Jetstream

Jetstream has the most comprehensive products, service, rental, and training in the industry. Whether you are looking to purchase or rent purchase are looking to in the industry. Whether you service, rental, and training products, Jetstream has the most comprehensive and with the most experienced got you covered need servicewaterblasting equipment, or if you and support for your existing equipment, we’ve are serviced Solutions. With 14 convenient locations, FS Solutions by FS industry. In the United States, our products team in the customer-focused high-performance services. parts Johnson In Canada, Joe provides and safety training and accessories, Jetstream rentals, repair and rebuild, and has the financial strength, backing, Signal Corporation need. Jetstream is a subsidiary of Federal handle your every Equipment (JJE) is there to support the world to around any customer. and network of distributors When you need us, we’ll be there. When you

That’s what you get with everything we offer. Jetstream of Houston is the leading designer, manufacturer, and provider of innovative high-pressure of innovative and provider manufacturer, designer, is the leading of Houston Jetstream we offer. everything what you get with That’s and hydro-demolition cleaning, surface of applications including industrial preparation, for a wide range and solutions waterblasting products that get the job done. Innovative safe, sure, and simple solutions with our customers provided we have waterjet cutting. Since 1976, abrasive include: easily replaceable distinct Jetstream features that coating technologies create and unique manufacturing processes, designs, advanced fluid ends for pumps. With simple and easily interchangeable cartridgesvalve tools, components, oil-less water bearings for rotating and internal performance, maximum safety and deliver exceptional Visual Safety System markings, our products yet rugged construction and color-coded job. and minimal downtime on every productivity, Performance Pressure. Under Waterblasting Units

Variety of Engine Options Belt Guard

Innovative UNx™ Pump

Guardian Water Tank Filtration System

EZ-Lube Wheel Bearings Power Take-Off Trailer or Skid-Mounted Configurations Units

SERIES 6000 Series From the innovative UNx™ pump down The TwinForce™ Series was engineered The 6000 Series waterblasting system to the EZ-Lube wheel bearings, every to outperform other high-flow units by is engineered to outperform and outlast detail of the X-Series was engineered providing a multi-functional product any other unit of its kind. to minimize maintenance and provide to enhance the utilization of two contractors with the most productive waterblasting units on one single trailer. and versatile waterblaster on the market today.

3000HT Series Electric Units Jetstream’s HydroForce™ waterblasting The 3000HT is engineered for accurate Jetstream manufactures several units provide pressures up to 22,500 psi hydrostatic testing in any environment models of electric waterblasters for to support hydrostatic testing In the oil around the world. Standard working in-plant installations configured to user and gas industry. pressures range from 7,500 to 20,000 requirements. PSI (500 to 1400 bar) at 125 HP. UNx™ Bareshaft Pumps Strongest Power Frame in the Industry

Largest Bearings of any Pump on the Market

Internal Components Designed for Easy Maintenance and Reduced Downtime

Heat treated Billet Alloy Steel Crankshaft

Fast in-the-field pressure conversions with bolt-on Jetstream UNx™ Fluid Ends UNx Pumps 6000 Series Input power up to up power Input kW) (447 600hp 115.4 Max: Output (437psi 8,000 at gpm bar) 551 at lpm gpm 46.1 Min: Output (174.5psi 20,000 at bar) 1379 at lpm ‣ ‣ ‣ ‣ ‣ ‣ 5200 Series Input power up to 400 to up power Input kW) (300 hp 90.4 Max: Output (342psi 6,800 at gpm bar) 469 at l/min gpm 13.5 Min: Output l/ (51 psi 40,000 at bar) 2750 at min ‣ ‣ ‣ ‣ ‣ ‣ vide a variety of flow rates for any application. Jetstream rates for of flow vide a variety o Superior performanceSuperior Greater flexibility in the field maintenance and downtime Reduced ‣ ‣ ‣ ‣ ‣ ‣ UNx™ Fluid End Benefits UNx™ Fluid End 4200 Series Input power up to 325 to up power Input kW) (242 hp 63.0 Max: Output (238psi 8,000 at gpm bar) 550 at l/min gpm 11.9 Min: Output l/ (45 psi 40,000 at bar) 2750 at min ‣ ‣ ‣ ‣ ‣ ‣ provide unrivaled durability and strength. Our triplex pumps are capable of power inputs up to inputs up to capable of power triplex pumps are strength. Our and durability unrivaled provide 3600 Series Output Max: 46 gpm 46 Max: Output l/ (173 psi 6,000 at bar) 400 at min gpm 7.3 Min: Output l/ (28 psi 40,000 at bar) 2750 at min Input power up to 270 to up power Input kW) (201 hp ‣ ‣ ‣ ‣ ‣ ‣ UNx™ Bareshaft Pumps UNx™ Bareshaft The placement of the crankshaft (right hand or left hand side) and paint color are required when ordering a bareshaft pump. (right hand or left hand side) and paint color are required The placement of the crankshaft 3000 Series Heat treated billet alloy steel crankshaft steel alloy billet treated Heat market the on pump any of bearings Largest Ductile iron power frame is the strongest in the industry the in strongest the is frame power iron Ductile Output Min: 5.2 gpm 5.2 Min: Output l/ (20 psi 40,000 at bar) 2750 at min Input power up to 150 to up power Input kW) (112 hp gpm 23 Max: Output l/min (88 psi 9,500 at bar) 650 at ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ Power End Features NOTE: Jetstream’s Jetstream’s 600 horsepower and - coupled with the best Jetstream UNx™ fluid end - pr and - coupled with the best Jetstream 600 horsepower pump. a complicated, worn, or unreliable their own system or replacing are the best choice for those building bareshaft pumps Standard paint color is yellow. Orbi-Jet™ X22 Twis-Lok™ Lightweight Shroud protects tool and provides safe water displacement

