Ford, New Holland

A brief history Joseph Coy from Michigan about Ford

Michigan is the birthplace of the modern automobile and Henry Ford was the first to perfect the modern assembly line. The 9N & 2N Ford tractors designed by Harry Ferguson were highly innovative, with other tractor manufacturers eventually adopting Ferguson's three Ford point hitchInc.® weight transfer system. New Holland New

Parts,

Customer Frederick E. Barr from Vermont Bob Schott from Washington submitted photos Tractor

Thanks for giving us your best shot! The following photos were submitted by folks just like you in our annual catalog photo contest. Our complete album can be viewed at www.steinertractor.com/ Brad Stachowaik from Michigan Christopher Hill from Michigan tractor-photo-winners View moreSteiner pictures and tractor stories at AntiqueTractorBlog.com

Robin Idso from Idsevegen, Norway

154 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Ford: Alphabetical index

We carry a wide variety B C D of tractor parts for Ford Brake parts Clutch, transmission parts Distributor parts cont... tractors. Whether you backing plate...... 220 alignment tool...... 207 points...... 189 want to repair or restore brake adj hole cover...... 220, 221 bearings...... 208, 209 primary conductor...... 187 your classic, we have disc brake ball...... 221 bearing spring...... 208 resistors...... 186 drum...... 221 boot...... 210 retainer...... 188 the tractor parts you dust shield...... 220 cable...... 209 retaining wire...... 186 need! felt seal...... 220 cap...... 208 rotor buttons...... 187 parking brake lever...... 221 control selector cover...... 210 spark plug wire sets...... 188 A repair kits...... 221 control selector lever...... 210 spark plugs...... 188 Air cleaners, parts screw...... 221 decal...... 209 spring clip...... 187 assys...... 201 seals...... 221 disc...... 207 Drawbars, parts bolt kit...... 201 shoes...... 220 drain plugs...... 208 assys...... 234 cap...... 203 springs...... 221 gasket...... 209 bolt kit...... 235 clamps...... 202 Bumper, part input shaft retainer...... 208 bracket...... 233 filter element...... 201 bolt kit...... 199 kits...... 207 bushing...... 233, 235 gasket...... 202 bumper...... 199 knobs...... 210 chain kit...... 235 New Holland hoses...... 202 levers...... 209 clevis...... 234

oil cups...... 201, 202 C oil filter...... 210 drawbars...... 235 Ford spring clip...... 202 Cab parts pin...... 209 eyelet assy kit...... 235 tubes...... 202 door strut...... 235 seal...... 208 Inc.®fork...... 234 vacuator valves...... 202 roof hatch strut...... 235 seal, bearing, gasket kit...... 209 gasket...... 234 Alternators, parts Camshaft, parts shift cover assys...... 209 hanger...... 235 alternators...... 191 camshaft...... 164 shifter plate...... 209 leveling box assys...... 234 bolt kit...... 191 gears...... 165 spring...... 209 leveling rod...... 234 bracket kits...... 191 lifter...... 165 throw out bearing carrier...... 208 lift arm support pin kit...... 234 conversion kits...... 191 wrench set...... 165 throw out bearings...... 207, 208 lift arms...... 234 pulleys...... 191 Caps torque limiter disc...... 210 lock...... 235 Ammeters...... 179 air cleaner...... 203 Countershafts...... 208 pins...... 234, 235 Axles, front, parts distributor...... 186, 187 Crankshafts, parts rockshaft arm...... 234 bushing...... 216 front hub...... 231 bearingsParts,...... 161, 162 safety chain...... 235 flange...... 216 fuel...... 204 crankshafts...... 161 stabilizer bar...... 235 front axles...... 215 oil fill / breather...... 165, 166 gears...... 161 stabilizer kit...... 235 pin...... 216 oil filler tube...... 166 pulleys...... 161 top links...... 233 support pins...... 215 power steering...... 214 seals...... 161 Axle, rear, parts pre cleaner...... 203 Cylinder heads, parts E axle shaft...... 222 PTO...... 229 cylinder heads...... 164 Electric outlet socket, parts clamp lock nut...... 222 radiator...... 175 stud...... 164 boot...... 183 gaskets...... 223 steering wheel...... 210 valve train kits...... 164 connector plug...... 183 nuts...... 222 transmission filler...... 208 valves...... 164 socket...... 183 paper gaskets / shims...... 222 Carburetors, parts Cylinder sleeve liners...... 160 Electrical resistor assys., parts rear axle nut & snap ring kit.... 222 adjustment needle assy...... 171 assys...... 190 rear hub assy...... 222 bushingTractor...... 171 D junction block...... 190 seals...... 223 carburetors...... 170 Dash light, parts resistor...... 190 shaft collar...... 223 discs...... 171 bulbs...... 195 Electronic ignition kits...... 189 shaft cone...... 223 elbow strainer assy...... 170 dash lights...... 195 Emblems / nameplates shaft cup...... 223 floats...... 172 Dash panel warning lights...... 179 bracket...... 198 snap ring...... 222 gaskets...... 171 Data plates...... 211 clip...... 198 studs...... 222 needle float valves...... 170 Decals...... 236, 237 emblems...... 198 washer...... 222 nozzles...... 171 Differential gaskets...... 222 Engine assy., break in lube...... 163 repair kits...... 172, 173 Dipsticks...... 167, 225 Engine gasket sets...... 163 B throttle shaft...... 171 Distributor parts Engine oil caps...... 165, 166 Base engine kits...... 161 venturi...... 171 bracket...... 186 Exhaust pipes...... 169 Battery cablesSteiner...... 183 Choke parts bushing & shim kit...... 187 Battery covers...... 183 cables...... 169 caps...... 186, 187 F Battery hold downs, parts knob...... 169 clips...... 187 Fan belts...... 178 bolts...... 184 rod...... 169 coils...... 186 Fan blades...... 178 hold downs...... 176, 184 Cigarette lighters...... 186 condenser...... 189 Fan shrouds, parts...... 177 retainer...... 184 Cluster gauges, parts covers...... 186 Fenders, parts rod...... 184 assemblies...... 182 distributors...... 187 assys...... 219 Battery trays...... 183, 184 cable...... 182 gasket kit...... 187 bolt kits...... 219 Boot...... 210 gasket...... 182 grommet...... 188 light brackets...... 219 Boots...... 215 sending unit...... 182 ignition tune up kits...... 189 switch...... 182 Insulator kit...... 187 Index continues on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 155 Ford: Alphabetical index cont...

F G H N Fenders, parts cont... Governors, parts cont... Hydraulic lift parts cont... Nosecones...... 200 painting mask kits...... 219 internal centrifugal assy...... 174 spring seat...... 224 hood top panel...... 200 rivet...... 219 repair kits...... 174 valve kits...... 224 skins...... 218, 219 springs...... 174 washer...... 224 O Flywheel ring gears...... 167 Grilles, parts Hydraulic pump parts Oil / breather caps...... 165 Fuel filters bottom grille sections...... 199 assembly...... 225 filter element...... 165 element...... 206 bumper kit...... 199 control valve assy...... 225 vent breather element...... 165 fuel filters...... 205, 206 grilles...... 199, 200 drive hub...... 226 vent breather gasket...... 166 glass bowl...... 206 mounting studs...... 199 drive hub adaptors...... 226 Oil fill tube cap...... 166 Fuel gauges...... 180 screen...... 199 drive shafts...... 226 Oil filters...... 166 Fuel injector...... 174 shell...... 199 rebuild kit...... 225 adapter kit...... 166 seal kit...... 174 spring...... 200 relief valve assy...... 225 conversion kit...... 166 Fuel lift pumps...... 174 stud and knob...... 199 safety valve assy...... 225 Oil pan parts Fuel lines, part top grille section...... 199 valve chamber assys...... 225 drain plug...... 166 lines...... 206 upper grille assy...... 199 drain plug screen...... 166 rubber bumper...... 206 I gaskets...... 166 Fuel sending units...... 181 H Ignition parts Oil pressure gauges, parts gaskets...... 181 Hand cranks...... 198 bracket...... 186 copper line kit...... 180 rings...... 181 Headlights, parts bushing & shim kit...... 187 fittings...... 180 Ford Fuel tanks, parts bezels...... 195 caps...... 186, 187 gaugesInc.®...... 179, 180

New Holland New caps...... 204 bracket...... 194 clips...... 187 Oil pump...... 167 liner kit...... 204 bulbs...... 194, 195 coils...... 186 Oil pump drive gear...... 167 screen...... 204 headlights...... 194, 195 condenser...... 189 Oil pump parts shut off alvesv ...... 204 reinforcement plate...... 194 covers...... 186 drive gear...... 167 tanks...... 204 rings...... 194, 195 distributors...... 187 oil pump...... 167 Fuse holder...... 186 washer...... 194, 195 dust cover...... 186 pickup tube...... 167 Hood, parts gasket kit...... 187 plunger...... 167 G air cleaner funnel assy...... 200 grommet...... 188 repair kits...... 167 Gauges air cleaner grille doors...... 200, 201 insulator kit...... 187 shafts...... 167 ammeter...... 179 bolt kits...... 200 points...... Parts,189 spring ...... 167 cluster gauges...... 182 bumpers...... 200, 201 primary conductor...... 187 fuel...... 180 door...... 200 resistors...... 186 P oil pressure...... 179, 180 door handle...... 200 retainer...... 188 Pinion seals...... 222 water temperature...... 180 door hinge...... 200 retaining wire...... 186 Piston pump, parts Gear shift boot...... 210 hinges...... 201 rotor buttons...... 187 bearing...... 228 Gear shift knobs...... 210 hood...... 200 spark plug wire sets...... 180, 188 changeover plate...... 227 Gear shift parts latch...... 201 spark plugs...... 188 cup...... 228 boot...... 210 latch assy...... 201 spring clip...... 187 gasket kit...... 227 decal...... 209 ornament...... 198 tune-up kits...... 189 gear housing...... 227 gaskets...... 209 screen...... 201 Ignition/key switches...... 193 hydraulic pump...... 227 knobs...... 210 screw kit...... 200 main drive gear...... 228 levers...... 209 side panelsTractor...... 200, 201 K manifold (lines)...... 227 pin...... 209 spring...... 201 Knobs...... 210 mounting gasket...... 228 shift cover assys...... 209 Hose clamps...... 177, 202 needle bearing assy...... 228 shifter plate...... 209 Hydraulic lift parts L O-ring kit...... 227 spring...... 209 block off plate...... 224 Light harness kits...... 185 oil seal...... 228 Gears cover repair gasket kits...... 225 Light switches...... 194 pistons...... 228 camshaft...... 165 cylinder...... 224 pressure tube nut assy...... 222 crankshaft...... 161 cylinder safety valve...... 224 M proof meter drive adapter shaft.... flywheel ring...... 167 draft control plunger...... 224 Manifolds, parts ...... 182 main drive...... 228 gasket...... 225 elbows...... 159 proof meter drive bolt...... 182 oil pump drive...... 167 hydraulic valve adaptor...... 224 gasket material...... 159, 164 proof meter drive bushing...... 183 steering gearSteiner sectors...... 212 lever control friction disc...... 225 gaskets...... 159 repair kits...... 227, 228 Generators, parts lever control friction plate...... 225 hardware...... 159 shaft...... 228 cut out assy...... 190 lift piston...... 224 manifolds...... 159 spring...... 228 generators...... 190 o-ring...... 224 washer kit...... 159 valve seat tools...... 227 pulleys...... 190 oil level dipsticks...... 225 Manuals...... 238, 239 wobble plate...... 228 tag...... 190 pin...... 224 Mufflers Piston ring sets...... 160 Glow plugs...... 189 quadrant stop kit...... 225 adaptor...... 169 Power steering parts Governors, parts ring kit...... 224 bracket...... 167 cap...... 214 assemblies...... 174 seat support...... 224 clamps...... 167, 168 cylinder end...... 214 gaskets...... 174 spring...... 228 heat shield...... 168 cylinders...... 214 governors...... 174 spring plate...... 225 mufflers...... 168, 169 filter...... 213

156 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm P S T T Power steering parts cont... Seats, parts cont... Tachometers, parts Transmission, clutch parts cont... O-ring...... 213 bushings...... 217 cables...... 183 bearings...... 208 pulley...... 213 coil...... 217 drive adaptor...... 182 boot...... 210 pumps...... 213, 214 hinge...... 217 drive assy...... 182 cable...... 209 seal & O-ring kit...... 213 pads...... 218 tachometers...... 182 cap...... 208 seal kit...... 214 pan repair kit...... 217 Tail lights, parts control selector cover...... 210 seals...... 213 pans...... 217, 218 brackets...... 197 control selector lever...... 210 Pre-cleaner parts retaining clip...... 217 bulbs...... 197 decal...... 209 bowls...... 203 shock absorbers...... 217 flasher unit...... 196 discs...... 207 caps...... 203 springs...... 217 gaskets...... 197 drain plugs...... 208 caps assys...... 203 support rod...... 217 lens...... 197 gasket...... 209 covers...... 203 Sediment bowl assys., parts...... 205 ring...... 197 input shaft retainer...... 208 PTO parts bail assys...... 204 tail lights...... 196 kits...... 207 bearings...... 229 bolts...... 205 Thermostats, parts knobs...... 210 caps...... 229 gaskets...... 204, 205 gaskets...... 177 levers...... 209

shafts...... 229 glass bowls...... 204, 205 thermostats...... 177 pin...... 209 New Holland gasket...... 229 sediment bowl assys...... 204, 205 Three point hitch, parts seal...... 208

knob...... 229 Sleeve & piston kits...... 160 bolt kit...... 235 seal, bearing, gasket kit...... 209 Ford over-running clutches...... 229 Spark plug wiring sets...... 188 bracket...... 233 shift cover assys...... 209 seals...... 229 Spark plugs...... 188 bushing...... 233, 235 Inc.®shifter plate...... 210 shifter support housing...... 229 Spindles, parts clevis...... 234 spring...... 209 Pushrod...... 164 bearing...... 216 drawbar chain kit...... 235 throw out bearing carrier...... 208 gasket...... 164 bushing...... 216 drawbars...... 234, 235 throw out bearings...... 207, 208 grommets...... 164 bushing kit...... 216 eyelet assy kit...... 235 torque limiter disc...... 210 seal...... 216 fork...... 234 Turbo chargers...... 159 R spindles...... 216 gasket...... 234 Radiators, parts Starter hand cranks...... 198 hanger...... 235 U bolt kit...... 175 Starters, parts leveling box assys...... 234 Umbrellas...... 237 caps...... 175, 176 covers...... 193 leveling rod...... 234 clamps...... 176 drives...... 192 lift armParts, support pin kit...... 234 V drain plug...... 175 glow plugs...... 192 lift arms...... 234 Valve cover gaskets...... 163 hood pad...... 175 key...... 193 lock...... 235 Valve cover stud grommets...... 163 hoses...... 176 repair studs...... 192 pins...... 234, 235 Valve grind gasket sets...... 163 mounting pad...... 175 starter solenoids...... 192 rockshaft arm...... 234 Valve train kits...... 164 radiators...... 175 starters...... 192 safety chain...... 235 Vane pump parts Radius rod parts switches...... 193 stabilizer bar...... 235 bearing...... 227 ball cap...... 214 tags...... 192 stabilizer kit...... 235 pressure plate...... 227 ball socket...... 214 Steering parts top links...... 233 rotor kits...... 227 Rear end overhaul gasket kits..... 222 assy...... 213 Throttle parts seal...... 227 Rims, rear & front bushing...... 213 grommet...... 207 shafts...... 227 bolts...... 233 bushings...... 211 lever...... 206 Voltage regulators...... 190 inner tube valves...... 231 columnTractor grommets...... 211 linkages ...... 207 nuts...... 231 - 233 gear boxes...... 213 plates...... 206 W rear rim bolt assys...... 232 gear sectors...... 212, 213 rod...... 207 Warning lights, parts...... 196 rear rim clamp...... 233 seals...... 212, 213 screw kit...... 206 Water pumps...... 178, 179 rims...... 231 - 233 sector hardware & seal kit...... 212 washer...... 206 Water temperature gauges...... 180 stops...... 233 sectors...... 212 Tie rods, parts adapter pipe...... 180 studs...... 232 shaft...... 212 assys...... 214, 215 Weight mounting wedge...... 233 washer...... 232 shaft bearing kits...... 212 boots...... 215 Wheels, front & rear Running boards, parts shafts...... 212 ends...... 214, 215 bearing kits...... 230 brackets...... 219 shim kit...... 212 Timing gear cover gaskets...... 165 front hub cap...... 231 hardware kit...... 219 top bearing steering shaft kit.212 Tires, tubes front wheel hub...... 230 runningSteiner boards...... 219 Steering wheels, parts nut...... 231 inner tube valves...... 231 supports...... 219 cap...... 210 tires...... 232 nuts...... 230, 231 center caps / emblems...... 211 tubes...... 232 seals...... 230 S cover...... 212 valves...... 231 studs...... 230, 232 Seats, parts nuts...... 210 Toolboxes...... 219, 220 wheels...... 231 - 233 adjustment handle...... 218 plates...... 211 Top-links, parts Wiring harness kits...... 184, 185 assy...... 218 spinner...... 211 pins...... 234 clips...... 185 bearing...... 218 spinners...... 211 Transmission, clutch parts...... 208 Work lights, parts bolt...... 217 steering wheels...... 210, 211 alignment tool...... 207 bulbs...... 196, 197 bumper...... 217 bearing...... 209 work lights...... 196, 197 bushing & pin kit...... 217 bearing spring...... 208 Wrist pin bushings...... 160

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 157 Ford: Beginning serial numbers

Fordson Super Major series 1961...... 08A-300001M 1962...... 08B-740000-A 1963...... 08C-781370-A 1964...... 08D-900000-A

9N, 2N, 8N 1953 - 1964 serial number location serial number location

9N, 2N, 8N serial and 1960...... 105943 1924...... 370331 engine numbers are 1961...... 131427 1925...... 453341 incorporated on left 1962...... 155531 1926...... 557509 hand side of engine 1927...... 645611 block. Series 2000 (4-cyl.), 1928...... 739581 4000 (4-cyl.), 6000 1929...... 747584 Model 9N 1962...... 1001 1930...... 757265 1939...... 1 1963...... 11948 1940...... 10234 1964...... 38931 Dexta serial number 1941...... 45976 stamped on left Ford 1942...... 89888 2000, 3000, 5000, hand clutch housing. Inc.® 1943...... 105412 6600, 7000 serial The engine number

New Holland New and model numbers is stamped on left Model 2N are stamped on hand side of block. 1942...... 99003 the upper right 1943...... 105375 front corner of the Fordson Dexta 1944...... 126538 transmission. Engine 1957...... 1 1945...... 169982 serial number is 1958...... 16066 1946...... 198731 stamped on left 1959...... 22427 1947...... 258504 or right pan rail of 1960...... 45216 block. 1961...... 72003 Parts, Model 8N 1947...... 1 6000 serial number is Fordson Super Dexta 1948...... 37908 located on left hand 1961...... 09A-312001-M 1949...... 141370 front side of trans 1962...... 09B-070000-M 1950...... 245637 housing. 1963...... 09C-731454-A 1951...... 343593 1964...... 09D-900000-A 1952...... 442035 8000, 9000 ID is located inside the Fordson Major Late Model NAA, radiator filler cap Diesel, Fordson 600, 700, 800, 900 access door. Power Major serial serial number is and engine numbers located on left hand Series 2000 (3-cyl.) - Tractorare stamped on side of transmission 9000 US Production left hand flywheel case at point of 1965...... C100000 housing or right side joining with starting 1966...... C124200 of engine block. motor. 1967...... C161300 1968...... C190200 Fordson Major diesel Model NAA 1969...... C226000 series 1953...... 1 1970...... C257600 1951...... 1217101 1954...... 77475 1971...... C292100 1952...... 1217104 1972...... C327200 1953...... 1247381 Series 600, 700, 800, 1973...... C367300 1954...... 1276857 900 1974...... C405200 1955...... 1322525 1954...... Steiner1 1975...... C450700 1956...... 1371418 1955...... 10615 1957...... 1412409 1956...... 77271 Fordson 1958...... 1458381 1957...... 116368 1917...... 1 1918...... 255 Fordson Power Series 601, 701, 801, 1919...... 34422 Major series 901 1920...... 91712 1958...... 1481091 1957...... 1001 1921...... 162667 1959...... 1494448 1958...... 11977 1922...... 199448 1960...... 1538065 1959...... 58312 1923...... 268433 1961...... 1583906

158 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Manifolds, parts Manifolds, parts cont... Part # USD Description / Application Part # USD Description / Application FDS001 $79.95 FDS076GK $8.50 Gasket fits: 2000, 2600, 3000, 3400, Manifold fits: 9N, 2N, 8N (1939-52) 3500, 3600, 4000, 4110, 4400, 4500, 4600 Replaces: 9N9425 3-cyl. gas, diesel (8000 - TW25 but must order 2), Replaces: C5NE9448A, FDS001GK3 $5.95 Gasket Set (For FDS001) USA made E8NN9448AA FDS233 $5.95 Manifold Nut & Washer Kit ABC448 $19.99 Exhaust Manifold Gasket Material (For FDS001), Replaces: 33816S, 34808S (1/16” thick x 12” wide x 28-1/2” NOTE: (4) Brass nuts (7/16”-20); long) USA made Yellow zinc plated lock washers NOTE: Perforated steel core. (7/16”). If only a single nut is needed order ABC1878.

FDS002B $129.99 Manifold fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. Turbo charger, part

gas series (1953-64) Renew the performance of your engine with our line of new New Holland Replaces: B9NN9425A aftermarket turbo chargers. This turbo charger has all new Ford FDS002GK $10.95 Gasket Set (For FDS002B) USA made components assembled in a state of the art factory that specializes in manufacturing turbo chargers. O.E.M. quality FDS1721 $7.95 Manifold Nut & Washer Kit Inc.® at an aftermarket USD - No core charge required. Includes (For FDS002B), Replaces: 34673S8, mounting gaskets and an installation sheet. This is a direct 33816S (7/16” - 20 UNF)

replacement for the listed applications. Engine parts NOTE: If only a single nut is needed order ABC1878. Part # USD Description / Application ABC1878 $1.75 Manifold Nut & Lockwasher ABC3690 $499.99 Turbo Charger (NEW not rebuilt) (For FDS001, FDS002B) w/ Mounting Gasket fits: TD70D, (7/16” - 20 UNF) NOTE: Brass nut, TD90D, TD95D, TN70, TN70A, yellow zinc lock washer. TN70D, TN70DA, TN70S, TN70SA, Parts,TN70VA, TN75, TN75D (All using Sold individually. Garret Air Research TA2505 turbo) FDS020 $19.95 Exhaust Elbow fits: Some NAA, Replaces: 99462782 NOTE: Does not fit Jubilee, 501, 600, 700, 2000 4-cyl. series Mitsubishi turbo. 1-5/8" (1953-64); Also fits some 800, 900 w/ FDS121 muffler, Replaces: NAA55250B ABC2511 $5.95 Turbocharger to Exhaust Manifold (1-5/8” O.D.) Mounting Gasket fits: 8630 - TW35 Replaces: D6NN6N640A FDS020GK $2.50 Exhaust Elbow to Manifold Gasket USA made NOTE: See website for (For FDS020 Elbow) USA made full applications. FDS021 $19.95 Exhaust Elbow fits: Some 601, 800, 900, 2" 1801, 2000, 4000 Tractor4-cyl. gas series (1954- 64) w/ FDS398 muffler Replaces: 310075 (2” O.D.) From a satisfied customer! FDS021GK $2.50 Exhaust Elbow to Manifold Gasket (For FDS021 Elbow) FDS094 $49.95 “There is nothing but positive things I can say Exhaust Manifold fits: Fordson Dexta, for my experience working with Elizabeth Super diesel (1957-64) w/ vertical and anyone else that I have dealt with at exhaust, Replaces: 957E-9430A Steiner. It is definitely a first class operation

FDS094GKSteiner $5.95 filled with top notch employees. Thank you Manifold Gasket Set fits: Dexta, Super Dexta (1957-64), Replaces: 957E9448 for everything your company does for tractor NOTE: Fits vertical or horizontal clubs and collectors throughout the country.” exhaust. - Gary A., President of the Central New York FDS076 $49.95 Exhaust Manifold fits: 2000, 3000, 3400, Antique Tractor Club 3500, 4000, 4110, 4400, 4500 (1965-74) (All 3-cyl. w/ gas, diesel & vertical exhaust), Replaces: C5NE9430E

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 159 Tips on ordering an engine piston ring set: Piston ring sets - USA made (unless noted) NOTE: Measure old rings before ordering.

Measure old rings before ordering. Do not order by tractor Part # USD Application model only. To ensure you order The following fit Some 2N, 8N, 9N 4-cyl. (1939-52) the correct rings, you will need FDS2088 $76.99 3-3/16" bore, (2) 0.093" compression rings, (1) 0.156" oil ring the following information: FDS2092 $98.99 3-3/16” bore, (2) 0.093” compression rings, (2) 0.187” oil rings The following fits Some NAA, 501, 600, 700, 2000 4-cyl. (1953-64) 1 Bore size ABC2072 $159.99 3-7/16" bore, (3) 0.093" compression rings, (2) 0.187" oil rings 2 Thickness of each ring NOTE: On some engines discard 1 compression & oil ring per cylinder. 3 Quantity of each ring The following fit Some Jubilee, NAA, 501, 600, 700, 2000 4-cyl. series gas, LP (1953-64) thickness per piston FDS2098 $78.99 3-1/2" overbore, (2) 0.093" compression rings, (1) 0.187" oil ring. NOTE: Not USA made Piston rings can not be returned if opened. Call or email for USD The following fits Some 800, 900, 4000 4-cyl. series gas, LP (1954-64) and availability of other sizes. FDS2100 $76.99 3.900" bore, (2) 0.093" compression rings, (1) 0.187" oil ring FDS2102 $149.99 4" overbore, (3) 0.093" compression rings, (1) 0.187" oil ring Ford Inc.® New Holland New

Piston wrist pin bushings Cylinder sleeve liners cont... NOTE: Sold individually. Requires reaming or boring after Part # USD Application installation. FDS4160 $29.95 Part # USD Application Fits: 2N, 8N, 9N (1939-52) FDS3716 $3.99 Replaces: 8N6055B Fits: 2N, 8N, 9N (1939-52) (.090” thick, 3.368” prefinished O.D., Replaces: 21A6207A3, 21A6207B3 Parts,3.187” bore) NOTE: Use w/ FDS2976 kit. (0.735” I.D., 0.810” O.D., 1.314” o/a length)

Engine parts FDS4655 $29.99 NEW! Fits: Jubilee, NAA, 501, 541, 600, FDS3722 $3.99 Fits: Jubilee, NAA, 501, 600, 601, 700, 701, 601, 611, 620, 621, 630, 631, 640, 641, 650, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 651, 660, 661, 671, 681, 700, 701, 741, 771, 4-cyl. (All w/ 4-cyl. gas, LP, diesel 1953- 2000 4-cyl., 2031, 2110 4-cyl., 2120 4-cyl., 64); 6000, 6100 6-cyl. gas, LP, diesel up to 2111, Replaces: EAE6055E 1967), Replaces: 500147, EAA6207A (3.500” overbore) (0.915” I.D., 0.973” O.D., 1.233” o/a length) FDS3769 $4.99 Fits: 2000 3-cyl., 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910,Tractor 4000 3-cyl., 4600, 4610, 5000, 5600, 5610, 5700, 6600, Sleeve & piston kits NOTE: Verify engine is sleeved prior 6700, 6710, 7810, 7910, 8000, 8600, 8700, to ordering. Each kits include sleeves, TW5, TW10, Industrials gas, LP, diesel aluminum pistons, piston ring sets, piston (1965-12/00 except compacts) pins & pin retainers. Most other sets are Replaces: C5NE6207A, 87840995 available by special order. (1.485” I.D., 1.630” O.D., 1.610” o/a length) Part # USD Application FDS3087 $319.95 Fits: Jubilee, NAA, 501, 600, 601, 700, 701, Steiner (2000 4-cyl.) gas w/ sleeved engine Cylinder sleeve liners (1953-64), Replaces: CPN6055A NOTE: Measure sleeve thickness before (3.500” overbore) ordering. This is a bare sleeve only. FDS3090 $309.99 Part # USD Application Fits: 800, 801, 900, 901, (4000 4-cyl.) gas FDS4156 $32.99 Fits: 2N, 8N, 9N (1939-52) w/ sleeved engine (1954-64) Replaces: C0NN6055B Replaces: FPN6055A (.040” thick, 3.268” prefinished O.D., (4” overbore) 3.187” bore) NOTE: Use w/ FDS2970 kit.

160 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Base engine kits Crankshafts, parts cont... NOTE: Each kit includes (4) sleeves, pistons, Part # USD Description / Application rings & wrist pins, locks, pin bushings & FDS2042 $51.99 complete gasket set w/ crankshaft seals. Crankshaft Gear fits: Jubilee, NAA, 501, Measure sleeve thickness before ordering. 600, 601, 700, 701, 800, 801, 900, 901, 2000 Order rod & main bearings separately. 4-cyl., 4000 4-cyl. series (1953-64) gas, diesel, Replaces: EAF6306B, 500223 Part # USD Application USA made NOTE: 21 teeth. FDS2970 $249.99 Fits: 9N, 2N, 8N (1939-52) ABC021 $34.95 Crankshaft Pulley fits: 9N, 2N, 8N (1939- (Standard 3.187” bore 3-ring pistons) 52), Replaces: 192160 NOTE: Includes NOTE: Includes (4) 0.040” thick sleeves. (4) 1/4” - 28 threaded holes for hub FDS2976 $249.99 Fits: 9N, 2N, 8N (1939-52) when used w/ front mounted loader. (Standard 3.187” bore 3-ring pistons) For drive hub order ABC1809. NOTE: Includes (4) 0.090” thick sleeves. ABC2058 $5.99 Front Crankshaft Seal fits: Jubilee - 4000 FDS3457 $399.99 Fits: Jubilee, NAA, 501, 600, 601, 700, 4-cyl. (1953-64), 6000 series (1961-67) 701, (2000 4-cyl.) series w / 134 C.I. Replaces: C0NN6700A

gas, LP (1953-64), Replaces: 309519, New Holland (1.875” I.D., 2.571” O.D., 0.312” wide) 309553, 309976, CPN6008H, CPN6055A, EAA6207A (3.500” overbore stepped FDS2412 $29.99 11-pc. Rear Crankshaft Seal Kit Ford head piston) NOTE: Governor seal not fits: Jubilee - 4000 4-cyl. (1953-64), 6000 included. series (1961-67),Inc.® Replaces: C0NN6701A, EBU6701A, 84186689, B3NN6336A, C0NN6336A USA made NOTE: Rubber. Engine parts Crankshafts, parts ABC3953 $5.99 Front Crankshaft Seal fits: Fordson Major NOTE: Bearings not included. (1952-9/54), Replaces: DKN6362A, E1ADKN6362A (2.500” I.D., 3.500” O.D., Part # USD Description / Application .438” wide) FDS207 $599.99 Crankshaft fits: 1710 (1983-86) ABC1998Parts, $8.99 Front Crankshaft Seal fits: 2000 3-cyl. - Replaces: SBA115256261 TW35 gas, LP, diesel (1965-90) Replaces: C5NN6700A, D5NN6700A, 87802755 (2.362” I.D., 3.268” O.D., 0.433” FDS231 $599.99 wide) NOTE: See website for full Crankshaft fits: 1910 (1983-86) applications. Replaces: SBA115256471 FDS3756 $10.99 Rear Crankshaft Seal fits: 2000, 3000, 4000, 5000, 7000, 8000, 9000, (2600 - FDS2038 $44.99 9600), (2610 - 8010), (TB80 - TB120), Crankshaft Gear fits: 9N, 2N, 8N (1939- (TM115 - TM190), (TS90 - TS115), (TW5 52), Replaces: 48-6306, 486306A, - TW35), Industrials (1965 - 2002) 48-6306A USA madeTractor NOTE: 22 teeth. Replaces: E5NN6701BA, 83955247 NOTE: See website for all applications.

Crankshaft bearings NOTE: Measure bearings before ordering, no returns if package has been opened. Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications.

Part # USD Description The following fit 2N, 8N, 9N w/ 120 C.I. flathead FDS2500Steiner $8.99 Standard Connecting Rod Bearing (For standard (2.095”) rod journal) FDS3987 $9.30 Connecting Rod Bearing (For 0.002” (2.093”) undersize rod journal) FDS2502 $9.99 Connecting Rod Bearing (For 0.010” (2.085”) undersize rod journal) FDS2504 $8.99 Connecting Rod Bearing (For 0.020” (2.075”) undersize rod journal) FDS2506 $8.99 Connecting Rod Bearing (For 0.030” (2.065”) undersize rod journal) FDS3982 $9.99 Connecting Rod Bearing (For 0.040” (2.055”) undersize rod journal) FDS2790 $46.99 Main Bearing Set (For standard (2.249”) main journal size) Crankshaft bearings continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 161 Crankshaft bearings cont... NOTE: Measure bearings before ordering, no returns if package has been opened. Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications.

Part # USD Description The following fit 2N, 8N, 9N w/ 120 C.I. flathead cont... FDS2792 $46.99 Main Bearing Set (For 0.010” (2.239”) undersize main journal) FDS2794 $46.99 Main Bearing Set (For 0.020” (2.229”) undersize main journal) FDS2796 $46.99 Main Bearing Set (For 0.030” (2.219”) undersize main journal) FDS2798 $46.99 Main Bearing Set (For 0.040” (2.209”) undersize main journal) The following fit NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl., gas, LP, diesel (through 1964); 6000 gas, LP, diesel (through 1967) FDS2508 $10.99 Standard Connecting Rod Bearing (For standard (2.298”) rod journal) FDS2510 $10.99 Connecting Rod Bearing (For 0.010” (2.288”) undersize rod journal) FDS2512 $10.99 Connecting Rod Bearing (For 0.020” (2.278”) undersize rod journal) FDS2514 $10.99 Connecting Rod Bearing (For 0.030” (2.268”) undersize rod journal) The following fit Jubilee - 4000 4-cyl. w/ 134, 144, 172, 192 C.I. 4-cyl. gas, LP, diesel engines (through 1964) Ford FDS2800 $45.99 Main Bearing Set (For (2.498”) standard main journal) Inc.®

New Holland New FDS2802 $45.99 Main Bearing Set (For 0.010” (2.488”) undersize main journal) FDS2804 $45.99 Main Bearing Set (For 0.020” (2.478”) undersize main journal) FDS2806 $45.99 Main Bearing Set (For 0.030” (2.468”) undersize main journal) FDS2808 $51.99 Main Bearing Set (For 0.040” (2.458”) undersize main journal) The following fit Dexta, Super Dexta w/ Perkins 3-cyl. 144, 152 C.I. gas, diesel ABC2888 $9.99 Standard Connecting Rod Bearing 3-cyl. Set (For standard (2.249”) rod journal) ABC2890 $9.99 Connecting Rod Bearing 3-cyl. Set (For 0.010” (2.239”) undersizeParts, rod journal) ABC2892 $9.99 Connecting Rod Bearings 3-cyl. Set (For 0.020” (2.229”) undersize rod journal)

Engine parts ABC2894 $9.99 Connecting Rod Bearing 3-cyl. Set (For 0.030” (2.219”) undersize rod journal) The following fit Dexta, Super Dexta NOTE: Thrust washer not included. ABC2898 $20.99 Main Bearing Set 3-cyl. (For standard (2.749”) main journal) ABC2900 $20.99 Main Bearing Set 3-cyl. (For 0.010” (2.739”) main journal) ABC2902 $20.99 Main Bearing Set 3-cyl. (For 0.020” (2.729”) main journal) ABC2904 $20.99 Main Bearing Set 3-cyl. (For 0.030” (2.719”) main journal) The following Fordson Dexta, Fordson Super Dexta w/ 144, 152, 165, 203 C.I. Perkins gas, diesel ABC2811 $6.99 Tractor 4-pc. Thrust Washer Set (Standard (0.122”) thick) ABC2813 $10.99 4-pc. Thrust Washer Set (Oversize (0.129”) thick) The following fit 2000 3-cyl. - 4610, 230A - 4500 Industrial w/ 158, 175, 192, 201 C.I. gas, diesel (1965 & up) FDS2810 $25.99 Connecting Rod Bearing Set (3-cyl.) (For (2.750”) standard rod journal) FDS2812 $25.99 Connecting Rod Bearing Set (3-cyl.) (For 0.010” (2.740”) undersize rod journal) FDS2814 $29.99 Connecting Rod Bearing Set (3-cyl.) (For 0.020” (2.730”) undersize rod journal) FDS2822 $61.99 Main Bearing Set (For (3.372”) standard main journal size) FDS2824 $61.99 Main Bearing Set (For 0.010” (3.362”) undersize main journal) FDS2826 $61.99SteinerMain Bearing Set (For 0.020” (3.352”) undersize main journal) The following fit 7810 - TW10 w/ 401 C.I. diesel FDS2816 $41.99 Standard Connecting Rod Bearing Set (6-cyl.) (For (2.750”) standard rod journal) FDS2818 $50.99 Connecting Rod Bearing Set (6-cyl.) (For 0.010” (2.740”) undersize rod journal) FDS2820 $58.99 Connecting Rod Bearing Set (6-cyl.) (For 0.020” (2.730”) undersize rod journal)

162 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Engine assy. & break-in lube Valve grind gaskets, parts cont... Contains a special additive to cover the wear Part # USD Description / Application surfaces that help prevent scoring & galling FDS430 $79.99 Valve Grind Gasket Set fits: 501, 600, during initial engine start up. Also contains 601, 700, 701, 800, 801, 900, 901 series, corrosion inhibitors to help prevent rust & 1801, 4000 series 4-cyl. gas (1954-64) pitting of surfaces & zinc for older engine valve (All w/ 134, 172, 192 C.I. 4-cyl. gas train protection. Use on bearings, camshafts, engines) NOTE: 4-1/8” bore or less. lifters, oil pumps, etc. (4 oz. bottle) USA made ABC2825 $41.99 Description Part # USD Valve Grind Gasket Set fits: Super Melling Engine Assembly & Break-In Lube..ABC3346...... $6.99 Dexta (4/1962-64) w/ A3-152 diesel NOTE: Not for use on cylinder wall or piston rings. Replaces: 960E6051

FDS3541 $25.99 Valve Grind Gasket Set (For 4.200” bore engines) fits: 2000 3-cyl., 3000, Engine gasket sets 3400, 3500, 3550 3-cyl. gas, diesel NOTE: Includes all gaskets & crankshaft seals for major (1965-75), Replaces: C7NN6051R, overhaul. 82845200, 82845204 (0.037” thick head New Holland Part # USD Application gasket) NOTE: Will not fit Dexta 2000 series w/ Perkins 152” engine Ford FDS1323 $32.99 Fits: 9N, 2N, 8N (1939-52) w/ front or side FDS3535 $29.99 Valve Grind Gasket Set (For 4.200” bore engines)Inc.® fits: 2310, 2600, mount distributors NOTE: Order front timing cover gasket separate. 2610, 2810, 2910, 3600, 3610, 3900, Industrials (1975 - 2/90) (All 3-cyl.) gas, diesel, Replaces: D3NN6051E, Engine parts FDS1327 $83.50 Fits: Jubilee, NAA, 600, 700, series gas, LP 82845204, 82845222 (0.037” thick head series (1953-57) (All w/ 134 C.I. engines gasket) NOTE: See website for all w/ 7/16” head bolts) NOTE: 4” bore applications. or less, Order ABC3969 governor seal FDS3702 $33.95 separate. Valve Grind Gasket Set (For 4.400” bore engines) fits the following diesels FDS3946 $79.99 (For 7/16” head bolts) fits: 800, 900 series Parts,from 1965 to 5/69: 4000 3-cyl., 4100, 4 cyl. gas, LP (1954-57) (All w/ 172 C.I. 4110, 4140, 4190, 4200, 4400, 4410, 4500 engines w/ 7/16” head bolts) Replaces: C7NN6051S, CFPN6008B NOTE: 4-1/8” bore or less. Order (0.037” thick head gasket, 9/16” head ABC3969 governor seal separate. bolts) FDS1325 $86.99 Fits: 501, 600, 601, 700, 701, 800, 801, 900, FDS3608 $34.75 Valve Grind Gasket Set (For 4.400” 901, 4000 4-cyl. gas, LP series (1954-64) bore engines) fits: 3230, 3430, 3910, (All w/ 134, 172, 192 C.I. 4-cyl. gas, LP 3930, (4000 3-cyl.), 4000 SU, (4110 engines w/ 1/2” head bolts) 3-cyl.), (4130 3-cyl.), 4330, 4340, 4400, NOTE: 4-1/8” bore or less. Order 4500, 4600, 4610, 4630, Industrials ABC3969 governor seal separate. (5/31/1969-89) (All w/ 3-cyl. Tractor non turbo gas, diesel), Replaces: D2NN6051B, 82845204, 87801653 (0.056” thick head gasket, 9/16” head Valve grind gaskets, parts bolts) NOTE: See website for all NOTE: Includes all gaskets required when replacing the applications. cylinder head. See website for all applications. FDS455 $13.95 Valve Cover Gasket fits: Jubilee, NAA,

Part # USD Description / Application 501, 600, 700, 800, 900, 1801, 2000, 4000 series 4-cyl. (1953-64) (All w/ 134, 172, FDS036VGK $26.95 Valve Grind Gasket Set fits: 9N, 2N, 192 C.I. gas engines) 8N (1939-52), Replaces: 7HA6521, Replaces: EAF6584C Steiner8BA6571 8N6051A, 9N9448, 9N6022 FDS1997 $7.85 Valve Cover Gasket fits: 2000 3-cyl., FDS453 $2.99 Valve Side Cover Gasket only 2600, 2610, 3000, 3600, 3610, 4000 3-cyl., 4600, 4610; Industrials: 230A, fits: 9N, 2N, 8N (1939-52) 340, 3400, 3500, 3550, 420, 4400, 4500, Replaces: 7HA6521 NOTE: 2 used per 515, etc. gas, LP, diesel (All 3-cyl. 1965 tractor; Sold individually. up to 5/31/87), Replaces: C7NN6584B, FDS425 $72.99 Valve Grind Gasket Set (For 7/16” 81817048 head bolts) fits: Jubilee, NAA, 501, 600, FDS1766 $5.99 Valve Cover Stud Grommets fits: NAA 700 series (1953-57), 2000 4-cyl. (All - 4000 4-cyl. (1953-64) gas, LP, diesel w/ 134 C.I. gas engine & 7/16” head Replaces: EAF6570A NOTE: 2 used bolts) (4” bore or less) per tractor; Sold in pairs.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 163 Make your own gasket with our Cylinder heads, parts gasket material. Made in the USA! NOTE: For valve train kits not listed please call. Gasket material - USA made Part # USD Description / Application NOTE: For making general purpose gaskets. Do not use for FDS036 $199.99 Cylinder Head fits: 9N, 2N, 8N (1939-52) high temperature applications. w/ front or side mounted distributors Part # USD Description / Application Replaces: 8N6050A ABC1830 $13.99 FDS406 $4.99 Stud (For FDS036) (7/16” dia. x 3” long Cork / Rubber Rollpack Gasket Material NC-NF) NOTE: Used for 15 of the 18 (1/16” thick x 12” wide x 24” long) studs per engine; Sold individually. FDS466 $164.99 ABC1835 $16.25 Valve Train Kit (For FDS036) fits: 9N, 2N, Cork / Rubber Rollpack Gasket Material 8N (1939-52) (All w/ rotating exhaust (3/32” thick x 12” wide x 24” long) valves) NOTE: Kit includes new valves, guides, guide clips, springs, locks, ABC1844 $15.99 retainers. Gasket Paper FDS080 $829.95 Cylinder Head w/ Guides fits: NAA, 501, (0.0160” thick x 18” wide x 98” long) 600, 601, 700, 701, 800, 801, 900, 901, 1811, 2000 4-cyl., 4000 4-cyl. (1953-64) (All w/ ABC1846 $22.99 134, 172, 192 C.I. 4-cyl. gas engines) Ford Gasket Paper Replaces: 310098, 310100,Inc.® D3JL6049B (0.0275” thick x 20” wide x 108” long) NOTE: Includes bushings for 7/16 & 1/2” New Holland New head bolts. Valves not included.

FDS464 $129.99 Valve Train Kit fits: Jubilee - 4000 4-cyl. (1953-64) (All w/ 134, 172, 192 C.I. 4-cyl. Pushrods, parts gas engines) NOTE: Kit includes new NOTE: Pushrods are sold individually. valves, guides, springs, locks. Does not include retainers. Part # USD Description / Application FDS4430 $6.99 NEW! Valve fits: Jubilee - 4000 4-cyl. FDS2394 $10.99 Push Rod fits: Jubilee, NAA, 501, 600, Parts, (Intake) (1953-64) (All w/ 134, 172, 192 C.I. 4-cyl. 601, 700, 701, 800, 801, 900, 901, 1801, gas engines)

Engine parts 2000 4-cyl., 4000 4-cyl. (1953-64), 6000 FDS4430: Replaces: 87041002, EBU6507A gas, LP, diesel, Replaces: EAA6565C, (5.090” long, 1.647” head dia, 0.342” stem EBP6565B, C0AE6565C, 500356 FDS4433 $11.99 dia.) (9.61” o/a length, 5/16” O.D.) (Exhaust) NOTE: Sold individually. If replacing FDS4433: Replaces: 87041001, EAF6505D 1/4” O.D. push rod, customer must (4.978” long, 1.510” head dia., 0.341” stem also order 87801302 rocker adjusting dia.) screw (not available from STP, Inc.). FDS3344 $99.95 See website for full applications. Valve Train Kit fits: 2000, 2600, 3000, 3600, 4000, 4600, 2610 - 4630 series, Industrials FDS3549 $6.99 Push Rod fits the followingTractor diesel 158- (1965 - 10/91) (All w/ 158, 175, 192, 201 401 C.I. engines: 2000 3-cyl., 2600, 2610, C.I. 3-cyl. gas, diesel) (Intake valve length: 2810, 2910, 3000, 3600, 3610, 4000 3-cyl., 5.74”, head dia.: 1.805”; Exhaust valve 4600, 4610, 5000, 5600, 5610, 6410, 6600, length: 5.74”, head dia.: 1.500”; Valve 6610, 6700, 6710, 6810, 7000, 7600, 7610, spring length: 2.208”) NOTE: See website 8000, 8600, 8700, 9000, 9600, 9700, (TW5 for all applications. - TW35), Industrials (8/1965 - 12/2000) Replaces: C5NE6567B, 81813399 (12.174” o/a length) NOTE: Sold Camshaft, parts individually. See website for all Part # USD Description / Application applications. Steiner FDS3305 $179.99 Camshaft w/ Hardware fits: 501 - 981, FDS1767 $6.99 Pushrod Side Cover Gasket 2000 4-cyl., 4000 4-cyl. (1955-64); Also fits: Jubilee - 4000 4-cyl. (1953-64) gas, fits Jubilee - 960 gas, LP (1953-55) when LP, diesel, Replaces: EAF6521D converted to later cam & gear w/ 5/16” dia. rear gear mounting bolts or using FDS1770 $5.69 Pushrod Side Cover Grommets FDS3310 gear, Replaces: EAF6250F, fits: Jubilee - 4000 4-cyl. (1953-64) gas, 310377, C0NN6251A, C0NN6251AGV LP, diesel, Replaces: CONN6589A NOTE: Includes snap ring for front cam NOTE: 3 used per tractor; Sold in sets gear, (4) 5/16”-18 bolts for rear gear & of three. Woodruff key.

