DOCSLIB.ORG

Complete Instructions and Setup for Clincher Fence Machinetm and Smartfence

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Complete Instructions and Setup for Clincher Fence Machinetm and Smartfence INCLUDES COLLECTION OF SIXTY, 16” long TEMPLATES and FULL SIZE PLANS FOR MAKING: • Box joints • Double-Double Box joints • Half-Blind Dovetails • Double Dovetails • Through & Double Through Dovetails • Jointech’s exclusive BoxtailsTM FULLY ILLUSTRATED WITH OVER • Plus 18 Scales for repetitive cutting 1 7 DETAILED ULL COLOR Cutting intervals range from /8” up to /8”. 200 F - DRAWINGS AND PHOTOS, PLUS NUMEROUS SHOP TIPS AND TECHNIQUES. Complete Instructions and Setup for MADE IN THE U.S.A. Manufactured by: TM ® Clincher Fence Machine and SmartFence . Jointech, Inc. SETUPS for CABINET MAKING OPERATIONS P.O. Box 790727 San Antonio, TX 78279 • Edge Jointing • Frames • Raised Panels Customer Svc : (210) 524-9104 Facsimile: (210) 377-1282 email:[email protected] Introduction CLINCHER FENCE MACHINE.....................................................................................2 Templates and scales Fence Machine Systems Warranty OPTIONAL ACCESSORIES.........................................................................................3 Setting Up SYSTEM SETUP and ASSEMBLY...............................................................................4 Mounting CLINCHER Mounting Fence Dust Collection Attachment Vertical Push Fixture assembly X-Y Stop Block operation Cutting Profile Inserts Cabinet Making EDGE JOINTING......... ................................................................................................6 Operations SHAPING OPERATIONS .............................................................................................7 Frames Raised Panels Joint Making MAKING THE PERFECT JOINT ................................................................................10 Operations Getting Started Selecting the right Template for your project Installing and using CLINCHER Templates Centering for perfect symmetry - Using the Rabbit ....................................11 Steps for centering Determine Pin and Tail Cuts.......................................................................12 Template Alignment BOX JOINTS................................ ..............................................................................13 Setting Depth of Cut for Box Joints HALF-BLIND DOVETAILS..........................................................................................14 Setting Depth of Cut for all Dovetail Joints THROUGH DOVETAILS.............................................................................................16 DOUBLE DOVETAILS ................................................................................................18 DOUBLE-DOUBLE BOX JOINTS...............................................................................20 BOXTAIL JOINTS......... ..............................................................................................22 THE MITER SPLINE JOINT.......................................................................................24 SLIDING DOVETAILS.................................................................................................24 REPETITIVE SCALE TEMPLATES.............................................................................24 SAFETY - READ ALL INSTRUCTIONS • When using a power tool with CLINCHER, • If CLINCHER is mounted to a moveable base, • Before making a cut, always make sure that the follow the safety instructions in the tool’s always secure base to work surface by CLINCHER cam clamp is fully locked down and instruction manual. Use any safety guards clamping, screws, or otherwise fastened before machine setup is secure in place. required for their safe use. Remember that all using. power tools are inherently dangerous. Make • Whenever a cutting operation requires that your sure that you thoroughly understand their • Always tighten SmartFence sliding sections hands come near or over a bit or blade, operation and their safety features before you clamping knobs before any cutting operation. ALWAYS USE A GOOD PUSH BLOCK or push use them. Avoid applying excessive force when clamping. stick to protect your fingers. When using a profile insert, always securely • Always wear safety glasses and hearing engage between both sliding sections. • Before performing any cutting operation, protection when operation of power tools. carefully think it through. Anticipate any • Always align center of SmartFence to center of situations that can be potentially dangerous, • Always turn off power to any other tools prior to router and cutter. Never use a cutter larger such as: grabbing, kickback, splintering, or any adjustment of CLINCHER. Allow a cutting than 4” in diameter nor greater than 2” in height, exposed fingers, and take steps to insure that tool to come to a complete stop before including any bearing. they don’t happen. repositioning of fence, sliding section or profile insert. With Jointech leading the way, the method of router table woodworking and The Jointech Template Collection includes sixty, 16” long templates and joinery has become the most exciting and