Tantimber Tmt Lumber Grading Definitions

Total Page:16

File Type:pdf, Size:1020Kb

Tantimber Tmt Lumber Grading Definitions THERMOWOOD TMT LUMBER GRADING DEFINITIONS Tantimber / TMT Lumber Grading Definitions TANTIMBER TMT LUMBER GRADING DEFINITIONS Tantimber Ash Lumber Origin: North America Botanical Name: Fraxinus Americana Grade: FAS (First & Selects) For more information see American Hardwood Grading Classifications book. Moisture: 4 - 7% Process: Thermowood (TMT) Process Temperature: 360°F (interior) - 410°F (exterior) Features: Thermowood Lumber falls into the semi-finished category, and should not be regarded as fully finished wood. Therefore, things must be considered. Due to the Thermowood process, which reduces the moisture of the wood, there tends to be a 5-7% reduction in the width and thickness of each board. Therefore, all measurements should be considered as nominal. Because of the temperatures involved with the thermal modification process, the color of the wood may be affected. There may also be color differences between each board as well. These differences are not considered to be defects. Some warping can occur along the length of the boards Since the FAS grading is defined by the National Hardwood Lumber Association (NHLA), knots, wane and end splitting can be found on some boards. THICKNESS (in) WIDTH (in) LENGTH (ft) 1, 1 ¼, 1 ½, 2 4, 5, 6 6 - 12, 3 - 14 optional TAN Grade Classification: Because of requests from our customers, we have developed a special lumber classification (TAN Grade). This classification is designed to maximize yield and minimize losses due to TMT ash lumber production. Utilizing the TAN Grade classification system, the raw wood passes through a multistage quality control process, as well as an inspection of all four sides prior to the final shaping the wood. A higher yield is possible due to the elimination of various defects such as splits, knots, wane, etc. The result is that Tantimber lumber, with its reduced width and thickness, is ready to be used in construction. The TAN Grade classification provides for lumber that is completely free from defects on one side with high production yields, and thus meeting the specific needs of our customers. 1 Tantimber / TMT Lumber Grading Definitions TANTIMBER TMT LUMBER GRADING DEFINITIONS Tantimber Iroko Lumber Origin: Cameroon, Africa Latin Name: Milicia Excelsa (Chlorophora Excelsa) Grade: FAS Moisture: 4 - 7% Process: Thermowood (TMT) Process Temperature: 365°F (interior) - 390°(exterior) Features: Thermowood Lumber falls into the semi-finished category, and should not be regarded as fully finished wood. Therefore, things must be considered. Due to the Thermowood process, which reduces the moisture of the wood, there tends to be a 5-7% reduction in the width and thickness of each board. Therefore, all measurements should be considered as nominal. Because of the temperatures involved with the thermal modification process, the color of the wood may be affected. There may also be color differences between each board as well. These differences are not considered to be defects. Some warping can occur 1along the length of the boards Since the FAS grading is defined by the National Hardwood Lumber Association (NHLA), knots, wane and end splitting can be found on some boards. THICKNESS (in) WIDTH (in) LENGTH (ft) 1 - 2 4 - 5 7 - 12 TAN Grade Classification: Because of requests from our customers, we have developed a special lumber classification (TAN Grade). This classification is designed to maximize yield and minimize losses due to TMT ash lumber production. Utilizing the TAN Grade classification system, the raw wood passes through a multistage quality control process, as well as an inspection of all four sides prior to the final shaping the wood. A higher yield is possible due to the elimination of various defects such as splits, knots, wane, etc. The result is that Tantimber lumber, with its reduced width and thickness, is ready to be used in construction. The TAN Grade classification provides for lumber that is completely free from defects on one side with high production yields, and thus meeting the specific needs of our customers. 2 Tantimber / TMT Lumber Grading Definitions TANTIMBER TMT LUMBER GRADING DEFINITIONS Tantimber Tulipwood Lumber Origin: North America Botanical Name: Liriodendron Tulipifera Grade: FAS (First & Selects). For more information, see our American Hardwood Grading Classification book.. Moisture: %4-7 Process: Thermowood (TMT) Process Temperature: 210°C Features: Thermowood Lumber falls into the semi-finished category, and should not be regarded as fully finished wood. Therefore, things must be considered. Due to the Thermowood process, which reduces the moisture of the wood, there tends to be a 5- 7% reduction in the width and thickness of each board. Therefore, all measurements should be considered as nominal. Because of the temperatures involved with