peer TCP/IP Chapter 2 TCP/IP Printing NetBIOS Chapter 4 NetBIOS Peer-to-Peer Printing DLC/LLC Chapter 8 DLC Printing Brother Internet Print (NT® 4.0 only) TCP/IP Chapter 5 How to Configure Internet Printing Print configuration page Netware IPX/SPX Chapter 6 Novell Netware Printing Windows® 2000 Peer-to-Peer TCP/IP Chapter 2 TCP/IP Printing To print a configuration page, use a fine ball point pen to hold down Test Button NetBIOS Chapter 4 NetBIOS Peer-to-Peer Printing the Network Test Button for less than 5 seconds. DLC/LLC Chapter 8 DLC Printing IPP (Internet Printing Protocol) TCP/IP Chapter 2 TCP/IP Printing Brother Internet Print TCP/IP Chapter 5 How to Configure Internet Printing Factory default setting Netware IPX/SPX Chapter 6 Novell Netware Printing UNIX/Linux TCP/IP Chapter 1 UNIX Printing If you wish to reset the print server back to its default factory Macintosh® AppleTalk Chapter 7 Macintosh Printing settings (resetting all information such as the password and IP TCP/IP Chapter 7 Macintosh Printing address information), use a fine ball point pen to hold down the OS2 Warp Server TCP/IP Chapter 2 TCP/IP Printing Network Test Button for more than 5 seconds. LAN Server NetBIOS Chapter 4 NetBIOS Peer-to-Peer Printing Web Browser Management Function TCP/IP Chapter 9 Web Based Management BRAdmin Professional TCP/IP Chapter 11 BRAdmin Configuration ©2001 Brother Industries, Ltd. ©1998-2001 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a IPX/SPX Chapter 11 BRAdmin Configuration trademark of UNIX Systems Laboratories. PostScript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc. BRAdmin Professional is a trademark of Brother Industries, Ltd. All other brand and product names mentioned in this Quick Network Setup Guide and user's guide are registered trademarks or trademarks of respective companies. 1470NQNSG_BACK_Eng K PANTONE285 Installing the Driver for Network For Network shared printer users Users Step 5 Select the appropriate printer Queue or 'Sharename' Before you continue, please ensure that the administrator has configured the network printer settings correctly. The setup is now complete. Follow the steps in the Quick Setup Guide Select your printer's queue, and then click the OK button. Once the appropriate queue is specified, the printer driver will be installed. before proceeding. 1 2 For Windows® users only For Brother Peer-to-Peer network printer users (LPR- Recommended Peer-to-Peer printing method) Step 5 Configuring the LPR port Step 4 Connect the printer to Your Network For Windows® 95/98/Me users only For Windows NT® 4.0 users only For Windows® 2000 users only & Install the driver I O ON OFF 1 Select "LPR (Recommended)", 2 Enter a unique port name 1 Select "LPR Note: If this screen appears, insert 1 Select "LPR 2 Click the Next button. and then click the Next button. (ex. BLP1), and then click (Recommended)", and the Windows NT® 4.0 CD-ROM into (Recommended)", and then the OK button. then click the Next button. your CD-ROM drive. click the Next button. 1 Click the "Connect the 2 Select the Network cable. 3 Turn off the printer power interface cable & install the switch. driver / utilities." Hub I O 3 Specify the printer's IP 4 Click the Finish button and 2 Enter the printer's IP 3 Click the Finish button and restart 3 Enter the printer's IP 4 Click the Finish button and restart your PC. Address (or click the Browse restart your PC. Address and the queue your PC. Address and a unique port After your PC has restarted, setup will ON OFF button to see a list of After your PC has name BINARY_P1, After your PC has restarted, name, then click the Next be complete. printers), and then click the restarted, setup will be then click the OK button. setup will be complete. button. OK button. complete. 4 Connect the cable to your printer, and 5 Turn on the printer 6 Follow the instructions on then connect it to a free port on your power switch. the screen. hub. For Brother Peer-to-Peer network printer users (NetBIOS) Select the Network Step 5 Configuring the NetBIOS port connection style, and then go to Step 5. You can refer to the figure "Type of Network Printer" on the reverse side of this sheet. 7 Click the Next button. 8 Select the "Network Shared Printer" or the "Brother Peer- to-Peer Network Printer," and 1 Select NetBIOS, and then click the 2 Enter a unique port name (ex. BNT1), 3 Enter the path name (or click the Browse... button to 4 Click the Finish button and restart your PC. then click the Next button. Next button. and then click the OK button. see a list of printer's), and then click the OK button. After your PC has restarted, setup will be complete. For Macintosh® users only Step 4 Connect the printer to your Macintosh® & Install the BR-Script PPD file *2 If the Apple® LaserWriter8 Driver is not installed on your system, you can download it from http://www.apple.com. Hub Note: In the Chooser you will see the name BRN_xxxxxx_P1_AT, I O I O where "xxxxxx" is the last six digits of the Ethernet address. ON OFF ON OFF See Chapter 7 of the Network User's Guide 2 1 Click the "Connect the 2 Select the Network cable. 3 Turn off the 4 Connect the cable to your printer, and 5 Turn on the 6 Follow the instructions on 7 Open the Chooser from the Apple® 8 Click the LaserWriter8* icon. for more information. 9 Select the appropriate print interface cable & install the printer power then connect it to a free port on your hub. printer power the screen. menu on the Macintosh®. (Select the zone you want to server, and then click the driver / utilities." switch. switch. use from the AppleTalk® zones Create button. list.) The setup is now complete..