164 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Camshaft, parts cont... Camshaft, parts cont... Part # USD Description / Application Part # USD Description / Application FDS2036 $74.99 Camshaft Gear (standard) fits: 9N, FDS3544 $7.95 Valve Lifter, Tappet fits: 2000 3-cyl., 2600, 2N, 8N (1939-52) (All w/ 4 bolt style 2610, 2810, 2910, 3000, 3600, 3610, 3910, aluminum cam gear) 4000 3-cyl., 4600, 4610, 5000, 5600, 5700, Replaces: 91A6256A, 7RA6256A 5900, 6700, 7600, 7610, 7700, 7710, 7810, USA made NOTE: Aluminum. 44 teeth. 8000, 8600, 8700, 9000, 9600, 9700, (TB90 - TS110), (TW5 - TW35), Industrials FDS2040 $44.95 Front Camshaft Gear (standard) (All w/ 158 - 401 C.I. diesel fits: Jubilee, NAA, 501, 600, 601, 700, 701, engines 8/1965-10/2000), Replaces: 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. E4HN6500AA, 83957729 (2.065” o/a series (1953-64) gas, diesel length, 0.988” barrel dia., 1.235” lifter Replaces: EAF6256M NOTE: 42 teeth. face O.D.) NOTE: Sold individually. Cast iron, press fit. Measure length before ordering as FDS3310 $54.50 Rear Camshaft Hydraulic Pump Drive early tractors used a longer lifter. Gear fits: Jubilee - 960 (1953-55) when For use w/ 12.17” long push rod. See converted to later cam & gear w/ 5/16” website for all applications. New Holland dia. mounting bolts (or using FDS3305 camshaft); 501 - 981, 2000 4-cyl., 4000 Ford 4-cyl. (1955-64) gas, LP, diesel Replaces: EAF907B, 500010 Oil fill / breather capsInc.® ((4) 5/16” bolt holes) NOTE: 33 teeth. Part # USD Description / Application Early tractors used 1/4” bolt holes. Bolts FDS257 $29.99 Engine parts on rear of camshaft w/ (4) 5/16” dia. 1-pc. Oil Fill / Breather Cap fits: 9N, bolts. Measure before ordering. 2N, 8N (1939-50) w/ front mounted FDS2431 $2.99 distributor, Replaces: 9N6766 Timing Gear Cover Gasket fits: 9N, 2N, NOTE: Exact of original. (8N up to SN: 263843) (1939 - early 1950) (All w/ front mount distributor) JDS500 $39.99 1-pc. Oil Fill / Breather Cap w/ Clip Replaces: 9N6020A USA made Parts,& Copper Filter Element fits: 8N SN: 247571 & up (1950-52) w/ side mounted FDS2435 $2.99 distributor, Replaces: 8N6766B Timing Gear Cover Gasket fits: 8N SN: (1-1/2” tall) USA made 263844 & up (Late 1950-52) (All w/ side NOTE: Restoration quality. E-coated mount distributor), Replaces: 8N6020C black. “Oil” stamped into top. Fits over USA made 1-1/2” pipe.

FDS2440 $2.99 ABC042 $12.99 Timing Gear Cover Gasket fits: Jubilee - Oil Fill / Breather Cap w/ Clip & Filter 4000 4-cyl. gas, LP, diesel (1953-64) Element fits: All Ford models (1939-64) Replaces: EAF6020B, F2NN6020AA, Replaces: 8N6766B (1-1/2” tall) 500046 USA madeTractor NOTE: Economy style.

ABC043 $14.89 Oil Fill / Breather Cap w/ Replaceable FDS3527 $13.99 Adjustable Valve Lifter, Tappet Filter Element fits: Late 8N, NAA, Jubilee, fits: 2N, 8N, 9N (1939-52) (All w/ 120 541, 600, 700, 800, 900, 1801, 2000 4-cyl., C.I. Flathead engine) (8 used) 4000 4-cyl. series (1950-64) gas, diesel Replaces: A0NN6500A Replaces: 310030 (cap), 8N6782A (filter NOTE: Sold individually. element) NOTE: Exact of original. ABC044 $5.99 FDS3726 $15.99 Adjustable Valve Lifter (Tappet) Wrench Set fits: 2N, 8N, 9N (1939-52) (All w/ Steineradjustable lifters), Replaces: 8N17045-A Filter Element only (For ABC043) (RH), 8N17046-A (LH) NOTE: Sold in RH/LH pairs. FDS374 $8.49 FDS3301 $9.95 Valve Lifter, Tappet fits: Jubilee - 981, Valve Cover Vent Breather Element 2000 4-cyl., 4000 4-cyl. (1953-64); 6000 fits: NAA, Jubilee, 541, 600, 700, 800, 900, Replaces: F3JL6500AA, EAA6500C, 1801, 2000 4-cyl., 4000 4-cyl. series (1953- EAA6500D, 500295 (0.498” O.D. stem, 64) gas, diesel, Replaces: EAF6866A 1.023” O.D. lifter face, 2.409” o/a length) NOTE: Sold individually. Oil fill / breather caps continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 165 Oil fill / breather caps cont... Oil pan parts cont... Part # USD Description / Application Part # USD Description / Application

FDS2437 $1.59 Valve Cover Vent Breather Gasket ABC2823 $13.95 fits: NAA - 4000 4-cyl. (1953-64) gas, diesel Oil Pan Gasket fits: Dexta, Super Dexta Replaces: EAF6863C, 500499 (1957-64) w/ Perkins 3-cyl. 144, 152 C.I. (2-3/4” O.D.) USA made gas, diesel, Replaces: 296225A1

FDS1392 $6.99 Oil Fill Cap w/ Gasket fits: 501 - 4000 FDS2001 $9.59 Oil Pan Gasket fits: 2000 3-cyl., 2600, 2610, 4-cyl. diesel (1958-64); 2000 - 7500 (1965- 2810, 2910, 3000, 3600, 3610, 4000 3-cyl., 86) gas, LP, diesel, Replaces: 310945, 4600, 4610; Industrials 230A - 555B, 3400, C5NE6766C, DONN6766A, 81823295 4400, 4500 (1965-90) (All 3-cyl. gas, LP, (2.325” O.D., 2.240” I.D., 2.005” tab to tab, diesel), Replaces: F0NN6710AA, 83990594 .450” tab width) NOTE: For the sheet metal oil pan only. FDS3367 $10.65 Oil Filler Tube Cap fits: 2000 3-cyl. - TW35 (1965-96), Replaces: D5NN6N609A, 83907851 (Expands from 1.165” O.D. - 1.275” O.D.) NOTE: Twist plug style. Oil filters See website for all applications. Part # USD Description / Application ABC045 $12.95 Ford Oil Filter w/ Gasket,Inc.® Cartridge Type New Holland New Oil pan parts fits: 9N, 2N, 8N (1939-52) Replaces: APN6731B Part # USD Description / Application (4-7/16” high, 3-23/32” O.D.) USA made FDS246 $27.50 Oil Pan Drain Plug Screen w/ Gasket fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, ABC047 $16.99 Oil Filter w/ Gasket, Cartridge Type 601, 700, 701, 800, 801, 900, 901, 1801, 2000, (For tractors which have not been 4000 4-cyl. series (1939-64) converted to spin-on type) fits: NAA, Replaces: 9N6730WG (plug screen), Jubilee, 501, 600, 800 series (1953-59) 8N6734 (gasket) Parts, Replaces: CPN6731B ABC292 $1.49 (4-13/16” high, 3-15/32” O.D.) USA made Engine parts Gasket only fits: Same as FDS246 ABC149 $8.79 Replaces: 8N6734 USA made Oil Filter w/ Gasket, Cartridge Style fits: Dexta, Super Dexta diesel (1957-64) Replaces: EPN6731B ABC4367 $4.99 (4-1/2” high, 2-29/32” O.D.) NEW! Oil Pan Drain Plug fits: 2000 3-cyl. - TW35, etc. (1970-2/90) ABC007 $10.75 Replaces: C9NN6730B (3/4” - 16 UNF) Oil Filter, Spin-On Type fits: 501, 600, 800, 900, 1801, 2000, 3000, 4000 series, 5000, Tractor 6000, 7000 - 7710 (1959-90) ABC1955 $1.99 Drain Plug Gasket / Washer fits: Same Replaces: C7NN6714A, C9NN6714A as ABC4367, Replaces: C9NN6734A, (5-13/32” high, 3-11/16” O.D.) USA made 81822148 (0.750” I.D., 0.058” thick, 0.973” NOTE: Spin on. O.D.) NOTE: Made of nylon. FDS1720 $34.95 Spin-On Oil Filter Adapter Kit fits: Jubilee, ABC540 $3.39 Washer / Gasket fits: 2000 3-cyl. - 5200 NAA, 600, 601, 800, 801, 2000 4-cyl., 4000 (1965-69) (All using 7/8” drain plug) 4-cyl. (1953-64) gas, LP, diesel except Replaces: EBU6734A (.875” I.D.) Offsets & Row-Crops USA made NOTE: Copper. Replaces: CPN6882A, C7NN6714A NOTE: Includes adapter plate, threaded FDS429 $17.95Steiner adapter, gasket, ABC007 filter. 7-pc. Oil Pan Gasket Set fits: 9N, 2N, 8N (1939-52) w/ 120 C.I. engine FDS3449 $39.95 Spin-On Oil Filter Adapter Kit Replaces: 9N6781 fits: 2000 3-cyl., 3000, 3400, 3500, 4000 FDS432 $9.59 3-cyl., 4400, 4500, 5000 (1965 - 10/1969) Oil Pan Gasket fits: NAA, Jubilee, 501, 600, gas, diesel, Replaces: 309825F 700, 800, 900, 1801, 2000, 4000 series 4-cyl. (5.987” O.D. plate) NOTE: Kit includes (1953-64) (All w/ 134, 172, 192 C.I. gas, adapter plate, threaded adapter, filter. diesel engine), Replaces: EAF6710B Decreases oil capacity by 1 quart.

166 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Oil pump parts, repair kits Part # USD Description / Application Engine oil level / dipsticks FDS366 $19.69 Oil Pump Relief Valve Plunger fits: 9N, 2N, 8N (1939-52) Part # USD Application Replaces: 01A6663 ABC049 $9.99 Fits: 9N, 2N, 8N (1939-52) NOTE: Helps to restore oil pressure. Replaces: B2NN6750A FDS364 $3.49 Oil Pump Relief Valve Spring ABC050 $9.99 Fits: NAA, Jubilee, 501, 600, 700, 800, 900, fits: 9N, 2N, 8N (1939-52) 1801, 2000 4-cyl., 4000 4-cyl. series (1953- Replaces: 9N6654 NOTE: Helps to restore oil pressure. 64) gas, Replaces: C0NN6750B FDS384 $64.99 Oil Pump Repair Kit (For 9/16” wide oil pump gears) fits: 9N, 2N, (8N up to SN: Flywheel ring gears 247570) (1939-50) & oil pump housing Part # USD Application 9N6603, Replaces: APN6600A, 9N6608A ABC070 $39.99 NOTE: Kit contains (2) 9/16” wide gears, main drive gear w/ shaft, bushing, Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, gasket. Check gear width before 601, 700, 701, 800, 801, 900, 901, 1801, 2000, New Holland 4000 4-cyl. series (1939-64) gas, diesel

ordering. Bushing must be sized to fit. Ford Replaces: 9N6384 NOTE: 134 teeth. FDS381 $64.99 Oil Pump Repair Kit (For .725” wide oil pump gears) fits: 8N SN: 247571 & up Inc.® (1950-52) & oil pump housing 8N6603 FDS3753 $34.95 Fits following diesels (1965-05): 2000, 3000, Replaces: APN6600B, 8N6608 USA made 4000, 5000, 7000, 8000, 9000, 2600 - 9600,

NOTE: Kit contains (2) .725” wide gears, 2610 - 8010, TB80 - TB120, TM115 - TM190, Engine parts main drive gear w/ shaft, bushing, TS90 - TS115, TW5 - TW35, Industrials; gasket. Check gear width before Also fits 5000 (6/1971-75) gas ordering. Bushing must be sized to fit. Replaces: C5NE6384A, E2NN6384AA, FDS481 $52.75 83949153 (14.630” I.D., 16.115” O.D., Oil Pump Pickup Tube w/ Plate 0.625” wide) NOTE: 128 teeth. fits: 9N, 2N, 8N (1939-52) Parts,See website for all applications. Replaces: 86604201, 8N6615, 9N6615

FDS4242 $9.99 Slotted Oil Pump Intermediate Drive Muffler clamps, bracket Shaft fits: Golden Jubilee, NAA, NAB, Part # USD Description / Application 600, 620, 630, 640, 650, 660, 700, 740, 800, FDS116 $12.99 Muffler Clamp Kit fits: 9N, 2N, 8N gas 820, 840, 850, 860, 900, 940, 950, 960 (1953 - 12/1954), Replaces: EAF66646B (1939-52), Replaces: CAPN5200A (.494” O.D., 3.328” length) NOTE: Fits NOTE: Kit includes (2) cast iron clamps, some early tractors using the gear type nuts, bolts, lock washers. oil pump w/ slotted drive. FDS463 $21.95 Rear Hanger Bracket fits: 9N, 2N, 8N FDS4248 $13.79 Hex Drive Oil Pump Intermediate Shaft (1939-52) w/ horizontal muffler Tractor Replaces: 9N5260 (1-3/4”) NOTE: Exact of fits: 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl. gas, LP, original. Fits FDS122, FDS3524 mufflers. diesel (1955-64) (All w/ hex drive oil ABC360 $9.95 Clamp fits: NAA, Jubilee, 501, 600, 700, pump), Replaces: EAF66646D Early 800, 900 series (1953-57) (.250” O.D., 3.860” length) USA made Replaces: NAA5270A (1-3/4”) FDS3542 $64.99 Oil Pump w/ Sump Screen fits: 2000 NOTE: Zinc plated. Fits pipe O.D. of 3-cyl., 2600, 2610, 2810, 2910, 3000, 3600, 1.725” - 1.825” range. 3610, 3910, 4000 3-cyl., 4600, 4610, 5000, ABC327 $9.95 Clamp fits: Some (501, 601, 701 diesel), 800, 5600, 5700, 5900, 6700, Industrials (1965 - 801, 900, 901, (4000 4-cyl.) (1958-64) w/ 8/1999) gas, diesel w/ 158, 175, 192, 201, 172 C.I. gas, diesel (2”) NOTE: Chrome. 233, 256 C.I. non-turbo engines Steiner Original style. Fits pipe O.D. of 1.850” - Replaces: E1NN6600DD, 81873261 2.000” range. NOTE: See website for all applications. ABC2519 $14.95 FDS3546 $29.99 Oil Pump Drive Gear w/ Shaft fits: 2000 Clamp fits: Same as ABC327 (2”) 3-cyl. - TW35, Industrials (1965 - 8/1999) NOTE: Stainless steel. Original style. gas, diesel w/ 158 - 401 C.I. engines Replaces: E9NN6A820AA, 87800008 ABC2625 $8.95 (4.169” o/a length, 1.722” gear dia.) Clamp fits: Same as ABC327 (2”) NOTE: 18 teeth. Accepts tach drive. See NOTE: Painted steel. Original style. website for all applications.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 167 Restoration quality mufflers cont... Economy muffler clamps USA made Part # USD Application FDS3534 $59.95 Fits: Some (501, 601, 701 diesel), 800, 801, Part # USD Dimensions 900, 901, 4000 4-cyl. (1958-64) w/ 172 C.I. ABC568 $2.99 (1-1/2” clamp) NOTE: Use w/ FDS319 gas, diesel (All w/ 2” inlet I.D.) exhaust pipe. Replaces: 310079 NOTE: Exact of original! Raised lettering reads “FOMOCO” & ABC570 $2.99 (1-5/8” clamp) NOTE: Use w/ FDS121 or “310079”. Measure inlet before ordering. FDS3529 muffler (1 end only), FDS124 FDS3534 dimensions: Inlet length: 2", Inlet exhaust pipe. I.D.: 2", Shell length: 13-1/2", Shell dia.: 3-1/2", ABC572 $2.99 (1-3/4” clamp) NOTE: Use w/ FDS121 or Outlet length: 1-1/2", Outlet O.D.: 1-7/8", FDS3529 muffler (1 end only), FDS449, Overall length: 18". Use w/ FDS021 elbow FDS450 exhaust pipes. (gas). If clamps are needed order ABC574, ABC574 $3.99 (1-7/8” clamp) NOTE: Use w/ FDS398 or ABC576, ABC327, ABC2519, or ABC2625. FDS3534 muffler - 1 end only. ABC576 $3.99 (2” clamp) NOTE: Use w/ FDS398 - 1 end only, FDS402, FDS404 mufflers. Economy mufflers - USA made ABC585 $5.99 (3” clamp) Part # USD Application Ford FDS122 $44.50 Fits: 9N, 2N, 8N gasInc.® (1939-52)

New Holland New Replaces: 8N5230 FDS122 dimensions: MUFFLER - Inlet length: Muffler heat shield 2-1/2", Inlet I.D.: 1-1/2", Shell length: 23", Shell Fits: NAA - 4000 4-cyl. gas, diesel dia.: 3-1/4", Outlet length = 8-1/2", Outlet O.D.: (1953-64), Replaces: NCA5290A 1-1/2", Overall length: 34"; EXHAUST PIPE - (25-3/4” long) Flared inlet, Vertical length: 15-1/2", Horizontal Description Part # USD length: 22", Outlet O.D. = 1-1/2". Welded 1-piece Muffler Heat Shield...... FDS2446...... $39.95 Parts,assembly - muffler & exhaust pipe. If clamp is needed order FDS116 & FDS463. FDS121 $24.95 Fits: Some NAA, Jubilee, 501, 600, 601, 700, Engine parts 701, early 800, early 900 series, 2000 4-cyl. (All w/ 1-5/8” inlet I.D.) (1953-64) Restoration quality mufflers Replaces: NAA5230E NOTE: Original look, baffled for original sound. FDS121 dimensions: Inlet length: 2-1/4", Inlet Part # USD Application I.D.: 1-5/8", Shell length: 13", Shell dia.: 3-1/4", Outlet length: 2-1/4", Outlet O.D.: 1-5/8", FDS3524 $89.99 Fits: 8N (1948-52); Serviceable for 2N, 9N Overall length: 17-1/2". Use w/ FDS020 elbow & (1939-47), Replaces: 8N5230 ABC360 or ABC572 clamps. NOTE: Exact of original for 8N! Raised lettering reads “FOMOCO”Tractor & “8N-5230” FDS398 $29.99 Fits: Some (501, 601, 701 diesel), 800, 801, 900, 901, 4000 4-cyl. (1958-64) w/ 172 C.I. FDS3524 dimensions: MUFFLER - Inlet gas, diesel (All w/ 2” inlet I.D.) length: 33-1/2", Inlet I.D.: 1-3/8", Shell length: Replaces: 310079 24", Shell dia.: 3", Outlet length = 9-1/2", Outlet O.D.: 1-5/8", Overall length: 66"; Welded FDS398 dimensions: Inlet length: 2", Inlet 1-piece assembly - muffler & exhaust pipe. I.D.: 2", Shell length: 13-1/2", Shell dia.: 3-1/2", Outlet length: 1-1/2", Outlet O.D.: 1-7/8", If clamp is needed order FDS116 & FDS463. Overall length: 18", Use w/ FDS021 elbow (gas). FDS3529 $59.95 Fits: Some NAA, Jubilee, 501, 600, 601, 700, If clamps are needed order ABC574, ABC576, 701, early 800, early 900 series, 2000 4-cyl. ABC327, ABC2519, or ABC2625. Steiner(All w/ 1-5/8” inlet I.D.) (1953-64) FDS402 $62.95 Fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500, Replaces: NAA5230E, 82800460 5000 gas, diesel 3-cyl. & 4-cyl. (1965-75) NOTE: Exact of original! Raised lettering (All w/ purchase of FDS399 muffler reads “FOMOCO” & “NAA 5320 E”. adapter if not equipped w/ an existing Measure inlet before ordering. adapter), Replaces: C5NN5230AR FDS3529 dimensions: Inlet length: 2-5/8", Inlet FDS402 dimensions: Inlet length: 5", Inlet I.D.: I.D.: 1-5/8", Shell length: 15-1/2", Shell dia.: 1-7/8", Shell length: 10-3/4", Shell dia.: 4" x 8", 3", Outlet length: 1-5/8", Outlet O.D.: 1-5/8", Outlet length: 13-1/4", Outlet O.D.: 2", Overall Overall length: 17-3/4". Use w/ FDS020 elbow length: 29", If raincap is needed order RCS005. & ABC360 or ABC572 clamps. If clamp is needed order ABC576.

168 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Economy mufflers - USA made cont... Raincaps Part # USD Application Part # USD Fits the following pipe O.D.: FDS404 $39.99 Fits: 2000, 2600, 3000, 3400, 3500, 3600, 4000, RCS016 $45.95 4400, 4500, 4600, 5000 gas, diesel 3-cyl. & (3-1/2” O.D.) USA made 4-cyl. (1965-84) (All w/ purchase of FDS399 NOTE: Chrome plated. muffler adapter if not equipped w/ an Restoration quality. existing adapter), Replaces: C7NN5230AB, C7NN5230AC, C7NN5230Z FDS404 dimensions: Inlet length: 4-1/2", Inlet RCS005 $10.99 I.D.: 1-7/8", Shell length: 17", Shell dia.: 5-1/2", Outlet length: 7-1/2", Outlet O.D.: 2", Overall (2” - 2-3/16” O.D.) length: 29", If raincap is needed order RCS005. NOTE: Painted. If clamp is needed order ABC576.

FDS399 $17.95 Muffler Adapter fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500, 5000 gas, diesel 3-cyl. &

4-cyl. (1965-75), Replaces: C3NN5255B New Holland NOTE: Does not fit 2600, 3600, 4600. Choke parts Ford FDS399 dimensions: Inlet length: 1-1/2", Inlet I.D.: 1-7/8", Shell length: 11-1/4", Outlet length: Part # USD DescriptionInc.® / Application 2-3/4", Outlet O.D.: 1-7/8", Overall length: 15-1/2" FDS266 $24.99 Choke Control Rod Assembly w/out Knob fits: 9N, 2N (1939-47) Engine parts Exhaust pipes - USA made Replaces: 9N9700 (29-1/2” length) Part # USD Description / Application NOTE: Pre-bent. FDS319 $27.95 Exhaust Pipe fits: Some NAA, Jubilee, 501, 600, 601, 700, 701, early 800, early FDS262 $4.99 900 series, 2000 4-cyl. w/ 134 & 172 C.I. Parts, Choke Knob fits: 9N, 2N, 8N, NAA, gas, 4 & 5 speed transmissions & Select- Jubilee, 501, 600, 700, 800, 900, 1801, O-Speed (1953-64), Replaces: NCA5255B 2000, 4000 4-cyl. series (1939-64) FDS319 dimensions: Length: 35", Inlet I.D.: Replaces: 9N9703 (10 - 32 thread) 1-1/2". Use w/ FDS124 tail pipe & FDS121 or NOTE: Aluminum. FDS3529 muffler.

FDS124 $35.99 Horizontal Tail Pipe fits: Some NAA, JDS718 $21.50 Jubilee, 501, 600, 601, 700, 701, 2000 series w/ 134 C.I. gas, Early 800 w/ 172 Metal Sheathed Choke Cable C.I. gas (1953-64) (All w/ 4 or 5 speed fits: Tractors, Forklift & other transmission), Replaces:Tractor NCA5263B applications using 47” or less cable NOTE: Metal sheathed w/ “CHOKE” FDS124 dimensions: 1-1/2" Inlet I.D., on plastic knob. Cut to length. 54" length, 1-1/2" Outlet I.D. Use w/ FDS319 exhaust pipe & FDS121 or FDS3529 muffler. ABC423 $9.95 FDS450 $26.50 Exhaust Pipe fits: Some 800, 801, 1801, Universal Choke Cable fits: Tractors, 4000 4-cyl. w/ 172 C.I. gas (1958-64) Forklifts & other applications using 72” Replaces: 311051 or less cable (72” long) NOTE: Metal FDS450 dimensions: 1-3/4" Inlet I.D., sheathed. Cut to length. Can also 24" vertical length, 29" horizontal length. Use be used as a ‘Stop’ cable for diesel Steinerw/ FDS449 horizontal tail pipe & FDS398 or engines. FDS3534 muffler. FDS449 $39.99 Horizontal Tail Pipe fits: Some 800, 801, ABC3210 $16.50 1801, 4000 4-cyl. w/ 172 C.I. gas (1958- Universal Engine Stop Cable (Diesel 64) (All w/ 4 or 5 speed transmission) Fuel Shut Off) fits: Tractors, Forklifts Replaces: 311050 & other applications using 96” or less FDS449 dimensions: 1-3/4" Inlet I.D., cable NOTE: Knob is imprinted w/ 60" length, 1-3/4" Outlet I.D. Use w/ FDS450 STOP. Nylon sheathed. Cut to length. exhaust pipe & FDS398 or FDS3534 muffler.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 169 Carburetors, parts Carburetors, parts cont... Can't find your carburetor number? Look on page 392A. Part # USD Description / Application Carburetors are limited to replacement only - NO refunds. FDS3440 $449.95 Carburetor (NEW Zenith, not Rebuilt) No replacement will be given if dirt, rust, etc. is found in the fits: 2000 3-cyl., 2100, 2110, 2120, 2150, carburetor or if it has been taken apart. 2300, 2310, 2600, 2610, 2810, 2910, 230A, Part # USD Description / Application 231, 234 (1965-82) (All 3-cyl. w/ 158 C.I. FDS018 $156.95 engine), Replaces: E1NN9510AA; Zenith Carburetor (NEW, not Rebuilt) 13913; Holley LIST2923-2, LIST2923-3, fits: 9N, 2N, 8N (1939-52) LIST3012-2, LIST3013-2, R2923A, R2923- Replaces: Marvel Schebler TSX 33, 1A, R3012, R3012-3A, R3013-2, R3013- 241A,B,C NOTE: Fits flathead engines 4A, R3013-4F, R3158, R3589B, R3655A, only. Does not fit overhead valve R3656A, R4099, R4119-A, R4119-1A, engines. R4120-A, R7867, R8552 (2-11/16” c.c. FDS1178 $239.99 mounting studs, 1/8” NPT fuel inlet Carburetor (NEW, not Rebuilt) w/ 5/16” tube adapter) USA made fits: NAA, Jubilee (1953-54) w/ 134 C.I. FDS3445 $469.99 Carburetor (NEW Zenith, not Rebuilt) engine, Replaces: EAE9510A, EAE9510C, fits: 3000, 3400, 3500, 3600, 3610 (1965-82) B2NN9510A, Marvel Schebler TSX 428 (All w/ 158, 175 C.I. engines), Replaces: (2-1/4” c.c. mounting bolt pattern, E1NN9510BA; Zenith 13914; Holley

Ford 1/8” NPT fuel inlet) LIST6852, R3013-3,Inc.® R4100, R4120, R4120-

New Holland New FDS1183 $239.99 1, R6863, R7893, R7896, R8553 (2-11/16” Carburetor (NEW, not Rebuilt) c.c. mounting studs, 1/8” NPT fuel inlet fits: 600, 700 (1954-57) w/ 134 C.I. engine w/ 5/16” tube adapter) USA made Replaces: EAE9510D, B4NN9510A, FDS3450 $479.95 Marvel Schebler TSX 580 Carburetor (NEW Zenith, not Rebuilt) (2-1/4”c.c. mounting studs, fits: 4000 3-cyl., 4100, 4110, 4140, 4200, 3/8” fuel inlet threads) 4400, 4500, 4600, 4610, 515 - 555B (1965- 82) (All 3-cyl. w/ 201 C.I. engines) FDS1195 $239.99 Replaces: C5NN9510N, C9NN9510C, Carburetor (NEW, not Rebuilt) fits: 501, Parts,E1NN9510CA; Zenith 13912; Holley 601, 701, 2000 4-cyl. (1957-64) w/ 134 R3210, R3657, R3658, R3658A, R4101, C.I. engine, Replaces: 310746, 312954, Engine parts R4111, R4111-1A, R6852, R8554 (2-11/16” B8NN9510A, Marvel Schebler TSX 692, c.c. mounting studs, 1/8” NPT fuel inlet 765 (2-3/8” c.c. mounting studs) w/ 5/16” tube adapter) USA made ABC297 $7.99 FDS3578 $359.99 Carburetor (NEW, not Rebuilt) Carburetor Fuel Inlet Elbow & Strainer fits: 800, 801, 900, 901 series, 4000 4-cyl. Assy. fits: 9N, 2N, 8N, NAA, Jubilee (1954-64) w/ 172 C.I. engine (1939-54) gas, Replaces: 9N9553 (Male Replaces: C0NN9510G, Marvel end (screen end) - 1/8” pipe thread; Schebler TSX 662, 769, 813 (2-11/16” c.c. female end - 1/4” flare) NOTE: Must mounting bolt pattern,Tractor 7/16” fuel inlet have internal threads. Used w/ flare threads) fitting not compression fitting. FDS3507 $399.99 Carburetor (NEW Zenith, not Rebuilt) ABC230 $7.49 VITON Needle Float Valve (For Marvel fits: Early 801, 901 series (All up to SN: Schebler carburetors) fits: 9N, 2N, 8N, 126524) (1957-60), Replaces: B8NN9510B, NAA, Jubilee, 600, 700 series (1939-57) B9NN9510B, 312955, Zenith 13881; (All w/ TSX 33, 38, 83, 92, 241A,B,C, 420, Marvel Schebler TSX 769 428, 500, 534, 551, 580, 593 & w/ 120, 134 (2-11/16” c.c. carb mounting studs, 3/8” C.I. engines), Replaces: C3NN9564A, fuel inlet threads) USA made Marvel Schebler 233-536 (.080” orifice) NOTE: Will look different, but works USA made NOTE: Viton needle & seat Steinergreat! helps stop carb flooding. FDS3515 $379.95 Carburetor (NEW Zenith, not Rebuilt) ABC133 $7.49 VITON Needle Float Valve (For Marvel fits: 801, 901 both SN: 126525 & up, Schebler carburetors) fits: Some 601, 701 1801, 4000 4-cyl. series (1960-64) both w/ TSX 692, 765; 800, 900, 2000, Replaces: C0NN9510C, C0NN9510G; 4000 4-cyl. series (1954-64) (All w/ TSX Zenith 13875; Marvel Schebler TSX 813 662, 706, 769, 771, 813, 977), Replaces: (2-3/4” c.c. carb mounting studs, 7/16” C3NN9D532A, Marvel Schebler 233- fuel inlet threads) USA made 543, 233-595 (0.100” orifice) USA made NOTE: Will look different, but works NOTE: Viton needle & seat helps stop great! carburetor flooding.

170 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetors, parts cont... Carburetors, parts cont... Part # USD Description / Application Part # USD Description / Application ABC562 $27.50 Main Load Adjusting Needle Assy. ABC4318 $18.99 NEW! Choke Butterfly Disc w/ ‘T’ Style Handle (For Marvel fits: 800, 801, 900, 901, 1801, (4000 4-cyl. Schebler carburetors) fits: 801, 901, 1954-64) (All w/ TSX 662, 769, 813) 1801, 4000 4-cyl. (1957-64) (All w/ TSX Replaces: 311607 662, 769, 774, 813), Replaces: 311605, (1.853” O.D. across the flats) C3NN9G504A, Marvel Schebler 43-722 ABC1167 $10.69 Venturi (For Marvel Schebler (3/8”-24 UNF) carburetors) fits: 9N, 2N, 8N (1939-52) ABC564 $27.50 Main Jet Adjustment Needle Assembly (All w/ TSX 33, 38, 83, 241A, B, C, 420) (For Zenith carburetor) fits: Some NAA, Replaces: 9N9586, C5NN9586B, Marvel Jubilee, 600 series (1953-57) w/ carb Schebler 46-467 (11/16” dia. throat) 13876, Replaces: Zenith 71-21 NOTE: Plastic. (3/8”-24 thread) USA made ABC1152 $13.99 Main Nozzle (For Marvel Schebler

carburetors) fits: 9N, 2N, 8N (1939-52) New Holland w/ TSX 33, 38, 83, 241A,B,C, 420 Carburetor gaskets Replaces: 9N9530, Marvel Schebler Ford 47-180 Part # USD DescriptionInc.® / Application ABC1156 $23.95 Main Carburetor Nozzle (For Marvel ABC408 $1.39 Manifold to Carburetor Gasket Schebler carburetors) fits: NAA, 600, 700 fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,

(1953-57) (All w/ TSX428, 500, 577, 580) Engine parts 700 (1939-62) (All w/ TSX 33, 38, 83, Replaces: Serviceable for 312949, 241A,B,C, 420, 428, 500, 580) EAE9530A, Marvel Schebler 47-270 Replaces: 9N9447 (2-3/8” - 2-7/16” ABC557 $29.95 Main Carburetor Nozzle (For Zenith slotted bolt holes, 1-1/8” center hole) carburetors) fits: 9N, 2N, 8N (1939-52) USA made (All w/ carb 10850, 11850) ABC416 $1.39 Manifold to Carburetor Gasket fits: 601, Replaces: Zenith C66-47-50 USA made Parts,701, some 800, some 900, 2000 4-cyl. FDS1353 $35.50 Throttle Shaft (For Holley carburetors) (All w/ TSX 551, 577, 593, 692, 706, 765, fits: 2000 3-cyl. - 555B (1965-82) 771); 134 C.I. (1958-64), 172 C.I. (1954-64) Replaces: C5NE9581A Replaces: EAF9447B (2-3/8” c.c. bolt holes, 1-5/16” center hole) ABC513 $2.69 Throttle Body Repair Bushing (For small ABC424 $1.59 Manifold to Carburetor Gasket fits: 801, bowl Marvel Schebler carburetors) 901, 4000 4-cyl. series (1957-64) (All w/ fits: 9N - (Early 900 w/ TSX 593, 706) TSX 662, 769, 813, 966, 970, 972, 973, 977, (1939-57) (0.247” I.D., 0.383” O.D., 0.501” 988, 989), Replaces: C5NE9447A length) USA made NOTE: Repairs worn (2-11/16” c.c. bolt holes, 1-1/2” center throttle body using 1/4” throttle shafts. hole) NOTE: Perforated steel core. Must ream to size.Tractor ABC3233 $3.95 Carburetor Gasket Kit (For small bowl ABC1159 $4.99 Throttle Disc (For Marvel Schebler Marvel Schebler carburetors) fits: 9N, carburetors) fits: 9N, 2N, 8N, NAA, 600, 2N, 8N (All w/ TSX 33, 241A, B, C, 420); 700 (1939-57) (All w/ TSX 33, 241B, 428, NAA, Jubilee both w/ TSX 428; 600, 700 500, 580), Replaces: 9N9585, 14-175 both w/ TSX 500, 577, 580, 692, 765; 800 (15 degrees, 1.105” O.D.) USA made w/ TSX 551, 593, 706, 771; 900 w/ TSX NOTE: Steel. 551, 593, 706; 2000 4-cyl. w/ TSX 500, ABC1182 $18.95 Choke Disc (For Marvel Schebler 577, 580, 692, 765, 976; Power Units w/ carburetors) fits: 9N, 2N, 8N, NAA, 600, TSX 38, 83, 420, 534, 577, 771, 971, 976, Steiner700 (1939-57) (All w/ TSX 33, 241A, B, 987, 996 (1939-64), Replaces: 9N9502 C, 420, 428, 500, 580), Replaces: 9N9549, (4-5/16” o/a bowl gasket length) Marvel Schebler 27-530, 27-539 USA made (1-5/16” O.D.) NOTE: Galvanized steel. ABC2275 $3.95 Carburetor Gasket Kit (For Big Bowl ABC1171 $29.95 Choke Disc (For Marvel Schebler Marvel Scheblers) fits: Some800 - 4000 carburetors) fits: 501, 601, 701 (1957-62); 4-cyl. series (1954-64) (All w/ TSX 662, 800, 900 (1955-57); 2000 4-cyl. (All w/ 769, 813, 844, 884, 966, 970, 972, 973, 977, TSX 534, 551, 577, 593, 692, 706, 771) 988, 989, 993, 994, 997, 998) Replaces: EAF9549B, 312952, Marvel Replaces: EAE9502 (5” bowl gasket Schebler 27-573 (1-3/8” O.D.) length) USA made

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 171 Carburetor floats Carburetor floats cont... Part # USD Application Part # USD Application ABC036 $13.99 (For small bowl Marvel Schebler ABC452 $24.99 9N 2N 8N NAA carburetors) fits: , , , , (For Zenith carburetors) fits: 800, 2000 Jubilee 501 600 700 , , , w/ 134 C.I. gas 3-cyl., 3000, 4000 3-cyl., 5000, 6000 Early 800 900 engine; , 4-cyl. series w/ 172 (1954-82) (All w/ carb 12471, 12472, 12902, C.I. gas engine (1939-57) (All w/ TSX 33, 13875, 13881, 13912, 13913, 13914, 13958, 241A, B, C, 428, 500, 551, 580, 593, 692, 13960, 13961); Power Units w/ carb Power Units 706, 765); w/ TSX 38, 83, 420, 13915, 13916, 13917, 13920 534, 577, 771, 971, 976, 987, 996 , Replaces: Replaces: Zenith C85-115S 9N9550A, Marvel Schebler 30-600 ABC037 $19.95 (For Marvel Schebler carburetors) fits: 800 w/ TSX 801, 901; 1801 series, 4000 (1958- ABC1352 $49.50 (For Holley carburetors) fits: 2000 3-cyl. 64) (All w/ TSX 662, 769, 813, 977); Power - 6600 (1965-82); Also fits Holley carbs Units w/ TSX 966, 972, 973, 988, 989, 993, R2923-1A, R3210, R3589B, R3657, R3658, 994, 997, 998, Replaces: 311608, Marvel R3658A, R4111, R4119, R4119A, R4120, Schebler 30-631, 30-739, Zenith C85-156 R4120-1, R6852, R6853, R7867, R7896, ABC190 $16.99 (For Zenith carburetors) fits: 9N, 2N, 8N, R8552, R8553, R8554 NAA, 600, 700, 800, 900 (1939-57) Ford Replaces: C5NE9550A, 81810964 (All w/ carb 10850, 11850, 12492, 12493, Inc.® NOTE: See website for complete New Holland New 12522, 13876, 13878, 13879, 13880) application listing. Replaces: Zenith C85-28

Carburetor repair kits Carburetor repair kits cont... Can't find your carburetor number? Look on page 392A. Part # USD Description / Application Economy Carburetor Repair Kits - USA made cont... Economy carburetor repair kits include needle & seat (unless noted), float lever pin, seal, gaskets & instructions. ABC1349Parts, $24.95 Economy Carburetor Repair Kit

Engine parts Complete carburetor repair kits include choke & throttle (For Zenith carburetors) fits: 800, 4000 shafts, needle & seat (unless noted), float lever pin, (1954-64) both w/ carb 12471, 13875; 6000 miscellaneous plugs & screws, throttle shaft seals, adjustment (1961-66) w/ carb 12902, Replaces: Zenith screw & gaskets. K2048, K2049, K2050, K2136

Premium carburetor repair kits include throttle shaft, throttle FDS212 $23.95 plate, choke shaft, choke plate, throttle shaft bushings and packing, metering nozzle, brass plugs, float pin, needle & seat, Economy Carburetor Repair Kit drain petcock, gaskets, fuel strainer & more. (For Marvel Schebler carburetors) Tractor fits: 800, 900, 1801, 4000 4-cyl. series, Part # USD Description / Application (1954-64), Power Units (All w/ TSX 844, Economy Carburetor Repair Kits - USA made 884, 966, 972, 973, 988, 989, 993, 994, 997, 998) ABC220 $24.50 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) fits: 9N, 2N, 8N (All w/ TSX 33, 241A,B,C, ABC1344 $22.95 420); NAA, Jubilee both w/ TSX 428; 600, Economy Carburetor Repair Kit 700 both w/ TSX 500, 577, 580, 692, 765; (For Marvel Schebler carburetors) 800 w/ TSX 551, 593, 706, 771; 900 w/ fits: 800, 900, (1954-57), Power Units TSX 551, 593, 706; 2000 4-cyl. (1939-64) (All w/ TSX 662, 769, 813, 966, 970, 972, Steinerw/ TSX 500, 577, 580, 692, 765, 976; 973, 977, 988, 989, 997, 998) Power Units w/ TSX 38, 83, 420, 534, 577, 771, 971, 976, 987, 996 FDS1347 $36.99 Economy Carburetor Repair Kit ABC1346 $26.95 Economy Carburetor Repair Kit (For Zenith carburetors) fits: 2000, 2600, (For Zenith carburetors) fits: 9N, 2N, 8N, 3000, 3400, 3500, 3600, 4000, 4100, 4400, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 4500, 4600, 5000 (All w/ 3 cyl., 1965-82) 801, 900, 901, 2000 4-cyl., 4000 4-cyl. (All w/ carb 13912, 13913, 13914, 13915, (1939-64) All w/ carb 9544, 10850, 11294, 13916, 13917, 13920) NOTE: Fits 267 11850, A, 12492, 12493, 12494, 12544, series Zenith carbs. 12566, 13876, 13877, 13878, 13879, 13880

172 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetor repair kits cont... Carburetor repair kits cont... Part # USD Description / Application Part # USD Description / Application

Economy Carburetor Repair Kits - USA made cont... Complete Carburetor Repair Kits cont...

ABC427 $36.95 Economy Carburetor Repair Kit ABC215 $49.99 Complete Carburetor Repair Kit (For Holley carburetors) fits: 2000 (For Marvel Schebler carburetors) 3-cyl. - 5100 (1965-82) (All w/ Holley fits: 801, 901, 1801, 4000 series (1957-64) R3158A, R3589B, R3655A, R3656A, w/ 172 C.I. gas engine (All w/ TSX 662, R3657, R3657A, R3658, R3658-1AR4111, 769, 813) NOTE: Our ABC215 is the only R4111-1A, 4111A, R4119, R4119-1A, complete kit on the market as others R4119A, R4120, R4120-1, LIST6852, R6852, market a basic kit as a complete kit. R6852-A, R6853, R6863, R6863-A, R7867, Premium Carburetor Repair Kits R7896, R8552, R8553, R8554) NOTE: Includes repair components for FDS3586 $62.99 acceleration pump, piston assembly, Premium Carburetor Repair Kit spring, retainer. Float valve seat not (For Marvel Schebler carburetors) included.

fits: 9N, 2N, 8N (1939-52) w/ TSX 33, New Holland ABC1918 $36.95 Economy Carburetor Kit 241,A,B,C, 420 (For Holley carburetors) fits: 2000 Ford 3-cyl. - 5200 (1965-82) (All w/ Holley FDS3589 $62.99 LIST2923-1A, LIST2923-2, LIST2923-3, Inc.® Premium Carburetor Repair Kit LIST3012-2, LIST3013-2, LIST3658-2, (For Marvel Schebler carburetors) R2923A, R2923-1A, R2923-2A, R2923-3A, fits: NAA, Jubilee, Early 600, 700 series Engine parts R2923-4A, R3012A, R3012-1A, R3012-2A, (1953-57) w/ TSX 428, 500 R3012-3A, R3013A, R3013-1A, R3013-2A, R3013-3A, R3013-4A, R3210, R3210A, R3210-1A, ); Also fits Ford OEM carbs FDS3592 $62.99 C5NE9510E, C5NE9510G, C5NE9510H, Premium Carburetor Repair Kit C5NE9510J, C5NE9510K, C5NE9510L, Parts,(For Marvel Schebler carburetor) C5NE9510S, C5NN9510D, C5NN9510E, fits: Early 600, 700 series (1954-57) C5NN9510F, C5NN9510G, C5NN9510L w/ TSX 580 NOTE: Includes repair components for acceleration pump, piston assy, spring, retainer. Float valve seat & diaphragm FDS3598 $62.99 not included. Premium Carburetor Repair Kit Complete Carburetor Repair Kits (For Marvel Schebler carburetor) fits: 501, 541, 601, 701 series (1957-62) ABC031 $46.95 Complete Carburetor Repair Kit w/ TSX 692 (For Marvel Schebler carburetors) fits: 9N, 2N, 8N (1939-52)Tractor (All w/ TSX 33, FDS3604 $62.99 241A,B,C, 420) Premium Carburetor Repair Kit (For Marvel Schebler carburetor) ABC034 $48.95 Complete Carburetor Repair Kit fits: 601, 2000 4-cyl. series (1957-64) (For Marvel Schebler carburetors) (All w/ TSX 765) fits: NAA, Jubilee (1953-54) both w/ TSX 428; 600, 700 (1954-57) both w/ TSX 500, FDS3595 $62.99 580 (All w/ 134 C.I. gas engine) Premium Carburetor Repair Kit ABC212 $49.95 (For Marvel Schebler carburetors) Complete Carburetor Repair Kit fits: Early 800, 900 series (1954-57) Steiner(For Marvel Schebler carburetors) w/ TSX 593, 706 fits: 501, 601, 701, 2000 4-cyl. w/ 134 C.I. gas engine (1957-64) (All w/ TSX 765) FDS3601 $62.99 ABC213 $49.99 Premium Carburetor Repair Kit Complete Carburetor Repair Kit (For Marvel Schebler carburetors) (For Marvel Schebler carburetors) fits: 801, 901, 1801, 4000 4-cyl. series fits: 800, 900 series w/ 172 C.I. gas engine (1957-64) w/ TSX 662, 769, 813 (1954-57) (All w/ TSX 593, 706)

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 173 Fuel lift pumps Governors, parts cont... Part # USD Description / Application Part # USD Description / Application FDS1990 $37.50 ABC029 $87.50 Basic Governor Repair Kit fits: 9N, 2N, Fuel Lift Pump fits: 2000 3-cyl., 2600, 8N (1939-52), Replaces: BOK12502, 2610, 3000, 3600, 3610, 4000 3-cyl., 86979852 USA made NOTE: Kit 4600, 4610, 5000, 6600, 230A - 5550 contains gasket, lower race assembly, gas (1965-82), Replaces: C5NE9350A, ball bearing, C-clip, shim, 5/8” D5NN9350B, F2NN9350AA governor balls. ABC3471 $24.95 Diesel Fuel Lift Pump w/ Gasket ABC030 $168.50 Complete Governor Repair Kit fits: Fordson Power Major, 3000, 5000, fits: 9N, 2N, 8N (1939-52) 5600, 5610, 6600, 6610, 7000, 7600, 7610, Replaces: CAPN12502A USA made 7710, 7810, 7910, 8000, 8600, 8700, 9000, NOTE: Kit contains gasket lower race 9600, 9700, TW5 - TW35 (1958-90) assembly, shaft assembly, upper race (All using Simms inline injection pump) assembly, ball bearing assembly, drive Replaces: D8NN9350AB NOTE: Fuel shaft ball stop shim, 5/8” governor outlet is at 6:00 position and the fuel balls, bushings, dust seal, C-clip. inlet is at 12:00 position. See website ABC290 $0.99 for additional applications. Governor Housing Mounting Cover Gasket fits: 9N, 2N, 8N (1939-52) Ford Replaces: 9N6022Inc.® USA made New Holland New Fuel injector, seal kit FDS3770 $149.95 Governor Internal Centrifugal Part # USD Description / Application Assembly fits: 9N, 2N, 8N (1939-52) NOTE: Simple one screw to replace FDS3459 $49.99 Fuel Injector fits: 2000 3-cyl., 3000, 3400, the assy. If your tractor has the 3500, 3550, 4000 3-cyl., 4400, 4500, 5000, proofmeter you will also need a 5500, 7000 (1965-74) roll pin (0.314” x 0.750” long) to Replaces: D0NN9F593A use the proofmeter. See website for replacement numbers. FDS3461 $2.39 Fuel Injector Seal Kit fits: 2000 3-cyl., Parts, FDS248GK $1.75 2600, 2610, 2810, 2910, 3000, 3600, 3610, Governor Mount Gasket fits: Late 8N

Engine parts 3910, 3930, 4000 3-cyl., 4600, 4610, 4630, SN: 263843 (1950-52) w/ side mounted 4830, 4835, 5000, 5600, 5610, 6600, 6610, distributor, Replaces: 8N6018 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8600, 8700, 9000, FDS489 $78.50 BACK IN STOCK! Governor fits: NAA 9600, 9700, TW5 - TW35; Industrials: - 960 (1953-57) when using FDS1278; 230A - 7500 (1965-90) 501 - 4140 4-cyl. gas, LP (1958-64) w/ Replaces: C5NE9F596A NOTE: See engine SN: 26402 & up, Replaces: website for all applications. Kit EAF12470A (flyweight), EAF18220C includes (1) cork seal, (1) copper (ball) NOTE: Flyweight style. injector washer, (2) leakTractor off / return FDS1278 $18.95 Governor Compensating End & Spring line copper washers. 3 to 6 used per Assembly Fits: NAA - 960 (1953-57) engine; Sold individually. when using a flyweight style governor; 501 - 4140 4-cyl. (1958-64) gas, LP w/ engine SN: 26402 & up Governors, parts Replaces: NCA99810A (1/4”-28 UNF) FDS1921 $5.95 Governor Compensating Spring Part # USD Description / Application fits: NAA, Jubilee, Golden Jubilee ABC027 $239.99 (1953-54), Replaces: NAA9827B Governor Assembly (Complete 3 Arm) (8.250” o/a length, 0.435” O.D., 0.059” Steiner wire dia) USA made NOTE: Mounts fits: 9N, 2N (1939-47) w/out proofmeter between bellcrank & underneath drive, Replaces: 9N18200C USA made battery tray. FDS1917 $5.95 Governor Compensating Spring ABC028 $239.99 fits: 501, 600 - 4000 4-cyl. (1954-64) gas, LP, Replaces: NCA9827A Governor Assembly (Complete 3 Arm) (6.535” o/a length, 0.532” O.D., 0.070” fits: 8N (1947-52) w/ proofmeter drive wire dia) USA made NOTE: Mounts Replaces: 8N18204B USA made between bellcrank & underneath battery tray.

