Operating instructions.
■ Aventos 3781 ZW ■ Aventos 3981 ZW TV. ■ Mimo 32 ■ Vitros 6381 ZW ■ Xelos 5381 ZW
233–29804.025
1 Contents
Remote control – TV functions 3 Daily handling 10 What to do if … 21 – 22 Switching on/off 10 Control panels 4 – 5 Changing channels 10 Technical data 23 General menu operation 11 Mechanical data Rear connections 5 Adjusting the sound 11 Electrical data Adjusting the picture 11 Welcome 6 Operation on the set 11 Accessories available 24 Thank you TV equipment Modes of operation 12 – 17 Service addresses 25 Setup TV mode 12 Cleaning Picture in picture 13 EPG mode 14 –15 For your own safety 7 – 8 Teletext mode 16 Video mode 17 Initial installation 9 Batteries – remote control Operating additional equipment 18 – 20 Connection Logging in and connecting Switching on AV equipment 18 Initial installation Video playback 19 Loewe video recorders and direct operation of Loewe DVD players 20
2 Remote control – TV functions
Radio mode on/off Indicator: Operate VCR VTR Control 150 Indicator: operate DVD DVD Picture menu Direct operation Switch on/off select for VCR/DVD/TV – in standby mode ✳ SV LP 000 PIP operation on/off V= Sound off/on (Mute) Video operation with EPG operation on/off video operating line on/off 1 2 3
4 5 6 Select programme directly /in the menu: numeric input 7 8 9
0 Call up menu Blend in programme, time, title of the broadcast /in the menu: back /in the menu: blend out menu M E Teletext mode on/off T i Call up main information /in the menu: switch info texts on/off Select programme up/down Call programme overview /in the menu: select up/down /in the menu: confirm OK Set volume – / + /in the menu: select or adjust left/right
Personal teletext pages Programme info on/off on/off
Set picture format Last programme
You can assign other functions to these keys for TV operation. Assign these functions in the TV menu under – Settings – Function Keys.
✳ only in sets with Picture In Picture function
3 3 Control panels Connections on the right side of the TV set Aventos Audio input (white=left, – + red= right)
Video input AVS (CVBS)
Channel up/down On/Off key Standby indicator /in a menu: adjust Video input AVS (Y/C, CVBS) Operating indicator To display menu
Headphones socket
Connections on the right side of the TV set Mimo To display menu
Channel up/down /in a menu: adjust – + On/Off key Video input AVS Audio input Operating indicator (Y/C, CVBS) (white=left, red= right) Standby indicator Headphones socket Video input AVS (CVBS)
Connections on the right of the TV base Vitros On/Off key
To display menu M Channel up/down – + /in a menu: adjust Video input AVS Audio input (Y/C, CVBS) (white=left, Operating indicator Standby indicator red= right) Headphones socket Video input AVS (CVBS)
4 Connections on the right of the TV base
Xelos — +
Video input AVS Audio input Channel up/down (Y/C, CVBS) (white=left, On/Off key Standby indicator /in a menu: adjust red= right) Operating indicator To display menu Headphones socket Video input AVS (CVBS)
Rear connections
✳ VGA-input Service Sockets for video and output for socket/ recorder, DVD, remote control signal Connection decoder etc. (RC5/RC6) Loewe audio systems (Euro-AV)
✳ DIG IN Antenna socket 2nd satellite tuner RC5/RC6 1 Digital tone inputs ✳ SAT ✳ Connection for IR link SERVICE Dolby digital module IR 2 ✳ Digital tone output Antenna socket 1st satellite tuner ✳ Dolby digital module SAT A/D VGA DIG OUT AUDIO IN External audio input AV1 AV2/RGB AV3 R Audio output sockets Antenna socket for antenna or cable system. AUDIO OUT Connection for active If no PIP tuner is fitted, insert antenna plug VHF/UHF L center speaker of your antenna or cable installation here. SUR ✳ ✳ Dolby digital module If a PIP tuner is fitted, insert antenna plug Connection for active from PIP tuner (splitter) here. C R surround speakers ✳ ✳ SUBWOOFER Dolby digital module Antenna socket for picture-in-picture (PIP). STAND SUB L Insert antenna plug of your antenna or cable installation here.
