Electric Strikes —

Layout S. 24 – DORMA CI-2012 • e nglisch USA Stand 07.04.2014

El ectric Strik es —

Basic, Smoke, Fire, TV 5xx ANSI ES Series

DORMA Deutschland GmbH DORMA Americas DORMA Platz 1 DORMA Drive, Drawer Ac 58256 EnnEPEtAl Reamstown, PA 17567-0411 GERMAny Phone (800) 523-8483 04/14,WN 052 184 Electric 51532, Strikes, GB, x. DMS. xx/14 notice without change to Subject Phone +49 2333 793-0 Fax (800) 274-9724 Fax +49 2333 793-4950 E-mail [email protected] www.dorma.com www.dorma-usa.com

DORMA_U4-Adressen_CI-2012.indd 24 07.04.14 09:18 Electric Strikes

Acc ess at the push of a button — DORMA electric strikes ensure Whether for standard doors, fire Benefits door security in private, public and smoke check doors or for and commercial premises, are doors in emergency and escape ..For over-rebated and ..Fail-secure and fail-safe suitable for use with many routes, you will be able to find flush-closing doors models different locks and door Types the right model to match your ..Modular construction system ..Series Fire 447 and Fire 448 and are available in all particular requirements – ensures flexibility for fire and smoke check conventional operating voltages. all quality-assured by DORMA. ..Stainless steel strike plates doors with general approval ..Adjustable latch ensures covering any position optimal alignment to existing ..Holding function, unlocking structural conditions function and monitor contact ..Thanks to the Easy Adapt depending on model concept for electric strikes of the series Basic, Basic-Safe, Smoke, Fire 447 and Fire 448 there is no need for disruptive recesses in the door frame for the electric strike latch, so the door seal is left unbroken.

2 DORMA Electric Strikes

C ontents — Electric Strikes Data and features 4 Dimensions 6 Series Basic Standard electric strikes 8 Series Basic-Radius Electric strikes with radius latch 9 Series DES 7xx / Basic-Small Doors with thermal-break profiles 10 Series Smoke Electric Strikes for Smoke Check Doors 11 Series Fire Electric Strikes for Fire and Smoke Check Doors 12 Strike plates 13 Series DES 300, DES 400 Security electric strike 18 Series TV 5xx Locking mechanisms 20 Strike plates – Series TV 5xx 22 Accessories 28 Electric Strikes Data and features 32 ANSI ES Series Dimensions 34 Series ES61 40 Series ES62, ES62F 41 Series ES72F 42 Series ES74F, ES79F 43 Series ES84, ES86 44 Series ES96F 46

DORMA 3 Electric Strikes

Data and features adius Safe adius R R ucky 448 Basic ucky Smoke 448 ucky Fire 448 Electric Strikes Electric Series Basic L Basic-Safe Basic- Basic- DES 72x DES 731 Basic-Small Smoke L Fire 447 L DES 300 DES 400

Standard doors 3 3 3 3 3 3 3 – – – – – – – Doors with thermal-break profiles – – – – – – – 3 – – – – – – Smoke protection doors – – – – – – – – 3 3 3 3 – – Fire protection doors – – – – – – – – – – 3 3 – – Symmetrical housing 3 3 3 3 3 – – – 3 3 3 3 3 3 Asymmetrical housing – – – – – 3 3 3 – – – – – – Non-handed 3 3 3 3 3 3 3 – 3 3 3 3 3 3 Radius latch – – – 3 3 – – – – – – – – – Fail-safe model – – 3 – 3 – 3 – – – – – – – Fail-secure model 3 3 – 3 – 3 – 3 3 3 3 3 – – Fail-Safe/Fail-secure switchable – – – – – – – – – – – – 3 3 Unlocking function (E) 3 – – 3 – – – 3 – – – – – – Holding function (A) 3 – – 3 – – – – – – – – – – monitor contact (RR) 3 3 3 3 3 3 3 – 3 3 3 3 3 3 Latch guide Easy Adapt § 3 § – – – – – § 3 § 3 – – Anti-tamper contact – – – – – – – – – – – – – 3

3 = yes – = no § = option

In emergency and escape routes the DORMA TV5xx door locking mechanism must be used as an “electric strike”. (See pages 20).

Electric Strikes Voltage Current Resistance ED Basic, Basic-R, Smoke, Fire 447 6-12 V 6 V AC 0.65 A 6 V DC 0.80 A 12 V AC 1.35 A 6.5 Ω 12 V DC 1.53 A Basic, Basic-R, Smoke, Fire 447 12 V AC 12 V AC 0.44 A 18.0 Ω Basic, Basic-Safe, Basic-R, Basic-R Safe, 12 V DC 12 V DC 0.22 A 51.0 Ω 100 % Smoke, Fire 447 Basic, Basic-Safe, Basic-R, Basic-R Safe, 24 V DC 24 V DC 0.13 A 170.0 Ω 100 % Smoke, Fire 447 Basic, Smoke, Fire 448 12–24 V DC 12 V DC 0.24 A 100 % Lucky Strike 24 V DC 0.18 A 100 % Basic-Small 6–12 V 6 V AC 0.70 A 6 V DC 0.76 A 12 V AC 1.40 A 7.5 Ω 12 V DC 1.50 A DES 700 12/24 V DC 12 V DC 0.20 A 100 % 24 V DC 0.21 A 100 % DES 300, DES 400 12/24 V DC 12 V DC 0.20 A 100 % 24 V DC 0.10 A 100 %

The specifications for the alternating voltage (AC) are for a frequency of 50 Hz. The pure ohmic resistance of the coil is stated.

4 DORMA Electric Strikes

A = Holding function If the electric strike lever handle is activated momentarily, the mechanism in the electric strike responds, releasing the strike until after the door has been opened. Once-off entry is possible. RR E = Unlocking A A small lever switches the electric strike off. The door is fully accessible without any signalling from the E electric strike. RR = monitor contact A floating contact supplies “Door open” / “Door closed” status signals.

Function Lucky Strike In addition to the standard product advantages indicated above, DORMA electric strikes featuring the Lucky Strike Lucky Strike Effect: Module also offer the following: ..Switch-off of audible signal tone on activation Switch-off ..Effective unlocking and release under pre-load of audible ..100% duty factor signal tone on ..Multi-voltage capability: 12-24 V DC activation ..With the additional GL rectifier module, Lucky Strike units No sound can also be operated with 12-24 V AC during permanent- open Lucky Basic (standard-duty model)

identical dimensions ..Available as a fail-secure unit Effective 100 N unlocking under Lucky Smoke (smoke-rated model) pre-load ..Certificate of approval as a reversible smoke-rated unit

Lucky Fire (fi re-rated model) ..Certifi cate of approval as a reversible fire-rated unit

Easy Adapt The Easy Adapt is a casing cover with a latch guide/keeper for electric strikes of the series Basic, Basic-Safe, Smoke and Fire 447/448. The cover is designed so that the lock latch is ideally guided and located without any danger of it becoming jammed. The Easy Adapt simply replaces the standard casing cover.

In the case of the Lucky Basic, Lucky Smoke and Lucky Fire 447/448 units, the Easy Adapt cover is part of the standard equipment.

Thanks to the Easy Adapt concept, there is no need for disruptive recesses in the door frame for the electric strike latch, so the door seal is left unbroken.

DORMA 5 Electric Strikes

Basic / Basic-Safe / Smoke Basic-Radius / Basic-Radius Safe

10,75 11 13 11 13

M 4 M 4 25

14,

14,25

52,5

47,5

52,5

47,5

8 M 3 M 3

14,2

14,

11,75

20,5 28,7 2 20,5 28,7

36° 24,5 Model with 30° Model with monitor contact 22 monitor contact

DES 7xx Basic-Small / Basic-Small-S

7,7 12 Basic-Small Basic-Small-S

10 2,5 22 10,75 6,8 6,8 13,4

21,5 1,75

8 M 4

3 M 4

18,

45,5

52,5

105

102 4 4 90

24,5

52,5

47,5

52,5 M 3 M 3 M4

30,7

9,5 16,3 16,3 28 28 2,5 20

17,7

20,8 32° 20

6 DORMA Electric Strikes

Fire 447 / Fire 448 Fire 448 + Easy Adapt

10,75 11 13 11 5

M 4 25 M 4

14,

76,5

52,5

47,5

84,5

52,5 M 3 55,5

14,75

12,25

20,5 28,7 2 23,5 28,7

36° 24,5 Model with 23,2 Model with monitor contact 28 monitor contact

DES 300 DES 400

29 26

19,5

105

124

39,5

3 35

3 24 43

43,5

DORMA 7 Electric Strikes BASIC, BASIC-SAFE

St andard Electric Strikes —

Series Voltage Unlocking Holding Monitor Easy Type Order No. function (E) function (A) contact (RR) Adapt Basic 6–12 V AC/DC – – – – 15117106 3 – – – E 15117206 – 3 – – A 15117306 3 3 – – AE 15117406 – – 3 – RR 15117506 3 – 3 – E-RR 15117606 – 3 3 – A-RR 15117706 3 3 3 – AE-RR 15117806 12 V AC – – – – 15117111 3 – – – E 15117211 12 V DC – – – – 15117112 100% ED 3 – – – E 15117212 – 3 – – A 15117312 3 3 – – AE 15117412 – – 3 – RR 15117512 3 – 3 – E-RR 15117612 – 3 3 – A-RR 15117712 3 3 3 – AE-RR 15117812

