Uncle Ethan's Wood Pellet Fuel Brochure

Total Page:16

File Type:pdf, Size:1020Kb

Uncle Ethan's Wood Pellet Fuel Brochure ® ® PREMIUMFrequently Asked WQuestionsOOD PREMIUM WOOD What are Uncle Ethan’s products made of? UnclePRODUCTS Ethan’s products are made of 100% recycled wood fiber. They are bonded with PRODUCTS naturally occurring lignin in the wood fiber. No additional wax or other artificial binders are ever used. Do they smell like chemicals? Uncle Ethan’s products only contain wood, so they smell like burning firewood. They never create a chemical odor, unlike other brands. How do I store my wood products? Because no artificial binders are used, Uncle Ethan’s wood products can be susceptible to moisture. Be sure to store your pellet fuel in a dry place. Uncle Ethan’s Pellet Fuel is a great choice for those who value nature and the responsible use of its resources. Visit UncleEthans.com for more information. s greatest pleasures life’ E Printed on paper containing 100% post-consumer recycled waste Co m e f r o m n at u r ©2011 Universal Forest Products, Inc. All rights reserved. Grand Rapids, MI 49525 Uncle Ethan’s is a trademark of UFP Eastern Division, Inc. HPBA and its logo are registered trademarks of the Patio & Barbecue Association, Inc. Uncle Ethan The characters portrayed or events described in this brochure are purely fictitious. Any resemblance to real persons is coincidental. 6704_8/11 All-Natural. No added chemicals. 100% renewable. Wood fires, the way nature intended. All-Natural Premium Wood Pellet Fuel Uncle Ethan’s pellet fuel is manufactured using only the best quality wood fiber avail- able. State-of-the-art production equipment ensures consistent low moisture, resulting in better compression. W hether it’s to cook a meal or heat a home, And when combined with screening to remove building fires is one of the most useful and unwanted fines, you get a premium pellet fuel basic things we do. And for the longest time, that will often improve a stove’s performance. wood fires were also totally natural. But that changed with man-made fuel pellets, since • Perfect for use in residential and many brands are loaded with chemicals that commercial pellet stoves. emit excessive CO2 and other harmful sub- • Bonded naturally with no added stances when burned. chemicals or artificial binders. They Uncle Ethan’s products are different. won’t emit Made from 100% all-natural wood fiber, a chemical they contain no added chemicals or artificial odor. binders, yet work great. With Uncle Ethan’s, you can now enjoy the added convenience • Zero carbon of manufactured pellet fuel—but with less footprint— ash, smoke and creosote, making sure your PRODUCTS produces fewer next fire is healthier for you and for the greenhouse environment. gases and reduces reliance PREMIUM on fossil fuels. • Meets or exceeds Better than cordwood. the standards for • Produces lessW ash, smoke and creosote premium grade O OD wood pellets set • Burns hotter, cleaner and longer forth by the Pellet • Pest-free Fuel Institute. ®.
Recommended publications
  • Buying & Storing Firewood & Pellets
    Wood Energy Series Fact Sheet FS-937 Buying & Storing Firewood & Pellets 2012 Whether you buy or cut your own firewood, chances are Firewood that you still have plenty left to learn. Even people who have been heating with wood for decades often say “I Firewood dealers come in all shapes and sizes, and wish I knew that years ago!” after reading tips like the although they may appear to be established or ones contained here. questionable, that does not necessarily mean you will be dealt a good or bad hand. Every year, hundreds of thousands of Americans are sold substandard cord wood. This sheet will help you avoid Before You Buy getting a raw deal next time you buy firewood. Find a dealer with a good reputation. Check with friends, the Better Business Bureau, or an online rating site such And if you heat with pellets, there are new developments as www.checkbook.org. Ask for references. you should know that will impact the fuel you buy. Ask the dealer what the moisture content of the wood is Heating Fuel Cost Comparison and how long it has been since it’s been split, not since Prices vary, but you can get an idea of what it will cost it’s been felled. When the tree was cut is not nearly as you to use different fuels by looking at the table below. important as when it was split, since seasoning really The fuel cost per heating season was calculated for a begins after splitting. 2,000 square foot home in Maryland using this heating Ask what size truck the dealer delivers in and if it’s truly calculator: www.eia.gov/neic/experts/heatcalc.xls.
