Chapter 1. Motion and Momentum

Total Page：16

File Type：pdf, Size：1020Kb

Chapter 1. Motion and Momentum SEC. 1 What is Motion? The Students Will: • Define Speed, velocity and displacement • Graph Motion Terms to Know • Speed • Average Speed • Instantaneous Speed • Velocity • Distance • Displacement What is Motion? • Movement--------- changes in position • Requires a point of reference (starting point) What is Distance? • The length of the route one travels Ex. Distance from your house ------ school Expressed in Meters (m)/ Kilometers (km) What is Displacement? • Includes the distance between the starting and ending points, and the direction in which you travel. Ex. 40 m east What is Speed? • The distance traveled divided by the time taken to travel the distance is called speed. S= distance (meters) time (seconds) Problem Solving Technique Strictly follow the steps in Physics Problems!!!! GAFSA Given: Ask: Formula: Solution: Answer:(must be boxed) • A passenger train travels from Boston to New York a distance of 350 km in 4 hours. What is the train’s speed? • If the car travels 400 m in 20 seconds how fast is it going? • Bart ran 5000 meters from the cops and a speed of 6 meters/second before he got caught. How long did he run? • If it takes Ashley 3 seconds to run from the batter’s box to first base at a speed of 6.5 meters per second, what is the distance she covered in that time? 2 Kinds of Speed • Average Speed • Instantaneous Speed - The total distance -the speed of an traveled divided object at one by the total instant of time. time taken. Distance Time Graph -Represents the motion of an object What is Velocity? The speed of an object and the direction of its motion is called velocity. Sec. 2 ACCELERATION - What is Acceleration? • The change in velocity divided by the time it takes for the change to happen. -happens when an object speeds up or slows down. 3 Ways to Accelerate: • SPEEDING UP • SLOWING DOWN • CHANGING DIRECTION Formula: Acceleration= final speed (m/s) – initial speed (m/s) time (s) a = sfi – si t ACCELERATION POSITIVE NEGATIVE -OBJECT SPEEDS UP -OBJECT SLOWS DOWN ZERO -SPEED DOES NOT CHANGE SPEED TIME GRAPH Acceleration Problems 1. A roller coaster car rapidly picks up a speed as it rolls down a slope. As it starts down the slope, its speed is 4 m/s . But 3 seconds later, at the bottom of the slope, its speed is 22 m/s. What is its acceleration? • 2. A cyclist accelerates from 0 m/s to 8 m/s in 3 seconds. What is his acceleration? Is this acceleration higher than that of a car which accelerates from 0 to 30 m/s in 8 seconds? SEC 3 MOMENTUM The Students will: - Explain the relationship between mass and inertia. - Define Momentum - Solve problems using the Momentum Formula Terms to Know: • Mass • Inertia • Momentum What is Mass? • The amount of matter in an object is called Mass. • Units-kilograms (kg)/grams (g), pounds (lbs) • The tendency of an object to resist change (position, movement) is called inertia. --objects with mass – inertia What is Momentum? The measure of how hard it is to stop the motion of an object is called Momentum Momentum (p) = mass (kg) x velocity (m/s) p = mv Law of Conservation of Mass: • The total momentum of the objects that collide is the same before and after the collision..

Copy Link

Recommended publications

Glossary Physics (I-Introduction)
1 Glossary Physics (I-introduction) - Efficiency: The percent of the work put into a machine that is converted into useful work output; = work done / energy used [-]. = eta In machines: The work output of any machine cannot exceed the work input (<=100%); in an ideal machine, where no energy is transformed into heat: work(input) = work(output), =100%. Energy: The property of a system that enables it to do work. Conservation o. E.: Energy cannot be created or destroyed; it may be transformed from one form into another, but the total amount of energy never changes. Equilibrium: The state of an object when not acted upon by a net force or net torque; an object in equilibrium may be at rest or moving at uniform velocity - not accelerating. Mechanical E.: The state of an object or system of objects for which any impressed forces cancels to zero and no acceleration occurs. Dynamic E.: Object is moving without experiencing acceleration. Static E.: Object is at rest.F Force: The influence that can cause an object to be accelerated or retarded; is always in the direction of the net force, hence a vector quantity; the four elementary forces are: Electromagnetic F.: Is an attraction or repulsion G, gravit. const.6.672E-11[Nm2/kg2] between electric charges: d, distance [m] 2 2 2 2 F = 1/(40) (q1q2/d ) [(CC/m )(Nm /C )] = [N] m,M, mass [kg] Gravitational F.: Is a mutual attraction between all masses: q, charge [As] [C] 2 2 2 2 F = GmM/d [Nm /kg kg 1/m ] = [N] 0, dielectric constant Strong F.: (nuclear force) Acts within the nuclei of atoms: 8.854E-12 [C2/Nm2] [F/m] 2 2 2 2 2 F = 1/(40) (e /d ) [(CC/m )(Nm /C )] = [N] , 3.14 [-] Weak F.: Manifests itself in special reactions among elementary e, 1.60210 E-19 [As] [C] particles, such as the reaction that occur in radioactive decay.
