DOCSLIB.ORG

GLOBAL COMBUSTION RESPONSES of PRACTICAL HYDROCARBON FUELS: N-HEPTANE, Iso-OCTANE, N-DECANE, N-DODECANE and ETHYLENE by KAMAL KU

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
GLOBAL COMBUSTION RESPONSES of PRACTICAL HYDROCARBON FUELS: N-HEPTANE, Iso-OCTANE, N-DECANE, N-DODECANE and ETHYLENE by KAMAL KU GLOBAL COMBUSTION RESPONSES OF PRACTICAL HYDROCARBON FUELS: n-HEPTANE, iso-OCTANE, n-DECANE, n-DODECANE AND ETHYLENE by KAMAL KUMAR Submitted in partial fulfillment of the requirements For the degree of Doctor of Philosophy Dissertation Adviser: Prof. Chih-Jen Sung Department of Mechanical and Aerospace Engineering CASE WESTERN RESERVE UNIVERSITY May, 2007 CASE WESTERN RESERVE UNIVERSITY SCHOOL OF GRADUATE STUDIES We hereby approve the dissertation of ______________________________________________________Kamal Kumar candidate for the Ph.D. degree *. C.J. Sung (signed)_______________________________________________ (chair of the committee) J. Iwan D. Alexander ________________________________________________ J.S. T'ien ________________________________________________ T.A. Zawodzinski ________________________________________________ ________________________________________________ ________________________________________________ (date) _______________________01/18/2007 *We also certify that written approval has been obtained for any proprietary material contained therein. Table of Contents List of Tables ................................................................................................................... vii List of Figures................................................................................................................. viii Acknowledgment............................................................................................................ xiv Abstract............................................................................................................................ xv Chapter 1 ........................................................................................................................... 1 Introduction................................................................................................................... 1 1.1 Background......................................................................................................... 1 1.2 Global Combustion Responses.......................................................................... 2 1.3 Objectives............................................................................................................ 4 1.4 Structure of Dissertation ................................................................................... 5 Chapter 2 ........................................................................................................................... 9 Experimental Specifications......................................................................................... 9 2.1 Flame Speed Measurements.............................................................................. 9 2.1.1 Counterflow Burner Apparatus ................................................................ 9 2.1.2 Fuel Vaporization and Premixing ........................................................... 11 2.1.3 DPIV Specifications .................................................................................. 14 2.1.4 Laminar Flame Speed Determination..................................................... 17 2.2 Extinction Stretch Rate Measurements.......................................................... 21 2.3 Ignition Delay Measurements ......................................................................... 22 iii Chapter 3 ......................................................................................................................... 34 Computational Specifications .................................................................................... 34 3.1 Laminar Flame Speed Computations............................................................. 34 3.2 Extinction Stretch Rate Computations .......................................................... 37 3.3 Ignition Delay Computations............................................................................... 41 Chapter 4 ......................................................................................................................... 44 Laminar Flame Speeds of Preheated iso-Octane/O2/N2 and n-Heptane/O2/N2 Mixtures....................................................................................................................... 44 4.1Scientific Background............................................................................................ 44 4.2 Experimental Results ....................................................................................... 47 4.2.1 Iso-Octane/O2/N2 ....................................................................................... 47 4.2.2 N-Heptane/O2/N2 ....................................................................................... 48 4.2.3 Comparison ............................................................................................... 49 4.2.4 Effect of Nitrogen Dilution....................................................................... 50 4.3 Sensitivity Analysis........................................................................................... 52 4.4 Concluding Remarks........................................................................................ 53 Chapter 5 ......................................................................................................................... 64 Laminar Flame Speeds and Extinction Limits of Preheated n-Decane/O2/N2 and n-Dodecane/O2/N2 Mixtures....................................................................................... 