Connection for subwoofer in the stand, Connection for Loewe active loudspeaker systems special subwoofer ✳ or Home Automation Dolby digital module ✳ depending on equipment and type of set or retrofittable 5 Welcome
Thank you, TV equipment Cleaning for choosing a Loewe product. This operating manual describes the maximum Clean the TV set only with a damp, soft, clean We are very happy to have you as a cus- equipment. cloth (never use aggressive or abrasive cleaning tomer. Functions marked by ✳ are not available in agents). all TV sets. Loewe combines high quality in technology, The illustrated menu contents may vary de- Disposal design and user friendliness. This applies pending on the TV equipment. equally for TV, video and accessories. You can find out what equipment your TV Packaging and boxes Neither the technology nor the design are an has in the main information – ”Technical You have chosen a very high-quality, long- end in themselves but serve to give our cus- spec. of TV set”. lasting piece of technical equipment. In compli- tomers pure watching and listening enjoy- ance with national regulations, we have paid a ment. Setup fee to authorized disposal companies who will We have not allowed ourselves to be led collect the packing from the dealers. Neverthe- astray by short-lived fashion trends in the Handholds are provided on the front right and less we recommend that you keep the original design. You have, after all, purchased a high- left sides of the Vitros und Mimo TV sets. Use box and packing material so that the TV set has quality piece of equipment which you don’t these handholds to carry the TV set. Do not optimum protection if you have to transport it. want to get tired of looking at tomorrow or carry the Vitros set by the base, as the decora- the day after. tive grid could be damaged. The set Please consult your dealer for environmentally About the set Please note that the feet of the TV set could friendly disposal of the TV set. We have designed the TV set in such a leave marks on soft wood furniture (e.g. deal, way that it is easy to operate with pine, fir etc.) due to the weight and moving the menus. If you need information about set about. how to operate it, just display the info The plastic material of the feet contains texts with the i button, you will soon softeners which could in some cases etch the get a grasp of the relationships. surfaces of furniture. In such cases you should place a firm under- You will find the answers to many tech- lay about the same size as the base of the TV nical questions in the index of your TV set underneath it. set. If it’s a matter of operating the TV, you can access a function directly from Please also read and observe the safety in- the index. This saves you from having to structions on the following pages. read through detailed operating instruc- tions and is the reason why this operat- Make sure no bright light or sunlight falls on ing manual you are reading only explains the screen and impairs the picture by reflec- the most important operating steps. tions.
With the remote control, you can operate three Loewe units, this TV, a Loewe video recorder and a Loewe DVD player.
6 For your own safety
For your own safety and in order to avoid • Like every piece of electronic equipment, • Avoid dropping metal objects, needles, unnecessarily damaging your TV set, please your TV needs air for cooling. Obstructing paper clips, liquids, wax or similar into the read and observe the following safety the air supply to the set can cause fires. The air vents at the back of the set. This causes instructions: air vents on the back of the TV set must short circuiting of the set and could start a always be kept free. Do not leave fire. If anything should get inside the set, • This TV set is designed exclusively for newspapers or cloths lying on the TV set. switch it off immediately, pull out the plug receiving and reproducing audio and visual The air supply is also impaired when the TV and call the after-sales service to check it. (AV) signals. set is placed on a blanket or a thick pile carpet. • It is designed for the home or office and If the TV set is placed in a cabinet or on a may not be used in rooms with high humidity (e.g. bathroom, sauna) or a high concentration of dust (e.g. workshops). If the unit is used in the open air ensure 10 cm that it is protected against moisture (rain, dripping or splashing water, or dew). Do not place containers filled with water, such as vases, on the TV set. High moisture and dust concentrations produce creep currents in the set which can lead to danger of electric 5 cm 5 cm shock or fire. The manufacturer’s warranty is only valid for use of the TV set in the specified permissible environment. shelf, at least 5 cm clearance at the sides and at least 10 cm at the top must be left to • This set may only be connected to a power allow air to circulate. Do not place vases filled with water, lighted supply with the voltage and frequency Stand the TV set in a place where it is not candles etc. on the top of the TV set. specified on the rating plate using the exposed to direct sunlight or additional enclosed power cable. The wrong voltages heating from radiators. can damage the set. • Magnetic fields influence the picture quality • If the set is moved from a cold environment of the TV set. Do not place loudspeakers or to a warm room, condensation forms on all other magnetic sources immediately next to parts of the set. Moisture produces creep the TV set. currents in the set which can cause a fire. In this case, you should leave the set for a reasonable time to acclimatize (when the condensation on the screen has evaporated) before switching it on.
