Reinforced Plastic Composites Production
Total Page:16
File Type:pdf, Size:1020Kb
Docket No. A-94-52 Subcategory II-A EPA Studies or Contractor Reports Document No. Description II-A-1 U.S. Environmental Protection Agency, Compilation of Air Pollutant Emission Factors. 1991 AP-42. U.S. Environmental Protection Agency, Research Triangle Park, North Carolina. pp. 4.12.1-4.12.10. II-A-2 U.S. Environmental Protection Agency, Locating and Estimating Air Emissions from Sources of Styrene, Interim Report. Office of Air Quality Planning and Standards, Research Triangle Park, North Carolina. EPA-450/4-91-029. October 1991. II-A-3 Determination of Styrene Emissions from the Cultured Marble and Sink Manufacturing Industry at General Marble Lincolnton, NC. Final Report. Radian Corporation. Prepared for the U.S. Environmental Protection Agency. June 1992. II-A-4 Evaluation of the Polyad FB Air Purification and Solvent Recovery Process for Styrene Removal. Southern Research Institute. Prepared for the U.S. Environmental Protection Agency. EPA-600/R-93-212. November 1993 Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Date Rcvd Commentor, Addressee, Title Date of Number in Docket or Description, etc. Document II-A-5 Draft Report: Preliminary Emissions Testing at January 30, 1995 Dow Chemical on January 4-5, 1995. Research Triangle Institute in cooperation with the Air and Energy Engineering Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards in Research Triangle Park, North Carolina. 28 pp. II-A-6 Assessment of Styrene Emission Controls for September 1996 FRP/C and Boat Building Industries. Final Report. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards in Research Triangle Park, North Carolina. EPA-600/R-96-109. 133 pp. II-A-7 Addendum to Assessment of Styrene Emission November 1996 Controls for FRP/C and Boat Building Industries. Final Report. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards in Research Triangle Park, North Carolina. Addendum is EPA-600/R-96-136. 56 pp. II-A-8 Evaluation of Styrene Emissions from a Shower November 1996 Stall/Bathtub Manufacturing Facility. Southern Research Institute in cooperation with the Air and Energy Engineering Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Research and Development in Washington, DC. EPA-600/R-96-138. 64 pp. Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Date Rcvd Commentor, Addressee, Title Date of Number in Docket or Description, etc. Document II-A-9 Evaluation of Pollution Prevention Techniques to March 1997 Reduce Styrene Emissions from Open Contact Molding Processes. Volume 1, Final Report. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Research and Development in Washington, DC EPA-600/R-97-018a. 74 pp. II-A-10 Evaluation of Pollution Prevention Techniques to March 1997 Reduce Styrene Emissions from Open Contact Molding Processes. Volume II, Appendixes. Research Triangle Institute in cooperation with the National Risk Management Research Laboratory. Prepared for the U.S. Environmental Protection Agency, Office of Research and Development in Washington, DC EPA-600/R-97-018b. 151 pp. Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Date Rcvd Commentor, Addressee, Title Date of Number in Docket or Description, etc. Document II-A-11 EPA Office of Compliance Sector Notebook September 1995 Project: Profile of the Rubber and Plastics Industry. U.S. Environmental Protection Agency, Office of Enforcement and Compliance Assurance. EPA/310-R-95-016. Washington, DC. 1995. 151 pp. II-A-12 Air Emissions form Reinforced Plastics Composite August 1999 Manufacturing Process. LASCO Panel Products: Volume I. Prepared for the U.S. Environmental Protection Agency. Office of Air Quality Planning and Standards. EPA-454/R-99-024a. II-A-13 Air Emissions from Reinforced Plastics Composite August 1999 Manufacturing Process. LASCO Panel Products: Volume II. Prepared for the U.S. Environmental Protection Agency. Office of Air Quality Planning and Standards. EPA-454/R-99-024b. II-A-14 Air Emissions from Reinforced Plastics Composite August 1999 Manufacturing Process. LASCO Panel Products: Volume III. Prepared for the U.S. Environmental Protection Agency. Office of Air Quality Planning and Standards. EPA-454/R-99-024c. Docket: A-94-52 Category: II-A EPA Studies or Contractor Reports Docket Date Rcvd Commentor, Addressee, Title Date of Number in Docket or Description, etc. Document II-A-15 Excel spreadsheet with file name August 2000 RPC_Market_Assign.xls This file contains the mapping of individual facilities to market segments. This data was used as inputs to the economic analysis. 