174 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Governors, parts cont... Radiators, parts cont... Part # USD Description / Application Part # USD Description / Application ABC3969 $6.50 Governor Shaft Oil Seal fits: Jubilee, ABC2282 $4.95 NAA, 501, 600, 601, 700, 701, 800, 801, Radiator to Front Support Bolt Kit 900, 901, 2000 4 cyl., 4000 4 cyl. all gas, fits: 2N - 4000 4-cyl. (1939-64) LP (1953-64), Replaces: EAF18183B NOTE: Kit contains (2) carriage bolts, (.500” I.D., .879” O.D., .218” wide) nuts, lock washers. Fits FDS1859, NOTE: Mounts in the side of the FDS1865 radiators. timing cover.

Radiators, parts Radiator caps w/ gaskets Part # USD Description / Application Part # USD Description / Application FDS1859 $319.95 FDS039 $13.99 Heavy Duty Radiator (For Pressurized (Black) system) fits: 9N, 2N, 8N (1939-52) New Holland Wing Radiator Cap (For (4 PSI) Replaces: 8N8005, 86551430 Pressurized systems) fits: 9N, 2N, 8N Ford (25” H, 16” W) NOTE: Does not include (Will not fit Early 9N & 2N w/ ORIGINAL drain plug or cap. non-pressurizedInc.® radiator 1939 through 12/1943), Replaces: 9N8100, 2N8100A FDS1865 $359.95 Heavy Duty Radiator fits: Jubilee, 501, FDS343 $17.95 NOTE: Pressurized radiators will have Engine / Cooling parts 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. (Chrome filler neck with slots on the outside for series (1953-64) (All w/out oil cooler in Plated) the cap. Non-pressurized radiators will lower tank), Replaces: C5NN8005AB, have the slots for the cap on the inside of NCA8005B,C,D (24-5/8” H, 17-3/8” W) the radiator neck. NOTE: Does not include drain plug or cap. Original style straight fins. FDS422 $259.99 Complete Radiator fits the following Parts, ABC008 $9.99 tractors w/out oil cooler in lower tank: (4 PSI) 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 4000, 4000SU, 4100, 4600SU, 4610; Industrials: 231, 335, 340, Radiator Cap w/ Gasket (For 4 PSI 445, 531, 540, 3400, 3500, 4400, 4500 Pressurized systems) (For radiators w/ 1” (1965-90) (All 3-cyl. gas, diesel) tall filler neck) fits: 9N - TW35 (1939-90) Replaces: C7NN8005H, Underside view Replaces: 2N8100A, ECON8100AA; Serviceable for E2NN8100BA, E0NN8005MD15M ABC1396 $9.99 E5NN8100AA - 4 PSI instead of 13 PSI ABC209 $3.99 (7 PSI) Radiator Drain Plug fits: 9N - TW35 (1.500” radiator neck I.D., 2.330” O.D., (1939-90), Replaces:Tractor 81465471, 9N8115B, 2.000” tang to tang) NOTE: See website C9NN8115A (1/4”-18 NPT) USA made for full applications. NOTE: See website for full applications.

ABC057 $2.99 Underside view

Radiator Hood Pad fits: 9N, 2N, 8N ABC1398 $6.99 Radiator Cap w/ Gasket (For (7 PSI) (1939-52), Replaces: 2N8032 USA made (7 PSI) Pressurized systems) (For radiators w/ 3/4” tall filler neck) ABC455 $3.29 Radiator Mounting Pad fits: 9N, 2N, fits: 2000 3-cyl. - TW35 (1965-90) 8N, NAA, Jubilee, 541, 600, 700, 800, ABC1398: Replaces: DOHA8100C, Steiner900, 1801, 2000, 2310, 2600, 2610, 2810, Underside view 81855444, 83935904 2910, 3000, 3600, 3610, 3910, 4000, 4100, (2.330” O.D., 2.000” tang to tang, 4600, 4610, 5000, 5600, 6600, 7000, 7600; ABC1394 $5.99 1.096” tall) Industrials: 1801, 3400, 3500, 4400, (13 PSI) 4500 (1965-90), Replaces: B9NN8125A, ABC1394: Replaces: E5TH8100AA, C0NN8125A; If trimmed can replace E5TH8100AADS, E2NN8100BA, 83956266, C5NN8125A, 594762 83957211, 83935905 (2” x 2”, 1/4” thick) NOTE: 2 used per (2.333” O.D., 2.000” tang to tang, tractor; Sold individually. See website 1.096” tall) NOTE: See website for full Underside view for full applications. applications.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 175 Straight radiator hoses Radiator hoses, clamps cont... NOTE: Not suitable for gas or oil. Must cut Part # USD Description / Application to length. FDS1413 $9.50 Radiator Hose (Radiator lower) Part # USD Specifications fits: 2000 3-cyl., 2310, 2600, 2610, 2810, ABC4286 $41.99 (1-1/4” I.D., 1-3/4” O.D., 3’ long) 2910, 3000, 3600, 3610, 4000 3-cyl, 4200, ABC3973 $24.99 (1-1/2” I.D., 1-7/8” O.D., 3’ long) 4600, 4610, 5000, 7000 gas, diesel (1965-90); Industrials: 230A - 545A ABC3977 $24.99 (1-3/4” I.D., 2-1/8” O.D., 3’ long) Replaces: 81805637, C5NN8286B, ABC3983 $24.99 (1-7/8” I.D., 2-1/4” O.D., 3’ long) C5NN8286BGV (1.700” I.D.) ABC3991 $26.95 (2” I.D., 2-3/8” O.D., 3’ long) FDS4534 $10.99 NEW! Radiator Hose (Radiator upper) ABC3995 $36.50 (2-1/8” I.D., 2-1/2” O.D., 3’ long) fits: 3230, 3430, 3930, 4130 3-cyl. (1990-99), ABC3999 $36.50 (2-1/4” I.D., 2-5/8” O.D., 3’ long) 4630; Industrials: 250C, 260C ABC4003 $44.95 (2-3/8” I.D., 2-3/4” O.D., 3’ long) Replaces: F0NN8260AA (1-1/2” I.D.) ABC4007 $51.99 (2-7/8” I.D., 3-1/4” O.D., 3’ long) FDS4528 $11.99 NEW! Radiator Hose (Radiator upper) ABC4012 $49.95 (3” I.D., 3-3/8” O.D., 3’ long) fits: 4600 (w/ Cab & AC), 4610 Replaces: D6NN8260A, 83908056 (1-1/2” I.D.) Ford Radiator hoses, clamps FDS4540 $13.99 Inc.® New Holland New Part # USD Description / Application NEW! Radiator Hose (Radiator Upper) ABC055 $7.59 Radiator Hose (Cylinder head to radiator fits: TW5, TW15, TW25, TW35, 8530, 8630, upper) fits: 9N, 2N, 8N (1939-52) 8730, 8830, Replaces: E3NN8333AA Replaces: 2N8260 (1-7/16” I.D., 10” long, (1-3/4” I.D.) 1-13/16” O.D.) FDS4163 $10.99 ABC053 $9.85 Radiator Hose (Water pump to radiator Radiator Hose (Radiator lower) lower) fits: 9N, 2N, 8N up to SN: 263843 fits: 5000, 5610, 6410, 6610, 7000; Also fits (1939-50); NAA, Jubilee, 501, 600, 700, 800, Parts,the following w/out oil coolers: 5600, 900, 1801, 2000 4-cyl., 4000 4-cyl. series 6600, 7600; Industrial: 335, 345C, 345D, 445, 450, 535, 540A, 540B, 545, 545A, 4400,

Cooling parts (1953-64) (All w/out power steering) Replaces: 312588 (1-1/2” I.D.) 4500, 5500, 5550, 6500 gas, diesel (1965-93) Replaces: C5NN8286C, 81805638 ABC054 $10.49 Radiator Hose (Water pump to radiator (1.645” I.D., & 1.757” I.D.) lower) fits: 8N SN: 263844 & up (1950-52) FDS4546 $16.99 w/ side mounted distributor NEW! Radiator Hose (Radiator upper) Replaces: 8N8286 (1-1/2” I.D.) fits: 7840, 7840O, 8240 FDS4132 $15.99 Replaces: F0NN8260DA (1-1/2” I.D.) Radiator Hose (Water Pump to Radiator Lower) fits: 501, 601, 701, 801, 901, 1801, TractorFDS4531 $12.99 2000 4-cyl., 4000 4-cyl. series (1958-64) NEW! Radiator Hose (Radiator lower) (All w/ power steering), Replaces: 313151 fits: 7910, 8210, TW10, TW20, TW30 Replaces: D8NN8B274AB ABC056 $4.99 Radiator Hose (Radiator upper) fits: NAA, (1-3/4” I.D.) Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1953-64) gas, ABC492 $3.29 diesel, Replaces: NAA8260B, 310048 Clamp (For Upper Radiator Hose) (For (1-1/4” I.D. x 7-3/8” length) 1-5/8” O.D. hose) fits: Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 FDS4123 $13.99 Radiator Hose (Radiator upper) 4-cyl. series (1953-64) fits: the following gas: 2000 3-cyl. - 5000, Steiner Replaces: 8BA-8287 2600 - 4600, 2110 3-cyl. - 4610; Industrials: 230A - 545, 3400 - 4500 (1965-2/90) FDS258 $3.75 Clamp (For 1-3/4” to 2” O.D. hose) Replaces: C5NN8260D (1-1/2” I.D.) Fits upper and lower radiator hose: 9N, FDS1367 $6.99 Radiator Hose (Radiator upper) fits the 2N, 8N (1939-52); Fits lower radiator hose: following diesels: 2000 3-cyl. - 7700 (1965- Jubilee, NAA, 501, 600, 700, 800, 900, 1801 81); 2310 - 7610 w/out air conditioning series, 2000 4-cyl., 4000 4-cyl. (1953-1964); (1982-92), Replaces: C5NN8260A, Fits upper radiator hose: 2000 3-cyl. - 7700 C5NN8260B, D5NN8260D, 81805628, (All diesels 1965-81), 2310 - 7610 w/out air 83907414 (1-1/2” I.D., 6-7/8” end to bend) conditioning (1982-92), Replaces: 60-8287

176 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Worm drive hose clamps Thermostats, parts cont... USA made Part # USD Description / Application NOTE: Premium stainless steel. FDS2057 $1.99 Sold in packs of 10. Part # USD Specifications Thermostat Housing Gasket fits: NAA, ABC4133 $6.99 (5/16” - 5/8” range, 5/16” band width) 4000 4-cyl. (1953-64) gas, diesel Replaces: EAF8255A USA made ABC4142 $7.59 (3/8” - 7/8” range, 5/16” band width) ABC4147 $7.99 (7/16” - 1” range, 5/16” band width) ABC4151 $9.59 (1/2” - 1-1/16” range, 1/2” band width) FDS4247 $12.99 NEW! Thermostat Housing fits: 2000 ABC4155 $9.59 (1/2” - 1-1/4” range, 1/2” band width) 3-cyl., 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000 3-cyl., 4000SU, 4200, ABC4158 $9.99 (11/16” - 1-1/2” range, 1/2” band width) 4600, 4610, 5000, (5110, 5610, 5900, 6410, ABC4161 $10.95 (3/4” - 1-3/4” range, 1/2” band width) 6610, 6710, 7610, 7710 All up to 7/31/87), ABC4165 $10.99 (1” - 2” range, 1/2” band width) 5200, 5600, 5700, 6600, 6700, 7000, 7100, ABC4180 $13.99 7200, 7600, 7700, 8000, 8600; Industrials:

(1” - 3” range, 1/2” band width) New Holland 230A - 555B, 3400, 3500, 3550, 4400, 4500, ABC4169 $10.99 (1-1/4” - 2-1/4” range, 1/2” band width) 5500, 5550, A62; New Holland Skid Steer: Ford ABC4172 $11.99 (1-1/2” - 2-1/2” range, 1/2” band width) L781, L783, L785, L865, LX865, LX885 ABC4176 $11.99 (1-3/4” - 2-3/4” range, 1/2” band width) All w/ Ford gas,Inc.® diesel engine (1965 ABC4184 $13.99 (2-1/4” - 3-1/4” range, 1/2” band width) - 10/2000 - unless noted), Replaces: C7NN8594A, C7NN8594B, 81820903 ABC4188 $14.99 (2-1/2” - 3-1/2” range, 1/2” band width) Cooling parts ABC4249 $1.45 Thermostat Housing Gasket fits: Dexta, ABC4204 $17.95 (2-1/2” - 4-1/2” range, 1/2” band width) Super Dexta (1958-64); 276V, 2000 3-cyl. ABC4192 $15.99 (2-3/4” - 3-3/4” range, 1/2” band width) - 9000, 2310 - 7710, 2600 - 9700, TB80 ABC4196 $15.99 (3” - 4” range, 1/2” band width) - TB110, TS90 - TS115, TW10, TW20, TW30; Industrial: 230A - 755B, 3400 - ABC4200 $15.99 (3-1/4” - 4-1/4” range, 1/2” band width) 7500, A62 - A66, LB90 - LB115 gas, diesel ABC4206 $99.99 (130-pc. assortment; Display rack: 5/16” Parts,(1965-03/2006), Replaces: C2DE8255A, - 2-3/4” range) NOTE: Includes 20 each: E9NN8255AA, EIADKN8587, 83999978 ABC4133, ABC4142, ABC4155, ABC4161, (2-7/8” c.c. holes) ABC4169, ABC4176 & 10 each: ABC4151.

Fan shrouds, hardware Thermostats, parts Part # USD Description / Application Part # USD Description / Application FDS082 $64.99 ABC051 $23.99 Thermostat fits: 9N, 2N, 8N (1939-52) Replaces: B2NN8575A, 9N8575 Fan Shroud fits: 9N, 2N, 8N (1939-52) (160 degree, 2-1/4” longTractor for 1-1/2” I.D. Replaces: 2N8146 hose) NOTE: Fits in upper radiator hose, Toward Radiator pointed end toward radiator. Will also work in other applications using 1-1/2” I.D. hose. FDS236 $65.95 ABC052 $11.99 Fan Shroud fits: NAA, Jubilee, 501, 600, Thermostat w/ Gasket fits: NAA - 9600 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. gas, diesel (1953-76) series (1953-64) gas, diesel Replaces: D8NN8575AA, EAF8575BWG Replaces: NCA8146A NOTE: Made to fit (160 degree Lo-Temp) original radiator; must be trimmed to fit Steiner aftermarket radiator lower neck. FDS4234 $49.99 NEW! Thermostat Housing fits: Golden Jubilee, Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4-cyl, 4000 FDS443 $3.49 4-cyl.; Industrial: 1801 - 4130 (1953-64) w/ 4-cyl. 134, 144, 172, 192 C.I. gas, diesel Fan Shroud Screw Kit w/ Washers Replaces: EAF8592A, 310031 (For FDS082 & FDS236) (2-3/4” c.c. bolt pattern) NOTE: Fits both (#8-32 x 3/8” size) manual & power steering. Has provision for power steering bracket.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 177 Fan blades Fan belts cont... Part # USD Description / Application Part # USD Description / Application FDS040 $42.50 FDS1458 $12.99 Alternator Fan Belt fits: 2600 - TW10, (1975-83); Industrials: 230A - 755 Replaces: D3NN10C318C, D3NN10C318D, Fan Blade (4 Blade) fits: 9N, 2N, 8N, NAA, 9604339 (17/32” x 54”) Jubilee (1939-54), Replaces: 8N8600A ABC1648 $15.99 Fan Belt fits: Some 540, 550, 555 (fan w/ out 72 amp/alt); 976, 5530, 5610, 6700, 6710, A62 (1978-93) FDS4167 $46.95 Replaces: D8NN8620A, C5TE8620A Fan Blade (6 Blade) fits: 9N, 2N, 8N, NAA, (17/32” wide x 45-1/4” long) USA made Golden Jubilee, Jubilee (1939-54) IHS235 $9.99 Alternator Fan Belt fits the following w/ Replaces: 9N8600B, 9N8600D 72-80 AMP alternators: Some 540 - 550 (15-3/4” O.D., 3-1/8” c.c. mounting holes) diesel w/ air conditioning, 5110, 5610, 6410, 6610, 7610, 7710, 7810 All w/ cab FDS250 $49.95 (10/1/1985-93) Replaces: E4NN10C318AA, 86514615 (1/2” x 30-1/4”) Fan Blade (3 Blade) fits: 501, 600, 700, 800,

Ford 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1954-64) gas, Replaces: NCA8600S Inc.®

New Holland New Water pumps w/ gaskets NOTE: NEW not Rebuilt; no core charge.

Part # USD Application FDS053 $69.99

Fan belts Fits: 9N, 2N, 8N (1939-52) NOTE: Verify belt size before ordering. Replaces: 8N8501A Part # USD Description / Application Parts, ABC058 $14.95 Fan Belt (For tractors w/ generators not FDS054 $69.99 w/ alternator conversion) fits: 9N, 2N, Cooling parts (8N up to SN: 263843) (1939-50) w/ front Fits: Jubilee, Golden Jubilee, NAA mounted distributor, Replaces: 9N8620B (1953-54), Replaces: CDPN8501B (Notched; 11/16” x 46-1/2”) ABC059 $12.95 Fan Belt (For tractors w/ generators or FDS055 $69.99 Fits: 501, 600, 700, 800, 900, 1801, 2000 alternator conversion) fits: Late 8N SN: 4-cyl., 4000 4-cyl. series (1954-64) gas, 263844 & up (1950-52) w/ side mounted diesel, Replaces: CDPN8501C distributor, NAA, Jubilee (1952-54), Ford (4-3/8” o/a pulley length) models w/ Delco 10 SI style alternator NOTE: Includes extended single-groove Replaces: 8N8620 (Notched;Tractor 5/8” x 40”) pulley. FDS1091 $13.99 Alternator Fan Belt fits: 9N, 2N, (8N up FDS2259 $62.50 to SN: 263843) (1939-50) (All w/ front Fits: Fordson Major, Fordson Super mounted distributor) (11/16” x 43”) Major, Fordson Power Major gas, diesel ABC191 $10.50 Fan Belt (For generator only) fits: 501, 600, (1951-64) (All w/out power steering) 700, 800, 900, 1801, 2000, 4000 series 4-cyl. Replaces: E1ADKN8501B, 82847510 (1954-64) gas, diesel, Replaces: EAF8577A (33/64” x 40-3/4”) FDS3937 $82.45 FDS1108 $9.99 Alternator Fan Belt fits: 501, 600, 700, 800, Fits: 1000, 1600 Steiner900, 1801, 2000 4-cyl., 4000 4-cyl. series Replaces: 145016022, SBA145016022 (1954-64) (17/32” x 38-1/2”)

FDS1453 $12.99 Fan Belt fits: 2000 3-cyl. - 4500 (generators only - 1965-75); Also fits the following w/ FDS4073 $77.99 alternators: 6610 (1981-3/84), 8630, 8700, 8730, 8830, 9000, 9700, TW10, (TW20, Fits: 1500 (10/1979-82), 1700, 1900 TW30 air conditioner belt), Industrials: both (1979-83), Replaces: SBA145016071 650, 750, 755 (1976-93) Replaces: C9NN10C318B, 86514618 (1/2” x 53-1/4”) USA made

178 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Water pumps w/ gaskets cont... Ammeters cont... Part # USD Application Part # USD Application FDS4067 $69.99 FDS407 $12.95 Fits: 1910, (2110, 2120 both Japan built (30-0-30) fits: 9N, 2N, 8N, NAA, Jubilee, Compacts) all (1983 - 2002) 600, 700, 800, 900 (1939-57) Replaces: SBA145016540 Replaces: A0NN10670A NOTE: Includes pulley. (Terminal type)

ABC466 $14.95 FDS4144 $87.99 (60-0-60) fits: 9N - 960 w/ Alternator systems (1939-57) Fits: 1320, 1520, 1620, 1715 (1987 - 2/97) (Terminal type) USA made Replaces: SBA145016780, SBA145016781 NOTE: Stainless steel bezel.

ABC2238 $15.99 (60-0-60) fits: 9N - 960 (1939-57) FDS4157 $56.35 w/ Alternator systems Fits: 1720, 1920, (2120 4-cyl. diesel (Terminal type) USA made New Holland Japanese compact), 3415 (all 1987-02)

NOTE: Black bezel. Ford Replaces: SBA145017780 (5/8” hose barb) Inc.® Warning lights FDS329 $56.99 Fits: Series 2000, 3000, 3400, 3500, 3550, Part # USD Description / Application / Gauges Cooling parts 4000, 4400, 4500, 5000, 5500, 5550, 7000 FDS1848 $39.99 (1965-75); 2600, 3600, 4100, 4600, 5600, Dash Panel Warning Light Set (Oil 5700, 6600, 6700, 7600, 7700 (1975-81); Pressure & Generator) w/ Wires & Bulb 2310, 2610, 2810, 2910, 3610, 3910, 4110, Holders fits: Dexta, Super Dexta (1957-64) 4610 (1981-2/1990); 3230, 3430, 3930, 4130, both w/ 12-volt systems 4630, 4830, 5030 (3/1990 -99); 5110, 5610, Replaces: E203NE9, E204NE9 (0.550” O.D. 6610, 6710, 7610, 7710 (1981-10/1988) Parts,lense, 0.822” outer housing dia., 1.715” Replaces: DHPN8N513C, DJPN8A513C, o/a length, 1.010” flange mounting dia.) NOTE: Red & green lenses. EAPN8A513F, EGPN8A513DA NOTE: Includes single-groove pulley, FDS2476 $14.99 Generator / Select-o-Speed Transmission does not include rear housing. Pump has Temperature Warning Light w/ ‘PAL’ 5/16” & 7/16” dia. mounting holes and nut fits: 501 - 5000; Industrial: 340 - 655A replaces earlier style pump w/ 5/16” & (1957-88), Replaces: 310124, B9NN10241B, 3/8” dia. mounting holes. 373348S (nut) (Flange is 0.875” O.D., KUB4129 $72.95 3/4” - 20 NF thread, 0.885” tall) Fits New Holland Skid Steer: L454 & NOTE: See website for full applications. L455 w/ D1402B Kubota engine, L553 & L555 w/ V1902B KubotaTractor engine Oil pressure gauges, parts Replaces: 503180 For 2" diameter hole. When ordering a dash mounted oil pressure gauge you also need to order (1) of the oil gauge fittings depending on the line size to adapt your existing line to the gauge: ABC538, Ammeters IHS626, ABC2353, ABC2360. For 2" diameter hole. Part # USD Description / Application

Part # USD Description / Application FDS405 $14.95 (0-50 PSI) fits: 9N, 2N, 8N (1939-52) ABC016 $13.99 (20-0-20) fits: 9N, 2N, 8N, NAA, Jubilee, Replaces: 9N9273A Steiner600, 700, 800, 900 (1939-57) (1/8” NPT male thread) Replaces: FAD10850A NOTE: Black bezel. Line adapter sold (Terminal type) separately. NOTE: Stainless steel bezel. ABC082 $21.50 (0-50 PSI) fits: 9N, 2N, 8N (1939-52) ABC109 $13.99 (30-0-30) fits: 9N, 2N, 8N, NAA, Jubilee, Replaces: 9N9273A 600, 700, 800, 900 (1939-57) (1/8” NPT male thread) Replaces: FAD10850A NOTE: Stainless steel bezel. (Terminal type) USA made Line adapter sold separately. NOTE: Stainless steel bezel. Oil pressure gauges, parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 179 Oil pressure gauges, parts cont... Water temperature gauges, part For 2" diameter hole. For 2" diameter hole.

When ordering a dash mounted oil pressure gauge you also Part # USD Description / Application need to order (1) of the oil gauge fittings depending on the FDS2673 $49.95 Temperature Gauge Adapter Pipe line size to adapt your existing line to the gauge: ABC538, fits: 9N, 2N, 8N (1939-52) IHS626, ABC2353, ABC2360. (3-5/8” long, 1-1/2” O.D; Uses 5/8”-18 Part # USD Description / Application UNF temperature gauge lead) FDS401 $14.95 (0-80 PSI) fits: 9N, 2N, 8N, NAA, Jubilee, NOTE: Installs in upper hose. Slide new 541, 600, 700, 800, 900, 1801, 2000 4-cyl., adapter pipe in place, drill 2” O.D. hole 4000 4-cyl. series (1939-64) in dash to mount gauge. Use w/ gauge Replaces: FAD9273A ABC081 or FDS2424. (1/8” NPT male thread) NOTE: Black FDS2424 $31.50 bezel. Line adapter sold separately. Water Temperature Gauge w/ Bracket fits: 9N, 2N, 8N (1939-52) using FDS2673 ABC005 $21.50 (0-80 PSI) fits: 9N, 2N, 8N, NAA, Jubilee, Adapter; NAA, Jubilee, 501, 600, 700, 800, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 900, 1801, 2000, 4000 4-cyl. series (1953-64) 4000 4-cyl. series (1939-64) gas, diesel except Majors, Dexta Replaces: FAD9273A Replaces: C3NN18287A (36” lead) (1/8” NPT male thread) NOTE: Black bezel. Ford NOTE: Stainless steel bezel. Line Inc.® adapter sold separately. ABC081 $31.50 New Holland New Water Temperature Gauge fits: 9N, 2N, 8N ABC523 $23.99 Oil Gauge Copper Line Kit (For tractors (1939-52) using FDS2673 adapter; NAA, using 1/8” x 6’ copper oil line) Jubilee, 501, 600, 700, 800, 900, 1801, 2000, (6’ x 1/8” line, (2) 5/16” - 24 UNF Nut, 4000 4-cyl. series (1953-64) gas, diesel (2) compression sleeves, (1) 1/8” - 27 except Majors, Dexta NPTF female to 5/16” - 24 UNF male Replaces: C3NN18287A (36” lead) adapter) NOTE: Use w/ ABC538 fitting. NOTE: Stainless steel bezel. FDS486 $8.95 Oil Gauge Line to Block Elbow (Oil

Gauges Parts, Terminal Block) fits: 9N, 2N (1939-47) FDS1852 $43.75 Replaces: 9N6722 (1/4” NPT male, Water Temperature Gauge 1/4” tube &Â 3/16” tube) fits: Dexta, Super Dexta (1957-64) Replaces: 957E10883 FDS488 $9.99 Oil Gauge Line to Block Elbow fits: 8N (86-1/2” long lead) NOTE: Stainless steel (1947-52), Replaces: 8N6722 bezel. Illuminated. (1/4” NPT male pipe fitting, (2) 1/4” flare fittings) ABC2360 $3.95 Oil Gauge Adapter FittingTractor (For gauges w/out removable fitting) fits: 2N, 9N Fuel gauges w/ black bezel (1939-47), Replaces: 9N18685 For 2" diameter hole. Will work w/ FDS199 & FDS200 fuel (1/8” NPT female to 3/16” tubing sending units. female) Part # USD Application

ABC2353 $3.95 FDS275 $29.95 Oil Gauge Adapter Fitting (For gauges (For 6-volt positive ground) fits: 501, 601, w/out removable fitting) fits: 8N 701, 801, 901, 1801, 2000, 4000 4-cyl. series (1947-52), Replaces: 8N18685 (1958-64), Replaces: 310948 (1/8” NPT female to 1/4” tubing female) (14-122 Ohm) NOTE: Will work w/ ABC538 $13.95Steiner FDS199 & FDS200 fuel sending units. Oil Gauge Fitting (For gauges w/out removable fitting) (1/8” NPT to 1/8” FDS276 $29.95 compression) USA made NOTE: Use w/ ABC523 line kit. (For 12-volt negative ground) fits: Same as IHS626 $13.95 FDS275, Replaces: 310949 Oil Gauge Fitting (For gauges w/out (14-122 Ohm) NOTE: Will work w/ removable fitting) (1/8” NPT to 1/4” FDS199 & FDS200 fuel sending units. compression) USA made

180 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fuel sending units, parts Fuel sending units, parts cont... Part # USD Description / Application Part # USD Description / Application

FDS200 $24.95 6-volt Positive Ground / 12-volt Negative FDS3488 $47.95 Fuel Sending Unit w/ Gasket (Lock ring Ground Fuel Sending Unit fits: 601, 701, type) fits: Some 5000, 5100, 5190, 5340, 2000 4-cyl. series (1958-64) gas, diesel w/ 5600, 6600, 7600 (1965-5/81); 5610, 6610, 6-volt or 12-volt systems 7610 (1982 -11/83); 7000, 7100 (1971-75) Replaces: 310938 (6-volt), 310939 (12-volt) Replaces: C5NN9A316A, D8NN9A316JA (5-1/2” long, Resistance = 14 - 122 OHM (30 - 250 OHMS, 17-1/4” o/a length range) NOTE: Use w/ FDS275 & FDS276 (extended)) NOTE: Top quality w/ copper fuel gauges & FDS178 fuel tank. Does float, stainless steel construction, & not work w/ O.E.M. style fuel gauges premium ceramic resistor. FDS3501 $47.95 Fuel Sending Unit w/ Gasket (5 hole FDS199 $24.95 6-volt Positive Ground / 12-volt Negative mount type) fits: Some 5010 up to

Ground Fuel Sending Unit fits: 801, 901, 8/22/1999; 5110, 5610, 6610, 7610 (All 1801 series, 4000 4-cyl. (1958-64) gas, diesel 12/1983-92); 5200; 5600, 6600, 7600 (All w/ 6-volt or 12-volt systems 6/1979-81); 5610S, 5900, 6410, 6810, 7000, New Holland Replaces: 310940 (6-volt), 310941 (12-volt) 7010, 7100 (1971-91) (8-3/4” long, Resistance = 14 - 122 OHM Replaces: E3NN9A316BA, 83943962 Ford NOTE: Use w/ FDS275 & FDS276 range) (30 - 250 OHMS, 17-1/4” o/a length fuel gauges. Does not work w/ O.E.M. (extended)) NOTE:Inc.® Top quality w/ copper style fuel gauges. float, stainless steel construction, & FDS2694 $13.59 premium ceramic resistor. Sending Unit Lock Ring fits: Same as FDS199, FDS200; 6000 FDS3487 $5.25 Sending Unit Lock Ring fits: 2000 3-cyl.,

Replaces: FEG99275A 3000, 4000 3-cyl., 2600, 3600, 4600, 2610, Gauges (2.682” O.D., 1.895” I.D.) 3610, 4610, 5000, 5100, 5190, 5340, (1965- NOTE: Retains sending unit to tank. 1/84); 5600, 6600, 7600 (1975-5/79), 5610, 6610, 7610 (1982-11/83), 7000, 7100 (1971- FDS2700 $6.99 Parts,75), Replaces: C5NN9N283A, 81811218 NOTE: 3 locking tangs. Sending Unit Gasket fits: Same as FDS199, FDS200; 6000, Replaces: B9NN9276A FDS3485 $4.49 Sending Unit Gasket fits: Same as FDS3487 USA made Replaces: 211E9276, E2NN9276AA (2.675” O.D., 2.000” I.D., 0.078” thick) FDS3482 $44.99 Fuel Sending Unit w/ Gasket (Lock ring ABC3261 $3.95 Fuel Sending Unit Gasket fits: Ford type) fits: 2000 3-cyl., 3000, 4000 3-cyl., models (April 1976-2007), 2310 - 8210, 2600, 2610, 3600, 3610, 4600, 4610 series 2600 - 9700, 3230 - 8830, TW5 - TW35; New (1965-1/84), Replaces: C5NN9A316B, Holland: TJ275 - TJ530 D8NN9A316KA (30 - 250 OHMS, 14-3/4” Replaces: 104812C3, 83904043, 87713557 Tractor (1.715” I.D., 2.850” O.D., 0.132” thick, (5) o/a length (extended)) NOTE: Top quality w/ copper float, 1/4” screw holes) USA made stainless steel construction, & premium NOTE: See website for all applications. ceramic resistor. See website for all applications. From a satisfied customer! FDS3494 $47.95 Fuel Sending Unit w/ Gasket (5 hole mount type) fits: Some 2810, 2910, “I am restoring a 1952 8N tractor which is 3610, 3910, 4110, 4610 (All 2/1984-90); very new to me. I have made three orders Industrial: 250C, 260C, 334, 340A, 340B, Steiner345C, 345D, 445, 445A, 445C, 445D, 450, already and I am pleased with the service! 455, 540A, 540B, 545 545A, 545C, 545D My first orders were by phone and everyone (1978-2000 w/ updated fuel tank using was friendly and very helpful. My parts 5 screw flange sending unit) Replaces: E3NN9A316CA, 83943961, were exactly as I ordered and shipped in 87713557 (gasket) (30 - 250 OHMS, a timely manner. Your technicians were 14-3/4” o/a length (extended)) helpful also and I enjoyed the videos. NOTE: Top quality w/ copper float, stainless steel construction, & premium Steiner is #1 for tractor stuff.” - Danny V. ceramic resistor.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 181 Cluster gauges, parts Cluster gauges, parts cont... Part # USD Description / Application Part # USD Description / Application FDS389 $99.95 FDS1491 $8.99 Electric Water Temperature Sending Unit Dash Gauge Cluster Assembly fits: Some w/ Adapter Bushing fits: 2000 3-cyl. 2000, 3000, 3400, 3500, 4000, 4400, 4500 series, 2600, 3000 series, 4600, 4000 3-cyl. (1965-74), 5000 (1965-75) series, 4600, 5000 series, 5600, 6600, 7000 Replaces: C5NN10849L, EHPN10849A series, 7600, 8000, 8600, 9000, 9600, 9700, NOTE: Clockwise needle rotation. For TW10, TW20, TW30; Industrial: 231 - generator equipped tractors or when 340B, 3400, 3500, 3550, 420 - 4500, 515 converted to an aftermarket alternator. - 755B (1965-83), Replaces: C4AH10884A, Verify rotation of old cluster before D5NN10884A,B, 81784077, 83903061, ordering. 87554838, 87712906 NOTE: Fits either 1/8” NPT or 3/8” NPT thread size as FDS391 $99.95 Dash Gauge Cluster Assembly fits: 2310, adapter bushing is including. 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4600 SU, 4610, 5110, 5600, 5610, 5900, 6410, 6600, 6610 6810, Tachometers, parts 7000, 7600, 7610; (1975-91) Industrials: Part # USD Description / Application 230A, 231, 233, 234, 250C, 333, 334, 335, FDS058 $41.50 Ford 340, 340A, 420, 445, 445A, 450, 515, 530A, Inc.® 531, 532, 535, 540, 540A, 540B, 545, 545A, Tachometer fits: 8N SN: 290271 & up New Holland New 550, 555, 555A, 555B, 655, 655A (1981-88) (1950-52), Replaces: 8N17360A1 Replaces: 83953544, D8NN10849TB, E5NN10849BA, E7NN10849BA NOTE: Counter-clockwise needle FDS060 $56.75 rotation. Verify rotation of old cluster Tachometer (4 Speed) w/ O.E.M. style before ordering. needle fits: Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series FDS1726 $18.95 (1953-64) gas, diesel Cluster Gauge Gasket fits: Same as Replaces: C3NN17360N Gauges Parts, FDS389, FDS391 Replaces: C5NN10A949C USA made FDS062 $55.00 Tachometer (5 Speed) w/ O.E.M. style needle fits: 600, 800, 900, 2000, 4000 4-cyl. FDS423 $17.80 Tachometer Cable w/ Metal Sheath series (1954-1964) gas, diesel (For FDS389, FDS391) Replaces: C3NN17360K Replaces: 82847520, D9NN17365AA, D9NN17365AB (48” long, square ends) FDS396 $42.75 Tachometer (Select-O-Speed) fits: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, FDS3752 $14.95 Tachometer Drive Assembly (For Lucas 1881, 2111 4-cyl, 4121 4-cyl. series (1959- Generators) fits: 2000, 3000,Tractor 3400, 4000, 64) gas, diesel (All w/ Select-O-Speed 4400, 4500, 5000, 8000, 9000 (1965-74) transmission), Replaces: C3NN17365A, Replaces: C5NF17B282B C3NN17360J NOTE: Fits FDS403 generator. FDS1849 $61.50

FDS3938 $19.95 Tachometer Drive Adapter Assembly Tachometer (Tractor Meter) fits: Dexta fits the following 1975-90 (unless noted): diesel, Super Dexta diesel (1957-64) 2310, 2600, 2610, 2810, 2910, 3230, 3430, Replaces: 957E17360A, 957E17360D 3600, 3610, 3900, 3910, 3930, 4100, (4110 1/1981 & up), 4130, 4600, 4610, 4630, FDS1587 $13.99 4830, 5030, 5600, 5610, 5700, 5900, 6600, Tachometer (Proof Meter) Drive Bolt Steiner6610, 6700, 6710, 7600, 7610, 7700, 7710; (For Vane & piston type hydraulic Industrials: 230A, -755B (All w/ cam pumps) fits: NAA - 4000 4-cyl. (1953-64) driven tach drive), Replaces: 84405438, Replaces: EAF951A USA made 87800006 (2.170” O.D. base) ABC1486 $6.99 FDS3266 $21.50 Tachometer (Proof Meter) Drive Adapter Electric Oil Pressure Sensor Switch Shaft fits: NAA - 4000 4-cyl. (1953-64) fits: 2000 3-cyl. - TW35 except 6000, Replaces: EAF17375D TM115 - TM190, TS90 - TS115 (1965-2003) (1.672” o/a length, 0.435” O.D.) (All w/ analog gauges) USA made NOTE: Fits both vane & piston pumps.

182 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tachometers, parts cont... Battery cables - USA made Part # USD Description / Application Heavy Duty; Straight terminals FDS3270 $18.49 Tachometer (Proof Meter) Drive Bushing unless otherwised noted fits: NAA - 4000 4-cyl. (1953-64) EO = Eyelet Opening Replaces: EAF17381A L = Length (7/8”-18 thread, 1.275” o/a length) NOTE: Fits both vane & piston pumps. Part # USD Specifications Ground Cables (Non-Insulated) ABC401 $12.99 (2 Gauge, EO = 7/16”, L = 6”) Tachometer cables ABC411 $16.99 (2 Gauge, EO = 7/16”, L = 9”) Part # USD Description / Application ABC405 $19.99 (2 Gauge, EO = 1/2”, L = 13”) FDS147 $16.95 ABC1175 $17.99 (2 Gauge, EO = 7/16”, L = 14”) Tachometer Cable Assembly w/ Metal Sheath fits: 8N SN: 290271 & up (1950-52) ABC421 $22.99 (2 Gauge, EO = 3/8”, L = 19”) Replaces: 8N17365 (32-1/2” long) ABC403 $24.99 (2 Gauge, EO = 7/16”, L = 24”) New Holland NOTE: One keyed end for drive. Insulated Battery Cables

ABC407 $16.99 (2 Gauge, EO = 3/8”, L = 10-1/2”) Ford ABC565 $15.95 Tachometer Cable Assembly w/ Metal ABC415 $16.99 (2 Gauge, EO = 3/8”, L = 12”) Sheath fits: NAA, Jubilee, 501, 600, 700, Inc.® ABC413 $17.99 (2 Gauge, EO = 3/8”, L = 14-1/2”, 90 800, 900, 1801 series, 2000, 4000 series degree terminal ends) 4-cyl. (1953-64) gas, diesel parts Gauges / Electrical Replaces: B9NN17365B ABC1582 $13.95 (2 Gauge, EO = 3/8”, EYELET BOTH (30-1/2” long key on one end) ENDS, L = 16-1/4”) ABC417 $17.99 (2 Gauge, EO = 3/8”, L = 21”) FDS1851 $29.99 NOTE: May have to drill eyelet hole Tachometer Cable Assembly w/ Nylon bigger on some applications. Sheath fits: Dexta diesel, Super Dexta ABC419 $20.50 (2 Gauge, EO = 3/8”, L = 27”) diesel (1957-64), Replaces: 81718522, Parts, 957E17365C (34-3/4” long)

IHS697 $29.99 Tachometer Cable w/ Metal Sheath Battery covers, trays fits the following w/out cabs: 7810, 7910, Part # USD Description / Application 8210, 8530, 8630, 8730, 8830, TW5, TW15, FDS168 $59.95 Battery Cover w/ Access Door & Battery TW25, TW35 (12/1987-90) Decal for cover (For 6-volt system) Replaces: E8NN17365AA fits: 8N (1947-52) w/ flat ground cable (61-1/4” long w/ square ends) Replaces: 8N5162 Tractor NOTE: Powder coat Ford red. FDS169 $59.95 Electrical outlet socket, parts Battery Cover w/ Access Door & Battery Decal for cover (For 6-volt system) Part # USD Description / Application fits: NAA, Jubilee, 600, 700, 800, 900 series ABC395 $26.99 (1953-57) w/ round ground cable Electrical Outlet Socket (For implements Replaces: NAA5162A, NCA10718A w/ lights) fits: Ford models NOTE: Powder coat Ford red. NOTE: 2 plated brass pins. FDS1235 $69.99 Battery Tray w/ Air Cleaner Mounting Bolts fits: 2N (1942-47) ABC1868Steiner$21.75 Replaces: 2N10732, 2N10734, 2N10735 Connector Plug (For ABC395) NOTE: Powder coat gray. (3.045” long, .760” wide, .340” hole dia. for wires) NOTE: Plated brass pins. Wires FDS029 $64.95 must be soldered or crimped. Battery Tray (Support Assembly) fits: 8N (1947-52), Replaces: 8N10732 ABC2285 $4.99 USA made NOTE: Powder coat Ford red. Electrical Outlet Socket Boot 12 gauge steel. Includes two weld nuts. fits: Tractors using single wire outlet NOTE: 1 wire style. Does not fit ABC395. Battery covers, trays continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 183 Battery covers, trays cont... Restoration quality wiring Part # USD Description / Application harness kits for generators - FDS030 $71.00 Battery Tray (Support Assembly) USA made fits: NAA, Jubilee, 501, 600, 700, 800, 900, NOTE: Wiring harness kits have original 1801 series, 2000, 4000 series (1953-64) gas style braiding and include headlight, wires Replaces: C0NN10732T, NCA10732T and wiring instructions. All terminals USA made NOTE: Powder coat Ford red. are silver soldered and sealed. Wires are individually labeled for ease of installation. 12 gauge steel. Alternator conversion harnesses also FDS1271 $89.95 Battery Tray fits the following diesels w/ available by special order. Call or email for 128 AMP battery: 2000, 2110, 3000, 3100, a quote. 3400, 3500, 3550, 4000, 4110, 4400, 4500, Part # USD Application (5000 gas) (1965-67) Replaces: C5NN10723H FDS470 $154.50 (For 6-volt generator systems only) (8-1/2” wide, 19-1/4” length) fits: 9N, 2N (1939-47) w/ single terminal generator, Replaces: 2N14401, 9N14401B FDS472 $179.99 (For 6-volt generator systems only) fits: 8N up to SN: 263843 w/ front Battery hold downs, parts mounted distributor (1947-50) Part # USD Description / Application Replaces: 8N14401B NOTE: Generator is Ford FDS372 $34.95 Battery Retainer fits: 9N, 2N (1939-47) mounted on the rightInc.® side. New Holland New Replaces: 2N10721 FDS1703 $216.99 (For 6-volt generator systems only) (9-1/8” long x 7-1/16” wide) fits: 8N SN: 263844 & up w/ side mounted NOTE: Improved version to fit 9N. To distributor (1950-52), Replaces: 8N14401C use on 9N must also purchase FDS371 NOTE: Generator is mounted on the left battery hold down pair (9N10728C & side. 9N10748). FDS474 $189.99 (For 6-volt generator systems only) FDS371 $38.95 fits: Jubilee, NAA, 600, 700, 800, 900 gas Battery Hold Down, Pair fits: 9N (1939-42) Parts,series (1953-57) w/out fuel gauge Replaces: 9N10728C (RH), 9N10748 (LH) Replaces: FDN14401B, FAF14401B NOTE: NOTE: Sold as a RH / LH pair. If customer has a fuel gauge will need to

Electrical parts reuse gauge & sending unit wires.