7 For your own safety
• You should never attempt to remove the • Do not place the TV anywhere where it may rear panel of the TV yourself. The set op- be exposed to vibrations. Vibrations can erates with high voltages which could be lead to overloading of materials. fatal. Leave repairs and servicing of your TV set to authorized TV technicians. • Do not leave the TV on unsupervised.
• Due to the picture tube, TV sets have their • Pull out the antenna and mains plugs centre of gravity fairly near to the front. The during a thunderstorm. Surge voltages from TV set therefore has a tendency to tip for- lighting strikes can damage the set both ward relatively easily which could cause through the antenna system and the mains. injury to persons. You should also pull out the antenna and Only stand the TV set on a level, firm base. mains plugs during long periods of ab- The set must stand on all feet. The TV sence. should not overhang particularly when it is placed in a cabinet or on a shelf. • The mains plug of the TV must be easily If the TV is placed on a stand, make sure accessible so that it can be disconnected this is larger than the surface area of the from the mains quickly at any time. base of the TV. We recommend you to use only original • Lay the power cable so that it cannot be When using turntables and drawer shelves, parts, e.g. Loewe racks and stands. damaged. The power cable may not be make sure they have a sufficient load ca- kinked or laid over sharp edges, and may pacity. If the TV set is placed on a console with not be walked over or exposed to chemi- castors, move the console carefully because cals; the latter applies for the entire TV the console and the TV could tip over. set. A power cable with defective insu- Consoles with castors may considerably lation can lead to electric shocks and reduce the stability of the sets placed on is a fire risk. them, so only use consoles specially designed and approved for the TV. • When you pull out the mains plug, do not Never allow children to handle the TV set tug the cable but hold the housing of the unsupervised. plug. The cables in the mains plug could be damaged and cause a short circuit the Do not allow children to play close to the next time it is plugged in. TV set, they could knock, push or pull it from the stand and injure someone.
8 Initial installation
Batteries – remote control Connection Initial installation To insert or change the batteries, press the Mains Automatic programming of the TV set is started point marked by an embossed arrow. Push Connect the TV set to a 230V/50–60 Hertz the first time you switch it on. Follow the the cover of the battery compartment down outlet. menus. and remove it. Insert the batteries of the alka- First you have to select the menu language for line manganese type LR 03 (AAA) with the Antennae your set. Then you specify which antenna you correct polarity (+/–). Remove the rear cover from the Mimo set by have connected to your TV and in what country pulling backwards. Clamp the cable in the cable you are using it. Then you start the station holder and lead it downwards through the search. The TV set searches for, stores and sorts opening. all the stations which your antenna system + Connect your antenna or cable system to the receives. You then see a list of the stored VHF/UHF antenna socket. stations in which you can mark your favorites. If your TV is equipped with a picture-in-picture Finally log in your video recorders, decoders, tuner (PIP), plug the antenna plug protruding Loewe audio system and Home Automation from above the PIP antenna socket into the with the connection wizard and connect these + antenna socket for the VHF/UHF tuner. Plug the to the TV set according to the illustrated antenna plug of your antenna or cable system connection plan. into the socket of the PIP tuner. If your TV set is equipped with one or two Select the settings with the Then push the cover back on. satellite tuners, connect the SAT antennae to arrows on the ring ... the SAT sockets (see figure on page 5). Note on disposal of batteries: Refit the cover to the Mimo set. The original batteries do not ... confirm the settings with
DIG IN
RC5/RC6 1 SAT contain any pollutants such as SERVICE IR OK. You then move on to the 2 OK CTRL
SAT A/D VGA DIG OUT cadmium, lead and mercury. AUDIO IN AV1 AV2/RGB AV3 next menu ... R AUDIO OUT VHF/UHF L Used batteries do not belong in SUR C R SUBWOOFER STAND SUB L the domestic waste. They must i ... press this button if you want be taken to the appropriate information about the settings. collection points according to the national laws. Ask your dealer. You can repeat initial installation at any time, e.g. after moving house. Launch the index in the main information (i button). Then select the item ”Repeat initial installation”. Then start Switching on ”Initial installation” with OK.
Press the On/Off button so that it snaps in.