the thermal modification process, the color of the wood may be affected. There may also be color differences between each board as well. These differences are not considered to be defects. Some warping can occur along the length of the boards Since the FAS grading is defined by the National Hardwood Lumber Association (NHLA), knots, wane and end splitting can be found on some boards. THICKNESS (in) WIDTH (in) LENGTH (ft) 1, 1 ¼, 1 ½, 2 4, 5, 6 6 - 12, 3 - 14 optional TAN Grade Classification: Because of requests from our customers, we have developed a special lumber classification (TAN Grade). This classification is designed to maximize yield and minimize losses due to TMT ash lumber production. Utilizing the TAN Grade classification system, the raw wood passes through a multistage quality control process, as well as an inspection of all four sides prior to the final shaping the wood. A higher yield is possible due to the elimination of various defects such as splits, knots, wane, etc. The result is that Tantimber lumber, with its reduced width and thickness, is ready to be used in construction. The TAN Grade classification provides for lumber that is completely free from defects on one side with high production yields, and thus meeting the specific needs of our customers. 3 Tantimber / TMT Lumber Grading Definitions TANTIMBER TMT LUMBER GRADING DEFINITIONS Tantimber Pine Lumber Origin: Scandinavia Botanical Name: Pinus Sylvestris Grade: A Grade Moisture: 4 – 7% Process: Thermowood (TMT) Process Temperature: 410°F Features: Thermowood Lumber falls into the semi-finished category, and should not be regarded as fully finished wood. Therefore, things must be considered. Due to the Thermowood process, which reduces the moisture of the wood, there tends to be a 5- 7% reduction in the width and thickness of each board. Therefore, all measurements should be considered as nominal. Because of the temperatures involved with the thermal modification process, the color of the wood may be affected. There may also be color differences between each board as well. These differences are not seen as defects. Some warping can occur along the length of the boards Consistent with the A Grade classification, common defects such as sound knots, surface and end- splits are sometimes present. Thermowood Pine is wing-knotted as a natural characteristic of the wood.. THICKNESS (in) WIDTH (in) LENGTH (ft) 1, 1 ¼, 2 4, 5, 6 10 - 19 TAN Grade Classification: Because of requests from our customers, we have developed a special lumber classification (TAN Grade). This classification is designed to maximize yield and minimize losses due to TMT ash lumber production. Utilizing the TAN Grade classification system, the raw wood passes through a multistage quality control process, as well as an inspection of all four sides prior to the final shaping the wood. A higher yield is possible due to the elimination of various defects such as splits, knots, wane, etc. The result is that Tantimber lumber, with its reduced width and thickness, is ready to be used in construction. The TAN Grade classification provides for lumber that is completely free from defects on one side with high production yields, and thus meeting the specific needs of our customer 4 .
Recommended publications
  • SEED LEAFLET No
    SEED LEAFLET No. 63 January 2002 Milicia excelsa (Welw.) C.C. Berg Taxonomy and nomenclature Uses Family: Moraceae With wood that is equivalent in value to teak, M. Synonyms: Chlorophora excelsa (Welw.) Benth., C. excelsa is one of the most important timber trees of alba A. Chev., C. tenuifolia Engl., Maclura excelsa tropical Africa. The heartwood is durable, workable (Welw.) Bureau, Milicia africana Sim, Morus and resistant to termites and marine borers. It is also excelsa Welw. extremely resistant to preservative treatments Vernacular/common names: ioko (Hausa); iroko whereas the sapwood is permeable. The gravity is (Yoruba); mvule (Swahili); rock-elm (Eng.); iroko about 0.55 g/cm3. It is mainly used for outdoor con- (trade name). struction work, furniture, boats, cabinet-work, panel- Related species of interest: the two African Milicia ling, frames and floors. species, M. excelsa and M. regia are known together The bark, its ashes, leaves and latex are used in as iroko and logging companies do not distinguish local medicine and the trees play a major role in many between the two. M. regia has a more western distri- local cultures where they are considered sacred, or bution, occurring from Senegal to Ghana. Where the parts of the tree serve ceremonial purposes. The two species overlap, hybridisation may take place. leaves are edible and are used as mulch. It is often planted as a shade tree and along roads as an Distribution and habitat ornamental. Widespread in tropical Africa from Guinea-Bissau to Mozambique where it is found in lowland rain forests Botanical description and wetter savannah woodland areas.