FDS370 $9.95 FDS2869 $264.50 (For generator systems only) fits: 501 - 981 Battery Hold Down Rod fits: 2N, 8N, series, 1811, 2000 4-cyl., 4000 4-cyl. series Jubilee, NAA (1943-54) gas (1957-64) (All using charge indicator Replaces: 2N10728, 8N10728 light), Replaces: C3NN14401 FDS3371 $479.99 (For generator systems only) fits: 2000, FDS369 $23.99 Battery Hold Down fits the following w/ 3000, 4000, 3-cyl. gas (1965-75) (3400, 3500, 6-volt battery: 8N, Jubilee, NAA, 501, 600, 4400, 4500 except light harness) 700, 800, 900, 2000 4-cyl.,Tractor 4000 4-cyl. series (1947-1964) gas, Replaces: NCA10718A (9-3/16” long x 7-1/16” wide; Mounting Restoration quality wiring holes c.c. = 10-1/8”) USA made harness kits for alternators - NOTE: 16 gauge steel. USA made FDS421 $3.95 LH Battery Hold Down Bolt w/ Wing Nut NOTE: Wiring harness kits have original fits: NAA, Jubilee both using FDS030 style braiding and include headlight, wires battery tray, 501, 600, 700, 800, 900, 2000 and wiring instructions. All terminals 4-cyl., 4000 4-cyl. series gas (1953-64) are silver soldered and sealed. Wires are Replaces: NCA10728-A (3” o/a length) individually labeled for ease of installation. ABC474 $21.50SteinerBattery Hold Down fits: 501, 601, 701, 801, Part # USD Application 901, 1801, 2000, 4000 series (1957-64) FDS3792 $209.99 (For 1 wire alternator) fits: 2N, 9N (1939-47) (All 4-cyl. & w/ 12-volt system) FDS3795 $209.99 Replaces: 311099 (For Battery size: 16-1/4” (For 1 wire alternator) fits: 8N up to SN: long x 7-5/8” wide; Mounting holes c.c. = 263843 w/ front mount distributor (1947- 17-1/4) USA made 50) NOTE: Alternator is mounted on the right side. IHS721 $9.75 Universal Battery Retainer J-Bolt (Pair) FDS3798 $227.95 (For 1 wire alternator) fits: 8N SN: fits: Ford models 263844 & up (1950-52) w/ side mounted (5/16”-18 UNC x 10-3/4”) distributor

184 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Restoration quality wiring Economy main wiring harnesses harness kits for alternators - USA made w/ instructions cont... cont... Part # USD Application

Part # USD Application FDS277 $34.99 (For alternator systems only) fits: 8N SN: FDS3774 $229.95 (For 1 wire alternator) fits: Jubilee, NAA, 263844 & up (1950-52) w/ side-mounted 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, distributor & 1-wire alternator 840, 850, 860, 900, 950, 960 (1953-57) gas, LP NOTE: Does not include light wires. FDS3782 $259.95 (For 1 wire alternator) fits: 501, 601, 701, Alternator is mounted on the left side. 801, 901, 1801, 2000 4-cyl., 4000 4-cyl. ABC079 $52.50 (For 6-volt generator systems only) series (1957-64) gas, LP NOTE: Charge fits: NAA, Jubilee, 600, 700, 800, 900 series indicator light will not be functional w/ gas (1953-57), Replaces: FDN14401B this alternator harness. NOTE: Has flame retardant cloth covering. Light wires included. FDS376 $39.99 (For 6-volt generator systems only) Restoration quality light fits: 501, 601, 701, 801, 901 series, 2000 harness kits - USA made 4-cyl., 4000 4-cyl. gas (1957-64) NOTE: Has New Holland flame retardant cloth covering. Does not NOTE: Light harness kits include original Ford style braiding w/ soldered terminals & include ignition switch wires, light wires or fuel sender wires. instruction sheet. Inc.® Part # USD Application

FDS3617 $84.99 Fits: 9N, 2N, 8N, Jubilee, NAA, 600, 700, parts Electrical 800, 900 series (1939-57) Wiring clips Replaces: 8N11653B, 8N14405 NOTE: Sold individually. FDS3621 $86.99 Fits: 501, 601, 701, 801, 901 series, 2000 Part # USD Description / Application 4-cyl., 4000 4-cyl. (1957-64) FDS271 $1.99 Replaces: FAC11653, 310991, 310993 EACH Wiring Clip fits: 9N, 2N, 8N (1939-52) FDS3625 $84.99 Fits: 2000 3-cyl., 3000, 4000 3-cyl. (1965-74) Parts,Headlight wiring to hood (7 required) Replaces: C5NN14N105A, C5NN13A449B, Replaces: 358297S C5NN13N315A FDS269 $3.99 EACH Wiring Clip fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Rear light wire (6 required) Economy main wiring Replaces: 9N17668 (7/16” bolt hole, 1/4” harnesses w/ instructions wire loop opening) FDS267 $3.99 Wiring Clip (For 7/16” hole) fits: 8N up to Part # USD Application EACH SN: 263843 (1947-50) (1 used), SN: 263844 ABC075 $26.99 (For 6-volt generatorTractor systems only) & up (1950-52) (4 used); Wiring harness to fits: 9N, 2N (1939-47) w/ single terminal instrument panel brace (1 used); Harness generator, Replaces: 2N14401, 9N14401C to hood top reinforcement (3 used) NOTE: Has flame retardant cloth Replaces: 51C14197 covering. Does not include ignition FDS268 $4.49 Wiring Clip (For 17/32” hole) fits: 8N up switch & light wires. EACH to SN: 263843 (1947-50); Wiring harness to ABC076 $26.99 (For 6-volt generator systems only) instrument panel brace (1 required) fits: 8N up to SN: 263843 (1947-50) Replaces: 8N14197 USA made w/ front mounted distributor Replaces: 8N14401B NOTE: Has flame FDS270 $11.69 Steinerretardant cloth covering. Does not EACH Wiring Clip fits: 8N, NAA, Jubilee include ignition switch & light wires. (1947-54) Rear lamp wire to brake Generator is mounted on the right side. actuating shaft (2 required) Replaces: 8N14565 USA made ABC077 $26.99 (For 6-volt generator systems only) fits: 8N SN: 263844 & up (1950-52) w/ side ABC545 $5.49 Wiring Clip fits: 2000 3-cyl. - 4140 (1965- mounted distributor, Replaces: 8N14401C EACH NOTE: Has flame retardant cloth 74); Serviceable for 8N - 4000 4-cyl. covering. Does not include ignition (1947-64) Rear light wire to brake switch & light wires. Generator is actuating shaft (2 required) mounted on the left side. Replaces: 354475S2, 380568S36

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 185 Fuse holder Ignition parts cont... Fits: 8000 - 9600, Industrial (1968-76) Part # USD Description / Application USA made Replaces: C7NN14411A Coils, Resistor, parts cont... Description Part # USD ABC4293 $52.50 6-volt Flame Thrower Coil (40000 volts) Fuse Holder...... ABC389...... $10.95 fits: 8N, NAA, Jubilee, 501, 600, 700, 800, NOTE: Rated at 20 AMP; Fits in 1/2" hole. 900, 1801, 2000, 4000 series; Fits other Ford models w/ barrel-type coil (All w/ side mounted distributor) Cigarette lighters Replaces: D3PF12029AA, E8T12029BA USA made NOTE: See website for full Part # USD Description / Application applications. ABC1862 $29.95 6-volt Cigarette Lighter w/ Socket ABC348 $51.50 HOT” Coil (55000-volts) fits: Ford fits: 8N, NAA (1947-54) w/out bracket & models w/ 12-volt system except front w/ 6-volt system, Replaces: 8N9004601 mount distributor tractors NOTE: Anodized aluminum knob NOTE: Use w/ or w/out electronic engraved w/ the word “LIGHTER”. ignitions, Maximum voltage for faster IHS949 $29.95 12-volt Cigarette Lighter w/ Socket starting, reduced plug fouling & longer fits: 8N, NAA (1947-54) w/out bracket plug life. Must use w/ ABC366 resistor. when converted to 12-volt

Ford ABC3161 $5.99 NOTE: Anodized aluminum knob Inc.® Coil Bracket fits: Same as ABC011, New Holland New engraved w/ the word “LIGHTER”. ABC509, ABC4293, ABC348 IHS1784 $24.95 12-volt Cigarette Lighter w/ Socket USA made fits: 2600 - TW35 (1976-90) Replaces: E3NN15760AA NOTE: Black plastic knob w/ the word FDS3719 $7.75 Resistor Assembly fits: 9N, 2N, (8N up ‘’LIGHTER’’ in white print. to SN: 263843) (1939-50) (All w/ front mounted distributor & converted to 12- volt systems), Replaces: 8NE10306 Parts,(.85 OHMS of resistance) Ignition parts NOTE: Used to step down 12-volt Part # USD Description / Application battery. 2 terminal style. Reduces Electrical parts Coils, Resistor, parts voltage to distributor points. 0.85 Ohms of resistance. Resistor gets very hot. FDS072 $31.50 6-volt Distributor Coil fits: 9N, 2N, (8N ABC366 $8.99 Universal 12-volt Voltage Resistor up to SN: 263843) (1939-50) w/ front fits: Ford modelsNOTE: Used to step mounted distributor, Replaces: 9N12024 down 12-volt battery. 2 terminal style. Reduces voltage to distributor points. FDS3835 $30.49 12-volt Distributor Coil fits: 9N, 2N, (8N 2.0 Ohms of resistance. Resistor gets up to SN: 263843) (1939-50)Tractor (All w/ front very hot. mounted distributor), Replaces: 9N12024 Dust Covers NOTE: Other than the factory dash ABC277 $9.49 Dust Cover Assembly w/ Gasket mount resistor, no extra (external) resistor fits: 8N SN: 263844 & up, NAA, Jubilee, is needed. This coil is internally resisted. 501, 600, 700, 800, 900, 1801, 2000, 4000 FDS1137 $5.49 Distributor Coil Retainer Wire fits: 9N, 4-cyl. series gas (1950-64) (All w/ side 2N, (8N up to SN: 263843) (1939-50) w/ mount distributors) front mount distributor Replaces: FAA12239A Replaces: 9N12137 FDS3456 $21.50 Dust Cover Assembly fits: 2000 3-cyl., ABC011 $19.99 Distributor Coil & Mounting Bracket 2600, 2610, 3000, 3400, 3500, 3600, 3610, (6-volt) Steinerfits: 8N SN: 263844 & up, NAA, Jubilee, 4000 3-cyl., 4100, 4400, 4500, 4600, 4610, ABC509 $19.99 501, 600, 700, 800, 900, 1801, 2000, 5000, 6600, (230A - 5550) (1965-82) (12-volt) 4000 series; Fits other Ford models w/ Replaces: C7NF12239A barrel-type coil (All w/ side mounted (2.991” O.D., 0.816” tall) distributor) Distributors, Caps, parts ABC011 Replaces: D3PF12029AA, ABC061 $15.79 E8T12029BA Distributor Cap fits: 9N, 2N, (8N up to ABC509 Replaces: D5TE12029AB SN: 263843) (1939-50) w/ front mount NOTE: ABC509 is internally resisted. distributor, Replaces: 9N12106C See website for full applications.

186 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Ignition parts cont... Ignition parts cont... Part # USD Description / Application Part # USD Description / Application Distributors, Caps, parts cont... Distributors, Caps, parts cont... FDS1150 $4.49 Distributor Cap Spring Clip fits: 9N, 2N, ABC064 $4.99 4-pc. Distributor Gasket Kit fits: 9N, 2N, (8N up to SN: 263843) (1939-50) w/ front (8N up to SN: 263843) (1939-50) w/ front mount distributor, Replaces: 9N12144 mount distributor, Replaces: 9N12104 NOTE: 2 used per tractor; USA made Sold individually. ABC063 $11.99 Distributor Cap fits: 8N SN: 263844 & ABC062 $259.95 up, NAA, Jubilee, 501, 600, 700, 800, 900, Side Mount Distributor (NEW not 1801, 2000, 4000 4-cyl. series (1950-64) w/ Rebuilt) fits: 8N SN: 263844 & up original style side mounted distributor (1950-52), Replaces: 8N12127B Replaces: NCA12106A NOTE: Has external oiler & terminal for FDS224 $8.49 Distributor Cap Clip / Clamp fits: 8N coil wire. Original style. SN: 263844 & up, NAA, Jubilee, 501, 600,

700, 800, 900, 1801, 2000, 4000 4-cyl. series FDS316 $259.95 New Holland (1950-64), 6000 (1961-67) (All w/ side Side Mount Distributor (NEW, not Ford mounted distributor) Rebuilt) w/ Slotted Drive Shaft Replaces: 7RA12144 fits: NAA, JubileeInc.® (1953-54) ABC2633 $34.95 Replaces: FAC12127D Distributor Cap (For Lucas Distributor) fits: Fordson Dexta (1957-61) parts Electrical NOTE: Cap is threaded for spark plug FDS317 $259.95 Side Mount Distributor (NEW, not wire ends. Rebuilt) w/ Hex Drive Shaft fits: 501, 600, 700, 800, 900, 1801, 2000, ABC128 $8.99 Distributor Cap fits: 2000, 2600, 2610, 4000 4-cyl. series (1954-64) 2810, 2910, 3000, 3400, 3500, 3600, 3610, Replaces: FDN12127A, 311185 4000, 4100, 4400, 4500, 4600, 4610 3-cyl. Parts,NOTE: 1/4” hex drive end. gas (1965-82), Replaces: C5NF12106A, E3NN12106A, 83937262 FDS3253 $31.50 5-pc. Distributor Bushing & Shim Kit FDS469 $6.49 Rotor Button fits: 9N, 2N, (8N up to SN: fits: Jubilee - 4000 4-cyl. (1953-64) 263843) (1939-50) (All w/ front mount USA made NOTE: Bushing must be distributor), Replaces: B2NN12200A, sized to shaft after installation. 87727246 FDS471 $6.49 Rotor Button fits: 8N SN: 263844 & up, FDS281 $4.99 NAA - 4000 4-cyl. series (1950-64), 6000 Primary Conductor (For side mounted (1961-67) (All w/ side mount distributor) distributors) fits: 8N SN: 263844 & up, Replaces: C0NN12200A, FAB12200A NAA, Jubilee, 501, 600, 700, 800, 900, Tractor 1801, 2000, 4000 4-cyl. series (1950-64) ABC159 $4.75 Rotor Clip fits: Late 8N SN: 263844 & up, Replaces: 8N12209 NOTE: Copper. NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. gas (1950-64), 6000 (1961-67) FDS3823 $6.99 Distributor Primary Screw & Insulator (All w/ side mounted distributor) Kit, Power Inlet fits: 8N SN: 263844 & up, Replaces: 8N12213 Jubilee, NAA, 501, 600, 601, 700, 701, 800, FDS4236 $4.99 Rotor Button fits: 2000, 2600, 2610, 2810, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl. 2910, 3000, 3400, 3500, 3600, 3610, 4000, series (1950-64) NOTE: See website 4100, 4400, 4500, 4600, 4610 3-cyl., 5000 - for all applications & replacement 6600 4-cyl. (1965-82) numbers. Replaces: C5NF12200A Steiner FDS3329 $199.95 Distributor (New, not Rebuilt) fits: 2000, ABC060 $199.50 2600, 2610, 3000, 3400, 3500, 3600, 3610, Front Mount Distributor (NEW, not 4000, 4100, 4400, 4500, 4600, 4610 Rebuilt) fits: 9N, 2N, (8N up to SN: (All 3-cyl. gas) (1965-82) 263843) (1939-50), Replaces: 9N12100 Replaces: F1NN12100AA NOTE: This is an improved design using a mechanical FDS1144 $5.49 Distributor Breaker Plate Retaining Clip advance. Tune-up parts interchange fits: 9N, 2N, (8N up to SN: 263843) (1939- w/ the original. See website for all 50) w/ front mount distributor applications. Replaces: 91A12146 Ignition parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 187 Ignition parts cont... Ignition parts cont... Part # USD Description / Application Part # USD Description / Application Spark Plug Wiring Sets - USA made, parts Spark Plug Wiring Sets - USA made, parts cont... FDS467 $15.99 Spark Plug Wiring Set fits: 8N SN: FDS2543 $51.99 Spark Plug Wire Set fits: 5000, 5100, 5190, 263844 & up (1950-52) w/ side mounted 5200, 5340, 6600; Industrial: 5500, 5550 distributor (generator on left side) 4-cyl. (1965-81), Replaces: D7NN12287A, NOTE: Copper core w/ aluminum DHPN12259A NOTE: Silicone core. coating to prevent corrosion, waterproof Waterproof neoprene. Pre-assembled, neoprene. Pre-Assembled - No cutting no cutting or fitting required. Must use or fitting required. w/ aftermarket coil ABC509 etc., as coil FDS4320 $16.99 wire boot will not fit original Ford coil. NEW! Spark Plug Wiring Set ABC2863 $20.99 (Pre-assembled) w/ 90 degree Boots Spark Plug Wiring Set w/ Straight Boots fits: Same as FDS467, Replaces: 8N12259 fits: 6-cyl. modelsNOTE: Copper core w/ NOTE: Graphite carbon core w/ aluminum coating to prevent corrosion, waterproof silicone outer jacket. waterproof neoprene. Cut to length. Use w/ electronic ignitions. ABC4296 $21.45 NEW! Spark Plug Wiring Set w/ Straight FDS1756 $6.49 Boots fits: 6-cyl. models Spark Plug Wire Grommet fits: 8N SN: Ford NOTE: Graphite carbon core w/ 263844 & up (1950-52) w/ side mounted Inc.® waterproof silicone outer jacket. Cut to New Holland New distributor, Replaces: 7RA12297 length. Use w/ electronic ignitions. (0.708” I.D., 0.880” & 1.180” O.D., 0.970” FDS149 $12.99 length) NOTE: Holds 4 plug wires Spark Plug Wiring Set w/ 90 degree together. Boots fits: 9N - 4000 4-cyl. (1939-64) NOTE: Copper core w/ aluminum FDS331 $15.99 coating to prevent corrosion, waterproof Spark Plug Wiring Set fits: NAA, Jubilee, neoprene. Cut to length. 501, 600, 700, 800, 900 series, 1801, 2000, 4000 4-cyl. series (1953-64) ABC4309Parts, $15.99 NEW! Spark Plug Wiring Set w/ 90 NOTE: Copper core w/ aluminum degree Boots fits: 4-cyl. models coating to prevent corrosion, waterproof NOTE: Graphite carbon core w/

Electrical parts neoprene. Pre-Assembled - No cutting waterproof silicone outer jacket. Use w/ or fitting required. electronic ignitions. Cut to length. ABC326 $21.50 Spark Plug Wiring Set w/ 90 degree FDS4315 $15.99 NEW! Spark Plug Wiring Set Boots fits: 6-cyl. models (35” long wires) (Pre-assembled) w/ 90 degree Boots NOTE: Copper core w/ aluminum fits: Same as FDS331 coating to prevent corrosion, waterproof NOTE: Graphite carbon core w/ neoprene. Cut to length. waterproof silicone outer jacket. ABC4300 $21.50 NEW! Spark Plug Wiring Set Use w/ electronic ignitions.Tractor w/ 90 degree Boots fits: 6-cyl. models (35” long wires) FDS1754 $3.25 Spark Plug Wire Rubber Retainer NOTE: Graphite carbon core w/ fits: 8N SN: 263844 & up (1950-52) w/ waterproof silicone outer jacket. Cut to side mounted distributor (1 used); NAA - length. Use w/ electronic ignitions. 4000 4-cyl. (1953-64) (2 used) Spark Plugs (Autolite) Replaces: 7RA12271 (0.508” I.D., 0.857” NOTE: Check spark plug specifications before ordering as some O.D., 0.125” thick) USA made models may use more than one type. NOTE: Sold individually. Holds #3 & #4 plug wires together on 8N (1 ABC172 $4.49 Steinerused). Holds #1, #2 & #3, #4 plug wires Fits: 9N, 2N, 8N (1939-50) w/ front together on NAA & up (2 used). mount distributor FDS2539 $38.99 Spark Plug Wire Set fits: 2000 3-cyl. - ABC172 specifications: 14 mm thread, 7/16" reach, 13/16" hex, 4610 (1965-82), Replaces: DDPN12259A, Autolite 437, Plug Gap .025" DHPN12259A NOTE: Silicone Core. ABC322 $4.49 Fits: 8N w/ side mount distributor, Waterproof neoprene. Pre-assembled, NAA, Jubilee, 501, 600, 700, 800, 900, no cutting or fitting required. Must use 1801, 2000, 4000 4-cyl. series (1950-64) w/ aftermarket coil ABC509 etc., as coil ABC322 specifications: 14 mm thread, 7/16" reach, 13/16" hex, wire boot will not fit original Ford coil. Autolite 216 Plug Gap .025"

188 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Ignition parts cont... Glow plugs Part # USD Description / Application Part # USD Description / Application Spark Plugs (Autolite) cont... FDS4676 $29.99 NEW! Glow Plug fits: 1000, 1500, 1600, ABC323 $4.49 Fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 1700, Replaces: SBA185366010 3610, 4000 3-cyl., 4600, 4610, 5000 (M14 x 1.25 mm thread) (1965-82) ABC4707 $17.99 NEW! Glow Plug fits: 1100, 1110, 1120, ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex, 1200, 1210, 1215, 1220, 1300, 1320, 1510, Autolite 405, Plug Gap .025" 1530, 1620, 1630, 1710, 1715, 1720, Ignition Tune-Up Kits, parts 1725, 1900, 1910, 1925, 2110, Replaces: SBA185366060 (M10 x 1.25 mm thread) FDS473 $21.50 Ignition Tune-Up Kit fits: 9N, 2N, (8N up to SN: 263843) (1939-50) w/ front mounted distributor NOTE: Kit includes points, condenser & rotor; Point Gap Electronic ignition .015. conversion kits - USA made FDS3956 $5.99 Front Mount Distributor Breaker Point Precisely engineered breakerless ignition New Holland Set fits: 9N, 2N, 8N up to SN: 263843 delivers twice the energy of conventional

(All w/ front mounted distributor) systems. No points to burn, pit or corrode. Ford (1939-50), Replaces: 9N12107, Fits entirely inside the distributor and A0NN12107A (Point Gap .015”) backed by a manufacturerInc.® 30 month limited warranty. Kits require a higher voltage coil FDS3970 $3.50 Front Mount Distributor Condenser and graphite carbon core spark plug wires - fits: 9N, 2N, 8N up to SN: 263843 (All w/ parts Electrical available separately. front mounted distributor) (1939-50) Replaces: A0NN12300A, 87741868GV Part # USD Description / Application EIGN16 $189.99 FDS137 $36.99 Ignition Tune-Up Kit fits: 9N, 2N, (8N Electronic Ignition Conversion Kit up to SN: 263843) (1939-50) w/ front (For 6-v positive ground system) mounted distributor NOTE: Kit includes fits: 9N, 2N; 8N up to SN: 263843 (1939-50) points, condenser, rotor, spark plugs, Parts,w/ front mount distributor 9N12100 ABC064 4-pc. distributor gasket kit. NOTE: Also order ABC4309 spark plug Spark Plug Gap .025 & Point Gap .015. wires. EIGN15 $189.99 Electronic Ignition Conversion Kit FDS3984 $4.99 Autolite Ignition Points only (For 12-v negative ground system) fits: 8N SN: 263844 & up w/ side fits: Same as EIGN16 NOTE: Also order mounted distributor, NAA, Jubilee, 501, ABC4309 spark plug wires & (FDS3835 600, 700, 800, 900, 1801, 2000, 4000 series coil if needed). (1950-64), 6000, Replaces: 87744965 NOTE: Point Gap 0.025”. EIGN04 $154.99 Electronic Ignition Conversion Kit (For 6-v positive ground system) FDS476 $13.39 Ignition Tune-Up Kit fits: 8N SN: 263844 fits: 8N SN: 263844 & up w/ side mounted & up, NAA, Jubilee, 501, 600, 700, Tractor distributor; Jubilee, Golden Jubilee, NAA, 800, 900, 1801, 2000, 4000 series (1950- 600, 601, 700, 701, 800, 801, 900, 901, 2000 64), 6000 (1961-67) w/ side mounted 4-cyl., 4000 4-cyl. (1950-64) distributor NOTE: Kit includes points, NOTE: Must use w/ ABC4293 high condenser, rotor; Point Gap .025. voltage coil & ABC4309, or (FDS4315 FDS138 $29.99 Ignition Tune-Up Kit fits: 8N SN: 263844 NAA up) spark plug wires. & up, NAA, Jubilee, 501, 600, 700, 800, EIGN03 $154.99 Electronic Ignition Conversion Kit 900, 1801, 2000, 4000 series (1950-64) w/ (For 12-v negative ground system) side mounted distributor NOTE: Kit fits: Same as EIGN04 NOTE: Must use contains points, condenser, rotor, spark w/ ABC348 high voltage coil, ABC366 Steinerplugs. Spark Plug & Point Gap .025. resistor & ABC4309 or (FDS4315 NAA FDS420 $31.25 Ignition Tune-Up Kit fits: 2000, 2110, up) spark plug wires. 2310, 2600, 2610, 2810, 2910, 3000, 3600, EIGN02 $154.99 Electronic Ignition Conversion Kit 3610, 4000, 4110, 4600, 4610 (All 3-cyl. (For 12-v negative ground system) 1965-82); Industrials: 230A, 231, 334, 340, fits: 2000, 2600, 2610, 3000, 3400, 3500, 340A, 420, 445, 515, 531, 535, 540, 540A, 3600, 3610, 4000, 4100, 4400, 4500, 4600, 545, 3400, 3500, 4400, 4500 w/ original 4610 (All 3-cyl. gas) (1965-82) Autolite distributor NOTE: Kit includes NOTE: Must use w/ ABC348 high voltage points, condenser, rotor, spark plugs. coil, ABC366 resistor & FDS2539 spark Spark Plug & Point Gap .025. plug wires.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 189 Electrical resistor assys., parts Generators, parts cont...

Part # USD Description / Application Part # USD Description / Application

FDS263 $19.99 FDS3752 $14.95 Tachometer Drive Assembly (For Lucas Resistor Assembly fits: 9N, 2N (1939-47) Generators) fits: 2000, 3000, 3400, 4000, Replaces: A8NN12250B 4400, 4500, 5000, 8000, 9000 (1965-74) (5/16” machine screw mount O.E.M. style) Replaces: C5NF17B282B NOTE: Fits FDS403 generator.

FDS264 $19.99 ABC519 $14.45 Generator Tag w/ 2 Rivets fits: Tractors Resistor Assembly fits: 8N up to SN: & Industrial using Autolite generator 263843 (1947-50) (2.300” length, .732” wide, .145” dia. rivet Replaces: A8NN12250A hole, 2” c.c. rivet holes) USA made (3/16” machine screw mount O.E.M. style) NOTE: Anodized aluminum. Customer must stamp numbers. FDS397 $12.99 Terminal Junction Block fits: 8N SN: ABC072 $24.95 263844 & up w/ side mounted distributor, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, Generator Cut-Out Assembly fits: 9N, 2N 2000 4-cyl., 4000 4-cyl. series (1950-64) (1939-47), Replaces: B0NN10505A Replaces: 8NNN14448A Ford ABC366 $8.99 Universal 12-volt Voltage Resistor Inc.® fits: Ford models NOTE: Used to step New Holland New down 12-volt battery. 2 terminal style. Reduces voltage to distributor points. 2.0 Voltage regulators Ohms of resistance. Resistor gets very hot. Part # USD Description / Application ABC071 $34.95

Generators, parts 6-volt Voltage Regulator (3-Terminal) w/ Mounting Plate fits: 8N up to SN: 263843 Part # USD Description / Application Parts,(1947-50) w/ front mount distributor FDS298 $159.95 Replaces: 8N10505B 6-volt Generator (NEW, not Rebuilt)

Electrical parts w/ Pulley fits: 9N, 2N (1940-47) Replaces: 2N10000 ABC073 $28.95 NOTE: Single terminal. 6-volt Voltage Regulator (3-Terminal) FDS436 $25.99 Generator Pulley, Threaded fits: 8N SN: 263844 & up (1950-52) w/ side fits: 9N, 2N (1939-47) mount distributor, Replaces: 8N10505C Replaces: 9N10130B (9/16” belt width) USA made ABC3202 $14.95 TractorABC074 $28.95 Generator Pulley w/ Keyway fits: 8N (1947-52), Replaces: 8N10130A 6-volt Voltage Regulator (3-Terminal) (9/16” belt width) fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series gas (1953-64) FDS434 $36.50 Replaces: FAG10505A Generator Pulley w/ Keyway (For 5/8” belt only) fits: NAA, Jubilee, Golden ABC1164 $33.50 Jubilee (1953-54), Replaces: FAC10130B 12-volt Voltage Regulator (3-Terminal) fits: NAA, Jubilee, 501, 600, 700, 800, 900, FDS403 $119.99Steiner 1801, 2000, 4000 4-cyl. series gas, diesel 12-volt Generator (NEW not Rebuilt) w/ (1953-64), Replaces: C0NF10505A Tach Drive w/out Pulley fits: 2000, 3000, 3400, 4000, 4400, 4500, 5000, 8000, 9000 (1965-74), Replaces: C7NN10000C FDS435 $29.95 12-volt Voltage Regulator (6 Spade FDS3742 $19.95 Generator Pulley w/ Keyway Terminal) fits: 2000, 3000, 3400, 4000, 4400, fits: Same as FDS403 (1965-74) 4500, 5000, 7000, 8000, 9000 (1965-74) Replaces: C5NF10196B, 81812544 Replaces: C7NN10505E, D0NN10505A, (1/2” belt width) NOTE: Fits tractors w/ D0NN10505B original Lucas generator.

190 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Alternators, parts Alternator conversion kits, parts cont... NOTE: Alternators are NEW not rebuilt • To convert Part # USD Description / Application 6-volt to 12-volt system. For negative ground systems. FDS1089 $45.00 Part # USD Description / Application Alternator Bracket Kit fits: 9N, 2N, (8N ABC3551 $149.95 Mini 35 Amp Alternator w/ Pulley up to SN: 263843) (1939-50) (All w/ front fits: Ford models requiring a smaller dia. mounted distributor) USA made alternator for clearance (4-1/2” housing dia., 2-3/4” pulley O.D., 1/2” belt width) NOTE: For 12-volt negative ground FDS1084B $4.95 systems only. Simple 1 wire alternator hook up: Run a wire from the alternator Bolt Kit only (For FDS1084) USA made through the ammeter to positive side of battery. Must rev the engine to 800 - 850 RPM in order to self-excite. Includes instructions. FDS1097 $179.99 Alternator Conversion Kit (For negative ABC2315 $34.95 ground systems) fits: 8N SN: 263844 & up (1950-52) w/ side mount distributor New Holland Alternator Pulley (For ABC3551) NOTE: Kit includes alternator, bracket Ford (0.587” I.D., 1.437” o/a length, kit, internally resisted 12-volt coil, USA 3” pulley O.D., 5/8” belt width) made wiringInc.® harness, instructions. Must use existing fan belt. FDS1099 $45.00 ABC418 $99.95 63 Amp Alternator w/ Pulley parts Electrical fits: Ford models (6-1/4” housing dia., Alternator Bracket Kit fits: Late 8N (SN: 2-1/2” pulley O.D., 5/8” belt width) 263844 & up) (1950-52) w/ side mounted NOTE: For 12-volt negative ground distributor systems only. Simple 1-wire alternator hook up: Run a wire from alternator FDS1102 $179.99 through ammeter to positive side of Alternator Conversion Kit (For negative Parts,ground systems) fits: NAA, Jubilee, battery! Must rev engine to 800 - 850 RPM in order to self excite. Golden Jubilee (1953-54) NOTE: Kit includes alternator, ABC1426 $19.95 internally resisted 12-volt coil, USA Pulley only (For ABC418) made wiring harness, instructions. (.670” shaft dia., 3-3/16” pulley O.D., Must use existing fan belt. 1/2” belt width) FDS1103 $44.99 Alternator Bracket Kit fits: NAA, Jubilee, ABC495 $20.55 501, 600, 601, 700, 701, 800, 801, 900, Pulley only (For ABC418) 901, 1801, 2000 4-cyl., 4000 4-cyl. series (.670” shaft dia., 2-1/2”Tractor pulley O.D., (1953-64) 5/8” belt width) FDS1106 $179.99 Alternator Conversion Kit (For negative ground systems) fits: 501, 600, 700, 800, See the following for custom bracket kits 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas (1954-64) NOTE: Kit includes alternator, bracket kit, belt, internally Alternator conversion kits, parts resisted 12-volt coil, USA made wiring NOTE: The following alternator conversion kits will update harness, instructions. older 6-volt tractors to 12-volt charging system. Does not FDS3466 $179.99 Alternator Conversion Kit (For negative include 12-v fuel gauge, 12-v sending unit, 60 amp ammeter & Steiner ground systems) fits: 2000 3-cyl., 3000, 12-v light bulbs, but can be purchased separately. 3400, 3500, 3550, 4000 3-cyl., 4400, 4500, Part # USD Description / Application 5000, 5500, 6500, 7000 series gas, diesel FDS1084 $184.95 Alternator Conversion Kit (For negative (1965-74) NOTE: Kit includes alternator ground systems) fits: 9N, 2N, (8N up w/ rear mounted tach drive, brackets, to SN: 263843) (1939-50) (All w/ front adapter wire w/ terminal ends, mount distributors) NOTE: Kit includes hardware, instruction sheet. Replaces alternator, USA made bracket kit, belt, the original Lucas generator. Works internally resisted 12-volt coil, USA w/ existing FDS389 generator cluster made wiring harness, instructions. gauge.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 191 Starters, parts Starters, parts cont...

Part # USD Description / Application Part # USD Description / Application FDS297 $149.99 Manifold Heaters cont... Starter (NEW, not Rebuilt) w/ Drive (Bendix) fits: 9N, 2N, 8N (1939-52) ABC4232 $19.99 Diesel Intake Manifold Heater / Replaces: 8N11001 (starter), 52-11350C Thermostart, Glow Plug fits: 3010S, (drive) 3830, 4010S, 4030 3-cyl., 4230, 4430, 4835, 5010S, 5530, 5635, 6530, 6635, 7530, 7635, ABC129 $28.95 TD55D - TD4040F, TN55 - TN95 (1992 - Ratchet Style Starter Drive (Bendix) 2009), Replaces: 5161845 Assembly fits: 9N, 2N, 8N (1939-52) (Eyelet terminal, 7/8” UNF mounting Replaces: 52-11350C thread, 3/8” UNF fuel line thread) NOTE: See website for all applications. ABC227 $41.75 Ratchet Style Starter Drive (Bendix) Starter Solenoid Relay Assemblies, parts Assembly fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series ABC068 $12.99 (1953-64) (All 4-cyl.) gas, LP, diesel Starter Solenoid Relay Assembly Replaces: C1AF11350A (3 Post) Saddle Mount fits: 8N (1947-52) FDS324 $169.99 Starter (NEW, not Rebuilt) w/ Drive Replaces: 8N11450 NOTE: Will work (Bendix) fits: NAA, Jubilee, 501, 600, on 6-volt or 12-volt systems. Ford 700, 800, 900, 1801, 1811, 2000, 4000 Inc.®

New Holland New series (1953-64) 4-cyl. gas, LP, diesel ABC069 $16.49 Replaces: C3NF11002D, C3NF11001B, Starter Solenoid Relay Assembly C3NF11002E (3 Post) Flat Mount fits: NAA, Jubilee, 600, 700, 800, 900 (1953-57) 4-cyl. gas FDS3649 $139.99 12-volt Starter (New, not Rebuilt) Replaces: NCA11450A NOTE: Will w/ Solenoid & Drive (Bendix) fits the work on 6-volt or 12- volt systems. following gas, LP: 2000 3-cyl., 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000 ABC3919 $12.99 3-cyl., 4400, 4500, 4600, 4610, (5000 w/ 8 6-volt Starter Solenoid (4 Post) Flat speed), 6600; 1965-6/1982 Industrials Parts,Mount fits: 501, 601, 701, 801, 901, 2000 Replaces: D7NN11001A (4-1/2” O.D. 4-cyl., 4000 4-cyl. gas series (1957-64) housing) NOTE: 10 tooth drive. Will Replaces: 311007, 311007FR, Electrical parts not fit diesels. See website for all 311007FRGV applications. FDS282 $20.75 FDS390 $179.99 12-volt Starter (New, not Rebuilt) 12-volt Starter Solenoid Relay Assembly w/ Solenoid & Starter Drive fits the (4 Post) Flat Mount fits: 501, 601, 701, following diesels: 231, 335, 340, 445, 531, 801, 901, 1801, 2000, 4000 4-cyl. series 540, 550, 555, 2000 3-cyl., 2310, 2600, (1957-64) except Lucas equipped, 6000 2610, 2810, 2910, 3000, 3400, 3500, 3600, gas; Activates manifold heater on 6000 3610, 3910, 4000 3-cyl.,Tractor 4600, 4610, 5000, diesel, Replaces: 311006 5600, 5610, 6600, 6610, 7000, 7600, 7610, 7710, 8000, 8600, 9000 (1965-92) ABC139 $15.75 12-volt Starter Solenoid Relay Assembly Replaces: D4NN11000BR, (4 Post) Flat Mount fits the following D8NN11000CE (5” O.D. housing) gas, LP: 2000 3-cyl., 2600, 2610, 3000, ABC517 $14.95 Starter Tag w/ (2) Rivets fits: Tractors & 3400, 3500, 3600, 3610, 4000 3-cyl., Industrial using Autolite starters 4400, 4500, 4600, 4610, (5000 w/ 8 (2.955” length, .915” wide, .140” dia. speed), 6600; 1965-6/1982 Industrials rivet holes, 2.650” c.c. rivet holes) w/ 4-1/2” dia. starter, Replaces: USA made NOTE: Anodized D2AF11450AA, 76919 NOTE: Do not aluminum. Customer must stamp use the “I” terminal if replacing a Steinernumbers. 3-terminal switch. Manifold Heaters ABC508 $5.75 Starter or Solenoid Terminal Repair ABC4218 $12.75 Diesel Intake Manifold Heater / Stud (For tractors using 5/16” x 18 NC Thermostart, Glow Plug fits: 2000 starter terminals) NOTE: Brass. - 7000, 2310 - 7710, 2600 - 7700, 3330 - 8630, 4340 - 8340, TS90 - TS115, TM115 - ABC506 $5.75 TM190, TW5, TW35; IND: 230A - 655A, Starter or Solenoid Terminal Repair 345C - 655C, 345D - 675E, 3400, 3550 - Stud (For tractors using 5/16” x 24 NF 5550 (1965-99), Replaces: C5NE9A436A starter terminals) NOTE: Brass.

192 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Starters, parts cont... Starters, parts cont... Part # USD Description / Application Part # USD Description / Application Covers Ignition / Key Switches FDS340 $8.49 Rubber Cover (For starter control wire ABC065 $13.59 Ignition / Key Switch w/ (2) Keys & terminal - goes on wire to solenoid) Mounting Nut fits: Ford models (1939- fits: 8N, NAA, Jubilee, 501, 600, 700, 64) except Dexta & Fordson Major 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. Replaces: 8N3679C NOTE: 2 wire series (1947-64), Replaces: 8N11115 switch. May have to drill hole to 0.800” on some applications. FDS341 $5.49 Rubber Cover (For starter push switch) fits: 8N, NAA, Jubilee, 501, 600, 700, IHS760 $19.95 Ignition / Key Switch w/ (2) Keys & 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. Mounting Nut fits: Ford models (1939- series (1947-64), Replaces: 8N11113 64) except Dexta & Fordson Major Replaces: 8N3679C USA made FDS342 $12.85 Rubber Cover (For battery cable to NOTE: 2 spade terminal switch. May starter solenoid) fits: 8N, NAA, Jubilee have to drill hole to 0.800” on some (1947-54), Replaces: 86H14321A,

applications. New Holland C7NN14321A ABC400 $16.39 Ignition / Key Switch w/ (2) Keys Ford Push Button Switches & Mounting Nut fits: Ag & Light ABC4015 $25.99 Industrial equipmentInc.® (Premium) (3/4” dia. thread) NOTE: Four stud type terminals. Heavy Duty Manual Starter Switch parts Electrical FDS330 $15.35 Ignition / Key Switch w/ (2) Keys (Base Mount) fits: 9N up to SN: 12499 (For tractors w/ cold start) fits: 1965-94 (1939-40), Replaces: 9N11450A, Delco gas, diesel (except compacts); 230A, ABC066 $16.40 405C (1-3/4” c.c. mounting holes, fits in -750 Industrials; 2000 - 7000, 7100 - 7700, (Economy) 7/8” hole) NOTE: Will work on 6-volt 8000 - 9700, 2310 - 8210, 8530 - 8830, or 12-volt systems. TW5 - TW35, 3230 - 4830 Parts,Replaces: C5NN11N572A, 82849085 NOTE: Seven spade terminal.

FDS313 $25.99 FDS400 $3.99 Starter Push Switch fits: 9N SN: 12500 & LUCAS Ignition Key fits: Same as up, 2N (1940-47), Replaces: 9N11450B FDS330, Replaces: E7NN11603AA (2-3/4” c.c. bolt holes) NOTE: Restoration quality. ABC4308 $49.99 NEW! Ignition Switch w/ (2) Keys & Weather Cap fits: 1000, 1100, 1110, 1200, ABC067 $25.99 Starter Push Switch w/ Mounting 1210, 1300, 1310, 1500, 1510, 1600, 1700, Gasket fits: 8N, NAA, Jubilee, 501, 1710, 1900, 1910, 2110 Japan built, (1120, 600, 700, 800, 900, 1801, 2000, 4000 1215, 1220, 1320, 1520, 1620, 1720, 1920, 4-cyl. series (1947-64) (All w/ standard Tractor 2120 Japan built all 8/92 to 12/94), transmission), Replaces: 8N11500 (1715, 3415 both 1/1993-12/1994) NOTE: Does not fit Select-O-Speeds. (1973-94), Replaces: SBA38520033, Will work on 6-volt or 12-volt systems. SBA3852019001 (5 screw terminals w/ ABC233 $12.50 Starter Push Switch, Extra heavy duty preheat) NOTE: For some applications momentary push button switch fits: Ag the mounting hole may have to be & Light Industrial equipment slightly enlarged or the alignment tab (Mounting stem 5/8 - 32 UNF thread, removed. Switch may look different 21/32” long) NOTE: Depress button: from original. See our instruction ON; Spring return: OFF. Two screw sheet for new wiring diagram. type terminal. Up to 35-v (DC), rubber Steiner ABC4496 $19.99 cap for dust & moisture protection. Push / Pull Switches NEW! Ignition Switch Wiring Harness fits: Same as ABC4308 ABC398 $8.69 Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment w/ battery ignition FDS1449 $13.95 Neutral Safety Starter Switch fits: 2000 (10-24 UNC knob thread) NOTE: 30 3-cyl. - TW35; Industrials: 230A - 755B AMP, 3/8” dia. thread, two screw type (1965-94), Replaces: C5NN7A247C, terminals, non-fused. This can be used C7NN7A247A, 81817901 on battery ignition systems only.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 193 Light switches Headlights, parts

Part # USD Description / Application Part # USD Description / Application

FDS445 $16.99 Fused Light Switch w/ Metal Knob FDS177 $48.50 Complete Headlight Assembly fits: 9N, fits: 9N, 2N (1939-47), 8N (1947-48) (6-volt) 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, Replaces: 9N11652 NOTE: Uses pig tail FDS213 $48.50 900, 1801, 2000, 2600, 3000, 3600, 4000, connectors. Like original. (12-volt) 4600, 5000, 5600, 7000, 7600, 7700 series (1939-80) FDS349 $15.99 Fused Light Switch fits: 8N (1949-52), FDS177 Replaces: 2N13006C, 310068 NAA, Jubilee (1953-54); Early 600, 700, FDS213 Replaces: 2N13005C, 310068 800, 900 (All up to SN: 10614) (1954) (5-3/4” sealed beam style) Replaces: 8N11654B NOTE: Two screw NOTE: Stamped “TRACT-O-LITE” on type terminals. Like original. housing. MFS119 $15.89 Work Light Toggle Switch (For tail light) ABC450 $14.95 fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, (6-volt) Sealed Beam Bulb (For FDS177, FDS213) 700, 800, 900, 1801, 2000, 4000 4-cyl. ABC443 $15.95 series (1939-64), Replaces: 21C13740, (12-volt) ABC450 Replaces: 4019 8N1374 NOTE: Two spade terminals. ABC443 Replaces: 4419 (5.625” dia.) FDS351 $15.95 Light Switch fits: 501, 600, 700, 800, 900, NOTE: Original style. 1801, 2000, 4000 4-cyl. series (All w/ SN: Ford 10615 & up) (1955-64) Rear view Inc.® New Holland New Replaces: FDN11654A NOTE: Two screw ABC3696 $53.95 12-volt Negative Ground LED Lamp type terminals. Like original. fits: Same as FDS177, FDS213 ABC4279 $8.99 NEW! 3-Position Push / Pull Light (5.730” dia.) NOTE: Direct replacement Switch fits: 2000 3-cyl., 2600, 2610, 2810, for 4419 sealed beam or halogen lamp. 2910, 3000, 3600, 3610, 3900, 3910, 4000 Flood beam pattern. Polarity sensitive, 3-cyl., 4000SU, 4110 3-cyl., 4200, 4600, Rear view negative ground only. 4600SU, 4610, 5000, 5110, 5200, 5600, FDS099 $18.99 5610, 5700, 6600, 6700, 6710, 7000, 7200, (LH) 7600, 7610, 7700, 7710, 7910; Industrial: Parts, 230A, 231-234, 333-340A, 420-445A, 515- Headlight Wing fits: 9N, 2N, Early 8N 555B, 650-655A, 750-755A, 3400, 3550, (1939-49) Electrical parts 4400, 4500, 5500-7500 (3/8” mounting FDS098 $18.99 FDS009 Replaces: 9N13473 thread) NOTE: Serviceable for 1965- (RH) FDS098 Replaces: 9N13472 8/1985. Has 3/8” dia. threaded mount, original had 9/16” threaded mount. Must use w/ flat washer or drill new mounting hole. Non-fused. ABC480 $9.59 Inner Reinforcement Plate FDS4303 $12.99 NEW! 3 Position Fused Push/Pull Light (For Headlight Wing) fits: 9N, 2N, Early Switch fits: 2000 3-cyl., 2600, 2610, 2810, 8N (1939-49), Replaces: 9N13102 2910, 3000, 3600, 3610, 3900,Tractor 3910, 4000 USA made NOTE: Clear zinc-plated. 3-cyl., 4000SU, 4110 3-cyl., 4200, 4600, FDS272 $6.99 Headlight Bracket (Round) fits: Late 8N, 4600SU, 4610, 5000, 5110, 5200, 5600, NAA, Jubilee, 501, 600, 700, 800, 900, 5610, 5700, 6600, 6700, 6710, 7000, 7200, 1801, 2000, 2600, 3000, 3600, 4000, 4600, 7600, 7610, 7700, 7710, 7910; Industrial: 5000, 5600, 7000, 7600, 7700 series (1950- 230A, 231-234, 333-340A, 420-445A, 515- 80); Will also fit 9N, 2N, Early 8N, but 555B, 650-655A, 750-755A, 3400, 3550, not correct, Replaces: 8N13472 4400, 4500, 5500-7500, Replaces: 251405 NOTE: LH & RH are the same; (9/16” threaded mount, 25 amp) Sold individually. NOTE: Knob is not included. FDS494 $6.85 Headlight Reinforcement Washer ABC398 $8.69 SteinerUniversal 2-Position Push / Pull Light fits: Late 8N - 7700 (1950-80) Switch fits: Ag & Light Industrial Replaces: FAA13102A equipment (10-24 UNC knob thread) (2-1/4” O.D., 1/2” center hole) NOTE: 30 AMP, 3/8” dia. thread, two screw type terminals, non-fused. FDS256 $14.95 Light Ring fits: Some 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, JDS631 $13.59 Universal 3-Position Fused Push / 2000, 4000 4-cyl. series (1939-64) Pull Starter & Light Switch fits: Ag & Replaces: C0NN13045A (5-3/4” O.D., Light Industrial equipment w/ voltage 3/4” wide) NOTE: Check width regulator (10-24 UNC knob thread) measurement before ordering. Will fit NOTE: 15 AMP, five terminals, fused. FDS177 & FDS213.

194 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Headlights, parts cont... Headlights, parts cont... Part # USD Description / Application Part # USD Description / Application FDS460 $15.49 Light Ring fits: Some NAA, Jubilee, 501, ABC3028 $13.99 Light Bezel (For ‘Hobbs’ style light w/ 600, 700, 800, 900, 1801, 2000, 2310, 2600, out glare guard) fits: 2600 - TW35 (1975- 2610, 2810, 2910, 3000, 3600, 3610, 4000, 90) (5.250” O.D., 3.675” I.D., 1.125” 4100, 4110, 4600, 4610, 5600, 5700, 6600, wide, 3 outer tabs & 4 inner tabs) 6700, 7600, 7700 (1953-80) NOTE: Rubber. Fits IHS647, but will Replaces: C0NN13045B not fit factory Ford light. (5-3/4” O.D. x 1” wide) NOTE: Check ABC3035 $22.50 Light Bezel (For ‘Hobbs’ Late style w/ width measurement before ordering. glare guard) fits: Tractors w/ ‘Hobbs’ IHS647 $29.95 12-volt Sealed Beam Headlight round lights & 5.250” O.D. bezel when Assembly (For Flat Top Fenders) extended glare guard bezel is desired fits: 2600 - TW35 (1975-90) (5.250” O.D., 3.675” I.D., 2.430” wide, 3 outer tabs & 4 inner tabs) (4-1/2”) NOTE: Post is out of back w/ NOTE: Rubber. Fits IHS647, but will wires through post. not fit factory Ford light. ABC527 $5.49 Concaved Mounting Washer New Holland ABC3514 $41.50 12-volt LED Flood Light Assembly

fits: 2600 - TW35 (1975-90) Ford w/ Bridgelux LED chips fits: 12-volt Replaces: 82858740 applications (1 bolt bottom mount for (2-1/4” O.D., 9/16” center hole) 0.335” mountingInc.® hole) NOTE: 60 degree ABC3441 $64.65 12-volt LED Trapezoid Headlight flood beam pattern. See website for all

Assembly w/ Cree LED chips fits: 2600 - specifications. parts Electrical TW35 (1975-90) (6 LED bulbs, 1/2” rear ABC4116 $72.75 LED Front/Rear Cab or Fender Light stud mount, 4-1/2” dia. bulb) fits Ford/New Holland: 8670 - 8970A, NOTE: Will update your tractor to LED TG210 - TG305, TJ275 - TJ530, T9020 - technology. T9060, Replaces: 178345A1, 92269C1 ABC3500 $64.65 12-volt LED Flood Light Assembly w/ (60 degree flood pattern) NOTE: Cree LED chips fits: 2600 - TW35 (1975- See website for all applications/ Parts,specifications. 90) (6 LED bulbs, 1/2” rear stud mount, 4-1/2” dia. bulb) NOTE: Will update ABC4130 $82.50 LED Front/Rear Cab Light fits Ford/ your tractor to LED technology. New Holland: 8670 - 8970A, TM115 - ABC353 $9.50 TM190, TS90 - TS115 (2 used) (9/93-07) (Lo Beam) 12-volt Sealed Beam Lamp Replaces: 9846125, 9846126; Will work for fits: 2600 - TW35 (1975-90) 82014950, 82014951 NOTE: See website ABC460 $16.50 for all applications. Can also be used on (Hi Beam) ABC353 Replaces: 4411, 312555, 87779219 many other applications as this is a side ABC460 Replaces: 4410 mounted swivel LED light. (4.365” O.D.) ABC359 $12.79 12-volt Bulb (Double contact) w/ Ring NOTE: Check bulbTractor number before fits: 1000, 1300, 1500, 1600, 1700, 1900 Rear view ordering. (1973-83), Replaces: SBA385120010

ABC3474 $49.95 ABC4677 $10.99 NEW! 12-volt Bulb fits: 1110, 1200, 1210 (Trapezoid Replaces: SBA485120100, SBA385100690, pattern) SBA385120430 (35 watts, P15d-3 base) ABC3490 $49.99 12-volt Cree LED Lamp (Flood fits: 2600 - TW35 (1975-90) pattern) ABC3474 Replaces: 4411 Dash lights, parts ABC3490 Replaces: 4410 Fits: NAA, Jubilee, 600, 700, 800, 900 (4-1/2" O.D.) (1953-57), Replaces: NCA13771A, Steiner C3NN14662A Rear view FDS293 ABC355 ABC3447 $10.79 Light Bezel fits: 2600 - 7600, 2310 - 7710, FDS296 ABC356 8000 - 9700, Industrials (1968-85) (All Description Part # USD w/ Ford fender or cab mounted lights) 6-volt Dash Light Assy (For 1-1/8” dia. hole)...... FDS293...... $25.95 Replaces: 83936004 (4.750” O.D., 4.100” 12-volt Dash Light Assy (For 1-1/8” dia. hole)....FDS296...... $25.95 I.D., 1.940” wide, 4 inner tabs, 1 outer locating tab) NOTE: Rubber. See 6-volt Bulb only (For 1-1/8” dia. hole)...... ABC355...... $1.79 website for all applications. 12-volt Bulb only (For 1-1/8” dia. hole)...... ABC356...... $0.99

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 195 Tail, work lights, parts Tail, work lights, parts cont... Need light components? See page 197 Part # USD Description / Application

Part # USD Description / Application ABC3538 $51.95 FDS172 $49.99 12-volt Tail Light Assembly (Solid 12-volt LED Fender & Cab Warning Light Bucket) Serviceable for 9N, 2N, 8N, NAA, w/ amber & red lenses Jubilee, 600, 800 (1939-57) fits: Same as ABC544 (4" dia. w/ 1/2-20" Replaces: 13402, 13466, 13448, 13450, mounting stud) NOTE: See website for 13560, 30178-S, 9N13404 NOTE: For 6-v dimensions & detailed information. bulb order ABC1439. Economy style. See light chart F for subcomponents. ABC4136 $51.50 FDS444 $67.99 12-volt LED Round Fender & Cab Mount 6-volt Duolamp Tail Light Assembly Warning Light fits: Tractors & equipment (License Lamp Window) fits: 9N, 2N, 8N w/ 12-volt systems (5-3/4" O.D.) (1939-52), Replaces: 8N13404 USA made NOTE: 25 LEDs. Amber lens on one side NOTE: Powder coat 8N grey. Restoration & amber / red lens on the other side. quality. For 12-v bulb order ABC345. See Amber view light chart F for subcomponents. ABC4154 $44.99 12-24-volt LED Fender & Cab Mount FDS446 $45.50 6-volt Duolamp Tail Light Assembly Warning Light w/ amber & amber lenses Ford (License Lamp Window) fits: NAA, fits: Tractors & equipmentInc.® w/ 12-24 volt Jubilee (1953-54), Replaces: FAA13402A systems (4" dia.) NOTE: See website for New Holland New USA made NOTE: Powder coat. dimensions & detailed information. Restoration quality. For 12-v bulb order ABC345. See light chart G for ABC3899 $10.95 12-volt LED Flasher Unit fits: Tractors, subcomponents. Combines, Industrials using LED FDS448 $66.95 6-volt Duolamp Tail Light Assembly warning lights (.230" dia. single fits: 600, 700, 800, 900 series (1954-57) bolt mount, 1 to 150 watt, compact Replaces: NCA13402A NOTE: Powder 1.090" across x 1.630" tall w/ 2 spade connections) NOTE: One flasher can coat. Restoration quality. For 12-v bulb Parts, flash (4) lights simultaneously or order order ABC345. See light chart G for (1) flasher per light for separate flashes. subcomponents.