64 5.1 Scientific Background...................................................................................... 64 5.2 Experimental Results ....................................................................................... 67 5.2.1 Laminar Flame Speed Results ................................................................. 67 5.2.2 Overall Activation Energy Results.......................................................... 69 iv 5.2.3 Extinction Stretch Rate Results............................................................... 70 5.2.4 Flame Structure Response to Stretch Rate Variations.......................... 73 5.3 Sensitivity Analysis........................................................................................... 74 5.4 Concluding Remarks........................................................................................ 76 Chapter 6 ......................................................................................................................... 93 Laminar Flame Speeds and Ignition Delays for Ethylene/Oxidizer Mixtures ...... 93 6.1 Scientific Background...................................................................................... 93 6.2 Experimental and computational specifications............................................ 95 6.2.1 Determination of Laminar Flame Speed ................................................ 95 6.2.2 Determination of Ignition Delays ............................................................ 96 6.2.3 Kinetic Models........................................................................................... 96 6.3 Results and Discussions ................................................................................... 97 6.3.1 Laminar Flame Speeds............................................................................. 97 6.3.2 Ignition Delays......................................................................................... 101 6.4 Concluding Remarks...................................................................................... 106 Chapter 7 ....................................................................................................................... 121 Autoignition of n-Decane/Air Mixtures .................................................................. 121 7.1 Scientific Background.................................................................................... 121 7.2 Experimental and Computational Specifications........................................ 124 7.2.1 Determination of Ignition Delays .......................................................... 124 7.2.2 Kinetic Models......................................................................................... 125 7.3 Ignition Delay Results......................................................................................... 126 7.4 Concluding Remarks...................................................................................... 133 v Chapter 8 ....................................................................................................................... 152 Autoignition of Binary Fuel Blends involving n-Decane: Influence of Fuel Structure .................................................................................................................... 152 8.1 Scientific Background.................................................................................... 152 8.2 Experimental and Computational Specifications........................................ 154 8.2.1 Determination of Ignition Delays .......................................................... 154 8.3 Ignition Delay Results .................................................................................... 155 8.4 Practical Implications .................................................................................... 159 8.5 Concluding Remarks .......................................................................................... 161 Chapter 9 ......................................................................................................................
Load more

Recommended publications
  • Process Synthesis
    PROCESS SYNTHESIS DALE F. RUDD University of Wisconsin Madison, Wisconsin 53706 INTRODUCTION In the words of Webster, synthesis is "the proper way to approach process development. In combining of often diverse conceptions into a co­ these theories of process development, each syn­ herent whole" and analysis is "an examination thesis step defines an analysis problem the solu­ of a complex, its elements and their relations." tion of which provides data required for further Synthesis refers to the more inventive aspects of synthesis steps. Further, it became apparent that engineering and analysis to the more scientific. this organization of alternating synthesis and Both are required in the development of industrial analysis steps begs the development of educational processes. material for the early stages of engineering edu­ Since World War II engineering education has cation. moved strongly towards analysis, with the intro­ In this report we examine the development of duction of courses which analyse individual pro­ a first course in engineering in which synthesis cess operations and phenome,na. rransport phe­ and analysis are taught simultaneously. Elemen­ nomena, unit operations, process control, thermo­ tary new principles of process synthesis are com­ dynamics and other engineering science courses bined with the classic analysis techniques of greatly strengthened engineering education by material and energy balancing. Emphasis is on showing how things are and how they work. the development of process technology rather than Unfortunately, there was not a parallel de­ on the analysis of existing processes. velopment in the teaching of synthesis. The teach­ ing of how things ought to be rather than how RESEARCH IN PROCESS SYNTHESIS they are.