Fail-secure 24 V DC – – – – 15117124 100% ED 3 – – – E 15117224 – 3 – – A 15117324 3 3 – – AE 15117424 – – 3 – RR 15117524 3 – 3 – E-RR 15117624 – 3 3 – A-RR 15117724 3 3 3 – AE-RR 15117824 Basic 448 12–24 V DC – – – – 15117148 Lucky Strike 100% ED – – 3 – RR 15117548 – – – 3 15117147 – – 3 3 RR 15117547 Basic 448 12–24 V AC/DC – – – – 15117144 Lucky Strike 100% ED – – 3 – RR 15117544 incl. GL-Module – – – 3 15117143 – – 3 3 RR 15117543 Basic-Safe 12 V DC – – – – 15137112 100% ED – – 3 – RR 15137512 24 V DC – – – – 15137124 Fail-Safe 100% ED – – 3 – RR 15137524

Contact rating: max. 48 V, 1 A (RR model) 3 = yes – = no

Specification text

Electric strike with adjustable Model: Basic Y with holding function Accessories latch, for over-rebated Fail-secure Y with unlocking function (to be ordered separately) and flush-closing doors, Y 6–12 V AC/DC Y with monitor contact non-handed. Y 12 V AC Easy Adapt Y 12 V DC Model: Basic-Safe (see page 30) Y 24 V DC Fail-Safe Stainless steel strike plate Y Lucky Strike 12–24 V DC Y 12 V DC (see page 13) Y Lucky Strike 12–24 V AC/DC Y 24 V DC Lucky Strike Platine incl. GL-Module Y with monitor contact (see page 30)

8 DORMA Electric Strikes BASIC-RADIUS, BASIC-RADIUS SAFE

El ectric Strikes with Radius Latch —

Series Voltage Unlocking Holding Monitor Easy Type Order No. function (E) function (A) contact (RR) Adapt Basic-Radius 6–12 V AC/DC – – – – 15111106 3 – – – E 15111206 – 3 – – A 15111306 3 3 – – AE 15111406 – – 3 – RR 15111506

Fail-secure 12 V DC – – – – 15111112 100% ED – – 3 – RR 15111512 24 V DC – – – – 15111124 100% ED – – 3 – RR 15111524 Basic-Radius Safe 12 V DC – – – – 15131112 100% ED – – 3 – RR 15131512 24 V DC – – – – 15131124 Fail-Safe 100% ED – – 3 – RR 15131524

Contact rating: max. 48 V, 1 A (RR model) 3 = yes – = no

Specification text

Electric strike with adjustable Model: Basic-Radius Model: Basic-Radius Safe Accessories latch, for over-rebated Fail-secure Fail-Safe (to be ordered separately) and flush-closing doors, Y 6–12 V AC/DC Y 12 V DC non-handed. Y 12 V DC Y 24 V DC Stainless steel strike plate Y 24 V DC (see page 13) Y with monitor contact Y with holding function Y with unlocking function Y with monitor contact

DORMA 9 Electric Strikes DES 7XX, BASIC SMALL

A symmetric Electric Strikes —

Series Voltage Unlocking Holding Monitor Easy Type Order No. function (E) function (A) contact (RR) Adapt DES 720 12/24 V DC – – – – L/R 7030000002943

DES 721 12/24 V DC – – 3 – L/R 7030000002944 Fail-secure

DES 731 12/24 V DC – – 3 – L/R 7030000002945 Fail-Safe

3 = yes – = no

Specification text

Electric strike with permament Model: Accessories keeper (not adjustable) for (to be ordered separately) normal demands, for over-rebated Y Fail-secure and flush-closing doors, 12/24 V DC Stainless steel strike plate non-handed. Y with monitor contact (see page 13)

Y Fail-Safe 12/24 V DC Y with monitor contact

Series Voltage LH/ RH/ Unlocking Holding Easy Type Order No. ISO 6 ISO 5 function (E) function (A) Adapt Basic-Small 6–12 V AC/DC 3 – – – – L 15119106 3 – 3 – – LE 15119206 – 3 – – – R 15118106 – 3 3 – – RE 15118206 Fail-secure Basic-Small-S 6–12 V AC/DC 3 – 3 – – LE 15121206 – 3 3 – – RE 15120206 3 = yes – = no

Specification text

Electric strike of compact Model: Basic-Small-S Accessories design for thermal-break Fail-secure with lip seal for covering (to be ordered separately) profiles, with adjustable latch, Y 6–12 V AC/DC the recess in the profile for over-rebated and Stainless steel strike plate flush-closing doors. Y ISO 6 Fail-secure (see page 13) Y ISO 5 Y 6–12 V AC/DC

Y with unlocking function Y ISO 6 Y ISO 5

Y with unlocking function

10 DORMA Electric Strikes SMOKE

El ectric Strikes for Smoke Check Doors —

Series Voltage Unlocking Holding Monitor Easy Type Order No. function (E) function (A) contact (RR) Adapt Smoke 6–12 V AC/DC – – – – 15117006 – – 3 – RR 15117906 12 V AC – – – – 15117011 – – 3 – RR 15117911 12 V DC – – – – 15117012 100% ED – – 3 – RR 15117912 24 V DC – – – – 15117024 100% ED – – 3 – RR 15117924 Smoke 448 12–24 V DC – – – – 15117048

Lucky Strike Fail-secure 100% ED – – 3 – RR 15117948 – – – 3 15117047 – – 3 3 RR 15117947 Smoke 448 12–24 V AC/DC – – – – 15117044 Lucky Strike 100% ED – – 3 – RR 15117944 incl. GL-Module – – – 3 15117043 – – 3 3 RR 15117943

Contact rating: max. 48 V, 1 A (RR model) 3 = yes – = no

Advice F Approval certification Security electric strikes may The DORMA security electric only be used in conjunction with strike has been tested by the door closers in accordance with State Material Testing Authority DIN EN 1154, DIN 18263-1 of North Rhine-Westphalia, and DIN 18263-4 on swing/ Germany for use with smoke pivoting doors. check doors (general approval In the case of doors that exert covering any position). increased pressure on the An approval certificate is also electric strike latch in the required for the smoke check closed position as a result of door to be used with the design factors (e.g. seals), the DORMA. models must be operated using alternating current (AC). This applies in particular if the door is equipped with a swing door operator.

Specification text

Security electric strike for use Model: Smoke Accessories on fire and smoke check doors, Fail-secure (to be ordered separately) with adjustable latch, for Y 6–12 V AC/DC over-rebated and flush closing Y 12 V AC Easy Adapt doors, non-handed. Y 12 V DC (see page 30) Y 24 V DC Stainless steel strike plate Y Lucky Strike 12–24 V DC (see page 13) Y Lucky Strike 12–24 V AC/DC incl. GL-Module

Y with monitor contact

DORMA 11 Electric Strikes FIRE 447, FIRE 448

El ectric Strikes for Fire and Smoke Check Doors —

Series Voltage Unlocking Holding Monitor Easy Type Order No. function (E) function (A) contact (RR) Adapt Fire 447 6–12 V AC/DC – – – – 15147106 – – 3 – RR 15147506 12 V DC – – – – 15147112 100% ED – – 3 – RR 15147512 24 V DC – – – – 15147124 100% ED – – 3 – RR 15147524 Fire 448 12–24 V DC – – – – 15147148 Lucky Strike 100% ED – – 3 – RR 15147548 Fail-secure – – – 3 15147147 – – 3 3 RR 15147547 Fire 448 12–24 V AC/DC – – – – 15147144 Lucky Strike 100% ED – – 3 – RR 15147544 incl. GL-Module – – – 3 15147143 – – 3 3 RR 15147543

Contact rating: max. 48 V, 1 A (RR model) 3 = yes – = no

Advice F Approval certification Security electric strikes may The DORMA Fire 447 and only be used in conjunction with Fire 448 security electric strike door closers in accordance with has been tested by the State DIN EN 1154, DIN 18263-1 Material Testing Authority of and DIN 18263-4 on swing/ North Rhine-Westphalia, pivoting doors. Germany for use with fire and In the case of doors that exert smoke check doors (general increased pressure on the approval covering any position). electric strike latch in the An approval certificate is also closed position as a result of required for the fire and smoke design factors (e.g. seals), the check door to be used with the models must be operated using respective DORMA door strike. alternating current (AC). This applies in particular if the door is equipped with a swing door operator.

