SDC Catalog Section: 1.3 Locking Devices

ACCESS & EGRESS LOCKING DEVICES SOLUTIONS 1.3 Electric Strikes

5 6

4 3 2 1

The lock behind the system SDCSecurity.com 800.413.8783 [email protected] Standalone Complete ComponentConsiderations 3 • ADACompliantSolutions • Emergency DoorRelease • ExitSenseBar • PIREgress Sensor • ExitSwitch 1. EgressDevice 2 • Card Reader • DigitalKeypad • Keyswitch Standalone orNetwork AccessControl 2 4 7 8 1 Entry Check™ Entry 920PW 422U 3 Auto EntryControl™ 463U IP-based Access Control Access IP-based 3 3 474U IP Pro IP Egress PIR MD31D PIR Egress 2 5 6 Mains AC Bollard Post Dual Switch CBC484A4U Entry Check™ Entry SDC SECURITY DOORCONTROLS 918 Electra Pro™ Z7200 Pro™ Electra • MagneticLock • FrameActuatorLockset • ExitDevice • ElectrifedLockset • ElectricBoltLock • DelayedEgress Lock • ElectricStrike LockingDevice 1 Selectric Pro™ Z7800 Pro™ Selectric EMLock Sure Exit Sure 1650 lbs 1650 ® Push Plate Switch Push Plate Mullion Narrow 484A1U 1511 ® PSB560 EntryCheck™ & 924P 484O1U • Electric Mortise • HiTower • Mortise Electric • Alarm Exit • Egress Delayed • Dogging & Retraction Latch Dual • Spectra Delayed Egress Lock Egress Delayed Exit Check™ 1511s Check™ Exit ■ WWW.SDCSECURITY.COM HiShear ® 6000 Spacesaver ® 1565 - 2700 lbs 2700 - 1565 482A6U 492 Emergency 492 Door Release Door ® 1091A Keyswitch UniFLEX™ 55 UniFLEX™ 704U ® Actuator IP Network AC Mains

41. Power Transfer Devices 2 5 Required With Locksets & Exit Devices • Electric Power Hinge • Power Transfer Loop • Concealed Power Transfer 3 PTH-4 PTH-10 PTM-2 1 PT-2U PTM-10

55. Power Supply & Door Controller PC Managed Network • 12/24VDC, Class 2 • Fire release input • System Status LED’s • Multiple Fused Outputs • Multiple Relay Confgurations • Universal Programmable Controllers 2 3

602RF 1 Amp FB-4: 4 Fused 631RF 1.5 Amp Outputs 632RF 2 Amp 634RF 4 Amp 636RF 6 Amp

UR2-4 & UR4-8: CR4: 4 Fused 7 Selectable Systems Relay Outputs 7 Selectable Relay Modes

6 Remote Controls

WRC-2B

RCC WRC-R2 TCC

5.7 Annunciators EA100 101-4AM 101-1A

8 Accessories & Misc • Magnetic Door Holder Release Device PIR MD31D-W

EH20 EH40 3 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM Security Door Controls Locking Devices 1

Electric Strikes

An SDC electric strike enables the electrical release of a locked mechanical latch or bolt. Compatible with any access control, SDC electric door strikes are available in a variety of configurations to accommodate several types of mechanical locksets and door and frame styles.

58 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM LockingElectric Strikes Devices 15 Series Electric Strike

The SDC 15 Series Electric Strike is a Centerline Latch Entry* strike designed for use with Cylindrical lockset with up to ¾” (19mm)) throw latchbolts. The 15 series electric strikes incorporates all stainless steel deadlocking mechanism and an internally mounted solenoid.

*Centerline Latch Entry: The latch must enter at the strike “Centerline” located exactly between the top and bottom of the strike faceplate. Refer to strike installation instructions and template to determine strike location prior to frame preparation for New and Retrofit installations.

Not recommended for wood applications.

