Liquid Truck Tire Balance the ECO-Friendly Way to Balance Tires!

Total Page：16

File Type：pdf, Size：1020Kb

LIQUID TRUCK TIRE BALANCE The ECO-Friendly Way to Balance Tires! Free Flowing Liquid Tire Balancer and Lubricant! ESCO Liquid Tire Balance is a Free Flowing Liquid Balancer for 22.5” Rims and above* that is EPA Approved. With the Rapid Banning of Lead Weights on Tires, this Product serves as an easy solution. • Instant tire balance for the life of the tire. • T RUCK TIRES RUN 16% COOLER and will extend the tread life by reducing heat build up. • Eliminates Rust on Rims. • Lubricates for a perfect Bead Seat. • Tire Changer Friendly. • Will Not block valve stem. • Does not Freeze. • Increases casing retread ability in new and retreaded tires. * 22.5 and above use 32 oz EXCEPT these tire sizes: 19.5” Tires 16 oz. 235-85R16 Tires 8 oz. 32 oz. Bottle 385 Floats 48 oz. Services One Tire Per Bottle 425 Floats 64 oz. Part No. 20471 445 Floats 64 oz. Recognized for Safer Chemistry www.epa.gov/dfe 15270 Flight Path Drive • Brooksville, FL 34604 www.esco.net • [email protected] Phone (352) 754-1117 • Toll Free (800) 352-9852 US, Canada & Caribbean ONLY Fax (352) 754-4508 LIQUID TRUCK TIRE BALANCE INSTALLATION GUIDE: STEP 1 STEP 2 Remove Valve Core to Release Air From Remove Weights or All Other Balancing Tire Completely. Compounds. STEP 3 STEP 4 Cut the Cap at the Line on the Cap. Install the Application Hose onto Cap. STEP 5 DEMOUNTED APPLICATION Connect Hose to Valve Stem and Squeeze Liquid Tire Balance Can Also Be Installed Bottle to Fill. While the Tire is Demounted. 15270 Flight Path Drive • Brooksville, FL 34604 www.esco.net • [email protected] Phone (352) 754-1117 • Toll Free (800) 352-9852 US, Canada & Caribbean ONLY Fax (352) 754-4508.

Copy Link

Recommended publications

TECHNICAL SERVICE BULLETINS Ultraseal Tire Life Extender/Sealer
Ultraseal Tire Life Extender/sealer ® TECHNICAL SERVICE BULLETINS EXTENDING TIRE LIFE TIRE SIZES, APPLICATIONS & SITUATIONS TO AVOID TUBE-TYPE TIRES MOUNTING SOLUTIONS OUT-OF-ROUND CONDITION AVOIDING VALVE CORE PROBLEMS OUT-OF-BALANCE CONDITION VIBRATIONS RUST AND CORROSION AVOIDING POTENTIAL TREAD SEPARATIONS & ZIPPER RUPTURES QUALITY CONTROL PUNCTURE DOES NOT SEAL ® Ultraseal Tire Life Extender/sealer TECHNICAL SERVICE BULLETIN EXTEND TIRE LIFE Many years ago, Ultraseal R&D developed an anti-aging additive and incorporated it into its manufacturing process to reduce the detrimental effects related to heat buildup in tire casings. In the past, the U.S. Military had experienced excessive dry-rotting in many tires, primarily in desert environments. After installing Ultraseal, careful moni- toring showed that treated tires had significant reduction of incidencdes of dry rot as compared to untreated controls. Ultraseal’s proprietary ability to retard dry rot and maintain the casing's resilience is a remarkable achievement considering dry rot is typically caused by outside contaminants and UV radiation. Ultraseal Tire Life Extender/sealer cannot restore an old tire that has lost elasticity, however, it will inhibit and retard subsequent casing degradation. Retreading is a major cost savings for fleets. The more times a casing can be retreaded, the lower the cost per mile. This represents a substantial savings. Plus, retreading re- duces the environment impact by reducing the number of casings being recycled. Ultraseal Tire Life Extender/sealer will enhance the tire casing in many ways. In new tires, as well as retreads, Ultraseal virtually eliminates porosity and air migration, lowers heat and significantly reduces the occurance of tread, belt and zipper separations.