Specification text

Security electric strike for use Model: Fire 447/448 Accessories on fire and smoke check doors, Fail-secure (to be ordered separately) with adjustable latch, for over- Y 6–12 V AC/DC rebated and flush closing doors, Y 12 V DC Easy Adapt non-handed. Y 24 V DC (see page 30) Y Lucky Strike 12–24 V DC Stainless steel strike plate Y Lucky Strike 12–24 V AC/DC (see page 13) incl. GL-Module

Y with monitor contact

12 DORMA Electric Strikes Strike Plates

St ainless steel strike plates for electrical strikes —

Electric Strikes Characteristics

SO 5 SO 6 I ucky Basic I adius Safe adius adius R R H/ H/ ucky Smoke ucky ucky Fire 448 L = Edges radiused (for wooden doors) holeswith for bolt contact locking Drawing see page Basic- Small Basic Smoke L / Fire 448 Fire 447 L Dimensions mm R = DES 7xx L Basic, SafeBasic Basic- Order No.

Rebated strike plates

WR 25 – 3 3 – 3 3 25x32x250x3 R – – 14 15170025 WL 25 – 3 3 – 3 3 25x32x250x3 L – – 14 15171025 WR 25-R – 3 3 – 3 3 25x32x250x3 R 3 – 14 15170125 WL 25-R – 3 3 – 3 3 25x32x250x3 L 3 – 14 15171125 WR 25-R-RK – 3 3 – 3 3 25x32x250x3 R 3 3 14 15170225 WL 25-R-RK – 3 3 – 3 3 25x32x250x3 L 3 3 14 15171225

Flanged strike plates

FKH 24 3 3 3 – 3 3 24x135x3 L/R – – 14 15180324 FKM 24 3 3 3 – 3 3 24x135x3 L/R – – 14 15180424 FL 22 3 3 3 3 3 3 22x250x3 L/R – – 15 15180022 FLH 24 3 3 3 – 3 3 24x250x3 L/R – – 15 15180124 FLH 24-94 3 3 3 – 3 3 24x250x3 L/R – – 15 15181124 FLM 24 3 3 3 – 3 3 24x250x3 L/R – – 15 15180224 FLM 24-94 3 3 3 – 3 3 24x250x3 L/R – – 15 15181224 FLM 24-RK 3 3 3 – 3 3 24x250x3 L/R – 3 15 15180724 FLM-131 3 3 3 – 3 3 25x280x3 L/R – – 16 16500000149 FLM131-RK 3 3 3 – 3 3 25x280x3 L/R – 3 16 16500000166

Strike plates for use in combination with "Easy Adapt"

FLM25 Easy Adapt – 3 – – 3 3 25x250x3 L/R – – 16 15180925 (Lap 40 / 80 mm)

FLM26 Easy Adapt – 3 – – 3 3 25x250x3 L/R – – 16 15180926 (Lap 40 / 100 mm)

FLM28 Easy Adapt – 3 – – 3 3 28x250x3 L/R – – 16 15180928 FLR25 Easy Adapt – 3 – – 3 3 25x250x3 L/R 3 – 16 16500000090 (Lap 40 / 80 mm)

FLR30 Easy Adapt – 3 – – 3 3 30x250x3 L/R 3 – 16 15180930 (Lap 37.5 / 100 mm)

FLR30-RK Easy Adapt – 3 – – 3 3 30x250x3 L/R 3 3 17 15180830 (Lap 37.5 / 100 mm)

FLM34 Easy Adapt – 3 – – 3 3 34x250x3 L/R – – 17 16500000106 FLM34-RK Easy Adapt – 3 – – 3 3 34x250x3 L/R – – 17 16500000107 FL34 Easy Adapt – 3 – – 3 3 34x250x3 L/R – – 17 15180934 FL34-RK Easy Adapt – 3 – – 3 3 34x250x3 L/R – 3 17 15180834 FL35-RK Easy Adapt – 3 – – 3 3 35x280x3 L/R – 3 17 16500000165

3 = yes – = no

DORMA 13 Electric Strikes Strike Plates

WR 25 / WL 25 WR 25-R / WL 25-R WR 25 / WL 25-R-RK

9,5 9 9,5 9 9,5 9

15 15

4,6

11 11 11

64 4,5 4,5 4,5

4,25

45,5

52,5

52,5 52,5

250 16 250 16 16 250 16 16 16

40 4 4 4

12 12 12

74 74

12 10

10 10 R 10 10 R 10 10 R R 10

25 25 Illustration: Illustration: 25 Illustration: RH/ISO 5, LH/ISO 6 RH/ISO 5, LH/ISO 6 RH/ISO 5, LH/ISO 6 is the mirror image is the mirror image is the mirror image

FKH 24 FKM 24

12 12 6

11 1 11

4, 4,5 4,5 4,5

45,5

4,25

135

45,5

52,5

45,5

52,5

16 16

45,5

3 24 24

14 DORMA Electric Strikes Strike Plates

FL 22 FLH 24 FLH 24-94

19 19 5 5 11

21 21

5 5

5 5 11 11

5,1 58, 5 5

,25 ,25

4 4

4,25

4 4

45,5

45,

45,5

52,5 52,5 52,5

16 16 16 20

257

250 250 4 4 4

12 12 12

74 74

21 21

40,5

7 7

2 22 24 24

FLM 24 FLM 24-94 FLM 24 RK

14 14 14

7 7

5 5

11 11 11

64 64 5 5 5

4,25

45,5

52,5

45,5

52,5 52,5

16 20

16 16 0

2 4 4 4

12 12 12

1 10

See page 30 for bolt locking contact

3 3 24 24 24

DORMA 15 Electric Strikes Strike Plates

FLM 131 FLM 131-RK FLR 25 / FLM 25

14 14 14

7 7

94 94 13 4,5 12,5 12,5

5 5 9

17 44 11 52,5

4,25 4,25

44 44

45,5

52, 52, 7

250

40,5

280 280 16 16

40 40 4 4

12 12

50 12

74 9

7 10

7 7 40

3 See page 30 25

3 3 for bolt locking contact 25 25

FLM 26 FLM 28 FLR 30

12,5 14 15

65 11 14 13 4,5 4,5 4,5

9 9 9

100 55 17 44

10 17 44

52,5

52,5 52,5 11 11 11

8 7 5

250

40,5

250

40,5

8 50

74 9 6 14

12 12

8,5

13 13 R 12

37,5 40

3 25 28 30

16 DORMA Electric Strikes Strike Plates

FLR 30-RK FLM 34 FLM 34-RK

15 16 16

8,5

6 14 12,5 6 12,5 4,5 4,5 4,5

9 9 9

100 55

17 4

17 2,5

4 52,5 17

5 11 52, 11 11

6,5 0

250

40 8 8

14 12

12 12 3

12 20 8

7 R 12 7

37,5 See page 30 See page 30 for bolt locking contact for bolt locking contact

3 30 34 34

FL 34 FL 34-RK FL 35-RK

17 17 17,5

4,5

12 12 94 4,5 4,5

9 9 13

5 4,5

4 17 44

48 17 44

52,

52, 11 11 9

48 17 44

52,

0 6 6 11

40 7 0

28 14 6

42 9

74 12

50 14 3

12 20 7

1 20

See page 30 7 for bolt locking contact

3 34 34 See page 30

3 35 for bolt locking contact

DORMA 17 Electric Strikes DES 300, DES 400

SE CURITY ELECTRIC STRIKES —

Series Voltage Anti-tamper Monitor Type Order No. contact contact (RR) DES 300 12–24 V DC – – 15112124 100% ED – 3 RR 15115424

DES 400 12–24 V DC – – 15115124 100% ED 3 3 RR 15115524 Fail-secure / Fail-Safe

Contact rating: max. 48 V AC/30 V DC, 2A (RR model) 3 = yes – = no

Electric Strike for heavy-duty applications.

