What Is Al-Cu Bimetal?

Total Page：16

File Type：pdf, Size：1020Kb

What Is Al-Cu Bimetal? Bimetal Consists of Copper Sheet cladded on pure Aluminum Which is Base Metal alloy , both metal being diffused to form an inseparable whole by rolling bonding process. Bimetal , is therefore not and alloy and copper layers are not electro Plating but are rather mechanically welded Aluminum Plates / Sheet . Bi-Metal of Aluminium and Copper has Different name In different Sector and Country . ● Aluminium Copper Bimetal ● Al-Cu Bimetallic Sheet ● Aluminium Copper Cladded Sheet ● Al-Cu clad sheet ● AluCu Bi Sheet ● AlCu BI Sheet ● Bimetallic Sheet ● Cladded Sheet of Aluminium and Copper . What form BiMetal is Available With MetalFort ? 1. Sheet 2. Plates 3. Circle 4. Square Sheet 5. Hexagoanal Sheet 6. Round Sheet 7. Washers 8. Square washers 9. Customized Design . Thickness Available In Bimetal With MetalFort ? 1 mm , 1.5 mm , 2 mm and 3 mm Width Avaibale in BiMetal With MetalFort ? Width : 10 mm to 300 mm Length : 10 mm to 600 mm . What is The Percentage of Aluminium and Copper Respectfully ? Aluminium By weight is 80 % and Copper by 20 % What are The Applications of Bimetallic Sheets? . ● CPU heat Sink ● Terminals of copper connecting conductors with aluminium conductors ● Terminal stirps ● Switchgears ● Substation and Switch-yard Bimetallic Clamps and Connectors ● Substation accessories like bimetallic clamp and connectors ● Sleeve shape insert in terminals in copper & aluminium ● Semiconductor packages ● Safety vent for Li-Ion secondary battery ● Distribution and panel boards ● Current bars & similar parts ● Circuit breakers ● Cable thimbles in copper ● Cable Lugs ● Cable end connectors ● Cable clamp ● Busducts ● Busbar chambers ● Bimetallic Clamp ● As packing & washers bet aluminium & copper bars ● Apparatus construction . .

Copy Link

Recommended publications

Interfacial Microstructures and Properties of Hyper-Eutectic Al–21Si / Hypo-Eutectic Al–7.5Si Bimetallic Material Fabricated by Liquid–Liquid Casting Route
Mech. Sci., 11, 371–379, 2020 https://doi.org/10.5194/ms-11-371-2020 © Author(s) 2020. This work is distributed under the Creative Commons Attribution 4.0 License. Interfacial microstructures and properties of hyper-eutectic Al–21Si / hypo-eutectic Al–7.5Si bimetallic material fabricated by liquid–liquid casting route Mohamed Ramadan1,2 and Abdulaziz S. Alghamdi1 1Mechanical Engineering Department, College of Engineering, University of Ha’il, P.O. Box 2440 Ha’il, Saudi Arabia 2Central Metallurgical Research and Development Institute (CMRDI), Cairo, Egypt Correspondence: Abdulaziz S. Alghamdi ([email protected]) Received: 24 March 2020 – Revised: 10 August 2020 – Accepted: 11 September 2020 – Published: 27 October 2020 Abstract. The bimetal casting process using the liquid–liquid technique was developed to produce a high- quality hyper-eutectic Al–21Si / hypo-eutectic Al–7.5Si alloy bimetal material. Microstructure and microhard- ness were investigated as a function of the time interval between pouring hypo-eutectic and hyper-eutectic alloys. A bimetal material was successfully fabricated using a liquid–liquid casting technique with a 10 s time interval in a permanent mould casting. A unique structure comprised of hyper-eutectic Al–21Si, hypo-eutectic Al–7.5Si and a eutectic interface of 70 µm thickness was obtained. This structure totally differs from that obtained using a higher time interval above 10 s that showed an imperfect interface bond due to the shrinkage cavity and formation of oxides. The hardness variation from the upper zone of 117.5 HV to the lower zone of 76 HV corresponded to the variation in Si and the content of other alloying elements.
