File:Thinking Obliquely.Pdf

Total Page:16

File Type:pdf, Size:1020Kb

File:Thinking Obliquely.Pdf NASA AERONAUTICS BOOK SERIES A I 3 A 1 A 0 2 H D IS R T A O W RY T A Bruce I. Larrimer MANUSCRIP . Bruce I. Larrimer Library of Congress Cataloging-in-Publication Data Larrimer, Bruce I. Thinking obliquely : Robert T. Jones, the Oblique Wing, NASA's AD-1 Demonstrator, and its legacy / Bruce I. Larrimer. pages cm Includes bibliographical references. 1. Oblique wing airplanes--Research--United States--History--20th century. 2. Research aircraft--United States--History--20th century. 3. United States. National Aeronautics and Space Administration-- History--20th century. 4. Jones, Robert T. (Robert Thomas), 1910- 1999. I. Title. TL673.O23L37 2013 629.134'32--dc23 2013004084 Copyright © 2013 by the National Aeronautics and Space Administration. The opinions expressed in this volume are those of the authors and do not necessarily reflect the official positions of the United States Government or of the National Aeronautics and Space Administration. This publication is available as a free download at http://www.nasa.gov/ebooks. Introduction v Chapter 1: American Genius: R.T. Jones’s Path to the Oblique Wing .......... ....1 Chapter 2: Evolving the Oblique Wing ............................................................ 41 Chapter 3: Design and Fabrication of the AD-1 Research Aircraft ................75 Chapter 4: Flight Testing and Evaluation of the AD-1 ................................... 101 Chapter 5: Beyond the AD-1: The F-8 Oblique Wing Research Aircraft ....... 143 Chapter 6: Subsequent Oblique-Wing Plans and Proposals ....................... 183 Appendices Appendix 1: Physical Characteristics of the Ames-Dryden AD-1 OWRA 215 Appendix 2: Detailed Description of the Ames-Dryden AD-1 OWRA 217 Appendix 3: Flight Log Summary for the Ames-Dryden AD-1 OWRA 221 Acknowledgments 230 Selected Bibliography 231 About the Author 247 Index 249 iii This time-lapse photograph shows three of the various sweep positions that the AD-1's unique oblique wing could assume. (NASA) iv On December 21, 1979, the National Aeronautics and Space Administration (NASA) AD-1 Oblique Wing Research Aircraft (OWRA) took off from the main runway at Edwards Air Force Base (AFB), CA, for a 45-minute checkout flight. It marked the world’s first flight of a piloted oblique-wing airplane. This historic flight, which was flown with the airplane’s wing at its “straight” (0-degree angle) position, was soon followed by flights at wing angles of 15 degrees, 20 degrees, 45 degrees, and finally on April 24, 1981, at the 60-degree-angle design goal, thus proving the aerodynamic concept of an airplane with an oblique-wing configuration. This initial oblique-wing program, which ran from 1976 through 1982, was a joint effort between NASA’s Ames Research Center and Dryden Flight Research Center, CA, thus giving rise to the aircraft’s name—Ames-Dryden AD-1 Oblique Wing Research Aircraft.1 Extensive research, wind tunnel and computer-code testing, and model-building and testing projects were undertaken at Ames, and flight simulation, flight testing, and flight evalu- ation were conducted at Dryden. While the concept of the oblique wing was developed during World War II, and the landmark wind tunnel tests of John P. Campbell and Hubert M. Drake were undertaken just follow- ing the end of the war, most aeronautical attention in the postwar era concentrated on the continuous refinement of symmetrical point-forward swept-wing aircraft. Serious attention, however, once again turned to the oblique wing in the 1970s, resulting in the research activities discussed in this book. Chapter 1 reviews the life of NASA aerodynamicist Robert T. Jones and his path to the oblique wing. Chapter 2 covers the extensive wind tunnel, model, computer-code, and simulation testing, first at Langley and later at Ames, as