PROJECT DEVELOPED and IMPLEMENTED Designed and Implemented by CJSC “ASC”
Total Page:16
File Type:pdf, Size:1020Kb
PROJECT DEVELOPED AND IMPLEMENTED Designed and implemented by CJSC “ASC” 2 www.asc-ural.ru The scope of main work of CJSC “Automated Systems and Complexes” which contributed to create the experience and expertise of the up-to-date approach in terms of automation system building, efficient application of the state-of-the-art technologies and optimal strategy in respect of the goal achievement. FERROUS METALLURGY Electric drives for decoiler and cutting line rollers RKW. “Uralskaya folga” OJSC, 2016 the town of Mikhailovsk, Sverdlovsk region. Replacement of soft starter with a frequency converter for the drive Nizhnie Sergi Metallurgical Plant OJSC, 2016 of the redundant pump of unit No.3 of treatment facilities in the Berezovsky, Sverdlovsk region rolling plant No.4. Installation of exit side oxygen analyzers on furnaces No.4 and No.5. Nizhnie Sergi Metallurgical Plant OJSC, 2016 Berezovsky, Sverdlovsk region Rolling mill commissioning supervision. Metallurgical Plant, 2016 Karabuk, Turkey Commissioning of integrated control system for wagon pusher T-20. JSC “ArcelorMittal Temirtau”, 2016 Design, equipment delivery, commissioning. Temirtau, Republic of Kazakhstan. Automation of ladle furnace sector aspiration system control. OJSC “EVRAZ- NTMK“, 2016 Nizhniy Tagil, Sverdlovsk region. Modernization of reversing rolling mill 1500 main drive control OJSC “Asha Metallurgical Plant”, 2016 system. Design, equipment delivery, commissioning. Asha, Chelyabinsk region. Revamping of ventilation system for electric motors of rolling mill OJSC “EVRAZ- NTMK“, 2016 stand main drives. Equipment delivery, commissioning. Nizhniy Tagil, Sverdlovsk region. Revamping of blast furnace automated process control system. PJSC «Nadezhdinsk Metallurgical Plant», 2016 Equipment delivery, commissioning. Serov, Sverdlovsk region. Revampingn of furnace automation equipment. Design, software JSC “Vyksa Metallurgical Plant”, 2016 development, equipment delivery, commissioning. Vyksa, Nizhny Novgorod region. Converter (controlled rectifier) for electrolytic cell of the hydrogen OJSC “OMK-Steel”, 2015 production plant. Vyksa, Nizhny Novgorod region. Safety guards and systems for decarburizing annealing machines. OJSC “VIZ-Steel“, 2015 Equipment delivery, commissioning. Ekaterinburg. Group Soft Start System for High Voltage Induction Motors of Des- OJSC “OMK-Steel”, 2015 caling Pumps. Equipment delivery, commissioning. Vyksa, Nizhny Novgorod region. Modernization of installation for pipe length measurement, weigh- OJSC “Sinarsky Pipe plant”, 2015 ing, marking and stamping. Equipment delivery, commissioning. Kamensk-Uralsky, Sverdlovsk region. Modernization of pipe threading line. OJSC “Sinarsky Pipe plant”, 2015 Design, equipment delivery, commissioning. Kamensk-Uralsky, Sverdlovsk region. Commissioning of waste gas purification system. JSC “ArcelorMittal Temirtau”, 2015 Temirtau, Republic of Kazakhstan. Commissioning of Rolling Equipment. LLC “NLMK Kaluga”, 2015 Software modification, commissioning. Vorsino village, Kaluga region. Data as of August, 2016 3 Designed and implemented by CJSC “ASC” Modernization of pipe marking machine. OJSC “Pervouralsk novotrubni plant“, 2015 Pervouralsk, Sverdlovsk region. Soft starter for high voltage synchronous drives of exhausters. OJSC «Novolipetsk Steel Plant», 2015 Equipment delivery, commissioning. Lipetsk. Commissioning of rolling equipment. GV DO BRASIL 2015 Pindamonhangaba, Brazil. Tuning of control system of Zundwig reversible cold rolling mill OJSC “VIZ-Steel“, 2015 1200. Design, equipment delivery, commissioning. Ekaterinburg. Revamping of electric drives of 20/5 ton capacity crane. OJSC “Seversky Tube Works”, 2014 Design, equipment delivery, commissioning. Polevskoy, Sverdlovsk region. Electrical Equipment of Rotary Hearth Furnace. OJSC “STZ”, 2014 Equipment delivery, commissioning. Polevskoy, Sverdlovsk region. Billet/ Shell Tracking System of Piercing Mill Section. OJSC “STZ”, 2014 Design, equipment delivery, commissioning. Polevskoy, Sverdlovsk region. Replacement of electric drives and control system of double-spindle OJSC “Sinarsky Pipe Works“, 2014 coupling sleeve making machine EMAG MSC22. Kamensk-Uralsky, Sverldlovsk region. Design, equipment delivery, commissioning. Commissioning of Automated Control System of 21,5 MW Mini-CHP OJSC “SUMZ”, 2014 (combined heat and power plant). Revda, Sverdlovsk region. Automatic identification of large diameter pipes. OJSC “Vyksa Metallurgical Plant”, 2014 Design, equipment delivery, commissioning. Vyksa, Nizhny Novgorod region. Revamping of electrical equipment and automated control systems OJSC “Beloretsk Metallurgical Plant”, 2014 of rolling mill 150. Design, equipment delivery, commissioning. Beloretsk, Bashkortostan. Automated