sought after means to perform scales, plus step-by-step instructions to guide you through the use of the shaping and cutting operations with high precision. The Jointech Ultra- templates to make box joints, half-blind dovetails, through dovetails, double Precision Woodworking System which you have purchased will be the best dovetails, double-double box joints, and the exotic Jointech BoxtailTM .Even investment that you have made over any other tool in your shop. Far superi- the novice, who perhaps has never made a simple dovetail or box joint, will or to any other in quality, workmanship and versatility, the accuracy that this quickly be able to produce beautiful and intricate joinery in their projects. new tool brings to your woodworking shop is unprecedented. Made entirely in San Antonio, Texas, Jointech’s American-made The CabinetMaker’s System is capable of jointing, routing, rabbeting, dado- Woodworking Systems have been met with enthusiastic approval of many ing, making raised panels, and rail and stile frames. It can function as a saw thousands of woodworkers, hobbyist and professional, as well as leading table fence, drill press positioner and much more. This one System will give experts in the field. you the versatility needed to perform fine joinery and all cabinet-making operations. We thank you for choosing Jointech. CLINCHER Fence Machine CAM-HANDLE CLAMP POSITIONS: 1) UPRIGHT - Carriage is released from leadscrew for full movement over its range. 2) 45 DEGREES - Position to make micro-adjustments with thumbwheel. 3) DOWN - Carriage is fully locked in place for a cutting operation. MICRO-ADJUST THUMBWHEEL Each detent represents .001” of fence movement. Decal indicates which direction fence will move during rotation. After an adjustment, it’s scale sleeve can be re-calibrated to Zero. Use thumbwheel only when the cam-handle clamp is in the micro-adjust position. T-SLOT A 5/8” wide flat nut or a 1/2” - 14 deg. dovetailed block combined with a CENTER FINDER (RABBIT) handle or thumb- screw can be The Rabbit and TRU-Center Scale are used to find the inserted into this exact center of a board. Follow directions on page 11 ANTI-PARALLAX CURSOR slot to make a to achieve joint symmetry using any of the Jointech Visually align both top and bottom convenient carriage templates. Once the TRU-Center Scale is calibrated to hairlines to scale or template to handle and/or stop. eliminate parallax. a given cutter or blade kerf, only the Rabbit is used to find center regardless of board width. CLINCHER Templates and Scales The CLINCHER Template Collection includes 48 joint-making templates, The fit of a template or scale in a CLINCHER slot may become too loose 9 dual scales for making repetitive cuts, infeed and outfeed fence scales and over time. If this occurs, make a mild kink in one or more places along its a blank inch scale for custom use. They are made from a special, high- length to add tension when replaced in slot. You cannot damage a template strength vinyl and will give many years of satisfactory use. The two printed or scale in doing this. sheets comprising the 60 templates and scales are partially die cut and need to be separated for insertion into the pockets provided for in this handbook. If your templates become dirty, simply wipe them with a damp cloth. DO Although they should separate easily by peeling apart, because of tolerances NOT attempt to clean the templates with alcohol or any other solvent as this in materials and manufacturing processes it may also be necessary to use a may damage the printing. sharp knife or razor blade. HOME USE WARRANTY (A FULL FIVE YEAR WARRANTY) JOINTECH warrants this product for five years from date of purchase against any defects that are due to faulty material or workmanship. Please return the complete unit, transportation prepaid (proof of pur- chase may be required) for free replacement or repair at our option. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact Jointech, Incorporated. 2 Fence Featherboard Fence Panel Raiser SmartFence Profile Inserts Combination Featherboard and Stock Pusher locks into dovetail on all Jointech fences. Holds workpiece firmly Panel Raiser makes vertical panel raising safer and down against table surface for consistent cuts. easier. It adapts quickly to SmartFence to support 6-pack of blank inserts for SmartFence. Packaged in a Prevents kickback and keeps fingers safely
Load more

Recommended publications
  • 8-Inch Jointer-Planer Model JJP-8BT
    Operating Instructions and Parts Manual 8-inch Jointer-Planer Model JJP-8BT JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-707400 Ph.: 800-274-6848 Revision B 08/2014 www.jettools.com Copyright © 2014 JET 1.0 Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product. (See chart below) • Accessories carry a limited warranty of one year from the date of receipt. • Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is Covered This warranty covers only the initial purchaser of the product from the date of delivery. What is Covered This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials may void the warranty. The exceptions are acrylics and other natural items that are made specifically for wood turning.