well as a number of NASA industry design contracts undertaken by Boeing and Lockheed. Chapter 3 reviews the design and fabrication of the AD-1 Oblique Wing Research Aircraft and its subsequent proposed use as a joined-wing demonstrator. Chapter 4 describes the flight test- ing and flight evaluation of the AD-1. Chapter 5 reviews the supersonic F-8 followup oblique-wing program. And, finally, chapter 6 reviews the subsequent oblique-wing plans and proposals. Appendices present the physical characteristics of the AD-1 aircraft, a detailed description of it, and a summary flight log of its flight research program. v Thinking Obliquely Writing the history of the AD-1 proved both a challenge and a pleasure. I am very grateful to all who have assisted me in this endeavor. A listing of those who were particularly helpful follows the appendices. Bruce I. Larrimer Columbus, OH March 12, 2012 1. From September 27, 1959, until March 26, 1976, NASA Dryden was known as the NASA Flight Research Center. From March 26, 1976, until October 1, 1981, the Center was known as the NASA Hugh L. Dryden Flight Research Center. From October 1, 1981, until March 1, 1994, the Center was part of NASA Ames and was known as the NASA Ames-Dryden Flight Research Facility. On March 1, 1994, the Center once again became a separate operational entity and since then has used its previous designation as the NASA Hugh L. Dryden Flight Research Center, being more simply known as the NASA Dryden Flight Research Center, which is how it is referred to throughout this book. vi NACA-NASA research scientist Robert T. Jones. (NASA) viii CHAPTER 1 American Genius R.T. Jones’s Path to the Oblique Wing Robert Thomas “R.T.” Jones was born on May 28, 1910, in the farming com- munity of Macon, MO, and died on August 11, 1999, in Los Altos Hills, CA. In the intervening 89 years, Jones more than fulfilled the definition of genius, and his lifetime in aeronautics constituted a particularly productive and well- lived life. In his progression to distinction, Jones resembles far more the 17th century’s largely self-taught and broadly interested “natural philosopher” than the rigorously educated, university-trained STEM (science, technology, engi- neering, and mathematics) über-specialized professional of the modern era.1 Jones’s lifelong consuming interest in aviation started at an early age when he built rubberband-powered model airplanes and assembled airplane models with scaled drawings from the Ideal Model Airplane Supply Company. In his rural Macon, MO, high school, Jones acquired an interest in mathematics from his math teacher, Iva Z. Butler, who guided him “along the intricate path through exponents, logarithms, and trigonometry.”2 Following the nationwide increase in interest in aviation resulting from Charles Lindbergh’s nonstop transatlantic flight in 1927, Jones was readily able to purchase the magazines Aviation and Aero Digest in his hometown of Macon. These pub- lications contained technical articles, which Jones read with great inter- est, as well as notices of Technical Reports (TRs) of the National Advisory Committee for Aeronautics (NACA, the forerunner to NASA), which Jones was able to purchase from the Government Printing Office for as little as 10 or 15 cents. In regard to his interest in aviation, Jones noted that he must have puzzled his high school English teacher with all the essays he wrote on aeronautics-related subjects. After graduation, Jones attended the University of Missouri to study engineering but left college after the first year because the university did not offer courses in aeronautics and he “found the other subjects rather uninteresting.”3 In dropping out of college after a year, Jones followed in the footsteps of his father, who also had quit after 1 year, and then read the law and passed the bar examination to practice as an attorney in Missouri. 