Curricular Summary Janhs Rendiles Ochoa.

Professional profile: Industrial Engineer and Higher University Technician in Industrial Safety with 27 years of experience in the area of Safety, Occupational Health and the Environment, in projects for the Oil & Gas, Refining, Electric Power Generation, Petrochemical, Mining, Construction, precommissioning, commissioning industries. Plant, among others, in each of these professional stages I have held positions of Coordination, superintendency and Management. Knowledge and application of current national and international Legislation on Safety, Hygiene and Environment, its regulations and technical standards. Certified in OSHA 1910 General Industry Standards (DOL 900144415 USA), achieving extensive experience in identifying Hazards processes, taking actions to eliminate, minimize or control these dangerous processes, writing management reports following the guidelines established in the current legislation, clients and policies of each organization, preparation of a training matrix adapted to legal requirements, Coordinate the activities of each work team, monitoring compliance with the provisions of the plans, programs and matrices previously prepared and approved. Management of integrated management systems (Occupational health and safety management system - OHSAS 18001 Standard), Management of ISO 14001 Standards Implementation of an environmental management system. Knowledge of National and international regulations in identifying and preventing risks in activities such as: Work at Height, handling of dangerous energies, excavation work , handling of mobile equipment, confined spaces, lifting of loads, communication of risks, pressure vessels, hot jobs (cutting, welding), electrical work risks, handling of hazardous materials, fire prevention and control, preparation of emergency plans. Management of interpersonal relationships, leadership, adequate response to work under pressure, proactive, dynamic, management of tools under the Office environment (Word, Excel, Power point, Internet, Adobe photoschop, among others)

Personal information Identity Card: V- 10.596.984 Passport: 133186970 Nationality: Venezuelan Date of Birth: 06/12/1969 Address: Punto Fijo Edo. . Telephones: +58-269-2451267- 2451263 /414- 8115558 Email: [email protected]; [email protected] INPSASEL Registration: ZUL1210596984

Academic Training

Title: Industrial Engineer.

University: Santiago Mariño Polytechnic University Institute

Title: Higher Technician in Industrial Safety

University: Antonio José de Sucre University Institute

.

Work experience

2018-2020 - Company: Aliva Stump, C.A Position: Superintendent of Safety, Health and Environment. Management, Safety, Hygiene and Environment management in the construction of the Second Pellas Production Line For Ferrominera del Orinoco in Puerto Ordaz Bolívar State - Venezuela. Its nominal production capacity is 3.3 million tons of pellets per year, for direct reduction and / or for blast furnaces. This pre-reduced derives from the pelletization of fine iron ore, plus bentonite and dolomite, raw material of vital importance for the briquetting and steel industry. For this project, there was a direct labor force of 1,300 workers.

2013-2018 - Company: PPE Pro Planta Consortium. Position: Safety, Health and Environment Manager. Management of the Hygiene and Environment security management of the PPE Pro Planta Consortium, subcontractors hired to carry out the construction activities of the Paper Pulp Plant for the PULPACA Socialist Production Company in the Population of Macapaima, Anzoátegui State. This Plant has the particularity of using Caribbean pine and recycled paper as raw material using the BCTMP process (bleached chemical-thermo-mechanical pulp) having a production capacity of 250,000 tons per year of ecological newspaper. During this experience it was held under the responsibility of seven (07) construction companies where each of them carried out Construction activities. The labor force that intervened for the execution of the project was 1,800 workers, adding a workforce specialized in Occupational Health Safety and environment. Additionally, it was under my responsibility the Occupational Health department which was integrated by two occupational doctors and 10 technicians in emergency responses. 2012-2013 - Company: Vepica (Venezuelan Integrated projects) Position: Safety, Health and Environment Coordinator. Coordinate the Hygiene and Environment safety management of the subcontractors hired to carry out the construction activities of the New General Hospital in San Fernando Apure State. Type II hospital with a capacity of 250 beds. There was a workforce of 800 workers. For this project, constant monitoring was maintained in compliance with the sanitary construction standards established in current national and international legislation.