Easy seven minute in- the-field overhaul using the Rebuild Kit with two standard hex wrenches

Magnetic braking system controls rotational speed to reduce wear and maximize impact without streaking Uses tungsten carbide OX Series nozzles or Sapphire UHPX/UHPXi Series nozzles for complete cleaning Orbi-Jet X22

√ √ √ √ √ √ √ 15K KIT (PN 63306) (PN

√ √ √ √ √ √ (PN 63392) (PN STARTER KIT STARTER

bar √ √ √ √ √ √ √ √ 1034 (PN 63305) (PN PREMIUM KIT PREMIUM PRESSURE** MAX. OPERATING MAX. OPERATING psi 15,000 lpm 28.4 RATE 7.5 (HAND GUN) (HAND MAX. FLOW gpm Adapter Hook Pick Hook DESCRIPTION kg 3/16” Hex Key 3/16” 5/32” Hex Key 0.95 20K Rebuild Kit Nozzle Container Nozzle Orbi-Jet X22 Tool O-Ring Maintenance Kit WEIGHT ASSEMBLY lbs 2.1 mm 102 P/N 52305 63301 63230 28386 63442 63302 63443 65060 in ADAPTER) ASSEMBLY 4.0 LENGTH (WITH LENGTH All kits include a case, the Product Instructions, and the Quick Start Guide. TOOL KITS 51 mm DIAMETER in 2.0 (LESS SHROUD) RPM SPEED SPEED RANGE 1000-1500 is a rugged, self-powered, rotating tool utilizing up to four compound angle, hard-hitting, replaceable nozzles, nozzles, replaceable angle, hard-hitting, four compound up to utilizing tool rotating self-powered, is a rugged, ™ X22 Jetstream Twis-Lok™ light-weight shroud protects tool from damage during operation and provides safer water displacement water safer provides and operation during damage from tool protects shroud light-weight Twis-Lok™ Jetstream Rebuild kit allows easy seven minute overhaul of wear components in the field using two standard hex wrenches Series Sapphireor Carbide nozzles OX UHPX/UHPXi Tungsten Series with Use nozzles Each of the four powerful, compound-angle, rotating jets follows a different cleaning path to provide greater coverage and less streaking less and coverage greater provide to path cleaning different a follows jets powerful,four the of Each rotating compound-angle, clean complete a for nozzles four all use or path wide a for nozzles two path, narrow a for nozzles two nozzle: one in tools Three streaking without impact maximum and wear minimal for speed rotational controls system braking Magnetic Orbi-Jet ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ INLET CONNECTION* CONNECTION* INLET 3/8" NPT Female rated up to 22,000 psi. The tool rotates in multiple 360° user-selectable patterns to provide maximum surface coverage and surface maximum coverage provide patterns to user-selectable in multiple 360° rotates The tool 22,000 psi. up to rated cleaning. superior The *Inlet connection on the tool MP; is inlet 9/16" listed is with the adapter that is included in the part numbers shown. **Without Adapter, 15K Orbi-Jet X22 max pressure is 22,000 psi bar). (1500 Multiple Head Assemblies Available