CYLINDRICAL LOCK FEATURES • For use with 5/8’’ latchbolt, or up to 3/4’’ latchbolt with 1/8’’ door gap Latch & • Choice of failsafe or failsecure strike • Non-handed centerline • All stainless steel parts with durable die case body for corrosion resistance’ • 630 Satin stainless steel face plate • Screw terminals

INSTRUCTIONS MODEL 15-4S24U Failsecure, 24VDC continuous; 1-5/8" 1-3/4" 15-4F24U Failsafe, 24VDC continuous 15-4SU Failsecure, 12VDC continuous 1-17/32" 1-5/32" 7/64" 15-4FU 3/8" Failsafe, 12VDC continuous

SPECIFICATIONS 3-11/32" 1-11/64" 4-7/8" Voltage 150 mA @ 24VDC 200 mA @ 12VDC Dimensions 1-1/4’’ W x 4-7/8’’ H x 1-1/2’’ D Weight 2.0 lbs 3/8" 7/8" 1-1/4" YEAR POWER

W DATA A5 TY RRAN 59 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM APPLICATION Electric Strikes

AC IP Network Mains

920 Wiegand IPPro IP-based IPRW Access Control Access Control Keypad or Reader Controller see page 155 see page 147 and page 151

602RF 1 Amp, 12/24 VDC Class 2 Output Power Supply see page 239

60 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM LockingElectric Strikes Devices 25 Series Electric Strike

The SDC 25 Series Electric Strike is a Centerline Latch Entry* strike designed for use with Cylindrical lockset with up to 5/8” (15mm) throw latchbolts. The compact low profile design with an internally mounted solenoid and factory supplied mounting tabs enable quick and easy installation where jamb space is limited. The heavy duty construction makes the 25 Series ideal for high traffic installations.

Not recomended for wood applications.

FEATURES • Fail-Secure, reversible for failsafe CYLINDRICAL LOCK operation • For 1/2” latch or 5/8” latch with 1/8” door gap Latch & • Latch status output strike centerline • Non-handed, reversible • All stainless steel parts with durable diecast body for corrosion resistance • 630 Stainless steel standard finish

INSTRUCTIONS MODEL 25-4U 4-7/8” (124mm) faceplate for aluminum, and 1-9/16" 1-23/32" hollow metal frames.

ACCESSORIES 1-9/32" 1-1/16” RMB Buzzer 12/24V AC/DC operation 7/64" BR64XL Rectifier for AC operation 3/8"

SPECIFICATIONS

Input 200/100 mA @ 12/24VDC 3-5/16" 1-3/4" 4-7/8" Latch Status SPDT, 3 Amp @ 30VDC Dimensions 1-1/4’’ W x 4-7/8’’ H x 1-1/4’’ D Weight 2.0 lbs

3/8" FIELD YEAR POWER 12 24 1-1/4" S 11/16" E E W DATA L L A5 TY ECTAB RRAN 61 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM Electric Strikes

62 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM LockingElectric Strikes Devices 30 Series Electric Strike

he SDC 30-4 Series electric strike is designed for use with rim mount Texit devices having pullman type latchbolts or the top pullman latch of a surface vertical-rod exit device.

FEATURES • All stainless steel for corrosion thickness (3/4" to 1/2") resistance and strength • In-frame horizontal adjustability • Tamper resistant, heavy-duty • Pullman keeper construction • Non-handed, reversible • Set screws for adjustment lockdown • Failsecure (standard) Failsafe (optional) • Milled ramps to better accommodate deadlatches • ¾” keeper depth • Integrated shim for quick • Static strength 1,500 lbs. customization of faceplate • Dynamic strength 70 ft-lbs.

PRODUCT SKU SAMPLE: 30-4-12 U HOW TO ORDER 1/4" SHIM STANDARD

1| SPECIFY MODDEL 2| SPECIFY FINISH 1/2" 30-4-12 electric strike U 630 Stainless Steel (standard) 12VDC Electric Strike with 0.75” 1/4" faceplate. Faceplate is 0.5” without 1/4” spacer 3| SPECIFY OPTIONS 30-4-24 electric strike FS Failsafe operation 24VDC Electric Strike with 0.75” LBM-30 Latchbolt Monitor faceplate. Faceplate is 0.5” LCM-30 Locking Cam Monitor without 1/4” spacer. BR64XL Rectifier for AC operation