    [Show full text]
  • Exercises in Wood-Working, with a Short Treatise on Wood;
    '^^ %."^o* ^r c. .^^~:, "<^^ '^' V ..^"^ .o"^ cO.".-* V^o " A.'^'' ..^'r- v^^ v^' y ,t'», < '-^0^ /. CV « o,. *r;.' aO ^. 'bV" X-O-T- i'^'V. .<•*' • 'VJ"""^^ ' o „ » <vf^ > V »*•»' ^ aO s' EXERCISES IN WOOD-WORKII^G WITH A SHORT TREATISE ON WOOD WRITTEN FOR MANUAL TRAINING GLASSES IN SCHOOLS AND COLLEGES BY IVIN SICKELS, M. S., M. D. ^ NEW YOKE D. APPLETON AND COMPANY 1890 K Copyright, 1889, By D. APPLETON AND COMPAlSfY. i-'3}P') PREFACE. The exercises in wood-working in this book were pre- pared by me during the summer of 1883, for the students of the College of the City of New York. Subsequent teaching suggested many changes and additions, until the manuscript was scarcely presentable. This manuscript has been copied for other schools ; and now, in order that those who have recently asked for it may receive it in better shape, this little volume is printed. I am indebted to Mr. Bashford Dean for the part relat- ing to injurious insects, which was written expressly for this book. I. S. New York, September, 1889. CONTENTS PAGE Introduction = , 7 Part First.—Wood. Structure of wood 13 Composition of wood 18 Branching of stems 19 Age of trees .20 Decay of trees 20 Season for cutting 21 Milling 31 Drying of wood 22 Warping 23 Properties of wood 24 Defects in wood 28 Measure and value of wood 29 Kinds of wood 30 Table of chief qualities of wood 38 Wood and iron 38 Wood-working trades 39 Parasitic plants . .41 Timber-borers 45 Preservation of wood 52 Part Second.—Exercises.
    [Show full text]
  • Build a Plane That Cuts Smooth and Crisp Raised Panels With, Against Or Across the Grain – the Magic Is in the Spring and Skew
    Fixed-width PanelBY WILLARD Raiser ANDERSON Build a plane that cuts smooth and crisp raised panels with, against or across the grain – the magic is in the spring and skew. anel-raising planes are used Mass., from 1790 to 1823 (Smith may to shape the raised panels in have apprenticed with Joseph Fuller doors, paneling and lids. The who was one of the most prolific of the profile has a fillet that defines early planemakers), and another similar Pthe field of the panel, a sloped bevel example that has no maker’s mark. to act as a frame for the field and a flat Both are single-iron planes with tongue that fits into the groove of the almost identical dimensions, profiles door or lid frame. and handles. They differ only in the I’ve studied panel-raising planes spring angles (the tilt of the plane off made circa the late 18th and early 19th vertical) and skew of the iron (which centuries, including one made by Aaron creates a slicing cut across the grain to Smith, who was active in Rehoboth, reduce tear-out). The bed angle of the Smith plane is 46º, and the iron is skewed at 32º. Combined, these improve the quality of cut without changing the tool’s cutting angle – which is what happens if you skew Gauges & guides. It’s best to make each of these gauges before you start your plane build. In the long run, they save you time and keep you on track. Shaping tools. The tools required to build this plane are few, but a couple of them – the firmer chisel and floats – are modified to fit this design.
    [Show full text]
  • In 2017, the Château of Chambord Is Replanting Its 18Th-Century French Formal Gardens
    TABLE OF CONTENTS INTRODUCTION ................................................................................................................................ 3 I - HISTORY .......................................................................................................................................... 4 1 - The Château’s Surroundings in the 16th Century ........................................................................ 4 2 - The Major Projects of the 17th Century ........................................................................................ 4 3 - Completion of the Parterre in the 18th Century ........................................................................... 5 4 - The Steady Disappearance of the Garden .................................................................................. 7 II – SCIENTIFIC APPROACH ........................................................................................................... 8 1 - A Methodical and Scientific Investigation .................................................................................. 8 2 - Historical Research (2003–2014) .................................................................................................. 8 3 - Archaeological and Geophysical Surface Surveys (2013–2014) .................................................. 8 4 - Planned Archaeological Digs (2016) ............................................................................................ 9 III – COMPOSITION OF FRENCH FORMAL GARDENS ........................................................