Replaceable Cartridge for Fast and Easy Repair

Magnetic Braking System

Straight Jet Pattern for Concentrated Cleaning Power MagJet X40

√ √ √ √ √ √ √ √ T4/T6 (66238) PREMIUM

√ √ √ √ √ √ √ √ Seal Cartridge T3/T5 (65307) PREMIUM

√ √ √ √ √ √ √ (PN 66237) T6 STARTER T6

√ √ √ √ √ √ √ (PN 65308) T5 STARTER T5

bar

3,000 √ √ √ √ √ √ √ PRESSURE (PN 66236) T4 STARTER T4 MAX. OPERATING MAX. OPERATING psi

43,500 √ √ √ √ √ √ √ lpm 26.5 (PN 65306) (PN T3 STARTER T3 RATE MAX. FLOW 7.0 (HAND GUN) (HAND gpm kg 1.8 WEIGHT ASSEMBLY lbs 4.0 Seal Kit Seal DESCRIPTION 5/32” Hex Key 3/32” Hex Key Seal CartridgeSeal MagJet X40 Tool Plastic Container Plastic mm 238 T4 Head Assembly Head T4 T6 Head Assembly Head T6 T5 Head Assembly Head T5 T3 Head Assembly Head T3 LENGTH in ASSEMBLY 9.4 57 mm P/N 57911 64919 64920 65804 64635 65445 65803 63808 65060 63300 in DIAMETER 2.3 All kits include a case, the Product Instructions, and the Quick Start Guide. rpm SPEED SPEED RANGE 1000-2500 ™ is a rugged, self-powered, rotating tool utilizing up to four straight-pattern, hard-hitting, replaceable sapphire replaceable hard-hitting, straight-pattern, four up to utilizing tool rotating self-powered, ™ is a rugged, Premium Kits and Starter Kits are available for full product tools Starter and Kits Premium product full for available are Kits Rebuild kit allows five minute completeoverhaul of wear components right in the field Sapphirewith Use UHPX/UHPXi Series nozzles Series UHPXD Diamond Synthetic or Straight-pattern nozzles produce concentrated streams for more cleaning power than a fan tip fan a than power cleaning more for streams concentrated produce nozzles Straight-pattern Multiple head assemblies are available so that the desired rotation speed can be maintained across a wide range of flowrates cleaning maximum and wear minimal for speed rotational controls system braking Magnetic MagJet X40 MagJet ‣ ‣ ‣ ‣ ‣ ‣ INLET CONNECTION* CONNECTION* INLET 9/16˝ HP Female ‣ ‣ ‣ ‣ ‣ ‣ TOOL KITS The superior cleaning. and maximum surface coverage provide to in a 360° pattern rotates The tool 43,500 psi. to up rated nozzles, Completely field repairable in less than 5 minutes! Rotors spin on a water bearing. No oil or ball bearings needed!

Configured with seven factory- installed nozzles

Magnetic Braking System controls rotation speed for maximum cleaning and minimal wear J-Force Puller Universal Unplugger 4-Inch J-Force™ Gen II AND 6-Inch J-Force™ ompletely field repairable in less than5 minutes! Polisher Equipped with two forward-facing two with Equipped ports ports rearward-radial two two and 10°, at 100°, at portsfacing 135° at nozzles type JS2 and P2TCS accepts II Gen J-Force 4-Inch nozzles JS4F and P4TC accepts J-Force 6-Inch maximumfor speed rotation controls which system braking eddy-current an with Designed wear minimum and power cleaning C includekits Premium tools. Starterand Kits Premium product full for available are Kits sealantand bearing, thrust a bushings, O-rings, mandrel, replacement a with kit rebuild a easily and quickly tool the rebuild completely to required ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ tools are self-powered rotating tools designed to easily navigate and clean pipes with bends. The tools have have The tools with bends. and clean pipes easily navigate to designed tools rotating are self-powered tools are factory installed andinstalled factory are Universal 2-Inch J-Force™ quipped with three forward-facing three with quipped ports E ports radial two and 90°, at 15°/30°/45°, at rearward-facingtwo ports 132° at nozzles Seven timethe at separately purchased be must order of J-Force™ Series J-Force™ ‣ ‣ ‣ ‣

front, side, and rear jets that clear blockages, clean, and provide thrust to propel the tools down the pipe for maximum cleaning down the pipe for maximum cleaning tools the propel thrust to provide that clear blockages, clean, and side, and rear jets front, There are no spin. the bearing on which the nozzles motion and creates the rotational provides Water wear. power and minimum replace! to oil or ball bearings The Kits J-Force Kits √ √ √ √ √ √ √ √ 66218 PREMIUM 9/16” MP RH Rebuild Kit Rebuild √ √ √ √ √ √ √ 66218 STARTER 9/16” MP RH

√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ M24 66217 65381 PREMIUM PREMIUM 9/16” MP LH