2011-2012 - Company: DuroFelguera /Y&V Ingeniería Position: Coordinator of Management in Safety, Health and Environment. Coordinate the Hygiene and Environment safety management of the subcontractors hired to carry out the construction activities of the New Combined Cycle Thermoelectric Plant (El Sitio Plant) in the Tuy Edo valleys. Miranda - Venezuela. The El Sitio thermoelectric plant is made up of two groups in multi -axis configuration, both having two gas turbines and one steam turbine which has a generation capacity of 1,080MW. It will be powered by gas and will also have the possibility of feeding with liquid fuel for which it will have a medium diesel storage system. The turbines were supplied by technological multinational Siemens. The project also included the installation of a water treatment plant, as well as an effluent treatment plant. For this majestic project led by the Spanish company Durofelguera, 12 contractor companies were hired, adding together a total of 2,200 workers. I had the responsibilit y to plan, coordinate and ensure compliance with the legislation, rules and procedures of Safety, Occupational Health and the environment, not having disabling accidents 2005-2011 - Company: Jantesa Ingenieria S.A Position: Safety, Health, Environment and Protection Manager. During the time worked at Jantesa Ingeniería I had the opportunity and the pleasure of planning, developing, auditing and being at the forefront of projects of great importance and importance for the Country, among which you can indicate:  Interconnection Project of the Central East and West Transportation System ICO Phase II Gas Compressor Plant - Morón. PDVSA GAS - State - Venezuela. This development project in the form of a Consortium between the companies Jantesa Ingeniería and Siemens carrying out the Engineering, procurement and construction of a Gas Compressor plant for the Venezuelan state-owned company PDVSA Gas division where two Gas compressor turbines supplied by the Siemens Company were installed. with a compression capacity of 110 million cubic feet of gas per day from the east of the country and to be sent to the west of the country. This project was carried out with a workforce of 800 workers distributed in 5 Contractors.  Project Engineering and construction of Facilities, Extraction, storage and handling o f Orimulsion for the company SINOVENSA - PDVSA Campo Petrolero Morichal Monagas State- Venezuela The project consisted of the engineering and construction of a reception station, improvement and distribution to the storage yards, manufacture and installati on of 240 km, of pipes of different diameters, 120 km of 115kv power lines, manufacture of storage tanks yard of 500,000 barrels a total of three tanks and the firefighting system. For this, 8 contractor companies and a workforce of 1,300 workers were hir ed.  Administrative activities, preparation and certification of the company in OHSAS 18001/18002, ISO 9001, achieving certification in Venezuela, Colombia and Panama. Another of the assignments I had under my responsibility was to perform compliance audits of the Safety, Occupational Health and Environment Management System in the different projects and administrative offices of the company. 2003-2004 - Company: Petrolera Petrozuata - Inelectra Superintendent of Safety, Health and Environment. Coordinate the Hygiene and Environment safety management of th e subcontractors hired for the Restoration Project, which consisted of the adaptation of the production system of the Extra Heavy Cruiser Improver Petrozuata in the Petroleum and Petrochemical Complex José Antonio Anzoátegui- Venezuela. For this, Petrozuata hires the Inelectra Engineering Company to carry out the inspection and monitoring of the work, and in turn the hiring of 6 construction companies for the execution of the project, having a workforce of 900 workers, it should be noted that all the construction were carried out with the Crude improver in operation, not having accidents with personal injury or damage to facilities. 2003-2003 – Company: Costa Norte Construcciones – Progesi Position: Safety, Health and Environment Supervisor Supervise the works of Assembly of Structures and equipment, complying with the standards and procedures of Hygiene and Environment security for the Hamaca Project, which was the Construction of the Extra Heavy Cruiser Improver for the Ameriven Oil Company in the José Antonio Anzoátegui Petroleum and Petrochemical Complex -Venezuela. Having under the responsibility a group of 150 workers distributed in crews as well as heavy lifting equipment including 300tn cranes.