    [Show full text]
  • Chemistry Grade Span 9/10
    Chemistry Grade Span 9/10 Carbon and Carbon Compounds Subject Matter and Methodological Competencies • name the allotropes of carbon and use them to explain the relationship between its structure and properties • state the characteristics of the oxides of carbon • conduct experiments to o detect evidence of carbon dioxide o detect evidence of carbonates (using carbon dioxide detection) o describe the natural formation and decay processes of carbonates and hydrogen carbonates and use this to explain a simple model of the carbon cycle Natural Gas and Crude Oil Subject Matter and Methodological Competencies • identify natural gas, crude oil and coal as fossil fuels • explain the causes and consequences of increasing carbon dioxide concentrations in the atmosphere • discuss the economic and ecological consequences of the production and transport of natural gas and crude oil • apply knowledge of substance mixtures and substance separation using the example of fractional distillation of petroleum • describe the molecular structure of the gaseous alkanes using chemical formulas, structural formulas and simplified structural formulas • conduct experiments to o examine the flammability and solubility of selected alkanes o determine that water and carbon dioxide are the products of combustion o explain the relationship between the construction, properties and uses of important alkanes (e.g. methane - natural gas, propane and butane - liquid gas, octane - gasoline, decane - diesel, octadecane - paraffin candle wax) o explain the cohesion of alkane
    [Show full text]
  • Supercritical Pyrolysis of N-Decane Sean Bagley Louisiana State University and Agricultural and Mechanical College, [email protected]
    Louisiana State University LSU Digital Commons LSU Doctoral Dissertations Graduate School 2010 Supercritical Pyrolysis of n-Decane Sean Bagley Louisiana State University and Agricultural and Mechanical College, [email protected] Follow this and additional works at: https://digitalcommons.lsu.edu/gradschool_dissertations Part of the Chemical Engineering Commons Recommended Citation Bagley, Sean, "Supercritical Pyrolysis of n-Decane" (2010). LSU Doctoral Dissertations. 4000. https://digitalcommons.lsu.edu/gradschool_dissertations/4000 This Dissertation is brought to you for free and open access by the Graduate School at LSU Digital Commons. It has been accepted for inclusion in LSU Doctoral Dissertations by an authorized graduate school editor of LSU Digital Commons. For more information, please [email protected]. SUPERCRITICAL PYROLYSIS OF N-DECANE A Dissertation Submitted to the Graduate Faculty of the Louisiana State University Agricultural and Mechanical College in partial fulfillment of the requirements for the degree of Doctor of Philosophy in The Department of Chemical Engineering by Sean Bagley B.S., Louisiana State University, 2003 December 2010 Acknowledgements I gratefully acknowledge the Air Force Office of Scientific Research, for providing the necessary funding for this research. I would like to thank Dr. Arthur Lafleur and Ms. Elaine Plummer of the Massachusetts Institute of Technology and Dr. John Fetzer of Chevron Research for providing reference standards and/or UV spectra of polycyclic aromatic hydrocarbons to my professor. I would like to thank my professor, Dr. Judy Wornat, for her wisdom and patience. The members of my group, Elmer Ledesma, Jorge Oña, Shiju Thomas, Michelle Walker, Jerome Robles, Franz Ehrenhauser, and Nimesh Poddar, each of whom contributed to my project in innumerable ways.
    [Show full text]
  • Measurements of Higher Alkanes Using NO Chemical Ionization in PTR-Tof-MS
    Atmos. Chem. Phys., 20, 14123–14138, 2020 https://doi.org/10.5194/acp-20-14123-2020 © Author(s) 2020. This work is distributed under the Creative Commons Attribution 4.0 License. Measurements of higher alkanes using NOC chemical ionization in PTR-ToF-MS: important contributions of higher alkanes to secondary organic aerosols in China Chaomin Wang1,2, Bin Yuan1,2, Caihong Wu1,2, Sihang Wang1,2, Jipeng Qi1,2, Baolin Wang3, Zelong Wang1,2, Weiwei Hu4, Wei Chen4, Chenshuo Ye5, Wenjie Wang5, Yele Sun6, Chen Wang3, Shan Huang1,2, Wei Song4, Xinming Wang4, Suxia Yang1,2, Shenyang Zhang1,2, Wanyun Xu7, Nan Ma1,2, Zhanyi Zhang1,2, Bin Jiang1,2, Hang Su8, Yafang Cheng8, Xuemei Wang1,2, and Min Shao1,2 1Institute for Environmental and Climate Research, Jinan University, 511443 Guangzhou, China 2Guangdong-Hongkong-Macau Joint Laboratory of Collaborative Innovation for Environmental Quality, 511443 Guangzhou, China 3School of Environmental Science and Engineering, Qilu University of Technology (Shandong Academy of Sciences), 250353 Jinan, China 4State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou, China 5State Joint Key Laboratory of Environmental Simulation and Pollution Control, College of Environmental Sciences and Engineering, Peking University, 100871 Beijing, China 6State Key Laboratory of Atmospheric Boundary Physics and Atmospheric Chemistry, Institute of Atmospheric Physics, Chinese