process control system of pipe finishing section. OJSC “Vyksa Metallurgical Plant”, 2014 Design, equipment delivery, commissioning. Vyksa, Nizhny Novgorod region. Modular compressor station Atlas Copco. CJSC “NSMMZ”, 2014 Design, equipment delivery, commissioning. Revda, Sverdlovsk region. Automated Control System of the Kiln Unit of Lime Production Area LLC “Krasnosulinsky Metallurgical Plant”, 2014 in the Shaft Kiln. Design. Krasny Sulin, Rostov region. System of Automatic Strip Clamping and Stretching in Transient OJSC “Mariupol Metallurgical Plant n.a. Ilyich”, 2014 Rolling Modes on a 4-stand Strip Cold Rolling Mill 1700. Mariupol, Donetsk region, Ukraine. Design, equipment delivery, commissioning. Revamping of lime kiln. OJSC “Pervouralsk novotrubni plant“, 2014 Design, equipment delivery, commissioning. Pervouralsk, Sverdlovsk region. Power supply of lime production section. OJSC “Pervouralsk novotrubni plant“, 2014 Design, equipment delivery, commissioning. Pervouralsk, Sverdlovsk region. Revamping of Electric Drives of Sizing and Reeling Mills. OJSC “Volzhski Tube-Rolling Plant“ (OJSC “VTZ“) 2014 Design, delivery, erection, adjustment. Volzhski, Volgograd oblast. Revamping of Straightening Annealing Device AVO-3. OJSC “VIZ-Steel“, 2014 Design works, delivery and commissioning. Ekaterinburg. Revamping of Electrical Equipment of Electric Casting Overhead Evraz Joint West Siberian Metallurgical Plant, JSC, 2013 Crane Control System. Design, delivery, erection, adjustment. Novokuznetsk, Kemerovo region. Replacement of control system on EMAG DZ80/80 special two-spin- OJSC “Sinarsky Pipe Works“, 2013 dle coupling sleeve machine. Programming, start-and-adjustment Kamensk-Uralsky, Sverldlovsk oblast. works. Design, Supply and Commissioning of Electrical Equipment for Cir- Severskiy tube plant, 2013 cular Furnace Charging Area. Design, delivery, erection, adjustment. Polevskoi, Sverdlovsk region. Commissioning of Electrical Equipment of Piercing Mill Main Drives Severskiy tube plant, 2013 has been completed. Start-and-adjustment work. Polevskoi, Sverdlovsk region. Commissioning of Descaling Device Equipment. Severskiy tube plant, 2013 Start-and-adjustment work. Polevskoi, Sverdlovsk region. Commissioning of Electric Equipment of Circular Furnace №2. Severskiy tube plant, 2013 Start-and-adjustment work. Polevskoi, Sverdlovsk region. Commissioning Work at a Small Section Mill. Abinskiy electrometallurgical works, 2013 Start-and-adjustment work. LLC - Abinsk, Krasnodar Krai. 4 www.asc-ural.ru Ferrous Metallurgy. Project Design, Delivery and Adjustment of the Automated Thick- Mariupol Metallurgical Plant n.a. Ilyicha, 2013 ness and Tension Control System at 4-Stand Strip Cold-Rolling Mill OJSC - the town of Mariupol, Donetsk region, Ukraine. “1700” of PJSC “Ilyich Iron and Steel Works”, Mariupol, Ukraine. Start-and-adjustment work. Adjustment Work at NLMK-Kaluga. NLMK-Kaluga, 2013 Start-and-adjustment work. Ltd. - Settlement Vorsino, Kaluga oblast. Successful carried out guarantee tests and signed Acts of Industry Ashinsky metallurgical works OJSC, 2013 Commissioning of a shaft gas counterflow kiln of lime kilning. Asha, Chelyabinsk region. Tests, start-and-adjustment work. Relay protection and automation data processing system. OJSC “Pervouralsk novotrubni plant“, 2012 Design, delivery, erection, adjustment. Pervouralsk, Sverdlovsk oblast. Traffic control system of rail and beam shop. Reconstruction of 3 OJSC “NTMK“, 2012 process areas, commissioning. Nizhniy Tagil, Sverdlovsk oblast. Group soft start system for high-voltage electric drives of smoke LLC “KamaSteel“, OJSC “Motovilikhinskie Plants“, 2012 exhausters. Design, delivery, erection, adjustment. Perm. Individual soft start system for high-voltage electric drives of smoke OJSC “Tchusovskoi Metallurgical Plant“, 2012 exhausters. Design, delivery, erection, adjustment. Tchusovoi, Perm Krai. Investigation and commissioning activities at a single-strand slab Xing Cheng Steel Co., 2012 casting machine. Start-and-adjustment work. JiangYin, China. Retrofit of surface-planing machine 7G220-F11. OJSC “Seversky Tube Works“, 2012 Design, delivery, commissioning. Polevskoy, Sverdlovsk oblast. Automated control system of electric drives of heating furnace OJSC “PNTZ“, 2012 No. 6. Design, installation and commissioning activities. Pervouralsk, Sverdlovsk oblast. Process control system and power-supply system of lime-calcining JSC “Ashinskiy metallurgical Works“, 2012 area. Design, installation and commissioning activities. Asha, Chelyabinsk oblast. Automatic pipe-threading line “EMAG“. Modernization activities. OJSC “Sinarsky Pipe Works“ (OJSC “SinTZ“), 2012 Kamensk-Uralsky, Sverdlovsk oblast. Capital repair of pipe-threading machines. Modernization activities LLC “Burilnie trubi“, 2012 (capital repair,