Electric Strikes Fail Locked F2164 F2 Series Fire Rated Offset and Centerline Entry

In or Out... we make it Easy!® ®

Deadbolt Dimensions Plug ANSI 1-1/4”W x 4-7/8”L Adjustable (31.8mm x 123.0mm) Deadbolt Keeper ‘Saw-tooth’ Adjustable Adjustment Deadlatch Locator ‡ Ramp

Optional ‘Plug-in’ Features Latch Monitor ‡

• Modular design allows compatibility with most locks without having to order special faceplates ‡ Patent Pending Features • Adjustable deadbolt keeper and deadlatch ramp F2164 Fire Rated Offset • Heavy-duty stainless steel construction with Certifications &Testing 32D finish (Brushed stainless steel) and Centerline Latch Entry • UL 10C, 3 hour fire-rated (fail secure only) • Up to 1500 lbs (680 kg) holding force • UL 1034, burglary-resistant listed This unique, versatile, “all-in-one”, fire • Factory tested to meet ANSI/BHMA 156.31 • Fits HES 1006 (1003) frame cutout rated electric strike combines strength, for strength and endurance • Accommodates ¾” latch projection (1500 lbs holding force) convenience, • Factory tested to exceed 2,000,000 cycles (everything you need is in the box) and • Faceplate and screws included for in an attractive, sleek, easy to install centerline latch entry design. • Unique sliding shim design for up to 1/8” (3mm) horizontal adjustment for What makes this strike unique is the “Saw-tooth Adjustment Locator” design misaligned frames ‡ that allows the installer to move the Accessories • Vertical Adjustability of strike for precise deadbolt keeper, or deadlatch ramp F2LM – Latch Monitor Kit positioning of vertically to align with a wide variety of • Accommodates up to 1” deadbolt* mortise locks with offset latches. There’s The Latch Monitor Module has a SPDT switch. This module can be mounted anywhere in the • Field selectable voltage input – no need to order special faceplates, you can adjust the strike to work with any strike cavity to correspond to Latch position. Accommodates 12 or 24VDC and Note: F2LM is rated at 2 Amps @ 24VDC 12 to 24VAC . Everything you need is in the box, including a faceplate for • Anti-tamper security screws centerline latch entry. Frame & Lock Type • Hex and security driver bit included We make installation easy. Our unique • Optional “Plug in” Latch Monitor kit sliding shim design adjusts vertically on • Low current draw (0.19 Amps @24VDC) the keeper to align with any latch loca- tion to give you up to 1/8” horizontal • “Cool Keeper” Solenoid design prevents adjustment. We also include a trim plate keeper from heating up for messy frame cuts, a hands-free adhe- • Plug-in wire connector sive template - all the drivers you need Hollow Metal Aluminum Wood to install the strike. • Trim plate included Cylindrical Mortise • Adhesive paper template included Our unique “plug-in” latch monitor switch option can be added in the field if • Non-handed you decide monitoring is required after • 5 Year Limited Warranty installation. Don’t buy another strike... Mortise Exit Device * Night-latch function only, bolt will not release Just order the F2LM and plug it in!

ZLF2 ©2012 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM R06/12TR USA: 2517 SQUADRON COURT, SUITE 104, VIRGINIA BEACH, VA 23453 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6 PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-MAIL: [email protected] Specifications F2164

In or Out... we make it Easy!® ®

Technical Specifications Model Mode Voltage Duty Sound Amps* Ohms†

F2164 Fail Locked 12 VDC Continuous Silent .375 37

F2164 Fail Locked 24 VDC Continuous Silent .190 148

F2164 Fail Locked 12-24 VAC Intermittent Buzz .280 - .565 37

Intermittent Duty = Energized less than 1 min. with Duty Ratio 1:5 Continuous Duty = Energized 1 min. or more * Ratings are based on maximum current draw at +10°C and include initial power-up current draw. † Nominal resistance at +25°C ± 7% tolerance.

1-1/4” (31.8 mm)

3/4” (19.6 mm) 3/8” (9.0 mm) 4-5/8” (116.0 mm)

4-1/8” (105.0 mm) 3-3/8” (85.1 mm)

4-7/8” (123.0 mm) 3-1/4” (83.7 mm) 3-1/8” (79.8 mm)

5/8” (15.9 mm) 1-5/8” (42.0 mm) FACEPLATE FOR OFFSET LOCKS 1-1/4” (31.8 mm) 3/8” (9.0 mm)

1-5/8” (41.0 mm) 1-3/8” (36.5 mm) 1-3/4” (46.0 mm) 4-1/8” (105.0 mm)

1/4” (5.8 mm) 4-7/8” (123.0 mm) 1-1/2” (38.0 mm)

Certifications/Listings UL1034 Listed – Burglary Resistant UL10C Listed – 3 Hour Fire Rated

NOTE: Not to scale. Specifications are subject to FACEPLATE FOR change without notice. CENTERLINE LOCKS 5/8” (15.9 mm) (included)

RCI also offers a complete line of Electromagnetic Locks, Electric Locks, Power Supplies, Switches, Keypads & Readers, Exit Devices, Systems & Hardware.

©2012 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM USA: 2517 SQUADRON COURT, SUITE 104, VIRGINIA BEACH, VA 23453 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6 PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-MAIL: [email protected]