    [Show full text]
  • Organic Nomenclature: Naming Organic Molecules
    Organic Nomenclature: Naming Organic Molecules Mild Vegetable Alkali Aerated Alkali What’s in a name? Tartarin Glauber's Alkahest Alkahest of Van Helmot Fixed Vegetable Alkali Russian Pot Ash Cendres Gravellees Alkali Mild Vegetable Oil of Tartar Pearl Ash Tartar Alkahest of Reapour K2CO3 Alkali of Reguline Caustic Sal Juniperi Potassium Carbonate Ash ood Alkali of Wine Lees Salt of Tachenius W Fixed Sal Tartari Sal Gentianae Alkali Salt German Ash Salt of Wormwood Cineres Clavellati Sal Guaiaci exSal Ligno Alkanus Vegetablis IUPAC Rules for naming organic molecules International Union of Pure and Applied Chemists 3 Name Molecular Prefix Formula Methane CH4 Meth Ethane C2H6 Eth Alkanes Propane C3H8 Prop Butane C4H10 But CnH2n+2 Pentane C5H12 Pent Hexane C6H14 Hex Heptane C7H16 Hept Octane C8H18 Oct Nonane C9H20 Non Decane C10H22 Dec 4 Structure of linear alkanes propane butane pentane hexane heptane octane nonane decane 5 Constitutional Isomers: molecules with same molecular formula but differ in the way in which the atoms are connected to each other 6 Physical properties of constiutional isomers 7 Isomers n # of isomers 1 1 2 1 The more carbons in a 3 1 molecule, the more 4 2 possible ways to put 5 3 them together. 6 5 7 9 8 18 9 35 10 75 15 4,347 25 36,797,588 8 Naming more complex molecules hexane C6H14 9 Naming more complex molecules Step 1: identify the longest continuous linear chain: this will be the root name: this is the root name 2 4 6 longest chain = 6 (hexane) 1 3 5 2 4 3 4 3 2 2 1 5 4 1 3 5 correct 1 incorrect longest chain = 5 (pentane) longest chain = 5 (pentane) 1 3 1 2 2 3 4 4 longest chain = 4 (butane) longest chain = 4 (butane) 10 Naming more complex molecules Step 2: identify all functional group (the groups not part of the “main chain”) CH3 2 4 4 3 2 1 5 1 3 5 CH3 main chain: pentane main chain: pentane CH3 1 3 1 2 2 3 4 4 CH3 CH3 CH3 main chain: butane main chain: butane 11 Alkyl groups: fragments of alkanes H H empty space (point where it H C H H C attaches to something else) H H methane methyl CH4 CH3 12 More generally..
    [Show full text]
  • Experimental Study of N-Decane Decomposition with Microsecond Pulsed Discharge Plasma
    Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 19 April 2017 doi:10.20944/preprints201704.0126.v1 Article Experimental Study of n-Decane Decomposition with Microsecond Pulsed Discharge Plasma Feilong Song 1, Di Jin 1, Min Jia 1, Wenwen Wei 2, Huimin Song 1 and Yun Wu 1,3,* 1 Science and Technology on Plasma Dynamics Laboratory, Airforce Engineering University, Xi’an 710038, China; [email protected] (F.S.); [email protected] (D.J.); [email protected] (M.J.); [email protected] (H.S.) 2 State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China; [email protected] (W.W.) 3 Science and Technology on Plasma Dynamics Laboratory, Xi’an Jiaotong University, Xi’an 710049, China; * Correspondence: [email protected]; Tel.: +0086-29-8478-7527 Abstract: A highly-integrated experimental system for plasma decomposition of fuels was built. Experiments were conducted and confirmed that macromolecular chain hydrocarbons were cracked by large-gap dielectric barrier discharge under the excitation of a microsecond-pulse power supply. Alkanes and olefins with a C atom number smaller than 10 as well as hydrogen were found in the cracked products of n-decane (n-C10H22). The combination of preheating and plasma decomposition had strong selectivity for olefins. Under strong discharge conditions, micromolecular olefins were found in the products. Moreover, there was a general tendency that micromolecular olefins gradually accounted for higher percentage of products at higher temperature and discharge frequency. Keywords: Plasma; DBD; decomposition; n-decane 1. Introduction The continuous rotating detonation engine (CRDE) has tremendous potential for improving the performances of aero-propellers [1-3].