√ √ √ √ √ √ √ √ √ √ √ √ √ M24 66217 STARTER 65381 STARTER 9/16” MP LH √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ 66216 65380 PREMIUM 9/16” MP PREMIUM 3/4” TYPE M √ √ √ √ √ √ √ √ √ √ √ √ √ √ 66216 STARTER 65380 STARTER 9/16” MP 3/4” TYPE M √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ 66215 64915 3/8” NPT PREMIUM 1/2” NPT PREMIUM √ √ √ √ √ √ √ √ √ √ √ √ √ √ 66215 64915 3/8” NPT STARTER 1/2” NPT STARTER DESCRIPTION Rebuild Kit Rebuild JFX22 Tool DESCRIPTION Rebuild Kit Rebuild Loc-tite 242 JF4X15 Tool 7/8” Wrench JF6X15 Tool 1/4” Hex Key 1/4” JF6X22 Tool 1-1/4” Wrench 3/16” Hex Key 3/16” 1-1/4” Wrench Plastic Container Plastic Plastic Container Plastic 3/8” Socket Wrench 1/2” Socket1/2” Wrench Bushing Removal Tool Removal Bushing Bushing Removal Tool Removal Bushing O-Ring Maintenance Kit O-Ring Maintenance Kit 1/4” Square Drive1/4” Wrench 1/4” Square Drive1/4” Wrench P/N P/N 67013 65721 65478 65478 66249 66248 65387 65642 66807 65040 66967 65388 63809 63300 63806 66808 66808 66806 All kits include a case, the Product Instructions, and the Quick Start Guide. All kits include a case, the Product Instructions, and the Quick Start Guide. 6” J-FORCE™ TOOL KITS 4” J-FORCE™ GEN II TOOL KITS RotoMag™ X22

Five minute in-the-field overhaul using the Rotors spin on a water bearing. Rebuild Kit with two No oil or ball bearings needed! standard hex wrenches

Use flush mounted nozzles for cleaning pipes or available extensions for cleaning larger pipes

Magnetic braking system controls rotational speed to reduce wear and maximize impact without streaking Optional tow ring with eye available RotoMag X22 8 Port

bar 1551 1551 PRESSURE psi MAX. OPERATING MAX. OPERATING 22,500 22,500 lpm 303 303 RATE 80 80 MAX. FLOW (HAND GUN) (HAND gpm 6 Port kg 2.7 2.7 WEIGHT 6 6 ASSEMBLY lbs mm 225 225 in ADAPTER) ASSEMBLY 8.65 8.65 LENGTH (WITH LENGTH

70 70 mm DIAMETER in 2.75 2.75 (LESS SHROUD) NO MAGNETS 4 Port RPM > 300 50-300 SPEED RANGE SPEED are self-powered rotating tools designed for cleaning stacks, sewer lines, drains, tanks, on- lines, drains, stacks, sewer designed for cleaning tools rotating are self-powered NOZZLE SIZE NOZZLE 1/2"-28 UNEF 1/2"-28 1/2"-28 UNEF 1/2"-28 1/4" NPT Male 1/4" 1/4" NPT Male 1/4" RotoMag X22N RotoMag and 2 Port 3/4˝ MP Female 3/4˝ MP Female INLET CONNECTION* CONNECTION* INLET Includes six nozzle port nozzle six Includes plugs Magnetic braking system controls rotational speed for minimal wear and maximum impact without streaking without impact maximum and wear minimal for speed rotational controls system braking Magnetic Rebuild kit allows five minute replacement of wear components right in the fieldusing two standard hex wrenches Water provides the rotational motion and creates the bearing on which the rotor spins. No oil or ball bearings to replace! to bearings ball or oil No spins. rotor the which on bearing the creates and motion rotational the provides Water Up to eight flush mounted nozzle inserts provide low profile for cleaning small pipes while extensions areavailable for larger pipes, allowing the diameter in inches 60 to 3-1/2 from ranging pipes clean to RotoMag Carbide Carbide RM Series Sapphireor Tungsten nozzles RMSuses X22N Tungsten RotoMag The Series uses X22 RotoMag The nozzles. nozzles Series JS4F Steel Stainless or Series P4TC RotoMag X22 RotoMag ‣ ‣ ‣ ‣ ‣ ‣ 65231 65232 63945 65095 ‣ ‣ ‣ ‣ ‣ ‣ PART NO. The line boilers, and other large diameter pipes. and other large line boilers, RotoMag™ X22 Kits RotoMag Kits Rebuild Kit Rebuild √ √ √ √ √ √ √ √ √ X22N STARTER X22N √ √ √ √ √ √ √ √ √ √ √ X22N PREMIUM √ √ √ √ √ √ √ √ √ X22 STARTER √ √ √ √ √ √ √ √ √ √ √ X22 PREMIUM Adapter Tow Ring Hook Pick Hook DESCRIPTION Rebuild Kit Rebuild 1/4” Hex Key 1/4” 3/16” Hex Key 3/16” 3/32” Hex Key Plastic Container Plastic RotoMag X22Tool RotoMag X22N Tool Reusable Threadlocker O-Ring Maintenance Kit O-Ring Maintenance Kit P/N 65168 63814 64763 52386 63807 29534 54535 63945 65095 63443 63808 63809 63806 All kits include a case, the Product Instructions, and the Quick Start Guide. Swivel X15/X22

One piece seal shaft and cartridge provide low Use flush mounted nozzles replacement cost and or available extensions for quick changeout cleaning a variety of pipe sizes