SPECIFICATIONS

Voltage 510 mA @ 12VDC Faceplate 250 mA @ 24VDC Spacer Dimensions 9’’ H x 1-3/4’’ W, 1 23/32” D

Weight 2.0 lbs

• CAN4-S104 (ULC-S104) fire door conformant Grade YEAR • DOD approved

C W O T Y • New York City accepted N A5 T 1M PLIA RRAN 63 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM Electric Strikes

64 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM LockingElectric Strikes Devices UniFLEX™ 45 Universal Electric Strike/Door Release

The SDC UniFLEX Electric Strike is Centerline Latch Entry* strike designed for use with Cylindrical and Mortise locksets with up to ¾” (19mm) throw latchbolts.. The quality construction makes the 45 series ideal for high traffic applications. The compact low profile design enables quick and easy installation where jamb space is limited. *Centerline Latch Entry: The latch must enter at the strike “Centerline” located exactly between the top and bottom of the strike faceplate. Refer to strike installation instructions and template to determine strike location prior to frame preparation for New and Retrofit installations. See SDC 45-4S 45-4R 45-6R 45-7R strike template and installation instructions for both retrofit ™ and new installation details. UniFLEX 45-A Multi-Application strike with FEATURES three faceplates for wood, aluminum and hollow metal • Centerline Electric Strike • Field selectable failsecure - failsafe frames • 4 Interchangeable Application • Field selectable voltage Faceplates • ¼” Horizontal alignment adjustment • Full Monitoring is Standard, • Low profile, 1-3/16” deep Including: Latched and Unlatched Status, Keeper Closed and • Plug-in wire connectors Deadlocked, or Unlocked • Mounting tabs 4S 4R 7R • Keeper Open Status Optional • Non-handed • Reversible Failsafe/Failsecure, no • All stainless steel parts with disassembly durable die cast body for corrosion • 1/4” Horizontal Alignment Adjustment resistance Strike Fewer moving parts for maximum life center 1.75" Max • Plated Architectural Finishes • 1.75" Max line Available • Stainless steel standard with square • For 5/8” latch or 3/4” latch with 1/8” corner faceplate door gap • Aluminum standard with radius • Latch position status standard corner faceplate • ANSI/ BHMA A156.31, Grade 2 Cylindrical • Keeper closed & deadlocked/ lock & unlocked status standard strike center line MODEL 45-4S 4-7/8" x 1-1/4" square corner faceplate 45F-4S Identical design to the 45 Strike, but made 45-4R 4-7/8" x 1-1/4" radius corner faceplate completely out of Stainless Steel so that 45-6R 6-7/8" x 1-1/4" radius corner faceplate it can withstand fire. Has been tested and 45-7R 7-15/16" x 1-7/16" radius corner faceplate rated to be considered a Grade 1 strike. Grade

45-A Included: One 4-7/8" square corner faceplate C T Call factory for faceplate avalability with this strike O1M N PLIA One 4-7/8" radius corner faceplate or check our website SDCsecurity.com One 7-15/16" radius corner faceplate FIELD YEAR POWER 12 24 S E E W DATA L L A5 TY ECTAB RRAN 65 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM SPECIFICATIONS INSTRUCTIONS Electric Strikes Electrical 1 3/16" Dual Voltage Coil 200/100mA @ 12/24V DC Depth Move screw 140/70mA @ 12/24V AC to change locking mode Latch Position Status (std) SPDT, Dry 3Amp @ 30V

Keeper Closed & Locked SPDT, Dry 3Amp @ 30V Status (std)

Keeper Open/Closed SPDT, Dry 3Amp @ 30V Failsecure Failsafe Status (optional) Dimensions 45 SERIES DIMENSIONS

45-4S / 45-4R 1-1/4” W x 4-7/8” H x 1-3/16” D

45-6R 1-1/4” W x 6-7/8” H x 1-3/16” D 1-11/16" 1-27/32" Dimension dependent on 45-7R 1-7/16” W x 7-15/16” H x 1-3/16” D model ordered Weight 2.0 lbs

1-13/64" 1-1/4" 7/64"