    [Show full text]
  • Hydrocarbons, Bp 36°-216 °C 1500
    HYDROCARBONS, BP 36°-216 °C 1500 FORMULA: Table 1 MW: Table 1 CAS: Table 1 RTECS: Table 1 METHOD: 1500, Issue 3 EVALUATION: PARTIAL Issue 1: 15 August 1990 Issue 3: 15 March 2003 OSHA : Table 2 PROPERTIES: Table 1 NIOSH: Table 2 ACGIH: Table 2 COMPOUNDS: cyclohexane n-heptane n-octane (Synonyms in Table 1) cyclohexene n-hexane n-pentane n-decane methylcyclohexane n-undecane n-dodecane n-nonane SAMPLING MEASUREMENT SAMPLER: SOLID SORBENT TUBE [1] TECHNIQUE: GAS CHROMATOGRAPHY, FID [1] (coconut shell charcoal, 100 mg/50 mg) ANALYTE: Hydrocarbons listed above FLOW RATE: Table 3 DESORPTION: 1 mL CS2; stand 30 min VOL-MIN: Table 3 -MAX: Table 3 INJECTION VOLUME: 1 µL SHIPMENT: Routine TEMPERATURES SAMPLE -INJECTION: 250 °C STABILITY: 30 days @ 5 °C -DETECTOR: 300 °C -COLUMN: 35 °C (8 min) - 230 °C (1 min) BLANKS: 10% of samples ramp (7.5 °C /min) CARRIER GAS: Helium, 1 mL/min ACCURACY COLUMN: Capillary, fused silica, 30 m x 0.32-mm RANGE STUDIED: Table 3 ID; 3.00-µm film 100% dimethyl polysiloxane BIAS: Table 3 CALIBRATION: Solutions of analytes in CS2 Ö OVERALL PRECISION ( rT): Table 3 RANGE: Table 4 ACCURACY: Table 3 ESTIMATED LOD: Table 4 þ PRECISION ( r): Table 4 APPLICABILITY: This method may be used for simultaneous measurements; however, interactions between analytes may reduce breakthrough volumes and alter analyte recovery. INTERFERENCES: At high humidity, the breakthrough volumes may be reduced. Other volatile organic solvents such as alcohols, ketones, ethers, and halogenated hydrocarbons are potential interferences. OTHER METHODS: This method is an update for NMAM 1500 issued on August 15, 1994 [2] which was based on methods from the 2nd edition of the NIOSH Manual of Analytical Methods: S28, cyclohexane [3]; S82, cyclohexene [3]; S89, heptane [3]; S90, hexane [3]; S94, methylcyclohexane [3]; S378, octane [4]; and S379, pentane [4].
    [Show full text]
  • Section 2. Hazards Identification OSHA/HCS Status : This Material Is Considered Hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
    SAFETY DATA SHEET Flammable Liquefied Gas Mixture: 2-Methylpentane / 2,2-Dimethylbutane / 2, 3-Dimethylbutane / 3-Methylpentane / Benzene / Carbon Dioxide / Decane / Dodecane / Ethane / Ethyl Benzene / Heptane / Hexane / Isobutane / Isooctane / Isopentane / M- Xylene / Methane / N-Butane / N-Pentane / Neopentane / Nitrogen / Nonane / O- Xylene / Octane / P-Xylene / Pentadecane / Propane / Tetradecane / Toluene / Tridecane / Undecane Section 1. Identification GHS product identifier : Flammable Liquefied Gas Mixture: 2-Methylpentane / 2,2-Dimethylbutane / 2, 3-Dimethylbutane / 3-Methylpentane / Benzene / Carbon Dioxide / Decane / Dodecane / Ethane / Ethyl Benzene / Heptane / Hexane / Isobutane / Isooctane / Isopentane / M- Xylene / Methane / N-Butane / N-Pentane / Neopentane / Nitrogen / Nonane / O-Xylene / Octane / P-Xylene / Pentadecane / Propane / Tetradecane / Toluene / Tridecane / Undecane Other means of : Not available. identification Product type : Liquefied gas Product use : Synthetic/Analytical chemistry. SDS # : 018818 Supplier's details : Airgas USA, LLC and its affiliates 259 North Radnor-Chester Road Suite 100 Radnor, PA 19087-5283 1-610-687-5253 24-hour telephone : 1-866-734-3438 Section 2. Hazards identification OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Classification of the : FLAMMABLE GASES - Category 1 substance or mixture GASES UNDER PRESSURE - Liquefied gas SKIN IRRITATION - Category 2 GERM CELL MUTAGENICITY - Category 1 CARCINOGENICITY - Category 1 TOXIC TO REPRODUCTION (Fertility) - Category 2 TOXIC TO REPRODUCTION (Unborn child) - Category 2 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) - Category 3 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 AQUATIC HAZARD (ACUTE) - Category 2 AQUATIC HAZARD (LONG-TERM) - Category 1 GHS label elements Hazard pictograms : Signal word : Danger Hazard statements : Extremely flammable gas. May form explosive mixtures with air.