2002-2002 - Company: Constructora Mecavenca Position: Safety, Health and Environment Coordinator Coordinate the Hygiene and Environment safety management for the Restoration Project which consisted of the adaptation of the production system of the Extra Heavy Cruiser Improver Petrozuata in the José Antonio Anzoátegui- Petroleum and Petrochemical Complex, Venezuela. For the execution of the project, it had a workforce of 300 workers, it should be noted that all the construction work was carried out with the Crudo improver in operation, not having accidents with personal injury or damage to the facilities.

2002-2002 - Company: Constructora GBC Position: Safety, Health and Environment Supervisor Supervise the works of Assembly of Structures, equipment, hot works, among others, complying with the standards and procedures of hygiene, hygiene and environment for the Valcor Project, which consisted of the Adaptation to increase the production of light oil refining to 200,000 barrels. newspapers of the Puerto La Cruz oil refinery which is managed by the Venezuelan Petroleum PDVSA, being located in Puerto La Cruz, Anzoátegui state - Venezuela. Having under the responsibility a group of 90 workers distributed in crews as well as heavy lifting equipment. 2001-2002 – Company: Petrolera Petrozuata - Willor Position: Safety, Health and Environment Coordinator For the Start-up and Commissioning of the Petrozuata Extra Heavy Oil Improver located in the José Antonio Anzoátegui-Venezuela Petroleum and Petrochemical Complex. I was assigned to Operations management where I developed operational procedures aimed at process safety, as well as being the link between Operations-Maintenance and Contractors 2000-2000 – Company: Cianca Construcciones Position: Safety, Health and Environment Coordinator Coordinate the management of safety, hygiene and environment. Building Project Package I Sincor-Contrina Crude Improver Sincor Petrochemical complex Petrochemical José Antonio Anzoátegui Venezuela. This project had a workforce of 350 workers, without accidents. 1999-2000 – Company: Tecnoconsult – Cianca Construcciones Position: Safety, Health and Environment Coordinator Coordinate the Hygiene and Environment safety management for the Tecnoconsult - Cianca Construcciones Consortium for the Petrochemical Dock Construction Project for the PDVSA Pequiven Affiliate located in the José Antonio Anzoátegui- Venezuela Petroleum and Petrochemical Complex. 1999-1999 - Company: C.B. I of Venezuela. Position: Inspector of Safety, Health and Environment. Assigned to the dismantling and assembly of the dome of the G-145 gasifier which has a weight of 750 Ton, for this purpose a 1500 Ton crane was used during the scheduled Major Maintenance of the Coker Plant of the PDVSA Paraguaná Refining Center located in Punto Fixed state Falcón Venezuela

1998-1999 – Company: Constructora Pantersa Position: Safety, Health and Environment Supervisor Supervise the activities of the Installation of Pump Systems in the F.D.U Plant, complying with the operational health and safety procedures at the PDVSA Refining Center Paraguaná located in Punto Fijo, Falcón state, Venezuela. 1998-1998 - Company: Constructora Refrasa Position: Safety, Health and Environment Supervisor Supervise the maintenance activities in the insulation systems and the construction of scaffolds, complying with the operational health and safety procedures at the PDVSA Paraguaná Refining Center located in Punto Fijo, Falcón state, Venezuela. 1997-1998 - Company: Andamios Anderson of Venezuela Position: Inspector of Safety, Health and Environment. Inspection in the Construction of Cuplok type Scaffolds during the Major Maintenance of the FCAY Plant, complying with the operational health and safety procedures at the PDVSA Paraguaná Refining Center located in Punto Fijo state Falcón Venezuela

1995-1997 – Company: Constructora Ajuria Position: Safety, Health and Environment Supervisor Coordinate the management of Hygiene and Environment security in Mechanical and Civil Maintenance work, complying with the operational health and safety procedures at the PDVSA Refining Center Paraguaná located in Punto Fijo state Falcón Venezuela