[Show full text]
Non-Local Momentum Transport Parameterizations
Non-local Momentum Transport Parameterizations Joe Tribbia NCAR.ESSL.CGD.AMP Outline • Historical view: gravity wave drag (GWD) and convective momentum transport (CMT) • GWD development -semi-linear theory -impact • CMT development -theory -impact Both parameterizations of recent vintage compared to radiation or PBL GWD CMT • 1960’s discussion by Philips, • 1972 cumulus vorticity Blumen and Bretherton damping ‘observed’ Holton • 1970’s quantification Lilly • 1976 Schneider and and momentum budget by Lindzen -Cumulus Friction Swinbank • 1980’s NASA GLAS model- • 1980’s incorporation into Helfand NWP and climate models- • 1990’s pressure term- Miller and Palmer and Gregory McFarlane Atmospheric Gravity Waves Simple gravity wave model Topographic Gravity Waves and Drag • Flow over topography generates gravity (i.e. buoyancy) waves • <u’w’> is positive in example • Power spectrum of Earth’s topography α k-2 so there is a lot of subgrid orography • Subgrid orography generating unresolved gravity waves can transport momentum vertically • Let’s parameterize this mechanism! Begin with linear wave theory Simplest model for gravity waves: with Assume w’ α ei(kx+mz-σt) gives the dispersion relation or Linear theory (cont.) Sinusoidal topography ; set σ=0. Gives linear lower BC Small scale waves k>N/U0 decay Larger scale waves k<N/U0 propagate Semi-linear Parameterization Propagating solution with upward group velocity In the hydrostatic limit The surface drag can be related to the momentum transport δh=isentropic Momentum transport invariant by displacement Eliassen-Palm. Deposited when η=U linear theory is invalid (CL, breaking) z φ=phase Gravity Wave Drag Parameterization Convective or shear instabilty begins to dissipate wave- momentum flux no longer constant Waves propagate vertically, amplitude grows as r-1/2 (energy force cons.).
[Show full text]
10. Collisions • Use Conservation of Momentum and Energy and The
10. Collisions • Use conservation of momentum and energy and the center of mass to understand collisions between two objects. • During a collision, two or more objects exert a force on one another for a short time: -F(t) F(t) Before During After • It is not necessary for the objects to touch during a collision, e.g. an asteroid flied by the earth is considered a collision because its path is changed due to the gravitational attraction of the earth. One can still use conservation of momentum and energy to analyze the collision. Impulse: During a collision, the objects exert a force on one another. This force may be complicated and change with time. However, from Newton's 3rd Law, the two objects must exert an equal and opposite force on one another. F(t) t ti tf Dt From Newton'sr 2nd Law: dp r = F (t) dt r r dp = F (t)dt r r r r tf p f - pi = Dp = ò F (t)dt ti The change in the momentum is defined as the impulse of the collision. • Impulse is a vector quantity. Impulse-Linear Momentum Theorem: In a collision, the impulse on an object is equal to the change in momentum: r r J = Dp Conservation of Linear Momentum: In a system of two or more particles that are colliding, the forces that these objects exert on one another are internal forces. These internal forces cannot change the momentum of the system. Only an external force can change the momentum. The linear momentum of a closed isolated system is conserved during a collision of objects within the system.