[Show full text]
Tire Manual.Pdf
Revision Highlights The FedEx Tire Manual has content changes including the following: Chapter 1: Purchasing Jun 2008 1-10: Added Q & A FILING WARRANTY ON TIRES NOT MOUNTED Chapter 2: Warranty Chapter 3: Tire Applications Jun 2008 3-10: Updated Product Codes and Drive Tire Design 3-15: Added Toyota Specs to Cargo Tractors Chapter 4: Maintenance . Chapter 5: Shop Administration . Contents ii Contents Publication Information ........................................................................................................................ vi Chapter 1: Purchasing .......................................................................................................................... 1 1-5: Tire Ordering Process ....................................................................................................................................... 2 Filing Claims – Tires Lost in Shipment ........................................................................................................ 2 Contact Numbers and Procedures .............................................................................................................. 4 1-10: Frequently Asked Questions - Goodyear Tires ............................................................................................... 5 Double Shipment on Tires ........................................................................................................................... 5 Ordered Wrong or Wrong Tires Shipped ...................................................................................................
[Show full text]
The Middle East's First Automotive, Tires & Parts News Source
TP www.tiresandparts.net DHS 20 /- I USD 5.99/- l AUGUST 2015 l The Middle East’s First Automotive, Tires & Parts News Source ISSUE 106 106 ISSUE DXO One Plug-In iPhone Camera PAGE 64 www.alexiatires.com Bespoke tires Specifically designed and produced for you. ART 1100 ART 1200 ART 1300 ART 1400 ART 1500 ART 1600 ART 1700 ART 1900 Guided by the main principles of value, trust, honesty and quality Alexia tires has been proudly manufacturing commercial and OTR tires from Asia with the intention to fill a gap in the replacement tire market. Alexia Tires believes in delivering the greatest value, quality and service without com- promising on innovation and style. With over 35 years of experience in the industry, Alexia Tires is passionate about its work. We bring to the market unique tire products and designs that specialize in the manufacturing of custom products that fit the market requirements of the day. Alexia’s strength lies in its flexibility and its ability to listen to the demands of the market and make subsequent swift changes as needed. Alexia Tires is a global company comprised of passionate designers and engineers who continue to use the latest technology to deliver the most innovative and original tires in the market. With worldwide distribution, Alexia Tires looks forward to further reaching out to the masses with truly one of a kind products and continuing to be trailblazers in the industry. For exclusive territory enquiries pls contact [email protected]. PUBLISHER’S NOTE The finalization of Iran’s historic nuclear deal with the United States and five other major world powers portends a new era for the automotive industry in the Middle East region.
[Show full text]
Tyre Dynamics, Tyre As a Vehicle Component Part 1.: Tyre Handling Performance
1 Tyre dynamics, tyre as a vehicle component Part 1.: Tyre handling performance Virtual Education in Rubber Technology (VERT), FI-04-B-F-PP-160531 Joop P. Pauwelussen, Wouter Dalhuijsen, Menno Merts HAN University October 16, 2007 2 Table of contents 1. General 1.1 Effect of tyre ply design 1.2 Tyre variables and tyre performance 1.3 Road surface parameters 1.4 Tyre input and output quantities. 1.4.1 The effective rolling radius 2. The rolling tyre. 3. The tyre under braking or driving conditions. 3.1 Practical brakeslip 3.2 Longitudinal slip characteristics. 3.3 Road conditions and brakeslip. 3.3.1 Wet road conditions. 3.3.2 Road conditions, wear, tyre load and speed 3.4 Tyre models for longitudinal slip behaviour 3.5 The pure slip longitudinal Magic Formula description 4. The tyre under cornering conditions 4.1 Vehicle cornering performance 4.2 Lateral slip characteristics 4.3 Side force coefficient for different textures and speeds 4.4 Cornering stiffness versus tyre load 4.5 Pneumatic trail and aligning torque 4.6 The empirical Magic Formula 4.7 Camber 4.8 The Gough plot 5 Combined braking and cornering 5.1 Polar diagrams, Fx vs. Fy and Fx vs. Mz 5.2 The Magic Formula for combined slip. 5.3 Physical tyre models, requirements 5.4 Performance of different physical tyre models 5.5 The Brush model 5.5.1 Displacements in terms of slip and position. 5.5.2 Adhesion and sliding 5.5.3 Shear forces 5.5.4 Aligning torque and pneumatic trail 5.5.5 Tyre characteristics according to the brush mode 5.5.6 Brush model including carcass compliance 5.6 The brush string model 6.