9 Daily handling
Switching on/off Changing channels About the channel table Your TV set is equipped with an eco-standby Channels up/down (only favorite OK Launch the channel table with power supply unit. The power consumption drops stations if these are shown in the OK to low power in standby mode. If you want to station table). Channel overview: TV Numerical AVS 6 S–RTL save even more energy, switch the set off with AV3 7 N–TV With the numeric keys on the remote control AV2 8 DSF AV1 9 TM3 the On/Off switch. However, please note that 0 VIDEO 10 PRO7 The set has a dynamic memory with 220/with DVB 1 ARD 11 RTL 2 2 ZDF 12 WDR 3 EPG data are then lost and timer recordings 3 SAT.1 13 BR 3 1470 memory slots. If up to 9 channels are stored, 4 RTL 14 HR programmed on the TV set will not be carried you only need to enter one number, up to 99 two 5 VOX 15 MDR 3 out. 0 ... 9 Select program: numbers, up to 999 three numbers and above 999 Select and Change programs i Info Menu If the TV is switched on, you can OK press OK to proceed Favourite programs M four numbers (please look in the channel table to Change sorting E End switch it off with the blue On/Off find out how many channels have been stored). button on the remote control. 1-digit channels mark the channel The red standby LED on the set Keep the button 0 – 9 pressed for (the marked channel is shown lights up. If the green (blue) LED one second, the channel then in the PIP picture ✳) also lights, a timer recording is changes immediately. or in progress, EPG data is being or press the button 0 – 9 briefly, 0 9 Mark with numeric keys acquired or radio mode without 7 the channel then changes after 2 ... screen display is active. seconds (immediately when up to 9 long OK Launch the marked channel From standby it is best to switch channels are stored). back on with the blue On/Off 2-digit channels Sort alphabetically/numerically button or with a numeric key Keep the second numeric key 2 7 (blue button) (channel 0-9). The green (blue) pressed for one second, the chan- short long Channel overview: TV Alphabetical operating LED then lights up. nel then changes immediately. ARD HOT HR or press both numeric keys briefly, BR-ALPHA When you switch on the TV with BR3 KIKA OK OK, you see the channel table the channel then changes after 2 CNN INT. MDR 3 DSF N–TV and can choose a channel. seconds (immediately when up to EUROSPRT N24 N3 99 channels are stored). ✳ Switch on in the radio mode. ABCDEFGHIJKLMNOPQRSTUVWXYZ 3-digit channels Select and Change programs i Info OK press OK to proceed Favourite programs M Menu 1 2 7 Keep the third numeric key pressed Change sorting E End for one second, the channel then None of the indicators lights up short short long changes immediately. Display favourite channels only when you switch off the TV set or press the three numeric keys (yellow button) with the On/Off button on the briefly, the channel then changes set. after 2 seconds (immediately when Launch Audio/Video programs up to 999 channels are stored). – AV selection Switch on the TV set with the On/ 4-digit channels Off button on the set when it is for playing AV equipment (see Press the four numeric keys switched off. 1 2 7 8 0 also page 19). briefly, the channel then changes all short immediately. AV Selection VIDEO AV1 AV2 AV3 AVS Depending on how many channels have been stored, you can place one or more zeros in front Select AV socket or VIDEO for of the number and select for example channel 7 VCR transmitter. = 07 or 007 or 0007.
