DOCSLIB.ORG

Nixie QTC Plus’ for Parts Bag Serial Numbers from 000 to 185 Onwards

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Nixie QTC Plus’ for Parts Bag Serial Numbers from 000 to 185 Onwards Assembly Instructions And User Guide Nixie Clock Type ‘Nixie QTC Plus’ For Parts Bag Serial Numbers from 000 to 185 onwards Nixie Tube Clock ‘Nixie QTC+’ - 1 - Issue 1 (29 August 2018) www.pvelectronics.co.uk REVISION HISTORY Issue Date Reason for Issue Number Draft 1 29 August 2018 New document Nixie Tube Clock ‘Nixie QTC+’ - 2 - Issue 1 (29 August 2018) www.pvelectronics.co.uk 1. INT RODUCTION 1.1 Nixie QTC Plus - Features Hours, Minutes and Seconds display Drives a wide range of medium sized solder-in tubes Uses a Quartz Crystal Oscillator as the timebase 12 or 24 hour modes Programmable leading zero blanking Date display in either DD.MM.YY or MM.DD.YY or YY.MM.DD format Programmable date display each minute Scrolling display of date or standard display Alarm, with programmable snooze period Optional GPS / WiFi / XTERNA synchronisation with status indicator LED Dedicated DST button to switch between DST and standard time Supercapacitor backup. Keeps time during short power outages Simple time setting using two buttons Configurable for leading zero blanking Double dot colon neon lamps 11 colon neon modes including AM / PM indication (top / bottom or left / right), railroad (slow or fast) etc. Seconds can be reset to zero to precisely the set time Programmable night mode - blanked or dimmed display to save tubes or prevent sleep disturbance Rear Indicator LEDs dim at night to prevent sleep disturbance Weekday aware ‘Master Blank’ function to turn off tubes and LEDs on weekends or during working hours Separate modes for colon neons during night mode Standard, fading, or crossfading with scrollback display modes ‘Slot Machine’ Cathode poisoning prevention routine Programmable RGB tube lighting – select your favourite colour palette 729 colours possible. Have a different colour or your choosing every hour, or autochanging colours Provision for adding switch for independently switching off RGB LEDs Not AC frequency dependent – works in all countries All user preferences stored to non-volatile memory Additional wireless functions if XTERNA module used: - Display of outdoor temperature in Celsius or Fahrenheit. Configurable. - Min / Max temperature in last 24 hours - Wireless, Auto Sync of time from GPS with auxilliary TCXO - GPS Sync time, and time since last GPS Fix - Voltage of XTERNA module battery Nixie Tube Clock ‘Nixie QTC+’ - 3 - Issue 1 (29 August 2018) www.pvelectronics.co.uk 1.2 Tubes Supported Each tube is soldered to a mini PCB 'Cell', making tubes easily changeable. Through the use of 2 different cell types, and 3 different configurations of the microcontroller, it is possible for the kit to drive a wide range of solder-in tubes as detailed in the table below. There are detailed and specific instructions for mounting each type of tube, in sections 5.1 to 5.8 of this manual. Tube types Code Section Configuration IN -14 A 5.1 IN -8-2, ZM1177 A 5.2 Z570 M, Z570 0M, Z573 M, Z573 0M, A 5.3 Z574M, Z5740M, GN-9A, B570M, TAF1317A, TAU7030, F9080B, F9080BA, TAF1093A, ZM1080, ZM1082, ZM1134, ZM1135, ZM1136, ZM1136A, ZM1136L, ZM1136R, ZM1138A, ZM1138L, ZM1138R GNP -17A A 5.4 GNP -7A, GNP -7AH A 5.5 ZM1210, ZM1212 B 5.6 IN -16 C 5.7 CD66, ZM124 0, ZM124 2, XN11, A 5.8 XN12 Nixie Tube Clock ‘Nixie QTC+’ - 4 - Issue 1 (29 August 2018) www.pvelectronics.co.uk 1.3 SAFETY DANGER: The clock pcb includes a switched-mode voltage booster circuit. This generates nominally 170 Volts DC. Assembly may only be undertaken by individuals who are suitably qualified and experienced in electronics assembly, and are familiar with safe procedures for working with high voltages. If in doubt, refer to a suitably qualified engineer before proceeding. The voltages generated by this circuit can give a potentially LETHAL ELECTRIC SHOCK. DISCLAIMER: This product is supplied as a kit of parts, intended only for suitably qualified electronic engineers, who are suitably qualified and experienced in electronics assembly, and are familiar with safe procedures for working with high voltages. The supplier, his agents or associates accept no liability for any