Internal oil pumps controls rotational speed of the tool Swivel X15/X22

bar 1516 1034 PRESSURE MAX. OPERATING MAX. OPERATING psi 15,000 22,000 lpm 189 RATE 50 MAX. FLOW gpm 5 kg WEIGHT ASSEMBLY 11 lbs mm 241 LENGTH in ASSEMBLY 9.5 92 mm DIAMETER in 3-5/8" RPM 64247) available for full servicingfull for tools available 64247) 50-1000 SPEED RANGE SPEED are self-powered, 360° rotating swivel tools designed for cleaning medium to large diameter large diameter medium to designed for cleaning swivel tools 360° rotating are self-powered, Swivel X22 3/4” MP Female3/4” INLET CONNECTION* CONNECTION* INLET 3/4" NPT Female3/4" 64180) and Rebuild Kit (PN. Kit Rebuild and 64180) and MODEL Premium Kits and Starter Kits available for full product tools. Each kit contains one of the available nozzle holder configurations (PN. Kit Oil Stainless steel swivel and head with flows upto 50 gpm(189.2 lpm). Flowrate calculatedby multiplying number of nozzles by the flow rate Swivel X15 uses up to six flush mounted P4TC or standard HHTC0 nozzles. Swivel X22 uses sixTungsten two, or Carbide four, seven RM nozzles Series RMS Sapphire or nozzles Series hours 100 over life oil and seal Typical needed silicone No cartridgeand shaft seal the with change, quick and cost replacement seal Low piece one in all spillage or change oil without adjustment Speed Rotational speed of the nozzle head is controlled by the internal oil pump assembly on the swivel the on assembly pump oil internal the by controlled is head nozzle the of speed Rotational Swivel X15 Swivel X15 Swivel Swivel X22Swivel ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ ‣ The pipes. Swivel X15/X22 Kits Swivel Kits √ √ √ 65162 65978 6 PORT, ORS,R44 PREMIUM √ √ √ 65978 6 PORT, 65327 ORS,R22 PREMIUM √ √ √ √ √ √ √ √ √ √ √ √ PREMIUM 7 PORT, RM,R44 65033-7RM44 √ P4,R44 P4,R44 7 PORT, 65323 64682 PREMIUM √ √ √ √ √ √ √ √ √ √ √ √ PREMIUM √ √ 6 PORT, RM,R44 65033-6RM44 P4,R44 P4,R44 6 PORT, 52963 64682 PREMIUM √ √ √ √ √ √ √ √ √ √ √ √ √ PREMIUM P4,R22 7 PORT, 65328 64682 PREMIUM 7 PORT, RM,R22 65033-7RM22 √ √ √ √ √ √ √ √ √ √ √ √ √ √ P4,R44 P4,R44 6 PORT, 65326 64682 PREMIUM PREMIUM 6 PORT, RM,R22 65033-6RM22 √ √ √ 65162 65978 6 PORT, ORS,R44 STARTER √ √ √ √ √ √ √ √ √ √ STARTER 7 PORT, RM,R44 65033-7RM44 √ √ √ 65978 6 PORT, 65327 ORS,R22 STARTER √ √ √ √ √ √ √ √ √ √ √ STARTER P4,R44 P4,R44 7 PORT, 65323 64682 STARTER 6 PORT, RM,R44 65033-6RM44 √ √ √ √ √ √ √ √ √ √ √ √ P4,R44 P4,R44 6 PORT, 52963 64682 STARTER STARTER 7 PORT, RM,R22 65033-7RM22 √ P4,R22 7 PORT, 65328 64682 STARTER √ √ √ √ √ √ √ √ √ √ STARTER √ √ 6 PORT, RM,R22 65033-6RM22 P4,R22 6 PORT, 65326 64682 STARTER STARTER Oil Kit Syringe Hose Barb Hose Hose Barb Hose DESCRIPTION Rebuild Kit Rebuild Tow Ring 1/8” Hex Key 1/8” DESCRIPTION Plastic Tubing Plastic 3/16” Hex Key 3/16” Seal AssemblySeal Nozzle Plug Plastic Container Plastic Plastic Container Plastic Nozzle Holder Nozzle Swivel AssemblySwivel Swivel X22 Assembly Oil Seal Installation Tool Installation Seal Oil 2” Nozzle Extensions : 3/4” ORS nozzle: 3/4” holders require some form ofextensions NPT allow to nozzles. ¼” assemblies Tool come with two 2” nozzle extensions (PN 65456-02). P/N P/N 64180 64247 64819 64242 64249 52820 64245 64244 63872 64820 52965 53405 63809 63300 65456-02 NOTE All kits include a case, the Product Instructions, and the Quick Start Guide. All kits include a case, the Product Instructions, and the Quick Start Guide. SWIVEL X22 TOOL KITS SWIVEL TOOL X15 KITS Tow ring used to suspend or position tool for optimal effectiveness Four manifold options offered to maximize precision of your application