    [Show full text]
  • Fplgtr113.Pdf
    Abstract Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses. Keywords: wood structure, physical properties (wood), mechanical properties (wood), lumber, wood-based composites, plywood, panel products, design, fastenings, wood moisture, drying, gluing, fire resistance, finishing, decay, sandwich construction, preservation, and wood- based products On the cover: (Left to right, top to bottom) 1. Research at the Forest Products Laboratory, Madison, Wisconsin, contributes to maximizing benefits of the Nation’s timber resource. 2. Testing the behavior of wood in fire helps enhance fire safety. 3. The all-wood, 162-m (530-ft ) clear-span Tacoma Dome exemplifies the structural and esthetic potential of wood construction (photo courtesy of Western Wood Structures, Inc., Tualatin, Oregon). 4. Bending tests are commonly used to determine the engineering properties of wood. 5. Engineered wood trusses exemplify research that has led to more efficient use of wood. 6. The Teal River stress-laminated deck bridge is March 1999 located in Sawyer County, Wisconsin. 7. Kiln drying of wood is an important procedure Forest Products Laboratory. 1999. Wood handbook—Wood as an during lumber manufacturing. engineering material. Gen. Tech. Rep. FPL–GTR–113. Madison, WI: 8. Legging adhesive (photo courtesy of Air Products U.S. Department of Agriculture, Forest Service, Forest Products and Chemicals, Inc., Allentown Pennsylvania). Laboratory. 463 p. Adhesive bonding is a critical component in the A limited number of free copies of this publication are available to the performance of many wood products.
    [Show full text]
  • Prospect of Milicia Excelsa (Welw.) C
    Prospect of Milicia excelsa (Welw.) C. Berg for Multi-TreeISSN Species 1847-6481 Agroforestry. eISSN 1849-0891 Preliminary communication Prospect of Milicia excelsa (Welw.) C. Berg for Multi-Tree Species Agroforestry Alfred Ossai Onefeli 1 , Patrick Onyebuchi Agwu 1 1 University of Ibadan, Faculty of Agriculture and Forestry, Department of Forest Resources Manage- ment, Ibadan, Nigeria Corresponding author: e-mail: [email protected] Citation: ONEFELI AO, AGWU PO 2015 Prospect of Milicia excelsa (Welw.) C. Berg for Multi-Tree Species Agroforestry. South-east Eur for 6 (2): 249-256. DOI: http://dx.doi.org/10.15177/seefor.15-21 Received: 1 Mar 2015; Accepted: 1 Sep 2015; Published online: 2 Nov 2015 Abstract Background and Purpose: The population of most of our economically indigenous tree species in Nigeria is declining. Human activities and agricultural practices have been the ultimate contributors to this decrease. In order to ameliorate the conflict between agriculture and forestry, agroforestry was introduced. However, most of the practiced agroforestry is based on single tree species. Agroforestry practiced using single tree species have been reported to be ecologically staggered and therefore it is pertinent that phytosociology of trees with agroforestry potential is studied in order to improve the sustainability of human livelihood. Materials and Methods: This study was carried out in the University of Ibadan’s campus forest. The data were collected on Milicia excelsa (Welw.) C. Berg by enumerating the tree species and also by identifying and enumerating the tree species associated with the subject tree (Milicia excelsa). Statistical analysis was done using percentages, Chi-square and charts.