10 Daily handling
General menu operation Adjusting the sound Adjusting the picture With the TV and picture menus, we show you how Adjusting the volume Call the Picture menu to navigate within the menus. Which buttons you M Call the TV menu TV menu can use for operation is shown at the bottom of Adjust the volume Standard settings the appropriate menu. Picture Mark ”Picture” Volume 36 Sound Call the TV menu M zap2text Mute Connections TV menu Settings Call picture Standard settings Mark Sound off; OK functions Picture (white field) Sound on: press button again or Sound Select picture settings zap2text adjust volume Connections Call the menu Mark picture Settings OK Sound off Sound on Picture with OK Contrast function Other sound settings: Picture adjustment or Colour 32 i Info M Call TV menu OK M Back > Brightness E End Sharpness Tint Set/ TV menu other ... select Grey menu items cannot be Standard settings Mark ”Sound” Picture selected Picture Contrast Sound Picture settings: contrast, picture adjustment, Picture adjustment Set zap2text Call sound Colour 32 Connections colour, brightness, focus, colour tone, picture (setting value OK Brightness Settings functions format, noise reduction (DNC), movement Sharpness and bar) Tint compensation (DMI), automatic picture size other ... Mark sound adaptation (AMD) and rotate picture in large function Sound picture tubes. i Info Mark other Sound via OK M Back menu items Listening mode Stereo Panorama Dolby Virtual E End Sound adjust Operation on the TV set Headphone volume Loudspeaker sound Set/ Headphone sound Changing channels on the TV set Picture select other ... + other ... Select Picture format Channel up DNC off on (frame) Sound settings: Sound via the loudspeakers of the DMI – AMD TV set or another system. Listening mode Stereo/ Channel down Panorama/Dolby Virtual✳. Sound select (language) for loudspeaker, headphones and sound outputs. Volume, contrast and color i Info Volume of the headphones, automatic volume, Press the function OK Show/hide M Back i max. volume, treble, bass and balance. button until the E End info texts Direct control on TV desired function Picture i DNC (Digital Noise Control) Set teletext volume Volume 16 is marked With DNC you can eliminate or reduce picture other ... Contrast interference, e.g. due to poor reception. Picture format Sound off Colour + DNC Station –/+ More volume, DMI Service AMD contrast or color M Back to the previous menu level Set volume – Mark Less volume, – + Change Volume 36 contrast or color E Hide all menus Sound 11 Modes of operation
TV mode The explanation of the remote control shows Some settings in the TV menu: the function of every button in different modes Child lock In initial installation and daily operation, the TV of operation of the TV set and the remote con- Use the child lock if you want to prevent your set is in TV mode. This is also the case when none trol. children watching after a certain time, once or of the other modes of operation such as EPG, The index answers many questions regarding all daily, all or certain programs. Teletext, PIP, Video or Radio is selected. aspects of the TV. If it is a question about the On-screen displays Every one of these modes of operation has a operation, you have direct access to the operat- You can define duration and position of the menu which you can call with the M-button and ing function from the index. displays, the content of the program and status with some color button assignments. Loewe TV sets are supplied in different models display and activate or deactivate zap2text as a display. Function of the color buttons in TV mode with different equipment. You can find out what You can assign the functions of the four color equipment your TV has under the menu item Timer functions ”Technical spec. of the TV set”. You can have your TV switch on and off at spe- buttons yourself. The following functions are set When you have made all the settings and cific times or have yourself reminded by a signal at the factory: red: list or call personal teletext connections, you can switch over to ”Simplified tone. control” using ”Select Mode”. Then the pages Time and date ”Settings” and ”Connections” can no longer be When you receive teletext, the TV records the green: call picture format setting launched in all modes of operation menus. right date and time settings. The time serves as Switch ”Simplified control” back off when you information for timer recordings, timer functions want to make settings. yellow: call last viewed station and EPG. If you do not receive teletext you Call the TV menu should set the date and time and not switch the TV off with the mains button as the settings will Launch the TV menu blue: call station info M then be lost. TV menu Language You can assign other functions to the buttons in Standard settings Picture If ”your” menu language is not set, you have to the TV menu ”Settings” – ”Function keys”. Sound select the ”Language” menu in a language you Status display zap2text Connections cannot understand: E Show/hide status Settings Press the M-button (TV menu), mark the last menu item (settings), press the OK button and Clock 20:15 zap2text mark the last menu item (Language) under 1 ARD Stereo Some stations use this service. If teletext pages ”other ...” and press the OK button. Main information are referred to during a program, the TV set Now select the right language and confirm with saves and/or displays this page number. You call Call main information OK. i the teletext page with the T button from the Main information display during the program or from this menu. Autom. channel search Connections Standard values Operating information Explanation of the remote control You can save the setting for picture and sound Index you have made in this menu and launch them Technical spec. of TV set Select control level again later. Connections Select and call up i Info OK with OK M Back You will find information about this in the chap- E End ter ”Logging in and connecting AV equipment” on page 18.