Due to the robust construction ..Superiour holding force this model is for use in doors ..Voltage field selectable with high level of security 12V / 24 V DC ..Fail safe / fail secure, easy to adjust ..Monitoring contacts available ..Monitoring contact "door closed" available ..Anti tamper contact (DES400 only)

Specification text

Electric strikes for use in doors Model: Accessories with high securtiy demands. DES 300 (to be ordered separately) Voltage field selectle 12V / 24V. Y with monitor contact Extension lips Fail safe or fail secure adjustable, stainless steel - strike plate DES 400 included. Y with monitor contact For use LH and RH. Y with anti-tamper contact

18 DORMA Electric Strikes DES 300, DES 400

Extension lips Electric Strikes Extension lip Extension Order No. DES 300 DES 315 15 mm 15115215 DES 325 25 mm 15115225 DES 350 50 mm 15115250 DES 375 75 mm 15115275 DES 400 DES 415 15 mm 15115015 DES 425 25 mm 15115025 DES 450 50 mm 15115050 DES 475 75 mm 15115075

75 mm

50 mm

15 mm

25 mm

DORMA 19 Electric Strikes TV 5XX

L ocking Mechanisms — Door locking mechanisms for Maximum holding force in concealed jamb installation. accordance with “Requirements Can also be used as electric for electrical locking systems strikes for emergency exits. on doors in emergency escape Integral monitor contacts for routes” (EltVTR Version 12/97). signalling active/inactive status. For over-rebated and flush-closing doors.

Technical data Operating voltage 24 V DC, +/–5% Power input ca. 58 mA Contact rating 24 V, 500 mA inductive 24 V DC, 1.0 A ohmic Recommended cabling I-Y(ST) Y4 x 2 x 0.6

Benefits F Approval certification ..MPA certificated safety for Installation on fire and smoke use in emergancy exits. check doors is only permitted ..Reduced energy, only 58 mA where these doors are proven to ..Optic advantage, the product be suitable and the associated is for sealed mounting service qualification assessment ..Flexible use because of the criteria are satisfied. adjustable latch.

Terminal assignment and functions

5 NO 5 NO 1 C Armature contact: coil activated 1 C Armature contact: coil activated 4 NC 4 NC 51423 51423 + 2 + 2 Solenoid Solenoid 3 3

19a NO 19a NO 18 C Monitor contact: door closed 18 C Monitor contact: door closed 19 NC 19 NC

19a 18 19 19a 18 19 Contact deﬁnition: door closed, TV activated Contact deﬁnition: door closed, TV activated

20 DORMA Electric Strikes TV 5XX

TV 501 / 502 TV 505 / 506

00 86

220 200

134 160 180

2 1

22,4

TV 5 TV

TV TV 8

64,5

3 505 ø6,5 506

43 501 502 ø 7

22,4 7 14 5,5 15 20 3 39 25 35 10 30 48 42 42

3,5

TV 507 / 508 TV 530

134

200 186 TV TV 5 530-L 530-R

48,

9 4 TV TV 4

4 38 507 ø 5,3 508

23,5 7 17,5 3 39 35

23,

TV-Z 510

Ø5,5

12 - 17

110

135

110

37 3

20 28 24 24

18 1 5 3 3

3 14 7 5 5

DORMA 21 Electric Strikes TV 5XX Strike Plates

FKM 505/506 25-200 FKM 505/506 28-200 FKR 505/506 25-210

14 14 12,5 5,5 ,5 7 12 12 91, 5 91,5 ,5

12 84 113 3 113 11 200 176 6 1 186 6 200 21 6,2 18

8 49 60 60 49 49 13 60 12 12 12 12

3 25 28 25

FKR 505/506 27-200 FK 507/508 35-200

13,5 17,5 7 ,5 53 91 3 0 6 11 200 18 20 8 60

49,5 1,9 26,4 49 60 12 12 12 59,25 7

R 1

3 27 35

22 DORMA Electric Strikes TV 5XX Strike Plates

FKR 507/508 37-200 FK 507/508 37-200 FKM 530 25-280

5,5 14

18,5 17,5 R10 R10 58,5

R4 18 44 22,2 11 48 7 52,5 53 53 200 186 200 186 279 265 12 60 60 80 49,5 1,9 26,4 49,5 1,9 26,4 12 49 60 18,5 12 12 10 113 59,25 59,25 44 7 7 76,5 7

3 3 37 37

2 25

DORMA 23 Electric Strikes TV 5XX

Series Voltage LH/ RH/ Easy Strike Type Order No. ISO 6 ISO 5 Adapt plate

TV 50x 24 V DC 3 – – Angle TV 501 15150124 with strike plate – 3 – Angle TV 502 15150224 3 – – Flat TV 505 15150524 – 3 – Flat TV 506 15150624 3 – 3 Flat TV 507 15150724 – 3 3 Flat TV 508 15150824 TV 50x 24 V DC 3 – – – TV 500-L 15150924 without strike plate – 3 – – TV 500-R 15150024 12 V DC 3 – – – TV 500-L 15150912 – 3 – – TV 500-R 15150012 24 V DC 3 – 3 – TV 500-L Easy Adapt 15150974 – 3 3 – TV 500-R Easy Adapt 15150074 12 V DC 3 – 3 – TV 500-L Easy Adapt 15150972 – 3 3 – TV 500-R Easy Adapt 15150072 TV 510 24 V DC 3 – – – TV 510-L 15151924 without strike plate – – – TV 510-R 15151024 without armature contact 3 12 V DC 3 – – – TV 510-L 15151912 – 3 – – TV 510-R 15151012 TV 520 24 V DC 3 – – – TV 520-L 15152924 without strike plate – – – TV 520-R 15152024 without armature contact 3 without monitor contact 12 V DC 3 – – – TV 520-L 15152912 – 3 – – TV 520-R 15152012 TV 530 24 V DC 3 – – – TV 530-L 15153924 without strike plate – – – TV 530-R 15153024 mounting upside down 3 12 V DC 3 – – – TV 530-L 15153912 – 3 – – TV 530-R 15153012 3 = yes – = no

24 DORMA Electric Strikes TV 5XX

Accessories Dimensions LH/ RH/ Edges Type Order No. ISO 6 ISO 5 radiused TV-Z 510 Forend 24 x 110 mm – – – TV-Z 510-24 15198124 Mortice latch luck Forend 24 x 110 mm – – 3 TV-Z 510-24 R 15198224 Forend 28 x 110 mm – – – TV-Z 510-28 15198128 Forend 20 x 135 mm – – – TV-Z 510-20 15198120

Flanged strike plate for 25 x 200 x 3 mm 3 – – FKM 505 25-200 15190505 TV 500 25 x 200 x 3 mm – – FKM 506 25-200 15190506 TV 510 3 TV 520 28 x 200 x 3 mm 3 – – FKM 505 28-200 16500000017 28 x 200 x 3 mm – 3 – FKM 506 28-200 16500000018 25 x 210 x 3 mm 3 – 3 FKR 505 25-210 16500000349 25 x 210 x 3 mm – 3 3 FKR 506 25-210 16500000350 27 x 200 x 3 mm 3 – 3 FKR 505 27-200 16500000351 27 x 200 x 3 mm – 3 3 FKR 506 27-200 16500000352 Flanged strike plate 35 x 200 x 3 mm 3 – – FK 507 35-200 15190507 Easy Adapt for 35 x 200 x 3 mm – – FK 508 35-200 15190508 TV 500 3 TV 510 37 x 200 x 3 mm 3 – 3 FKR 507 37-200 16500000282 TV 520 37 x 200 x 3 mm – 3 3 FKR 508 37-200 16500000281 37 x 200 x 3 mm 3 – 3 1) FR 507 37-200 16500000347 37 x 200 x 3 mm – 3 3 1) FR 508 37-200 16500000346 Flanged strike plate for 25 x 279 x 2.5 mm 3 – – FLM 530-L 15190530 TV 530 25 x 279 x 2.5 mm – 3 – FLM 530-R 15190531

1) Two edges radiused 3 = yes – = no

DORMA 25 Electric Strikes TV 5XX

Specification text

DORMA TV 50x Door locking mechanism with integral monitor contacts for signalling active/inactive status. Supplied with flanged strike plate and pack of fixings. Maximum holding force in accordance with EltVTR with side-load-independent release

Model: Y with rebated strike plate 30 x 48 x 220 x 3 mm for Falztüren Y without strike plate, without armature contact Y TV 501 ISO 6, 24 V DC Y TV 510-L, ISO 6, 24 V DC Y TV 502 ISO 5, 24 V DC Y TV 510-R, ISO 5, 24 V DC

Y with flanged strike plate 25 x 200 x 3 mm Y TV 510-L, ISO 6, 12 V DC for flush-closing doors Y TV 510-R, ISO 5, 12 V DC Y TV 505 ISO 6, 24 V DC Y TV 506 ISO 5, 24 V DC Y without strike plate, without monitor contact, without armature contact Y with flanged strike plate 35 x 200 x 3 mm Y TV 520-L, ISO 6, 24 V DC for latched model with flush-closing doors Y TV 520-R, ISO 5, 24 V DC Y TV 507 ISO 6, 24 V DC Y TV 508 ISO 5, 24 V DC Y TV 520-L, ISO 6, 12 V DC Y TV 520-R, ISO 5, 12 V DC Y without strike plate Y TV 500-L, ISO 6, 24 V DC Y mounting upside down Y TV 500-R, ISO 5, 24 V DC without strike plate Y TV 530-L, ISO 6, 24 V DC Y TV 500-L, ISO 6, 12 V DC Y TV 530-R, ISO 5, 24 V DC Y TV 500-R, ISO 5, 12 V DC Y TV 530-L, ISO 6, 12 V DC Y TV 500-L, ISO 6, Easy Adapt, 24 V DC Y TV 530-R, ISO 5, 12 V DC Y TV 500-R, ISO 5, Easy Adapt, 24 V DC

Y TV 500-L, ISO 6, Easy Adapt, 12 V DC Y TV 500-R, ISO 5, Easy Adapt, 12 V DC

26 DORMA Electric Strikes TV 5XX

Accessories

DORMA TV-Z 510 Mortice latch lock, fixed in door leaf for interfacing with the TV 50x.