[Show full text]
Fluids – Lecture 7 Notes 1
Fluids – Lecture 7 Notes 1. Momentum Flow 2. Momentum Conservation Reading: Anderson 2.5 Momentum Flow Before we can apply the principle of momentum conservation to a fixed permeable control volume, we must first examine the effect of flow through its surface. When material flows through the surface, it carries not only mass, but momentum as well. The momentum flow can be described as −→ −→ momentum flow = (mass flow) × (momentum /mass) where the mass flow was defined earlier, and the momentum/mass is simply the velocity vector V~ . Therefore −→ momentum flow =m ˙ V~ = ρ V~ ·nˆ A V~ = ρVnA V~ where Vn = V~ ·nˆ as before. Note that while mass flow is a scalar, the momentum flow is a vector, and points in the same direction as V~ . The momentum flux vector is defined simply as the momentum flow per area. −→ momentum flux = ρVn V~ V n^ . mV . A m ρ Momentum Conservation Newton’s second law states that during a short time interval dt, the impulse of a force F~ applied to some affected mass, will produce a momentum change dP~a in that affected mass. When applied to a fixed control volume, this principle becomes F dP~ a = F~ (1) dt V . dP~ ˙ ˙ P(t) P + P~ − P~ = F~ (2) . out dt out in Pin 1 In the second equation (2), P~ is defined as the instantaneous momentum inside the control volume. P~ (t) ≡ ρ V~ dV ZZZ ˙ The P~ out is added because mass leaving the control volume carries away momentum provided ˙ by F~ , which P~ alone doesn’t account for.
[Show full text]
Leonhard Euler: His Life, the Man, and His Works∗
SIAM REVIEW c 2008 Walter Gautschi Vol. 50, No. 1, pp. 3–33 Leonhard Euler: His Life, the Man, and His Works∗ Walter Gautschi† Abstract. On the occasion of the 300th anniversary (on April 15, 2007) of Euler’s birth, an attempt is made to bring Euler’s genius to the attention of a broad segment of the educated public. The three stations of his life—Basel, St. Petersburg, andBerlin—are sketchedandthe principal works identified in more or less chronological order. To convey a flavor of his work andits impact on modernscience, a few of Euler’s memorable contributions are selected anddiscussedinmore detail. Remarks on Euler’s personality, intellect, andcraftsmanship roundout the presentation. Key words. LeonhardEuler, sketch of Euler’s life, works, andpersonality AMS subject classification. 01A50 DOI. 10.1137/070702710 Seh ich die Werke der Meister an, So sehe ich, was sie getan; Betracht ich meine Siebensachen, Seh ich, was ich hätt sollen machen. –Goethe, Weimar 1814/1815 1. Introduction. It is a virtually impossible task to do justice, in a short span of time and space, to the great genius of Leonhard Euler. All we can do, in this lecture, is to bring across some glimpses of Euler’s incredibly voluminous and diverse work, which today fills 74 massive volumes of the Opera omnia (with two more to come). Nine additional volumes of correspondence are planned and have already appeared in part, and about seven volumes of notebooks and diaries still await editing! We begin in section 2 with a brief outline of Euler’s life, going through the three stations of his life: Basel, St.
[Show full text]
Duality of Momentum-Energy and Space-Time on an Almost Complex
Duality of momentum-energy and space-time on an almost complex manifold You-gang Feng Department of Basic Sciences, College of Science, Guizhou University, Cai-jia Guan, Guiyang, 550003 China Abstract: We proved that under quantum mechanics a momentum-energy and a space-time are dual vector spaces on an almost complex manifold in position representation, and the minimal uncertainty relations are equivalent to the inner-product relations of their bases. In a microscopic sense, there exist locally a momentum-energy conservation and a space-time conservation. The minimal uncertainty relations refer to a local equilibrium state for a stable system, and the relations will be invariable in the special relativity. A supposition about something having dark property is proposed, which relates to a breakdown of time symmetry. Keywords: Duality, Manifold, momentum-energy, space-time, dark PACS (2006): 03.65.Ta 02.40.Tt 95.35.+d 95.36.+x 1. Introduction The uncertainty relations are regarded as a base of quantum mechanics. Understanding this law underwent many changes for people. At fist, it was considered as a measuring theory that there was a restricted relation between a position and a momentum for a particle while both of them were measured. Later on, people further realized that the restricted relation always exists even if there is no measurement. A modern point of view on the law is that it shows a wave-particle duality of a microscopic matter. The importance of the uncertainty relations is rising with the development of science and technology. In the quantum communication theory, which has been rapid in recent years, an uncertainty relation between a particle’s position and a total momentum of a system should be considered while two particles’ 1 entangled states are used for communication [1] .