PRODUCT SKU SAMPLE: 45-4S U HOW TO ORDER 3/8"

1| SPECIFY MODDEL 3-3/8" 1-1/2" 45-4S 4-7/8" x 1-1/4" square corner faceplate 45-4R 4-7/8" x 1-1/4" radius corner faceplate 45-6R 6-7/8" x 1-1/4" radius corner faceplate 45-7R 7-15/16" x 1-7/16" radius corner faceplate 45-A Included: One 4-7/8" square corner faceplate One 4-7/8" radius corner faceplate 3/8" One 7-15/16" radius corner faceplate 7/8" 45F-4S Stainless Steel strike (fire rated) with 4-7/8” x 1-1/4” square corner faceplate

Latch Position Status Standard Keeper Closed and Deadlocked/Unlocked Status Standard 2| SPECIFY FINISH

U 630 Dull Stainless Steel (standard with 45-4S) V 628 Dull Aluminum (standard with 45-4R, 45-6R and 45-7R) Y 335 Black Anodized D 606 Dull Brass H 613 Oil Rubbed Bronze

3| SPECIFY OPTIONS

K Keeper open/closed status RMB Buzzer 12/24V AC/DC operation

66 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM LockingElectric Strikes Devices UniFLEX™ 55 Series Universal Application Strike

For New or Retrofit Construction. Retrofits Existing ANSI 4-7/8” Strike Prep – No Centerline Relocation

UniFLEX™ 55 Series heavy duty electric strikes are designed for installation 55-A in hollow metal frames for access control of cylindrical and mortise locksets and mortise exit devices. The choice of 6 application faceplates eliminates the need for centerline relocation, making them ideal for new or retrofit , high security access control applications.

FEATURES • No Centerline Relocation • 70 ft-lb Dynamic strength • Up to ¾” Latchbolt and • Internally Mounted Solenoid, 1” Deadbolt No Heat in Keeper • Field Reversible, Failsafe/ • Dual Voltage 12/24VDC Failsecure • Tamper Resistant • 1/8” Horizontal alignment • All Stainless Steel Corrosion adjustment Resistant Parts and Heavy Cast 55-B & 55-C 55-D & 55-E 55-F • ANSI/BHMA A156.31 Grade 1 Body and Keeper • Factory tested 2500 lbs, exceeds • Non-handed (Deadbolt status UniFLEX™ Universal Strike 1,000,000 cycles handed) 55-ABC • UL tested 1500 lb Static strength • Plug-in pig tail connectors

REVERSIBLE FAILSAFE/FAILSECURE Failsecure (Power-to-Unlock): Failsafe (Power-to-Lock): Unlocked when energized. Locked Locked when energized. Unlocked when de-energized and during when de-energized and during power failure. power failure.

Application: For non fire rated and Application: Non-fire rated doors fire rated doors (exception, may not only be used on stairwell doors). May not be maintained in the unlocked CAUTION: Failsafe is not permitted (energized) state when used with with the UL Fire Door Accessory APPLICATION 55-ABC Universal Strike for cylindrical locks, fire rated doors. label. mortise locks without deadbolts and mortise exit devices, including:

MODELS SDC Corbin Marks Accurate Russwin Sargent 55-ABC UniFLEX™ Universal Strike Arrow Dorma Schlage (includes A, B and C faceplates and strike body) Baldwin Falcon Yale 55-A, 55-B, 55-C, 55-D, 55-E, 55-F Best Hager

UniFLEX™ Spec with specific faceplate includes strike body (see page page 69 for application)