damage, injury or death arising from the use of this kit of parts. This is not a finished product, and the person assembling the kit is responsible for ensuring that the finished product complies with any applicable local regulations governing electrical equipment, eg. UL, CE, VDE. Nixie Tube Clock ‘Nixie QTC+’ - 5 - Issue 1 (29 August 2018) www.pvelectronics.co.uk 2. TOOLS AND EQUIPMENT REQUIRED 2.1 Tools required to assemble the PCB. The following tools will be required to assemble the PCB: - Soldering iron with a small tip (1-2 mm). - Wire cutters to trim the excess component leads after soldering. (TIP: A small pair of nail clippers works very well for this function). - Wire strippers (TIP: A small pair of scissors is quite suitable). - Multimeter for voltage tests and for identifying the resistors. - A small hot air gun will be needed to shrink the heat shrink tubing over the neon lamp wires. 2.2 Materials you will need. Solder – lead / tin solder is highly recommended. USE LEAD/ TIN SOLDER! Lead free solder, as now required to be used in commercial products in Europe, has a much higher melting point and can be very hard to work with. Desoldering wick (braid) can be useful if you accidentally create solder bridges between adjacent solder joints. 2.3 Other items you will need. The clock kit does not include a power adapter. The following type of adapter should be obtained and used with the kit: Output 12V DC regulated, minimum power output capability of 500mA Output plug: 2.1mm pin, centre positive. A suitable adapter is shown below: Nixie Tube Clock ‘Nixie QTC+’ - 6 - Issue 1 (29 August 2018) www.pvelectronics.co.uk 3. LIST OF COMPONENTS 3.1 Table of Components – Driver Board Circuit Designation Part Description Resistors R1, R2 4.7 KΩ, ¼ Watt R3, R4 390 KΩ, ¼ Watt R5 300 KΩ, ¼ Watt R6 - R11 270 Ω, ¼ Watt R12 4.7 KΩ, ¼ Watt R13 – R15 1 KΩ, ¼ Watt R16 – R21 4.7 KΩ, ¼ Watt R22 – R25 15 KΩ, ¼ Watt Capacitors C1, C2 220uF Electrolytic C3 1uF, 250V, C4 220uF, 16-25V, Electrolytic C5 10pF Ceramic C6 33pF Ceramic C7 100nF Ceramic C8 0.1F or 0.22F C9, C10 100nF Ceramic Transistors Q1 IRFD220 MOSFET Q2 – Q4 EL817 Optocoupler Q5 MPSA42 Q11 - Q14 MPSA42 Diodes D1 – D3 1N5819 D4 1N4148 D5 UF4004 D6 5mm Yellow LED D7 5mm Green LED D8 5mm Yellow LED D9 62V zener RGB1 – RGB6 APA106 RGB LED Integrated Circuits IC1 LM2576 5V voltage regulator IC2 PIC16F1938 8-bit microcontroller IC3 HV5812 Miscellaneous L1, L2 100uH inductor AM1, AM2, PM1, PM2 4mm wire ended neon lamp ALARM, SET, ADJ, DST Miniature push button IC2 Socket 28 Way narrow IC socket for IC2 IC3 Socket PLCC28 IC socket for IC3 Sockets for Q2 - Q4 12 Way SIL Socket Strip J1 2.1mm PCB power socket GPS / RFT Surface mount 3.5mm jack socket LS1 Piezo sounder FUSE 500mA fuse Nixie Tube Clock ‘Nixie QTC+’ - 7 - Issue 1 (29 August 2018) www.pvelectronics.co.uk Insulation 25 cm Clear insulation for neons NX1 – NX6 2X6 way 0.1” header plug X1 32.768KHz watch crystal Nixie Tube Clock ‘Nixie QTC+’ - 8 - Issue 1 (29 August 2018) www.pvelectronics.co.uk 3.2 Parts list / Packing Sheet - Component Bag Part Description Quantity Resistors 270 Ω, ¼ Watt 6 1 KΩ, ¼ Watt 3 4.7 KΩ, ¼ Watt 9 15 KΩ, ¼ Watt 4 300 KΩ, ¼ Watt 1 390 KΩ, ¼ Watt 2 Capacitors 10pF, Ceramic 1 33pF, Ceramic 1 100nF, Ceramic 3 1uF, 250V, Electrolytic 1 220uF, 16-25V, Electrolytic 3 0.1F or 0.22F 1 Transistors IRFD220 MOSFET 1 MPSA42 5 EL817 Optocoupler 3 Diodes 1N5819 3 UF4004 fast recovery diode 1 1N4148 1 5mm Green LED 1 5mm Yellow LED 2 APA106 RGB LED 6 Integrated Circuits LM2576 5V voltage regulator 1 PIC16F1938 8-bit microcontroller 1 HV5812 1 Miscellaneous 100uH inductor 2 4mm wire ended neon lamp 4 Miniature push button 4 28 way narrow IC Socket for IC2 1 PLCC28 IC Socket for IC3 1 12 Way SIL socket strip 1 2.1mm PCB power socket 1 Surface mount 3.5mm jack socket 1 Piezo sounder 1 500mA fuse 1 25cm Clear insulation for neons 1 2X6 way 0.1” header plug 6 2X6 way 0.1” header socket 6 32.768KHz watch crystal 1 Nixie Tube Clock ‘Nixie QTC+’ - 9 - Issue 1 (29 August 2018) www.pvelectronics.co.uk We recommend to check against the list above, to ensure all parts are present before commencing assembly. The resi stors used in the kit are 1% tolerance metal film. They are marked with 4 coloured bands to identify the value. However it is