    [Show full text]
  • Fractional Distillation of Crude Oil
    FRACTIONAL DISTILLATION OF CRUDE OIL • a mixture of hydrocarbons What is crude oil? • hydrocarbons are compounds that contain hydrogen and carbon only • fractional distillation How is it separated? How does this work? • oil is vaporised by heating < 40 C 25°C° FUEL GASES passed into tower/column that is hotter at bottom than top Calor gas, LPG • C1-C4 • hydrocarbons cool and condense as they rise 40-90 C • as they have different boiling points 40°C ° GASOLINE C4-C12 petrol for cars • the smaller the molecule, the higher up the tower/column they reach 11090-160°C °C NAPHTHA petrochemicals C7-C14 160-250°C 200°C KEROSENE jet fuel C11-C15 250-350°C 300°C DIESEL (GAS OIL) C15-C19 fuel for diesel engines vaporised crude oil >350 350°C°C RESIDUE distilled further at lower > C20 pressures to give FUEL OIL, LUBRICATING OIL, WAXES and BITUMEN • a mixture Are the fractions pure substances or mixtures? How can you tell? • the fraction boils over a range of temperatures rather than one specific temperature Small Big hydrocarbons hydrocarbons Boiling points low high How does the size of the hydrocarbons affect its Flammability catch fire hard to ignite properties easily Cleanliness of clean smoky flame Viscosity runny viscous © www.CHEMSHEETS.co.uk 11-July-2017 Chemsheets GCSE 1230 1) Crude oil is a mixture of hydrocarbons. What are hydrocarbons. compounds that contain hydrogen and carbon only 2) The hydrocarbons in crude oil have different properties. Which of these properties does separation by fractional distillation depend on? different boiling points 3) Two of the hydrocarbons in crude oil are decane and pentane.
    [Show full text]
  • N-Alkane Category: Decane, Undecane, Dodecane (CAS Nos
    June 17, 2004 n-Alkane Category: decane, undecane, dodecane (CAS Nos. 124-18-5, 1120-21-4, 112-40-3) Voluntary Children’s Chemical Evaluation Program (VCCEP) Tier 1 Pilot Submission Docket Number OPPTS – 00274D American Chemistry Council n-Alkane VCCEP Consortium Sponsors: Chevron Phillips Chemical Company LP Sasol North America Inc. Shell Chemical LP June 17, 2004 TABLE OF CONTENTS Glossary of Terms 4 1. Executive Summary 5 2. Basis for Inclusion in the VCCEP Program 2.1 Total Exposure Assessment Methodology Data 10 2.2 Air Monitoring Data 11 2.3 How Sponsors Were Identified for the n-Alkane VCCEP Effort 12 3. Previous and On-Going Health Assessments 3.1 OECD SIDS/ICCA HPV Imitative 14 3.2 Total Petroleum Hydrocarbon Criteria Working Group 15 3.3 Hydrocarbon Solvent Guidance Group Values (GGVs) for Setting Occupational Exposure Limits (OELs) for Hydrocarbon Solvents 15 4. Regulatory Overview 4.1 CPSC Child-Resistant Packaging for Hydrocarbons 16 4.2 Occupational Exposure Limits 16 4.3 VOC Regulations 17 5. Product Overview 5.1 Physical, Chemical, and Environmental Fate Properties 18 5.2 Production of n-Alkanes 20 5.3 Uses for n-Alkane Products 20 5.4 Petroleum Products Which Contain n-Alkanes 21 6. Exposure Assessment 6.1 Summary 25 6.2 Non-Occupational Exposure 28 6.2.1 Indoor Sources of Exposure 6.2.2 Outdoor Source of Exposure 6.2.3 Unique Children’s Exposure 6.3 Integrated 24 hour Exposure 36 6.4 Occupational Exposure 36 6.5 Potential for Dermal and Oral Exposure 40 6.6 Selection of Exposure Scenarios and Exposure Concentrations 43 7.