FIELD YEAR 12 24 S E E W L L A5 TY ECTAB RRAN 67 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM SPECIFICATIONS

Electric Strikes Electrical

Dual Voltage Power Input 600/300 @ 12/24V DC

Contacts SPDT, Dry, 5Amp @ 30V

Weight 3.0 lbs

PRODUCT SKU SAMPLE: 55-D U DBM-L HOW TO ORDER

1| SPECIFY MODDEL 2| SPECIFY FINISH U 630 Stainless Steel (std) 55-A Compatible locks with all cylindrical locksets D 606 Dull Brass with up to 5/8” latch. G 612 Dull Bronze 55-B Mortise locksets and exit mortise devices H 613 Oil Rubbed Bronze with or without a deadlatch located below the P 625 Bright Chrome latchbolt. Q 626 Dull Chrome Accurate, Arrow, Best, Corbin Russwin, Dorma, Falcon, Marks, Sargent, Yale. 3| SPECIFY MONITORING OPTIONS 55-C Mortise locksets and mortise exit devices with or without a deadlatch located above the LBM Latchbolt Monitor. Signals the door latchbolt. is closed and latched or unlatched SDC, Schlage, Baldwin, Hager and open. Non-handed. 55-D Mortise locksets with a deadbolt and deadlatch LBM/ Door Secure Monitor. Signals door located below the latchbolt. LCM is closed latched and the keeper is Accurate, Arrow, Best, Corbin Russwin, Dorma, deadlocked. Also signals the door is Falcon, Marks, Sargent, Yale. unlatched or unlocked. Non-handed. 55-E Mortise lockset with deadbolt and no deadlatch feature. Baldwin 3| SPECIFY DEADBOLD MONITORING (AVAILABLE ONLY FOR 55-D, 55-E, 55-F) 55-F Mortise locksets with a deadbolt and a deadlatch located above the latchbolt. DBM-L Deadbolt Monitor, Left Hand SDC, Schlage, Hager. DBM-R Deadbolt Monitor, Right Hand

ACCESSORIES

50-RMB Plug-In Buzzer, 12/24V Indicates failsecure BR64XL strike is energized and Rectifer with ire Leads unlocked Converts AC to DC

50-BR64 Plugin Bridge Rectifer Connects AC to DC

50-PC3A (1) 12 V and (1) 24V pigtail connector, 4” leads (supplied with all 55 strikes) 68 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM LockingElectric Strikes Devices

APPLICATION

UNIFLEX™ SPEC - APPLICATION SPECIFIC FACEPLATES INCLUDED Lock Compatibility: To determine compatibility of locksets not listed below, see faceplate dimensions. UniFLEX Spec models include strike and faceplate for individual job requirements. Recommend for specifiers and industry professionals for fast and easy specification of individual installation requirements.

FACEPLATE MODEL LOCKSET APPLICATION COMPATIBLE LOCKS OPERATION DIMENSION

55-A • Cylindrical locksets • All cylindrical locksets with • Locksets with ANSI centerline 1/2" to 5/8" latchbolts After releasing the latchbolt, the keeper latch entry lockset with up to • Locksets with ANSI 3/4" latchbolt returns to the locked centerline latch entry with position. up to 3/4" latchbolt

55-B • Accurate • Falcon 2-5/16” • Mortise locksets and mortise After releasing the • Arrow • Marks exit devices with or without a latchbolt, the keeper • Best • Sargent deadlatch located below the returns to the locked • Corbin Russwin • Yale position. latchbolt. • Dorma • PDQ

55-C • Mortise locksets and mortise • Schlage After releasing the exit devices with or without a • Baldwin latchbolt, the keeper 1-3/8” deadlatch located above the • Hager returns to the locked latchbolt. position.

• Mortise locksets with a Deadbolt Retracted: 55-D When signaled by the deadbolt and a deadlatch located below the latchbolt. access control the strike • Accurate • Falcon keeper unlocks, permitting • With deadbolt retainer • Arrow • Marks installed, access control will door latch release. The • Best • Sargent not release projected deadbolt. strike keeper returns to the • Corbin Russwin • Yale • With deadbolt retainer closed and locked position. • Dorma • PDQ removed, access control will The door then returns to the release deadbolt. The door closed and locked position. will not close when deadbolt is projected. Deadbolt Retainer Installed 55-E • Mortise lockset with a deadbolt. Night-Latch/Access Control • With deadbolt retainer Lockout: When the deadbolt installed, access control will is projected the strike will not not release projected deadbolt. • Baldwin release by access control. • With deadbolt retainer removed, access control will Deadbolt Retainer Removed release deadbolt. The door will not close when deadbolt is projected. Night-Latch: When the deadbolt is projected, the 55-F • Mortise locksets with a strike keeper unlocks, deadbolt and a deadlatch permitting door latch and located above the latchbolt. deadbolt release by the • With deadbolt retainer access control. The strike installed, access control will keeper returns to the closed • Schlage not release projected deadbolt. and locked position. The • Hager • With deadbolt retainer door will not close and removed, access control will lock when the deadbolt release deadbolt. The door is extended and must be will not close when deadbolt is manually retracted to permit projected. door closure.