[Show full text]
Nickel Immersion Solution and Process for Electroplating of a Bimetal Bearing Utilizing the Same
Europaisches Patentamt J) European Patent Office Qv Publication number: 0 234 738 Office europeen des brevets A1 EUROPEAN PATENT APPLICATION Qy Application number: 87300675.3 © intci.3: C 25 D 5/34 C 25 D 7/10 @ Date of filing: 27.01.87 (30) Priority: 27.01.86 IL 77709 QJ) Applicant: TECHNO INSTRUMENTS INVESTMENTS 1983 LTD. P.O.B. 1233 Bat-Yam 591 128, Metzudat-Beitar Street (43) Date of publication of application : Bat-Yam 59592IIL) 02.09.87 Bulletin 87/36 @ Inventor: Relis, Joseph © Designated Contracting States: 80 Krinrtzi Street AT BE CH DE ES FR GB GR IT LI LU NL SE RamatGan(IL) @ Inventor: Holtzman, Abraham Moshe 23 Usishkin Street Rehovot(IL) @ Representative: Bizley, Richard Edward et al, BOULT, WADE & TENNANT27 Furnival Street London EC4A1PQIGB) (54) Nickel immersion solution and process for electroplating of a bimetal bearing utilizing the same. © The invention provides an immersion solution for the pretreatment of a bimetal bearing, having one portion thereof composed of an aluminum base metal and another portion of the surface thereof composed of a ferrous base metal, com- prising nickel and halogen ions, the solution having an acidic pH. The invention also provides a process for the electroplat- ing of a bimetal bearing having one portion thereof com- posed of an aluminum base metal and another portion of the surface thereof composed of a ferrous base metal, compris- ing the pretreatment step of immersing the bearing, prior to the electroplating thereof, in a solution having an acidic pH and containing nickel and halogen ions, whereby the bearing is provided with a coating from the solution without the use of an external source of electricity, which coating can then be coated with an electroplated deposit without any further in- 00 termediary steps.
[Show full text]
Laser Beam Welding 37
ORNL-TM-4133 Contract No. W-7405-eng-26 Information Division UNCONVENTIONAL WELDING PROCESSES: A BIBLIOGRAPHY Compiled by Ruth M. Stemple Y-12 Technical Library Oak Ridge National Laboratory -NOTICE This report was prepared as an account of work sponsored by the United States Government. Neither the United States nor the United States Atomic Energy Commission, nor any of their employees, nor any of their contractors, subcontractors, or their employees, MARCH 1973 makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, com- pleteness or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe privately owned rights. NOTICE This document contains information of a preliminary nature and was prepared primarily for internal use at the Oak Ridge National Laboratory, it is subject to revision or correction and therefore does not represent a final report". OAK RIDGE NATIONAL LABORATORY Oak Ridge, Tennessee 37830 operated by UNION CARBIDE CORPORATION for the U.S. ATOMIC ENERGY COMMISSION CONTENTS Introduction v Electron beam welding 1 Index 34 Laser beam welding 37 Index 44 Ultrasonic welding 46 Index 56 Friction welding 57 Index 62 iii INTRODUCTION The newer methods for welding have been termed "unconventional" to differentiate them from the older ones, and include electron beam, ultrasonic, laser beam, and friction welding. This bibliography brings together the world literature on these processes through 1971. A separate section is devoted to each process, and the arrangement is by author with an introduction and key-word index. When an article or paper is authored by more than three individuals, only the first is cited.