1 Thinking Obliquely The Evolution of a Practical Engineer-Scientist After leaving college, Jones returned to Macon, working for the Marie Meyer Flying Circus. In exchange for odd jobs, such as fueling its Curtiss JN-4 Jenny aircraft and patching its often-damaged fabric-covered lower wingtips, Jones received free flying lessons—although it would take another 50 years before he would make his first solo flight and subsequently receive his pilot’s license. In 1929, at the age of 19, Jones was hired as the chief and only engineer of the Nicholas-Beazley Airplane Company, Inc., of Marshall, MO, after Charles Fower, a friend of Jones’s, told Russell Nicholas that Jones “knew everything there was to know about airplanes.” Jones obtained this engineering position due to the departure of Walter Barling, who had been the principal designer of the company’s NB-3 of 1928, a low-wing, single-engine, two-place, open-cockpit monoplane of straightforward design that enjoyed brief, modest commercial success. Later, the company hired Thomas Kirkup, a certified engineer from England who taught Jones how to undertake stress calculations. At its peak production, Nicholas-Beazley, which Jones noted was well-placed to become the center of small airplane production in the United States, was producing an airplane per day, but the company failed during the Great Depression and Jones soon found himself back in his hometown of Macon. During this time back in Macon, Jones continued his self-study by reading books on aeronautics, includ- ing Max M. Munk’s Fundamentals of Fluid Mechanics for Aircraft Designers, his introduction to an individual who was himself a towering figure in aeronautics and who would have a profound effect upon Jones’s life and work.4 During the depth of the Depression, Jones, desperate for work, hitched a ride to Washington, DC, with some neighbors. Once in Washington, he immediately visited his local Congressman, who secured for him a position as an elevator operator in the House Office Building. Jones took advantage of this welcome security to further his study of mathematics by studying books from the Library of Congress and attending evening classes in aerodynam- ics taught by Max Munk at Catholic University.
Recommended publications
  • CANARD.WING LIFT INTERFERENCE RELATED to MANEUVERING AIRCRAFT at SUBSONIC SPEEDS by Blair B
    https://ntrs.nasa.gov/search.jsp?R=19740003706 2020-03-23T12:22:11+00:00Z NASA TECHNICAL NASA TM X-2897 MEMORANDUM CO CN| I X CANARD.WING LIFT INTERFERENCE RELATED TO MANEUVERING AIRCRAFT AT SUBSONIC SPEEDS by Blair B. Gloss and Linwood W. McKmney Langley Research Center Hampton, Va. 23665 NATIONAL AERONAUTICS AND SPACE ADMINISTRATION • WASHINGTON, D. C. • DECEMBER 1973 1.. Report No. 2. Government Accession No. 3. Recipient's Catalog No. NASA TM X-2897 4. Title and Subtitle 5. Report Date CANARD-WING LIFT INTERFERENCE RELATED TO December 1973 MANEUVERING AIRCRAFT AT SUBSONIC SPEEDS 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. L-9096 Blair B. Gloss and Linwood W. McKinney 10. Work Unit No. 9. Performing Organization Name and Address • 760-67-01-01 NASA Langley Research Center 11. Contract or Grant No. Hampton, Va. 23665 13. Type of Report and Period Covered 12. Sponsoring Agency Name and Address Technical Memorandum National Aeronautics and Space Administration 14. Sponsoring Agency Code Washington , D . C . 20546 15. Supplementary Notes 16. Abstract An investigation was conducted at Mach numbers of 0.7 and 0.9 to determine the lift interference effect of canard location on wing planforms typical of maneuvering fighter con- figurations. The canard had an exposed area of 16.0 percent of the wing reference area and was located in the plane of the wing or in a position 18.5 percent of the wing mean geometric chord above the wing plane. In addition, the canard could be located at two longitudinal stations.