sometimes unclear in which direction the bands should be read. Therefore, we recommend that the resistors be identified with a multimeter. Please note the fuse w ill look like the picture below. It can easily be confused for a capacitor. It is a self -resetting fuse. The 10pF and 33pF capacitors will be marked 10 and 33 respectively. The 100nF capacitors will be marked 104. Q1 (IRFD220) is in a very similar package to Q2 – Q4 (EL817). You can tell the difference, in addition to the part marking by looking at the pins. Q1 has two pins that are actually joined at the resin body. Q2 – Q4 have 4 separate pins. Inductors L1 and L2 may be one of three types: Nixie Tube Clock ‘ Nixie QTC+’ - 10 - Issue 1 (29 August 2018) www.pvelectronics.co.uk 4.
Load more

Recommended publications
  • Nixie Clock Type ‘Frank 3’
    Assembly Instructions And User Guide Nixie Clock Type ‘Frank 3’ Software version: 5R Hardware Revision: 12 Dec 07, 7 Jan 08 Nixie Clock ‘Frank 3’ - 1 - Table of Contents 1. INTRODUCTION ................................................................3 1.1 About the clock...............................................................3 1.2 Clock features.................................................................3 1.3 Safety ...........................................................................4 2. TOOLS AND EQUIPMENT REQUIRED ............................... 5 2.1 Tools required to assemble the PCB...................................5 2.2 Materials you will need ....................................................6 2.3 Other items you will need ................................................6 3. LIST OF COMPONENTS.......................................................6 3.1 Table of components .......................................................6 3.2 Parts list ................................................................. 7 3.3 How to identify the correct components .............................8 4. ASSEMBLY OF THE PCB ......................................................9 4.1 Diodes D1-D4 .................................................................9 4.2 Diode D5 .......................................................................9 4.3 IC2 and C3.....................................................................9 4.4 IC1 and Q1 .................................................................. 10 4.5 C1, C2 and
    [Show full text]
  • Nixie Clock Type 'Nixie QTC Plus'
    Assembly Instructions And User Guide Nixie Clock Type ‘Nixie QTC Plus’ For Parts Bag Serial Numbers from 1000 onwards Nixie Tube Clock ‘Nixie QTC+’ - 1 - Issue 3 (13 June 2019) www.pvelectronics.co.uk REVISION HISTORY Issue Date Reason for Issue Number 3 13 June 2019 Added support for Dekatron Sync Pulse 2 01 October 2018 C5 changed to 15pF Draft 1 29 August 2018 New document Nixie Tube Clock ‘Nixie QTC+’ - 2 - Issue 3 (13 June 2019) www.pvelectronics.co.uk 1. INTRODUCTION 1.1 Nixie QTC Plus - Features Hours, Minutes and Seconds display Drives a wide range of medium sized solder-in tubes Uses a Quartz Crystal Oscillator as the timebase 12 or 24 hour modes Programmable leading zero blanking Date display in either DD.MM.YY or MM.DD.YY or YY.MM.DD format Programmable date display each minute Scrolling display of date or standard display Alarm, with programmable snooze period Optional GPS / WiFi / XTERNA synchronisation with status indicator LED Dedicated DST button to switch between DST and standard time Supercapacitor backup. Keeps time during short power outages Simple time setting using two buttons Configurable for leading zero blanking Double dot colon neon lamps 11 colon neon modes including AM / PM indication (top / bottom or left / right), railroad (slow or fast) etc. Seconds can be reset to zero to precisely the set time Programmable night mode - blanked or dimmed display to save tubes or prevent sleep disturbance Rear Indicator LEDs dim at night to prevent sleep disturbance Weekday aware ‘Master Blank’ function to turn off tubes and LEDs on weekends or during working hours Separate modes for colon neons during night mode Standard, fading, or crossfading with scrollback display modes ‘Slot Machine’ Cathode poisoning prevention routine Programmable RGB tube lighting – select your favourite colour palette 729 colours possible.