Y Forend 24 x 110 x 3 Y Forend 24 x 110 x 3, Edges radiused Y Forend 28 x 110 x 3 Y Forend 20 x 135 x 3

Flanged strike plate for TV 50x door locking mechanism.

Y FKM 505 25-200 Y FKM 506 25-200 Y FKM 505 28-200 Y FKM 506 28-200 Y FKR 505 25-210 Y FKR 506 25-210 Y FKR 505 27-200 Y FKR 506 27-200 Y FK 507 35-200 Y FK 508 35-200 Y FKR 507 35-200 Y FKR 508 35-200 Y FKR 507 37-200 Y FKR 508 37-200 Y FR 507 37-200 Y FR 508 37-200 Y FLM 530-L Y FLM 530-R

Easy Adapt-TV500 Set to build up a latchguide TV500. (see page 30)

DORMA 27 28 Electric strikes keeper strikes Electric El Easy Adapt Easy Easy Adapt – TV 500 Adapt –TV Easy Strike 447 Prep GL-Module variant) DC (only RK TK 311 TK TK 304 TK TK 411 TK TK 404 TK e ctric Strik DORMA es A ccessories

Electric Strikes Series 3 3 3 3 3 3 3 3 – – Basic 3 3 3 3 3 3 3 3 3 – Lucky Basic 448 3 3 3 3 3 3 3 3 – – Basic-Safe 3 3 3 3 3 3 – – – – Basic-Radius 3 3 3 3 3 3 – – – – Basic-Radius Safe 3 3 3 3 3 – – – – – DES 72x 3 3 3 3 3 – – – – – DES 731 3 3 3 3 3 3 – – – – Basic-Small 3 3 3 3 3 3 3 3 – – Smoke 3 3 3 3 3 3 3 3 3 – Lucky Smoke 448 3 3 3 3 3 3 3 3 – – Fire 447 3 3 3 3 3 3 3 3 3 – Lucky Fire 448 3 3 3 3 3 – – – – – DES 300 = yes – = no –=no 3 =yes 3 3 3 3 3 – – – – – DES 400 3 3 3 3 3 3 – – – – TV 5xx Electric Strikes Accessories

Türöffner-Winkel TüröffnerTüröffnerTüröffnerTüröffner-W-W-W-Winkelinkelinkelinkel TüröffnerTüröffner-W-Winkelinkel X X XXX X X adius R

Electric strikes keeper X = Basic Basic- Basic-Small S Basic-Small Smoke Fire 447 Order No. Basic-AE K50 Basic-AE K50 Basic-AE K50 Basic-AEBasic-AEBasic-AE K50 K50 K50 5.7 – 9.7 mm $ – – – $ $ 16500000111

13,5

13,5 13,5 6 43 6666 8,5 6 6 43434343 8,58,58,58,5 4343 8,58,5 Basic-AE K60 Basic-AE K60 Basic-AE K60 Basic-AEBasic-AEBasic-AE K60 K60 K60 4.7 – 8.7 mm $ – – – – – 16500000112

13,5

13,5 13,5 6 43 6666 8,5 6 6 43434343 8,58,58,58,5 4343 8,58,5 Basic-R K50 Basic-R K50 Basic-R K50 6.2 – 8.2 mm – – – – – 16500000114 Basic-RBasic-RBasic-R K5 K5 K5000 $

14 14 5,5 46 5,55,55,55,57,6 5,55,5 46464646 7,67,67,67,6 4646 7,67,6 Basic-S K50 Basic-S K50 Basic-S K50 5.7 – 9.7 mm – – – – 16500000113 Basic-SBasic-SBasic-S K5 K5 K5000 $

12,5

12,5 12,5 6 45 6666 8,5 6 6 45454545 8,58,58,58,5 4545 8,58,5 Basic-R K33 Basic-R K33 Basic-R K33 9.2 – 11.2 mm – – – – – 15110506 Basic-RBasic-RBasic-R K3 K3 K3333 3

17 5,5 46 5,55,55,55,57,6 5,55,5 46464646 7,67,67,67,6 46Basic-R46 K30 7,67,6 Basic-RBasic-RBasic-RBasic-R K3 K3K3 K30000 Basic-R K30 Basic-RBasic-R K3 K300 6.2 – 8.2 mm – 3 – – – – 15110406

14 14 5,5 46 5,55,55,55,57,6 5,55,5 46464646 7,67,67,67,6 4646 7,67,6 Basic-R K40 Basic-RBasic-RBasic-RBasic-R K4 K4K4 K40000 Basic-R K40 Basic-RBasic-R K4 K400 6.2 – 8.2 mm – 3 – – – – 15110606

14 14 5,5 46 5,55,55,5 5,55,5 7,6 464646 5,55,5 4646 7,67,67,67,6 4646 7,67,6 Basic K10 BasicBasicBasicBasic K10 K10K10 K10 Basic K10 BasicBasic K10 K10 7.7 – 10.7 mm $ – – – – – 16500000115

14 11,6 43 11,611,611,611,614,6 11,611,6 43434343 14,614,614,614,6 4343 14,614,6

3 = Electric strike, complete Type E, 6–12 V AC/DC – = no § = Accessories, optional

DORMA 29 Electric Strikes Accessories

Specification text Order No.

Easy Adapt Electric strike casing cover with latch guide for upgrading DORMA electric strikes as latch-guided units. Suitable for electric strikes of the series Basic, Basic-Safe, Smoke and Fire 447 and the functional versions “Mechanical deactivation” and “Monitoring contact”. Tole- rance compensation is effected using the adjustable latch of the electric strike. Integrated cable conduit for fixing the connection wires to the casing cover with the aid of an adhesive strip included in the pack. Dimensions: approx. 3.6 x 76 x 31.6 mm 15198010

Easy Adapt-TV500 Electric strike casing cover with latch guide for upgrading TV500 as latch-guided units. Suitable for TV500, TV510, TV520. Tolerance compensation is effected using the adjustable latch of the TV500. For use LH and RH. Dimensions: approx. 68 x 20 x 10mm 15198011

GL Module Rectifiers - Module for use with an DC voltage electric strike in combination with AC voltage Input - voltage: 12V – 24 V AC output - voltage: 12V – 24 V DC Current: max. 700mA 15199001

Strike Prep 447 Dummy electric strike. Symmetrical insert for preparation of installation and subsequent retrofitting of electric strikes. With adjustable latch, non-handed, suitable for both over-rebated and flush-closing doors. Dimensions: 76 x 20 x 18.5 mm 15147000

RK bolt locking contact VDS class C no. G 193 082 with a potential free change-over contact for monitoring of the door locking. Degree of protection: IP 68 Connection cable: 4 m LIYY 3 x 0.14 mm2, Switching power: 30 V DC, 200 mA 15198000

30 DORMA Electric Strikes Accessories

Specification text Order No.