Electrical parts Use w/ ABC3538 LED light. FDS442 $67.99 6-volt Duolamp Tail Light Assembly ABC546 $29.99 12-volt Fender & Cab Warning Light fits the following tractors: 340A - 545, w/ 1 amber lens, 1 red lens, amber side 601, 701, 801, 901, 1801, 2000 - 2810, marker, single contact bulb & black ABS 3000 - 3910, 4000, 4000SU, 4100, 4110, base Serviceable for Ford models 4400, 4500, 4600SU, 4610, 5000 - 5700, (All using rectangular warning lights) 6000, 6600, 6700, 7000 - 7700, 8000 - 9700, (4-1/2" dia. w/ 1/2-20" mounting stud) TW5 - TW35 (1957 -90), Replaces: 310064, C5NN13403A, D2NN13403ATractorABC4098 $41.99 NOTE: Powder coat. Restoration quality. 12-volt LED Fender & Cab Mount For 12-v bulb order ABC345. See light Warning Light w/ amber / amber lenses chart G for subcomponents. Serviceable for Ford models (All using ABC548 $10.99 rectangular warning lights) (4-1/2" dia.) 12-volt Round Tail Light Assembly w/ licensed lamp window, red lens & black ABS base Serviceable for Ford ABC1243 $5.99 Amber Lens only (For ABC4098) models (4” dia.; (2) 1/4” dia. stud FDS320 $133.50 mounts, 1-7/8” c.c. studs) 6-volt Work Light Assembly w/ Frosted Glass Lens & On / Off Switch ABC544 $17.99 12-volt Fender & Cab Warning Light Steiner fits: 9N, 2N, 8N (1947-51) w/ 2 amber lenses, double contact bulb Replaces: 8N15500E (4-1/2" O.D.) & black die cast baseServiceable for 2000 NOTE: Restoration quality. 3-cyl. - TW35 (1965-90) (All using round warning light), Replaces: C5NN12N359E, FDS1105 $52.50 D4NN13N359A, D6NN13N359B, D9NN13N359AA (4” dia. w/ 1/2-20” 6-volt Sealed Beam Bulb w/ Frosted mounting stud) Glass & Rings fits: Same as FDS320 ABC1439 $3.99 6-volt Bulb, Double contact Replaces: 8N15514 USA made (For ABC544, ABC548)

196 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tail, work lights, parts cont... Tail, work lights, parts cont... Part # USD Description / Application Part # USD Description / Application FDS323 $133.50 ABC352 $9.50 6-volt Work Light Assembly w/ Dimpled (6-volt) Glass Lens & On / Off Switch fits: 8N, ABC353 $9.50 Sealed Beam Bulb fits: Same as FDS325, NAA, Jubilee, 600, 700, 800, 900 (1951-57) (12-volt) FDS327 Replaces: 8N15500L (4-1/2" O.D.) ABC352 Replaces: 4511 NOTE: Restoration quality. ABC353 Replaces: 4411 (4-1/2" dia.) FDS1109 $52.50 Rear view (6-volt) Sealed Beam Bulb w/ Dimpled Glass FDS1101 $51.95 fits: Same as FDS323 FDS171 $10.99 (12-volt) FDS1109 Replaces: 8N15514 EACH Tail Light Bracket fits: 9N, 2N, 8N, NAA, FDS1101 Replaces: FDF-15514 Jubilee (1939-54), Replaces: 8N13423 (4-1/2" dia.) USA made NOTE: Mounts to FDS170. 1 per bracket;

Sold individually. RH & LH are the New Holland same.

FDS325 $94.50 Ford (6-volt) Work Light Assembly w/ Sealed Beam FDS327 $92.95 FDS170 $48.99 Lens & On / Off Switch fits: 8N, NAA, Inc.® (12-volt) Jubilee, 501, 600, 700, 800, 900, 1801, 2000 Fender Light Brackets, Pair fits: 9N, 2N, 4-cyl., 4000 4-cyl. series (1947-64) parts Electrical 8N, NAA, Jubilee (1939-54) Replaces: 8N15500 (5-1/4" O.D. housing) Replaces: 9N13470, 9N13471 NOTE: Uses 4-1/2" O.D. sealed beam NOTE: Ford grey. Sold as pair. bulb. Restoration quality. Parts, Light subcomponents Need just a lens, bulb or gasket? This is the place for you. For application information see the light assemblies on the previous pages or go to www.SteinerTractor.com

Light chart F FDS454 FDS458 TractorThe light subcomponents below fit FDS172, FDS444: FDS454 $15.95 Glass Tail Light Lens USA made

FDS458GK FDS454GK $10.55 Tail Light Lens Gasket Set USA made FDS456 $15.95 Stainless Steel Light Ring (Bezel) FDS454GK FDS458 $13.99 Tail Light License Light Window Glass Lens USA made ABC1439 FDS458GK $5.65 Gasket only (For FDS458) USA made ABC1439 $3.99 6-volt Bulb, Double contact (For FDS172) ABC344 FDS456 ABC344 $1.99 6-volt Bulb, Single contact (For FDS444 & factory lights) ABC345 ABC345 $2.49 12-volt Bulb, Single contact (For FDS444 & factory lights) Steiner Light chart G

ABC344 The light components below fit FDS446, FDS448, FDS442: FDS452 ABC345 FDS452 $15.95 Plastic Tail Light Lens ABC344 $1.99 6-volt Bulb, Single contact ABC345 $2.49 12-volt Bulb, Single contact (For FDS444 & factory lights)

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 197 Emblems - Licensed by Ford Emblems - Licensed by Ford cont... NOTE: Emblems include clips / screws. Part # USD Description / Application Part # USD Description / Application FDS307 $79.99 FDS010 $21.95 Hood Emblem fits: 801, 811, 821, 841, 851, 2-pc. Hood Emblem fits: 9N, 2N (1939-47) 861, 871, 881, 901, 941, 951, 961, 971, 981 Replaces: 9N16600 (1957-62), Replaces: 311232 (Oval emblem = 3-1/4" W x 1-7/8" (Measures 5-7/8" across) USA made HRectangular emblem = 2 1/2" W x 1" H ) NOTE: Metal backed. NOTE: Painted, pot metal. FDS2475 $91.99 Hood Emblem fits the following w/ cast FDS009 $17.99 Hood Emblem (Economy) fits: 8N (1947- iron front nose: 1801, 1811, 1821, 1841, 52), Replaces: 8N16600B 1871, 1881, 4040, 4140 4-cyl. Industrial (4-5/8" W x 2" H) (1958-64), Replaces: C0NN16600E, NOTE: Economy. Painted, pot metal. C0NN16600F, 312718 (5-7/8" O.D.) USA made NOTE: Metal backed. Does FDS009B $35.99 Hood Emblem fits: 8N (1947-52) not include FDS2477 bracket. Replaces: 8N16600B FDS2477 $7.25 Hood Emblem Bracket fits the following (4-5/8" W x 2" H) NOTE: Die cast, chrome w/ red w/ cast iron front nose: 1801, 1811, 1821, 1841, 1871, 1881, 4040, 4140 4-cyl. Ford background. Beautiful! Industrial (1958-64),Inc.® Replaces: 312740

New Holland New FDS011 $48.50 (6" o/a length, 1-1/4" wide) Hood Emblem fits: Jubilee, Golden Jubilee (1953) (Measures 5-3/4" across) FDS344 $62.50 Hood Ornament fits: 4000, 4030, 4031, NOTE: Die cast, chrome plated w/ a 4040, 4110, 4120, 4121, 4130, 4131, 4140 baked-on painted finish in original (4-cyl.) (1962-64); Serviceable for 2000 colors! 4- cyl., Replaces: C3NN16B748A NOTE: Metal; chrome plated. FDS012 $48.50 FDS409 $36.95 Hood Emblem fits: NAA (1954) Parts,Hood Emblem fits: Fordson Major (Measures 5-3/4" across) (11/1952-12/64); Dexta up to SN: 916550 NOTE: Die cast, chrome plated w/ a (1957-6/63) when using oval emblem Chassis parts baked-on painted finish in original Replaces: E1ADKN8212C colors! NOTE: Metal.

FDS013 $48.50 FDS1894 $69.95 Hood Emblem fits: 600, 620, 630, 640, 650, Front Grille Emblem fits: 6000 (1961-67); 660 (1954-57) (Measures 5-3/4" across) Serviceable for 6000 Commander NOTE: Die cast, chrome plated w/ a Replaces: CONN16600A; Serviceable for baked-on painted finish in original C5NN3A515A (10 x 32 thread, 2.475" tall, colors! Tractor 3.675" length of widest point) USA made FDS014 $49.99 Hood Emblem fits: 800, 820, 840, 850, 860 ABC374 $0.49 Emblem Push Clip (For Ford emblems) (1954-57) (Measures 5-3/4" across) (0.180" center hole dia. will expand to NOTE: Die cast, chrome plated w/ a 0.300") NOTE: Push clips are included w/ baked-on painted finish in original the listed emblems. Sold individually. colors.

FDS312 $49.99 Starter hand cranks Hood Emblem fits: 900, 950, 960 (1954-57) USA made (Measures 5-3/4" across) NOTE: Die cast, IHS543 Serviceable for 9N, 2N, 8N (1939-52) Steinerchrome plated w/ a baked-on painted Replaces: 9N17040, 2N17040A finish in original colors! (13-1/4" to first bend, 5/8" dia.)

FDS235 $79.99 IHS401 Hood Emblem fits: 501, 541, 601, 611, 621,

631, 641, 651, 661, 671, 681, 701, 741, 771 Description Part # USD (1957-62), Replaces: 311231 Starter Hand Crank w/ Pin & w/ Spinner...... IHS543...... $49.99 (Measures 5-1/2" across) USA made Starter Hand Crank w/ Pin & w/out Spinner...IHS401...... $31.50 NOTE: Metal backed. NOTE: May interfere w/ some bumpers.

198 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Bumper, bolt kit Front grilles, parts cont... Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, Part # USD Description / Application 2000 4-cyl., 4000 4-cyl. (1939-64) FDS356 $309.95 Upper Grille Assembly fits: 801, 811, 821, FDS478 Replaces: 33806S34, 351505S8, FDS031 841, 851, 861, 871, 881, 901, 941, 951, 961, 354369S8 971, 981, 4030, 4031 (1958-62) Replaces: 310984 (outer shell), 310982 FDS478 (inner screen), 311591 (grille mounting Description Part # USD stud) Front Bumper (4 Bar)...... FDS031...... $139.99 NOTE: Heavy duty, painted red. Has correct fit!USA made Bumper Bolt Kit...... FDS478...... $13.95 NOTE: 5/8" x 18" x 4", Grade 8. Zinc plated.

FDS352 FDS354 FDS348 FDS190

Part # USD Description Front grilles, parts

FDS352 $156.25 Outer Grille Shell only fits: Same as New Holland Part # USD Description / Application FDS356, Replaces: 310984 Ford FDS006 $69.99 FDS354 $195.95 Inner Grille Screen only fits: Same as Front Grille fits: 9N, 2N, 8N (1941-52) FDS356, Replaces:Inc.® 310982 NOTE: Economy, Replaces: 8N8204 FDS348 $8.50 Grille Mounting Stud fits: Same as not like original. For best results fit to FDS356, Replaces: 311591, D4NN8N213A

tractor before painting. Chassis parts (5/16" - 18 UNC) NOTE: 4 used per grille; Sold individually. FDS205 $359.95 FDS190 $176.50 Bottom Grille Section fits: Same as Front Grille fits: Late 9N, 2N (Late 1941- FDS356, Replaces: 310032 USA made 47), Replaces: 9N8206D USA made NOTE: Steel; E-coated black. NOTE: Restoration quality. Made from FDS357 $139.99 original tooling. Tear drop shaped bars. Parts,

FDS198 $104.50 2-pc. Front Grille (Upper & Lower) fits: 2000, 3000, 4000, 5000 (1965-3/68) Front Grille fits: 8N (1947-52); Serviceable Replaces: C5NN8A163A, C5NN8202AA for 9N, 2N (1939-47) NOTE: Original NOTE: Metal. style. Bare steel. Round bars.

FDS1090 $199.99 FDS358 $29.99 Top Grille Section w/ Red "Ford" Letters Front Grille fits: Jubilee, NAA, 600, 800, fits: 2000, 3000, 4000, 5000, 7000 (4/1968- Early 2000 series (1953-62)Tractor 75), Replaces: C9NN8A163AG Replaces: NCA8200A NOTE: Steel; NOTE: Grey plastic. Replaces the metal primed gray. Hand crank hole is grille used April 1968 through January elongated. 1971 & the plastic grille used February 1971 & up. FDS345 $4.99 4-pc. Grille Bumper Kit fits: Jubilee, FDS359 $34.50 NAA, 501, 600, 700, 800, 900, Early 2000 series (1953-62), Replaces: NAA88227B Bottom Grille Section w/out Headlight USA made Holes fits: Same as FDS358 Replaces: D1NN8151A FDS091H $6.99 NOTE: Grey / blue plastic. SteinerGrille Mounting Stud fits: NAA, Jubilee (1953-54), Replaces: NAA88219A (1/4" - 20) NOTE: 2 used per tractor; FDS360 $6.79 Sold individually. Push-In Stud & Knob (For FDS359) fits: 2000, 3000, 4000, 5000, 5600, 6600, FDS347 $7.59 7000 (4/1968-81) Grille Mounting Stud fits: 600, 700, 800, Replaces: C9NN8B151B, 9828014 900 (1954-62), Replaces: NAA88219B NOTE: 2 used per bottom grille; (5/16" - 18) NOTE: 2 used per tractor; Sold individually. Sold individually. Front grilles, parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 199 Front grilles, parts cont... Hood, parts cont... Part # USD Description / Application Part # USD Description / Application FDS059 $62.50 1-pc. Front Grille Screen Assembly w/ FDS382 $7.79 4-pc. Hood Bolt Kit fits: 8N (1947-52) Plastic Outer Frame & Steel Screen Replaces: 355494S (3/8" x 24) USA made fits: 2600, 3600, 4100, 4600, 4600SU, 5600, NOTE: Secures hood to dash using (4) 6600, 7600 (1975-81); Will also fit 2000, bolts. 3000, 4000 if using 1-piece style grille FDS144 $39.99 housing, Replaces: D5NN8200A Battery Door w/ Latch & Hinge (18-3/8" top width, 17-1/2" bottom Assembly fits: 9N w/ steel hood, 2N, 8N width, 23-3/4" tall) (1939-52), Replaces: 9N16938C FDS4386 $5.99 NEW! Grille Mounting Screw fits: 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, FDS380 $9.99 4-pc. Rubber Bumper Kit fits: 9N w/ steel 7600; Industrials: 231, 335, 515, 531, 532 hood, 2N, 8N (1939-52) Replaces: D4NN8B151A Replaces: 11A-16758A FDS311 $4.29 Front Grille Screen Fastening Spring FDS279 $25.99 Secures bug screen to Ford grilles Battery Door Hinge fits: 9N w/ steel NOTE: 4 used; Sold individually. hood, 2N, 8N (1939-52) Ford Replaces: 9N16689Inc.® USA made New Holland New FDS008 $15.95 Chrome Battery Door Handle w/ Stud, Nosecones, parts Nut & Latch fits: 9N, 2N, 8N (1939-52) NOTE: Restoration quality. For best results fit to tractor before Replaces: 9N16625 painting. FDS007 $10.29 Part # USD Description / Application Air Cleaner Grille Door w/ Thumb Screw fits: 8N (1947-52) FDS127 $109.95 Front Hood Emblem Housing fits: NAA, Replaces: 8N9661 NOTE: Fits outside Jubilee, 600, 700, 800, 900 (1953-57) right rear hood. Will also fit Ford 9N, 2N Replaces: NCA16613A Parts, if they are converted to an 8N hood. NOTE: Restoration quality. For best FDS085 $14.95

Chassis parts results fit to tractor before painting. Air Cleaner Funnel Assembly fits: 8N FDS4018 $119.99 Front Hood Emblem Housing fits: 501, (1947-52), Replaces: 8N9684 601, 701, 801, 901 series (1957-62) Replaces: 311319 NOTE: Restoration FDS083 $83.99 quality. For best results fit to tractor (RH) before painting. FDS084 $83.99 Side Panel (Dog Leg) FDS4026 $129.99 Front Hood Top Panel fits: 2000 4-cyl., (LH) fits: 2N, 8N (1942-52) 2030, 2031, 2111, 2121, 2130, 2131, 4000 FDS083 Replaces: 8N16618A 4-cyl., 4030 4-cyl., 4031, 4120,Tractor 4121, 4130 FDS084 Replaces: 8N16619A 4-cyl., 4131 4-cyl. gas, LP, diesel (1962-64)

Replaces: C3NN16A858A FDS083 FDS084 NOTE: Restoration quality. Mounts above grille, primer finish. For best ABC2277 $3.99 Upper Side Panel (Hood Dog Leg) Bolt results fit to tractor before painting. Kit fits: 9N, 2N, 8N (1939-52) Replaces: 20311S7 (bolt), 34806S (lock), 33798S (nut) NOTE: Includes 4 fine thread bolts, nuts, lock washers. Hood, parts ABC2257 $5.99 Hood Side Panel (Hood Dog Leg) to Axle Part # USD Description / Application Support Bolt Kit fits: 9N, 2N, 8N (1939- Steiner 52) (All using single bolt dog legs) FDS069 $349.99 Hood w/ Battery Door & Hinge, Latch Replaces: 350782S8 (7/16" - 20 NF bolts) Kit, Knob (w/out Dog Legs) NOTE: Includes 2 bolts, flat & lock fits: 8N (1947-52), Replaces: 8N16612, washers, square nuts. 9N16938C NOTE: Not restoration FDS385 $7.99 6-pc. Hood Dash Screw Kit fits: NAA, quality. Does not have Ford script. Jubilee, Golden Jubilee, 501, 600, 700, 800, Will fit Ford 9N & 2N but models did 900, 2000 4-cyl., 4000 4-cyl. (1953-64) not originally have side air cleaner Replaces: 354425S (5/16" x 24 Phillips openings. For best results fit to tractor head) USA made NOTE: Secures rear of before painting. hood to dash panel using (6) screws.

200 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hood, parts cont... Hood, parts cont... Part # USD Description / Application Part # USD Description / Application FDS125 $113.95 FDS3829 $25.50 (RH) Front Hood Door Hinge fits: 501, 601, FDS130 $113.95 Front Side Panel Dog fits: NAA, Jubilee, 701, 801, 901, 1801, 2000 4-cyl., 4000 4-cyl. (LH) 600, 800 (1953-57), Early 2000 4-cyl. series series gas, diesel (1957-64) (1953-62) Replaces: 311105 FDS125 Replaces: NCA16652A FDS130 Replaces: NCA16653A FDS491 $1.05 Hood / Grille Rubber Bumper fits: 4000- TW35 (1965-90); Serviceable for 2000, FDS125 FDS130 3000, Replaces: C5NN16N655A (.990" o/a length, .500" head dia.) FDS1759 $6.79 Radiator to Hood Side Panel Bumper NOTE: 1 to 20 used per tractor; fits: NAA - 4000 4-cyl. (1953-64) Sold individually. Replaces: NAA88131B (2.026" o/a length, 1.035" thick, 1.285" wide) USA made NOTE: 2 used per Air cleaners, parts New Holland tractor; Sold individually. Must be Ford glued to panels. Part # USD Description / Application FDS075 $22.99 Air Cleaner Grille Door w/ Screen & Air Cleaner Assys.,Inc.® parts Thumb Screw fits: NAA, Jubilee, 501, 600, FDS184 $112.50 700, 800, 900, 1801, 2000, 4000 4-cyl. series Air Cleaner Assembly w/ Clip Chassis parts (1953-64), Replaces: NAA9661B (door), Assembly, Gasket & Clip-Held Cup NAA9669A (screen) fits: 8N (1947-52), Replaces: 8N9600B FDS075S $4.95 (5-5/8" c.c. bolt pattern)

Screen only (For FDS075) FDS382 $7.79 4-pc. Bolt Kit fits: 8N (1947-52) Parts,Replaces: 355494S (3/8" x 24) FDS377 $2.99 USA made NOTE: Bolts air cleaner to Center Door Rubber Bumper fits: NAA, battery tray (only 2 bolts are required). Jubilee, 501, 600, 700, 800, 900, 2000 4-cyl., FDS210 $149.99 4000 4-cyl. (1953-64), Replaces: 354177S Air Cleaner Assembly w/ Clip Assy., NOTE: 4 to 6 used per tractor; Gasket & Clip-Held Cap fits: NAA, Sold individually. Jubilee (1953-54); Also fits 600 series (1954-57) if holes are elongated to 6-7/8" FDS440 $14.95 Hood Latch Spring fits: NAA, Jubilee, (All gas), Replaces: EAE9600D, 312917 501, 600, 700, 800, 900, 2000 4-cyl., 4000 (7-1/4" c.c. bolt pattern, 15-1/2" tall) 4-cyl. series (1953-64) except LP FDS280 $139.99 Replaces: NAA16925BTractor NOTE: 2 used per Air Cleaner Assembly w/ Clip tractor; Sold individually. Assembly, Gasket & Clip-Held Cup FDS3817 $54.99 Center Panel Hood Latch Assembly fits: 700, 740, 800, 820, 840, 850, 860, 900, fits: Jubilee, NAA, 501, 600, 601, 700, 701, 940, 950, 960 (1954-57) 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 Replaces: C7NN9600J, 312918 4-cyl. gas, diesel (1953-64) (6-7/8" c.c. bolt pattern, 17-1/2" tall) Replaces: NAA16645C NOTE: 2 used per ABC422 $13.95 tractor; Sold individually. Air Cleaner Oil Bath Filter Element (3" wide x 78" long) NOTE: Replaces the FDS3821 $9.99 Center Hood Door Latch only mesh in existing air cleaners. Sold by fits: Jubilee, NAA, 501, 600, 601, 700, 701, the bag. Normal utility air cleaners will 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 Steiner use 2 bags. 4-cyl. gas, diesel (1953-64) Replaces: NAA16628C NOTE: 2 used per Clip-Held Oil Cup, parts tractor; Sold individually. FDS185 $24.75 Air Cleaner Oil Cup (Clip-Held) FDS3824 $25.50 Front & Rear Hood Door Hinge fits: Some 8N, NAA, Jubilee, 600, 700, fits: Jubilee, NAA, 600, 700, 800, 900 gas, 800, 900 (1947-57), Replaces: 8N9658 diesel (1953-57); Also fits as a rear door (5" O.D. at lip, 3-1/8" high) hinge for 501, 601, 701, 801, 901, 1801, NOTE: Check measurement before 2000 4-cyl., 4000 4-cyl. series gas, diesel ordering. (1957-64), Replaces: NAA16689C Air cleaners, parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 201 Air cleaners, parts cont... Air cleaners, parts cont... Part # USD Description / Application Part # USD Description / Application Air Cleaner Assys., parts Tubes, hoses, clamp cont... FDS186 $4.95 FDS1540 $33.50 Air Cleaner Tube fits following w/ 172 Air Cleaner Spring Clip fits: 8N, NAA, C.I. gas, LP: 801, 811, 821, 841, 851, 861, Jubilee, 600, 700, 800, 900 (1947-57) 871, 881, 901, 941, 951, 961, 971, 981, 1801 Replaces: 9N9678 - 1881, (4000 4-cyl.), 4030, 4040, 4121, 4130, 4131, 4140 (1957-64) FDS191 $7.39 Air Cleaner Gasket fits: 2N, 8N, NAA, Replaces: 311092, 86531351 (2" O.D.) Jubilee, 600, 700, 800, 900 (1942-57) FDS260 $4.59 Air Cleaner Hose fits: 9N, 2N, 8N, NAA, Replaces: 9N9623B USA made Jubilee, 501, 541, 600, 601-681, 700 - 771 (1939-62), 800, 900 series gas (1954-57) Clamp-Held Oil Cups, parts Replaces: 9N9652 (1-1/2" I.D., 2-7/16" FDS034 $15.95 Air Cleaner Oil Cup (Clamp-Style) long) NOTE: 2 required per tractor; fits: Some 9N, 2N, 501, 600, 601, 700, 701 Sold individually. (1939-64), 800, 900 gas (1954-57) FDS261 $5.59 Air Cleaner Hose fits: 801, 901 (1957-64); Replaces: 311507 (4-15/32" I.D., 4-3/4" 1801, 2000, 2600, 2610, 3000, 3600, 3610, NOTE: Check O.D. at lip, 3" high) 4000, 4600, 4610 (1962-82); Industrial

Ford measurement before ordering. 340A - 555B seriesInc.® gas, Replaces: 311107 FDS033 $10.95 (2" I.D., 2-1/4" long) NOTE: 2 required New Holland New Air Cleaner Inner Oil Cup (For FDS034) per tractor; Sold individually. Replaces: 311506 FDS4543 $12.99 NEW! Air Cleaner Hose fits: 2600, 3600, 3900, 4600, 5110, 5600, 5610, 5700, 5900, FDS081 $11.95 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710; Industrials Air Cleaner Cup Clamp (For FDS034) Replaces: D9NN9B640AA Replaces: 311508 (2-1/2" large I.D., 2" small I.D.) Parts,NOTE: See website for all applications. FDS258 $3.75 JDS540 $28.99 Clamp (Air cleaner to carb pipe)

Chassis parts Air Cleaner Oil Cup fits: 801 - 881, 901 - (For 1-3/4" to 2" O.D. hose) fits: 9N, 2N, 981, 4000 4-cyl. (1957-64) w/ 172 C.I. gas 8N, NAA, Jubilee, 501, 600, 700, some Replaces: 311510 (5-3/8" I.D., 5-3/4" 800, 900 series (1939-57) O.D.) Replaces: 9N9653 NOTE: 4 required per tractor; Sold individually. JDS541 $12.95 Air Cleaner Oil Cup Clamp fits: 801 - Miscellaneous 881, 901 - 981, 4000 4-cyl. (1957-64) w/ ABC2443 $15.99 Dust Unloader Valve (Vacuator Valve) 172 C.I. gas, Replaces: 311511 (For Dry Air Cleaners) fits: 2000, 3000, Tractor 4000 gas, diesel; 2600 - 4610 gas only Tubes, hoses, clamp (1965-82), 8000 to 7/1969, 9000 to 9/1972 FDS019 $19.99 Replaces: C5NE9C673A, 270228 (1" I.D.) Air Cleaner Tube fits: 9N, 2N, 8N (1939- ABC1765 $15.95 Dust Unloader Valve (Vacuator Valve) 52), Replaces: 9N18215C (For Dry Air Cleaners) fits: 2310 - (1-11/16" O.D.) NOTE: Chrome plated. TW20 (1972-90), Industrials using 3" unloader valve, Replaces: D2NN9C673B, F0NN9C673AA, 81870839 FDS309 $31.25 Air Cleaner Tube fits: NAA, NAB, Jubilee, 501, 541, 600, 601, 611, 620, 621, Steiner630, 631, 640, 641, 650, 651, 661, 671, 681 Worm drive hose clamps gas, LP (1953-62), Replaces: EAE9620B (1-5/8" O.D.) USA made NOTE: Premium stainless steel. FDS1481 $35.99 Sold in packs of 10.

Air Cleaner Tube fits: 700, 740, 800, 820, Part # USD Specifications 840, 850, 860, 900, 950, 960 gas (1954-57) ABC4133 $6.99 (5/16" - 5/8" range, 5/16" band width) Replaces: EAF9621B, 311112 (1-5/8" O.D. pipe) ABC4142 $7.59 (3/8" - 7/8" range, 5/16" band width) ABC4147 $7.99 (7/16" - 1" range, 5/16" band width)

202 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Worm drive hose clamps USA made cont... Pre-cleaner caps, parts cont... Part # USD Specifications Part # USD Description / Application ABC4151 $9.59 (1/2" - 1-1/16" range, 1/2" band width) ABC554 $49.99 Pre-Cleaner Cover w/ Brass Knurled Nut ABC4155 $9.59 (1/2" - 1-1/4" range, 1/2" band width) fits: Some 501, 601, 701, 801, 901, 1801, 2000, 3000, 4000 series gas, diesel, 4400, ABC4158 $9.99 (11/16" - 1-1/2" range, 1/2" band width) 5000 gas (1957-75) w/ 5-7/16" I.D. & ABC4161 $10.95 (3/4" - 1-3/4" range, 1/2" band width) 5-1/2" bowl, Replaces: B9NN9A660A, ABC4165 $10.99 (1" - 2" range, 1/2" band width) B9NN9A664A, 73223 USA made NOTE: Aluminum. ABC4180 $13.99 (1" - 3" range, 1/2" band width) ABC484 $24.95 Pre-Cleaner Bowl fits: 501, 601, 701, 801, ABC4169 $10.99 (1-1/4" - 2-1/4" range, 1/2" band width) 901, 1801, 2000, 3000, 3400, 4000, 4400 gas, ABC4172 $11.99 (1-1/2" - 2-1/2" range, 1/2" band width) diesel, 5000 gas (1957-75) w/ 5-1/2" dia. ABC4176 $11.99 (1-3/4" - 2-3/4" range, 1/2" band width) Replaces: B9NN9A663A NOTE: Check ABC4184 $13.99 (2-1/4" - 3-1/4" range, 1/2" band width) measurements before ordering. Clear plastic. ABC4188 $14.99 (2-1/2" - 3-1/2" range, 1/2" band width)

ABC484 dimensions: Bowl O.D. at top = 5-1/2"; Bowl O.D. at New Holland ABC4204 $17.95 (2-1/2" - 4-1/2" range, 1/2" band width) bottom = 5"; Cone I.D. at top=2-7/16"; bowl side height=2-7/16"; ABC4192 $15.99 (2-3/4" - 3-3/4" range, 1/2" band width) overall height=3-9/16" Ford ABC4196 $15.99 (3" - 4" range, 1/2" band width) ABC383 $84.99 Inc.® ABC4200 $15.99 (3-1/4" - 4-1/4" range, 1/2" band width) Pre-Cleaner Cap Assembly fits: Ford ABC4206 $99.99 (130-pc. assortment; Display rack: models (All w/ 2-1/4" I.D. base & 7" Chassis parts 5/16" - 2-3/4" range) NOTE: Includes bowl), Replaces: 86620243 20 each: ABC4133, ABC4142, ABC4155, ABC4161, ABC4169, ABC4176 & 10 each: ABC512 $77.99 ABC4151. Pre-Cleaner Cap Assembly fits: Ford models (All w/ 2-1/2" I.D. base & 7" bowl) USA made Pre-cleaner caps, parts Parts, Part # USD Description / Application ABC470 $42.50 IHS390 $36.99 Air Cleaner Cap fits: 9N, 2N (1939-47) Pre-Cleaner Cap Assembly fits: Ford w/ vertical air intake through hood models (All w/ 3" I.D. base & 7" bowl) (4-1/4" body dia.; 1-3/4" I.D.) NOTE: Fits outside of pipe. JDS559 $25.99 Pre-Cleaner Cover w/ Brass Nut FDS361 $21.95 Pre-Cleaner Cap fits the following gas w/ fits: Some 2610 - 6810 (1982-93) w/ 7" dia. dry type air cleaner: Some 2000, 3000, 4000 bowl, Replaces: 73534 series, 2600, 3600, 4600, 231, 335, 515, 531, NOTE: Powder coat green. 532, 3400, 4400, 4500Tractor (1965-82); Fits the following diesels w/ oil bath application: ABC338 $13.99 Pre-Cleaner Bowl (For 2" to 3" inlet) Some 2000, 3000, 4000 series, 231, 233 w/ fits: Some 2610 - 6810 (1982-93) 2" Intake (1965-78); Dexta, Super Dexta Replaces: C0NN9A663A, 80073533, 73533, (1957-64), Replaces: C5NN9A660B Can replace Donaldson bowl P020227 (6-1/2" o/a height) NOTE: 2" intake, NOTE: Clear plastic. Metal; powder coat black. Check intake ABC338 dimensions: Bowl O.D. at top - 7"; Cone I.D. at top - pipe size before ordering. 3-1/2"; Bowl side height - 3"; Overall height - 4-1/8" FDS362 $21.95 Pre-Cleaner Cap fits: Some 4000, 4400, ABC510 $66.99 4500, 4600, 5000, 5100, 5200, 7000, 7100, Pre-Cleaner Cap Assembly fits: Ford Steiner7200, Industrials; 340-535 (1965-88) w/ models (All w/ 4" I.D. base & 10-1/2" 2-1/4" Intake, Replaces: C5NN9A660A, bowl) 81806312 (6-3/4" o/a height) NOTE: 2-1/4" intake, Metal; powder coat black. ABC339 $16.99 Pre-Cleaner Bowl (For 3" to 4" inlet) ABC1824 $61.50 fits: Some 2600 - TW20 (1975-83) Pre-Cleaner Cap Assembly fits: Some 801 Replaces: C9NN9A663A, 594075, Can - 1881 series, 2000 - 6000 series (1957-75) replace Donaldson bowl P016330 w/ 2" I.D. base & 5-1/2" bowl NOTE: Clear plastic. Replaces: B9NN9A660A, 86555327 ABC339 dimensions: Bowl O.D. at top - 10-1/2"; Cone I.D. at top - USA made 5-9/16"; Bowl side height - 3"; Overall height - 4"

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 203 Fuel tanks, parts Fuel caps, parts Part # USD Description / Application Part # USD Description / Application FDS176 $175.00 FDS167 $9.95 Fuel Cap (Non-Vented) w/ Gasket Fuel Tank fits: 9N, 2N, 8N (1939-52) fits: 9N, 2N, 8N (1939-52) Replaces: 9N9002 NOTE: Steel. Replaces: 9N9030 NOTE: Original style.

FDS178 $199.99 Fuel Tank fits: NAA, Jubilee, 600, 601, ABC003 $9.95 700, 701, 800, 801, 900, 901, 2000 4-cyl., (Chrome) 4000 4-cyl. series gas (1953-64) Replaces: NAA9002E, NCB9002A NOTE: Steel. Includes provision for fuel sending units. Depending on Fuel Cap (Vented) w/ Gasket application, tank may be smaller Underside view Fits: 9N - TW35 (1939-90) capacity than original. If fuel sender is Replaces: C5NN9030B, E7NN9030AA MHS043 $9.95 needed please order FDS200. (2-7/8" O.D.) (Zinc) NOTE: Zinc finish can be painted. MIS129 $69.99 Fuel Tank Liner Kit USA made NOTE: Seals tanks up to 12 gallons. Includes all of the products necessary to Ford successfully clean, prep and line your Underside view Inc.®

New Holland New tank. Once lined, pinhole leaks will be sealed & future rust will be prevented. MHS043GK $1.50 Gasket only (For ABC003, MHS043) Fuel tank liner kit ships in own box. 1 USA made kit per box. Can not be sold in the states of CA, HI, AK. For CA residents we can special order a low V.O.C. acetone Sediment bowl assemblies, parts formula. Part # USD Description / Application MIS106 $32.50 ABC038Parts, $20.75 Fuel Tank Liner only (1 quart can) USA made Chassis parts Sediment Bowl Assembly fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) ABC127 $34.95 Fuel Shut Off Valve w/ O-Ring at Fuel Replaces: 2N9155B, NAA9155B Tank fits: 501, 600, 601, 700, 701, 2000 (3/8" pipe inlet, 1/4" tube outlet) 4-cyl. gas, diesel (1954-64); 800, 801, 900, 901 up to SN: 126524 w/ 1/4" fuel line gas, diesel (1954-60); 1801, 4000 both 4-cyl. diesel (1958-64), Replaces: 311292 FDS4395 $44.99 NEW! Fuel Shut Off ValveTractor w/ O-Ring fits: 801, 901 both SN: 126565 & up, 2000 4-cyl., 4000 4-cyl. (1960-64) Replaces: C0NN9285A ABC123 ABC039 ABC3765/ABC319 ABC563 NOTE: Tank mounted. ABC038 components FDS483 $15.95 Fuel Shut Off Valve fits: 2000 3-cyl. - 7810; Industrials: 3400 - 755B (1965- The following parts (Sold separately) will fit ABC038 Sediment 96) gas, diesel; Dexta, Major, Supers Bowl Assy: (1952-64), Replaces: E2NN9N200A, Part # USD Description E2NN9N024AA, E0NN9N024AA, ABC123 $2.99 Glass Bowl, Replaces: 9N9162 Steiner83935915 (1/2" pipe inlet, 5/16" tube (1.280" L, 2" O.D.) outlet) NOTE: Metal w/ brass valve & ABC039 $1.95 Cork Gasket, Replaces: NAA9160A plastic filter screen. (2" O.D.) USA made ABC1315 $8.95 Fuel Tank Screen fits: Most Ford models ABC3765 $1.35 w/ stem style sediment bowl (1 piece) Screen (Square hole screen) (.375" screen O.D., .216" pipe O.D., 2.530" Replaces: 2N9161 (1-3/4" O.D.) ABC319 $6.50 o/a length) USA made NOTE: Slides on NOTE: Sold individually. top of sediment bowl inlet to prevent (Set of 5) dirt from the fuel tank bottom from ABC563 $4.95 Bail Assembly w/ Nut, Replaces: 2N9166 entering the sediment bowl assembly. (2.700" length) USA made

204 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Sediment bowl assemblies, parts cont... ABC040 / ABC106 / FDS3363 components cont... Part # USD Description / Application The following parts (Sold separately) will fit ABC040, ABC106, FDS3363 Sediment Bowl Assys: ABC040 $29.95 Sediment Bowl Assembly w/ 3/8" Bolt Part # USD Description Hole fits: 600 - 660, 700, 740, 800 - 860, 900 3/8" - 960 (1954-57) (All gas to SN: 126524); 501, FDS1785 $1.79 Fuel Filter Valve Stem to Carb Body Gasket 541, 601 - 681, 701, 741, 2000 4-cyl. (1957-64) (For ABC106, FDS2620, FDS3363) Replaces: NCA9155D (3/8" bolt hole, Replaces: NCA99180A 1/4" fuel line thread) NOTE: Use caution (0.443" I.D. x 0.600" O.D. x 0.047" thick) when threading in the fuel line. Filter is NOTE: 2 used per tractor; not returnable if threads have been cross Sold individually. threaded. FDS2616 $16.50 Sediment Bowl Retaining Bolt (For ABC040), Replaces: 86531362 ABC106 $29.95 (3/8") USA made Sediment Bowl Assembly w/ 7/16" Bolt FDS2620 $24.50 Sediment Bowl Retaining Bolt 7/16" Hole fits: 800, 801, 900, 901, 1801 (1958-60) (For ABC106, FDS1785, FDS3363) (All gas SN: 126525 & up), Replaces: 311272 Replaces: C0NN9A349B New Holland (1/4" fuel line thread) NOTE: Use caution (7/16") USA made when threading in the fuel line. Filter is Ford not returnable if threads have been cross threaded. Inc.®

FDS3363 $29.95 Sediment Bowl Assembly fits: Some Late Fits: 2000 3-cyl., 2600, 2610, 3000, 3600, Chassis parts 801, 901, 1801, 4000 4-cyl. series gas SN: 3610, 4000 3-cyl., 4600, 4610, 5000, 6600, 126525 & up (1960-64); 6000 series gas 230A - 5500 (1965-82) gas using 7/16" mounting bolt & 5/16" fuel Replaces: 500621, C5NE9155D, line thread, Replaces: C0NN9155A C5NE9165D, D4NN9155A (7/16" bolt hole, 5/16" fuel line thread) NOTE: Use caution when threading in the Parts,FDS3458 ABC4280 fuel line. Filter is not returnable if threads have been cross threaded. Description Part # USD Sediment Bowl Assembly...... FDS3458...... $38.50 NOTE: See website for full applications. Gasket only (For FDS3458)...... ABC4280...... $1.95

ABC294 ABC346 FDS3280 FDS1780

Fuel filters TractorPart # USD Description / Application FDS1785 FDS2616 FDS2620 ABC490 $6.50 In Line Fuel Filter w/ Hose & Clamps ABC040 / ABC106 / FDS3363 components fits: Ford models using a 3/8" fuel line The following parts (Sold separately) will fit ABC040, ABC106, NOTE: Must splice fuel line to use. FDS3363 Sediment Bowl Assys (Continues in next column): Will help to keep rust & dirt out of Part # USD Description carburetor. ABC294 $1.49 Gasket, Replaces: 311275 (1-9/16" O.D.) USA made NOTE: 1954-64. ABC4646 $36.99 ABC346Steiner $4.65 Filter Screen & Gasket Set NEW! Dual Stage Fuel Filter Assembly FDS3280 $7.95 Sediment Bowl fits: 501 - 4000 4-cyl. fits the following diesel 1965 & up: 2000 (1954-64), Replaces: 311276 3-cyl., 2610, 2810, 2910, 3000, 3610, 3910, (1.500" O.D., 1.900" length) NOTE: Glass. 4000 3-cyl., 4110, 4600, 4610, 5110, 5610, Measure dia. before ordering. 6410, 6610, 6710, 6810, 7610, 7710, 7810, FDS1780 $1.59 Fuel Filter Valve Stem to Carb Body Gasket 7910, 8210, Replaces: EBPN9N166AA (For ABC040), Replaces: NCA99180B NOTE: CAV style fuel filter. Fuel lines (0.389" I.D. x 0.579" O.D. x 0.062" thick) come in from the sided NOT the top. NOTE: 2 used per tractor; Sold individually. Fuel filters continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 205 Fuel filters cont... Fuel lines, part cont... Part # USD Description / Application Part # USD Description / Application ABC1423 $29.95 Diesel Single Fuel Filter Assembly FDS1546 $44.95 w/ Glass Bowl fits: 2000 3-cyl. - 7700; Fuel Line fits: 800, 820, 840, 850, 860, 900, Industrials: 230A - 755A (1965-88) 950, 960 (All w/ 172" gas engine) Replaces: C5NE9165C, C7NN9162B, (1954-57), Replaces: NCA9282D, D9NN9165BA, 83937061 ((4) 1/2" x 20 86593249 (1/4" tube) USA made UNF ports) NOTE: If glass bowl is needed order ABC3895. Use caution when threading fuel line in, as it is not FDS1549 $49.95 Fuel Line fits: Some 801, 811, 821, 841, returnable if threads have been cross 851, 861, 871, 881, 901, 941, 951, 961, 971, threaded. 981, 1801, 1811, 1821, 1841, 1871, 1881 ABC1421 $5.95 Diesel Fuel Filter Element w/ Seals (All w/ SN: 11977 - 126524 & 172 C.I. gas (For Cav/Simms diesel fuel filters) engine) (1958-60), Replaces: 310918 fits: 2000 3-cyl. - 9600 (1965-88) (1/4" tube, 15-1/2" long) USA made (All w/ 2.85" tall element) FDS1551 $149.95 Replaces: 83937061, D8NN9N074AA, Fuel Line fits: 801, 811, 821, 841, 851, Cav 7111/296 (3-1/2" O.D. x 3/4" I.D. x 861, 871, 881, 901, 941, 951, 961, 971, 981 2.85" tall) NOTE: Sold individually. (All w/ SN: 126525 & up & 172" gas Ford ABC3882 $4.50 Fuel Filter Bowl fits the following diesels engine) (1960-64),Inc.® Replaces: 86580561,

New Holland New w/ original CAV filters: 2310 - 8210, C0NN9289E (5/16" tube) USA made 2600 - 7600, 3230 - 8830, (4100 1975-81), (4110 3-cyl. 1981-2/90), TW5 - TW35; Industrial: 230A -755B, A64, A66 Replaces: 505874, D8NN9162BA Throttle parts (1" I.D. center hole, 2" tall, 3.300" O.D. Part # USD Description / Application bowl, 3.689" O.D. gasket mounting flange, flat bottom w/ squared edge) FDS378 $32.95 NOTE: Glass. Measure before ordering Parts,Quadrant Throttle Plate fits: 9N, 2N as more than one size & style was used. (1939-47), Replaces: 9N9820

Chassis parts Gasket not included.

FDS151 $11.95 Quadrant Throttle Plate fits: 8N (1947-52) Fuel lines, part Replaces: 8N9889A

Part # USD Description / Application FDS411 $2.95 FDS485 $15.99 3-pc. Screw Kit (For Quadrant Throttle Fuel Line Assembly fits: 9N, 2N, 8N Plate) fits: 8N (1947-52) (1939-52), Replaces: 9N9282A Replaces: 28319S7 (10-24 x 3/8") (1/4" tube w/ 7/16-24 fitting)Tractor USA made USA made FDS413 $46.99

FDS1603 $4.95 Lever (For Throttle) fits: 8N (1947-52) Rubber Bumper Anti-Rattler fits: 9N, Replaces: 8N9805 2N, 8N (1939-52), Replaces: 9N9121A, 9N9121 (0.985" O.D., 0.500" tall) FDS1610 $14.95 NOTE: Fits between fuel line & tank. Throttle Bellcrank Friction Disc Spring Washer fits: NAA, 501, 600, 700, 800, 900, FDS487 $29.95 2000, 4000 4-cyl. gas, LP (1953-64) SteinerFuel Line Assembly fits: NAA, Jubilee Replaces: NAA99778B (1953-54), Replaces: NCA9282C FDS073 $3.50 Throttle Friction Disc fits: Jubilee, NAA, (1/4" fuel line) 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, FDS1544 $23.95 4600, 4610, 5000, 5600, 5610, 6600, 6610, Fuel Line fits: 600 series, 601 series, 700, 7700, 7710, 7910 (1939-91); Industrials: 740, (2000 4-cyl.), 2111, 2030, 2031, 2120, 234 - 545D, 3400 - 4500, Replaces: 9N518, 2130, 2131 gas (1954-64) (All w/ 134 C.I. 83924272 (3" O.D., 1/2" center hole) engine), Replaces: NCA9282B USA made NOTE: See website for all (1/4" tube) applications.