    [Show full text]
  • Video Preview
    “People should know just how evil war can be. It is all well and good talking about the glory, but a lot of people get killed.” —Ken Wilkinson, Battle of Britain Spitfire Pilot, Royal Air Force Table of Contents Click the section title to jump to it. Click any blue or purple head to return: Video Preview Video Voices Connect the Video to Science and Engineering Design Explore the Video Explore and Challenge Identify the Challenge Investigate, Compare, and Revise Pushing the Envelope Build Science Literacy through Reading and Writing Summary Activity Next Generation Science Standards Common Core State Standards for ELA & Literacy in Science and Technical Subjects Assessment Rubric For Inquiry Investigation Video Preview "The Spitfire" is one of 20 short videos in the series Chronicles of Courage: Stories of Wartime and Innovation. At the start of World War II, the Battle of Britain erupted, and cities across England were Germany’s targets. The Royal Air Force (RAF) relied on one of their most beloved planes—the Supermarine Spitfire—and the brand-new radar technology to defend their homeland against Hitler and his attacking military. Time Video Content 0:00–0:16 Series opening 0:17–1:22 Why the Battle of Britain matters 1:23–1:44 One of The Few 1:45–2:57 The nimble Supermarine Spitfire 2:58 –4:04 The British could sniff out German aircraft 4:05–5:28 How Radio Detection and Ranging works 5:29–6:02 A victorious turning point 6:03–6:18 Closing credits Chronicles of Courage: Stories of Wartime and Innovation “The Spitfire” 1 Video Voices—The Experts Tell the Story By interviewing people who have demonstrated courage in the face of extraordinary events, the Chronicles of Courage series keeps history alive for current generations to explore.
    [Show full text]
  • Study on Thin Airfoil Theory and Performance Test of Elliptical Wing As Compared to Model Mosquito Wing and NACA 64A012 Mod Airfoil
    EJERS, European Journal of Engineering Research and Science Vol. 3, No. 4, April 2018 Study on Thin Airfoil Theory and Performance Test of Elliptical Wing as Compared to Model Mosquito Wing and NACA 64A012 Mod Airfoil Nesar Ali, Mostafizur R. Komol, and Mohammad T. Saki their elevated flying characteristics, flying insects give Abstract—Thin airfoil theory is a simple conception of researchers inspiration for biomimetic fabrications of airfoils that describes angle of attack to lift for incompressible, insect’s wing and many model aircraft wing. We also inviscid flows. It was first devised by famous German- analyze the four basic principle forces acting on an aircraft American mathematician Max Munk and therewithal refined in flight and insect’s flying [1], [15]. by British aerodynamicist Hermann Glauertand others in the 1920s. The thin airfoil theory idealizes that the flow around an Flight is the astonishment that has long been a part of the airfoil as two-dimensional flow around a thin airfoil. It can be natural world. Birds fly and insect’s flying not only by conceived as addressing an airfoil of zero thickness and infinite flapping their wings, but by gliding with their wings wingspan. Thin airfoil theory was particularly citable in its day convoluted for long distances. Likewise, man-made aircraft because it provided a well-established theoretical basis for the bank on this philosophy to overcome the force of gravity following important prominence of airfoils in two-dimensional and achieve enough flight. Lighter-than-air craft, such as the flow like i) on a symmetric shape of airfoil which center of pressure and aerodynamic center remain exactly one quarter hot air balloon, dispense on the Buoyancy principle.
    [Show full text]
  • Evolving the Oblique Wing
    NASA AERONAUTICS BOOK SERIES A I 3 A 1 A 0 2 H D IS R T A O W RY T A Bruce I. Larrimer MANUSCRIP . Bruce I. Larrimer Library of Congress Cataloging-in-Publication Data Larrimer, Bruce I. Thinking obliquely : Robert T. Jones, the Oblique Wing, NASA's AD-1 Demonstrator, and its legacy / Bruce I. Larrimer. pages cm Includes bibliographical references. 1. Oblique wing airplanes--Research--United States--History--20th century. 2. Research aircraft--United States--History--20th century. 3. United States. National Aeronautics and Space Administration-- History--20th century. 4. Jones, Robert T. (Robert Thomas), 1910- 1999. I. Title. TL673.O23L37 2013 629.134'32--dc23 2013004084 Copyright © 2013 by the National Aeronautics and Space Administration. The opinions expressed in this volume are those of the authors and do not necessarily reflect the official positions of the United States Government or of the National Aeronautics and Space Administration. This publication is available as a free download at http://www.nasa.gov/ebooks. Introduction v Chapter 1: American Genius: R.T. Jones’s Path to the Oblique Wing .......... ....1 Chapter 2: Evolving the Oblique Wing ............................................................ 41 Chapter 3: Design and Fabrication of the AD-1 Research Aircraft ................75 Chapter 4: Flight Testing and Evaluation of the AD-1 ................................... 101 Chapter 5: Beyond the AD-1: The F-8 Oblique Wing Research Aircraft ....... 143 Chapter 6: Subsequent Oblique-Wing Plans and Proposals ....................... 183 Appendices Appendix 1: Physical Characteristics of the Ames-Dryden AD-1 OWRA 215 Appendix 2: Detailed Description of the Ames-Dryden AD-1 OWRA 217 Appendix 3: Flight Log Summary for the Ames-Dryden AD-1 OWRA 221 Acknowledgments 230 Selected Bibliography 231 About the Author 247 Index 249 iii This time-lapse photograph shows three of the various sweep positions that the AD-1's unique oblique wing could assume.