[Show full text]
Improvement of Shaped Charge Penetration Capability and Disturbation of the Jet by Explosive Reactive Armor
ISSN 1330-3651 (Print), ISSN 1848-6339 (Online) https://doi.org/10.17559/TV-20190216141334 Original scientific paper Improvement of Shaped Charge Penetration Capability and Disturbation of the Jet by Explosive Reactive Armor Hicham KEMMOUKHE, Zijah BURZIĆ, Saša SAVIĆ, Slavica TERZIĆ, Danica SIMIĆ, Miodrag LISOV Abstract: This paper presents a numerical study of the effect of main parameters (liner material, explosive charge, stand-off distance and the presence of the wave-shaper), on one hand, on the jet formation, jet velocity and the jet length, and on the other hand, on the penetration depth. We propose a numerical approach to evaluate their effects on the performance of the shaped charge. AUTODYN-2D software is used for numerical simulations of the shaped charge. The multi material Euler solver of the AUTODYN is used for the jet formation investigation, whereas, Lagrange solver is used for the resolution of the penetration problem. Results have shown that the presence of wave- shaper increases the shaped charge depth penetration. For the standoff of 6 charge calibres, the jet penetration is found to be deepest. It is found that the jet velocity is proportional to the jet energy, and the penetration is proportional to the liner density. The oblique explosive reactive armor is more efficient for the protection of the main target. Numerical results have a good agreement with the data from available literature – with experimental results for the chosen explosives. Keywords: ERA; HEAT; high explosive; metal liner; wave-shaper 1 INTRODUCTION wave shaper which overlaps the liner. This latter increases the tip velocity of the coherent portion of the liner to A shaped charge is generally a high explosive cylinder approximately 10 km/s.
[Show full text]
Bimetallic Layered Castings Alloy Steel – Grey Cast Iron
Volume 48 International Scientific Journal Issue 2 published monthly by the April 2011 World Academy of Materials founding technology so-called method of mould cavity technology is so far limited only to selected non-ferrous alloys such Pages 118-125 and Manufacturing Engineering preparation in which the element which is the working surface as Al-Zn, Al or Al-Sn-Pb [13]. layer of the casting is placed in mould in form of monolithic or granular insert (Fig. 1) directly before pouring molten metal [1-5]. This technology is the most economical way of enrichment the surface of castings, as it allows the production of layer elements directly in the process of cast. Therefore, this technology can provide significant competition for the commonly used Bimetallic layered castings technologies of surfacing by welding and thermal spraying [6-10], because in addition to economic advantages do not generate opportunities for the development of cracks in the heat affected alloy steel – grey cast iron zone, which arises as a result of making layer by welding method. The idea of the proposed technology of layered casting was taken from the relevant mining industry method of manufacture of T. Wróbel* composite surface layers based on granular inserts from Fe-Cr-C Foundry Department, Silesian University of Technology, alloy and placed in mould directly before pouring molten metal. ul. Towarowa 7, 44-100 Gliwice, Poland Obtained in this way working surface layers have a high hardness and metal-mineral wear resistance [1,3,11]. * Corresponding author: E-mail address: [email protected] Fig. 2. Technology of bimetallic layered castings with use of two Received 04.02.2011; published in revised form 01.04.2011 gating systems: 1 - cast iron layer, 2 - cavity (preheater) 3 - cast steel plate, 4, 5 - gating [4] ABSTRACT Purpose: In paper is presented technology of bimetallic layered castings based on founding method of layer coating directly in cast process so-called method of mould cavity preparation.