1994-1995 – Company: Constructora ATA Position: Safety, Health and Environment Coordinator Coordinate the management of Hygiene and Environment safety in the Electricity and Instrumentation works of the HDT2 plant (Hydro - Sulfur treatment plant) for the PARC Project (Adaptation Project of the Cardón Refinery), located in the Paraguaná Refinery Center PDVSA - Fixed point Venezuela. For this project I have a workforce of 120 workers

1994-1994 - Company: Constructora Vamenca Position: Inspector of Safety, Health and Environment. Follow-up in compliance with occupational health and safety aspects in the Major Scheduled Maintenance works of the H-DA4 Plant and Start-up of the Coker (Cray) Plant Amuay Refinery of the Paraguaná Refinery Center PDVSA - Venezuela

1994-1994 – Company: Constructora Sermeca Position: Safety, Health and Environment Supervisor Maintenance of Mechanical Metal at the Amuay Refinery at the Paraguaná Refining Center. PDVSA Venezuela 1993-1994 – Company: Constructora Ajuria Position: Safety, Health and Environment Supervisor Repair of Towers, Drums, Heat Exchangers, Boilers Cardón Refinery, Centro Refinador Paraguaná PDVSA Venezuela

1993-1993 – Company: Constructora Flag Instalaciones Position: Inspector of Safety, Health and Environment. Inspection of maintenance work for Offshore Gas Compressor Plants in Lake Venezuela for PDVSA Exploration. 1992-1993 – Company: MEI Contracciones Position: Inspector of Safety, Health and Environment. Inspection of the Occupational Health and Safety aspects in the Major scheduled maintenance works of the Polyethylene Vinyl Plant in Pequiven El Tablazo. PDVSA subsidiary, located in the El Tablazo Petrochemical Complex, Zulia state, Venezuela 1991-1992 – Company: Ehcopex Construcciones Position: Inspector of Safety, Health and Environment Inspection of construction and maintenance works for offshore gas compressor plants in Lake Maracaibo Venezuela for PDVSA Exploración.

1991-1991 – Company: Constructora Condalca Position: Inspector of Safety, Health and Environment Inspection of Occupational Health and Safety aspects in the Construction of Roads and Brocals of the Propilven Pequiven El Tablazo Plant in Pequiven El Tablazo. PDVSA subsidiary, located in the El Tablazo Petrochemical Complex, Zulia state, Venezuela

1990-1991 – Company: Constructora Rivaco Fochi Position: Inspector of Safety, Health and Environment Inspection of the Occupational Health and Safety aspects in the construction works of the Propilven Pequiven El Tablazo Plant, a subsidiary of PDVSA, located in the El Tablazo Petrochemical Complex, Zulia state, Venezuela

Courses / Training • OSHA Certification 026-09 Venezuela, OSHA Certification (DOL) 900144415 USA. 30 hours • Prevention and Control of H2S (Hydrogen Sulfide) • V Technical Conference on Industrial Safety, Environment and Occupational Hygiene • OSHA 1910 Guidance: Safety and Hygiene General Industry - OSHA Certification 060-08 Venezuela, OSHA Certification (DOL) 700522774 USA. 10 hours • I National Congress on Prevention, Health and Safety at Work • Safety and Survival at Sea • Procedures for Replacement of Filters and Cartridges. • Leadership in Security • Hearing Protection Seminar • Cuplok Traing Certificate • Vehicle Driving Safety • Safety Based on Behavior • Teaching induction • Seminars on Legal and Contractual Aspects Relating to Industrial Safety and Hygiene. • Stop for Safety • Accident investigation • Integral Protection Workshop for Supervisors • Scaffolding Safety. • Risk analysis. • Management and Risk of HF. • Risks in Confined Spaces • Skydiving. • Identification of Risks • Induction and Evacuation Guides • Basic First Aid • Work Permits and Explosimetry. • Fire Prevention and Control.