    [Show full text]
  • Supersonic Biplane Design Via Adjoint Method A
    SUPERSONIC BIPLANE DESIGN VIA ADJOINT METHOD A DISSERTATION SUBMITTED TO THE DEPARTMENT OF AERONAUTICS AND ASTRONAUTICS AND THE COMMITTEE ON GRADUATE STUDIES OF STANFORD UNIVERSITY IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY Rui Hu May 2009 c Copyright by Rui Hu 2009 All Rights Reserved ii I certify that I have read this dissertation and that, in my opinion, it is fully adequate in scope and quality as a dissertation for the degree of Doctor of Philosophy. (Antony Jameson) Principal Adviser I certify that I have read this dissertation and that, in my opinion, it is fully adequate in scope and quality as a dissertation for the degree of Doctor of Philosophy. (Robert W. MacCormack) I certify that I have read this dissertation and that, in my opinion, it is fully adequate in scope and quality as a dissertation for the degree of Doctor of Philosophy. (Gianluca Iaccarino) Approved for the University Committee on Graduate Studies. iii Abstract In developing the next generation supersonic transport airplane, two major challenges must be resolved. The fuel efficiency must be significantly improved, and the sonic boom propagating to the ground must be dramatically reduced. Both of these objec- tives can be achieved by reducing the shockwaves formed in supersonic flight. The Busemann biplane is famous for using favorable shockwave interaction to achieve nearly shock-free supersonic flight at its design Mach number. Its performance at off-design Mach numbers, however, can be very poor. This dissertation studies the performance of supersonic biplane airfoils at design and off-design conditions.
    [Show full text]
  • Actuator Saturation Analysis of a Fly-By-Wire Control System for a Delta-Canard Aircraft
    DEGREE PROJECT IN VEHICLE ENGINEERING, SECOND CYCLE, 30 CREDITS STOCKHOLM, SWEDEN 2020 Actuator Saturation Analysis of a Fly-By-Wire Control System for a Delta-Canard Aircraft ERIK LJUDÉN KTH ROYAL INSTITUTE OF TECHNOLOGY SCHOOL OF ENGINEERING SCIENCES Author Erik Ljudén <[email protected]> School of Engineering Sciences KTH Royal Institute of Technology Place Linköping, Sweden Saab Examiner Ulf Ringertz Stockholm KTH Royal Institute of Technology Supervisor Peter Jason Linköping Saab Abstract Actuator saturation is a well studied subject regarding control theory. However, little research exist regarding aircraft behavior during actuator saturation. This paper aims to identify flight mechanical parameters that can be useful when analyzing actuator saturation. The studied aircraft is an unstable delta-canard aircraft. By varying the aircraft’s center-of- gravity and applying a square wave input in pitch, saturated actuators have been found and investigated closer using moment coefficients as well as other flight mechanical parameters. The studied flight mechanical parameters has proven to be highly relevant when analyzing actuator saturation, and a simple connection between saturated actuators and moment coefficients has been found. One can for example look for sudden changes in the moment coefficients during saturated actuators in order to find potentially dangerous flight cases. In addition, the studied parameters can be used for robustness analysis, but needs to be further investigated. Lastly, the studied pitch square wave input shows no risk of aircraft departure with saturated elevons during flight, provided non-saturated canards, and that the free-stream velocity is high enough to be flyable. i Sammanfattning Styrdonsmättning är ett välstuderat ämne inom kontrollteorin.