TK 311 / TK 411 Electromechanical door contact for monitoring the opening of doors. The spring-mounted ball is operated mechanically when the door is closed and thus ensures that the contact operates very reliably. Floating (no-volt) changeover contact, incl. 4 m connection cable (TK 411 only) Contact rating: 5 A/30 V Colour: white Forend dimensions (W x H x D): approx. 22.5 x 42 x 2.5 mm Dimensions of base section (O x D): approx. 20 x 25 mm

YYTK 311 square forend 15198311 YYTK 311-R rounded egdes 15198321

YYTV 411 square forend, 4m connetion cable included 15198411 YYTV 411-R rounded edges, 4m conection cable inclued 15198421

TK 304 / TK 404 Electromechanical door contact for monitoring the opening of doors. The spring-mounted ball is operated mechanically when the door is closed and thus ensures that the contact operates very reliably. You may adjust the contact inside the forend (adjustment range: 13 mm) Floating (no-volt) changeover contact, incl. 4 m connection cable (TK 404 only) Contact rating: 5 A/30 V Colour: metal-coloured Forend dimensions (W x H x D): approx. 23 x 42 x 3 mm Dimensions of base section (O x D): approx. 18 x 33 mm

YYTK 304 square forend 15198304 YYTK 404 square forend, 4m connection cable included 15198404

DORMA 31 Electric Strikes ES SERIES

ES SERIES ELECTRIC STRIKES — The ES Series electric strikes operate with rim exit devices ES72F Electric Strike features that include a multi ensure door security in private, and accommodates hollow metal, Designed for heavy-duty voltage single solenoid, public and commercial premises, aluminum and wood doors. applications requiring fire-rated selectable lock mode, horizontal are suitable for use with many electric strikes this unique adjustment, and plug-in wire different locks and door types ES62 Electric Strike anti-vibration design prevents connectors Installation is fast and are available in all This rim electric strike is manipulation by vibration. and easy and distributors can conventional operating voltages. completely surface mounted, The ES72F is reliable, durable cut their strike inventory because Whether for standard doors, fire eliminating frame cutting. and economical. this one strike does it all. and smoke check doors or for The one piece conventional doors in emergency and escape keeper design promotes even ES74F & ES79F Electric Strikes ES96F Electric Strike routes, you will be able to find load distribution in the event of Ideal for fire-rated and heavy- Fire-rated offset and centerline the right model to match your attempted forced entry. duty applications these strikes latch entry electric strike particular requirements - all are designed features a saddle- combines strength and quality - assured by DORMA. ES62F Electric Strike mounted housing, and a tamper- convenience in an attractive Designed especially to operate resistant guard for increased design. ES61 Electric Strike with rim exit devices, this 3-hour strength and durability. The architecturally attractive fire rated, rugged stainless ES61 features a hazard-free steel strike accommodates ES84 & ES86 Electric Strike radius design. This stainless steel hollow metal, aluminum, and All-In-One centerline latch entry strike is designed especially to wood doors. electric strike provides standard

Door Frame Type

Hollow Metal Aluminum Wood

Door Lock Type

Cylindrical Mortise Exit Device

Mortise Rim Exit Device

32 DORMA Electric Strikes ES SERIES

Data and features ES 61 ES 62 ES 62F ES 72F ES74F ES79F ES84 ES 86 ES 96F Functions Surface mounted – 3 3 – – – – – – Non handed 3 3 3 3 3 3 3 3 3 Fail secure 3 3 3 3 3 3 – – 3 Fail safe / fail secure Field selectable – – – – – – 3 3 – Monitor switch – – – – – – § § – Door lock type Cylindrical – – – 3 3 3 3 – 3 Mortice – – – 3 3 3 – 3 3 Mortice exit device – – – 3 3 3 – 3 3 Rim exit device 3 3 3 – – – – – – Door frame type Hollow metal 3 3 3 3 3 3 3 3 3 Aluminium 3 3 3 3 3 3 3 – 3 Wood 3 3 3 – – 3 3 3 3 Voltage 12V ac/dc 3 – – 3 3 3 3 3 3 24V ac/dc 3 – – 3 3 3 3 3 3 12V / 24v field selectable – 3 3 – – – – – – Listing Ansi / bhma 156.31 Grade 1 pending 3 3 3 3 3 3 3 3 Ul/cul listing 3 3 3 3 3 3 3 3 3 Fire rated – – 3 3 3 3 – – 3 3 = yes – = no § = option

Series Mode Operating voltage Duty Sound Amps Ohms ES 61 F Fail secure 12 V AC Intermittent Buzz 150 mA 61 Ω 12 V DC Continous Silent 200 mA 61 Ω 24 V AC Intermittent Buzz 70 mA 215 Ω 24 V DC Continous Silent 110 mA 215 Ω ES 62 / ES 62 F Fail secure 12 V AC Intermittent Buzz 330 mA 22 Ω 12 V DC Continous Silent 500 mA 22 Ω 24 V AC Intermittent Buzz 640 mA 22 Ω 24 V DC Continous Silent 240 mA 89 Ω 11 V AC Intermittent Buzz 320 mA 22 Ω 11 V AC Intermittent Buzz 500 mA 22 Ω ES 72 F Fail secure 12 V AC Intermittent Buzz 150 mA 61 Ω 12 V DC Continous Silent 200 mA 61 Ω 24 V AC Intermittent Buzz 70 mA 215 Ω 24 V DC Continous Silent 110 mA 215 Ω ES 74 F / ES 79 F Fail secure 12 V AC Intermittent Buzz 280 mA 37 Ω 12 V DC Continous Silent 375 mA 37 Ω 24 V AC Intermittent Buzz 565 mA 37 Ω 24 V DC Continous Silent 190 mA 148 Ω ES 84 F / ES 86 Fail secure 12 V AC Intermittent Buzz 280 mA 37 Ω Field seletable 12 V DC Continous Silent 375 mA 37 Ω Fail secure 24 V AC Intermittent Buzz 565 mA 37 Ω Field seletable 24 V DC Continous Silent 190 mA 148 Ω ES 96 F Fail secure 12 V AC Intermittent Buzz 280 mA 37 Ω 12 V DC Continous Silent 375 mA 37 Ω 24 V AC Intermittent Buzz 565 mA 37 Ω 24 V DC Continous Silent 190 mA 148 Ω * Intermittent duty = energized less than 1 minute with duty ratio 1:5 Continuous duty = energized 1 minute or more

DORMA 33 Electric Strikes ES SERIES

ES 61

Horizontal Adjustment Mounting Holes

1-3/4" 1-5/8" (44.5 mm) (41.3 mm)

9" 8-1/4" 2-3/8" 1-1/2" 5-1/2" (228.6 mm) (209.6 mm) (38.1 mm) (139.7 mm) (60.3 mm) 5/16" (7.9 mm)

1-5/16" (33.3 mm)

Lock Down Holes

3/8" 3/4" (9.5 mm) (19.1 mm)

ES 62 / ES 62 F

1-3/4" 3/4" (44.5 mm) (19.1 mm) Horizontal Adjustment Mounting Holes

9" 8-1/4" 5-1/2" 1-5/8" (228.6 mm) (209.6 mm) (139.7 mm) (41.3 mm)

Lock Down Holes

34 DORMA Electric Strikes ES SERIES

ES 72F

Dimensions ES72F C 3-3/8" (85.7 mm) D 7/8" (22.2 mm) F 1/8" (3.2 mm) F G 1-3/4" (44.5 mm) H 9/16" (14.3 mm) V L 1-1/2" (38.1 mm) H N 13/32" (10.3 mm) Q P 13/32" (10.3 mm) G C T Q 3-5/8" (92.1 mm) T 1-7/8" (47.6 mm) H U 15/16" (23.8 mm) V 17/32" (13.5 mm) U W 3/4" (19.1 mm) L N

P W

ES74F / ES79F

Dimensions ES74F ES79F

M A 1-1/4" (31.3 mm) 1-3/8" (34.9 mm) C A B 4-7/8" (123.3 mm) 9" (228.6 mm) C 1/8" (3.2 mm) 3/16" (4.8 mm) D 1-1/2" (38.1 mm) 1-1/2" (38.1 mm) E 1-5/8" (41.3 mm) 1-5/8" (41.3 mm) F 4-1/8" (104.8 mm) 8-3/8" (212.7 mm) J F B L G 3/8" (9.5 mm) 5/16" (7.9 mm) H 5/8" (15.9 mm) 11/16" (17.5 mm) J 3-3/8" (85.7 mm) 3-3/4" (95.3 mm) K K 3/4" (19.1 mm) 2-5/8" (66.7 mm) L 4" (101.6 mm) 4-3/16" (106.3 mm) H G M 1-13/16" (46.0 mm) 2-1/16" (52.4 mm) D