    [Show full text]
  • Developing a Wood Pellet/ Densified Biomass Industry in Washington State: Opportunities and Challenges
    Developing a Wood Pellet/ Densified Biomass Industry in Washington State: Opportunities and Challenges A Report to the Washington State Legislature December 2012 Page 1 Densified biomass: Part of Washington’s energy solution The Washington State University (WSU) Energy Program was directed by the Washington State Legislature [3ESHB-2127, section 603 (8)] to conduct a study of densified biomass as a renew- able fuel for heating homes, businesses and other facilities in our state. This report to Governor Chris Gregoire and the Legislature presents a summary of the WSU Energy Program’s densified biomass study findings. What is densified biomass? Washington’s pellet mill industry has shrunk by Raw biomass materials, such as forest slash and one-third in recent years, primarily due to the construction waste, are irregular in shape, low facilities’ debt loads. in energy density, greatly affected by moisture, • In 2009, three mills – located in Omak, and can be difficult to transport. Shelton and Tacoma – had a combined capacity of 180,000 tons per year. Another Biomass densification solves these problems by mill in Skagit County was in the permitting compressing sawdust and chipped wood to process, but never opened. create solid biofuel pellets that provide consis- • By 2012, the state had only two operating tent quality, low moisture content, high energy mills – Olympus Pellets in Shelton and density and homogenous size and shape. Manke in Tacoma – with a combined Densification increases the energy density of capacity of 160,000 tons per year. biomass by approximately 10 to 15 percent, so more heat is produced per unit of pellets This report provides insights to reinvigorate burned than if the same amount of raw wood the densified biomass/wood pellet industry in was burned.
    [Show full text]
  • Cross Laminated Timber As Sustainable Construction Technology for the Future
    Tommaso Scalet Cross Laminated Timber as Sustainable Construction Technology for the Future Helsinki Metropolia University of Applied Sciences Degree in Civil Engineering Degree Programme of Sustainable Building Engineering Thesis 18 December 2015 Abstract Author Tommaso Scalet Title Cross Laminated Timber as Sustainable Construction Technology for the Future Number of Pages 34 pages Date 18 December 2015 Degree Bachelor in Engineering Degree Programme Civil Engineering Specialisation option Sustainable Building Engineering Instructors Eric Pollock, Senior Lecturer Albino Angeli, General Manager of Xlam Dolomiti S.r.l. The purpose of this final year project was to investigate and analyse the sustainability per- formances of cross laminated timber (CLT) construction technology. First the availability of the raw material (timber) was studied comparing the systems of Northern Italy and Finland. Second, the manufacturing process and application of CLT in construction was compared to other traditional construction systems. A central part of the study was the environmental impact of the adhesive used in the production, with a special focus on the emissions in the production, application and disposal phases. Further studies were conducted on how to treat CLT waste material and how to improve and optimize the manufacturing process to reach a complete sustainability of the product. For the Bachelor‟s thesis, the disposal of the timber and wood adhesive in CLT were stud- ied. With the support of the collected data, it was possible to propose four technical solu- tions to the problem of the disposal of waste come from the CLT. It was concluded that CLT can be advertised as a completely sustainable material for construction.
    [Show full text]
  • Made Even Better