    [Show full text]
  • Chemical Names and CAS Numbers Final
    Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number C3H8O 1‐propanol C4H7BrO2 2‐bromobutyric acid 80‐58‐0 GeH3COOH 2‐germaacetic acid C4H10 2‐methylpropane 75‐28‐5 C3H8O 2‐propanol 67‐63‐0 C6H10O3 4‐acetylbutyric acid 448671 C4H7BrO2 4‐bromobutyric acid 2623‐87‐2 CH3CHO acetaldehyde CH3CONH2 acetamide C8H9NO2 acetaminophen 103‐90‐2 − C2H3O2 acetate ion − CH3COO acetate ion C2H4O2 acetic acid 64‐19‐7 CH3COOH acetic acid (CH3)2CO acetone CH3COCl acetyl chloride C2H2 acetylene 74‐86‐2 HCCH acetylene C9H8O4 acetylsalicylic acid 50‐78‐2 H2C(CH)CN acrylonitrile C3H7NO2 Ala C3H7NO2 alanine 56‐41‐7 NaAlSi3O3 albite AlSb aluminium antimonide 25152‐52‐7 AlAs aluminium arsenide 22831‐42‐1 AlBO2 aluminium borate 61279‐70‐7 AlBO aluminium boron oxide 12041‐48‐4 AlBr3 aluminium bromide 7727‐15‐3 AlBr3•6H2O aluminium bromide hexahydrate 2149397 AlCl4Cs aluminium caesium tetrachloride 17992‐03‐9 AlCl3 aluminium chloride (anhydrous) 7446‐70‐0 AlCl3•6H2O aluminium chloride hexahydrate 7784‐13‐6 AlClO aluminium chloride oxide 13596‐11‐7 AlB2 aluminium diboride 12041‐50‐8 AlF2 aluminium difluoride 13569‐23‐8 AlF2O aluminium difluoride oxide 38344‐66‐0 AlB12 aluminium dodecaboride 12041‐54‐2 Al2F6 aluminium fluoride 17949‐86‐9 AlF3 aluminium fluoride 7784‐18‐1 Al(CHO2)3 aluminium formate 7360‐53‐4 1 of 75 Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number Al(OH)3 aluminium hydroxide 21645‐51‐2 Al2I6 aluminium iodide 18898‐35‐6 AlI3 aluminium iodide 7784‐23‐8 AlBr aluminium monobromide 22359‐97‐3 AlCl aluminium monochloride
    [Show full text]
  • 1 Chapter 3: Organic Compounds: Alkanes and Cycloalkanes
    Chapter 3: Organic Compounds: Alkanes and Cycloalkanes >11 million organic compounds which are classified into families according to structure and reactivity Functional Group (FG): group of atoms which are part of a large molecule that have characteristic chemical behavior. FG’s behave similarly in every molecule they are part of. The chemistry of the organic molecule is defined by the function groups it contains 1 C C Alkanes Carbon - Carbon Multiple Bonds Carbon-heteroatom single bonds basic C N C C C X X= F, Cl, Br, I amines Alkenes Alkyl Halide H C C C O C C O Alkynes alcohols ethers acidic H H H C S C C C C S C C H sulfides C C thiols (disulfides) H H Arenes Carbonyl-oxygen double bonds (carbonyls) Carbon-nitrogen multiple bonds acidic basic O O O N H C H C O C Cl imine (Schiff base) aldehyde carboxylic acid acid chloride O O O O C C N C C C C O O C C nitrile (cyano group) ketones ester anhydrides O C N amide opsin Lys-NH2 + Lys- opsin H O H N rhodopsin H 2 Alkanes and Alkane Isomers Alkanes: organic compounds with only C-C and C-H single (s) bonds. general formula for alkanes: CnH(2n+2) Saturated hydrocarbons Hydrocarbons: contains only carbon and hydrogen Saturated" contains only single bonds Isomers: compounds with the same chemical formula, but different arrangement of atoms Constitutional isomer: have different connectivities (not limited to alkanes) C H O C4H10 C5H12 2 6 O OH butanol diethyl ether straight-chain or normal hydrocarbons branched hydrocarbons n-butane n-pentane Systematic Nomenclature (IUPAC System) Prefix-Parent-Suffix
    [Show full text]