    [Show full text]
  • Potential of Milicia Excelsa Sawdust As
    enewa f R bl o e ls E a n Adegunloye and Asefon, J Fundam Renewable t e n r e g y Energy Appl 2018, 8:3 m a a Journal of Fundamentals of n d d n DOI: 10.4172/2090-4541.1000260 u A F p f p o l i l ISSN: 2090-4541c a a n t r i o u n o Renewable Energy and Applications s J Research Article Open Access Potential of Milicia excelsa Sawdust as Fermentation Medium for Bioethanol Production: A Preliminary Study Adegunloye DV* and Asefon EO Department of Microbiology, Federal University of Technology, Akure, Nigeria *Corresponding author: Adegunloye DV, Department of Microbiology, Federal University of Technology, PMB 704, Akure, Nigeria, E-mail: [email protected] Received date: April 30, 2018; Accepted date: May 04, 2018; Published date: May 11, 2018 Copyright: © 2018 Adegunloye DV, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited. Abstract The potential Milicia excelsa sawdust as both fermentation medium and substrate for bioethanol production was investigated. Fermentation of the sawdust was carried out for 120 hours. Three liters of distilled water was added into 500 g of sterilized and unsterilized samples (sawdust) respectively with the addition of 4.5 g of Saccharomyces cerevisiae (yeast) and fermentation was terminated every 24 hrs. Microbial population and organisms responsible for the fermentation were determined using standard microbiological technique. Temperature, pH and total titratable acidity of the substrates were monitored daily for 120 hrs.
    [Show full text]
  • Evaluating Mukau Wood.Pdf
    Mukau wood, with “flames”. (Photo: Jan Vandenabeele) Mahogany from DR Congo. (Photo: KEFRI) Evaluating mukau wood Looking at the properties of Melia volkensii, compared to mahogany, teak and mvule BY NELLIE ODUOR elia volkensii is an indigenous last decade, owing to a shortage of alternative Texture and grain tree species in the plant hardwood species. The Kenya Forestry Research Texture describes the relative size of vessels in family Meliaceae. Its common Institute (KEFRI) has led the way in developing the wood. It affects the resistance of the timber names include mukau (Kamba propagation, establishment and management to abrasion, and to some extent, the quality of / Mbeere / Embu / Meru), techniques for Melia since the 1990s. the machined and polished surface finish. The mpendaM bure (Swahili), kirumbutu (Taita) and Through on-station and on-farm research, texture of Melia is coarse which means it has boba (Somali). Melia grows naturally in the semi- several techniques of establishing and managing large and widely spaced vessels, which are arid zones of Ethiopia, Somalia, Tanzania and the tree have been realised. As a result, tree visible to the naked eye. Melia’s texture is the Kenya. growers are now striving to grow Melia as a same as that of mahogany, teak and mvule. The species is common in deciduous plantation species. The grain is the alignment of cells relative to bushland in association with Acacia-Commiphora the axis of the tree or the longitudinal edge of vegetation in agro-ecological Zones IV - V (arid Comparison with other well known species an individual piece of sawn timber.
    [Show full text]
  • PRICE LIST for SEEDLINGS 2017/18 Species Common Or Local Name Price/ Seedling (Ushs)