[Show full text]
POLITECNICO DI TORINO Analysis of the Effect of Tire Inflation Pressure on Vehicle Dynamics and Control Strategies
POLITECNICO DI TORINO Collegio di Ingegneria Meccanica, Aerospaziale, dell'Autoveicolo e della Produzione Corso di Laurea Magistrale in Automotive Engineering (Ingegneria dell’Autoveicolo) Tesi di Laurea Magistrale Analysis of the effect of tire inflation pressure on vehicle dynamics and control strategies Relatori Candidato Prof. Stefano d’Ambrosio Carlo Di Pasquale Prof. Nicola Amati Novembre/Dicembre 2018 II Introduction Tires, being the interface between the vehicle on the road have a huge influence on vehicle performance: through the tires the vehicle is able to exert traction, braking and cornering forces. A key parameter in particular that affects tire capabilities is inflation pressure. According to the National Highway Traffic Safety Administration (NHTSA) more than a quarter of automobiles travel with underinflated tires in the U.S. [1], while a study by Michelin and Kwik Fit evidenced a percentage of the 40% in the U.K. [2]. An under-inflation creates not only safety issues, affecting the handling of the vehicle, but results also in an increased tire wear and fuel consumption (due to a bigger rolling resistance): a reduction of 0,5 bar from the recommended inflation pressure brings to a growth of rolling resistance of about the 10% bringing to an increase of consumptions of the 1-2% [3]. The ATCP (Active Tire Pressure Control) team has the goal to develop a system capable to monitor and maintain a desired pressure, that can be regulated according to the working conditions of the vehicle. The opportunities of a pressure control are several: from on optimization of consumptions (and consequently CO2 emissions) to a control of the cornering and braking behaviour of the vehicle.
[Show full text]
Technical Service Bulletin WHEEL/TIRE VIBRATION – BALANCE and RADIAL FORCE SUBJECT: VARIATION (RFV) SERVICE PROCEDURES
GROUP NUMBER SUSPENSION 20-SS-004HG DATE MODEL(S) NOVEMBER 2020 G80 (DH) G90 (HI) Technical Service Bulletin WHEEL/TIRE VIBRATION – BALANCE AND RADIAL FORCE SUBJECT: VARIATION (RFV) SERVICE PROCEDURES Description: This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the “Tire Balance Data Sheet” must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin. Applicable Vehicles: 17-18MY Genesis G80 (DH), 17-18MY Genesis G90 (HI) Warranty Information: Normal warranty applies. Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair SUBJECT: WHEEL/TIRE VIBRATION – BALANCE AND RADIAL FORCE VARIATION (RFV) SERVICE PROCEDURES Important Notes About Wheel/Tire Balance and RFV Measurements: For all wheel/tire balance and RFV vibration claims, the Data Sheet (attached at the end of this TSB) must be completed and attached with the repair order documentation. Air pressure must be set to specification (cold) according to the vehicle placard BEFORE performing any service procedures. ALL RFV measurements MUST be taken with warm tires. o If the RFV measurements cannot be taken immediately after the warm up drive, lift the vehicle on a hoist to remove weight from the tires. Raising the wheels will help prevent temporary flat spots from developing. Identify the customer concern accurately, and record the concern on the Data Sheet. o If the concern is vibration that occurs during the first few minutes of driving, but improves over time, temporary tire flat spotting is likely the cause.
[Show full text]
United States Patent [191 [11] 4,340,104 Kuan [45] Jul
United States Patent [191 [11] 4,340,104 Kuan [45] Jul. 20, 1982 3,739,829 6/1973 Powell et a1. ................. .. 152/330 R [54] DEFLATED TIRE LUBRICANT 3,850,217 11/1974 Edwards et a1. 152/330 RF [75] Inventor: Tiong H. Kuan, Stow, Ohio 3,931,843 l/ 1976 Edwards et al. .. 4,045,362 8/1977 Kuan et a1. [73] Assignee: The General Tire & Rubber Company, 4,057,092 11/1977 Tracy .......... .. .. l52/379.l Akron, Ohio 4,096,898 6/1978 Mosserly et a1. .... .. [21] Appl. No.: 134,832 Primary Examiner—John E. Kittle [22] Filed: Mar. 28, 1980 [57] ABSTRACT . Related US. Application Data To facilitate relative movement between thelinternal surfaces of a pneumatic tire which come into contact [63] Continuation of Ser. No. 920,673, Jun. 30, 1978, aban when the tire is run in a de?ated condition, the interior doned. of the tire is coated with a lubricant which does not [51] Int. Cl.3 ....................... .. B60C 17/00; B60C 5/12 ?ow at normal tire operating temperatures. The matrix [52] US. Cl. .............................. .. 152/330 L; 152/347; of the lubricant is a polyester, polyurea or polyurethane ' 252/51.5 A; 252/56 R; 252/56 S which does not begin to flow until the tire reaches a [58] Field of Search ............. .. 152/152, 330 R, 330 L, temperature of from 65° C. to 150° C. If the lubricant 152/330 RF, 347, 374; 156/115; 252/51.5 A, 56 were allowed to flow at operating temperatures, it S, 56 R would adversely effect the balance and performance of p [56] References Cited the tire.