206 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Throttle parts cont... Clutch kits, parts cont... Part # USD Description / Application Part # USD Description / Application FDS332 $2.99 Clutch kits, parts cont... Throttle Rod Grommet fits: NAA, Jubilee, FDS1133 $499.99 Dual Clutch Kit fits: Dexta, Super Dexta, 501, 600, 700, 800, 900; 2000, 3000, 4000, 660, 661, 860, 861, 960, 961, 2000 4-cyl., 5000 - 7910 (1953-91), Replaces: 353873S 4000 4-cyl. series (1955-64) (All w/ 5 FDS155 $14.95 Throttle Control Linkage fits: 9N, 2N speed transmission live PTO) (1939-47), Replaces: 9N9810 (2-1/2") Replaces: 311435 (9" dia. dual clutch, NOTE: Mounts behind dash. 1-7/8" x 29 PTO spline & 1" x 15 transmission spline) NOTE: Kit includes FDS265 $21.50 Throttle Control Linkage (Governor to new dual clutch assembly (no core throttle control shaft) fits: 9N, 2N needed), pilot bearing, throw out (1939-47), Replaces: 9N9815, 9N9815B bearing. (10-1/4") NOTE: Vertical control linkage. Clutch Alignment Tools FDS156 $18.99 NOTE: Please verify spline counts prior to ordering. Throttle Control Linkage (Governor to ABC412 $6.99 Clutch Alignment Tool fits: 9N, 2N, 8N, New Holland carburetor) fits: 9N, 2N, 8N (1939-52)

NAA, Jubilee, Some 600, 700, 800, 900 Ford Replaces: 9N9818A (7") (1939-57) (1-3/8" dia. spline, 10 splines, FDS158 $27.95 .675" pilot dia.)Inc.® USA made NOTE: Check Throttle Control Linkage (Throttle to clutch spline dia. before ordering. governor control) fits: 8N (1947-52) FDS4397 $11.99 Replaces: 8N9815 (23-3/8") NEW! Clutch Alignment Tool fits: 2000 Chassis parts (1965-74), 2610, 2810, 3055, 3430, 4100, FDS451 $22.50 Throttle Control Rod fits: NAA - 4000 4600; Industrials (1-7/8" 29 splines, 4-cyl. gas (1953-64), Replaces: NAA9815F 1" 10 splines, 0.670 pilot) USA made (4-1/8" o/a length) FDS4388 $11.99 FDS2007 $15.95 Throttle Control Rod (Governor to NEW! Clutch Alignment Tool fits: 2310, Carburetor) fits: Jubilee - 4000 4-cyl. series Parts,2600, 2810, 2910, 3610, 3910, 4000, 4610; (1953-64) gas, LP, Replaces: EAF9818C, Industrials (1-7/8" 29 splines, 1" 15 86552618 (10-1/2" length) splines, 0.670 pilot) USA made NOTE: Clevis is not included. NOTE: See website for all applications. FDS4400 $11.99 NEW! Clutch Alignment Tool fits: 2600, 2610, 2810, 3600, 4600, 5600, Clutch kits, parts 7600; Industrials (1-5/8" 25 splines, Part # USD Description / Application 1-1/8" 21 splines, 0.670" pilot) USA made Clutch kits, parts NOTE: See website for all applications. FDS259 $149.99 Clutch Kit fits: 9N, 2N, 8N, NAA, Jubilee, FDS4403 $11.99 NEW! Clutch Alignment Tool fits: 5000, 600, 700, 800, 900 (1939-57)Tractor (All w/ 3 5600, 6410, 6700, 7000, 7200, 8000, 9000, or 4 speed) (9", 10 splines) NOTE: Kit TW20, TW30; Industrials includes new pressure plate, clutch (1-3/4" 10 spline, 1.400" pilot) USA made disc, throw out bearing, pilot bearing, NOTE: See website for all applications. alignment tool. Does not include pilot Clutch Throw-Out Bearings bushing for NAA, Jubilee. ABC496 $19.95 Clutch Throw-Out Bearing fits the FDS087 $29.95 Clutch Disc fits: 9N, 2N, 8N, 600, 700, 800, following w/ 4 speed single clutch: 9N, 900 up to SN: 14257 (1939-57) 2N, 8N, Dexta, Major, NAA, Jubilee, 541, Replaces: 91A7550, NAA7550A 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 (9", 10 splines, spring loaded, 4-cyl. series (1939-64); Fits the following Steiner1-3/8" spline I.D.) 1965-84 w/ 11" single clutch: 2000 3-cyl., FDS415 $195.95 Clutch Kit fits the following w/ 10" 15 2600, 2610, 3000, 3400, 3500, 3550, 3600, spline single clutch: 501, 601, 701, 901, 3610, 231, 233; Fits the following made 2000 4-cyl., 4000 4-cyl. series (1958-64) 10/1969 - 9/1971 w/ 11" 3 lever pressure Replaces: NDA7550B, NDA7563 plate & w/out PTO: 4000 3-cyl., 4110, (10", 15 spline, 1" dia. spline) 4400, 4500, Replaces: C0NN7580A, NOTE: Kit includes new pressure plate, 787580A8 (2.078" I.D., 0.801" thick, clutch disc, throw out bearing, pilot 3.269" face dia.) NOTE: Measure before bearing, alignment tool. Verify spline ordering. count. Clutch kits, parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 207 Clutch kits, parts cont... Transmission parts Part # USD Description / Application Part # USD Description / Application Clutch Throw-Out Bearings cont... FDS032 $139.99 ABC2501 $22.95 Clutch Throw-Out Bearing fits the Countershaft fits: 9N, 2N (1939-47) following w/ dual clutch: 660 - 961, w/ 3 speed transmission Dexta; Fits the following w/ single or Replaces: 9N7111 dual clutch: 2000, 3000, 4000, 5000 - TW5 (1955-93), Replaces: 86534551, 82010859 FDS3304 $134.25 (2.490" I.D., 4.060" O.D., 0.870" wide) Countershaft fits: 8N (1947-52) NOTE: Sealed bearing, no need to w/ 4 speed transmission grease. See website for full applications. Replaces: 8N7111 (11.887" o/a length) FDS1265 $59.99 Clutch Throw-Out Bearing Carrier fits the following w/ double clutch & 5 FDS016 $178.50 speed transmission SN: 14256 & up: 661, Countershaft fits: NAA, Jubilee, 861, 961, 2000, 4000 4-cyl. series (1958- Golden Jubilee (1953-54) 64) (All w/ live PTO), Replaces: 311260, Replaces: NAA7111C 86539876 (2.110" I.D.) (12-1/2" total length) FDS1268 $125.00 Input Shaft Retainer fits the following w/ double clutch & 5 speed transmission SN: FDS017 $178.50 Countershaft fits: 501, 600, 700, 800, Ford 14256 & up: 661, 861, 961, 2000, 4000 4-cyl 900, 1801, 2000,Inc.® 3000, 4000, 4500

New Holland New series (1958-64) (All w/ live PTO) series (1954-75) (All w/ 4 speed Replaces: 311261 (2.105" tube O.D., transmission), Replaces: NDA7111C 5.120" o/a length) (13" total length) Clutch Pilot Bearings FDS328 $9.95 Transmission Drain Plug w/ Gasket ABC3149 $4.99 Clutch Pilot Bearing fits: Dexta, 9N, fits: 9N, 2N, 8N, NAA, Jubilee; Also 2N, 8N, 541 - 4000 4-cyl., 2000 3-cyl. - fits as an Oil Fill Plug on 8N when 5000 (1939-98), Replaces: C5NN7600A, using later model shift cover, NAA - 81805417 (0.669" I.D., 1.575" O.D., 0.472" 4000 4-cyl., 4 speed (1939-64) NOTE: See website for full Parts, wide) Replaces: 9N7010 applications. (2-1/2" O.D., 2"-12 UN thread)

Chassis parts FDS4393 $11.99 NEW! Clutch Pilot Bearing fits: TS100, ABC291 $1.29 Pump Base Drain Plug / Transmission TS110, TS90, TW10, TW15, TW20, TW25, Filler Plug Gasket (For FDS328) TW30, TW35, TW5, 5000, 5110, 5190, USA made 5340, 5600, 5610, 5610S, 5640, 5700, 5900, FDS1558 $15.99 6410, 6600, 6610, 6610S, 6640, 6700, 6710, Transmission Filler Cap w/ Gasket 6810, 6810S, 7000, 7010, 7410, 7600, 7610, fits: 8N (1948-52) using original shifter 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, cover w/ tang style filler cap 7910, 8000, 8010, 8210, 8240, 8340, 8400, Replaces: 8N7485 (cap), 8N7037B 8530, 8600, 8630, 8700, 8730, 8830, 9000, Underside view (gasket) 9200, 9600, 9700, Replaces:Tractor 83992560, F0NNN779AA (2.68" O.D., 1.43" I.D., FDS418 $11.99 Transmission & Rear End Oil Filler 0.59" width) Plug fits: Some Dexta, Super Dexta, Clutch Bushing Fordson Power Major, Fordson Super FDS4686 $7.99 NEW! Clutch Pedal Bushing fits: 2000, Major; All 2000 3-cyl., 2600, 3000, 3400, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3500, 3600, 4000 3-cyl., 4000SU, 4400, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 4500 4600, 4600SU (1957-81) 5000, 5600, 5610, 5900, 6600, 6610, Replaces: 957E7010 (1-5/8" x 12 7000, 7100, 7600, 7610, 7630, 8010, 8030; thread) NOTE: Check thread dia. Industrials, Replaces: C5NN7A578A before ordering. Use ABC039 gasket Steiner(1.120" I.D., 1.250" O.D., 0.750" wide) sold separately. NOTE: See website for all applications. ABC387 $8.99 Clutch Spring Transmission Input Shaft Seal fits: 9N, ABC1895 $7.99 Clutch Release Bearing Spring fits the 2N, 8N, NAA, Jubilee, 501, 600, 700, following w/ 3 or 4 speed transmission: 800, 900, 1801, 2000, 3000, 3400, 3500, 9N, 2N, 8N, NAA, Golden Jubilee, 501, 4000, 4400, 4500 series (1939-75) 600, 700, 800, 900, (2000 4-cyl. series), (All w/ 3 or 4 speed transmission) (4000 4-cyl. series) (1939-64) Replaces: 8N7052A Replaces: 9N7562 NOTE: 2 used per (1.375" I.D., 2.000" O.D., 0.337" wide) tractor; Sold individually.

208 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Transmission parts cont... Transmission parts cont... Part # USD Description / Application Part # USD Description / Application ABC4222 $53.99 Transmission Main Shaft Front Bearing FDS1892 $10.95 Gear Shift Lever Spring fits fits: 2N, 8N, 9N, NAA, 501, 600, 601, the following w/ 3 or 4 speed 700, 701, 800, 801, 900, 901, 2000, 3000, transmission: 9N, 2N, 8N, NAA, 501, 4000 4-cyl.; Industrial: 340 - 550, 3400, 600, 700, 800, 900, 2000, 3000, 4000; 3500, 4400, 4500 (1939-75) (All w/ 3 or Industrials: 340 - 4500 w/ 4 speed 4 speed transmission or 4 speed torque torque converter transmission (1939- converter transmission) 75), Replaces: 9N7227B Replaces: 9N7120, 81804773 (.875" I.D.) (2.250" tall, 1.768" tapers to 1.003" USA made NOTE: See website for all O.D., 0.125" wire dia.) USA made applications. FDS253 $5.49 Gear Shift Pin fits: 9N, 2N, 8N, NAA, FDS3971 $32.95 Transmission Seal & Gasket Kit Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, fits: 2N, 8N, 9N (1939-52) 4500 series (1939-75) w/ 3 & 4 speed Replaces: D5NN7223A, 8N7011, transmission, Replaces: 9N7221B 8N7052A, 9N4662, 9N7086, 9N7223 New Holland NOTE: Also fits Golden Jubilee, DEC451 $9.75 Transmission Shift Pattern Decal

Jubilee, NAA except as a fits: 2000, 3000, 4000 series (1965-85); Ford transmission to rear end gasket Industrials: 230A - 540A w/ 8 speed which is available by also ordering transmissionInc.® & Live PTO FDS3979 gasket. Replaces: C5NN7B292, D3NN7B292B (3-15/16" x 5-1/4") USA made FDS3357 $149.95 Transmission Seal, Bearing & Gasket Chassis parts FDS2479 $99.95 Transmission Shift Cover Assembly Kit fits: 2N, 8N, 9N (1939-52) fits the following w/ internal safety Replaces: (2) 9N7086, (1) 8N7052A, (1) switch & 6, 7, 8 speed transmission: 9N7120, (4) 9N7066, (4) 9N7067, (1) 2000, 3000, 4000, 5000 series (10/1966- 9N4662, (1) 9N7223, (1) 8N7223 74), Replaces: 81814737 (Main lever is NOTE: Also fits NAA & Jubilee with 13-1/4" tall from cover up) purchase of FDS3979 gasket. Parts,NOTE: Stamped steel. Includes FDS4680 $7.99 brass fill plug, (2) shift levers, knobs, NEW! Transmission Gear Shift Cover boots. Has provision for dipstick, Gasket fits: 2N, 9N, Replaces: 9N7223B dipstick not included. See website USA made for complete applications listing. FDS2479GK $5.75 Transmission Shift Cover Gasket only ABC288 $3.95 Transmission Gear Shift Cover Plate (For FDS2479) Gasket fits: 8N, NAA, Jubilee, 541, 600, FDS4353 $3.99 601, 700, 701, 800, 801, 900, 901, 1801, NEW! Gear Shift Boot fits: Same as 2000, 3000, 3400, 3500, 4000, 4400, 4500 FDS2479, Replaces: C5NN27534 series w/ 4 speed transmission (1947- NOTE: Sold individually. 75), Replaces: D5NN7223ATractor USA made ABC2639 $64.95 Sherman Transmission Shift Cable w/ FDS3998 $34.50 12-pc. Transmission Seal & Gasket Kit Knob fits: 9N, 2N, 8N (1939-52) using fits: 600, 601, 700, 701, 800, 801, 900, Sherman cable shifted transmission, 901, 2000 4-cyl., 4000 4-cyl. (1954-64) step up / step down, Replaces: 10B195 (All w/ 4 speed transmission) (3/8" - 24 NF inner ends & 1/2" - 20 NF NOTE: See website for replacement outer end thread; 31-1/2" o/a length) numbers. FDS1451 $51.99 Transmission Main Shift Lever FDS3996 $6.99 Transmission Gear Shift Cover Plate (For 1, 2 & 3rd speed gears) fits: Dexta, Gasket fits: 600, 650, 651, 660, 661, 800, Super Dexta (1957-64) 850, 851, 860, 861, 900, 950, 951, 960, Replaces: 81717916, 957E7210C 961, 2000 4-cyl., 4000 4-cyl. (1954-64) Steiner (11.89" long, 5/16" - 24 N.F. thread (All w/ 5 speed transmission) pitch) Replaces: NDA7223A FDS410 $79.95 FDS3921 $154.95 Transmission Shift Cover Assy. Gear Shift Lever w/ Knob fits: 8N, w/ Levers fits: Dexta, Super Dexta NAA, Jubilee, 501, 600, 700, 701, 800, (1957-64), Replaces: 957E7210C, 900, 1801, 2000, 3000, 3400, 3500, 4000, E439GB9 (levers), 957E7222 (cover 4400, 4500 (1947-75) (All w/ 4 speed plate) (5/16" - 24" knob thread) transmission), Replaces: C5NN7202B NOTE: Double lever w/ knobs. (5/16" UNF) Transmission parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 209 Transmission parts cont... Steering wheels, parts Part # USD Description / Application Steering wheels are just like original • All new material Steel spokes FDS1447 $32.99 Transmission Shifter Plate Part # USD Description / Application fits: Dexta, Super Dexta (1957-64) FDS143 $72.99 Replaces: 957E7222 Steering Wheel fits: 9N (1939-40); Ford 1-1/2 ton trucks (1941-46) ABC085 $4.75 Gear Shift Lever Knob fits: All Ford Replaces: 9N3600B models (1947-88) (All w/ 4 & 5 speed (18" dia., keyed hub, 11/16" - 13/16" transmission models & original shift tapered shaft, 4 covered to center spokes) lever), Replaces: BB7213A NOTE: Includes chrome plated steel cap. (1.985" dia., 3/8"-24 NF) ABC502 $2.99 Steering Wheel Nut (For FDS143) NOTE: Bakelite. FDS308 $51.99 ABC221 $4.95 Gear Shift Lever Knob (Ball-Type) Steering Wheel fits: 9N, 2N (1939-47) fits: Dexta (1957-64), 2000, 3000, 4000, (17-5/8" dia., keyed tapered hub, 5000, 7000 (1965-74); 231, 233, 335, 11/16" - 13/16" shaft, 3 covered to center 420, 515, 532, 535, 2600, 3600, 4100, spokes w/ ribbed outer hand grip) 4600, 5600, 7600 (1975-81); 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, FDS112 $46.50 5900, 6610, 7610 (1981-91) 3230, 3430,

Ford Steering Wheel fits: 9N, 2N (1939-47) 3930, 4130, 4630 (3/1990-91), Replaces: Replaces: 2N3600 Inc.® New Holland New C5NN7213A (1.640" dia. 3/8"-24 NF) (17-5/8" dia., keyed tapered hub, USA made NOTE: Bakelite. 11/16" - 13/16" shaft, 3 bare spokes) FDS088 $3.95 Gear Shift Boot fits: All Ford models (1939-88) w/ 3 & 4 speed transmission FDS197 $7.95 Steering Wheel Nut (For FDS112, FDS195) Replaces: C5NN7277C, 8N7277, NOTE: Chrome. C0NN7277 ABC1591 $6.59 Dome Nut Washer (For FDS112, FDS195) NOTE: Clear zinc plating. FDS111Parts, $46.50 Steering Wheel fits: 8N, NAA, Jubilee, 501, Select-O-Speed transmission parts 600, 700, 800, 900, 2000, 4000 4-cyl. series (1947-64); Serviceable for 1801 Chassis parts Part # USD Description / Application Replaces: 8N3600 (17-5/8" dia., 3/4" shaft, FDS1229 $48.95 Select-o-Speed Control Selector Lever 36 splined hub, 3 bare spokes) fits the following w/ Select-o-Speed FDS189 $7.59 Steering Wheel Nut (For FDS111) transmission: 611, 671, 681, 771, 811, NOTE: Chrome. 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121 FDS1594 $4.49 Dome Nut Washer w/ Beveled Edge (1959-64), Replaces: C0NN7202B (For FDS111) NOTE: Clear zinc plating. FDS1232 $48.95 Select-o-Speed Control Selector Cover FDS363 $51.59 Steering Wheel w/ Cap fits: 2000, 2310, fits the following w/Tractor Select-o-Speed 2600, 2610, 2810, 2910, 3000, 3400, 3500, transmission: 611, 671, 681, 771, 811, 3600, 3610, 3910, 4000, 4000SU, 4400, 4500, 871, 881, 971, 981, 1811, 1871, 1881, 4600, 4610, 4600SU, 5000, 5100, 5600, 5610, 2000, 2111, 3000, 4000, 4121, 5000 6600, 6610, 7000, 7100, 7200, 7600, 7610, (1959-75), Replaces: C5NN7N013A, (1965-93); Industrials: 231, 335, 340, 445, 313936 NOTE: Fits left or right side. 531, 540, 3400, 3500, 4400, 4500 Replaces: D6NN3600B, 82016841 FDS3818 $33.99 Select-o-Speed Transmission Oil Filter (17-5/8" dia., 3/4" shaft, 36 splined hub, Assembly fits: 611, 671, 681, 771, 811, 3 covered spokes) 871, 881, 971, 981, 1811, 1871, 2111 FDS426 $5.95 4-cyl., 4121 4-cyl. (All w/ SN: 125738 Steering Wheel Nut (For FDS363) Steiner& up) (1960-64) fits: Same as FDS363; Also fits 1801, 4040, Replaces: C0NN7B155A 4140, 6000 series, Replaces: C5NN3N602A, FDS493 $99.99 Clutch Torque Limiter Disc fits: 611, D5NN3N602A (11/16" x 20 NF) 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 FDS2851 $4.99 Steering Wheel Cap fits: Same as FDS363; 4-cyl., 4121, (1959-64), 6000 (1961- 67) Also fits 5610S, 8000, 9000 (All w/ Select-o-Speed transmission) Replaces: C7NN3655B, 82002600 Replaces: 313875, E8NN7A539AA (2.128" O.D. where cap slips in steering (7-1/4" O.D., 20 spline, wheel; 1.025" tall; 2.380" O.D. above 1.080" spline I.D.) steering wheel)

210 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Steering wheels, parts cont... Steering column grommets, bushing Part # USD Description / Application cont... FDS1894 $69.95 Steering Wheel Emblem fits: 6000 (1961- Part # USD Description / Application 67); Serviceable for 6000 Commander FDS424 $6.89 Steering Column Grommet fits: 2000, 2310, Replaces: CONN16600A; Serviceable for 2600, 2610, 2810, 2910, 3000, 3600, 3610, C5NN3A515A (10 x 32 thread, 2.475" tall, 3910, 3930, 4000, 4000SU, 4600, 4600SU, 3.675" length of widest point) USA made 4610, 5000, 5100, 5200, 5600, 5610, 6600, FDS195 $41.99 6610, 7000, 7100, 7200, 7600, 7610, 7710, Steering Wheel fits: Fordson Major, Super 7810; Industrials: 231, 233, 234, 335, 420, Major, Power Major (1952-64) 515, 530A, 531, 532, 535, 550, 3400, 3500, Replaces: E1ADKN3600A 4400, 4500 (1965-91) (17-1/2" dia., 1" dia. shaft w/ 6 splines on Replaces: C5NN3A566B, D2NN3A566B end, 3 covered to center spokes) (3" O.D., 1-1/4" hole I.D.) FDS215 $54.50 FDS1380 $7.99 Steering Wheel fits: Dexta, Super Dexta Upper Steering Column Bushing (1957-64), Replaces: 957E3600 (For Manual & Power Steering) New Holland (17-3/4" dia., 1-1/4" shaft w/ 48 splines, fits: 2000 - 7610 (1965-91)

3 covered to center spokes) Replaces: C5NN3517A, D5NN3517A, Ford 81811803 w(0.795" I.D. x 1.445" O.D. x 1.525" length) ABC4275 $53.99 Steering Wheel w/ Center Cap Inc.® fits: 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1320, 1520, 1620, 1715, 1720, 1920, Chassis parts 2120 Japan built, 3415, T1510, T1520, TC1510, TC1520, TC30, TZ18DA, TZ22DA, TZ24DA, TZ25DA (1979-07) Steering wheel plates - USA made Replaces: SBA334300191 (15-3/4" dia., Part # USD Description / Application 3-1/2" dish, 18 splines) NOTE: Verify FDS163 $17.89 spline count before ordering. Parts, MIS103 $13.25 Sherman Transmission Instruction Plate fits: Ford models w/ Sherman Step Up / Steering Wheel Spinner Step Down transmission (1939-64) fits: Ford modelsNOTE: Aluminum.

ABC4246 $15.99 FDS395 $15.95 Deluxe Steering Wheel Spinner Sherman Transmission Instruction Plate fits: Ford modelsNOTE: Rubber. fits: NAA - 4000 4-cyl. series (All w/ 4 Fits all steering wheels up to 1-1/4" thick. speed transmission) (1953-64) Tractor NOTE: Installs on dash. FDS162 $12.99 Steering column grommets, bushing Power Steering Plate fits: 600, 700, 800, 900, Part # USD Description / Application 2000 4-cyl., 4000 4-cyl. series (1957-64) FDS229 $4.95

Steering Column Grommet fits: 8N (1947-52), Replaces: 8N3578

FDS375 $9.99 SteinerSteering Column Grommet fits: NAA, Patent data plates Jubilee, Golden Jubilee (1953-54) USA made Replaces: NAA3578B FDS339 Replaces: 9N14001 (2-5/8" O.D.) FDS338 Replaces: 8N14001

FDS373 $9.99 FDS339 FDS338 Steering Column Grommet fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series Description Part # USD (1954-64), Replaces: NCA3578A 9N, 2N (1939-47) ...... FDS339...... $13.59 (2-3/16" O.D.) 8N (1947-52) ...... FDS338...... $13.59

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 211 Steering parts Steering parts cont... Part # USD Description / Application Part # USD Description / Application FDS044 $149.99 ABC3674 $2.70 Upper Steering Column Felt Seal (RH) fits: 8N - 7610 (1947-91) w/out telescoping steering column Steering Gear Sector w/ Arm Replaces: 8N3570, 83911611 fits: 9N, 2N (1939-47) (1.325" O.D., 0.275" thick, 0.775" I.D.) USA made NOTE: See website for FDS045 $149.99 FDS044 Replaces: 9N3526 additional applications. Does not fit (LH) FDS045 Replaces: 9N3527 compact models. ABC528 $43.99 Top Bearing Steering Shaft Kit (For manual steering only) fits: 8N, FDS046 $79.95 Steering Shaft w/ Pinion Jubilee, NAA, 600, 601, 700, 701, 800, fits: 9N, 2N (1939-47) 801, 900, 901, 2000, 4000 4-cyl. (1947-64); Replaces: 9N3525 6000 (1961-67), Replaces: 8N3518 (seat), 8N3520 (spring), C5NN3N716A (steel FDS408 $18.95 Steering Wheel Cover w/ Grease Fitting bearing assy) Hole, Spring & Felt Seal fits: 9N, 2N Ford (1939-47), Replaces: 9N3669 ABC3678 $23.99 9-pc. Steering GearInc.® Box Shim Kit NOTE: Chrome. fits the following w/ manual steering: New Holland New 8N, NAA, Jubilee, 600, 800, 2000, 2600, FDS388 $79.95 Steering Shaft Bearing Kit fits: 9N, 2N 2610, 3000, 3600, 3610, 3910 series (1947- (1939-47); 700, 900 (1954-64) 2/90), Replaces: 8N3549, 47432118 Replaces: 68-3571A (bearing), 9N3573 (002" steel shim (2), .005" steel shim (2), (cone), B3552 (bearing cup) NOTE: Will .010" steel shim (2), .025" steel shim (1), fit FDS046. Kit includes (2) bearings, (2) .028" steel shim (2)) USA made cones, (2) bearing cups. Bearing & cup NOTE: See website for all applications. (race) must be used together. Do not FDS047Parts, $154.50 Double LH Steering Sector (For manual mix bearing or cup w/ old original parts. & power steering tractors w/ adjustable FDS188 $199.95 steering box) fits: 8N SN: 216989 & up,

Chassis parts Steering Shaft & Nut Assembly fits: Early NAA, Jubilee, 600, 800, 2000, 4000 4-cyl. 8N up to SN: 216988 (1947-49) w/ 4 bolt series (1949-64), Replaces: 8N-3527-B side sector, Replaces: 8N3575A (6-7/8" long; 7 teeth + 1 double tooth) (LH spiral • 20-1/8" long from tip to tip) NOTE: For wide-style tooth (measures FDS110 $139.95 Steering Shaft & Nut Assembly fits: Late .200" wide at top of the tooth). Two 8N SN: 216989 & up (1949-52) w/ 2-bolt different tooth widths were made so side sector, Replaces: 8N3575B customer may have to purchase both (RH spiral • 20-1/8" long from tip to tip) FDS048 & FDS047. TractorFDS048 $154.50 FDS387 $29.99 Steering Shaft Bearing Kit (For manual Single RH Steering Sector (For manual steering tractors) fits: 8N, NAA, & power steering tractors w/ adjustable Jubilee, 600, 800, 2000, 3000, 4000 (1947 steering box) fits: 8N SN: 216989 & up, - 8/31/1968), Replaces: 8N3552 (bearing NAA, Jubilee, 600, 800, 2000, 4000 4-cyl. cup), New C5NN3552A (bearing cup), series (1949-64), Replaces: 8N-3526-B 8N3571 (bearing) NOTE: Kit includes (6-7/8" long; 5 teeth) NOTE: For wide- (2) bearings, (2) bearing cups. Bearing & style tooth (measures .200" wide at top cup (race) must be used together. Do not of the tooth). Two different tooth widths mix bearing or cup w/ old original parts. were made so customer may have to purchase both FDS048 & FDS047. FDS108 $129.95 SteinerSteering Shaft w/ Recirculation Ball ABC441 $25.99 Assembly fits: NAA, Jubilee, Golden Steering Sector Hardware & Seal Kit Jubilee (1953-54), Replaces: NAA3575C (For manual & power steering tractors) (22-1/4" long from tip to tip) fits: 8N SN: 216989 & up w/ adjustable side sector gears, Jubilee, NAA, 600, 800, FDS109 $129.95 Steering Shaft w/ Recirculating Ball 2000 4-cyl., 4000 4-cyl. series (1949-64) Assembly (For manual steering only) Replaces: 251294 NOTE: Kit includes oil fits: 600, 800, 2000, 4000 4-cyl. series seal, adjuster bolt, nut, washer, O-rings, (1954-64), Replaces: NCA3575A shim washers, felt seal. 2 used per (23-3/8" long from tip to tip) tractor; Sold individually.

212 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Steering parts cont... Power steering parts Part # USD Description / Application Part # USD Description / Application ABC4226 $8.85 Steering Sector Gear Bushing FDS4436 $9.99 NEW! Steering Shaft Oil Seal fits: 8N SN: 216989 & up, Jubilee, NAA, (Upper) (For Power Steering) fits: 600, 601, 800, NAB, 600, 601, 800, 801, 2000 4-cyl., 4000 801, 2000, 2600, 3000, 3000SU, 3600, 4000, 4-cyl. (mid 1949-64), Replaces: 8N3553, 4000SU, 4600, 5000, 6600, 7600 AJ3576A FDS4436: Replaces: 83929295 FDS1205 $2.49 Steering Sector Felt Seal fits: 8N - 4000 FDS4691 $19.99 (0.865" I.D., 1.378" O.D., 0.362" thick 4-cyl. (1947-64), Replaces: 8N3586 (Lower) USA made NOTE: Felt. 2 used per FDS4691: Replaces: C5NN3N739A, tractor; Sold individually. Included in 86531349 (1.250 I.D., 1.756" O.D., 0.250" ABC441. wide) USA made NOTE: Rubber coated. ABC3737 $5.95 Steering Gearbox Side Sector Seal ABC4697 $2.89 NEW! O-Ring only (For Power Steering fits: 8N, NAA, 600, 601, 800, 801, 2000, Valve) fits: 600, 601, 800, 801, 2000 3-cyl., 2310, 2600, 2610, 3000, 3600, 3610, 3900, 2000 4-cyl., 2310, 2600, 2610, 2810, 2910,

4000, 4000SU, 4110, 4600SU (1947-81) 3000, 3600, 3610, 3910, 4000 4- cyl., New Holland Replaces: 8N3591B, C5NN3C615A, 4000SU, 4600SU, 4610, 5000, 5600, 5610, D5UZ3591A (1.125" I.D., 1.442" O.D., 6600, 6610, 7600, 7610, Replaces: 87150S94 Ford .200" wide) NOTE: 2 used per tractor; (2.800" I.D., 0.103" thick, 90 Duro) Sold individually. USA made NOTE:Inc.® 2 used per tractor; Sold individually. ABC2008 $13.65 Steering Gearbox Side Sector Seal ABC1233 $385.00 Belt Driven Power Steering Pump Chassis parts fits: 700, 900 series (1954-64) (For tractors using Eaton style pump) Replaces: NCB3591B fits: 601, 700, 701, 801, 900, 901, 1801, (1.375" I.D., 2.110" O.D., 0.315" wide) 2000, 4000 4-cyl. (1957-64) (All w/ ABC1996 $10.95 Steering Gearbox Side Sector Seal fits: reservoir on top of pump) Replaces: C0NN3A674H, C3NN3A674C, 5000, 5110, 5600, 5900, 6410, 6600, 6610, Eaton P761, 20928, 503-1003, 503-1005-005 7000, 7600 (All w/ manual steering) (1965- Parts,NOTE: For 5/8-18 male inverted flare 81), Replaces: C5NN3C615B, 81803190 pressure line. Can be adapted to tractors (1.500" I.D., 2.000" O.D., 0.250" wide) using Char-Lynn power steering FDS3213 $619.99 Steering Gearbox fits: 8N SN: 216989 & w/ Eaton pump. Does not include up (1949-52) using (2) bolt side sectors brackets, reservoir or pulley. Some Ford Replaces: 8N3503B NOTE: This gearbox applications will require a new pressure is shipped dry & needs to have 90 wt. hose to be made. oil added before using. Must reuse old ABC3275 $19.59 10-pc. Eaton Power Steering Pump Seal & pitman arms. O-Ring Kit fits: 601 - 4000 4-cyl. (1957-64) FDS3219 $619.99 Steering Gearbox fits: NAA, Jubilee, (All w/ Eaton belt driven power steering pump w/ reservoir on top of pump) Golden Jubilee (1953-54) (All w/ manual Tractor NOTE: See website for all applications. steering), Replaces: NAA3503B Includes filter O-ring. Fits ABC1233. NOTE: This gearbox is shipped dry & needs to have 90 wt. oil added before ABC3277 $12.95 Power Steering Pump Filter using. Must reuse old pitman arms. fits: 601 - 4000 4-cyl. & Majors (1957- 64) (All using Eaton belt driven power FDS3224 $619.99 Steering Gearbox fits: 600, 800, 2000 steering pump w/ reservoir on top of 4-cyl., 4000 4-cyl. (1954-64) (All w/ pump), Replaces: AE33538A, E101LD9 manual steering); Fits Utilities only not (1.020" I.D., 2.990" O.D., 1.610" height) Row-Crops, Highcrops, Offsets USA made NOTE: Used w/ ABC1233 Replaces: NCA3503A, C3NN3503E apps. Check website for additional SteinerNOTE: This gearbox is shipped dry & application information. Reservoir needs to have 90 wt. oil added before gasket / O-ring not included. using. Must reuse old pitman arms. FDS1274 $52.95 Power Steering Pump Pulley FDS4644 $425.00 NEW! Manual Steering Assembly (For tractors w/ reservoir on top of fits: 2000 3-cyl., 2310, 2600, 2610, 2810, pump) fits: 601, 700, 701, 740, 801, 900, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 901, 950, 960, 2000, 4000 4-cyl. series 3910, 3930, 4000 3-cyl., 4100, 4110, 4600, (1957-64), Replaces: 231102, EBJ33556A 4610 (1965 & up) (3.750" O.D., .671" bore, .1/8" keyway, Replaces: E4NN3503CA NOTE: Steering 1/2" wide belt groove) NOTE: Cast iron. box for non-cab models. Power steering parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 213 Power steering parts cont... Power steering parts cont... Part # USD Description / Application Part # USD Description / Application FDS1350 $256.99 Power Steering Pump w/ Reservoir ABC267 $34.50 Power Steering Cylinder End fits: 2000, fits: 2000 - 2600, 3000 - 3900, 4000 - 4600, 2610, 3000, 3610, 4610 series (1965-89) 5000 - 5700, 6600, 6700, 7000 - 7700 (All Replaces: C5NN3A302B (7/16" - 20 internal 10/1968-81), Replaces: D8NN3K514GA, thread) NOTE: Will not fit tractors below GB, GC, E6NN3K514EA 1964. LH & RH are the same. (2.74 GPM, 1100 PSI) NOTE: Pressure is preset at 1100 PSI. Has 1 return port, if your original has 2 ports you will need to add a "tee". When mounted return Radius rod parts fitting is at 1:00. FDS1382 Fits: 2N - 4600SU (1942-90) ABC3832 $8.50 Power Steering Pump Filter w/ Sealing FDS1382 Replaces: 8N3440B, O-ring fits the following w/ Plessey EONN3N406BA FDS1384 Replaces: 9N3442, power steering pump w/ reservoir FDS1384 on the rear of the pump: 2000 3-cyl., EONN3N442BA 3000, 4000 3-cyl., 5000, 7000, 8000, 9000 Description Part # USD (10/1968-75), 2600 - 9600 (1975-81), 2610 Radius Rod Ball Cap...... FDS1382...... $9.50 - 8010, 4130 - 8830, TW5 - TW35,(1982-93)

Ford NOTE: 2 used per tractor; Sold individually. plus Industrials, Replaces: EDPN3K758A, Inc.® Radius Rod Ball Socket...... FDS1384...... $19.85

New Holland New 84536381 (3.980" O.D., 1.280" tall) USA made NOTE: See website for all NOTE: 2 used per tractor; Sold individually. applications. FDS3842 $11.95 Plessey Power Steering Pump Seal Kit Fits the following w/ Plessey power Tie rod assembly, ends steering pump w/ reservoir on the rear NOTE: Length is from end of shaft/tube to center of post/ball of the pump: 2000 3-cyl., 3000, 4000 3-cyl., stud. 5000, 7000, 8000, 9000 (10/1968-75), 2600 Part # USD Description / Application - 9600 (1975-81), 2610 - 8010, 4130 - 8830, Parts, FDS2478 $99.95 Tie Rod Assembly (Drag link Assembly) TW5 - TW35,(1982-93) plus Industrials (RH) fits: 9N, 2N (1939-47)

Chassis parts , Replaces: DHPN3A674B, 83910651 FDS2478 Replaces: 9N3304 NOTE: See website for all applications, FDS2474 $99.95 (LH) FDS2474 Replaces: 9N3305 Depending on the application you may NOTE: Adjustable from approximately have extra O-rings. 38-1/2" to 39-3/16" c.c. tie rod studs. Tie FDS1163 $5.99 Power Steering Pump Cap fits: 2000 - rod ends are sealed and permanently TW35 w/ horizontal power steering greased. Grease zerks are cosmetic only. pump reservoir (All 10/1968-93) FDS314 $17.95 Front Tie Rod End fits: Some 9N, 2N Replaces: C9NN3D588A, D2NN3A006B (1939-47), Replaces: 9N3270 (1.500" I.D.) Tractor (.687" - 18 RH thread, 3.187" to center of post) FDS459 $259.99 Power Steering Cylinder fits: 601, 801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, FDS2487 $99.95 Tie Rod Assembly (Drag link Assembly) 3600, 3610, 4000 & SU, 4600 SU, 4610 (RH) fits: 8N up to SN: 216988 (1947-49) w/ (1957-89) (All w/ dual cylinder steering) FDS2482 $99.95 early 4 bolt side sector steering gear box Replaces: D4NN3A540B, D4NN3D547B, (LH) FDS2487 Replaces: 8N3304A E2NN3A540BA, E4NN3A540AA FDS2482 Replaces: 8N3305A (1/2" dia. rod, 7/16" threaded end) NOTE: Adjustable from approximately NOTE: LH & RH are the same. 36" to 39-1/2" c-c tie rod studs.Tie rod ends are sealed and permanently greased. FDS461 $259.99SteinerPower Steering Cylinder fits: 601, Grease zerks are cosmetic only. 801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3600, 3610, 3910, 4000 & FDS393 $79.99 Tie Rod Assembly (Tie Rod Ends, Clamps SU, 4600 SU, 4610, 231, 335, 531 (1961- & Drag Link Tube) fits: 8N SN: 216989 89) (All w/ dual cylinder steering) & up (1949-52) w/ late adjustable style Replaces: C5NN3A739G, C5NN3C578B, steering box, Replaces: 8N3304B, 8N3305B D4NN3A540A, E9NN3A540AA (32-1/2" long tube; 35-1/4 - 38-1/4" (5/8" dia. rod, 7/16" threaded end) adjustment) NOTE: Check measurement USA made NOTE: Can also replace 1/2" before ordering. Will also fit earlier 8Ns rod cylinders. LH & RH are the same. when late steering box is used.

214 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tie rod assembly, ends cont... Tie rod boots cont... Part # USD Description / Application Part # USD Specifications FDS315 $17.95 Universal tie rod boots fits: Ford models Front Tie Rod End fits: 8N (1947-52) Specify size when ordering (Base x Height x Hole I.D.) Replaces: 8N3270 (.687" - 18 LH thread, 4.00" to center of post)

FDS2497 $99.95 Tie Rod Assembly (Drag link Assembly) ABC368 JDS736 ABC371 ABC369 ABC370 (RH) fits: Jubilee, 600, 800, 2000 - 4000 4-cyl. FDS2492 $99.95 Utilities only (1953-64) (All w/out power ABC368 $3.99 Also fits as a rear tie rod boot for 601, 801, (LH) steering) 2000, 4000 4-cyl., Replaces: A0NN3324A FDS2497 Replaces: NAA3304 (1.675" base, .900" tall, .625" hole I.D.) FDS2492 Replaces: NAA3305 JDS736 $4.89 (1.500" base, .735" tall, .550" hole I.D.) NOTE: Adjustable from approximately ABC371 $3.99 40" to 46-1/2" c.c. tie rod studs. Tie rod (1.300" base, .965" tall, .500" hole I.D.) ABC369 $3.49 ends are sealed & permanently greased. (1.575" base, .600" tall, .650" hole I.D.) New Holland Grease zerks are cosmetic only. ABC370 $3.99 (1.800" base, .765" tall, .740" hole I.D.) Ford ABC235 $18.95 Front Tie Rod End fits: Dexta, Super Dexta, NAA, Jubilee, 600, 601, 800, 801, 2000 Inc.® 4-cyl., 4000 4-cyl. (1953-64) (All w/ manual steering, not industrial axle) Front axles, parts

Replaces: 957E3290B, NAA3270A Part # USD Description / Application Chassis parts (.687" - 18 LH thread, 3.875" to center of FDS3917 $172.50 post) Front Center Axle w/ Bushing fits: 8N, Dexta, Super Dexta, Jubilee, Golden ABC265 $17.59 Rear Tie Rod End fits: Some 9N, 2N, 8N, Jubilee, NAA, 600, 601, 800, 801, (2000 NAA, 600, 601, 800, 801, 2000 4-cyl., 4000 4-cyl.), (4000 4-cyl.) series (1947-64) 4-cyl. (1939-64) (All w/ manual steering, (All w/ regular front axle not H.D. axle) not industrial axle), Replaces: NAA33271A Parts,Replaces: NAA3010B2, D9NN3010EA (.687" - 18 RH thread, 4.250" to center of post) FDS3935 $189.99 Front Center Axle w/ Bushing fits: 2000 3-cyl., 2100, 3000, 3055, 3100, 3110, 3120, 4110 3-cyl., 4140 3-cyl. (1965- 7/31/70) Tie rod boots (All w/ adjustable beam style axle w/ provisions for the radius rod pins & Part # USD Description / Application 1-3/4" dia. center pin) FDS336 $3.99 Replaces: C5NN3010D, 81802760, Front Tie Rod Boot fits: 9N, 2N (1939-47) 86580572 (20" from center of pin hole to Replaces: 78-3332 (1.200" base, .475" tall, end of axle, 1-3/4" center pin hole) .500" hole I.D.) TractorFDS3940 $189.99 Front Center Axle w/ Bushing fits: 2000 3-cyl., 2100, (2310 1982 & up), 2600, 2610, FDS337 $4.49 Front Tie Rod Boot fits: 8N, NAA, Jubilee, 2810, 2910, 3000, 3100, 3110, 3120, 3600, 600, 800 (1947-57), Replaces: 8N3332 3610, 3900, 3910, 4000SU, 4100, 4110, (1.450" base, .600" tall, .550" hole I.D.) 4600SU, 4610SU; Industrial: 230A, 231, NOTE: Also works as a power steering 233, 333, 530A, 531 (8/1970 - 2/1990) cylinder end boot 601 - 4610. (All w/ radius rods that pin to the axle extensions, not the center axle & 2" FDS335 $9.99 Rear Tie Rod Boot w/ Rubber Insert dia. center pin), Replaces: C7NN3010F, fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 81822706 (21-1/2" from center of pin hole Steiner2000 4-cyl., 4000 4-cyl. (1939-64) to end of axle, 2" center pin hole) Replaces: 9N3324, AONN3324A ABC088 $34.95 Front Axle Support Pin fits: 9N, 2N, 8N, (1.425" base, .850" tall, .700" hole) NAA, Jubilee (1953-54); Early 600, 800 FDS484 $16.50 Rear Tie Rod Boot w/ Leather Insert series (1954-55); 6000 w/ All Purpose fits: 9N, 2N, 8N; Serviceable for NAA, wide front axle (1/1963 - 12/1966) Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. Replaces: NAA3126B, 2N3126B, 2N3126E, (1939-64), Replaces: 9N3324 9N3126A (1.743" O.D., 1.310" I.D., 4.425" NOTE: Pin is not threaded. (1.425" base, .850" tall, .700" hole) length) NOTE: Exact of original. Front axles, parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 215 Front axles, parts cont... Spindles, parts cont... Part # USD Description / Application Part # USD Description / Application FDS4108 $18.95 Threaded Front Axle Pin fits the following ABC151 $10.59 Thrust Bearing (For Front Spindle) w/ regular all purpose axle using fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, threaded axle pin: 600, 601, 800, 801, 2000 700, 800, 900, 2000, 4000 series, Dexta, 4-cyl., 4000 4-cyl., (Jubilee, NAA when Super Dexta, 2000, 3000, 4000SU (1939- updated to threaded pin) series (1953-64) 89) (All w/ adjustable I beam regular Replaces: NCA3127A (1.745 O.D., 4.500" front axle, not H.D. axle), Replaces: length, threaded ends) NOTE: Verify if C0NN3123B (1.350" I.D., 2.195" O.D.) pin is threaded or plain as both were FDS4377 $9.99 NEW! Spindle Bearing fits: TW10, TW20, available. TW30, (2000 3-cyl. 1965-74), 2310, 2600, FDS4514 $9.99 2600V, 2610, 2810, 2910, 3230, 3430, 3600, 3600V, 3610V, 3900, 3910, 3930, (4000 4-cyl. NEW! Axle Pin Locking Flange 1962-64), 4110, 4120, (4130 3-cyl. 1990-99), fits: Same as FDS4108 4330, 4340, 4600, 4600SU, 4610, 4630, 4830, Replaces: NCA3128A 5000, 5030, 5340, 5600, 5610, 5700, 5900, 600, 6000, (601, 801 both 4-cyl.), 650, 6600, 6810, ABC379 $10.99 Front Pivot Bushing fits: 9N, 2N, 8N, 7000, 7410, 7600, 7610, 7700, 7710, 800, 8000, 8400, 8600, 8700, 9000, 9200, 9600, 9700;

Ford NAA, Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. series (1939-64) (All w/ standard Industrials gas, diesel,Inc.® Replaces: 81802806, New Holland New front axle), Replaces: 2N3039 81802871, C5NN3A299A (1.770" I.D., 1-15/16" O.D., 1-1/2" long) ABC1442 $3.39 Spindle Dust Seal fits: 9N, 2N, 8N, NAA, NOTE: Straight bushings not flanged. Jubilee, 501, 600, 601, 700, 701, 800, 801, Will not fit heavy duty or industrial axles. 900, 901, 2000 4-cyl., 4000 4-cyl. (1939-64); 2000 - 4600SU, 4610, 6000 (1965-90) Replaces: 8N3528, C5NN3125A (1.225" I.D.) NOTE: Mounts on top of Spindles, parts spindle, under spindle arm. Part # USD Description / Application Parts, ABC468 $3.50 Front Spindle Bushing fits upper & lower FDS3704 $59.95 on the following models: 9N, 2N, 8N,

Chassis parts (LH) NAA, Jubilee (1939-54); Fits upper only on the following models: 501, 600, 800; 700, 900 series both w/ wide front; 2000 3 & Spindle fits: 8N (1948-52); Golden Jubilee, 4-cyl., 2600, (3000 except Vineyard), 3600, Jubilee, NAA (1953-54) 3610, 3900, 3910, 4000 4-cyl., 4100 3-cyl., FDS3704 Replaces: 8N3106, 4600SU, 4610, 6000, Dexta (1955-90) (All F3NN3106AA w/ standard adjustable wide front, not for FDS3711 Replaces: 8N3105, H.D. axle), Replaces: 2N3109 (1.250" I.D., F3NN3105AA 1.375" O.D., 1.500" long) NOTE: Will not FDS3711 $59.95 (10.750" machined uprightTractor shaft, 1.250" fit heavy duty or industrial axles. (RH) shaft O.D., 1.187" inner bearing dia., ABC381 $12.95 Spindle Bushing Kit fits: 600, 700, 800, 0.750" outer bearing dia., machined for 900 w/ wide front, 2000, 2600, 3600, 1/4 x 3/4" key) NOTE: Does not fit 9N 3900, 4000 except Vineyard, Dexta, Super or 2N unless you have a 8N spindle arm Dexta, 3000, 4100, 4600, 4600SU, 4610 and change the woodruff key. (All w/ standard axle) (1954-90) Replaces: (2) 2N3109 (upper), (2) NCA3110A (lower) (2N3109 = 1.250" I.D., 1.375" O.D., 1.500" long; NCA3110A = 1.352" I.D., 1.474 O.D., 1.490" long) FDS3944 $29.95 SteinerSpindle Arm fits: Dexta, Super Dexta, NOTE: Will not fit heavy duty or Golden Jubilee, Jubilee, NAA, NAB, 8N, industrial axles. 600, 601, (700, 701, 900, 901 w/ factory FDS4379 $3.75 NEW! Spindle Bushing fits: 2310, 2610, wide front end), 800, 801, 2000, 2600, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 4000 3 cylinder (From 65-74), 4100, 4110, 3910, 4000 4-cyl., 4000SU 3- cyl., 4610SU 4130 3 Cylinder (From 90-99), 4330, 4340, (1947-87), Replaces: 310799 4410, 4600, 4600SU, 4610, 4630, 4830, NOTE: LH & RH are the same. Uses 1/4" 5030; Ind: 230A, 234, 334, 335, 530A gas, x 7/8" Woodruff key. See website for all diesel, Replaces: 81802798, C5NN3110B applications. (1.600" O.D., 1.500" I.D., 1.500" long)