[Show full text]
Leonhard Euler - Wikipedia, the Free Encyclopedia Page 1 of 14
Leonhard Euler - Wikipedia, the free encyclopedia Page 1 of 14 Leonhard Euler From Wikipedia, the free encyclopedia Leonhard Euler ( German pronunciation: [l]; English Leonhard Euler approximation, "Oiler" [1] 15 April 1707 – 18 September 1783) was a pioneering Swiss mathematician and physicist. He made important discoveries in fields as diverse as infinitesimal calculus and graph theory. He also introduced much of the modern mathematical terminology and notation, particularly for mathematical analysis, such as the notion of a mathematical function.[2] He is also renowned for his work in mechanics, fluid dynamics, optics, and astronomy. Euler spent most of his adult life in St. Petersburg, Russia, and in Berlin, Prussia. He is considered to be the preeminent mathematician of the 18th century, and one of the greatest of all time. He is also one of the most prolific mathematicians ever; his collected works fill 60–80 quarto volumes. [3] A statement attributed to Pierre-Simon Laplace expresses Euler's influence on mathematics: "Read Euler, read Euler, he is our teacher in all things," which has also been translated as "Read Portrait by Emanuel Handmann 1756(?) Euler, read Euler, he is the master of us all." [4] Born 15 April 1707 Euler was featured on the sixth series of the Swiss 10- Basel, Switzerland franc banknote and on numerous Swiss, German, and Died Russian postage stamps. The asteroid 2002 Euler was 18 September 1783 (aged 76) named in his honor. He is also commemorated by the [OS: 7 September 1783] Lutheran Church on their Calendar of Saints on 24 St. Petersburg, Russia May – he was a devout Christian (and believer in Residence Prussia, Russia biblical inerrancy) who wrote apologetics and argued Switzerland [5] forcefully against the prominent atheists of his time.
[Show full text]
Momentum Energy General Terms
Here’s all the fine print. (Yes, it’s dull. But it’s important.) GENERAL TERMS 1 HELLO. We’re all about making energy more human, so we’ve tried to include plain English in this document. However, it’s still a legal agreement, with defined terms. How to contact us. Post: PO Box 353 Flinders Lane, Melbourne VIC 8009 Phone: 1300 662 778 Email: [email protected] 2 CONTENTS The Market Contract 4 Charges 11 Billing 12 Payment 14 Disconnection and reconnection 16 Other obligations 17 Staying in touch 21 Complaints 21 Uncontrollable events 22 Retailer of Last Resort events 22 Privacy and confidentiality 23 General 24 Explanation of terms 24 3 THE MARKET CONTRACT 1. The Market Contract in a nutshell. You’ve chosen us as your energy retailer and given your consent to: • enter into the Market Contract, and • allow the Supply Address to be transferred to us (if we’re not already Responsible for the Supply Address). Under the Market Contract, we’ll sell energy to each Supply Address listed in your Energy Plan (when we refer to “the Supply Address” in these General Terms, we mean any or all of the Supply Addresses listed in your Energy Plan, depending on the context). We’ll also arrange for related products and services to be provided to the Supply Address by third parties (like a new meter or a special meter read). 2. Who are the parties to the Market Contract? Momentum Energy Pty Ltd (ABN 42 100 569 159) of Level 10, 4-12 Elizabeth St, Hobart, Tasmania 7000 (us or we) and you, the Small Customer set out in the Energy Plan, have entered into the Market Contract for the sale of energy.
[Show full text]
Chapter 9 – Center of Mass and Linear Momentum I
Chapter 9 – Center of mass and linear momentum I. The center of mass - System of particles / - Solid body II. Newton’s Second law for a system of particles III. Linear Momentum - System of particles / - Conservation IV. Collision and impulse - Single collision / - Series of collisions V. Momentum and kinetic energy in collisions VI. Inelastic collisions in 1D -Completely inelastic collision/ Velocity of COM VII. Elastic collisions in 1D VIII. Collisions in 2D IX. Systems with varying mass X. External forces and internal energy changes I. Center of mass The center of mass of a body or a system of bodies is a point that moves as though all the mass were concentrated there and all external forces were applied there. - System of particles: General: m1x1 m2 x2 m1x1 m2 x2 xcom m1 m2 M M = total mass of the system - The center of mass lies somewhere between the two particles. - Choice of the reference origin is arbitrary Shift of the coordinate system but center of mass is still at the same relative distance from each particle. I. Center of mass - System of particles: m2 xcom d m1 m2 Origin of reference system coincides with m1 3D: 1 n 1 n 1 n xcom mi xi ycom mi yi zcom mi zi M i1 M i1 M i1 1 n rcom miri M i1 - Solid bodies: Continuous distribution of matter. Particles = dm (differential mass elements). 3D: 1 1 1 xcom x dm ycom y dm zcom z dm M M M M = mass of the object M Assumption: Uniform objects uniform density dm dV V 1 1 1 Volume density xcom x dV ycom y dV zcom z dV V V V Linear density: λ = M / L dm = λ dx Surface density: σ = M / A dm = σ dA The center of mass of an object with a point, line or plane of symmetry lies on that point, line or plane.