Maintenance-free magnetic braking system controls rotational speed of the tool H3Orbiter Orbiter 3 Orbiter Centralizer 3

bar 1500 PRESSURE MAX. OPERATING MAX. OPERATING psi 22,000 Kickplate Assembly for H lpm 307 RATE 80 MAX. FLOW gpm kg 16 WEIGHT ASSEMBLY lbs 35 mm 423 LENGTH in ASSEMBLY 16.65 mm 100 DIAMETER 4 in Orbiter can be placed in a centralizer with an optional kick plate. When installed with the centralizer, the kick platekick the centralizer, the with installed When plate. kick optional an with centralizer a in placed be can Orbiter 3 RPM SPEED RANGESPEED O) is a 3-D waterblasting tool designed to effectively and efficiently clean tanks and vessels. The rotation of The vessels. clean tanks and and efficiently effectively to designed tool waterblasting O) is a 3-D 3 Adjustable; 8-50 rpm Orbiter Mounted in Centralizer 3 H ™ (H Orbiter (MALE) 3 Wide range of accessories are available including cage centralizers and extensions. Only 1” or 2” extensions can be used when the H the when used be can extensions 2” or 1” Only extensions. and centralizers cage including available are accessories of range Wide H the cleaning, pipe For Four manifolds offered for application precision: High (50 to 80 gpm), Medium (28 to 55 gpm), Low (16 to 30 gpm), and Extra Low Flow (10Flow Low Extra and gpm), 30 to (16 Low gpm), 55 to (28 Medium gpm), 80 to (50 High precision: application for offered manifolds Four gpm) 18 to Made from stainless steel stainless from Made life longer for components Enhanced brake magnetic maintenance-free a by controlled speed Rotational allows for self generated forward movement with each 180º rotation of the manifold the of rotation 180º each forwardwith movement generated self for allows is installed in the centralizer the in installed is H CONNECTION* ‣ ‣ ‣ ‣ ‣ ‣ 1-1/8" ORS Male ‣ ‣ ‣ ‣ ‣ ‣ the nozzles and body allow the tool to perform a complete 360 degree clean at pressures up to 22,000 psi (1500 bar). Flow rates bar). Flow rates psi (1500 22,000 perform pressures up to degree clean at a complete 360 to tool body allow the and the nozzles Medium 302 lpm): High Flow, (37 to 80 gpm to 10 that provide manifold options four different through are controlled required speed. rotation control used to is brake magnetic A maintenance-free Low Flow. and Extra Flow, Low Flow, The Kits H3Orbiter Kits

√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ (PN 65633-030) (PN (R150) STARTER (R150) EXTRA LOW FLOW

√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ LOW FLOW FLOW LOW (R90) STARTER (R90) (PN 65633-090) (PN

√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ MEDIUM FLOW FLOW MEDIUM (R50) STARTER (R50) (PN 65633-050) (PN

√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ HIGH FLOW (R30) STARTER (R30) (PN 65633-030) (PN

√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ PREMIUM (PN 65634) (PN Adapter Tow Ring Orbiter Tool Orbiter DESCRIPTION Service Kit 3 Loc-Tite 242 Loc-Tite 3/8” Hex Key R50 Manifold R50 R30 Manifold R30 R90 Manifold 6” Extensions 6” 2” Extensions2” Coupling Plug H R150 Manifold R150 24” Extensions 24” 12” Extensions 12” Type M AdapterType Plastic Container Plastic Seal Removal Tool Removal Seal 1-1/8” ORS Coupling 1/2” NPT Half Coupling Half NPT 1/2” 9/16” Check9/16” Nut Wrench Blue Anti-Seize Lubricant Anti-Seize Blue 11/16” Check Nut Wrench 11/16” P/N 65311 27721 65721 65675 65676 64249 65729 65678 65631 65677 52684 28335 65367 28433 65665 66050 66082 50990 66083 65456-12 65456-24 65456-02 65456-06 All kits include a case, the Product Instructions, and the Quick Start Guide. Five minute in-the-field overhaul using the Multiple nozzles holders Rebuild Kit available to suit any application

Magnetic braking system controls rotational speed to reduce wear and maximize impact without streaking MagDart X40