216 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Seat pan, parts Monroe® easy ride seat parts cont... The following seat parts fit 9N, 2N (1939-47): Part # USD Description / Application Part # USD Description / Application MHS044 $43.99 Seat Shock Absorber w/ Bushings FDS067 $49.99 fits: 8N, NAA, Jubilee (1947-54) Seat Pan, Replaces: 9N400C w/ optional Monroe® Easy Ride seat (19" dia.; 5/8" center bolt hole) Replaces: 231239 (Center-to-center NOTE: Steel, 9 hole. Uses 1-bolt mount. compressed = 6-1/4", fully extended = 8-1/4) NOTE: One horizontal bolt hole ABC372 $18.99 at each end. Seat Repair Kit w/ Rivets (For FDS067) ABC526 $10.25 (5-1/2" O.D.; 5/8" center bolt hole) Seat Shock Bolt (For IHS329, MHS044) USA made Replaces: 230290 (7/16"-20 NF, .625" shoulder, 2.380" o/a length) USA made FDS068 $44.95

IHS030 $29.95 Seat Spring, Replaces: 9N404 Seat Spring Coil fits: 9N, 2N, 8N, NAA, ® Jubilee (1939-54) w/ optional Monroe New Holland Easy Ride seat, Replaces: 230279 Ford USA made

Flip-back seat pan, parts ABC4566 $9.99 NEW! ConicalInc.® Seat Spring Gasket (Pad) The following seat parts fit 8N, NAA, Jubilee, 501, 600, 700, fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) ®

800, 900, 1801 series, (2000, 3000 3-cyl. series 1965 & up), w/ optional Monroe Easy Ride seat Chassis parts (2000, 4000 4-cyl. series 1947-64), Some Dexta, Super Dexta: USA made NOTE: Fits between the seat Part # USD Description / Application pan and the IHS030 seat spring. FDS105 $51.50 IHS585 $24.99 Seat Pivot Support Rod fits: 8N, NAA, Seat Pan w/ Hinge Half (For Flip-Back Jubilee (1947-54) w/ optional Monroe® Seat), Replaces: C5NN400AE Easy Ride seat, Replaces: 230287 (6") NOTE: Serviceable for Rest-o-Ride NOTE: Includes (2) flat washers, (2) seats. Parts, rubber bushings, (2) #5 bolts. FDS106 $16.99 IHS325 $2.15 Seat Shock Bushing only (For horizontal Seat Hinge & Bolt (For Flip-Back Seat) bolt hole) fits: 9N, 2N, 8N, NAA, Jubilee ® Replaces: NCA436A, 352644S36 (1939-54) w/ optional Monroe Easy Ride seat, Replaces: 230288 (5/8" dia. hole) NOTE: Rubber. 2 used FDS107 $39.99 Restoration quality Seat Spring per horizontal bolt; Sold individually. (For Flip-Back Seat), Replaces: NCA404B (3" wide) NOTE: The only correct width spring on the market. TractorSeats, parts FDS294 $11.95 Seat to Spring Retaining Clip w/ Rivets Part # USD Description / Application (For original 3" wide seat spring) FDS299 $54.95 Rubber Seat Spring fits: 501, 600, 700, 800, Replaces: 8N433 NOTE: Fits FDS107 (LH) 900, 1801, 2000, 4000 series (1955-64) w/ spring. FDS300 $54.95 "Rest-O-Ride" seats; Major, Super Major, FDS232 $3.99 (RH) Power Major w/ Deluxe seat; 6000 (1961- Seat to Spring Rubber Bumper 64) w/ Regular seat not Deluxe seat (For Flip-Back Seat), Replaces: 8N434B FDS299 Replaces: NDA448A (7/8" O.D.) NOTE: 1 required per tractor. FDS300 Replaces: NDA447A NOTE: FDS299 & FDS300 do not come Steiner FDS299 FDS300 w/ bushings. You must reuse old ones or purchase our FDS477 kit. Monroe® easy ride seat parts FDS477 $41.50 Part # USD Description / Application Seat Bushing & Pin Kit (For FDS299, IHS329 $29.99 Rear-Mounted Seat Shock Absorber w/ FDS300), Replaces: 230612, 230626, Bushings fits: 9N, 2N (1939-47) 305191 NOTE: Bushings must be w/ optional Monroe® Easy Ride seat reamed/honed when installed. (11-1/2" c.c. compressed; 18-1/8" fully extended) Seats, parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 217 Seats, parts cont... Tractor seat pads cont... Part # USD Description / Application Part # USD Description / Application JDS533 $25.99 Seat Adjustment Handle fits: 501, 600, FDS284 $44.50 700, 800, 900, 1801, 2000, 4000 series Tractor Seat Pad (Dark blue w/ white (1955-64) w/ "Rest-O-Ride" seats; Also piping w/ white "Ford" script) fits Major, Super Major, Power Major w/ Deluxe seat; Also fits 6000 (1961-64) w/ Regular seat not Deluxe seat FDS230 $43.99 Replaces: NDA462A Tractor Seat Pad (Red & white w/ red ABC445 $152.50 Universal Full Suspension Seat w/ Back "Ford" script) Rest & 5-Angle Base (w/ slide track & mounting brackets) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, FDS321 $44.50 1801, 2000, 2310, 2600, 2610, 2810, 2910, Tractor Seat Pad (Blue & white w/ blue 3000, 3400, 3500, 3550, 3600, 3610, 3910, "Ford" script) 3930, 4000, 4000SU, 4100, 4110 4400, 4500, 4600, 4600SU, 4610, 5000, 5600, 5610, 5610SU, 5900, 6600, 6610, 7000, 7600, 7610 FDS322 $42.99 (1939-92) (All w/out cabs), Replaces: Ford D9NN400DB12B NOTE: Can be adapted Tractor Seat Pad Inc.®(Gray & white w/ gray "Ford" script)

New Holland New to fit many utility tractors & lawn mowers. Customer may have to trim base on tractors using remote hydraulics. FDS1226 $43.75 FDS3397 $89.95 Tractor Seat Pad (Black w/ red/white (Blue) Upholstered Seat Pan fits: 1000 - 2110 "Ford" script, black/white "Tractor") Compact, 2000 3-cyl., 3000, 4000 3-cyl., 5000, 7000, 2600 - 6700, 2610 - 6610 (All using the original Ford deluxe seat MIS006DBParts, $36.50 suspension w/ 1-pc. seat cushion) FDS3907 $89.95 (1965-93) Tractor Seat Cushion (Blue & white) Chassis parts (Black) FDS3397 Replaces: D0NNA405C, E2NNA405AA99B FDS3907 Replaces: E2NNA405AA99M MIS006DR $35.99 NOTE: Black formed vinyl w/ drain hole. See website for full applications. Tractor Seat Cushion (Red & white)

Knoedler seat partTractor Fits: 9N - 4000 4-cyl. series, 4030, 4040, 4121, 4130, 4140 (1939-64) Fenders, parts - Licensed by Ford (All w/ Knoedler 1800 seat) "The only licensed stamped fenders on the market!" (3/8" I.D., 1" O.D., 1-1/8" flange) • Stamped w/ raised Ford "script" like original! USA made • Not plastic molded where embossed "Script" will sand off! • Fenders are sold individually. Description Part # USD • Fit to tractor before painting. Seat Bearing (For Aftermarket Knoedler Seats)..ABC537...... $14.99 NOTE: 2 to 8 used per tractor; Sold individually. Part # USD Description / Application FDS070 $104.95 Steiner Fender Skin only w/out raised Ford Tractor seat pads "script" imprint fits: 9N, 2N (1939-47); Fits Ford models w/ 19" pan (side to side) 8N (1947-6/1950), Replaces: 9N16312 (Foam pad, drawstring) NOTE: Steel, primer paint.

Part # USD Description FDS102 $174.99 FDS283 $43.99 Fender Skin only w/ raised Ford "script" imprint fits: 8N (6/1950-52), Tractor Seat Pad (Dark red w/ white Jubilee (1953), NAA (1954) piping w/ white "Ford" script) Replaces: 8N16312C NOTE: Steel, primer paint.

218 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fenders, parts - Licensed by Ford cont... Running boards, parts

Part # USD Description / Application Part # USD Description / Application ABC2255 $29.99 Fender Bolt Kit fits: 9N - NAA; ABC439 $72.99 Serviceable for 600 - 4000 4-cyl. (1939- (LH) 64) when not equipped w/ sway bar brackets or loader brackets Running Board (Foot Platform) w/out Replaces: 375651S8 NOTE: Includes 4 Rear Bracket Serviceable for 9N, 2N ABC440 $72.99 carriage bolts, nuts, lock washers. (1939-47) NOTE: Sold individually. (RH) FDS414 $259.95 Fender Skin only w/ raised Ford "script" imprint fits: 600, 800 series (1954-57), Replaces: NCB16312C (25" H x 48" W x 7" wide 'top lip') ABC446 $14.95 NOTE: Steel, primer paint. Rear Bracket Serviceable for 9N, 2N (1939-47) ABC437 $1.29 Rivet (For Fender Skin) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, FDS3241 $24.50 Front Running Board Support Bracket

900 series (1939-57) (.371" dia., 1.010" New Holland fits: 8N, NAA - 4000 4-cyl. (1947-64) o/a length, .746" head dia., .800"

Replaces: 8N16470 NOTE: 2 used per Ford useable length) NOTE: 4 used per tractor; Sold individually. Fits left or fender (9N, 2N, 8N, NAA), 8 used per right. Does not fit Row-Crops, LCGs, fender (600, 800); Sold individually. Inc.® Select-O-Speeds or Industrials. FDS238 $159.95 Fender Skin only w/ raised Ford FDS3244 $32.45

"script" imprint fits: 501, 601, 701, 801, Chassis parts 901, 1801, 2000, 4000 4-cyl.(1957-64); Right Rear Running Board Support Serviceable for 2000 3-cyl. - 4610 Bracket fits: 8N (1947-52) (1965-90), Replaces: C5NN16312AK, Replaces: 8N16486 C5NN16312AU, E1NN16315DA (17-3/4" H x 42" W) NOTE: Steel, primer paint. FDS2280 $17.85 Running Board to Bracket Hardware Kit fits: 8N, NAA, Jubilee, Golden Jubilee FDS301 $189.50 Parts, (1947-54), Replaces: 355471S8 (w/ script) Fender Assembly w/ Bracket fits: 601, NOTE: Includes (8) special carriage style 801, 1801 series, 2000, 2310, 2600, 2610, bolts, lock washers, nuts. 2810, 3000, 3400, 3500, 3600, 3610, 3900, 3910, 4000 & SU, 4100, 4110, 4400, 4500, 4600SU, 4610 (1957-90), 340A, 420, 445, Toolboxes FDS078 $135.99 445A, 535, 540A, 540B, 545 Part # USD Application (w/out Replaces: C5NN16312AK, script) C5NN16312AU FDS4331 $59.99 NEW! Fits: Early 9N w/ cast aluminum (Skin measures 17-3/4" H x 42" W) dash & battery tray (1939-mid 41) NOTE: Heavy gauge steel, primer Replaces: 9N17005A (4-1/2" wide box Tractor (6-1/4" wide w/ bracket), 5" tall, 11-1/4" paint. long; (2) 4-1/4" c.c. mounting holes) NOTE: Restoration quality. Powder FDS174 $15.99 Ford "Script" Painting Mask Kit coated gray. For 8N (1947-52) fenders & hoods FDS4322 $49.99 NEW! Fits: 2N (1942-47) USA made NOTE: (2) hood & (2) Replaces: 9N17005B (4-1/2" wide, 5" tall, fender self-adhesive masks per kit. 11-1/4" long; (2) 4-1/2" c.c. mounting holes Licensed by Ford. (5/16" O.D.)) NOTE: Restoration quality. FDS228 $15.99 Ford "Script" Painting Mask Kit Must use w/ stamped steel battery tray For NAA, Jubilee fenders & hoods; FDS1235. Powder coated gray. Steiner600, 800 series (1953-57) hood only FDS247 $34.50 USA made NOTE: (2) hood & (2) Fits: 8N (1947-52), Replaces: 8N17005 fender self-adhesive masks per kit. NOTE: Mounts under the hood. Licensed by Ford. Like original. FDS170 $48.99 Fender Light Brackets, Pair fits: 9N, FDS136 $79.95 Fits: Jubilee, NAA (1953-54) 2N, 8N, NAA, Jubilee (1939-54) Replaces: NAA16451 USA made Replaces: 9N13470, 9N13471 NOTE: Must be spot welded to existing NOTE: Ford grey. Sold as pair. running board. Toolboxes continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 219 Toolboxes cont... Brake parts cont... Part # USD Application Part # USD Description / Application FDS214 $53.45 ABC192 $49.95 Fits: 501, 600, 700, 800, 900, 2000, 4000 Brake Lining Set w/ Rivets fits: 9N, 2N 4-cyl. series (1954-64) (1939-47), Replaces: 9N2021B Replaces: NCA17005A NOTE: Fits (2" W x 15-1/2" L) NOTE: Set includes between step plate & rear axle housing. 4 brake linings w/ rivets. No returns on broken shoes. FDS3670 $44.95 Fits: 2000 - TW35 (1965-93), Industrials, ABC2953 $27.50 340A - 545D; Also serviceable for 501 (2-pc. set) - 981 when toolbox is mounted on the fender, Replaces: C5NN17005C, 83935319 (15" o/a length, 8-3/4" c.c. w/ (2) 5/16"- 18 NC threaded mounting holes, lower center side of the box has a 5/16"-18 NC Bonded Brake Shoe Set fits: 8N, NAA, threaded mounting hole) NOTE: See ABC083 $51.50 Jubilee (1947-54), Replaces: 8N2200B website for all applications. (4-pc. set) ABC308 $39.99 (Red) Ford Inc.® New Holland New

Fits: Ford models FDS1445 $129.95 NEW! $39.99 (4" wide, 11" long, 4-1/2" tall; 5-1/2" c.c. Brake Backing Plate fits: 8N, NAA, ABC4317 bolt holes) (Gray) Jubilee (1947-54), Replaces: 8N2212B USA made NOTE: 2 used per tractor; Sold individually.

FDS194Parts, $83.95 ABC472 $32.95 Brake Dust Shield w/ Felt Seal fits: 8N, Fits: Ford models NAA, Jubilee (1947-54) Chassis parts (4" wide, 16" long, 4-1/4" tall) Replaces: 8N2255 (plate), 8N2217 (seal) NOTE: 2 used per tractor; Sold individually. ABC4542 $24.99 (Red) FDS251 $5.49 Felt Seal only (For Brake Dust Shield) fits: 8N, NAA, Jubilee (1947-54) NEW! Fits: Ford models Replaces: 8N2217 USA made ABC4545 $24.99 (4-1/2" wide, 16-3/8" long, 4-13/16" tall) NOTE: 2 used per tractor; (Blue) Tractor Sold individually.

ABC084 $19.95 Bonded Brake Shoe fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (1954-64) Replaces: NCA2218B NOTE: 4 required Brake parts per tractor; Sold individually. Part # USD Description / Application MFS2948 $36.99 ABC2951 $42.50 (2-pc. set) (2-pc. set) Steiner

Bonded Brake Shoe Set fits: Dexta, Super Bonded Brake Shoe Set fits: 9N, 2N Dexta (1957-64), Replaces: 957E2019A ABC020 $74.95 (1939-47), Replaces: 9N2019 MFS2628 $72.50 (4-pc. set) (4-pc. set)

220 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Brake parts cont... Brake parts cont... Part # USD Description / Application Part # USD Description / Application

FDS1870 $0.89 Brake Drum Retaining Screw fits: 8N - FDS1205 $2.49 Brake Cross Shaft Felt Seal fits: 2000 981 (1947-59); Dexta, Super Dexta 3-cyl. - 8340 (1965-95), Replaces: 81826045 (1957-64), Replaces: 24667S, 24667S8 USA made NOTE: Felt. 2 used per (3/8"-16 NC x 3/4") NOTE: Zinc. 2 to 4 tractor; Sold individually. See website used per tractor; Sold individually. for all applications. FDS412 $7.99 Brake Adjusting Hole Cover fits: 8N, IHS1136 $6.49 Actuating Spring (For Disc Brakes) NAA, Jubilee, 501, 600, 601, 800, 801, 900, fits: 2810 - TS110 (1965-03) 901, 2000, 3000, (4000 4-cyl.) series (1947- Replaces: C5NN2N320A, 84814903 83), Replaces: H2092, ERK27670 (1.095" o/a length, .825" O.D., .110" dia. FDS241 $21.50 wire) NOTE: Sold individually. Parking Brake Lever fits: NAA, Jubilee, See website for all applications. 600, 700, 800, 900 (1953-57) Replaces: NAA2782A NOTE: 2 used per tractor; Sold individually. New Holland Brake repair kits

FDS3672 $42.50 Ford Bonded Brake Shoe Set fits: 2000 3-cyl., NOTE: Each complete kit contains all the small parts for 2600, 2610, 3000, 3400, 3500, 3600, 3610, comprehensive rebuilding of brake actuating mechanism 4110LCG (All built between 12/1966 when installing new shoes. Does notInc.® include shoes. - 4/1983 only), Replaces: C5NN2218F, F2NN2218AA (1-1/2" wide) NOTE: Set Part # USD Application includes 2 brake shoes for 1 side. FDS1224 $34.95 Chassis parts FDS3668 $69.99 Fits: 9N, 2N (1939-47) Brake Drum fits: Same as FDS3672 Replaces: 9N2065 Replaces: C5NN1126E (16" O.D., 13-7/8" NOTE: Repairs 1 side. I.D., 3-1/2" height) NOTE: Cast.

FDS252 $33.50 FDS417 $5.99 Brake Pedal Return Spring fits: 2000, Parts, 2310, 2600, 2610, 2810, 2910, 3000, 3600, Fits: 8N, NAA, Jubilee (1947-54) 3610, 3900, 4000, 4000 SU, 4100, 4110, Replaces: 8NAA2250 4500, 4600; Industrials: 230A & up (1965- NOTE: Repairs 1 side. 90), Replaces: C5NN2472B, E1NN2472BA (3.221" o/a length) NOTE: Mounts ABC165 $49.75 under running board. 2 used per tractor; Fits: 501, 600, 601, 800, 801, 900, 901, 2000 Sold individually. Go to website for full 4-cyl., 4000 4-cyl. series (1954-64) applications. Replaces: NCA2250 ABC1501 $10.95 Brake Pedal Shaft Seal fits: 2000 3-cyl., NOTE: Repairs 1 side. 3000, 3400, 3500, 4000,Tractor 4400, 4500, 5000, 7000 (1965-75) Replaces: D9NN2N289AA, 83924047 (1.125" I.D., 1.565" O.D., 0.250" wide) NOTE: 2 used per tractor; Differential gaskets Sold individually. Part # USD Application ABC3797 $3.59 Brake Rod Boot Seal fits: 2810 - 8210, ABC289 $1.25 Differential Side Cover Gasket fits: 9N, 3900, 4000 3-cyl., 4000SU - 7700, 4600, 2N, 8N, (501 - 4000 4-cyl.) (1939-64) 4600SU - 7600, 4140 3-cyl. - 8340, TS90, EXCEPT Jubilee; Also a PTO Shifter Plate TS100, TS110, TS115; Industrials: 250C - Cover to Differential Housing Gasket for 7500 (All 1965 - 12/2000 w/ mechanical Ford models (1939-64) including NAA, Steinerwet brakes), Replaces: C5NN2N336A, Replaces: 9N4131 USA made 82037652 (1/2" hole I.D., 2" boot I.D., 2-1/2" O.D.) NOTE: 2 used per tractor; FDS4674 $12.99 Sold individually. See website for all applications. ABC1225 $2.99 NEW! Differential Gasket and O-Ring Kit Disc Brake Ball fits: 2810 - 7710 (1965-90) fits: 800, Replaces: 752746 Replaces: D5NN2N141A (7/8" dia.) NOTE: Steel. Sold individually.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 221 Pinion seals Rear axle, hub, parts

Part # USD Description / Application Part # USD Description / Application ABC1543 $14.99 ABC261 $149.95 Pinion Shaft Seal fits: NAA, Jubilee Axle Shaft fits: 8N, NAA, Jubilee (1953-54), Replaces: NAA4676A (1947-54), Replaces: 8N4235C (1.375" I.D., 2.378" O.D., 0.312" wide) FDS043 $79.95

FDS4378 $8.49 Rear Hub Assembly w/ Bolts fits: 8N, NEW! Differential Pinion Seal NAA, Jubilee (1947-54) fits: 600, 800, 2120, 4120, Replaces: 312356, Replaces: 8N1171 CR15141

FDS255 $5.50 Rear Axle Hub Washer fits: 8N, NAA, Jubilee (1947-54), Replaces: 8N4293 USA made Rear end center housing gaskets FDS318 $11.50 Rear Axle Nut & Snap Ring Kit Part # USD Description / Application fits: 8N, NAA, Jubilee (1947-54) FDS3979 $6.95 Replaces: 8N4179, 8N4187, CBPN4179A (1-1/4" - 18) NOTE: Original style.

Ford Rear Center Housing to Transmission Case Gasket fits: Jubilee, NAA (1953-54) FDS479 $2.00 Inc.® New Holland New Replaces: NAA4662B Snap Ring only(For FDS318) Replaces: 8N4187

FDS3989 $4.95 Rear Center Housing to Transmission ABC234 $39.95 Case Gasket fits: 600, 620, 630, 640, 700, Wheel Clamp Lock Nut fits: 8N, NAA, 740, 800, 820, 840, 900, 940 (1954-55) (All Jubilee (1947-54) (1-1/4"-18) w/ 4 speed transmission up to SN: 14256) NOTE: No re-threading necessary on Replaces: NCA44025A worn shafts. FDS1201Parts, $7.59 FDS3992 $4.95 Rear Center Housing to Transmission Rear Lug Stud fits: 9N, 2N (1939-47) Case Gasket fits: 501, 600, 601, 700, Replaces: 9N1117

Chassis parts 701, 800, 801, 900, 901, 2000 4-cyl., 4000 (5/8"-18 NF, 1.875" o/a length) 4-cyl. series (1954-64) (All w/ 4-speed NOTE: 12 required per tractor; transmission SN: 14257 & up); Also Sold individually. fits Select-O-Speeds w/ 5 & 10 speed FDS1211 $1.45 Rear Lug Nut fits: 9N, 2N (1939-47) transmissions, Replaces: 310590 Replaces: 33806S7, 81871950 FDS4390 $12.99 NEW! Rear Center Housing to (5/8"-18 NF ) USA made Transmission Case Gasket fits: 2000 3-cyl. NOTE: 12 required per tractor; (1965-74), 2310, (3000 3-cyl. (1965-74)), Sold individually. 3055, 4110, 4600; IndustrialsTractorFDS394 $2.59 Rear Lug Stud fits: 8N, NAA, Jubilee, 501, Replaces: 86569738 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. NOTE: See website for all applications. (1947-64), Replaces: 312696 (5/8"-18 NF, 1-5/8" o/a length) USA made NOTE: 16 used per tractor; Sold individually. Rear end overhaul gasket kit ABC386 $1.75 Rear Lug Nut fits: 8N, NAA, Jubilee, 501, Part # USD Description / Application 600, 700, 800, 900, 1801, 2000, 2600, 2610, ABC433 $11.99 2810, 2910, 3000, 3610, 3910, 4000 4-cyl., 4110 (1947-83), Replaces: 8N1134 7-pc. Rear End Overhaul Gasket Kit (5/8"-18 NF) USA made NOTE: 16 used Steinerfits: 9N, 2N, 8N (1939-52) per tractor; Sold individually. For 2600 & (14-11/16" O.D. axle housing gasket) up check thread size. ABC357 $10.65 Rear Axle Shaft Paper Gaskets / Shims FDS3976 $27.99 21-pc. Premium Rear End Overhaul fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Gasket Kit fits: Jubilee, Golden Jubilee, Replaces: 9N4130, 8N4229E (0.015" thick) NAA (1953-54) NOTE: Steiner exclusive! USA made NOTE: Use for seal between This is the only complete kit on the bearing retainer, axle housing or backing market! See website for replacement plate. Use in multiples to replace shims numbers. 8N4229. Sold as a package of 10.

222 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Rear axle, hub, parts cont... Rear axle shaft seals cont... Part # USD Description / Application Part # USD Description / Application ABC264 $15.99 Outer seals Rear Axle Shaft Bearing Collar fits: 9N, 2N (1939-47), Replaces: 9N4132 ABC194 $18.99 Rear Axle Shaft Outer Oil Seal, Pair (1.985 I.D., 2.754 O.D., .705 wide) fits: 9N, 2N (1939-47) USA made Replaces: 9N4251, D6NN4251A MFS3941 $9.50 (2.375" I.D., 3.486" O.D., 0.657" wide) Rear Axle Bearing Collar fits: Dexta, Super Dexta (1957-64) FDS427 $34.75 Rear Axle Shaft Outer Oil Seal, Pair w/ Replaces: 957E4132 Sheet Metal Retainers fits: 8N up to SN: (2.245" I.D., 3.005" O.D., 0.700" wide) 486752 (1947-mid 52) FDS254 $13.99 Rear Axle Collar fits: 600, 601, 800, 801, Replaces: A8NN4248A (3.75" O.D.) 2000, 2600, 2610, 4000 4-cyl.; Industrials: NOTE: Used on tractors w/ sheet metal 231, 233, 234, 531, 1801 - 4140 4-cyl. seal retainers. 2 used per tractor; Sold in (1954 - 12/83) (All w/out differential pairs. New Holland lock), Replaces: NCA4132A ABC193 $16.99 Rear Axle Shaft Outer Oil Seal Pair

(2.055" I.D. x 3.445" O.D. x 1.200" wide) fits: 8N SN: 486753 & up, NAA, Jubilee Ford ABC199 $65.50 (Late 1952-54), Replaces: D5NN4115A Axle Shaft Cone fits: 9N, 2N, 8N, NAA, (2.750" I.D., 3.765"Inc.® O.D., 0.438" wide) Jubilee (1939-54), Replaces: 2N4221 NOTE: Used on tractors w/out sheet USA made metal seal retainers. Chassis parts ABC3953 $5.99 Rear Axle Outer Seal fits: 600, 601, 800, ABC197 $11.75 801 series, 2000 4-cyl., 2031, 2121, 2131, Axle Shaft Cup fits: 9N, 2N, 8N, NAA, 4000 4-cyl., 4031, 4120, 4121; Also fits the Jubilee, 501, 600, 601, 800, 801, 900, 901, following w/out diff. lock: 2000 3-cyl., 2000 4-cyl., 4000 4-cyl. series (1939-64) 2600, 2610, 3000, 4110 3-cyl. (1954-83), Replaces: 9N4222 (3.671" O.D.) Industrials: 231, 233, 234, 531, 1801 series, Parts,2030, 2130, 4030 4-cyl., 4040, 4130, 4140 (2 used), Replaces: D5NN4115B, NCA4251B, Rear axle shaft seals 86531244 (2.500" I.D., 3.500" O.D., .438" wide) NOTE: Sold individually. Part # USD Description / Application ABC1562 $11.95 Inner seals Rear Outer Stub Axle Seal fits: 700, 701, ABC382 $17.45 Rear Axle Shaft Inner Oil Seal Pair 900, 901 (1954-62) series fits: 9N, 2N (1939-47) NOTE: This is Replaces: NCB4251A, 87019059 an improved differential seal which (3.548" O.D., 2.500" I.D., 0.438" wide) stops leakage from differential into the brakes. InstallsTractor w/out pulling axle ABC491 $6.99 Rear Axle Shaft Outer Oil Seal fits: 2000, bearing. Slides on the axle & taps into 2600, 2610, 3000, 3600, 3610 (1965-83) place at lip of bearing retainer. Must (All w/ diff. lock), Replaces: C5NN4115B pack the wheel bearing w/ grease when (3.125" I.D., 3.880" O.D., 0.500" wide) using these seals. Sold as a pair. NOTE: 2 used per tractor; ABC196 $11.95 Rear Axle Shaft Inner Oil Seal, Pair Sold individually. fits: 8N, NAA, Jubilee, 501, 600, 601, Gaskets 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. FDS428 $5.99 Rear Axle Shaft Inner Oil Seal Gasket series (Late 1952-64), Replaces: 8N4233A, fits: 8N, NAA, Jubilee (1947-54) C4NN4233A (2.000" I.D., 2.754" O.D., Replaces: 8N4284 0.510" wide) Steiner (1-15/16" I.D., 2-3/16" O.D.) ABC131 $10.59 Inner Rear Axle Seal fits: Dexta, Super USA made NOTE: Rubber. 2 used per Dexta (1957-64), Replaces: 957E4233B, tractor; Sold individually. 81717512 (2.000" I.D., 2.879" O.D., 0.312" FDS431 $3.95 wide) Rear Axle Shaft Outer Oil Seal Retainer to Housing Gasket fits: 8N up to SN: 486752 ABC282 $7.99 Rear Axle Shaft Inner Oil Seal fits: 2000, (1947-mid 52), Replaces: 8N4225 3000, 2600, 2610, 3600, 3610 (1965-83) (3-3/4" I.D., 4-3/8" O.D.) Replaces: C9NN4N109A NOTE: 2 used per tractor; (1.869" I.D., 2.750" O.D., 0.504" wide) Sold individually.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 223 Hydraulic filter Hydraulic lift parts cont... Fits: 2000 3-cyl., 2120, 2150, 2310, 3120, Part # USD Description / Application 3150, 3190, 4000, 4140, 6000; Industrials ABC300 $26.85 Replaces: 86546603 (3.663" top O.D., 5.209" Hydraulic Lift Piston fits: 9N, 2N, 8N height, 1"-12 thread size) USA made (1939-52), Replaces: 9N530B Description Part # USD (2-1/2" dia.) NEW! Hydraulic Filter...... ABC4625...... $12.99 NOTE: See website for all applications. ABC266 $9.95 3-pc. Hydraulic Lift Piston Ring Kit (For ABC300) NOTE: Steel.

Hydraulic lift parts ABC314 $26.85 Hydraulic Lift Piston fits: NAA, Part # USD Description / Application Jubilee (1953-54), Replaces: NAA530B; FDS457 $89.99 Hydraulic Valve Adapter w/ O-Rings, Optional for 9N, 2N, 8N when used w/ Bolts & Instructions fits: Dexta, Major, O-ring (NAA533A), back-up washer 501, 600, 601, 700, 701, 800, 801, 900, 901 (NAA473A) series, 1801, 2000, 2600, 3000, 3600, 4000, ABC315 $1.29 4600, series; Industrials: 230 - 545 (1954- O-Ring (For ABC314) 90) ((2) 3/8" NPT ports) USA made Ford NOTE: Installs between your existing Inc.® hydraulic block off plate on your lift ABC316 $3.29 New Holland New cover to run external hydraulics off the Washer (For ABC314) USA made tractor. FDS4239 $42.50 Hydraulic Lift Cover Block-Off Plate fits: Dexta, Major, 501, 600, 601 700, 701, FDS3354 $23.60 Hydraulic Lift Cylinder Safety Valve 800, 801, 900, 901 series, 1801, 2000, 2600, fits: Dexta, (501, 600, 601, 700, 701, 800, 2610, 3000, 3600, 3610, 4000, 4600, 4610 801, 900, 901, 1801 series), 2000, 2600, series; Industrials: 230 - 545 (1954-90) 2610, 3000, 3600, 3610, (4000 4-cyl.), 4110 Replaces: C5NN475B, 81811978 Parts,(1954-83), 6000 (1961-67); Industrials: 230A (3-7/8" wide x 6-3/8" long) - 530A, Replaces: 957E984B, 81717252 FDS3364 $295.00 (1.597" o/a length, 9/16"-18 thread) Chassis parts (Single FDS4683 $19.99 Spool) NEW! Hydraulic Spring Seat fits: 2N, 8N, 9N, Jubilee, NAA, 600, 601, 700, 701, 800, Double Acting Hydraulic Remote Valve 801, 900, 901, 2000 4-cyl., 4000 4-cyl. (1939- Kit fits: 501, 600, 601 700, 701, 800, 801, 64), Replaces: 9N525B 900, 901 series, 1801, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610 series; FDS273 $44.95 Hydraulic Lift Draft Control Plunger Industrials: 230 - 545 (1954-90) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, FDS3550 $639.99 Replaces: 311877, 290066Tractor 601, 700, 701, 800, 801, 900, 901, 1801, 2000, (Double NOTE: Includes valve, levers, O-rings, 4000 4-cyl. (1939-64), Replaces: 8N541B Spool) hoses, hose bracket & female couplers. NOTE: Fine thread-style. Mounts on lift cover under the seat. FDS4671 $28.95 Will not fit compact tractors. NEW! Draft Control Spring fits: 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta Replaces: 9N547B

FDS4447 $259.99 FDS3403 $4.99 Inner Hydraulic Lift Control Rod Pin fits: 8N, Jubilee, NAA, 501, 600, 601, 700, SteinerNEW! Single Spool Double Acting 701, 800, 801, 900, 901, 2000 4-cyl., 4000 Hydraulic Remote Valve Kit 4-cyl. series (1947-64), Replaces: 374072S, fits: 5000, 5600, 6600, 7000, 7600 (1965-75) 73339S, 73339S-18 (5/16" O.D. x 7/8" length)

ABC299 $71.25 ABC3599 $11.95 Hydraulic Lift Spring Seat Support Hydraulic Lift Cylinder (For 2-1/2" dia. fits: 2N, 8N, 9N, Dexta, Super Dexta, piston) fits: 9N, 2N, 8N (1939-52) Jubilee, NAA, 501, 600, 601, 800, 801, 900, Replaces: 9N510D 901, 2000 4-cyl., 4000 4-cyl. series (1939-64), Replaces: 2N624, 957E624 (0.100" thick)

224 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hydraulic lift parts cont... Hydraulic lift cover repair gasket kits Part # USD Description / Application cont... ABC3602 $15.99 Draft Control Spring Plate w/out Pin Part # USD Application fits: 2N, 8N, 9N, Dexta, Super Dexta, Kits cont... Jubilee, NAA, 501, 600, 601, 800, 801, 900, MFS4590 $1.49 901, 2000 4-cyl., 4000 4-cyl. series (1939- NEW! Hydraulic Lift Cover to Quadrant 64), Replaces: 9N527, NCA527A Gasket only fits: 9N - 4000 4-cyl. (0.250" thick) USA made Replaces: 9N532 FDS242 $29.99 Hydraulic Lift Lever Control Friction FDS3605 $10.65 Plate fits: 9N, 2N, 8N, Jubilee, NAA, 501, Fits: 230A, 231, 233, 234, 333, 334, 335, 600, 601, 800, 801, 900, 901, 2000 4-cyl., (340 up to 4/83), 530A, 531, (2000 3-cyl.), 4000 4-cyl. series (1939-64) 2600, 2610, 3000, 3400, 3500, 3600, 3610, Replaces: 2N516A, 2N516A2 3910, (4110 3-cyl.) (1965-90 w/ 3" O.D. lift cylinder) NOTE: See website for FDS073 $3.50 Throttle Friction Disc fits: Jubilee, NAA, replacement numbers. 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, New Holland 4600, 4610, 5000, 5600, 5610, 6600, 6610, Hydraulic pump parts

7700, 7710, 7910 (1939-91); Industrials: Ford 234 - 545D, 3400 - 4500, Replaces: 9N518, Part # USD Description / Application 83924272 (3" O.D., 1/2" center hole) FDS153 $229.99 Hydraulic PumpInc.® Rebuild Kit fits: 9N, 2N, USA made NOTE: See website for all 8N (1939-52) NOTE: Kit includes (1) base applications. gasket, Replaces: 9N611; (2) chamber ABC317 $7.95 repair kit, Repairs 9N621, 9N622; (2) Chassis parts Quadrant Stop Kit w/ Wing Nut & Flat cam block, Replaces: 9N617A; (2) Washer fits: Ford models (1939-64) except piston, Replaces: 9N615; (1) PTO shaft Majors, Replaces: 9N521 bushing, Replaces: 9N649A; (1) Safety Valve, Replaces: 8N638; (1) sump plug ABC219 $6.99 Hydraulic Lift Oil Level / Dipstick gasket, Replaces: 8N7011; (2) side gasket, fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Parts,Replaces: 9N613; (1) PTO shaft gasket, Replaces: NAA927C Replaces: C5NN747A; (2) side plate FDS416 $17.50 Hydraulic Lift Oil Level / Dipstick gasket, Replaces: 9N4131. fits: 600, 601, 800, 801, 900, 901, 2000 FDS365 $22.50 4-cyl., 4000 4-cyl. series (1954-64) except Hydraulic Pump Control Valve Assembly Grove & Offsets, Replaces: NCA927BC fits: 9N, 2N (1939-47) Replaces: 9N640 Hydraulic lift cover repair gasket kits ABC549 $104.99 Part # USD Application (LH) Kits ABC551 $104.99 Hydraulic Pump Complete Valve Tractor Chamber Assembly fits: 9N, 2N, 8N ABC089 $13.99 Fits: 9N, 2N, 8N (1939-52) (RH) (1939-52) NOTE: Kit includes (2) valve chamber gaskets, (1) lift cover gasket, (1) pump ABC549 Replaces: 9N622 base gasket, (2) inspection cover ABC551 Replaces: 9N621 gasket, (1) cylinder to center housing ABC549 ABC551 cover gasket, (2) hydraulic lift cylinder housing gasket, (1) PTO gasket, (1) FDS353 $18.50 Hydraulic Pump Safety Valve Assembly lift handle quadrant gasket, lift piston fits: 9N, 2N, 8N (1939-52) O-ring & back up washer. Replaces: 8N638, NAA984F ABC091 $3.99 Hydraulic Lift Housing Gasket only FDS2236 $649.99 Hydraulic Pump Assembly w/ Relief ABC090Steiner $9.85 Fits: NAA, Jubilee (1953-54) Valve fits: 8N (1947-52) NOTE: Kit contains (1) lift housing Replaces: 8N605A to rear end gasket, (1) lift cylinder gasket, (1) lift piston O-ring & back up washer, (1) lift handle quadrant gasket, FDS3391 $109.99 Hydraulic Pump Relief Valve Assembly miscellaneous O-rings for lift cylinder. fits: 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. series (1954- ABC431 $11.25 Fits: 501, 600, 700, 800, 900, 1801, 2000, 64), Replaces: NCA638C, 86512642 4000, 4-cyl. series (1954-64) USA made NOTE: Mounts in bottom of rear end housing.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 225 Front mount hydraulic pump drive parts Front mount hydraulic pump drive parts Part # USD Description / Application cont... ABC1809 $45.50 Front Hydraulic Pump Drive Hub Part # USD Description / Application Adapter fits: Some 9N, 2N, 8N (1939-52) FDS3871 $58.50 Front Hydraulic Pump Drive Shaft when equipped w/ ABC021 crankshaft fits the following using 19-338, 19-339, pulley w/ loaders 702, 703 19-419 pump drive: NAA, Jubilee, Golden Replaces: 192161 (3-3/8" O.D., 2-3/8" c.c. Jubilee, 600, 601, 800, 801, (2000 3-cyl. & across bolt holes, 3/4" spline I.D., 4-cyl.), 3000, (4000 3-cyl. & 4-cyl.), 4000SU 6 splines. (4) 1/4" mounting holes, 1.005" w/ 724, 725, 730, 735 loaders (1953-74) thick) NOTE: Measure old pulley bolt Replaces: 290481 (4" O.D. hub, 8-7/8" spacing before ordering. Use with o/a length, 1" O.D. splines, (4) 7/16-14" ABC1820 shaft. threaded holes, 2-3/4" bolt circle) ABC3864 $39.99 Front Hydraulic Pump Drive Hub NOTE: Fits Ford loader pump drive fits: 9N, 2N, 8N (1939-52) (All w/ numbers 19-338, 19-339, 19-419. Dearborn 19-8, 19-8A loaders), Replaces: ABC3867 $39.99 191196 (3" O.D., (4) pins 11/32" O.D. Front Hydraulic Pump Drive Shaft w/ 2-13/32" pin spacing, 5/8" left hand fits: 2000 4-cyl., 2030, 2120, 2130, 4000 threads in center hole) NOTE: Use w/ 4-cyl., 4030, 4120, 4130 (1962-64) (All w/ ABC3894 shaft. 720 Ford loader using 19-251 pump drive Ford ABC1812 $34.50 Front Hydraulic Pump Drive Hub kit), Replaces: 197118Inc.® (8.375" o/a length,

New Holland New Adapter fits: NAA, Jubilee, 600, 800, 2000 1" O.D. w/ 10 splines (1) end, 0.750" 4-cyl., 4000 4-cyl. series w/ loaders 701, O.D. w/ 3/16" x 3/4" keyway (1) end, 10 702, 703, 723, 724, 725 (1953-64) splines) Replaces: 290421, 500934 FDS3755 $34.50 (1" spline I.D., 10 splines, 2-3/4" c.c. bolt Front Hydraulic Pump Drive Shaft holes, 4" o/a dia., 7/16" bolt holes) fits: 335, 601 - 681 series, 801 - 881 series, USA made NOTE: For shaft use 2000 3-cyl. series, 3000, 3400, 3900, 4000 ABC1814. Parts,3-cyl., 4110 3-cyl., 4130 3-cyl., 4140 3-cyl. ABC1820 $39.99 Front Hydraulic Pump Drive Shaft (1957 - 7/80) (All w/ 730 series loader) fits: Some 9N, 2N, 8N (1939-52) using FDS3755: Replaces: 292222

Chassis parts Ford pump drive kits 19-22, 19-23 (7/8"-13 spline O.D. ends, 10.446" o/a FDS3793 $39.99 Replaces: 194354 (13" long, 3/4" O.D., length 1 end is 6 spline & the other end is 0.187 keyway) NOTE: Measure before FDS3793: Replaces: 7701044 ordering. Use w/ ABC1809, ABC021. (7/8"-13 spline O.D. ends, 11-5/8" o/a length) NOTE: Check dimensions before ABC3894 $18.99 Front Hydraulic Pump Drive Shaft ordering as 3 different shafts were used. fits: 9N, 2N, 8N (1939-52) (All w/ Dearborn 19-8, 19-8A loaders), Replaces: FDS3748 $34.50 190760 (13.06" o/a length,Tractor .750" O.D. shaft, Front Hydraulic Pump Drive Shaft 5/8" - 18" LH thread, 0.187" keyway) fits: 420, 515, 601 - 681 series, 801 - 881 NOTE: Use w/ ABC3864 drive hub. series, 2000 3-cyl. series, 3000, 3400, 3500, 3550, 3900, 4000 3-cyl., 4110 3-cyl., 4130 ABC1814 $49.99 Front Hydraulic Pump Drive Shaft 3-cyl., 4140 3-cyl., 4400 (1957 - 7/80) fits: NAA, Jubilee, 600, 800, 2000 4-cyl., (All w/ 730 or 735 series loader) 4000 4-cyl. series w/ loaders 701, 702, 703, Replaces: 291951 (7/8"-13 spline O.D. 723 (1953-64), Replaces: 195454 ends, 13-5/8" o/a length) (9-3/8" length, pulley end = 1" O.D. x 10 NOTE: Check dimensions before splines, pump end = 3/4" O.D. w/ 3/16" ordering as 3 different shafts were used. x 3/4" keyway) NOTE: Measure before Steinerordering. Use w/ ABC1812. FDS3759 $31.55 Front Hydraulic Pump Drive Flange ABC3860 $24.99 Front Hydraulic Pump Drive Shaft fits: 335, 601 - 681 series, 801 - 881 series, fits: Jubilee, NAA, 600, 601, 800, 801, 2000 2000 3-cyl. series, 3000, 3400, 3900, 4000 4-cyl., 4000 4-cyl. (1953-64) 3-cyl., 4110 3-cyl., 4130 3-cyl., 4140 3-cyl. Replaces: 194355 (9-3/16" long (one end (1957 - 7/80) (All w/ 730 series loader) is 3/4" O.D. 6 splines & one end is 3/4" Replaces: L78-13, L78-13GV O.D. w/ 3/16" x 3/4" keyway) NOTE: Fits (7/8" - 13 spline, 5/16" O.D. bolt holes, Dearborn and Ford Loader pump drive 2-1/4" on center) NOTE: Can be used #'s 19-21, 19-42, 19-60, 19-61, 19-70, 19-71, on other applications using 352 series 701 series, 702 series, 703 series. Morflex couplers.