69 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM INSTRUCTIONS Electric Strikes

QUICK CONNECT POWER INPUT FIG. 1 WIRE DIAGRAM FIG. 3 55 SERIES ELECTRIC STRIKE (INCLUDED WITH STRIKES) • 12VDC and 24VDC pigtails Included • No need to cut and splice wires to configure voltage • Fewer wire nuts required Power Connector Pigtail • Small connectors provide organized space saving wiring • Easy troubleshooting 24VDC or 12VDC

FIG. 4 QUICK CONNECT BUZZER (SEE ACCESSORIES) Monitoring Contact • Buzzer in line between small connectors LCM SPDT • For failsecure strikes, audible tone indicate unlocked • No need to cut and splice wires • Reduces wire nut connections LBM SPDT • Small connectors provide organized space saving wiring • Easy troubleshooting

DBM SPDT 50-RMB Buzzer 12 or 24 VDC Power Pig tail HIGH SECURITY DOOR SECURE MONITORING: LBM/LCM Required LCM & LBM wired in series indicates door is FIG. 5 QUICK CONNECT BRIDGE RECTIFIER (SEE ACCESSORIES) closed, latched and deadlocked or door is unlatched, open or unlocked. • Bridge rectifier in line between small connectors • No need to cut and splice wires • Eliminates 4 wire nut connections • Small connectors provide organized space saving wiring • Easy troubleshooting

50-BR 12 or 24 VAC Bridge Rectifier Power Pig tail

FIG. 2 FIELD REVERSIBLE FIG. 6 HORIZONTAL ALIGNMENT ADJUSTMENT FAILSAFE / FAILSECURE

Failsecure Mode: Factory supplied, Failsecure 3A-Nominal Alignment: Loosen mounting screws. Shift strike body Failsafe Mode: Remove cover, push solenoid behind the faceplate horizontally. Tighten mounting screws. toward end of strike as shown below. 3B-Excessive Alignment Issues: Remove shim filler bar from keeper.

Remove Cover 3A 3B

Failsecure Shown

Failsafe

70 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM Monitoring Strikes Locking Devices Latch & Deadbolt Monitoring Strikes

MS-12

Compatible with Mechanical, Electrifed and Battery Powered • Cylindrical Locksets • Mortise Locksets With or Without Deadbolts • Deadbolts • Mortise Exit Devices

APPLICATIONS FEATURES • Latch Status & Request-to-Exit Signaling for • For Standard ANSI 2-3/4” or 4.3/4” Strike Plates Mechanical and Electrifed Cylindrical and Mortise (Provided by Others) Locks & Mortise Exit Devices • Solid Stainless Steel Actuators Installed in Heavy • Latch Status & Request-to-Exit for Battery Powered Gauge Strike Back Box Locks • Unobtrusive, Vandal Resistant Actuators Are • Deadbolt Status Recessed to Inhibit Tampering. • Alarm Shunt or Activation • Field Adjustable for Latch & Bolt Length • Interlock and Mantrap Signaling • SPDT and DPDT Contacts Available • Door Ajar or Forced Entry Signaling • All Wiring Maintained in Frame, Eliminating the • Shared Bathrooms: Ensures Unlocking of Both Need for Power Transfer Devices and Wires in the Doors When Exiting Either Door of a Shared Door, Maintaining Fire Door Integrity Bathroom • Delayed Egress Lock Activation, Eliminates Need for YEAR Exit Device Switch and No Wires in Door

W A5 TY RRAN 71 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM Monitoring Strikes

