Systemtechnik GmbH & Co.KG Operating elements Systemtechnik Device technology GmbH & Co.KG

WK-Remote controller Individual solutions All units of the Open Lubrication Systems (OLS) and Closed Lubrication The Precision Lubrication Systems of the OLS/CLS series are used for LS-Line Systems (CLS) are equipped with a remote control or interface. The Contact high precision stamping and forming processes. parameters for all the lubrication systems can be adjusted via the remote WK Systemtechnik offers a variety of standard spray chambers as well as control. WK Systemtechnik GmbH & Co. KG Coating- and special spray chambers, open spraying points, tool lubrications and punch Ludwig-Stangl-Weg 11 preservation- lubrication. Even if you need an individual application, we provide solutions D-94518 for you. Do not hesitate to contact us with your special demand. Control via network interface technology Our systems can communicate with w Basic units and mobility your control systems via industrial OLS-Open Lubrication System The base for the basic power unit which is manually movable is a standard interfaces such as Ethernet, CLS-Closed Lubrication System seamlessly welded collection tray with two rollers and two brake rollers

Profinet, Profibus or Ethercat. a ne dimension of cleaning Phone: +49 8553 978280-0 each. Therefore, all the necessary components can be absorbed during ILS-Inline Lubrication System the application. Fax: +49 8553 978280-99 Mail: [email protected] Monitoring and control www.wk-systemtechnik.com Each medium circuit contains an oil filter, a minimum level control and a flow monitoring device including an oil consumption meter which measures the quantity applied/ consumed.

Our know-how - your advantage Journey National park  An energy-efficient and environmentally friendly technology  An easily maintainable construction of the system

from direction  A robust mechanical engineering Regensburg, Nürnberg  A reduced noise level A3 Spiegelau traffic circle  A safe and user-friendly operation Systemtechnik GmbH & Co.KG

Input-panel  Up to three separate media circuits AK CZ traffic Grafenau 2 Lubrication systems A92 circle  Maximum oil viscosity 400 mm/s bei 20° offer PLC-systems. B85 from direction  Lubrication width ranging from 60mm to 1000mm

B533 G Munich B533  Special applications B533 B12 111 Motorway exit Airfield-Heliport Grafenau-Elsenthal EDNF w Germany from direction A WK-Systemtechnik GmbH & Co. K

District Freyung-Grafenau © a ne dimension of lubrication Systemtechnik GmbH & Co.KG LS-Line - Coating and preservation methods

Beölungs- und Konservierungsverfahren CLS - Closed Lubrication System OLS - Open Lubrication System Lubrication- and preservation-procedures The CLS “Closed Lubrication System” is a non-contact spraying system with a lubrication chamber in a closed circuit. This environmentally friendly The OLS “Open Lubrication System” can be used as an oil mist free technology guarantees a constant and even application of forming selective strip lubrication system and as a non-contact spraying lubricants. system with a lubrication chamber without suction system. Berührungslos Dosiergeräte Contactless Dosing units The high-precision gear metering pumps are driven by gearbox step motors The OLS-Spraying-System is a programmable minimum quantity to dose the flow rate also in l. Each forming lubricant circuit also disposes system which makes use of the high precision gear metering of its own spray air circuit including pressure monitoring to ensure finest fog technique. Thus, the high-precision dosing of forming lubricants into Kammersystem Stempelbeölung with different viscosity for highest requirements. ohne Absaugung the production process is possible. Stamp lubrication Chamber system without vacuum Contact lubrication/gel ILS - Inline Lubrication System The medium is injected into the product via nozzles. Kammersystem Our in-line coating systems can be integrated into almost any mit Absaugung Kontaktbeölung existing manufacturing process. Chamber system with vacuum Contact lubrication Challenge us with your task.

Kontaktgel Contact gel lubrication

Touchless lubrication Touchless lubrication with dust extraction Technical Data As contactless spraying system the OLS minimum quantity spraying The spraying systems of the CLS series are used for high-precision coating Technical Data  Dimensions (W x D x H) system with its reliable gear pump technology is combined with a tasks in combination with a spray chamber and a vacuum suction.  Dimensions (W x D x H) 560mm x 560mm x closed spray chamber. Therefore, two-line nozzles which are The application of the medium takes place in a homogenous oil mist in a 500mm x 603mm x 1250mm 1283mm closed spray chamber. The product to be coated is moved at a constant  110 – 240 Volt 50 – 60 Hz  110 – 240 Volt 50 – 60 Hz integrated in the spray chamber are  Maximum oil viscosity speed in the spray chamber. One part of the oil fog covers the product and 2  Maximum oil viscosity supplied with lubricant as 400mm/s bei 20°C 20 mm/s2 with 20°C well as with spray air. the other part is sucked off and  Operation via remote control  Operation via remote control reprocessed by the vacuum to be and/or - Ethernet and/or - Ethernet reused. - Profinet - Profinet All process parameters - Profibus - Profibus such as air pressure, flow, - Ethercat 20mm Lubrication width) The homogenous oil mist is  - Ethercat tank level etc. are Up to three separate media circuits 20 (1 S 300 (300mm lubrication width) 

generated by two-line nozzles S 1  Up to three separate media constantly monitored. In Speed-related control which are supplied on the one  Lubrication width from circuits case of failure, the system  Speed-related control hand with spray air and on the 60 to 1000mm  Lubrication width from 20 to is stopped.  Documentation of oil consumption Examlpe: OL other hand with lubricant. Each Example: CL 1000mm  Special applications  Documentation of oil pump outlet only supplies one  Option: Cleaning cycle consumption nozzle. All process parameters  Option: Two circle dust extraction  Option: Cleaning Cycle such as air pressure, flow, tank  Special applications OLS-lubrication chamber 120mm level and vaccuum suction are

constantly monitored. CLS-lubrication chamber with dust extraction