    [Show full text]
  • Build Yourself a Nixie Clock! You May Have Seen Them in Old Sci-Fi Movies and Wondered How They Worked
    Build yourself a nixie clock! You may have seen them in old sci-fi movies and wondered how they worked. Well, here is your chance to experiment with nixie tubes by building your own nixie clock. igital displays such as LEDs and LCDs are everywhere nowadays, Dbut have you ever wondered what was used before these technologies came along? There were several commonly used dig- ital displays—in fact, you may have even owned a digital clock with a mechanical display, where small tiles or cards were flipped over to show the number required. However, there was another type of display quite common before LEDs and LCDs took over—nixie tubes. What is a nixie tube, you ask? Well, nixies are a special type of neon bulb. You have most likely seen the small tific American, June 1973, pp. 66). the am/pm indicator, the colons, and the orange-glowing neon bulbs found in some brightness of the blue LEDs under the powerpoints which are used as power-on A warning nixie tubes. indicators. These consist of a small glass Like other neon tubes, nixies use high The inputs of all the latches are con- bulb filled with neon gas. Inside the bulb voltage. They need around 140 volts or nected in parallel, so they all see the same are two wire electrodes, and when a high more to strike, and then maintain around data, but only the latch who’s control line voltage is present across the electrodes, 120 volts or so across the tube while run- is strobed transfers the input data to its the neon gas between them glows a warm ning, but these figures vary a bit.
    [Show full text]
  • Headphone Amp Nixie Tube Thermometer Cardiac Monitor
    61002 [Microcontrollers & Embedded • Analogue • Audio• Digital • Test & Measurement] January 2011 AUS$ 14.50 - NZ$ 17.50 - SAR 102.95 £ 4.80 HI ENERGETIC ✚ Energy Saving Tips edition www.elektor.com Cardiac Monitor Your ECG by ZigBee Nixie Tube Thermometer Retro Temperature Display Headphone Amp Music to your ears ✚ Free Energy From known and unknown sources ✚ Economical Energy Harvesting R04 More solar powered circuits 61002 Microcontrollers Integrate Touch Sensing Quickly and Easily With Microchip’s Range of Low Power, Low Cost Solutions Controllers Digital Signal Analog Memory Microchip’s mTouch™ Sensing Solutions allow designers to integrate touch sensing GET STARTED IN 3 EASY STEPS with application code in a single microcontroller, reducing total system cost. - Learn more at www.microchip.com/mtouch Microchip offers a broad portfolio of low power, low cost & flexible solutions for keys/sliders and - Download App Notes & royalty-free source code touch screen controllers. Get to market faster using our easy GUI-based tools, free source code - Order a development tool and low-cost development tools. Capacitive Touch Keys and Sliders Touch Screen Controllers t Extend battery life with eXtreme Low Power MCUs t Fully processed touch coordinates − Proximity sensing in less than 1 μA t Projected Capacitive technology t High noise immunity and low emissions − Multi-touch enabling gestures t Broad portfolio of MCUs lowers system cost − Low cost MCU implementation Enhanced mTouch Capacitive Evaluation Kit - DM183026-2 − 8, 16 & 32-bit PIC® MCUs
    [Show full text]
  • Light-Emitting Diode - Wikipedia, the Free Encyclopedia
    Light-emitting diode - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Light-emitting_diode From Wikipedia, the free encyclopedia A light-emitting diode (LED) (pronounced /ˌɛl iː ˈdiː/[1]) is a semiconductor Light-emitting diode light source. LEDs are used as indicator lamps in many devices, and are increasingly used for lighting. Introduced as a practical electronic component in 1962,[2] early LEDs emitted low-intensity red light, but modern versions are available across the visible, ultraviolet and infrared wavelengths, with very high brightness. When a light-emitting diode is forward biased (switched on), electrons are able to recombine with holes within the device, releasing energy in the form of photons. This effect is called electroluminescence and the color of the light (corresponding to the energy of the photon) is determined by the energy gap of Red, green and blue LEDs of the 5mm type 2 the semiconductor. An LED is usually small in area (less than 1 mm ), and Type Passive, optoelectronic integrated optical components are used to shape its radiation pattern and assist in reflection.