    10/20 Spring Road Tel: 041286049 PO Box 70863 041 230365/6 Kampala, Uganda Fax: 0414 230369 www.nfa.org.ug [email protected] NATIONAL TREE SEED CENTRE PRICE LIST FOR SEEDLINGS 2017/18 Species Common or local name Price/ seedling (Ushs) Timber spps /Medicinal 1 Afzelia africana Afzelia, Meli, Beyo 1,000 2 Albizia coriaria Mugavu, Musisa, Atek 500 3 Albizia chinensis Falcata. 500 4 Antiaris toxicaria False mvule, Kirundu, Elwa, Muhere 1,000 5 Antiaris toxicaria (5'' pots) False mvule, Kirundu, Elwa, Muhere 1,000 6 Bathedavia (5''pots) Exotic mvule 1,000 7 Bathedavia ( 3''pots) Exotic mvule 400 8 Cedrella odorata Stink wood,Kawunyira, 300 9 Colla gigantia 1,000 10 Cordia africana Mukebu,Gukyigili 1,000 11 Entandrophragma utile Budongo mahogany, Mukusu 1,000 12 Eucalyptus grandis Kalitunsi,Kalitusi, Rose gum 200 13 Eucalyptus camaldulensis 150 14 Eucalyptus grandis (Origin South Africa) Kalitunsi,Kalitusi, Rose gum 300 15 Gmelina arborea Melaina 1,000 16 Khaya anthotheca Red Mahogany, Munyama (small pot) 500 17 Maesopsis eminii Musizi 500 18 Markhamia lutea Nsambya, Emiti 500 19 Melia volkensii Giant lira 300 20 Milicia excelsa( 4"Pots) Iroko, Mvule, Elua, Mutumba 500 21 Milicia excelsa( 5"Pots) Iroko, Mvule, Elua, Mutumba 1,000 22 Pinus caribaea Var hondurensis F1 Caribean pine( imported)Brazil 400 23 Pinus caribaea Var hondurensis F2 Caribean pine( imported)Brazil 450 24 Pinus caribaea Var hondurensis Caribean pine( imported)Brazil (big pot) 1,000 25 Pinus oocarpa ( Imported) Pine 450 26 Tamarindus indica Tamarind, Mukoge, Muhungwa, Chwaa 1,000 27 Tectona grandis Teak 1,000 28 Tectona grandis (shoots) Teak 300 29 Terminalia superba Umbrella tree 300 Medicinal 30 Annona murica Ekitafeeri, Soursop 5,000 40 Azadirachta indica Neem(small pot ) 350 50 Prunus africana Redstinkwood, Ntasesa,Chiramat,Musubo 1,500 60 Prunus africana (5'' Pots) Redstinkwood, Ntasesa,Chiramat,Musubo 3,500 70 Warburgia Ugandensis 3,500 Agroforestry spps 71 Albizia chinensis Falcata.
    [Show full text]
  • DNA Taxonomy in the Timber Genus Milicia:Evidence of Unidirectional Introgression in the West African Contact Zone
    Tree Genetics & Genomes (2017) 13:90 DOI 10.1007/s11295-017-1174-4 ORIGINAL ARTICLE DNA taxonomy in the timber genus Milicia:evidence of unidirectional introgression in the West African contact zone Kasso Daïnou1,2,3 & Jean-François Flot3 & Bernd Degen4 & Céline Blanc-Jolivet4 & Jean-Louis Doucet5 & Ludivine Lassois5 & Olivier J. Hardy3 Received: 30 September 2016 /Revised: 7 July 2017 /Accepted: 13 July 2017 # Springer-Verlag GmbH Germany 2017 Abstract DNA-based techniques are helpful in characterising found that SNPs yielded results more consistent than SSRs; out- hybridisation patterns in plant species. To be efficient in puts from the Bayesian and maximum-likelihood analyses dif- disentangling species boundaries and interspecific gene flow, it fered significantly using the SSRs, whereas they were perfectly is recommended to combine various methodologies and types of congruent using SNPs. A proportion of 12.4% hybrids were markers. Here, we used different analytical tools (algorithms im- detected amongst the SNP genotype samples. A haploweb anal- plemented in Structure, Tess, NewHybrids and HIest, and the ysis of At103 gene sequences confirmed the existence of inter- haploweb approach) and three nuclear genetic markers (7 nuclear specific hybrids. There was also a clear evidence of advanced simple sequence repeat loci (SSRs), 62 single-nucleotide poly- generations of hybrids (backcrossed individuals) but only to- morphism loci (SNPs) and a single-copy gene region, At103)to wards M. regia. Although more investigation is required for un- revisit hybridisation patterns in the commercially important derstanding the mechanisms responsible for this asymmetric in- African tree genus Milicia. Samples were collected in the natural trogression, we suggest that it may be due to the differences in ranges of Milicia regia and Milicia excelsa in West Africa.