[Show full text]
MÖSSBAUER and XRD STUDY of Al-Sn LINISHED STEEL BIMETAL
MÖSSBAUER AND XRD STUDY OF Al-Sn LINISHED STEEL BIMETAL ALLOY E. Kuzmanna, L. da Silvab,c, S. Stichleutnera,d, M. El-Sharifb, Z. Homonnaya, Z. Klencsáre, L. Szirákia, C.U. Chisholmb and G.B. Lakb a Institute of Chemistry, Eötvös Loránd University, Budapest, Hungary b Glasgow Caledonian University, Glasgow, Scotland, U.K. c MAHLE Engine Systems UK Ltd., Kilmarnock, U.K. d Nuclear Analysis and Radiography Department, Centre for Energy Research, HAS, Budapest, Hungary e Institute of Materials and Environmental Chemistry, Research Centre for Natural Sciences, HAS, Budapest, Hungary e-mail of the corresponding author: [email protected] Abstract Aluminium alloy free CS1 type steel (0.06 wt% C, 0.45 wt% Mn) and samples of cold roll bonded steel bimetal alloys (MAS15 and MAS16) were fabricated and investigated by X- ray diffraction (XRD), 57Fe conversion electron Mössbauer spectroscopy (CEMS) at room temperature. XRD has revealed only the existence of the alpha iron solid solution (steel) phase in the steel only sample, while identified steel and metallic Al and Sn constituent phases in the bimetallic alloys. 57Fe Mössbauer spectroscopy revealed the presence of 4% secondary iron-bearing phase attributed mainly to iron oxide/ oxyhydroxides (ferrihydrite) besides the steel matrix on the surface of the steel sample. A significant difference between the occurrences of the secondary phase of differently prepared bimetal alloys found in their 57Fe CEM spectra allowed to identify the main phase of debris as different iron oxide/ oxyhydroxides. Keywords Lined steel, Al-Sn bimetal alloys, interfaces, Mössbauer spectroscopy, X-ray diffraction 1. Introduction Bearings manufactured from cold roll bonded (CRB) Al/AlSn/Al/ steel composite materials possess superior tribological wear and strength characteristics making them the ideal choice for both passenger car and truck vehicle bearings in the automotive manufacturing industry.
[Show full text]
Strong Bimetal Pieces & Hybrid Parts to Power the Modern World
Strong Bimetal Pieces & Hybrid Parts to Power the Modern World It may come as no surprise that metals are at the heart of powering and sustaining our modern, industrial world. One such NobelClad solution is delivering for the marine, railway, road transport, precision and high technologies—transition joints. These composite inserts make it possible to permanently join dissimilar metals in structural, electrical and piping designs. TRANSITION JOINTS: ENDLESS ‘SOLID-STATE’ SOLUTIONS When joining dissimilar metals that cannot otherwise be combined by fusion welding, like aluminum and steel, NobelClad uses a ‘solid-state’ welding process to join them, creating a transition joint with an extremely strong metallurgical bond. These bimetal joints can be welded – on either side – by conventional techniques, so fabricators do not need to invest in additional training or equipment to use transition joints in challenging applications. Industries are turning to transition joints because they open a world of possibilities with alloy metals without sacrificing application reliability. They can be used to join steel or stainless steel to reactive metals, and nickel, copper and aluminum alloys. The bimetal transition joints can be machined, drilled, bent and pressed into different shapes—round, cylinder, beam and square are all possible. Transition joints can be used in thin or thick applications, and short or long profiles, and NobelClad is the world’s leading-edge provider of these advanced solutions. TRANSITION JOINTS IN USE AROUND THE WORLD You needn’t look far to see bimetal transition joints at work in the world today. Lighter and stronger than riveted systems, transition joints reduce application weight, fight corrosion and wear, and hold up better in wet environments.