    MADE EVEN BETTER Niagara’s sawmill in Invercargill, New Zealand spans more than 20 hectares, the site employs over 100 staff at the sawmill, office, kilns, treatment and finger jointing plants. Niagara’s Ashburton plant uses timber from the sawmill to manufacture a superior range of building and finishing products. Ashburton • Niagara’s sawmill and remanufacture plant is ideally located at Kennington, seven kilometres north of New Zealand’s southern-most city, Invercargill. Invercargill • Niagara Truss & Frame and Parklands Firewood & Landscaping Supplies are both located in Invercargill. 4 History 5 Timber source 6 Sawmilling 8 Kiln drying 10 Quality control 12 Remanufacturing 14 Ashburton plant 16 Timber grades 17 Bark, chip, sawdust and briquettes 18 Niagara Truss & Frame 19 Parklands Firewood & Landscaping Mid 50’s forklift at the original Niagara sawmill Carting timber - early 40’s Generations of timber Originally established in the small Southland country settlement of Niagara, the company, which has been wholly owned by the Richardson family since 1954, has graduated from three sawmills to its present site at Kennington on the outskirts of Invercargill. Providing quality timber is their lifeblood and they have expertise, experience and a belief that their product, like the tall forest, will stand the test of time. Ensuring they utilise each tree to maximum capacity means they provide a full spectrum of products, from milled timber through to precision building products and everything in between, including bark, chip, sawdust, firewood
    [Show full text]
  • Wood Pellets Thesis
    The Feasibility of a Wood Pellet Plant Using Alternate Sources of Wood Fibre Garrett Blom WOOD 493 A Report Submitted in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science in Wood Products Processing In The Faculty of Forestry April 21st 2009 Abstract: This Thesis will evaluate the feasibility of building and operating a pellet plant in interior British Columbia. This thesis will examine the economic demand for wood pellets in different regions of the world. It will also identify the current Canadian supply and production of wood pellets. The thesis considers the capital costs associated with the building of a pellet plant as well as the machine capital costs. The variable costs associated with a pellet plant are examined in this thesis, with an emphasis on the costs associated with obtaining different wood fibre sources. Transportation and drying costs are also taken into consideration with regards to variable costs. In the analysis of data five different scenarios are calculated to identify the feasibility of using different fibre sources to operate a pellet plant. Recommendations based from these scenarios demonstrate the feasibility of operating and building a pellet plant in interior British Columbia. Page | ii Table of Contents: Title Page i Letter of Transmittal ii Abstract iii Table of Contents iv List of Tables vi List of Figures vii 1 INTRODUCTION 1 1.0 Problem Statement 1 1.1 Biomass Energy 1 1.2 Environmental Benefits 1 2 THE PRODUCTION OF WOOD PELLETS 3 2.1 Environmental Fibre Options 3 2.2 Energy
    [Show full text]
  • FSA1091 Basics of Heating with Firewood
    DIVISION OF AGRICULTURE RESEARCH & EXTENSION Agriculture and Natural Resources University of Arkansas System FSA1091 Basics of Heating with Firewood Sammy Sadaka Introduction Many options of secure, wood combustion Ph.D., P.E. stoves, freplaces, furnaces and boilers Associate Professor Wood heating was the predominant are available in the market. EPA certifed freplaces, furnaces and wood stoves with Extension Engineer means for heating in homes and businesses for several decades until the advent of no visible smoke and 90 percent less iron radiators, forced air furnaces and pollution are among alternatives. Addi- John W. Magugu, Ph.D. improved stoves. More recently, a census tionally, wood fuel users should adhere Professional Assistant by Energy Information Administration, to sustainable wood management and EIA, has placed fuelwood users in the environmental sustainability frameworks. USA at 2.5 million as of 2012. Burning wood has been more common Despite the widespread use of cen- among rural families compared to families tral heating systems, many Arkansans within urban jurisdictions. Burning wood still have freplaces in their homes, with has been further incentivized by more many others actively using wood heating extended utility (power) outages caused systems. A considerable number of by wind, ice and snowstorms. Furthermore, Arkansans tend to depend on wood fuel liquefed petroleum gas, their alternative as a primary source of heating due to fuel, has seen price increases over recent high-energy costs, the existence of high- years. effciency heating apparatuses and Numerous consumers continue to have extended power outages in rural areas. questions related to the use of frewood. An Apart from the usual open freplaces, important question is what type of wood more effcient wood stoves, freplace can be burned for frewood? How to store inserts and furnaces have emerged.