[Show full text]
Tire Balance Data Sheet (Last Page of This TSB) for ALL Claims, Stored with the Repair Order
2012 SCCP -11/12 <EJ;> HVUnDRI P16 - REVA 2012 Select Car Care Promotion P16 We are pleased to announce the Hyundai 2012 Select Car Care Promotion! Applies to Select 2013 Equus Models in dealer inventory Dealers are encouraged to perform this Select Car Care Promotion on all dealer stock vehicles. Check each VIN in the Hyundai Motor America "Warranty Vehicle Information" screen via WEBDCS for P16 showing as open. A copy of the announcement bulletin and how to perform the promotion is available on HMAService.com Home Page under "Service News." Benefits: • Ensures optimized ride-performance of dealer stock Equus vehicles. • Ensures customer satisfaction for new buyers. *IMPORTANT Campai!:m Parameters: Campaign must be performed on all dealer stock vehicles that fit the following parameters: • 20 13MY VI Equus produced from March 30, 2012 to November 2, 2012. CLAIM INFORMATION: Submit Select Car Care Promotion claims using the Campaign Claim Entry Screen OP CODE OPERATION OP TIME 20C 1071 0 Measure balance and RFV 1.0 M/H 20C 107 R1 Measure ba lance and RFV, Force-Match 1 tire 1.1 M/H 20C 107R2 Measure ba lance and RFV, Force-Match 2 tires 1.2 M/H 20C107R3 Measure ba lance and RFV, Force-M atch 3 tires 1.3 M/H 20C107R4 Measure balance and RFV, Force-Match 4 tires 1.4 M/H Promotion expires February 28, 2013. All repair orders (R.O.) must be dated on or before February 28, 2013. All dealer claims must be submitted to HMA on or before March 31, 2013.
[Show full text]
Tire - Wikipedia, the Free Encyclopedia
Tire - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Tire Tire From Wikipedia, the free encyclopedia A tire (or tyre ) is a ring-shaped covering that fits around a wheel's rim to protect it and enable better vehicle performance. Most tires, such as those for automobiles and bicycles, provide traction between the vehicle and the road while providing a flexible cushion that absorbs shock. The materials of modern pneumatic tires are synthetic rubber, natural rubber, fabric and wire, along with carbon black and other chemical compounds. They consist of a tread and a body. The tread provides traction while the body provides containment for a quantity of compressed air. Before rubber was developed, the first versions of tires were simply bands of metal that fitted around wooden wheels to prevent wear and tear. Early rubber tires were solid (not pneumatic). Today, the majority of tires are pneumatic inflatable structures, comprising a doughnut-shaped body of cords and wires encased in rubber and generally filled with compressed air to form an inflatable cushion. Pneumatic tires are used on many types of vehicles, including cars, bicycles, motorcycles, trucks, earthmovers, and aircraft. Metal tires are still used on locomotives and railcars, and solid rubber (or Stacked and standing car tires other polymer) tires are still used in various non-automotive applications, such as some casters, carts, lawnmowers, and wheelbarrows. Contents 1 Etymology and spelling 2 History 3 Manufacturing 4 Components 5 Associated components 6 Construction types 7 Specifications 8 Performance characteristics 9 Markings 10 Vehicle applications 11 Sound and vibration characteristics 12 Regulatory bodies 13 Safety 14 Asymmetric tire 15 Other uses 16 See also 17 References 18 External links Etymology and spelling Historically, the proper spelling is "tire" and is of French origin, coming from the word tirer, to pull.