M A

J F B

H K G

DORMA 35 Electric Strikes ES SERIES

ES 84 / ES 86

Dimensions ES84 ES86 C 3-11/32" (84.9 mm) 3-11/32" (84.9 mm) D-S N/A 1-5/32" (29.4 mm) F D-L 1-1/16" (27 mm) N/A F 1/8" (3.2 mm) 1/8" (3.2 mm) G 1-1/2" (38.0 mm) 1-1/2" (38.1 mm) H H 47/64" (18.7 mm) 47/64" (18.7 mm) L-S N/A 1-3/16" (30.2 mm) G C L-L 1-1/16" (27 mm) N/A 5/8" (15.9 mm) 5/8" (15.9 mm) H N P 37/64" (14.7 mm) 37/64" (14.7 mm) T Default 21/32" (16.7 mm) Default 21/32" (16.7 mm) U Min 1/2" (12.7 mm) Min 1/2" (12.7 mm) Max 49/64" (19.5 mm) Max 49/64" (19.5 mm) U Default 13/16" (20.6 mm) Default 13/16" (20.6 mm) L-L L-S Min 45/64" (17.9 mm) Min 45/64" (17.9 mm) Max 31/32" (24.6 mm) Max 31/32" (24.6 mm) N N P P T T

D-L D-S

ES84 Low Profile ES86 Standard

36 DORMA Electric Strikes ES SERIES

Strike Plate Options (ES86 shown)

K A E K K A A S E E S S

J B J B J B

M R M R M

S4S Hollow Metal Strike Plate S4 Aluminum Strike Plate S5 Aluminum or Wood Strike Plate

K K A E E A

S S

J B J B

R M R M

S6 Aluminum or Wood Strike Plate S7 Aluminum or Wood Strike Plate

Dimensions S4S S4 S5 S6 S7 A 1-1/4" (31.8 mm) 1-1/4" (31.8 mm) 1-1/8" (28.6 mm) 1-1/4" (31.8 mm) 1-7/16" (36.5 mm) B 4-7/8" (123.8 mm) 4-7/8" (123.8 mm) 5-7/8" (149.2 mm) 6-7/8" (174.6 mm) 7-15/16" (201.6 mm) E 3/8" (9.5 mm) 3/8" (9.5 mm) 1/4" (6.4 mm) 3/8" (9.5 mm) 1/4" (6.4 mm) J 4-1/8" (104.8 mm) 4-1/8" (104.8 mm) 5-3/8" (136.5 mm) 6-1/8" (155.6 mm) 7-7/16" (188.9 mm) K 1-27/32" (46.8 mm) 1-27/32" (46.8 mm) 1-25/32" (45.3 mm) 1-51/64" (45.6 mm) 1-15/16" (49.26 mm) M 5/8" (15.9 mm) 5/8" (15.9 mm) 35/64" (13.9 mm) 5/8" (15.9 mm) 23/32" (18.3 mm) R N/A 5/32" (4 mm) 5/32" (4 mm) 5/32" (4 mm) 5/32" (4 mm) S 49/64" (19.5 mm) 49/64" (19.5 mm) 1-17/64" (32.2 mm) 1-49/64" (44.9 mm) 2-9/32" (57.9 mm)

DORMA 37 Electric Strikes ES SERIES

ES 96F

1-1/4" 3/4" (31.3 mm) (19.1 mm)

3/8" 4-5/8" (9.5 mm) 3-3/8" (117.5 mm) 4-1/8" (85.7 mm) (104.8 mm) 3-1/8" 3-1/4" 4-7/8" (79.4 mm) (82.6 mm) (123.3 mm)

5/8" (15.9 mm) Faceplate for offset locks 1-5/8" (41.3 mm) 3/8" 1-1/4" (9.5 mm) (31.3 mm)

1-5/8" (41.3 mm) 1-3/8" 1-3/4" (34.9 mm) 4-1/8" (44.5 mm) (104.8 mm)

1/4" 1-1/2" 4-7/8" (6.4 mm) (38.1 mm) (123.3 mm)

Faceplate for offset 5/8" locks (included) (15.9 mm)

38 DORMA Electric Strikes ES SERIES

DORMA 39 Electric Strikes ES SERIES

ES61 — The architecturally attractive ES61 electric strikes feature a hazard-free radius design.

This stainless steel strike is before final installation. designed especially to operate Locking socket Allen head cap with rim exit devices and screws prevent loosening and accommodates hollow metal, misalignment which can occur aluminum, and wood doors. with continual door usage. Slotted horizontal holes on the Crossed wires are never a ES61 faceplate allow correct problem, as the coil is not alignment with the exit device polarity-conscious.

Solutions Listings & Approvals ..1000 lb (455 kg) holding ..UL/CUL listed under their force continuing reinspection pro- ..Accommodates rim exit grams and conforms to stan- devices with pullman latch dards UL 1034 and CVXY for projections from 1/2" to 3/4" burglary resistant electric (12.7 mm to 19.1 mm) door strikes ..The 1-5/8" deep electrical ..ANSI/BHMA 156.31, Grade 1 insert* may be horizontally pending adjusted after final ..CSFM pending installation to correct door ..Contributes to U.S. Green misalignments without Building Council, altering the original faceplate LEED® MR Credits location 2.1, 4.1, 4.2, and 5.1 ..AC or DC input acceptable to all models Options & Accessories ..Non-handed ..61DPH ..630 stainless steel finish Double door housing

*A minimum frame depth of 1-5/8" for surface-mounted installations.

How to Order ES61 Series

Voltage Series 24V — 24 VAC/DC Electric Strike — ES 12V — 12 VAC/DC ES 61 630 Rim Strike — 61 630 — Satin Stainless Model Finish

40 DORMA Electric Strikes ES SERIES

ES62, ES62F — The ES62 / ES62F rim electric strikes are completely surface mounted, eliminating frame cutting.

Designed especially to operate attempted forced entry. with rim exit devices, this The heavy-duty housing of the rugged stainless steel strike ES62F is reinforced to eliminate accommodates hollow metal, twisting in the case of imperfect aluminum, and wood doors. frames. The smooth radiused The one piece conventional corners are esthetically pleasing, keeper design promotes even while reducing personal injury load distribution in the event of due to catch hazards. Conventional Keeper (one moving part) Solutions ..1500 lb (680 kg) holding ..Allen head cap screws force for added support and ..No frame cutting required – tamper-resistance surface mounted ..Mounting spacer include ..Conventional keeper design – to provide enhance to latch promotes even load engagement distribution ..Higher grade stainless steel Listings & Approvals ensures superior keeper ..UL/CUL listed under their Lock Down Holes for strength continuing reinspection Added Stability ..Compatible with most exit programs and conforms to devices standards UL 1034 and CVXY ..Accommodates exit devices for burglary resistant electric with latch projections from door strikes. 1/2" to 3/4" .. ES62F conforms to (12.7 mm to 19.1 mm) UL10C GXAY for positive ..Ensures proper latch pressure fire testing, alignment with horizontal 3 hour rated adjustment up to 1/4" ..ANSI/BHMA 156.31, (6.4 mm) to compensate for Grade 1 pending door misalignments ..CSFM pending ..Field selectable voltage ..Contributes to U.S. Green input – 12 or 24 V DC, Building Council, 12 to 24 V AC, 11 to 16 V AC LEED® MR Credits ..Horizontal solenoid prevents 2.1, 4.1, 4.2, and 5.1 manipulation from the vibration ..Modular plug-in wire connec- Options & Accessories tors for fast hook-up ..62DPH ..630 stainless steel finish Double door housing ..Non-handed ..MSK62 Mounting spacer kit 1/16" (1.5 mm) (Additional spacer included) How to Order ES62 Series

DORMA 41 Electric Strikes ES SERIES

ES72 F — The ES72F Series is the answer for heavy-duty applications requiring fire-rated electric strikes.

The unique anti-vibration design locks, or centerline mortise of these commercial duty strikes locks, the ES72F has earned its prevents manipulation by reputation as a durable, reliable, vibration. For use with centerline and economical means of mortise exit devices, cylindrical controlling access.

Solutions Listings & Approvals ..1500 lb (680 kg) holding ..UL/CUL listed under their force continuing reinspection ..ANSI-size faceplate programs and conforms to (1-1/4" × 4-7/8") standards UL 1034 and CVXY ..Accommodates 3/4" latch for burglary resistant electric projections (pullman design door strikes, UL10C GXAY for not inluded) positive pressure fire testing, ..Conventional keeper design – 3 hour rated promotes even load ..ANSI/BHMA 156.31, distribution Grade 1 pending ..Enlarged latch cavity width ..CSFM pending allows compatibility with ..Contributes to U.S. Green cylindrical and centerline Building Council, mortise locks (including LEED® MR Credits 3-piece anti-friction type) 2.1, 4.1, 4.2, and 5.1 and mortise exit devices ..1-1/2" cut-out depth accommodates most aluminum and hollow metal frames ..For use with wide range of door thicknesses (1-3/8" to 2-3/8") ..AC/DC input acceptable for all fail locked models. ..Non-handed ..Standard mounting tabs and fasteners included ..Unique anti-vibration design prevents manipulation ..Available in 12 V or 24 V ..630 stainless steel finish

How to Order ES72F Series

Voltage Series 24V — 24 VAC/DC Electric Strike — ES 12V — 12 VAC/DC ES 72F 630 Commercial Duty, Fire Rated— 630 — Satin Stainless Mortise Strike, Metal Door 72F Model Finish

42 DORMA Electric Strikes ES SERIES

ES74 F, ES79F — The ES74F & ES79F electric strikes are ideal for fire-rated or heavy-duty applications.