    [Show full text]
  • Program Monitors
    ALLEVIATION OF FUSELAGE FORM DRAG USING VORTEX FLOWS DOE/CE/15277--T1 Final Report on work performed under TI89 004158 U.S. Department of Energy Grant DE-FG01-86CE15277 15 September 1987 DISCLAIMER DR. A. Wortman This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness. or usefulness of any information, apparatus, product, or . process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom- mendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. ISTAR INC. 406 Aka Avenue Santa Monica, CA 90402 (213) 394-7332 PROGRAM MONITORS: _* T. Levinson D. Mello DISCLAIMER Portions of this document may be illegible electronic image products. Images are produced from the best available original document. FOREWORD AND ACKNOWLEDGEMENTS The concept of employing discrete large vortices, to develop favorable cross-flow and to energize the boundary layer in the aft regions of transport aircraft fuselages, was first proposed by the author almost 10 years ago as an apparently original approach to the reduction of fuselage drag. A series of feasibility demonstration proposals, starting with the 1981 USAF DESAT program was submitted to various U.S.
    [Show full text]
  • NASA Contractor Report 165749
    NASA Contractor Report 165749 (IASA-Ci!- 165749) SUUSQNli PIfCti- UP Etb 1-30137 ALLEVIATICN ON A 7U CEG DELTA hXh2 (Viqyau Rl~ssdrch Associates, Inc,) LO p HC A02/64F 801 CSCL 1)1C (iluclas Gj/OU &7267 SUBSONIC PITCH-UP ALLEVIATION ON A 74 DEG. DELTA WING Dhanvada W. Raa9iI: and Thomas D, Johnson, Jr. VIGYAN RESEARCH ASSOCIATES, INC . 28 Research Drive Hampton, Virgini a 23666 Contract NAS1-16259 July 1981 National Aeronautis and Space Administration Langley Reamrch Center Hampton,Virginia 23665 SUBSONIC PITCH-UP ALLEVIATION ON A 74-REG, DELTA WING Rhanvada M, Rao Vigyan Research Associates, Inc. and Thomas 0. Johnson, Jr. Kentron International, Inc. tiampton Technical Center SUMMARY Fixed leading-edge devices were investigated on a 74-deg. delta wing model for alleviating the low speed pitch-up and longi- tudinal instability following the onset of leading edge separation. Wind tunnel tests showed Pylon Vortex Generators to be highly effective, compared to the leading-edge fences and slots also investigated. The best Pylon Vortex Generator arrangement raised the pitch-up angle of attack from 8 deg. on the basic wing to 28 deg. , with negl igi bl e subsonic drag penalty . INTRODUCTION A review of research on the low-speed aerodynamics of highly swept wing configurations representative of supersonic-crui se aircraft designs indicates that a problem commonly observed is the so-cal led 'pitch-up' , i.e., a discontinuous nose-up change in the pitching moment uith increasing angle of attack. Pitch-up is caused by the onset of separation in the wing tip regions while the flow inboard is still attached, and has been of sufficient concern to dictate a comproniize in the optimum supersonic-crui se planform shape in order to have accept- able low-speed flight characteristics.