    [Show full text]
  • Agroforestry and Biodiversity
    sustainability Article Agroforestry and Biodiversity Ranjith P. Udawatta *, Lalith M. Rankoth and Shibu Jose The Center for Agroforestry, School of Natural Resources, University of Missouri, Columbia, MO 65211, USA; [email protected] (L.M.R.); [email protected] (S.J.) * Correspondence: [email protected] Received: 5 April 2019; Accepted: 16 May 2019; Published: 21 May 2019 Abstract: Declining biodiversity (BD) is affecting food security, agricultural sustainability, and environmental quality. Agroforestry (AF) is recognized as a possible partial solution for BD conservation and improvement. This manuscript uses published peer-reviewed manuscripts, reviews, meta-analysis, and federal and state agency documents to evaluate relationships between AF and BD and how AF can be used to conserve BD. The review revealed that floral, faunal, and soil microbial diversity were significantly greater in AF as compared to monocropping, adjacent crop lands, and within crop alleys and some forests. Among the soil organisms, arbuscular mycorrhizae fungi (AMF), bacteria, and enzyme activities were significantly greater in AF than crop and livestock practices. Agroforestry also creates spatially concentrated high-density BD near trees due to favorable soil-plant-water-microclimate conditions. The greater BD was attributed to heterogeneous vegetation, organic carbon, microclimate, soil conditions, and spatial distribution of trees. Differences in BD between AF and other management types diminished with time. Evenly distributed leaves, litter, roots, dead/live biological material, and microclimate improve soil and microclimate in adjacent crop and pasture areas as the system matures. Results of the study prove that integration of AF can improve BD in agricultural lands. Selection of site suitable tree/shrub/grass-crop combinations can be used to help address soil nutrient deficiencies or environmental conditions.
    [Show full text]
  • Cameroon, Ivory Coast • Asia: China, India • East Asia: Indonesia, Malaysia JAMES LATHAM DDS
    WWF –UK Forest Campaign James Latham has signed up to the WWF –UK Forest Campaign committing to a 2020 target of purchasing only timber that has been independently certified as coming from legally and sustainably managed forests. 03.03.2013 EUTR implementation SUSTAINABLITY LEGALITY • North America: USA, Canada • South America: Brazil, Uruguay, Paraguay • Europe (outside EU): Russia • Africa: Ghana, Congo Brazzavile, Cameroon, Ivory Coast • Asia: China, India • East Asia: Indonesia, Malaysia JAMES LATHAM DDS CAMEROON • Lathams DDS • Country model • Risk assessments and mitigations Cameroon country model • Legality and corruption: CPI 27, Worldwide Governance Indictor, Global transparency index • Conflict timber: Not associated with conflict timber • FLEGT (VPA) licence: NOT available, The VPA is signed and is currently being implemented (no FLEGT licenses yet) • Timber sanctions from UN/ EU: No bans • Harvest ban on species: NONE • Export bans on logs: Acajou (Khaya anthotheca), afrormosia/assamela (Pericopsis elata), aningre (Aningeria altissima), bete (Mansonia altissima), bosse (Guarea cedrata), bubinga (Guibourtia tessmanii), dibetou (Lovoa trichiliodes), douka (Tieghemella heckelii/africana), doussie (Afzelia bipidensis), fromager (Ceiba pentandra), ilomba (Pycnanthus angolensis), iroko (Milicia excelsa), longhi (Gambeya spp.), moabi (Baillonella toxiperma), movingui (Distemonanthus benthamianus), ovengkol (Guibourtia ehie), padouk (Pterocarpus soyauxii), pao rosa (Bobgunnia fistuloides), sapelli (Entandrophragma cylindricum), sipo
    [Show full text]
  • AFRICAN TEAK Patented Invisible Profile with No Open Gaps, Screwless Installation Patented Magnet System with 100% Accessible Boards
    & Arguably best decking available with two patented innovations AFRICAN TEAK Patented invisible profile with no open gaps, screwless installation patented magnet system with 100% accessible boards. Wood Features EXTERPARK’S FINE MANUFACTURING Botanic Name All exterpark raw materials are kiln dried to achieve balance humidity level of 15-18% in individual Chlorophora excelsa processes which may last from one week to a month depending on current humidity contents and Milicia excelsa actual wood specie. Such balance humidity level is key to a good perfomance when interacting with changing outdoor weather conditions. All african teak boards are produced in 30cm increments. Commercial Name All double joists will be laid at 30cm span and all short end connections will be clipped down. African Teak; Iroko That will be the most possible solid platform for a long service life and performance of the product. Location PHYSICAL AND MECHANICAL PROPERTIES OF AFRican TEAK West Africa Contraction Coefficient. Volumetric 10% (0.33-0.44) Wood Fitness Tangential: 5.5-5.8% (0.25-0.28) Hard and dense wood type which is Radial: 3.5-3.7% (0.13-0.19) stable and suitable for total outdoor Static Bending. 96-120 N/mm² exposure Elasticity Module. 9.500 - 13.000 N/mm² Axial Compression. 50-70 N/mm² Hardness Shear. .7.0-12.4 N/mm² Hard Durability. .resistant against the action of fungus , termites and xylophagi FINISHING Grain Straight Exterpark boards can be pre-oiled at our factory • Full protection of board on all sides Colour • No concern about exposure to humidity during fit out yellow-brown (will fade to silver grey • Gain in stability and durability if exposed to U.V.