√ √ √ √ √ √ √ √ 67112-R17 R17 PREMIUM R17

√ √ √ √ √ √ √ √ 67112-R10 R10 PREMIUM R10

√ √ √ √ √ √ √ R17 POLISHER 66800-R17P

√ √ √ √ √ √ √ R10 R10P 66800- POLISHER

bar 3,000 √ √ √ √ √ √ √ R17 R17UP 66800- UNPLUGGER UNPLUGGER PRESSURE

MAX. OPERATING MAX. OPERATING psi 43,500 √ √ √ √ √ √ √ R10 R10UP 66800- UNPLUGGER 45 lpm

RATE √ √ √ √ √ √ √ √ √ √ MEGA 12 66799 MAX. FLOW gpm kg 13 WEIGHT ASSEMBLY lbs 6.0 251 mm Seal Kit Seal DESCRIPTION 5/32” Hex Key 3/32” Hex Key Seal CartridgeSeal LENGTH Plastic Container Plastic MagDart X40 Tool in ASSEMBLY 9.9 R17 Polisher Nozzle Holder Nozzle Polisher R17 R10 Polisher Nozzle Holder Nozzle Polisher R10 R17 UnpluggerR17 Nozzle Holder R10 UnpluggerR10 Nozzle Holder 51 mm in P/N DIAMETER 2.0 57911 66418 66416 66447 65445 66448 66433 63808 65060 63300 All kits include a case, the Product Instructions, and the Quick Start Guide. rpm SPEED SPEED RANGE 200 - 800 is a self-powered rotating nozzle that offers a polisher or unplugger head for cleaning a variety of process of process a variety head for cleaning or unplugger offers a polisher that nozzle rotating is a self-powered Rebuild kit allows five minute completeoverhaul of wear components right in the field Sapphirewith Use UHPX/UHPXi Series nozzles Series UHPXD Diamond Synthetic or Multiple nozzle holders are available so that the desired rotation speed can be maintained across a wide range of flowrates cleaning maximum and wear minimal for speed rotational controls system braking Magnetic Straight-pattern nozzles produce concentrated streams for more cleaning power than a fan tip fan a than power cleaning more for streams concentrated produce nozzles Straight-pattern MagDart™ X40 ‣ ‣ ‣ ‣ ‣ INLET CONNECTION* CONNECTION* INLET 9/16" HP Female9/16" ‣ ‣ ‣ ‣ ‣ TOOL KITS The lines. The tool rotates in a 360° pattern to provide maximum surface coverage and superior cleaning. and maximum surface coverage provide to in a 360° pattern rotates The tool lines. DrillJet

Two forward jets provide concentrated streams for powerful and effective unplugging and cleaning Rotors spin on a water bearing. No oil or ball bearings needed!

Rear thrusters propel the nozzle through tubes Two radial jets spin at high speed for complete coverage DrillJet

bar 1,500 PRESSURE MAX. OPERATING MAX. OPERATING psi 22,000 mm 39.1 39.1 72.9 50.8 59.2 LENGTH in ASSEMBLY 1.54 2.87 1.54 2.33 2.00 9.5 mm 13.0 18.0 24.0 33.0 in DIAMETER 0.70 1.25 0.37 0.50 0.90 lpm 17-30 27-38 45-95 30-53 45-190 FLOW RANGE gpm 4.5-8.0 7.0-10.0 8.0-14.0 12.0-25.0 12.0-49.0 INLET CONNECTION INLET 1/2” NPT, 1/2” BSPP MP 1/2” or 9/16” NPT, 1/2” M7, 1/16” NPT, 1/4” LH or 1/4” RH LH or 1/4” 1/4” NPT, 1/16” M7, 1/4” NPT, 1/4” BSPP, 9/16” LH or 9/16” RH LH or 9/16” 9/16” BSPP, 1/4” NPT, 1/4” 3/8” NPT, 3/8” BSPP, 9/16” LH or 9/16” RH LH or 9/16” 9/16” 3/8”3/8” BSPP, NPT, 1/8” NPT, 1/8” BSPP, 1/4” LH, 1/4” RH, 3/8” LH or LH, 3/8” 1/4” RH 1/4” BSPP, 1/8” NPT, 1/8” mm 12-16 15-25 28-51 22-33 38-60 TUBE ID RANGE in is a self-powered rotating nozzle used for removing deposits in tubes without the use of any external rotating rotating without the use of any external deposits in tubes used for removing nozzle rotating is a self-powered 0.87-1.30 1.10-2.00 0.47-0.63 0.60-1.00 1.50-2.40 Straight-pattern nozzles produce concentrated streams for more cleaning power than a fan tip fan a than power cleaning more for streams concentrated produce nozzles Straight-pattern DrillJet™ 18 13 24 33 9.5 ‣ SIZE (mm) SIZE ‣ components. It is assembled from three components: the nozzle body, internal rotor, and rear thruster. The inner rotor (with four The inner rotor thruster. and rear body, internal rotor, three components: the nozzle assembled from components. It is can be The nozzle rpms. the DrillJet, spins at ultra-high rotating component in radial), the only and two facing orifices - two front rigid or flexible lances. used with either The Tube Spinners

Tube cleaning nozzles (sold separately) provide Available in 9.5mm, 12.7mm, forward and rear jets for and 19.1mm diameters unplugging or thrust

Two radial jets spin at high speed for complete Sleeves spin on a water coverage bearing. No oil or ball bearings needed!