The ES74F and ES79F electric guard for increased strength strikes are designed with a and durability. unique built-in anti-vibration Crossed wires are never a feature, a saddle-mounted problem, as the coil is not housing, and a tamper-resistant polarity-conscious.

Solutions Listings & Approvals .. 1500 lb (680 kg) holding ..UL/CUL listed under their force continuing reinspection ES74F Tamper-resistant guard concealed ..Accommodates 1/2" programs and conforms to behind the door frame (12.7 mm), 5/8" (15.9 mm), standards UL 1034 and CVXY increases strength and or 3/4" (19.1 mm) latch for burglary resistant electric prevents manipulation projection (pullman design door strikes, UL10C GXAY for by tools or probes not included) positive pressure fire testing, ..Horizontal adjustment (up to 3 hour rated 1/4" or 6.4 mm) relieves ..ANSI/BHMA 156.31, side-load pressure, ensuring Grade 1 pending proper latch alignment ..CSFM pending ..Saddle-mount housing design ..Contributes to U.S. Green for enhanced strength and Building Council, durability LEED® MR Credits ..Unique anti-vibration design 2.1 4.1, 4.2, and 5.1 prevents manipulation ..Tamper-resistant guard concealed behind the door frame increases strength and prevents manipulation by tool Saddle-mount housing design for enhanced strength and attack durability ..Heavy-duty solid cast stainless steel housing design ES79F ..Energy efficient coil design ..Dual monitor switch (optional) ..Modular plug-in wire connectors for fast hook-up ..Internally mounted solenoid for easier installation ..Non-handed ..Standard mounting tabs, shims, and fasteners included ..630 stainless steel finish

How to Order ES74F/ES79F Series

Voltage Series 24V — 24 VAC/DC Electric Strike — ES 12V — 12 VAC/DC ES 630

Heavy-Duty, Fire Rated — 74F Satin Stainless — 630 Mortise Strike, Metal Door Heavy-Duty, Fire Rated — Finish Mortise Strike, Wood Door 79F Model

DORMA 43 Electric Strikes ES SERIES

ES84, ES86 — The EES84 & ES86 all-in-one centerline latch entry electric strikes Horizontal Adjustment combine several requested key features. (up to 1/4") Standard features include a stile aluminum frames). multi voltage single solenoid, The ES86 standard version is selectable lock mode (no tools ideal when you require 3/4" necessary), horizontal latch projection. adjustment, and plug-in wire Not only will installations be Latch/Keeper connectors. An optional monitor faster and easier, distributors Monitor Switch switch is also available. and installers can cut their The ES84 low profile version strike inventory significantly, Latch Mode accepts 1/2" or 5/8" latch because one strike does it all. Selection Dial projection (perfect for narrow

Solutions Listings & Approvals ..1500 lb (680 kg) holding ..UL/CUL listed under their force continuing reinspection ..Field selectable lock mode – programs and conforms to choose fail secured or fail standards UL 1034 and CVXY safe with the turn of a dial for burglary resistant electric (fail safe mode requires DC door strikes voltage) ..ANSI/BHMA 156.31, ..Field selectable voltage Grade 1 pending input – accommodates ..CSFM pending 12 or 24 V DC and ..Contributes to U.S. Green Lock Mode Selection Dial 12 to 24 V AC (even 16 V AC) Building Council, (no special tools required) in one strike LEED® MR Credits ..1/4" horizontal adjustment 2.1, 4.1, 4.2, and 5.1 ..Dual monitor switch (optional) ..Modular plug-in wire Options & Accessories connectors for fast hook-up ..LKM ..Modular faceplate designs Latch/keeper monitor switch for a variety of frame types (status) and cut outs ..84LE1/2/3 & 86LE1/2/3 ..1-3/16" (ES86), 1-1/16" Low or standard profile lip (ES84) frame depth extension kit for retrofit ..Universal strike kit includes (specify 1, 2, 3) 3 faceplates – S4, S4S, S7 ..84JIG/86JIG ..630 stainless steel faceplate Low or standard profile frame ..Non-handed prep jig ..Trim plate included ..84HK/86HK Standard strike mounting hardware kit ..86LG High profile latch guard ..84TPS Low profile trim plate, 5 pack ..86TPS Standard profile trim plate, 5 pack

44 DORMA Electric Strikes ES SERIES

ES86U standard profile & ES84U low profile with universal strike kit

Includes 3 faceplates ..S4 1-1/4" × 4-7/8" ANSI round corner (aluminum frames) ..S4S 1-1/4" × 4-7/8" ANSI square corner (hollow metal frames) ..S7 1-7/16" × 7-15/16" ANSI round corner (aluminum or wood frames)

How to Order ES84/ES86 Series Voltage Series Finish — 12/24 VDC Electric Strike — ES FSV Field-Selectable 630 — Satin Stainless ES FSV 630 Latch/Keeper— LKM U — Universal Strike Kit w/ 3 Faceplates Low Proﬁle Mortise Strike — 84 Monitor Switch Option S4 — 1-1/4" × 4-7/8" w/ Radius Corners Standard Proﬁle Mortise Strike — 86 — 1-1/4" × 4-7/8" w/ Square Corners Model S4S S5 — 1-1/8" × 5-7/8" w/ Radius Corners S6 — 1-1/4" × 6-7/8" w/ Radius Corners S7 — 1-7/8" × 7-15/16" w/ Radius Corners Strike Plate Options

DORMA 45 Electric Strikes ES SERIES

ES96 F — The ES96F fire-rated offset and centerline latch entry electric strike combines strength and convenience in an attractive design. Adjustable Dead Bolt Keeper The unique saw-tooth adjustment For easy installation, the strike's locator design of the ES96F shim design adjusts vertically allows the installer to move the on the keeper to align with any dead bolt keeper, or plug and latch location, providing up to deadlatch ramp vertically to align 1/8" horizontal adjustment. Adjustable Dead- with a wide variety of mortise Also included are a trim plate latch Ramp locks with offset latches. for inconsistent frame cuts, a There is no need to order special hands-free adhesive backed faceplates – the strike can be template, and all the needed adjusted to work with any drivers to install the strike. Optional Plug-in mortise lock. Everything needed The plug-in latch monitor switch Latch Monitor is in the box, including a option can be added in the field separate faceplate for centerline if monitoring is specified after latch entry. installation. Dead Bolt Plug

Solutions Listings & Approvals ..1500 lb (680 kg) holding ..UL/CUL listed under their force continuing reinspection ..Modular design allows programs and conforms to compatibility with most locks standards UL 1034 and CVXY without having to order for burglary resistant electric special faceplates door strikes, UL10C GXAY for Saw-Tooth ..Adjustable dead bolt keeper positive pressure fire testing, Adjustment and deadlatch ramp 3 hour rated Locator ..Accommodates 3/4" ..ANSI/BHMA 156.31, (19.1 mm) latch projection Grade 1 pending ..Horizontal adjustment (up to ..CSFM pending 1/4" or 6.4 mm) relieves ..Contributes to U.S. Green side-load pressure, ensuring Building Council, proper latch alignment LEED® MR Credits ..Faceplate included for 2.1, 4.1, 4.2, and 5.1 centerline latch entry ..Unique sliding shim design Options & Accessories for up to 1/8" (3.2 mm) ..96LM horizontal adjustment for Latch monitor kit with SPDT misaligned frames switch, can be mounted ..Vertical adjustability of strike anywhere in strike cavity to for precise positioning of correspond to latch position, lockset rated 2 A/24 V DC ..Accommodates up to 1" dead bolt* ..Field-selectable voltage input—12 or 24 V DC or 12–24 V AC ..Anti-tamper security screws ..All installation drivers included ..Optional latch monitor kit ..Low current draw (0,19 A/24 V DC) ..Plug-in wire connector ..Trim plate included ..Non-handed ..630 stainless steel finish

* Night-latch function only, bolt will not release.

46 DORMA Electric Strikes ES SERIES

How to Order ES96F Series

Series Voltage — 12/24 VDC Electric Strike — ES FSV Field-Selectable ES 96F FSV 630 Heavy Duty, Satin Stainless — Fire-Rated Strike — 96F 630 Finish Model

DORMA 47 Layout S. 24 – DORMA CI-2012 • e nglisch USA Stand 07.04.2014

DORMA_U4-Adressen_CI-2012.indd 24 07.04.14 09:18