[3] LEDs present many advantages over incandescent light sources Working principle Electroluminescence including lower energy consumption, longer lifetime, improved robustness, Invented Nick Holonyak Jr. (1962) smaller size, faster switching, and greater durability and reliability. LEDs powerful enough for room lighting are relatively expensive and require more Electronic symbol precise current and heat management than compact fluorescent lamp sources of comparable output. Pin configuration Anode and Cathode Light-emitting diodes are used in applications as diverse as replacements for aviation lighting, automotive lighting (particularly indicators) and in traffic signals.
    [Show full text]
  • Digital Display Circuits This Worksheet and All Related Files Are Licensed Under the Creative Commons Attribution License, Versi
    Digital display circuits This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/, or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA. The terms and conditions of this license allow for free copying, distribution, and/or modification of all licensed works by the general public. Resources and methods for learning about these subjects (list a few here, in preparation for your research): 1 Questions Question 1 What is the purpose of a seven-segment decoder circuit? What is a ”seven-segment” display, and why do we need a decoder circuit to drive it? Research the part number for a typical seven-segment decoder circuit (either CMOS or TTL). file 01417 Question 2 A seven segment decoder is a digital circuit designed to drive a very common type of digital display device: a set of LED (or LCD) segments that render numerals 0 through 9 at the command of a four-bit code: Display driver IC Seven-segment display VDD a a . A b . f b c . g Inputs B d . C e . f . D g . e c d The behavior of the display driver IC may be represented by a truth table with seven outputs: one for each segment of the seven-segment display (a through g). In the following table, a ”1” output represents an active display segment, while a ”0” output represents an inactive segment: D C B A a b c d e f g Display 0 0 0 0 1 1 1 1 1 1 0 ”0” 0 0 0 1 0 1 1 0 0 0 0 ”1” 0 0 1 0 1 1 0 1 1 0 1 ”2” 0 0 1 1 1 1 1 1 0 0 1 ”3” 0 1 0 0 0 1 1 0 0 1 1 ”4” 0 1 0 1 1 0 1 1 0 1 1 ”5” 0 1 1 0 1 0 1 1 1 1 1 ”6” 0 1 1 1 1 1 1 0 0 0 0 ”7” 1 0 0 0 1 1 1 1 1 1 1 ”8” 1 0 0 1 1 1 1 1 0 1 1 ”9” Write the unsimplified SOP or POS expressions (choose the most appropriate form) for outputs a, b, c, and e.
    [Show full text]
  • TB053, Generating High Voltage Using the PIC16C781/782
    M TB053 Generating High Voltage Using the PIC16C781/782 EQUATION 1: Author: Ross Fosler Microchip Technology Inc. di IN L → V VIN = L1 t = iL dt L1 INTRODUCTION The peak current is achieved the moment before Q1 turns off. Equation 2 shows the peak current, where D th The Nixie tube is a device born out of the middle 20 is the duty cycle and T is the period for pulse width century, used to display digital information in a human modulation. readable format. Basically, it is a high voltage numerical display. Today, the Nixie tube has been replaced by EQUATION 2: more efficient, more durable, and longer lasting devices, such as LED displays and LCDs. However, for VIN this Technical Brief, the Nixie tube serves as an excel- DT = IPEAK L lent visual feedback of the PIC16C782’s ability to gen- 1 erate high voltage from a low voltage source. This Technical Brief introduces the boost converter The current in an inductor cannot change instanta- topology operating in Discontinuous mode. As an neously. When Q1 is switched off, the current in L1 con- example, a simple 9V to 170V DC-DC converter is tinues to flow through D1 to the storage capacitor, C1, designed based on this topology, and is used to provide and the load, RL. Thus, the current in the inductor power to a three-digit Nixie tube display. The decreases linearly in time from the peak current. In dis- PIC16C782 is used to control the DC-DC converter and continuous operation, the inductor current actually falls provides data decoding for the display.