[Show full text]
Forces Transfer Momentum
KEY CONCEPT Forces transfer momentum. BEFORE, you learned NOW, you will learn •A force is a push or a pull • What momentum is • Newton’s laws help to describe • How to calculate momentum and predict motion • How momentum is affected by collisions VOCABULARY EXPLORE Collisions momentum p. 368 What happens when objects collide? collision p. 370 conservation of PROCEDURE MATERIALS momentum p. 371 2 balls of 1 Roll the two balls toward each other on a different masses flat surface. Try to roll them at the same speed. Observe what happens. Experiment by changing the speeds of the two balls. 2 Leave one ball at rest, and roll the other ball so that it hits the first ball. Observe what happens. Then repeat the experiment with the balls switched. WHAT DO YOU THINK? •How did varying the speed of the balls affect the motion of the balls after the collision? •What happened when one ball was at rest? Why did switching the two balls affect the outcome? Objects in motion have momentum. If you throw a tennis ball at a wall, it will bounce back toward you. What would happen if you could throw a wrecking ball at the wall at the same speed that you threw the tennis ball? The wall would most likely break apart. Why would a wrecking ball have a different effect on the wall than the tennis ball? A moving object has a property that is called momentum. VOCABULARY Momentum (moh-MEHN-tuhm) is a measure of mass in motion; Make a magnet word diagram for momentum.
[Show full text]
Euler As Physicist Dieter Suisky
Euler as Physicist Dieter Suisky Euler as Physicist 123 Dr. Dr. Dieter Suisky Humboldt-Universitat¨ zu Berlin Institut fur¨ Physik Newtonstr. 15 12489 Berlin Germany [email protected] ISBN: 978-3-540-74863-2 e-ISBN: 978-3-540-74865-6 DOI 10.1007/978-3-540-74865-6 Library of Congress Control Number: 2008936484 c Springer-Verlag Berlin Heidelberg 2009 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: WMXDesign GmbH, Heidelberg Printed on acid-free paper 987654321 springer.com Preface In this book the exceptional role of Leonhard Euler in the history of science will be analyzed and emphasized, especially demonstrated for his fundamental contri- butions to physics. Although Euler is famous as the leading mathematician of the 18th century his contributions to physics are as important and rich of new methods and solutions.
[Show full text]
Energy and Momentum
IntroductionIntroduction toto EnergyEnergy andand MomentumMomentum Duke Talented Identification Program Kevin Lawrence Thursday, August 06, 2009 ContentContent y What is Energy? ◦ Force ◦ Work y Forms of Energy ◦ Potential Energy ◦ Kinetic Energy y Law of Conservation of Energy y Momentum ◦ Law of Conservation of Momentum WhatWhat isis Energy?Energy? y Simply, energy is the ability to do work measured in the unit joules (J). y More technically, energy is the scalar physical quantity that describes the amount of work that can be performed by a force. ForceForce y A force is a push or pull that can cause an object with mass to change its velocity. y Force is a vector quantity, i.e. described by magnitude and direction. ForceForce (2)(2) y Force is a quantity which is measured using the standard metric unit known as the Newton. y One Newton is the amount of force required to give a 1-kg mass an acceleration of 1 m/s/s. y The force exerted by gravity on 1 kg = 9.8 N. WorkWork y Work is related to the distance a force moves an object. Work done (J) = Force (N) • Displacement (m) y Work is the measure of a quantity that is capable of accomplishing macroscopic motion of a system due to the action of a force over a distance. Displacement = 5.5 m Work done = 100 N x 5.5m = 550 J WorkWork (2)(2) FormsForms ofof EnergyEnergy y There are many different forms of energy. Some of which include: ◦ Kinetic Energy ◦ Potential Energy ◦ Chemical Energy ◦ Thermal Energy ◦ Light Energy PotentialPotential EnergyEnergy y Potential energy is the stored energy of position possessed by an object.
[Show full text]