MS-14 MS-16

MS-18 MS-20

Strike plate provided by others

MODELS MS-12 SPDT Cylindrical latch or tubular deadbolt monitor 2-3/4" MS-14 SPDT Cylindrical latch monitor 4-7/8" MS-16 SPDT Mortise lock latch monitor MS-18 SPDT Mortise lock deadbolt monitor MS-20* SPDT Mortise lock latch and deadbolt monitor MS-12D DPDT Cylindrical latch monitor 2-3/4" MS-14D DPDT Cylindrical latch monitor 4-7/8" MS-16D DPDT Mortise lock latch monitor MS-18D DPDT Mortise lock deadbolt monitor MS-20D* DPDT Mortise lock latch and deadbolt monitor *MS-20 and MS-20D are handed but reversible

Contact: 5 Amps @ 12/24VDC

72 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM LockingElectric Strikes Devices

73 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM Security Door Controls SDC Door Check List

JOB NAME:______

DOOR IDENTIFICATION: (EXTERIOR______(INTERIOR)______

DOOR LOCATION OR NUMBER ______

SINGLE DOOR HANDING: RH___ LH___ RHR___ LHR___

DOUBLE DOORS HANDING: RH___ LH___ RHR___ LHR___

TYPE OF DOOR: HOLLOW METAL ___: ALUMINUM & GLASS ___: HERCULITE (TOP & BOTTOM RAILS) ______

HERCULITE (BOTTOM RAIL ONLY) ___: HERCULITE (PIVOT & LOCK PATCH FITTINGS) ______

DOES DOOR HAVE AN “EXIT” SIGN ABOVE IT ___ YES ___ NO

SERVICE DOOR SIZE: W_____ X H_____+ DOOR THICKNESS______+ LOCK HEIGHT______+ LOCK BACKSET______

HINGE TYPE ______+ HINGE SIZE ______+ HINGE FINISH ______

EXISTING LOCK TYPE & BRAND______+ FINISH ______

800-413-8783 DOOR CLOSER: SURFACE MOUNT: INSIDE___ OR OUTSIDE___: CLOSER MANUFACTURE______

DOOR CLOSER: IN THE HEADER ___: HOLD OPEN FEATURE YES___ NO___ : DEGREE OF OPENING______

AUTOMATIC DOOR OPERATOR: MANUFACTURE & MODEL#______

AUTOMATIC DOOR OPERATOR PUSH PLATE SWITCHES: HARD WIRED ______OR WIRELESS______

WHAT KIND OF CEILING ______(PLASTER, DRYWALL, LIFT OUT, PANELS OR PUZZLE)

HOW HIGH IS THE CEILING ______

WHAT KIND OF HEADER ______(NONE, WOOD, STEEL, ALUMINUM, GLASS)

WHAT TYPE OF TRAFFIC: LIGHT ____ MEDIUM _____ HEAVY _____

PICTURES TAKEN OF DOOR: YES ____ OR NO ____

MEASURMENT FROM DOOR TO ACCESS CONTROLLERS: ______

MEASURMENT FROM DOOR TO POWER SUPPLY: ______

WIRE GAGE ______: WIRE TYPE ______: AMOUNT OF WIRES ______: EXTRA WIRES ______

VOLTAGE AT DOOR:______: VOLTAGE AT POWER SUPPLY ______: CURRENT AT DOOR ______

Door Width DOOR HANDS ± 3/64” Door Thickness ± 1/32” ± 1/16” Left Hand Right Hand CL Hinge “LH” “RH”

± 1/64” Door Height (Outside) ± 3/64” ± 1/64” CL Hinge

Lock Left Hand Right Hand Height Reverse Bevel Reverse Bevel ± 1/32” “LHR, LR” “RHR, RR” (Outside) 312 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM INDEX

Item Code Page # Item Code Page # Item Code Page #

110 133 1562SC / 1562SCHDB 26 45-4 / 45-6 / 45-7 69 210 133 1565 / 1566 26 451 / 452 / 453P 187 260 133 1571DE 51 45A 69 280 133 1572 / 1573 10 463 / 474 189 295 143 1575DEU 51 491 / 492 591 918 153 1575U 29 510 thru 590 177