    [Show full text]
  • Biomass Energy in Pennsylvania: Implications for Air Quality, Carbon Emissions, and Forests
    RESEARCH REPORT Biomass Energy in Pennsylvania: Implications for Air Quality, Carbon Emissions, and Forests Prepared for: Prepared by: December 2012 The Heinz Partnership for Endowments Public Integrity Pittsburgh, PA by Mary S. Booth, PhD The Biomass Energy in Pennsylvania study was conducted by Mary S. Booth, PhD, of the Partnership for TABLE OF CONTENTS Policy Integrity. It was funded by the Heinz 4 Executive Summary Endowments. 4 Central findings 8 Recommendations 10 Chapter 1: Biomass Energy — The National Context 11 The emerging biomass power industry 11 Cumulative demand for “energy wood” nationally 14 Chapter 2: Carbon Emissions from Biomass Power 15 The Manomet Study 18 Chapter 3: Pollutant Emissions from Biomass Combustion 19 Particulate matter 20 Particulate matter emissions from small boilers 20 Use of pellets to reduce emissions and the carbon dilemma 22 Particulate matter controls for large boilers 22 Controls for other pollutants 24 Chapter 4: Biomass Combustion Impacts on Human Health 25 Special characteristics of biomass emissions 26 Diesel emissions from biomass harvesting and transport 27 Chapter 5: Policy Drivers for Biomass Power in Pennsylvania 28 Bioenergy in Pennsylvania’s Alternative Energy Portfolio Standard 29 Pennsylvania’s Climate Action Plan 30 Blue Ribbon Task Force on the low-use wood resource 31 Financial incentives for biomass and pellet facilities 31 Pennsylvania’s “Fuels for Schools and Beyond” program 32 Penn State University’s Biomass Energy Center 33 Chapter 6: Biomass Supply and Harvesting in Pennsylvania
    [Show full text]
  • Harvesting Firewood from Your Woods
    Harvesting Firewood from Your Woods TOPICS: n Tree and Forest Biology (page 2) Basic concepts about how trees grow and the characteristics that make trees good or bad for firewood n Planning a Harvest (page 8) Which trees to cut for firewood and how to cut them safely n Processing Trees into Firewood ( p age 14) Techniques for splitting, drying and stacking wood Tree & Forest Biology Cutting trees for firewood requires careful management. The management decisions you make can either improve or harm the long-term health and productivity of your woodlands. Understanding how and where trees grow can aid your deci- sions about which trees to cut, and will lead to improvements in the overall health of your woodlands. Trees have several basic requirements for long-term survival: nutrients, space, water and sunlight. The competition for these resources will determine how well a tree grows and how long it will survive. Tree roots are responsible for the uptake of water and nutrients. The quality and quantity of these nutrients vary depending on the soil. Different trees are adapted to the dif- ferent soil types, from sand to clay. Clay and loam soils hold water and nutrients better than sandy soils. That means trees growing on sandy soils need to be able to grow in low nutrient and low moisture conditions. Each soil type can only support a limited number of trees, based on their size. Trees become stressed when there is too much competition for water and nutrients. To keep your forest healthy, some trees should be removed to make room for others to grow.
    [Show full text]
  • Log Holder This Sturdy Log Holder Makes Stacking Easier and Keeps Your Firewood Organized and Off the Ground
    STACK LOGS NEAT AND CLEAN TM Log Holder This sturdy log holder makes stacking easier and keeps your firewood organized and off the ground. Use 2x4 preservative-treated lumber with Simpson Strong-Tie® Rigid Tie® RTC2Z connectors to build this log holder any size you need in less than an hour. Check out our installation and building tip videos at diydoneright.com. TOOLS YOU NEED • Saw • Screw gun • ¼" hex head socket • Tape measure • Clamps 2x4 LUMBER • Framing square Length can vary as needed Connectors are easy to install and strong enough to support even the heaviest loads. RIGID TIE® RTC2Z CONNECTOR INSTALLATION INSTRUCTIONS 1. CUT LUMBER TO SIZE. Since all of your cuts are straight cuts, Simpson Strong-Tie® connectors simplify building with wood. 2. INSTALL CONNECTOR ON VERTICAL POST. Mark height, clamp connector to post and attach with #9x1½" Strong-Drive® SD Connector screws. 3. CONNECT HORIZONTAL RAIL 2x4 LUMBER ON EACH SIDE. Width and height can Use a clamp to vary as needed help hold the wood in the ® seat of the con- Attach Rigid Tie RTC2Z nector during connectors with #9x1½" SD Connector screws installation. For more inspiration, visit diydoneright.com © 2017 Simpson Strong-Tie Company Inc. DIY-CSLGHLDR17 MATERIALS AND CUTTING DIAGRAM TM Log Holder FRONT VIEW SIDE VIEW 30" 47" 8" 50" 15" FOR THIS PROJECT YOU WILL NEED: LUMBER SIMPSON STRONG-TIE® CONNECTORS* FASTENERS (3) – pieces of 2x4 8 ft. lumber (4) – Rigid Tie® RTC2Z connectors (1) – BOX Simpson Strong-Tie® #9x1½" Strong-Drive® SD Connector screws CUT FROM 2x4 x 8' LUMBER (2) – 47" RAILS 47" 47" (1x) (3) – 30" CORNER POSTS 30" 30" 30" (1x) (2) – 8" ENDRAILS & (1) 30" CORNER POST 30" 8" 8" (1x) Use 2x4 8 ft.