    [Show full text]
  • Chippendale Mirror
    uring the late 18th century, elaborately framed mirrors, known as looking glasses, served as testimonials to the Dwealth of their owners. A looking glass similar to the one shown here would have cost the owner 10 to 12 shillings, a hefty price considering that the average wage for a skilled tradesman of the time was about 6 shillings a day. This is the first serious piece I give my students to make. Be- cause I’m blending a traditional piece into a modern curricu- lum, I don’t go nuts over historical precedence and technique, and I take full advantage of modern machinery. For a small project, this mirror introduces a wide range of skills from basic design and layout to veneering and scrollwork. Each year, my class ends up with a great collection of stunning mir- rors that they present as thank-you gifts to mom and dad for the thousands doled out for tuition. Begin by constructing a two-layer frame Despite its elaborate appearance, this project has only two main parts. The frame, which I make first, consists of a visible mitered molding in mahogany that sits on top of a poplar subframe; sur- rounding it are scrollsawn parts made from a shopmade core with figured veneer (in this case makore) as the face veneer and plain veneer on the back. The common way to build a frame is to use 3⁄4-in.-thick primary Build a wood and miter the corners. Even when the joints are splined or Chippendale Mirror nailed, this is a poor approach.
    [Show full text]
  • Wood Identification and Chemistry' Covers the Physicalproperties and Structural Features of Hardwoods and Softwoods
    11 DOCUMENT RESUME ED 031 555 VT 007 853 Woodworking Technology. San Diego State Coll., Calif. Dept. of Industrial Arts. Spons Agency-Office of Education (DHEA Washington, D.C. Pub Date Aug 68 Note-252p.; Materials developed at NDEA Inst. for Advanced Studyin Industrial Arts (San Diego, June 24 -Au9ust 2, 1968). EDRS Price MF -$1.00 He -$13.20 Descriptors-Curriculum Development, *Industrial Arts, Instructional Materials, Learning Activities, Lesson Plans, Lumber Industry, Resource Materials, *Resource Units, Summer Institutes, Teaching Codes, *Units of Study (Sublect Fields), *Woodworking Identifiers-*National Defense Education Act TitleXIInstitute, NDEA TitleXIInstitute, Woodworking Technology SIX teaching units which were developed by the 24 institute participantsare given. "Wood Identification and Chemistry' covers the physicalproperties and structural features of hardwoods and softwoods. "Seasoning" explainsair drying, kiln drying, and seven special lumber seasoning processes. "Researchon Laminates" describes the bending of solid wood and wood laminates, beam lamination, lamination adhesives,. andplasticlaminates."Particleboard:ATeachingUnitexplains particleboard manufacturing and the several classes of particleboard and theiruses. "Lumber Merchandising" outhnes lumber grades andsome wood byproducts. "A Teaching Unitin Physical Testing of Joints, Finishes, Adhesives, and Fasterners" describes tests of four common edge pints, finishes, wood adhesives, and wood screws Each of these units includes a bibhography, glossary, and student exercises (EM) M 55, ...k.",z<ONR; z _: , , . "'zr ss\ ss s:Ts s , s' !, , , , zs "" z' s: - 55 Ts 5. , -5, 5,5 . 5, :5,5, s s``s ss ' ,,, 4 ;.< ,s ssA 11111.116; \ ss s, : , \s, s's \ , , 's's \ sz z, ;.:4 1;y: SS lza'itVs."4,z ...':',\\Z'z.,'I,,\ "t"-...,,, `,.
    [Show full text]
  • Motif Collection ‐ Panels
    Motif Collection ‐ Panels • Exceptionally Easy Motif Collection Affordable To Install Imagine a room that emanates charm, The Motif Collection is affordable elegance. Each • Beautiful Ornate sophistication and grace – a room where each panel motif has been painstakingly designed to panel provides a classic statement about your capture an era, a style, a whim. Patterns décor, your personality, your home. • Accepts Paint Or Manufactured by skilled crafts people whose Stain Equally Well commitment to quality products is unsurpassed, our Motif Collection wall panels offer a multitude of stylish patterns etched into the finest quality • Convenient Panel materials allowing you to take a bland room and Sizes (32” x 48”) create a masterpiece brimming with ambiance. • Durable HDF Substrate Wall Panels: Customize your Room! Alexandria Moulding is very pleased to offer the opportunity to customize your panels to reflect your fantasies and whims. If you can imagine it we can create it. Think of it: Your own unique images Raised Colonial Brickwork etched into our panels! Grandchildren, your favourite car, couples, beverage and food themes, Options galore! etc. Just provide us with a photograph or reasonable facsimile of the image you desire and Voila! We will create it for you. The Motif Collection panels can be finished with Heritage Romanesque paints, stains, and clear coats varnishes. We have conducted numerous product tests to assure that our panels give you the best finishing characteristics available.* Use our panels in residential or commercial Colonial Custom applications. Beautify living rooms, offices, bedrooms, playrooms, and even ceilings! Quality & Durability The panels themselves are manufactured to exacting standards with extreme durability.