[Show full text]
A New Approach Toward Elimination of Slug in Shaped Charge Perforating
FEATURE ARTICLE A New Approach Toward Elimination of Slug in Shaped Charge Perforating SOCIETE DE PROSPECTION ELECTRIQUE J. DELACOUR PARIS, FRANCE M. P. lEBOURG SCHLUMBERGER WELL SURVEYING CORP. Downloaded from http://onepetro.org/jpt/article-pdf/10/03/15/2238755/spe-941-g.pdf by guest on 30 September 2021 W. T. BELL HOUSTON, TEX. MEMBERS AIME Abstract ing of shaped charge tools, as applied thoroughly explored, both classically to oilwell perforating, has evolved from and experimentally by Pugh, et al."1.4 Since the advent of the perforation simple surface shooting to tests con In considering the formation of the flow laboratory, increased attention has ducted in a flow laboratory in which jet and the slug, let us refer to a sim been focused on new designs of shaped a study of the charge could be made ple schematic of a conventional, cop charges as applied to ai/well perforat under simulated down-hole conditions'. per-lined shaped charge (Fig. 1). This ing. Data derived from the flow lab In the flow laboratory, pressures and type charge will produce (1) a high oratory, in which charges are subjected temperatures were elevated prior to speed penetrating jet with a velocity to simulated down-hole tests, indicate firing the charge into a target of me approximating 8,000 m/sec, and (2) that serious perforation plugging often dium-hard sandstone material. An a relatively slow moving slug or car exists due to the elltrance of slugs into elaborate system was devised for firing rot, the velocity of which reaches 800 the perforated hole.
[Show full text]
Bimetal Disc Thermostat
ERMEC, S.L. BARCELONA Tel. +34 902 450 160 ERMEC, S.L. - MADRID [email protected] C/ Francesc Teixidó, 22 [email protected] C/ Puerto Rico, 4 [email protected] 08918 Badalona SPAIN www.ermec.com 28222 Majadahonda (Madrid) SPAIN Bimetal Disc Thermostat Product Information and Application Notes Bimetal Disc Thermostat Therm-O-Disc ERMEC, S.L. BARCELONA Tel. +34 902 450 160 ERMEC, S.L. - MADRID [email protected] C/ Francesc Teixidó, 22 [email protected] C/ Puerto Rico, 4 [email protected] 08918 Badalona SPAIN www.ermec.com 28222 Majadahonda (Madrid) SPAIN Bimetal Disc Thermostat Application Notes Operating Principles Bimetal disc thermostats are thermally actuated switches. When the bimetal disc is exposed to its predetermined calibration temperature, it snaps and either opens or closes a set of contacts. This breaks or completes the electrical circuit that has been applied to the thermostat. Therm-O-Disc 6 Bimetal Disc Thermostat ERMEC, S.L. BARCELONA Tel. +34 902 450 160 ERMEC, S.L. - MADRID [email protected] C/ Francesc Teixidó, 22 [email protected] C/ Puerto Rico, 4 [email protected] 08918 Badalona SPAIN www.ermec.com 28222 Majadahonda (Madrid) SPAIN There are three basic types of thermostat switch actions: • Automatic Reset: This type of control can be built to either open or close its electrical contacts as the temperature increases. Once the temperature of the bimetal disc has returned to the specified reset temperature, the contacts will automatically return to their original state. • Manual Reset: This type of control is available only with electrical contacts that open as the temperature increas- es.
[Show full text]
High-Velocity Impact Welding Process: a Review
metals Review High-Velocity Impact Welding Process: A Review Huimin Wang 1 and Yuliang Wang 2,3,* 1 National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China; [email protected] 2 School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China 3 Beijing Advanced Innovation Center for Biomedical Engineering, Beihang University, Beijing 100191, China * Correspondence: [email protected]; Tel.: +86-1861-252-5756 Received: 26 December 2018; Accepted: 27 January 2019; Published: 28 January 2019 Abstract: High-velocity impact welding is a kind of solid-state welding process that is one of the solutions for the joining of dissimilar materials that avoids intermetallics. Five main methods have been developed to date. These are gas gun welding (GGW), explosive welding (EXW), magnetic pulse welding (MPW), vaporizing foil actuator welding (VFAW), and laser impact welding (LIW). They all share a similar welding mechanism, but they also have different energy sources and different applications. This review mainly focuses on research related to the experimental setups of various welding methods, jet phenomenon, welding interface characteristics, and welding parameters. The introduction states the importance of high-velocity impact welding in the joining of dissimilar materials. The review of experimental setups provides the current situation and limitations of various welding processes. Jet phenomenon, welding interface characteristics, and welding parameters are all related to the welding mechanism. The conclusion and future work are summarized. Keywords: impact welding; impact velocity; impact angle; welding interface 1. Introduction Welding technique has wide applications in the areas of aerospace, automobiles, shipbuilding, pressure vessels, and bridges.