226 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Vane pump parts Piston pump, parts cont... The following piston pump parts fit Some NAA, Jubilee, 501, Part # USD Description / Application 600, 601, 700, 701, 800, 801, 900, 901 series, 1801, 2000, 4000, FDS239 $399.00 Vickers Hydraulic Vane Pump Rotor Kit 4-cyl. series (1953 - 64 - unless otherwised noted) fits: Some NAA, Jubilee, Golden Jubilee Part # USD Description / Application (1953-54) (All using square vane style FDS074 $369.95 Hydraulic Piston Type Pump Manifold hydraulic pump w/ 5/8" wide vanes) (Lines) (Piston type pump a.k.a. round Replaces: CPN981A (5/8" wide vanes) pump) w/ O-rings fits: NAA, Jubilee, USA made Golden Jubilee (1953-54) FDS240 $399.00 Vickers Hydraulic Vane Pump Rotor Kit Replaces: NAA876A USA made fits: Some 600, 700, 800, 900 (1954-55) FDS3017 $57.99 Hydraulic Vane to Piston Pump (All up to SN: 66849 & using square vane Changeover Plate w/ (4) O-rings pump w/ 3/4" wide vanes) fits: NAA, Jubilee, Golden Jubilee Replaces: CPN972C (1953-54); Serviceable for NAA876A (3/4" wide vanes) USA made NOTE: See website for instructions. FDS3659 $94.50 Vickers Hydraulic Vane Pump Shaft w/ FDS4277 $4.99 New Holland Drive Key fits: NAA, Jubilee, Golden 6-pc. Pump Manifold O-Ring Kit Jubilee (1953-54) (All w/ square vane fits: NAA - 4000 4-cyl. (1953-64) Ford hydraulic pump), Replaces: EAF966A, USA made 356961S (drive key) (4.035" o/a length, Inc.® FDS1262 $197.50 Hydraulic Piston Pump Gear Housing 0.452" spline O.D.) USA made (For NCA600C or NCA600F pump) FDS3394 $99.95 Vickers Hydraulic Vane Pump Shaft w/ Replaces: NCA905C USA made Chassis parts Drive Key fits: 600, 620, 630, 640, 650, 660, NOTE: Will fit pumps w/ tapered 700, 740, 800, 820, 840, 850, 860, 900, 940, bearing style pump shaft not roller 950, 960 (All up to SN: 66849 using the bearing style pump shafts (NAA600C, square vane hydraulic pump) (1954-55) NCA600E). Replaces: NCA966A (shaft), 356961-S ABC156 $69.99 Hydraulic Piston Pump Repair Kit (key) (4.442" long, 0.601" O.D. keyed end, Parts,w/ Plate Assy. & Seal, Replaces: 0.450" O.D. spline end) USA made CCPN600A, CCPN600B (Services FDS3426 $94.50 Vickers Hydraulic Vane Pump Pressure 1953 - 1964 4-cyl. gas, diesel models Plate fits: Same as FDS3394 using piston type pump NCA600C & Replaces: NCA969B NCA600F) NOTE: Piston type pump (2.440" across, 0.797" tall) USA made has replaced vane type pump in many NOTE: Manganese phosphate coating. early models. ABC3399 $15.99 Vickers Hydraulic Vane Pump Shaft Oil FDS2855 $66.50 Hydraulic Piston Pump Valve Seat Seal fits: Same as FDS3394 Removal Tool; Also fits 6000 series using Replaces: AD33623A piston type hydraulic pump (0.968" I.D., 1.690" O.D., 0.313" wide) Replaces: FNH01306 USA made Tractor NOTE: See website for additional ABC3000 $8.99 Vickers Hydraulic Vane Pump Outer applications. Bearing fits: NAA - 900 series (1954-55) w/ vane hydraulic pump, Replaces: FDS2857 $39.99 Hydraulic Piston Pump Valve Seat EAF970A (0.787" I.D., 1.850" O.D., 0.551" Installation Tool; Also fits 6000 series wide) NOTE: Sealed bearing. using piston type hydraulic pump Replaces: FNH01305 USA made

FDS438 $13.99 O-Ring & Gasket Kit USA made Piston pump, parts NOTE: Kit includes (2) different The following piston pump parts fit Some NAA, Jubilee, 501, main pump body gaskets, (1) pump 600, 601,Steiner 700, 701, 800, 801, 900, 901 series, 1801, 2000, 4000, mount gaskets, (1) pump body o-ring, 4-cyl. series (1953 - 64 - unless otherwised noted) (4) pump manifold O-ring, (1) tach drive gasket. Includes the hydraulic Part # USD Description / Application manifold O-rings & quad rings for FDS1919 $1,249.95 Piston Hydraulic Pump, Replaces: the Jubilee, NAA in addition to the NAA600D, NCA600C, NCA600F O-rings for the later style aluminum USA made NOTE: FDS1919 can hydraulic manifold. This is a Steiner replace vane style pump w/ purchase exclusive & the only comprehensive of FDS074 piston hydraulic manifold kit on the market! lines. Piston pump, parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 227 Piston pump, parts cont... Piston pump, parts cont... The following piston pump parts fit Some NAA, Jubilee, 501, The following piston pump parts fit Some NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901 series, 1801, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901 series, 1801, 2000, 4000, 4-cyl. series (1953 - 64 - unless otherwised noted) 4-cyl. series (1953 - 64 - unless otherwised noted)

Part # USD Description / Application Part # USD Description / Application FDS4596 $1.35 NEW! Hydraulic Pump Piston Spring FDS437 $9.99 Hydraulic Piston Pump Shaft Bearing fits: 600 - 4000 4-cyl (For NCA600C or NCA600F pump) Replaces: NCA861B Replaces: 8A-1201C, D5NN1201A NOTE: Will fit pumps w/ tapered FDS4282 $1.99 Hydraulic Pump to Engine Mounting bearing style pump shaft not roller Gasket fits: NAA - 4000 4-cyl. (1953-64) bearing style pump shafts (NAA600C, Replaces: EAF911B USA made NCA600E). NOTE: Fits vane & piston pump. FDS439 $5.49 Hydraulic Piston Pump Shaft Cup FDS333 $64.95 Hydraulic Piston Pump Shaft (For NCA600C or NCA600F pump) Replaces: EC0N966A, NCA966E Replaces: 8A1202B, D5NN1202A NOTE: Will fit pumps w/ tapered NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shaft not roller bearing style pump shafts (NAA600C, bearing style pump shafts (NAA600C, NCA600E). NCA600E). Ford FDS4244 $64.99 Hydraulic Piston Pump Wobble Plate FDS334 $33.50 Inc.® Thrust Roller Bearing fits: Jubilee, NAA, New Holland New Hydraulic Piston Pump Main Drive 501, 600, 601, 700, 701, 800, 801, 900, 901, Gear 2000, 2031, 2100, 2150, 2300, 2310, 2600, Replaces: C3NN908A 2610, 3000, 3150, 3190, 3300, 3310, 3600, 3610, 4000, 4000SU, 4031, 4100, 4110, 4120, 4121, 4131, 4140, 4190, 4200, 4330, ABC200 $11.99 4340, 4410, 4600, 4600SU, 4610, 6000; Needle Bearing Assembly (For Piston Industrials: 230A - 545, 1801 - 4130 pump drive gear housing) Replaces: NCA858A, C0NN858A Parts,Replaces: NCA881A, 36433 (2.709" O.D.) USA made NOTE: Fits all w/ engine mounted piston type ABC201 $9.99 Hydraulic Piston Pump Shaft Seal Chassis parts hydraulic pump (1953 - 4/83). See Also fits 2000, 3000, 4000 series (1965 - website for additional applications. 4/83) (All w/ engine mounted pump) Replaces: C5NN851A, Will replace FDS4251 $52.75 Piston Pump Wobble Plate fits: Same NCA851A, D8NN851AA as FDS4244, Replaces: C0NN859A, (1.000" I.D., 2.004" O.D., 0.531" W) NCA859A, 81802065 USA made NOTE: Fits all w/ engine mounted The following parts will not fit 1964 & earlier pumps. piston type hydraulic pump (1953 Fits 1965 & up only: - 4/83). See website for additional FDS3452 $29.99 Piston Hydraulic Pump Repair Kit applications. Tractor fits: 2000 3-cyl., 2600, 2610, 3000, 3600, FDS4260 $13.99 Hydraulic Pump Piston fits: Same as 3610 (All w/ or w/out independent FDS4244, Replaces: NCA615C, 81801696 PTO); 4000 3-cyl., 4600, 4610 (All w/out (5/8" O.D.) USA made NOTE: Measure independent PTO); Industrials: 230A, piston O.D. on 1965 & up models 231, 233, 333, 335, 340A, 420, 445, 515, before ordering. Fits all w/ engine 530A, 531, 532, 535, 540, 540A, 545, 3400, mounted piston type hydraulic pump 3500, 3550, 4400, 4500 (All w/ engine (1953 - 4/83). See website for additional mounted cast iron body hydraulic applications. piston pump) (1965 - 4/83) NOTE: Will not fit 1964 & earlier pumps. FDS4256 $12.59 Hydraulic Pump Piston fits: Some 2000 FDS3714 $14.95 Steiner3-cyl., 2600, 3000, 3600, 3600V, 4000 Piston Hydraulic Pump Pressure Tube 3-cyl., 4000SU, 4200, 4600, 4600SU; Nut Assembly fits: 2000 3-cyl., 3000, Industrials: 231, 233, 333, 335, 3400, 3400, 3500, 3550, 4000 3-cyl., 4400, 4500 3500, 3550, 420, 515, 531, 532, 535, (1965 - 12/74) (All w/ engine mounted 540, 4400, 4500 (All using 9/16" O.D. cast iron hydraulic piston pump) pistons w/ engine mounted piston type Replaces: C7NNH856C, 81821215, hydraulic pump 1965-4/83), Replaces: 291320 (For 1/2" pressure line) C5NN615A, C0NN882B, 81801695 USA made NOTE: Will not fit 1964 & USA made NOTE: Measure piston earlier pumps. 2 used per tractor; O.D. before ordering. Sold individually.

228 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm PTO shaft assys. (1-3/8") PTO parts cont... NOTE: The PTO assemblies replace & Part # USD Description / Application convert 1-1/8" shaft to 1-3/8" spline. ABC1543 $14.99 PTO shaft is assembled with oil seal, Select-O-Speed Inner Front Single Speed bearing, housing, cap, bearing retainer ring PTO Shaft Seal fits: 611, 671, 771, 811, 871, & gasket. 971, 1811, 1871; 2000, 3000, 4000 (1959-74) Part # USD Application Replaces: 313734 (1.375" I.D., 2.378" O.D., 0.312" wide) FDS216 $179.95 Fits: 9N, 2N, 8N (1939-52) Replaces: 9N70038 ABC282 $7.99 (1-3/8" splines, 30-7/8" long) Select-O-Speed Outer Two Speed PTO FDS217 $179.95 Fits: NAA, Jubilee (1953-54) Shaft Seal fits: 681, 881, 981, 1881, 2000 Replaces: NAA70038 3-cyl. - 4000 3-cyl. (1959-74) (1-3/8", 30-3/16" long) Replaces: 313245, 81809512 (1.869" I.D., 2.750" O.D., 0.504" wide) FDS218 $139.95 Fits: 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. series (1954-64) ABC1501 $10.95

except Select-O-Speed models PTO Input Shaft Seal fits: 5000, 5600, New Holland Replaces: NCA70038, 310084 5610, 6600, 6610, 6700, 6710, 7000, 7600, (1-3/8", 32-11/16" long) 7610, 7700, 7710, 8000, 8600, 8700, 9000, Ford 9600, 9700 (1965-90) (All w/ 7 or 8 speed transmission), Inc.®Replaces: C5NN799A (1.125" I.D., 1.565" O.D., 0.250" wide) PTO parts ABC3437 $5.20 Chassis parts Part # USD Description / Application Bearing, Replaces: 9N715B, SBA040106206, ABC085 $4.75 210064 (1.181" I.D., 2.440" O.D., 0.629" PTO Knob fits: Major Diesel, Power Major, wide) NOTE: Bearing is not sealed. Super Major (1952-64), Replaces: EBB7213 See website for all applications. (1.985" dia., 3/8"-24 NF) NOTE: Bakelite. Parts,ABC3437 Applications:

ABC313 $1.00 Outer PTO Shaft Bearing fits: 9N - NAA, 600, 800 w/ 1-1/8" PTO Cover Gasket (For 1-1/8" & 1-3/8" PTO only (1939-56) PTO) fits: All Ford models (1939-64) except PTO Shifter Support Housing Bearing fits: 9N - NAA, 501, Majors; also fits 2000, 3000 (both w/ 4 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. w/ 3 or 4 speed transmission) (1965 - 12/70) speed transmission (1939-64) Replaces: C5NN747A USA made Upper PTO Countershaft Bearing fits: 1300, 1310, 1320, ABC086 $10.95 1500, 1510, 1520 HST, 1600, 1620, 1630, 1710, 1715, 1725, 1925 PTO Shaft Cover Cap fits: 501- 3610 (1957- (1976-98) 4/83), but will not fit 2910; Serviceable for FDS015 $49.95 9N - 900 (1939-56), Replaces:Tractor 310088 NOTE: Aluminum alloy. PTO Shifter Support Housing fits: 600, 800, 900, 2000, 4000 4-cyl. series (1954-64) w/ 5 ABC566 $25.99 PTO Cap (For 1-1/8" & 1-3/8" PTO) speed transmission, Replaces: NDA770B fits: 9N, 2N, 8N, NAA, Jubilee, 501, USA made NOTE: Close out. 600, 700, 800, 900, (1939-56); Serviceable for 1957-64 models, Replaces: 2N726, NCA726A (3-1/2" o/a length, 2-5/8" MIS118 $64.99 thread) NOTE: Cast iron. Original style. PTO Over-Running Clutch (1-1/8" Female) ABC140 $8.95 PTO Oil Seal, Double Lip fits: 9N, 2N fits: Tractors up to 75 horsepower Steinerwhen using late PTO; 8N, NAA, Jubilee, Replaces: Hub City C670F 501, 600, 700, 800, 900, 1801, 2000, 3000, (1-1/8" - 6 x 1-3/8", 6 spline) 3550, 4000, 2600, 3600, 4100, 4600, 2610, 3610, 4110, 4610 (1943-89) MIS138 $62.95 Replaces: 9N703B, 83944079 (1.565" I.D., 2.445" O.D., 0.630" wide) PTO Over-Running Clutch (1-3/8" Female NOTE: For 1-1/8" when not held by a & Male) fits: Tractors up to 75 horsepower spring loaded sleeve & pin to the shaft & Replaces: Hub City C660F 1-3/8" PTO shafts. Seal may be narrower (1-3/8" - 6 x 1-3/8", 6 spline) than original, but works fine.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 229 Front wheel hardware Front hub, parts cont... NOTE: Sold individually. Part # USD Description / Application Part # USD Description / Application FDS1787 $26.99 Front Wheel Bearing Kit fits the MFS1584 $2.99 Front Wheel Lug Nut fits: 8N (1947-52) following w/ NCA1104A hub: 600, 700, w/ 1-1/16" hex lug nut & 19" rim 800, 900 series (All up to SN: 137817) Replaces: S9512A (1/2"-20 NF) (1954-mid 1957), Replaces: CBPN1200B NOTE: 12 used per tractor; (1.250" inner bearing I.D.) NOTE: 2 used Sold individually. per tractor; Sold individually.

FDS287 $1.29 Front Wheel Lug Nut Serviceable for 9N FDS1791 $21.50 Front Wheel Bearing Kit fits the - TW30 (1939-83), Replaces: C5NN1012B following w/ NCA1104B, NCA1106B (1/2" - 20 NF, 13/16" hex head) hub: 501 - 4000 (All SN: 137818 & up) w/ regular axle NOT H.D. axle) (1957-64) FDS368 $7.59 Front Wheel Lug Nut fits: 9N, 2N (1939- Replaces: CBPN1200C (1.781" O.D. outer 47), Replaces: 9N1012 race) USA made NOTE: 2 used per (1/2" - 20 NF, 11/16" hex head) tractor; Sold individually. USA made NOTE: 10 used per tractor; FDS3848 $13.99 Front Wheel Bearing Kit fits the following Sold individually. using front hub C5NN1104B, C9NN1104F FDS288 $5.99 Front Wheel Stud Assembly w/ Nut w/ SN: 137818 & up: 501 - 901, 2000 4-cyl., fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 4000 4-cyl. (All w/ regular axle not H.D. Ford 900 series (1947-56); Serviceable for 9N, axle), Dexta, SuperInc.® Dexta (1961-64); Also

New Holland New 2N (1939-47) (.559" shoulder dia.) fits 2000 3-cyl., 2600, 2610, 3000, 3600, NOTE: Stud (1/2" - 20 NF) is exact of 3610, 3900, Industrials: 233, 234, 333, original. 335 (1965-4/83) , Replaces: EHPN1200E FDS286 $4.49 Front Wheel Stud only fits: 9N, 2N, 8N, (1.782" outer race O.D., 2.329" inner race NAA, Jubilee, 501, 600, 700, 800, 900 series O.D.) NOTE: ABC1310 seal needs to be (1939-56), Replaces: C5NN1107E ordered for tractors 1961-64. Measure NOTE: Stud (1/2" - 20 NF) is exact of inner race or verify front hub number original. before ordering. See website for all Parts,applications. ABC268 $2.99 Front Wheel Stud only fits: 501 - 981, 2000 - TW30, Dexta (All w/ 2 wheel drive FDS3852 $15.99 Front Wheel Bearing Kit fits the

Chassis parts & regular front hub) (1957-83) following w/ SN: 11978 & up & H.D. Replaces: C5NN1107F axle using front hub C9NN1104A, (1/2" - 20 NF x 1-3/4" w/ serrated C9NN1104E, C9NN1104H: 601 - 881, shoulder, 1.747" useable length) (2000 3 & 4-cyl.), 2310, 2610, 2810, 2910, NOTE: 6 used per rim; 3230, 3430, 3910, 3930, (4000 3 & 4-cyl.), Sold individually. 4610 w/ H.D. axle, 4100, (4110 3-cyl.), ABC254 $21.99 Front Wheel Clamp Lock Nut (4130 3-cyl.), 4190, 4600, 4600SU, 4630, (For Axle Shaft & Front Wheel) 4830, 5030, (6000 w/ C0NN1104D fits: 9N - 6000 (1939-67)Tractor (3/4"-16 NF hub, but must order ABC1310 seal); thread) NOTE: No re-threading Industrials: 230A, 234, 334, 335, 530A necessary on worn shafts. Check size (1957-97), Replaces: E2155T9, before ordering. EHPN1200C (Outer race = 1.781" O.D. Inner race = 2.563" O.D. Outer bearing = 0.749" I.D. Inner bearing = 1.374" I.D.) Front hub, parts USA made ABC1310 $5.99 Part # USD Description / Application Front Wheel Bearing Seal fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000 FDS285 $59.99 4-cyl., 4000 4-cyl. series (1939-64), 6000 (1961-67), Replaces: NCA1190A, 9N1190B SteinerFront Wheel Hub fits: 8N, NAA, Jubilee (1.985" I.D., 2.684" O.D., 0.322" wide) (1947-54), Replaces: 8N1104, NCA1104C NOTE: 2 used per tractor; Sold individually. ABC4298 $4.49 FDS295 $29.99 Front Wheel Bearing Kit fits: 9N, 2N, 8N, NEW! Front Wheel Bearing Seal NAA, Jubilee (1939-54) fits: Dexta, Super Dexta (1957-64); 2000 Replaces: CBPN1200A 3-cyl., 2600, 2610, 3000, 3600, 3610, 3900; (1.189" inner bearing I.D.) Industrial: 233, 234, 333, 334, 335 NOTE: Fits hub 8N1104. 2 used per (1965-4/83), Replaces: 957E1190A tractor; Sold individually. (1.693" I.D., 2.756" O.D., 0.512" wide)

230 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Front hub, parts cont... Front wheels / rims cont... Part # USD Description / Application Part # USD Description / Application ABC553 $10.95 Front Hub Cap only fits: 9N, 2N, 8N, WHS042 $79.99 NAA, 501, 600, 700, 800, 900, 2000 4-cyl., Front Wheel (6 Lug) w/ (4) Wheel Weight 4000 4-cyl. series, Dexta, Super Dexta Holes fits: Some 3230 - 7710, others (1939-64) (All w/ regular front axle not Replaces: 82006576, C5NN1007D H.D. axle), Replaces: 2N1139B, 957E1139 (6" x 15", 4.625" pilot hole, 6" bolt circle, (2"-24 thread size, 1.670" tall) 4-3/4" back spacing) USA made NOTE: Stamped steel. Exact of original. NOTE: For 6.00, 7.50 x 15" tires.

WHS070 $89.99 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Ford models Replaces: 820050054, 86402377, D6NN1007B (8" x 15", 4.625" pilot hole, 6" bolt circle, 4-3/4" back spacing)

USA made NOTE: For 7.50 - 9.5L x 15" New Holland tires. Ford What is back spacing? WHS022 $76.50 To determine back spacing lay your wheel flat on the Front Wheel (6Inc.® Lug) w/ (4) Wheel Weight ground with the back of the wheel facing up. Lay a straight Holes fits: 8N - 7910 series (1947-91)

edge across the wheel & measure the distance from the Replaces: 8N1015D, 82006575, 87389515 Chassis parts back side of the mounting surface to the straight edge. (4.5" x 16", 4.625" pilot hole, 6" bolt circle, USA made (I.E. The wheel pictured has a back spacing of 3-5/8"). 4" back spacing) NOTE: For 5.50, 6.00 x 16" tires.

WHS043 $84.50 Front wheels / rims Parts,Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 2310 - 9700, others NOTE: To determine the width of Rims / Wheels: Measure Replaces: 82005056, C5NN1007A the inside (bead to bead) not outside to outside. See page (6" x 16", 4.625" pilot hole, 6" bolt circle, 392B. 4-3/4" back spacing) USA made Part # USD Description / Application NOTE: For 6.50 - 7.50 x 16" tires. FDS071 $59.99

Front Rim (Blank) fits: 9N, 2N, 8N (1939- 52) (3" x 19"; 17-3/8" I.D.) USA made NOTE: Remove center from old rim & Inner tube valves, nut weld into new blankTractor rim. For 4.00 x 19" Part # USD Description / Application tires. ABC531 $5.99

Rear Tire Inner Tube Valve (Air / Water FDS220 $99.99 Valve) (New Style) fits: Tractor tubes w/ Internal threads Front Wheel (5 Bolt) w/ Large 9-5/8" Pilot Hole fits: 9N, 2N (1939-47) Replaces: 9N1015A (3" x 19") ABC384 $10.69 NOTE: For 4.00 x 19" tires. Rear Tire Inner Tube Valve (Air / Water Steiner Valve) (Old style) fits: Tractor tubes w/ External threads FDS221 $99.99

Front Wheel (6 Bolt) w/ 4.625" pilot hole ABC385 $1.79 fits: 8N (1947-52) Replaces: 8N1015A, C5NN1015A (3" x 19") NOTE: For 4.00 x 19" tires. Brass Nut (For Rear Tire Inner Tube Valve)

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 231 Tires, tubes Tubes are for BIAS ply tires only, not for radial tires. Also not for recreational use. Need a tire or tube that is not listed? Call our technical service department. Tires, tubes, valves, nut are sold individually.

Part # USD Description / Size Front tires - Licensed by WHS047 $96.95 Triple rib, 6 ply, Tire only (5.50 x 16") Firestone® USA made WHS048 $104.95 Triple rib, 4 ply, Tire only (6.00 x 16") Part # USD Description / Size WHS049 $115.50 Triple rib, 6 ply, Tire only (6.50 x 16") FDS056TI $149.99 Single rib, 4 ply, WHS050 $16.99 Tube only (For 5.50, 6.00, 6.50 x 16" Tires) Tire only (4.00 x 19") WHS054 $149.99 FDS089 $72.50 Multi rib, 4 ply, Tire (4 x 19") Triple rib, 4 ply, Tire only (5.00 x 15") FDS056TU $16.99 Tube only (For FDS056TI & FDS089 Tire) WHS055 $176.75 Triple rib, 6 ply, WHS060 $39.99 Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires) Tire only (6.00 x 16") WHS059 $54.99 Rear Tube only (For 11.2, 12.4 x 24" Tires) WHS056 $309.99 Triple rib, 6 ply, WHS058 $57.99 Rear Tube only (For 11.2, 12.4 x 28" Tires) Tire only (7.50 x 18") Ford WHS061 $85.00 Rear Tube only (For 13.6, 14.9 x 28" Tires) Inc.® New Holland New WHS062 $62.50 Rear Tube only (For 9.5 x 32" Tires) WHS063 $68.99 Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires) WHS064 $67.50 Rear Tube only (For 11.2, 12.4 x 38" Tires) WHS2513 $92.99 Rear Tube only (For 12.00, 13.00, 13.6, 14.00, 14.9, 15.5 x 38" Tires) Parts,

FDS056TI, WHS054, WHS055, WHS056 Firestone detail Chassis parts Rear rim hardware Rear rim hardware cont... NOTE: Sold individually. Part # USD Description / Application Part # USD Description / Application MIS063 $4.99 Rear Rim Bolt Assembly w/ Nut FDS1201 $7.59 (For tractors w/ stamped steel center Fits: 9N, 2N (1939-47) (Stud) dishes) fits: 28" Rear Rims (1939-90) - FDS1201: Replaces: 9N1117 WHS004, WHS012, WHS013, WHS016 (5/8"-18 NF, 1.875" o/a length) applications, Replaces: 370938S36 (5/8 x NOTE: 12 required per tractor; Tractor 18 NF x 2-1/2" Carriage bolt) USA made Sold individually. NOTE: 6 used per rim; Sold individually. FDS1211 $1.45 FDS1211: Replaces: 33806S7, 81871950 MIS121 $0.89 Flat Washer only (For MIS063) (Nut) (5/8"-18 NF ) USA made Replaces: 370692S36 (5/8" I.D.) NOTE: 12 required per tractor; NOTE: Can also be used behind the lug Sold individually. nut on 9N, 2N. 6 used per rim; Sold individually. FDS394 $2.59 Rear Lug Stud fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. (1947-64), Replaces: 312696 Rear rims / wheels - USA made (5/8"-18 NF, 1-5/8" o/a length) Steiner NOTE: To determine the width of Rims / Wheels: Measure USA made NOTE: 16 used per tractor; Sold individually. the inside (bead to bead) not outside to outside. See pg. 392B. Part # USD Description / Application ABC386 $1.75 Rear Lug Nut fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2600, 2610, WHS1613 $279.99 Flat Base Rear Rim (Blank 2810, 2910, 3000, 3610, 3910, 4000 4-cyl., Center) (For stamped steel 9 bolt 4110 (1947-83), Replaces: 8N1134 pattern rims) fits: Ford models (5/8"-18 NF) USA made NOTE: 16 used (10" x 38") NOTE: Bare finish. per tractor; Sold individually. For 2600 & Customer must reuse old center. up check thread size. Must weld or rivet.

232 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Rear rims / wheels - USA made cont... Rear spinout rims, parts cont... Part # USD Description / Application Part # USD Description / Application WHS016 $154.99 MIS108 $17.99 Rear Spinout Rim Stop (For 90 degree (9" x 28") Drilled Rim Rail) fits: Some 4000 3-cyl. - WHS004 $175.50 Rear Rim (6 Loops) fits: Some 9N - 3610 9700, TS90 - TS115 (1965-2003) (10" x 28") series & others (1939-90) Replaces: E5NN1057BA USA made WHS016 Replaces: NCA1020C, WHS012 $179.95 NOTE: Will not fit the rims that we sell. D9NN1050BA (11" x 28") MIS110 $9.85 Stop Bolt (For Rear Spinout Rim Stops) WHS004 Replaces: NCA1020B, WHS013 $249.50 fits: 2000 3-cyl.- 4830 (1965-94) CONN1050F (12" x 28") Replaces: C0NN1058A, 81811263 WHS012 Replaces: C5NN1050E (2-5/8" o/a length) NOTE: Sold WHS013 Replaces: D9NN1050EA individually. NOTE: Back spacing on loops = 3-1/2" & 7-3/4".

Rear wheel flange nut Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, New Holland

900, 2000, 4000 4-cyl. series (1947-64), 3000 Ford (1965-74), Replaces: 8N1132A2 Rear spinout rims, parts (1-1/16" hex, 5/8"-18Inc.® UNF x 2.650) NOTE: Stop holes are angled. Description Part # USD Rear Wheel Flange Nut...... FDS118...... $11.99 Chassis parts Part # USD Description / Application NOTE: Used to add pie weight plate or to "Direct Dual." WHS007 $453.00 Rear Spinout Rim (4 Rails) (12" x 26") fits: Ford models (1965-90) WHS007 Replaces: C5NN1050H Mounting wedge ACS028 $494.95 ACS028 Replaces: C5NN1050H Fits: 8N, NAA, Jubilee, 501; (11" x 28") USA made NOTE: These are not PAD Parts,600, 700, 800, 900, 2000, 3000 (1947-74) style rims. (All w/ conventional 6-loop rims not spin ACS026 $494.50 Rear Spinout Rim (4 Rails) fits: Some out rims) (12" x 28") 2000 3-cyl. - 4110 series, others (1965-90) Description Part # USD Replaces: C5NN1050J USA made Mounting Wedge (For Rear 3-pc. Weight)...... FDS150...... $10.00 NOTE: 6 needed per wheel; Sold individually. Close out. WHS008 $504.95 Rear Spinout Rim (4 Rails) fits: Some (13" x 28") 2000 3-cyl. - 4110 series (1965-90) USA made NOTE: Stop holes are angled. Rails are drilled for both style 3-point hitch parts stops (1 rail for MIS109 & 1 rail for Part # USD Description / Application MIS108). FDS023 $24.99 Tractor Top-Link (Category 1), Adjustable w/ ABC3865 $14.95 1-Bolt Spin-out Rim Clamp (Bridle) forged ends & 3/4" hole fits: Ford models fits the following 10/1968-2007: 2000 (16" tube length) 3-cyl., 2600, 2610, 2910, 3000, 3430, 3600, 3610, 3910, 3930, 4100, (4110 3-cyl.), 4130, FDS346 $41.55 Top-Link (Category 2), Adjustable w/ (4140 3-cyl.), 4600SU, 4610SU, 4630, forged ends & 1" hole fits: Ford models 4830, (5640, 6640, 7740, 7840 all w/ 38" (16-3/4" tube length) tire), (8210 3/1989-91), 8240, (8340 w/ 38" tire), 8530, 8630, 8700, 8730, 8830, ABC4185 $2.49 9700, (TW5 - TW35); New Holland: Top Link Reducer Bushing TL80, TL90, TM140, TM155, 5635, 6635, fits: Ford models w/ a Category 2 top link Steiner switching to a Category 1 top link pin 7635, 8260, 8560. (All using 1 bolt spin- out rim clamps), Replaces: C7NN1043E, (.750" I.D., 1.000" O.D., 1-15/16" length) E5NN1043AA, 5106352, 83954711 FDS159 $44.95 Top-Link Bracket (Hydraulic Lift Rocker) (3.860" o/a height, 3.353" o/a width, fits: (Serviceable for 2N, 9N), 8N, NAA, .935" hole dia.) Jubilee, 600, 800, 2000, 4000 4-cyl. (1939- MIS109 $15.85 Rear Spinout Rim Stop (For Parallel 64), Replaces: NCA535A Drilled Rim Rail) fits: 2000 3-cyl. - 4830 NOTE: Drilled for a 1" pivot pin. (1965-94), Replaces: C0NN1057A Measure pivot pin before ordering. NOTE: Use MIS109 for our spinout rims. 3-point hitch parts continue on next page

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 233 3-point hitch parts cont... 3-point hitch parts cont... Part # USD Description / Application Part # USD Description / Application ABC1431 $2.49 3-Point Top Link Pin (Category 1) FDS383 $99.99 3-Point Lower Lift Arm fits: 501, 600, 700, (3/4" O.D., 2-3/4" usable length, (LH) 800, 900, 1801, 2000 (3 & 4-cyl.), 2600, 4-5/8" o/a length) FDS386 $99.99 2610, 3000, 3600, 3610, (4000 4-cyl. series) ABC1427 $3.99 3-Point Top Link Pin (Category 1) (RH) (1954-90) (3/4" O.D., 4-3/4" usable length, FDS383 Replaces: D0NN555C 6-1/2" o/a length) FDS386 Replaces: D0NN555D (Category 1 - accommodates 7/8" ABC1429 $4.99 3-Point Top Link Pin (Category 2) drawbar or lower link pins, 31-5/8" c.c. (1" O.D., 4-1/4" usable length, ball) NOTE: Offset tractors must drill 6" o/a length) hole for sway chain. MIS119 $1.09 3-Point Lynch Pin fits: Ford models FDS2059 $1.75 equipped w/ a 3-point hitch using a .420" Lower 3-Point Pin Support Plate Gasket dia. pin, Replaces: 87299410 fits: 9N SN: 6019 & up, 2N (mid 1939-47) (1-1/2" usable length) Replaces: 9N523B USA made FDS475 $74.95 NOTE: Mounts under axle housing. Outer Hydraulic Lift Rockshaft Arm 2 used per tractor; Sold individually. fits: 9N - Jubilee; Serviceable for 501 - 4000 4-cyl. (1939-64), Replaces: 9N543B FDS465 $31.50 Ford (1.80" I.D., 37 splines) Inc.® 3-Point Lower Lift Arm Support Pin w/ New Holland New FDS028 $84.99 Nut, Washer, Cotter Key fits: 9N, 2N 3-Point Leveling Box Assembly fits: 9N, (1939-47), Replaces: 9N563 2N, 8N, NAA, Jubilee (1939-54), Dexta, Super Dexta (1957-64), Replaces: 8N577A (Closed length = 17-1/2" - top pin to FDS462 $24.95 3-Point Lower Lift Arm Support Pin bottom pin) fits: 8N, NAA, 501, 600, 700, 800, 900, 1801, (2000 3 & 4-cyl.), 2600, 2610, 3000, FDS367 $29.99 Fork (For FDS028) fits: 9N, 2N, 8N, NAA, Parts,3600, (4000 3 & 4-cyl.), 4600 (1947-83) Jubilee (1939-54), Dexta, Super Dexta (All w/out differential lock) (1957-64), Replaces: 9N585A Replaces: NCA563C (5.070" length)

Chassis parts (10-1/2" o/a length, 3/4" UNC thread, NOTE: For Category 1 3-pt. arms. 1/2" between ears) FDS219 $52.50 LH Leveling Rod fits: 9N, 2N, 8N, NAA, Jubilee (1939-54), Dexta, Super Dexta Drawbars, parts (1957-64), Replaces: 9N564B Part # USD Description / Application (20" c.c. pin holes) FDS208 $135.00 Swinging Drawbar Assembly w/ Hanger/ FDS392 $104.50 Bracket, Clevis Assembly fits: 9N, 2N, 8N, 3-Point Leveling Box AssemblyTractor fits: 600, NAA, Jubilee, 600, 601, 2000 4-cyl. series 800, 1801, 2000, 3000, 3610, 4000 4-cyl. (1939-64) except Row Crop (1954-83), Replaces: NCA577A, NCA585B, NOTE: Verify that 9N's rear end housing E0NN569AA has (4) tapped holes under the rear end (21-3/4" - 25" total adjustment) housing before ordering. Mounting bolts sold separately, order ABC2271. FDS350 $4.99 3-Point Leveling Box Pin (For FDS028, FDS302 $169.99 FDS219, FDS392) fits: 9N, 2N, 8N, NAA, Swinging Drawbar Assembly w/ Hanger/ Jubilee, 541, 600, 700, 800, 900, 1801, 2000, Bracket, Clevis Assembly fits: 800, 1801, 2600, 3000, 3600, 4000 4-cyl. series, Dexta, 4000 series 4-cyl. (1954-64) except Row Super Dexta (1939-81), Replaces: 9N595 Steiner Crop & Grove NOTE: Mounting bolts (2-3/4" useable length x 5/8" dia.) sold separately order ABC2271. USA made FDS206 $59.99 3-Point Lower Lift Arm fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Dexta, Super ABC435 $57.99 Dexta (1957-64), Replaces: 9N555, 9N556 (Category 1 accommodates 7/8" drawbar Clevis w/ Pin fits: Same as FDS208, or lower link pins, 32" hole centers, 1/2" FDS302, Replaces: NCA803B thick) NOTE: Red primer. Lower lift arm w/ forged ball-joint ends.

234 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Drawbars, parts cont... Drawbars, parts cont... Part # USD Description / Application Part # USD Description / Application FDS305 $5.99 FDS211 $31.50 Clevis Pin w/ Lynch Pin fits: Same as Drawbar Lock (Category 1) (For FDS022) FDS208, FDS302, Replaces: 8N804 Replaces: 9N5182L NOTE: Only fits aftermarket bracket.

FDS306 $56.99 ABC1433 $2.99 3-Point Lift Arm Category 2 to a Category Swinging Drawbar fits: Same as FDS208, 1 3-Point Hitch Reducer Bushing FDS302, Replaces: C0NN805F, 86531346 fits: Ford models w/ a Category 2, 3-point hitch switching to a Category 1 3-point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length) FDS4105 $229.95 NEW! Swinging Drawbar Assembly w/ Hanger fits: 2000 3-cyl. series, 2600, 2610, ABC302 $8.99 3000 series, 3600, 3610; Industrials: 230A, Eyelet Assembly Kit w/ Nut & Lock New Holland 231, 233, 333, 335, 3400, 3500, 420, 530A, Washer (For Sway Chain) fits: 9N, 2N, Ford 531, 535 (1965-83), Replaces: CFPN820A 8N, NAA, Jubilee, 501, 600, 700, 800, 900, (1-7/8" wide, 1-1/8" thick, 32-1/2" long, Dexta, Super Dexta, 1801, 2000, 3000, 4000 4-cyl. series (1939-81),Inc.® Replaces: NCB660A 1-1/2" offset) NOTE: Use (6) 5/8"-11 x 1-3/8" long bolts, but not included. NOTE: Kit includes eyelet assembly,

Will not fit compact models. nut, lock washer. Chassis parts

ABC2271 $9.99 FDS274 $49.99 Drawbar Check Chain Kit fits: 9N, 2N, Swinging Drawbar Bolt Kit fits: 9N - 4000 8N, NAA, Jubilee, 501, 600, 700, 800, 900, series (4-cyl.) (1939-64) NOTE: Includes Dexta, Super Dexta, 1801, 2000, 2600, 8 bolts & lock washers. Will fit FDS208, 2610, 3000, 3600, 3610, 4000 4-cyl. series FDS302. (1939-81) NOTE: Kit includes RH / LH Parts,anchors, (2) eyelets, (2) chains, (4) clevis FDS303 $64.50 w/ pins, hardware.

Hanger / Bracket only fits: Same as FDS4694 $69.99 FDS208, Replaces: NCA809A NEW! Drawbar Safety Chain fits: 2N, 8N, 9N, NAA (1939-54), Replaces: 9N5370 USA made FDS304 $64.50

Hanger / Bracket only fits: Same as FDS302, Replaces: NDA809A TractorCab parts ABC2010 $25.95 Adjustable Stabilizer Bar (For tractors w/ Part # USD Description / Application Category 1 3-point) (1939-90) Adjustable from 27-1/2" to 37" length, 23" center tube MIS4608 $23.99 NEW! Door Strut fits: New Holland length, 7/8" threaded ends, 7/8" pin holes TL70, TL80, TL90, TL100, TM115, TM125, NOTE: Adjustable ends for desired TM135, TM150, TM165, TS90, TS100, length. Normally 2 used per tractor; TS110, TS115, 5640, 6640, 7740, 7840, 8160, Sold individually. 8240, 8260, 8340, 8360, 8560 FDS024 $69.99 Replaces: 81867743 (8-7/16" c.c. ball & Stabilizer Kit fits: 9N, 2N, 8N, NAA, socket, 3.930" piston stroke, 5/16" O.D. Jubilee, 600, 800, 2000 3-cyl. & 4-cyl., 3000, shaft ) NOTE: Both ends have ball & Steiner4000 4-cyl. series (1939-74) Category 1 socket. NOTE: Primed red. Flat bars not MIS4623 $18.99 turnbuckles. Kit includes (2) arms, (2) brackets, pins. NEW! Roof Hatch Strut fits: New Holland FDS022 $46.99 TM115, TM125, TM135, TM150, TM165, TS90, TS100, TS110, TS115 Standard Drawbar (Category 1) Replaces: E4NN94502R28AA, 83949895 fits: Ford models, Replaces: 9N5182A (8.250" long, 4.520" piston stroke) (1" x 2-1/2" x 26", 7/8" pin size)

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 235 Mylar decals All decals are USA made.

Part # USD Application Tips on applying our decals DEC292 $3.50 Ford Script decal (1-pc. vinyl die cut) (1-3/4" tall x 7" long) All decals are mylar unless otherwise NOTE: Fender decal & misc. equipment. noted. Have the pitted area filled, DEC232 $26.99 sanded smooth and painted. Paint must be completely dry prior to 10-pc. Complete warning & misc. decals, including hood & installation (usually 3 - 4 weeks). fender decals for 9N, 2N, 8N (1939-52) Wash area with soap & water (new paint included) on which decal is to DEC442 $26.99 be placed. 9-pc. Complete Set w/ decal placement instructions For NAA, Jubilee (1953-54) For mylar decals (film between DEC388 $25.99 501 Offset Workmaster (1959-62) lettering): Trim to border of design DEC362 $25.99 541 Offset Workmaster (1959-62) where possible prior to removing white backing paper. Lightly spray DEC332 $14.99 600 (1954-57)

Ford the area with window cleaner (do DEC443 $49.99 600 (1954-57) NOTE: Does not include Powermaster or not use window cleaner in aerosol Inc.® Workmaster decal. New Holland New can). Peel white backing paper from decal and place in position. DEC445 $54.50 601 series (1957-62) NOTE: Includes Workmaster decals. Squeegee window cleaner from DEC338 $25.99 601 Workmaster (1957-62) under decal beginning in center and DEC333 $14.99 640 (1954-57) working outward. If air bubbles occur, puncture with pin & smooth down. DEC299 $26.99 641 Workmaster (1957-62) Please note: These decals have DEC334 $14.99 650 (1954-57) been printed on a tough mylar film using mylar ink. A pressure sensitive DEC344 $15.49 660 (1954-57)Parts, adhesive has been employed on the DEC405 $31.50 661 Workmaster (1957-62) back of the mylar to insure good DEC408 $31.50 671 Select-O-Speed (1959-62) adhesion to any clean, hard surface. Miscellaneous DEC347 $15.49 740 (1954-57) For vinyl cut deals (no film DEC437 $24.99 741 Workmaster (1957-62) between lettering) Special order only: DEC410 $20.99 771 Select-O-Speed (1959-62) Peel backing paper from decal. The DEC444 $49.99 800 (1954-57) NOTE: Does not include Powermaster or decal will be stuck to the application Workmaster decal. paper. Align the decal using the DEC335 $14.99 800 (1954-57) design, not the application paper, and firmly press decal into place. TractorDEC446 $54.50 801 - 861 series (1957-62) Slowly remove the application paper NOTE: Includes Powermaster decals. starting at one corner. Please note: DEC295 $25.99 801 Powermaster (1957-62) The colors are fused into the vinyl eliminating stacking. CAUTION: DEC363 $31.50 801 Select-O-Speed (1959-62) Inspect all decal pieces before DEC391 $29.99 841 Diesel (1958-62) applying to tractor. DEC300 $25.99 841 Powermaster (1957-62) DEC337 $14.99 850 (1954-57) DEC297 $25.99 851 Powermaster (1957-62) DEC346 $15.49 860 (1954-57) Steiner DEC393 $25.99 861 Diesel (1958-62) DEC360 $25.99 861 Powermaster (1957-62) DEC365 $31.50 871 Select-O-Speed (1959-62) DEC404 $32.99 881 Select-O-Speed (1959-62) DEC348 $25.99 901 Powermaster (1957-62) DEC342 $15.49 960 (1954-57) DEC361 $25.99 961 Powermaster (1957-62)

236 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Mylar decals - USA made cont... Part # USD Description / Application DEC364 $25.99 971 Select-O-Speed (1959-62) DEC396 $29.99 981 Select-O-Speed (1959-62) DEC399 $29.99 961 Diesel (1958-62) DEC429 $25.99 2000 (1962-64) Hood set only ABC2366 DEC193 $38.99 2000 3-cyl. (1965-68) DEC197 $35.99 2000 3-cyl. (1968-74) DEC201 $31.99 2600 (1975-81) DEC194 $40.99 3000 (1965-68) DEC198 $28.99 3000 (1968-74) DEC430 $25.99 4000 (1962-64) Hood set only ABC2362 DEC195 $39.99 4000 3-cyl. (1965-68) DEC199 $29.99 4000 (1968-74) New Holland

DEC451 $9.75 1-pc. Transmission Shift Pattern decal fits: 2000, 3000, Ford 4000 series (1965-85); Industrials: 230A - 540A w/ 8 speed transmission & Live PTO, Replaces: C5NN7B292, Inc.® D3NN7B292B (3-15/16" x 5-1/4") ABC2357 DEC4656 $8.99 NEW! 1-pc. 8 Speed Transmission Shift Pattern decal Miscellaneous fits: 4000, (4100, 4600 both up to 5/1976) (All w/ independent PTO), Replaces: C5NN7B292FN Deluxe tractor DEC196 $38.99 5000 (1965-68) umbrellas DEC200 $30.99 5000 (1968-75) Four oil-tempered spring steel DEC211 $54.99 7000 (1971-74) Parts,bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting DEC292 DEC332 DEC445 DEC393 DEC194 brackets, zinc plated for rust resistance and lasting appearance. 54" square cover NO REFUNDS on mylar decals if applied to surface and / or if damaged. is made of durable polyester NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water. Tractor material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform.

ABC2366 • $209.99 Blue Deluxe Umbrella Steiner w/ Brackets ABC2362 • $209.99 White Deluxe Umbrella w/ Brackets

ABC2357 • $209.99 NEW! DEC4656 - 8 speed transmission shift pattern decal Red Deluxe Umbrella w/ Brackets

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 237 Manuals, videos Build your "how-to" library with us. Reprint manuals are a must for your classic Ford. View tutorials and most requested repair videos at SteinerTractor.TV

™ I & T Shop Service manuals - Printed in USA Parts An I & T Shop Service™ manual tells you how to take a tractor apart, how to manual fix it and how to put it back together again. These are authentic manuals that deal with repairs in the language of a mechanic with an easy to use reprints format. They include valuable information as to specifications, torques, etc. illustrated by exploded views and photos. If you are in serious repairs or Printed restoration, you need an I & T Shop Service™ manual. It will offer many short in USA cuts and save you time! Part # USD Application A parts manual (reprint FO4 $34.95 9N, 2N, 8N NOTE: Includes electrical wiring diagram & parts schematic only) has exploded views of all parts on the FO19 $34.95 NAA tractor. With numbered FO20 $34.95 Series 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl. pictures giving you Ford NOTE: Includes electrical wiring diagram. greatInc.® detail on assembly FO44 $34.95 New Holland New 1100, 1110, 1200, 1210, 1300, 1310, 1500, 1510, 1700, 1710, 1900, 1910, 2110 and disassembly. It NOTE: Includes electrical wiring diagram. also gives you a guide, FO46 $34.95 1120, 1220, 1320, 1520, 1720, 1920, 2120 Compacts with numbers, for NOTE: Includes electrical wiring diagram. ordering parts, and FO31 $34.95 Series 2000 3-cyl., 3000 3-cyl., 4000 3-cyl. (Covers models prior to 1975) makes you seem much NOTE: Includes electrical wiring diagram. more informed when FO41 $34.95 2310, 2600, 2610, 3600, 3610, (4100 1975 & up), 4110 3-cyl., 4600, 4600SU, talking with a dealer. (4610, 4610SU both up to 1984) Parts,Many service manuals, NOTE: Includes electrical wiring diagram for gas tractors only w/out cab. after telling you how to FO43 $34.95 2810, 2910, 3910 disassemble & repair Miscellaneous FO47 $34.95 3230, 3430, 3930, 4630, 4830 in detail, will simply say "reassemble". If you FO42 $31.95 Series 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 NOTE: Includes electrical wiring diagram. have your PTO in the wash tank, in pieces, FO201 $34.95 Ford Collection: Models Fordson Dexta, Fordson Super Dexta, 2000 Super without notes, you have Dexta, New Performance Super Dexta, models Fordson Major diesel (FMD), Fordson Power Major (FPM), Fordson Super Major (FSM) New a problem. The parts Performance Fordson Super Major (New FSM), 5000 Super Major, series manual can help you out 6000, Commander 6000, Tractorseries 1000 & 1600, series 8000, 8600, 8700, 9000, with an exploded view 9600, 9700, TW10, TW20, TW30 of the PTO unit, and you can see immediately how it all goes back together. You need a parts manual!

From a satisfied customer! BOK065 • $21.99 9N - Jubilee (1939-54) “I've ordered from Steiner on numerous occasions. They never let me down. Pleased with their customer service and impressed with BOK1313 • $29.95 their promptedSteiner shipping! Had one discrepancy with an online order NAA, 501, 600, 700, 800, 900, 1801 (1953-59) gas, once... one 3 minute phone call (to me for clarification) and it was diesel, LP resolved! I will continue to use Steiner as my "Go-To" for tractor parts!!!” - Joshua M.

238 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Operator manual reprints - Printed in USA An operator’s manual (reprints only) sometimes referred to as the owner’s manual is the manual that came with the tractor. It is the manual that was given to the ultimate consumer by the manufacturer. It can be compared to the manual you receive in the glove box of a new car. This manual gives the owner-operator instructions, shift patterns, capacities (anti-freeze, crankcase, etc.) and adjustment procedures (brakes, clutch, etc). This is a very useful and valuable tool in operating your tractor.

Service manual reprints - Printed in USA A service manual reprint with wiring diagrams tells you how to take the tractor apart, how to fix it and how to put it back together again. It is a reprint of the manual that the factory furnished the dealer’s shop service department, and was not sent or given to individual retail customers. It deals with repairs in the language of a mechanic. Often times it includes valuable information as to specifications, torques, etc. A service manual reprint will offer many short cuts and save you time!

Part # USD Application / Description BOK061 $16.99 9N, 2N (1939-47) (Operator's manual) NOTE: Includes electrical wiring diagram. New Holland

BOK063 $18.99 9N, 2N (1939-47) (Service manual) NOTE: Includes electrical wiring diagram. Ford REP1446 $18.95 9N, 2N (1939-47) (Owners Product Information Manual) NOTE: This manual explains basic tractor operation, Ferguson system, 21 different Ferguson implements &Inc.® accessories. Miscellaneous BOK040 $16.99 8N (1947-52) (Operator's manual) NOTE: Includes electrical wiring diagram. BOK064 $16.99 8N (1947-52) (Service manual) NOTE: Has very limited information on engine service. BOK062 $16.99 NAA (1953-54) (Operator's manual) REP1142 $15.99 NAA, Jubilee (1953-54) (Service manual) REP1681 $16.99 600 series, 800 series gas, LP w/ 4 or 5 speed transmission (1954-57) (Operator's manual) REP1679 $16.99 601 series, 801 series gas, LP w/ 4 or 5 speed transmissionParts, (1958-62) (Operator's manual) REP3786 $43.99 601, 611, 621, 631, 641, 651, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881 (1957-62) (Operator's Manual) NOTE: Covers gas, diesel 4 speed, 5 speed, 10 speed Select-O- Speed transmissions. REP1685 $16.99 700, 740, 900, 950, 960 gas, LP w/ 4 or 5 speed transmission (1954-57) (Operator's manual) REP1683 $16.99 701 series, 901 series (1957-62) gas, LP w/ 4 speed or Select-o-speed transmission (Operator's manual) REP1146 $28.99 600, 601, 700, 701, 800, 801, 900, 901, 1801 series (1955-60) gas, LP, diesel (Service manual) NOTE: Includes electricalTractor wiring diagram. REP1369 $16.99 2000 3-cyl., 3000, 4000 3-cyl., 5000 (1965-75) All Purpose & LCG gas, diesel (Operator's manual) REP1139 $18.99 Fordson Major (1952-58) (Service manual) REP1342 $43.99 Ford/Dearborn Farm Equipment (Beginning in 1939) (Operator's manual) NOTE: This manual contains almost 900 pages of assembly, operations, part numbers, and maintenance! REP2643 $14.95 Char-Lynn Power Steering (Owner's manual) NOTE: Includes installation, operation, maintenance & trouble shooting information on the pump & torque generator. REP087 $34.95 Sherman Transmission Over-Under, Reversing, Live PTO; 9N - 4000 4-cyl. (1939-64) Steiner(Service manual) REP4082 $12.95 Marvel Schebler TSX & DLTX Carburetor (Service Manual) NOTE: This is the factory manual that explains carburetor settings, the carburetor rebuilding process, and also provides trouble shooting for TSX & DLTX series carburetors.

STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 239