921 159 1576-MP 29 55 A thru F 67 800-413-8783 923 157 1576-ZB 29 55-ABC 67 924 159 1576AB / 1576-BK 29 602RF 239 1511 39 1576DEU 51 621P 249

1561 26 1576U 29 631RF / 632RF / SERVICE 1562 26 1581 / 1582 10 634RF / 636RF 241 1571 10 1581-DF 10 7000-DB1/4 78 101-1A 283 1581DE 10 7000-DB3/8 78 101-1AK / 101-4AM 283 1581S 47 7000-DGK 78 101-DE / 101-KDE 51 1583V 10 701 thru 713 193 101-PAM 283 1591U 37 702R / 708R 193 1091A 123 180A 135 7250 / 7252 D, H, P, S, T 79 10TD 294 2090A 129 7500EB 90 1190A 129 2490A 131 7550 A thru V 91 1291A 123 25-4U 61 7850 / 7852 A thru X 83 12VR 260 290 / 290LS 141 801AL thru 813AL 193 14-2 294 30-4 63 920/921 155 1490A 131 350V / 352V 19 AB Angle Brackets 15 15-1 273 400U-L2 279 ACM-1 258 15-2 / 15-3 273 400U-RMB / 400U-SN 281 AL4 / AL8 271 15-4 59 412 / 413 / 422 / APB1000A 297 1511-DF 10 423 / 424 / 425 179 AR11Y 14 1511DE 10 413MN / 423M 181 BBID 195 1511S 39 431 / 432 / 433 / BL4 / BL8 271 1511T 39 434 / 435 183 BPS6S / BPG6S 213 1512 / 1513 10 441 / 442 / 443 / BR64 265 1561S / 1561TJ 26 444 / 446 185 CB401-AU / CB401-B 225

313 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM INDEX continued

Item Code Page # Item Code Page # Item Code Page #

CB701 225 MC-7 296 Z7550 87 CC1-5 / CC3-5 82 MD-31 293 ZA7850 81 CL4 / CL8 271 MS-12 / MS-14 / ZD7250 80 CR4 257 MS-16 / MS-20 72 ZR7550 87 DBM 68 MSB550 173 ZS7250 80 DC-1 12 PB-16 / PB-8 258 ZT7550 91 DL4 / DL8 271 PD2090A 137 ZT7850 83 SERVICE DPS-11 295 PSB560 171 ZY7550 87 DTMA / DTMO 269 PT-2U 235 Icon Index E1200 / E600 / E6200 21 PT-3V 235 E300 33 PT-5 233 Made in the USA 800-413-8783 E75 / E76 / E77 163 PTH 229 EA100 277 PTM 231 UL Listed EH10 / EH20 / EH30 / RB12V4 / RB12V7 261 Grade EH40 /EH42 287 RCC 271 Grade 1 C T O1M N PLIA EKE03 96 S6100 / S6200 / S6300 95 EMC 259 S6100-101 99 CE Listed EP17624 / EP17624TJ 35 S6303FH 105 Weather Resistant EZ-A / EZ-B / EZ-D / SC-10 106

EZ-T 11 SK-82 / SK-88 85 ® Availabe through shipQUICK Inventory FB-4 257 SK-L90 85 LIFETIME FP Filler Plates/ TCC 271 Lifetime Warranty W AL TY RRAN AB Angle Brackets 14 TJ1 / TJ2 12 YEAR FS23M 127 TJ2440 264 3 Year Warranty W A3 TY RRAN GKE03 96 TJ81 /TJ82 12 YEAR GL160A / GL260A 139 TP1220 / TP2440 264 5 Year Warranty W A5 TY RRAN HID1326-25 169 TR-12 / TR-24 263 FIELD 12 24 Field Selectable IP100 119 UB11 / UB12 13 S E EL L ECTAB IPPRO 147 UF11 / UF12 13 ADA Compliant IPRW 151 UF81 / UF82 13

LR100 113 UR-1 / UR2-4 / UR4-8 253 POWER Power over Ethernet Capable Locking Hardware MC-4 296 Z7250 / Z7252 75 DATA 314 SDC SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM NOTES 800-413-8783 SERVICE