    [Show full text]
  • Singer of the Hollies and Marks An- Thews.Melissa'ssoulfulversion Should Down Home Funkisstillvery Much a Other Change of Pace for Havens
    DEDICATED TO THE NEEDS OF THE MUSIC 'RECORD I SINGLES SLEEPERS ALBUMS BOZ SCAGGS, "LIDO SHUFFLE" (prod. by Joe THIN .LIZZY, "DON'T BELIEVE A WORD" (prod. NATALIE COLE, "UNPREDICTABLE."It Wissert)(writers: B.Scaggs & D. by John Alcock)(writer:P.Lynott) is rare that an artist "arrives" on the Paich) (Boz Scaggs/Hudmar, ASCAP) (RSO/Chappell, ASCAP) (2:18). The scene, estabiishes herself with a first (3:40). One of the best tracks from closest that the group has come to release and :mmediately takes a place Scaggs' much acclaimed "Silk De- the infectious,rockingbadboy among the giants of popdom with every grees" album, this one seems the sound of "The Boys Are BackIn indicatio' being that's where she'll re- most likely contender to follow in Town," this "Johnny The Fox" track main for many years. Such has been.thie' thesuccessfulfootstepsof"Low- has already charted in the U.K. Be- case for Ms. Cole, whose remarkable down." Scaggs' easy going vocal lieveit: the boys are back to stay. growth continues unabated with yet a blazes the way. Columbia 3 10491. Mercury 73892. third Ip. Capitol SO -11600 (6.98). DAVID BOWIE, "SOUND AND VISION" (prod. GENESIS, "YOUR OWN SPECIAL WAY" (prod. JETHRO7JIi.L, "SONGS FROM THE )114K)1.1 -,P - by David Bowie & Tony Visconti) by David Hentschel & Genesis) WOOD." .::te tour of smaller halls re- (writers: David Bowie) (Bewlay Bros./ (writer: Michael Rutherford) (Warner cently completed by Tull has put the Fleur, BMI) (3:00). "The man who Bros., ASCAP) (3:03). The group is group in the proper frame of reference fell to earth" is still one step ahead currently enjoying its biggest album for this latest set.
    [Show full text]
  • Mp-Avt-146-29
    UNCLASSIFIED/UNLIMITED Meeting Unmanned Air Vehicle Platform Challenges Using Oblique Wing Aircraft Dr. R.K. Nangia BSc, PhD, CEng, AFAIAA, FRAeS Consulting Engineers Nangia Aero Research Associates WestPoint, 78-Queens Road, BRISTOL, BS8 1QX UK [email protected] ABSTRACT There is an ever increasing emphasis on unmanned vehicles for all kinds of roles. Recent experience suggests that their capability and payoff could be complementary to manned vehicles in combat situations. However, the levels of platform and inter-disciplinary technologies need to be developed to take full advantage of their performance potential as part of an integrated defence system. This applies to all classes of Unmanned vehicles. Further, a balance has to be struck between manoeuvrability, stealth and enhancing range (persistence) whilst possibly combining reconnaissance and strike roles. A level of autonomy is implied (push button capability). Innovation and system integration is therefore called for. Future aircraft, particularly unmanned aircraft, will have substantially "widened" flight envelopes (higher "g", AoA and ß over wider Mach, altitude and CL ranges). An in depth analysis of aircraft weight breakdown (structure, fuel and payload) and the trends with time, size and technology levels, together with consideration and adaptation of the Breguet Range Equation has enabled derivation of Efficiency parameters leading to an appreciation of technologies needed for innovation and for further development. The paper focuses on the Oblique Flying Wing (OFW) concept to meet the goals of enhancing Range, Persistence whilst combining roles of Reconnaissance, Sensing and Strike. Several developing technologies, e.g. control, guidance and structure have prompted a “re-visit” to OFW.