    [Show full text]
  • Display Devices
    ELEKTRONIKOS ĮTAISAI 2009 1 DISPLAY DEVICES VGTU EF ESK [email protected] ELEKTRONIKOS ĮTAISAI 2009 2 Display devices Display devices are used for the visual presentation of information. 1. Analog display devices (cathode-ray tubes) • Oscilloscope tubes •TV CRTs 2. Digital display devices • LED (including OLED) displays • VF (vacuum fluorescent ) displays • LCD (liquid crystal) displays • Nixie tube displays and PDPs (plasma display panels) • Electroluminescent displays (ELDs) 3. Others: • Electronic paper • Using principles of nanoelectronics (carbon nanotubes, nanocrystals) • Laser TV VGTU EF ESK [email protected] ELEKTRONIKOS ĮTAISAI 2009 3 Classification of electronic information technologies with high information content; highlighted technologies are treated in this article w4.siemens.de/.../heft2_97/artikel08/index.html VGTU EF ESK [email protected] ELEKTRONIKOS ĮTAISAI 2009 4 Display devices Electronic display devices based on various principles were developed. Active display devices are based on luminescence. Luminescence is the general term used to describe the emission of electromagnetic radiation from a substance due to a non-thermal process. Luminescence occurs from a solid when it is supplied with some form of energy. Photoluminescence arises as a result of absorption of photons. In the case of cathodoluminescence material is excited by bombardment with a beam of electrons. Electroluminescence is a result of excitation from the application of an electric field. Fluorescence persists for a short lifetime of the transition between the two energy levels. Phosphorescence persists for much longer time (more than 10-8 s). Passive display devices reflect or modulate light… VGTU EF ESK [email protected] ELEKTRONIKOS ĮTAISAI 2009 5 Display devices.
    [Show full text]
  • Embedded System Application Ow
    Embedded System 2010 SpringSemester Seoul National University Application [email protected] ower Dept. ofEECS/CSE Naehyuck Chang P 4190.303C ow- L CRT, LCD, OLED and display systems mbedded aboratory E L L P L E Display Devices Bulbs Nixie tube (Numeric Indicator eXperimental-1) - The first electronic digital readout Vacuum fluorescent display Light emitting diode LCD OLED Embedded Low-Power 2 ELPL Laboratory Display System Architecture Principle of operation Single display Group display Massive display More efficient method is required Embedded Low-Power 3 ELPL Laboratory Dynamic Display Spinning dishes Static spinning Spin one dish per hand Dynamic spinning Spine several dishes per hand Use of inertia Static display Display the device the same information at all times Dynamic display Use of human perception Pulse display for illusion For group and massive display Embedded Low-Power 4 ELPL Laboratory Dynamic Display Human eyes cannot perceive a light source that is blinking faster than 30Hz Embedded Low-Power 5 ELPL Laboratory CRT Display Cathode Ray Tube (CRT) Embedded Low-Power 6 ELPL Laboratory CRT Display Horizontal and vertical deflection Intensity BW or color Horizontal deflection control Vertical deflection control Embedded Low-Power 7 ELPL Laboratory CRT Display Raster scan Left to right Top to bottom Rely on afterimage 30Hz or higher refresh rates Video timing Hsync signal for horizontal retrace Vsync signal for vertical retrace Embedded Low-Power 8 ELPL Laboratory CRT Display Sweep signal Saw tooth waveform 15.75KHz saw tooth
    [Show full text]
  • Nixie-Transistor Clock Assembly Manual
    Nixie-Transistor Clock Assembly Manual KABTRONICS INTRODUCTION Manual Version Date PCB version Change Details 1.2 6/6/2011 Version 3 Initial shipments 1.3 1/10/2012 Version 4 Updates from first builders 1.4 7/4/2013 Version 5 PS drive circuit mod, 24 Hour shutoff mod, update schematic and BOM 1.5 6/29/2014 Version 5 Add text for oscillator frequency selection 1.6 4/2/2015 Version 5 Update BOM 1.7 10/8/2016 Version 5 Add SENSE resistor selection text Document 1.7 for PCB version 5 Copyright © October 8, 2016 by KABtronics Nixie Transistor Clock Kit Page 2 KABTRONICS INTRODUCTION Table of Contents INTRODUCTION ........................................................................................................................................ 5 UNPACKING/PARTS LIST .......................................................................................................................... 6 SOLDERING .............................................................................................................................................. 7 UNSOLDERING ................................................................................................................................................. 8 OPTIONAL CLEAN -UP ........................................................................................................................................ 8 BUILD ORDER ........................................................................................................................................... 9 12 VOLT SUPPLY ...........................................................................................................................................