    [Show full text]
  • Learning Guides 1009
    Schuylkill Technology Center- South Campus 15 Maple Avenue Marlin, Pennsylvania 17951 (570) 544-4748 Mr. Kintzel Carpentry Instructor DUTY TITLE: 1000 Exterior Finish & 1100 Interior Finish COURSE TITLE: Carpentry COURSE CIP CODE: 46.0201 POS TASKS: 1009 Properly measure, layout and install an exterior set of stairs 1110 Properly measure, layout and install an interior set of stairs Mr. Kintzel – Carpentry Instructor STC South Campus 1 PUPOSE: Carpenters need to be able to layout stairs for any situation where they are needed. The layout of stairs do not change whether they are exterior or interior, however their level of finish does. NOCTI: Mr. Kintzel – Carpentry Instructor STC South Campus 2 Mr. Kintzel – Carpentry Instructor STC South Campus 3 PENNSYLVANIA CORE STANDARDS: Pennsylvania Core Standards for Writing for Technical Subjects Standard 3.6 Pennsylvania Core Standards for Reading for Technical Subjects Standard 3.5 Pennsylvania Core Standards for Mathematics Standard 2.1 CC.2.1.HS.F.2 Apply properties of rational and irrational numbers to solve real world or mathematical problems. CC.2.1.HS.F.4 Use units as a way to understand problems and to guide the solution of multi-step problems. CC.2.1.HS.F.5 Choose a level of accuracy appropriate to limitations on measurement when reporting quantities. CC.2.1.HS.F.6 Extend the knowledge of arithmetic operations and apply to complex numbers. Mr. Kintzel – Carpentry Instructor STC South Campus 4 REVISION: 8/2015 CERTIFICATION: NAHB HBI CERTIFICATION DIRECTIONS and PROCEDURES: 1. Read the complete module 2. Complete the following procedure steps 3.
    [Show full text]
  • Patching Old Floorboards
    Patching Old Floorboards SPAB Technical Advice Note Philip Hughes BSc, MRICS (Chartered Building Surveyor) and SPAB Scholar The Society for the Protection of Ancient Buildings 37 Spital Square London E1 6DY 020 7377 1644 [email protected] www.spab.org.uk Contents An old floor of wide boards – scrubbed or polished for generations and uneven from wear – adds considerable richness to any room in an old building. A floor is one of the principal surfaces of a room, yet ancient boards are often badly abused. Bodged attempts to replace boards are common. Even when replacement is completed satisfactorily, the result will not always be visually acceptable. In addition, replacement of floors in their entirety often takes place unnecessarily. This Technical Advice Note aims to alleviate the problem by suggesting a number of methods by which old boards may be patched or repaired. 1 Introduction ....................... 3 2 Deterioration ....................... 3 3 Lifting floorboards ....................... 3 4 Undulations and gaps ....................... 5 5 Reducing unevenness ....................... 6 6 Repairing a split board ....................... 6 7 Repairing a broken edge ....................... 7 8 Strengthening a weak board ....................... 8 9 Splicing a broken end ....................... 8 10 Relaying old boards ....................... 8 11 Surface treatment ....................... 9 12 Conclusion ....................... 9 13 References ....................... 9 14 Other advice ....................... 9 Cover image: Warmth and richness of a well-repaired old floor. Photo: Philip Hughes 2 SPAB Patching Old Floorboards 1 Introduction 3 Lifting This Technical Advice Note explains common reasons why floorboards deteriorate (section 2) floorboards and a range of methods by which they can be repaired (sections 4 to 9). It also discusses It is extremely easy to cause serious damage techniques for successfully lifting floorboards, to floorboards by attempting to lift them – where it is necessary to take them up, and offers particularly when the board is decayed.