[Show full text]
Tire Precipitated Silica Industry & Markets 2020
Confidential Report Rubber Chemical Consultants Ltd Tire Precipitated Silica Industry & Markets 2020 (3rd Edition) Page 1 of 111 Report Number: RCCL204 Issue Date: 30th October 2020 Company1: 1 This report is licensed for use within the designated company only. Distribution of this report, either fully or partially, outside of the designated company is strictly prohibited. Rubber Chemical Consultants Ltd | Office 7, 35-37 Ludgate Hill, London, EC4M 7JN. UK Registered Company, no: 06863349 The statements, opinions and/or recommendations contained herein are based on information believed to be reliable. However, Rubber Chemical Consultants Ltd makes no warranty or guarantee of accuracy or completeness in connection therewith, nor, with respect to any proposed application or course of action. Information included in this report is Confidential and shall not be copied, unless otherwise designated in the report or by written permission from Rubber Chemical Consultants Ltd. © Rubber Chemical Consultants Ltd 2018. Page 2 of 111 Rubber Chemical Consultants Ltd RCCL204 th Tire Precipitated Silica Industry & Markets 2020 30 October 2020 Tire Precipitated Silica Industry & Markets 2020 1 CONTENTS 2 Executive Summary ............................................................................................................................... 9 2.1 Scope ............................................................................................................................................. 9 2.2 Objectives.....................................................................................................................................
[Show full text]
TIRES Proper Tire Care and Safety Is Simple and Easy
HOW TO TAKE CARE YOUR TIRE OF YOUR MAINTENANCE CHECKLIST TIRES Proper tire care and safety is simple and easy. The Rubber Manufacturers Association (RMA) recommends PRESSURE getting in the habit of taking five minutes every month Underinflation can lead to tire to check your tires, including the spare. failure. It results in unnecessary If you think you may have a tire problem or are tire stress, irregular wear, loss of unsure of the condition of your tires, consult a tire control and accidents. A tire can dealer as soon as possible. lose up to half of its air pressure and not appear to be flat! ABOUT THE RUBBER MANUFACTURERS ASSOCIATION A LIGNMENT A bad jolt from hitting a curb or pothole can throw Founded in 1915, the Rubber Manufacturers your front end out of alignment and damage your Association is the national trade association of the tires. Have a tire dealer check the alignment periodi- rubber industry. The association is headquartered in cally to ensure that your car is properly aligned. Washington, D.C. and its membership includes more than 100 companies that manufacture tires and other rubber products. OTATION 1400 K Street, NW R Washington, DC, 20005 Regularly rotating your vehicle’s tires will help you 202/682-4800 achieve more uniform wear. Unless your vehicle fax 202/682-4854 owner’s manual has a specific recommendation, the www.betiresmart.org guideline for tire rotation is approximately every 6,000–8,000 miles. RMA TIRE TREAD MANUFACTURER MEMBERS: Advanced and unusual wear can reduce the Bridgestone Americas Holding, Inc.
[Show full text]
Everything Rides on It
Everything Rides on It tudies of tire safety show that maintaining proper tire pressure, observing tire and vehicle load limits (not carrying more weight in your vehicle than your tires or vehicle can safely handle), avoiding road hazards, and inspecting tires for cuts, slashes, and other irregularities are the most important things you can do to avoid tire failure such as tread separation or blowout and flat tires. These actions along with other care and maintenance activities can also: Improve vehicle handling; Help protect you and others from avoidable breakdowns and crashes; Improve fuel economy; and Increase the life of your tires. This booklet presents a comprehensive overview of tire safety, including information on the following topics: Basic tire maintenance; Uniform Tire Quality Grading System; Fundamental characteristics of tires; and Tire safety tips. Use this information to make tire safety a regular part of your vehicle maintenance routine. Recognize that the time you spend is minimal compared with the inconvenience and safety consequences of a flat tire or other tire failure. Safety First–Basic Tire Maintenance Properly maintained tires improve the steering, stopping, traction, and load-carrying capability of your vehicle. Underinflated tires and overloaded vehicles are a major cause of tire failure. Therefore, as mentioned above, to avoid flat tires and other 1 types of tire failure, you should maintain proper tire pressure, observe tire and vehicle load limits, avoid road hazards, and regularly inspect your tires. Finding Your Vehicle’s Recommended Tire Pressure and Load Limits Tire information placards and vehicle certification labels contain information on tires and load limits.
[Show full text]