[Show full text]
Analysis of the Forming Characteristics for Cu/Al Bimetal Tubes Produced by the Spinning Process
Marquette University e-Publications@Marquette Mechanical Engineering Faculty Research and Publications Mechanical Engineering, Department of 3-2019 Analysis of the forming characteristics for Cu/Al bimetal tubes produced by the spinning process Kai Jin Qiwei Yuan Jie Tao Joseph P. Domblesky Xunzhong Guo Follow this and additional works at: https://epublications.marquette.edu/mechengin_fac Part of the Mechanical Engineering Commons Marquette University e-Publications@Marquette Mechanical Engineering Faculty Research and Publications/College of Engineering This paper is NOT THE PUBLISHED VERSION; but the author’s final, peer-reviewed manuscript. The published version may be accessed by following the link in the citation below. The International Journal of Advanced Manufacturing Technology, Vol. 101, No. 1-4 (March 2019) : 147-155. DOI. This article is © Springer and permission has been granted for this version to appear in e-Publications@Marquette. Springer does not grant permission for this article to be further copied/distributed or hosted elsewhere without the express permission from Springer. Analysis of the forming characteristics for Cu/Al bimetal tubes produced by the spinning process Kai Jin College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China Qiwei Yuan College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China Jie Tao College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China Joseph Domblesky Department of Mechanical Engineering, Marquette University, Milwaukee, WI 53005, USA Xunzhong Guo College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China Abstract Tube spinning technology represents a process with high forming precision and good flexibility and is increasingly being used in the manufacture of bimetal composite tubular structures.
[Show full text]
Microstructural, Mechanical and Corrosion Investigations of Ship Steel-Aluminum Bimetal Composites Produced by Explosive Welding
metals Article Microstructural, Mechanical and Corrosion Investigations of Ship Steel-Aluminum Bimetal Composites Produced by Explosive Welding Yakup Kaya ID Technology Faculty, Karabük University, Karabük 78050, Turkey; [email protected]; Tel.: +90-370-418-7100 Received: 19 June 2018; Accepted: 12 July 2018; Published: 15 July 2018 Abstract: In this study, explosive welding was used in the cladding of aluminum plates to ship steel plates at different explosive ratios. Ship steel-aluminum bimetal composite plates were manufactured and the inﬂuence of the explosive ratio on the cladded bonding interface was examined. Optical microscopy (OM), scanning electron microscopy (SEM), and energy dispersive spectrometry (EDS) studies were employed for the characterization of the bonding interface of the manufactured ship steel-aluminum bimetal composites. Tensile-shear, notch impact toughness, bending and twisting tests, and microhardness studies were implemented to determine the mechanical features of the bimetal composite materials. In addition, neutral salt spray (NSS) tests were performed in order to examine the corrosion behavior of the bimetal composites. Keywords: bimetal composite; explosive welding; ship steel; aluminum; mechanical features; corrosion 1. Introduction Today’s ship and offshore construction designers face complex problems in selecting materials that provide minimization of topside weight and protection against marine corrosion-all within a reasonable budget [1]. With the development of modern industry, applications of single metallic constituents are unable to meet these requirements. Instead, with the respective merits of two metallic components, the bimetal clad plate is capable of achieving the performance that single metal constituents fail to provide [2]. The usual solution to this problem is to employ a variety of metals throughout the structure, each being selected for features appropriate for the speciﬁc component [3].
[Show full text]

​What Is Al-Cu Bimetal?

What Is Al-Cu Bimetal?