    [Show full text]
  • Assessment of Timber Species Availability in Selected Sawmills and Timber Markets in Kogi State, Nigeria
    Awe et al., 2019 Journal of Research in Forestry, Wildlife & Environment Vol. 11(3) September, 2019 http://www.ajol.info/index.php/jrfwe jfewr ©2019 - jfewr Publications 239 E-mail:[email protected] This work is licensed under a Creative Commons Attribution 4.0 License ISBN: 2141 – 1778 Awe et al., 2019 ASSESSMENT OF TIMBER SPECIES AVAILABILITY IN SELECTED SAWMILLS AND TIMBER MARKETS IN KOGI STATE, NIGERIA *Awe, F.; Kolade, R.I. and Ogunsola, A.J. Forest Economics and Extension Department, Forestry Research Institute of Nigeria, P.M.B. 5054, Jericho Hills, Ibadan, Oyo State, Nigeria. *Corresponding author email: [email protected]; +2348055232165 ABSTRACT This paper assessed the availability of timber species in Okun Area, Kogi West Senatorial District of Kogi State, Nigeria. One hundred copies of structured questionnaire were randomly administered to timber sellers from six selected timber markets and sawmills from two randomly selected Local Government Areas (LGAs) the State .Four timber markets were selected from Ijumu LGA and two from Kabba-Bunu LGA, making a total of six timber markets. Descriptive statistics such as frequency and percentage distributions as well as content analysis were used to analyse the collected data. Study revealed that 21% of the timber dealers were more than 50 years of age, with about 69% of them having been in business for 20 years and above. Different reasons were given by respondents on why they engage in the timber business and these include availability, durability and demand, with 40% of them citing the demand for the timber species as the reason why they traded the species.
    [Show full text]
  • Characteristics and Availability of Commercially Important Woods Regis B
    Chapter 1 Characteristics and Availability of Commercially Important Woods Regis B. Miller hroughout history, the unique characteristics and Contents T comparative abundance of wood have made it a natural material for homes and other structures, furniture, tools, vehicles, and decorative objects. Today, for Timber Resources and Uses 1–2 the same reasons, wood is prized for a multitude of uses. All wood is composed of cellulose, lignin, hemicelluloses, Hardwoods and Softwoods 1–2 and minor amounts (5% to 10%) of extraneous materials Commercial Sources of Wood Products 1–2 contained in a cellular structure. Variations in the characteris- tics and volume of these components and differences in cellu- Use Classes and Trends 1–3 lar structure make woods heavy or light, stiff or flexible, and hard or soft. The properties of a single species are relatively Species Descriptions 1–3 constant within limits; therefore, selection of wood by spe- cies alone may sometimes be adequate. However, to use U.S. Wood Species 1–3 wood to its best advantage and most effectively in engineer- ing applications, specific characteristics or physical properties Hardwoods 1–3 must be considered. Softwoods 1–10 Historically, some species filled many purposes, while other less available or less desirable species served only one or two Imported Woods 1–17 needs. For example, because white oak is tough, strong, and durable, it was highly prized for shipbuilding, bridges, Hardwoods 1–17 cooperage, barn timbers, farm implements, railroad crossties, fence posts, and flooring. Woods such as black walnut and Softwoods 1–33 cherry were used primarily for furniture and cabinets.
    [Show full text]