    [Show full text]
  • Nixie Clock Type 'Nixie QTC'
    Assembly Instructions And User Guide Nixie Clock Type ‘Nixie QTC’ Nixie Tube Clock ‘Nixie QTC’ - 1 - Issue 10a (21 March 2014) www.pvelectronics.co.uk REVISION HISTORY Issue Date Reason for Issue Number 10a 21 March 2014 Errors corrected 10 20 March 2014 New tube types added and code configuration procedure 9 03 April 2013 Troubleshooting connections chart added ZM1177 tube procedure clarified 8a 09 September 2013 Improved IN14 cell details 8 21 October 2012 WWVB No Longer supported 7 8 October 2012 ZM1177 Tube details added 6 5 August 2012 Component designation errors corrected 5 27 July 2012 New PCB date 5 July 2012 4 14 June 2012 1st review 3 29 May 2012 Errors in component listing corrected 2 22 May 2012 Anode resistors corrected to 10KΩ 1 20 May 2012 New document Nixie Tube Clock ‘Nixie QTC’ - 2 - Issue 10a (21 March 2014) www.pvelectronics.co.uk 1. INT RODUCTION 1.1 What is Nixie QTC? Nixie QTC takes a new path for Nixie Clocks for mid-sized solder-in tubes. Learning from our past experiences of thousands of kits sold, we recognise a major customer concern and possibly the biggest drawback with solder-in tubes: They are soldered in! Previously, a failed tube always meant a treacherous operation to delicately remove the tube whilst trying to preserve all traces intact. Whilst this was certainly possible, It was never easy, and made it uncomfortable to give a Nixe Clock as a gift in case a tube ever failed. With Nixie QTC (‘Quick Tube Change’), each tube is soldered only to its own mini ‘tube cell’ PCB.
    [Show full text]
  • What Is LCD (Liquid Crystal Display)?
    UNIT - IV DISPLAY DEVICES SPH 1102- PHYSICS OF ELECTRON DEVICES TOPICS COVERED: Introduction - what is display devices? - Luminescence - Electroluminescence Active Display Devices - CRT – Cathode Ray Tube - LED – Light Emitting Diode Passive Display Devices - LCD – Liquid Crystal Display - Plasma Display - Dynamic Scattering Display - Touch screen INTRODUCTION Definition: - A display device is an output device for presentation of information in visual or tactile form (the latter used for example in tactile electronic displays for blind people). When the input information is supplied as an electrical signal, the display is called an electronic display. - Display devices are used for the visual presentation of information. Types of display devices: Electronic display devices based on various principles were developed. - Active display devices are based on luminescence. - Passive display devices reflect or modulate light LUMINESCENCE Definition: Luminescence is the general term used to describe the emission of electromagnetic radiation from a substance due to a non-thermal process. Luminescence occurs from a solid when it is supplied with some form of energy. Types of Luminescence: - Photoluminescence arises as a result of absorption of photons. - Fluorescence persists for a short lifetime of the transition between the two energy levels. - Phosphorescence persists for much longer time (more than 10-8 s). -Cathodoluminescence - Excitation of electrons by bombardment with a beam of electrons. -Electroluminescence - Excitation of electrons by application of an electric field. - Thermoluminescence – Excitation of electrons by the application of High temperature. - Chemiluminescence - Excitation of electrons due to chemical reaction. Active Display Devices Electronic visual displays present visual information according to the electrical input signal (analog or digital) by emitting light, they are called active displays.
    [Show full text]