    [Show full text]
  • Heating with Firewood
    Stewardship Notes Indiana Division of Forestry Heating With Firewood Heating costs seem to rise each year with the ever-increasing demand on our nations' energy sources. Many have found wood is an excellent asset in offsetting yearly heating costs. A warm, glowing fire can be a practical complement to any central heating system and can go a long way toward aiding the pocketbook. Unlike most energy sources, wood is a renewable fuel source. New trees are continually growing. For many people, wood has the advantage of being readily available, easily cut and relatively inexpensive. However, when fuels are burned, pollutants are created; wood is no exception. The EPA has found wood burned for home heating is a leading cause of air pollution in many western cities. Wood stoves sold after July 1, 1988 must meet certain air quality standards. Secondary burning chambers and catalytic combustors are two methods being used by manufacturers to reduce pollutants. Proper stove operation is important to maintain the low emission capabilities of new stoves. The Best Kinds of Firewood Certain species of wood produce more heat than others. The heat a log produces depends on the density, moisture content, resin and ash in the wood. The chart to the right shows the densities and heat values of various tree species common in Indiana. The heat value of hickory is set at 100. The chart lists those woods that burn longest at the top of the list, while those toward the bottom will ignite and burn more quickly. When low-density woods are mixed with high-density woods, the fire will start quickly and burn a long time.
    [Show full text]
  • Pelletization of Refuse-Derived Fuel with Varying Compositions of Plastic, Paper, Organic and Wood
    sustainability Article Pelletization of Refuse-Derived Fuel with Varying Compositions of Plastic, Paper, Organic and Wood Hamid Rezaei 1,* , Fahimeh Yazdan Panah 1, C. Jim Lim 1 and Shahab Sokhansanj 1,2 1 Chemical and Biological Engineering Department, University of British Columbia, Vancouver, BC V6T 1Z3, Canada; [email protected] (F.Y.P.); [email protected] (C.J.L.); [email protected] (S.S.) 2 Chemical and Biological Engineering Department, University of Saskatchewan, Saskatoon, SK 3B48, Canada * Correspondence: [email protected] Received: 26 May 2020; Accepted: 4 June 2020; Published: 6 June 2020 Abstract: The combustible fraction of municipal solid waste (MSW) is called refuse-derived fuel (RDF). RDF is a blend of heterogeneous materials and thus its handling is challenging. Pelletization is an efficient treatment to minimize the heterogeneity. In this research, typical RDF compositions were prepared by mixing several mass fractions of paper, plastic, household organic and wood. The collected compositions were ground, wetted to 20% moisture content (wet basis) and pelletized. Increasing the plastic content from 20% to 40% reduced the pelletization energy but increased the pellet’s calorific value. Pellets with higher plastic content generated more dust when exposed to shaking. Making durable pellets with 40% plastic content needed an increase in die temperature from 80 ◦C to 100 ◦C. Increasing the paper content from 30% to 50% increased the durability but consumed higher energy to form pellets. Paper particles increased the friction between pellet’s surface and die wall as was evident from expulsion energy. Force versus displacement curve for material compression revealed that the RDF compositions have rigid material characteristics.
    [Show full text]
  • E0021 Wood Pellets, an Introduction to Their Production And
    Wood Pellets An Introduction to their Production and Use David Jones Mississippi State University David Harper & Adam Taylor University of Tennessee What’s Inside… Page 2 Advantages of Wood Pellets Green, clean, and convenient Introduction Page 3 How Pellets Are Made Turning wood waste into Wood pellets are compressed wood particles that are used as premium fuel fuel. Pellets are already commonly used in some areas of the country, and in other areas they are growing in popularity as Page 4 How Pellets Are Used primary fuel costs increase and concerns about global climate From home heating to change build. industrial boilers This fact sheet is a short introduction to wood pellets and will Page 4 Markets for Pellets be helpful to those who are interested in using or producing Heating up! wood pellet fuel. The advantages of wood pellets are discussed, as well as how pellets are made and used. Wood Pellet Stoves Wood pellet stoves are very efficient and are capable of capturing almost 95 percent of the heat produced from burning the pellets. 1 Wood Pellets: An Introduction Advantages of Wood Pellets Because wood pellets are made from wood, they have the same advantages as wood: local, abundant, renewable, and low-cost. In addition, wood pellets are Both systems require little when wood is burned was very low in moisture (water) and maintenance because the captured from the atmosphere ash content, so they burn hot pellets burn so cleanly. when the wood was grown in and cleanly. Fuel pellets are the tree. This is an important Pellets have a number of limited to 1 percent (premium- advantage, especially in some “environment-friendly” grade) to 3 percent (standard) countries in Europe where attributes.
    [Show full text]