    [Show full text]
  • Operation Manual (Parts List)
    OPERATION MANUAL (PARTS LIST) MODEL: WJ-916 Hand Jointer TRUPRO International Ltd. 456 Chung Cheng Road, Feng Yuan, Taichung, Taiwan, ROC Tel: 886-4-25277457(Rep) FAX: 886-4-25208948 Email: [email protected] Web: www.trupro.com.tw TABLE OF CONTENTS Table of contents ………………………………..….…………………..1 Preface…………………………………………….…….………………2 General safety rules……………………………………………………3 Additional safety rules for Automatic Planer…….…………………4 Specifications…………………..……………………………………….5 Unpacking …………………………………………….……………..…5 Machine legend…………………………………………………………6 Installation………………….…………………….……………………..6 Power wire connections………………………………………………..6 Dust collection system……………………….………………………..7 Inspection before operation………………………………….…….….7 Machine adjustments Straight knife adjustment/installation……………………………….8 Spiral cutterhead insert installation………………………………..9 Outfeed table ……………………………………………………………9 Infeed table…………………………………….…………………...10 Fence adjustment……………………………………………………….10 Operations Test run …………………………………………………………..10 Stock inspection……………………………………………………10 Surface planning…………………………………………………………11 Edge jointing ………………………………………………….12 Beveling jointer………………………………………………..13 Lubrication……………………………………………………………..14 Diagrams and parts list…………………………………………………………....15-18 1 PREFACE Thank you for choosing this Jointer. We are pleased to offer you our best machinery and service, and trust that you will find our machinery economical, productive and easy to operate. This manual covers the proper operation, safety and maintenance of the machine. It is important that
    [Show full text]
  • Idaho's Monarch Butterfly Connection by Beth Waterbury, Wildlife Biologist, Idaho Department of Fish and Game, Salmon Region
    Vol. 39 No. 1 March 2017 Newsletter of the Idaho Native Plant Society Promoting Interest in Idaho’s Native Flora Idaho's Monarch Butterfly Connection By Beth Waterbury, Wildlife Biologist, Idaho Department of Fish and Game, Salmon Region Few species spark people's wonder and pas- little was known about milkweed and breeding sion like the monarch butterfly. With its fiery- monarch distribution in the West. This was cer- orange and black pattern and large wingspan, the tainly the case for Idaho, where as recently as monarch is among the most recognized insects in 2014, only a handful of monarch and milkweed North America. Its life cycle is a complex marvel records existed for the entire state. involving a lengthy migration completed relay- style by several generations in a single year. Dur- Federal grant helps to leverage monarch ing their summer wanderings, female monarchs work in Idaho and Washington lay their eggs on the leaves of milkweeds—the sole Through a grant from the U.S. Fish and Wild- food source for their striking yellow, white, and life Service, Idaho Department of Fish and Game black-striped caterpillars. Milkweeds are the es- (IDFG), Washington Department of Fish and sential links of the chain that connect monarch Wildlife (WDFW), and the Xerces Society for In- breeding populations across North America. vertebrate Conservation partnered on a multi- Monarch butterflies have made their mark on faceted project to address monarch and milkweed Idaho as the official state insect. Idaho is one of 11 data gaps in Idaho and Washington. Starting in western states that contribute to the western mon- 2016, partners worked to compile monarch and arch population.
    [Show full text]
  • Making Window Sashes
    Project PHOTOGRAPHS BY MICHAEL T COLLINS Making window sashes FILLET Michael T Collins enjoys a window SCRIBED OVOLO CROSS OVOLO GLAZING SECTION of opportunity as he makes light of TENON REBATE sash window construction RAIL WEDGE PEG f all the tasks of the joiner, perhaps no other has exacted the STILE Omost skill and afforded the most income than that of the window sash maker. If you have never attempted to make a sash, I highly recommend it, if for no other reason than to test your layout, STILE precision and organisational skills. MUNTIN BAR / In this article I’ll show you how to make GLAZING BAR a small, simple four light sash. Parts of a window sash MORTICE & Diagram 1 shows the basic parts of a TENON window sash. General terms are: muntin bars, glazing bars (UK), muntin (US). ➤ WEDGE PEG RAIL STUB TENON Woodworking Crafts issue 49 37 Project Project produced on the sample, in my case A brief history of the sash the fillet is 9mm. The distance from the There are various planes that can be mortise gauge fence to the nearest pin used to make window sashes. The most should be the total width of the ovolo common are the English sash moulding profile determined from the sample. planes. Plane (b) shows a common This way the intersecting mortise and profile available at the end of the tenon will fall exactly where the fillet is 19th century. between the ovolo and glazing rebate. English methods required at least Now, from the face side, mark the two planes to produce the profile.
    [Show full text]