Nozzle body specially coated to ensure maximum lubricity and surface hardness

Hardened stainless steel sleeve extends orifice life and prevents galling Tube Spinners lpm 21.6 21.6 14.4 14.4 32.2 32.2 55.3 55.3 20,000 psi (1,379 bar) (1,379 5.7 5.7 3.8 3.8 8.5 8.5 14.6 14.6 gpm lpm 12.9 12.9 19.3 19.3 49.6 49.6 28.0 28.0 17,500 psi 17,500 (1,207 Bar) (1,207 7.4 7.4 5.1 5.1 3.4 3.4 13.1 13.1 gpm lpm 17.0 17.0 11.4 11.4 24.2 24.2 44.3 44.3 15,000 psi 15,000 (1,034 bar) (1,034 3.0 3.0 6.4 6.4 4.5 4.5 11.7 11.7 gpm lpm 14.8 14.8 10.2 10.2 39.0 39.0 20.8 20.8 (862 bar) 12,500 psi 12,500 2.7 2.7 3.9 3.9 5.5 5.5 10.3 10.3 gpm 8.7 8.7 lpm 17.0 17.0 12.5 12.5 33.3 33.3 (690 bar) 10,000 psi 10,000 2.3 2.3 4.5 4.5 8.8 8.8 3.3 3.3 gpm mm 55/65 55/65 65/76 65/76 90/102 90/102 90/102 90/102 LENGTH in (WITH HPF NOZZLE)**(WITH HPF 2.22/2.57 2.57/2.99 2.57/2.99 3.55/4.02 3.55/4.02 3.55/4.02 3.55/4.02 2.22/2.57 9.5 9.5 mm 19.1 19.1 19.1 19.1 12.7 12.7 OUTSIDE DIAMETER in .750 .750 .750 .750 .375 .375 .500 .500 INLET (FEMALE) CONNECTION 1/4" MP LH 1/4" 3/8" MP LH 1/4" MP RH 1/4" 3/8" MP RH 9/16" MP LH 9/16" 9/16" MP LH 9/16" 9/16" MP RH 9/16" 9/16" MP RH 9/16" provide the most thorough cleaning of tube walls. Maximum impact and the elimination of and the elimination Maximum impact of tube walls. cleaning the most thorough provide Nozzles Spinner Tube 2 2 1 1 1 1 1 1 NO. RATE FLOW HPFR/HPFL or HPER/HPEL tube cleaning nozzles are connected to the tube spinner nozzle to add forwardadd and/ortubes unplugging for jets to nozzle spinner tube the to connected are nozzles cleaning tube HPER/HPEL or HPFR/HPFL rearward jets to pull nozzles and flex lance through tube (sold separately) forwardno when rearwardor nozzles HPER/HPEL or HPFR/HPFL of place in installed arebe jets can below, sold blanks, nozzle HPFR/HPFL required nozzles cleaning tube standard as same the are diameters outside Spinner Tube Custom flowratesavailable for special applications A thin layer of water between the nozzle body and sleeve provides a liquid bearing on which the sleeve spins. No ball bearings to replace! to bearings ball No spins. sleeve the which on bearing liquid a provides sleeve and body nozzle the between water of layer thin A Self-rotating sleeve has two radial jets that spin at high speed for complete coverage complete for speed high at spin that jets radial two has sleeve Self-rotating surface and lubricity maximum for coated sleeve,specially steel body, stainless a and hardness, nozzle a features design piece two Simple hardened to extend orifice life and precision honedto prevent galling ‣ ‣ ‣ ‣ ‣ ‣ ‣ NO. PART ‣ ‣ ‣ ‣ ‣ ‣ ‣ 64217 64214 64215 64213 64218 64219 64216 64220 **MP connection uses HPFR/HPFL/HPER/HPEL cap nozzle. Lengths are HPFR and HPFL/HPER and HPEL respectively. SOLD SEPARATELY. SOLD respectively. HPEL and HPFL/HPER and HPFR are Lengths HPFR/HPFL/HPER/HPEL connection uses **MP nozzle. cap Jetstream Jetstream streaking result from having two larger spinning jets rather than several smaller non-rotating jets. smaller non-rotating several than jets rather two larger spinning having from streaking result ®

Jetstream products are also serviced by FS Solutions. With 14 convenient locations across the United States, FS Solutions provides high-performance parts, accessories, Jetstream rentals, repair, rebuild and safety training.

Gonzales, LA Highland, IN Lakewood, WA Toledo, OH (225) 647-0660 (219) 924-3180 (253) 584-0653 (888) 415-7368

LaPorte, TX Streator, IL Williston, ND Lexington, SC (281) 674-8668 (815) 672-6028 (701) 572-7421 (803) 996-0741

Leeds, AL Long Beach, CA New Brunswick, NJ Midland, TX (800) 822-8785 (866) 515-9891 (732) 448-7830 (432) 563-4450

Prairieville, LA Salt Lake City, UT (225) 372-7678 (800) 231-8192

P/N 67486 © 2019 Jetstream of Houston, LLC. All rights reserved.

Federal Signal Corporation is listed on the NYSE by the symbol FSS. Specifications and equipment listed are subject to change without notice. Some photos are shown with optional equipment.