12 Modes of operation
Picture in Picture (PIP) ✳ Station scan Setting ”iPIP” The frame around the PIP Switch on PIP, call the PIP menu with the M Standard PIP functions: picture must be green. If it is button. In standard PIP, a PIP picture is displayed in the not, press the green button. Mark current TV picture. The frame round the PIP Start the station scan with the ”Functionality” picture is initially green in standard PIP. PIP menu blue button. The PIP frame Position Functionality iPIP Standard-PIP Show/hide PIP picture turns blue. The programs now change automatically. PIP picture as still frame Stop the program scan with the blue button. Select ”iPIP” i Info The frame around the PIP picture The PIP frame turns green again. OK M Back must be green. If it is not, press E End the green button. Changing PIP picture/TV picture E Hide menu Press the red button to freeze The frame around the PIP the PIP picture. picture must be green. If it is iPIP function: Press again – moving picture. not, press the green button. In iPIP the TV picture currently displayed becomes Change the pictures with the the PIP picture. Select another program for the TV Changing the station of the PIP picture yellow button. The frame around the PIP picture picture and keep your eye on the PIP picture. In must be green. If not, press the this way you can temporarily ”ban” commercials green button. or parts of programs to the PIP picture. In iPIP, the 2 ZDF Then select the station as frame round the PIP picture is orange. normal. PIP picture on/off
1 ARD The PIP picture becomes a TV picture again when
3 WDR3 Position of the PIP picture you switch off PIP. M Call the PIP menu with the M- button.
Changing the station of the TV picture Select ”Position” The frame around the PIP picture must be white. If it is not, press Select the symbols for the the green button. position Then select the station as normal.
PIP menu Position Functionality
i Info OK M Back E End
2 ZDF E Hide the PIP menu
13 Modes of operation
EPG mode updated accordingly. With the g h buttons, you Launching detailed information mark a channel you want to watch (currently If detailed information about the selected chan- EPG is the electronic channel guide for TV pro- running), memorize or record. nel is available, you will see the T-button dis-
grams. With this system, you can easily find the EPG Fri 03.08./20:08 played additionally. You can launch the detailed Favorite programs all ARD ... programmes that interest you (sorted according 14:03 ARD WunschBox -15:00 information with this button. 20:45 MDR Das deutsche Schlagermagazin 14:03 ARD WunschBox to time, day, topics and channels). You can Other functions in the EPG menu: memorize programmes and programme record- ings. Overview of the memorized programmes
Select and Record i Info You will find the channels you have memorized memorize Time (Sat 4.8./14:03) M Menu A wizard is activated the first time you use EPG OK with OK Topics (Music) E End in a list, also DVB radio stations. (not with DVB) which guides you through the Programs (fav.) Switching on TV when memorizing necessary settings. Then run the data acquisition The frame turns blue when you press the blue You can have the TV switched on automatically (see page 15). button. The blue frame signifies station selec- from standby at the time of the memorized tion. Use the arrow buttons < > to choose channel. If you are not present at this time, a Using EPG between your favourite stations, all stations or safety prompt makes sure the TV switches off Switch EPG on/off the station just set. You can select another indi- > again after 5 minutes. EPG Fri 03.08./20:08 vidual station by moving to “...” with , mark- Fri 03.08. now soon 21:00 22:00 23:00 00:00 01:00 02:00 ... Registering/starting memorized 19:15 VOX Zurück in die Vergangenheit ing a station in the list and storing it with OK. 19:30 ZDF WISO 19:30 BR3 Immer weiter, immer höher und dann? programmes 19:40 SAT1 echt wahr! The respective current settings you last made in 19:40 RTL Gute Zeiten, schlechte Zeiten –20:15 19:50 MDR Mach dich ran If the TV is already on when the memorized 20:00 ARD Tagesschau the colour-framed first line are shown in addition 20:00 HR3 Tagesschau 20:00 NDR Tagesschau channel starts you can have the start of the 20:00 WDR Tagesschau to the operating notes for the green, yellow and Select and Record i Info channel indicated or the TV switched over imme- memorize Day (Fri 3.8./now) T Detai blue buttons. OK with OK Topics (all topics) M Menu Programs (all) E End diately. Direct input of time The first line is framed initially in green. The You can also enter the time directly with the Short info lines green frame stands for time and date, with the numeric keys of the keypad. After entering the Short infos are broadcast for many programmes. green button you switch between time and day first digit, the time is displayed first next to Set how many lines this information should have or, if the frame has a different colour, back to the