    [Show full text]
  • The Power for Flight: NASA's Contributions To
    The Power Power The forFlight NASA’s Contributions to Aircraft Propulsion for for Flight Jeremy R. Kinney ThePower for NASA’s Contributions to Aircraft Propulsion Flight Jeremy R. Kinney Library of Congress Cataloging-in-Publication Data Names: Kinney, Jeremy R., author. Title: The power for flight : NASA’s contributions to aircraft propulsion / Jeremy R. Kinney. Description: Washington, DC : National Aeronautics and Space Administration, [2017] | Includes bibliographical references and index. Identifiers: LCCN 2017027182 (print) | LCCN 2017028761 (ebook) | ISBN 9781626830387 (Epub) | ISBN 9781626830370 (hardcover) ) | ISBN 9781626830394 (softcover) Subjects: LCSH: United States. National Aeronautics and Space Administration– Research–History. | Airplanes–Jet propulsion–Research–United States– History. | Airplanes–Motors–Research–United States–History. Classification: LCC TL521.312 (ebook) | LCC TL521.312 .K47 2017 (print) | DDC 629.134/35072073–dc23 LC record available at https://lccn.loc.gov/2017027182 Copyright © 2017 by the National Aeronautics and Space Administration. The opinions expressed in this volume are those of the authors and do not necessarily reflect the official positions of the United States Government or of the National Aeronautics and Space Administration. This publication is available as a free download at http://www.nasa.gov/ebooks National Aeronautics and Space Administration Washington, DC Table of Contents Dedication v Acknowledgments vi Foreword vii Chapter 1: The NACA and Aircraft Propulsion, 1915–1958.................................1 Chapter 2: NASA Gets to Work, 1958–1975 ..................................................... 49 Chapter 3: The Shift Toward Commercial Aviation, 1966–1975 ...................... 73 Chapter 4: The Quest for Propulsive Efficiency, 1976–1989 ......................... 103 Chapter 5: Propulsion Control Enters the Computer Era, 1976–1998 ........... 139 Chapter 6: Transiting to a New Century, 1990–2008 ....................................
    [Show full text]
  • Introduction to Aircraft Stability and Control Course Notes for M&AE 5070
    Introduction to Aircraft Stability and Control Course Notes for M&AE 5070 David A. Caughey Sibley School of Mechanical & Aerospace Engineering Cornell University Ithaca, New York 14853-7501 2011 2 Contents 1 Introduction to Flight Dynamics 1 1.1 Introduction....................................... 1 1.2 Nomenclature........................................ 3 1.2.1 Implications of Vehicle Symmetry . 4 1.2.2 AerodynamicControls .............................. 5 1.2.3 Force and Moment Coefficients . 5 1.2.4 Atmospheric Properties . 6 2 Aerodynamic Background 11 2.1 Introduction....................................... 11 2.2 Lifting surface geometry and nomenclature . 12 2.2.1 Geometric properties of trapezoidal wings . 13 2.3 Aerodynamic properties of airfoils . ..... 14 2.4 Aerodynamic properties of finite wings . 17 2.5 Fuselage contribution to pitch stiffness . 19 2.6 Wing-tail interference . 20 2.7 ControlSurfaces ..................................... 20 3 Static Longitudinal Stability and Control 25 3.1 ControlFixedStability.............................. ..... 25 v vi CONTENTS 3.2 Static Longitudinal Control . 28 3.2.1 Longitudinal Maneuvers – the Pull-up . 29 3.3 Control Surface Hinge Moments . 33 3.3.1 Control Surface Hinge Moments . 33 3.3.2 Control free Neutral Point . 35 3.3.3 TrimTabs...................................... 36 3.3.4 ControlForceforTrim. 37 3.3.5 Control-force for Maneuver . 39 3.4 Forward and Aft Limits of C.G. Position . ......... 41 4 Dynamical Equations for Flight Vehicles 45 4.1 BasicEquationsofMotion. ..... 45 4.1.1 ForceEquations .................................. 46 4.1.2 MomentEquations................................. 49 4.2 Linearized Equations of Motion . 50 4.3 Representation of Aerodynamic Forces and Moments . 52 4.3.1 Longitudinal Stability Derivatives . 54 4.3.2 Lateral/Directional Stability Derivatives .
    [Show full text]