1 diskette II-A-16 Excel spreadsheet with file name December 2000 PRODCOMP1.XLS. This file contains data on facility use of resin, gel coat, reinforcement, fillers, and additives. This data was used as inputs to the economic analysis. 1 diskette II-A-17 Economic Impact Analysis for Air Pollution May 2001 Regulations: Reinforced Plastics Industry. Prepared for U.S. environmental Protection Agency, Office of Air Quality Planning and Standards, Research Trangie Park, NC. II-A-18 Hazardous Air Pollutant Emissions for the May 2001 Production of Reinforced Plastic Composites. Background Information Document for Proposed Standards. Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda Document No. Description II-B-1 Report of plant visit to Eljer Plumbingware, Wilson, North Carolina, on June 16, 1993. II-B-2 Report of plant visits to VIATEC Hastings Engineered Systems in Hastings and Belding, Michigan, on July 14, 1993. II-B-3 Report of plant visit to Omega Pultrusions, Inc., Aurora, Ohio, on August 10, 1993. II-B-4 Report of plant visit to Xerxes Corporation, Avon, Ohio, on August 10, 1993. II-B-5 Report of plant visit to Premix, Inc., North Kingsville, Ohio, on August 11, 1993. II-B-6 Report of plant visit to Glastic Corporation, South Euclid, Ohio, on August 11, 1993. II-B-7 Report of plant visit to Picken's Plastics, Inc., Ashtabula, Ohio, on August 12, 1993. II-B-8 Report of plant visit to Molded Fiber Glass, Union City, Pennsylvania, on August 12, 1993. Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda Document Date Rcvd Commentor, Addressee, Title Date of Number in Docket or Description, etc. Document II-B-9 Report of plant visit to LASCO Bathware August 31, 1995 in South Boston, Virginia, on June 22, 1995. 29 pp. II-B-10 Report of plant visit to Sequentia Inc., in October 1, 1996 Grand Junction, Tennessee, on July 11, 1996. 1 p. Confidential business information located at CN-N404-9/ 96185-C18-05. 10 pp. 1 diskette. II-B-11 Report of plant visit to Enduro Plastics, in October 15, 1996 Fort Worth, Texas on July 9, 1996. 1 p. Confidential business information located at CN-N404-8/ 96185-C18-06. 16 pp. 1 diskette. II-B-12 Report of plant visit to Tecton Products, in December 17, Fargo, North Dakota, on 1996 June 4 and 5, 1996. 5 pp. II-B-13 Report of plant visit to Fibercast Co., in February 3, 1997 Sand Springs, Oklahoma, on July 10, 1996 and NESHAP Information for U.S. Environmental Protection Agency and Pacific Environmental Services. 159 pp. II-B-14 Report of plant visit to Cytec Industries, April 22, 1997 Inc., in Perrysburg, Ohio, on July 25, 1996. 23 pp. Confidential business information located at CN-N404-11/96185-C18-08. 30 pp. Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda Document Date Rcvd Commentor, Addressee, Title Date of Number in Docket or Description, etc. Document II-B-15 Report of plant visit to Core Materials August 5, 1997 Corp., (Navistar), in Columbus, Ohio on July 24, 1996. 41 p. Confidential business information is located at CN-N801-5/ 96185-C18-07. 39 pp. 1 diskette. II-B-16 Report of plant visit to LASCO Panel August 14, 1997 Products, in Florence, Kentucky, on September 11, 1996. 11 pp. Confidential business information located at CN-N504- 3/ CN-N801-2. 10 pp. II-B-17 Report of plant visit to Glasforms, Inc., in July 10, 1998 Birmingham, Alabama, on January 15, 1998. 131 pp. Confidential Business Information is located at CN-N801-12/ 98185-C18-02. 124 pp. 1 video tape, 1 cassette tape, 1 diskette and 31 photos. II-B-18 Greg LaFlam and Melanie Proctor, Pacific October 17, 1995 Environmental Services, to Madeleine Strum, U.S. Environmental Protection Agency. Industry Description Memorandum. II-B-19 Robert Lacovara, Composite Fabricators October 6, 1998 Association. CFA Phase I Hand Lay-up Emission Profile Data. cfahand.xls (Data File - 1 diskette) II-B-20 Robert Lacovara, Composite Fabricators October 6, 1998 Association. CFA Phase I Spray-up Emission Profile Data. cfapsray.xls (Data File - 1 diskette) Docket No. A-94-52 Subcategory II-B EPA Factual Memoranda Document Date Rcvd Commentor, Addressee, Title Date of Number in Docket or Description, etc. Document II-B-21 Keith Barnett, U.S. Environmental December 13, Protection Agency to Reinforced Plastics 1999 Composites Project File. Emission Test Data for Intermetro Industries Corporation for June 10, 1998 Emission Test. II-B-22 Kenneth R. Meardon, Pacific July 7, 2000 Environmental Services, Inc. to Keith Barnett, U.S. Environmental Protection Agency. Growth in the Reinforced Plastics Industries II-B-23 Kenneth R. Meardon, Pacific July 17, 2000 Environmental Services, Inc to Keith Barnett, U.S. Environmental Protection Agency.