the symbol of the green button by asterisks or switch the short info lines off. green frame. With the arrow buttons < > you and is then replaced by the entered numbers, EPG entry select: now, later, the time or day for when pro- e.g. 2100. The selection jumps to the next If you want to start EPG operation, you can grammes start. The list of channels below is possible programme. Enter four numbers, e.g. retain your last settings for topic and pro- updated accordingly. With the buttons g h you 2100. gramme selection or start with all topics and all mark a channel you want to watch (now run- If the entered time has already passed, its entry programs. ning), memorize or record. is used for the following day. EPG Fri 03.08./20:08 person. topics all - ... Hobby Sport Child Knowledge Music ... Memorizing or recording a programme 12:00 NDR WunschBox -13:00 14:03 ARD WunschBox 20:45 MDR Das deutsche Schlagermagazin You prepare the programme marked with the 21:00 NDR Bi uns to Hus 01:25 NDR Bi uns to Hus g h 12:00 NDR WunschBox buttons for recording by pressing the red 14:03 ARD WunschBox button. The symbol + is placed in front of the
Select Record i Info title of the programme. The TV switches over and view Day (Sat 3.8./12:00) M Menu OK with OK Topics (music) E End to this channel when it starts. Programs (all) Programming recording for the video The frame turns yellow when you press the yel- recorder low button. The yellow frame stands for topic You prepare the channel marked with the g selection. With the arrow buttons < > you h buttons for recording by pressing the red choose between personal topics, all topics and button. the individual main topics such as Film, News, Show, Music etc. The list of channels below is 14 Modes of operation
EPG settings Select programmes for EPG If, for example, you cannot receive any EPG If you want to change the provider or want to Select the channels here for which information is providers and no DVB is installed in the TV set, have other programs evaluated, you can do this to be collected. you should switch off the data acquisition. Program selection: 3SAT in the EPG menu. 0 VIDEO 9+S–RTL E 18 KIKA Implementing data acquisition 1+ARD E 10+MDR 3 19 PHOENIX E 2+ZDF E 11 DSF 20 EUROSPRT The data must be collected first after these Provider search 3+SAT.1 E 12 TM3 21 KABEL 1 4+RTL E 13+PRO7 E 22 MTV 5 VOX 14+RTL 2 E 23 CNN INT. To 6+S–RTL E 15+WDR 3 E 24 HOT settings or every time the TV is switched off. 7+N–TV 16+BR 3 E 25 TV 5 EPG on/off 8 DSF 17+HR 3 E 26 VIVA do this, select the programme which you Select programs + Mark i Info have defined as a provider and leave it Launch EPG menu OK and mark Mark all M Back M with OK Mark only E End EPG menu switched on for about one hour. Or switch List of memorized stations Channels marked by + are favourite channels. The the set into standby mode. The green (blue) LED Select provider/program Favorite programs provider supplies information for channels lights up in addition to the red LED after about Select personal topics Switch on TV when marked yes marked by E (terrestrial, cable and analog satel- two minutes. Data acquisition takes about one Memorized stations first report other ... lites) and D (digital), these are already marked hour, in sets with a DVB module a little longer. i Info OK M Back (blue letters). The data is automatically collected between 2 E End Mark the station/Remove the and 5 in the morning when the TV is switched Mark ”Provider/Select channel” OK marking off to standby. Defining personal topics red: Only mark favorite stations You will find the programs that interest you OK Launch faster when you define your personal topics. Mark ”Select personal topics” in the EPG menu Select provider green: Mark all stations 3SAT and compile your list of personal topics. PRO7 RTL2 Select personal topics TV 5 Film General music TRT 1 News Jazz yellow: Only mark this station Show Rock/Pop Hobby Classical Sport Folk/Easy listening Select provider Provider search i Info Child Musicals/Opera Knowledge Other OK and confirm Change provider list M Back Music with OK Program selection E End Back to the EPG menu Culture M Select topics mark all i Info Start provider search (green OK and mark with OK Mark only M Back E End button). This may take some Switching data acquisition on/off time. Mark ”Data acquisition” in the Radio mode Mark the provider EPG menu under ”other” You can switch the radio mode on and off with the L button. If at least one satellite tuner OK Save the provider and possibly a DVB module are installed in your Select data acquisition off/on TV set, you will be able to receive radio stations. EPG menu If none of these additional modules is installed, This is followed by a channel search and a list other ... Data acquisition off on you can only select the audio inputs and play of TV channels is displayed which transmit Short info lines none data. Move on to the provider selection with EPG entry last setting back through these with the channel table or g h the OK- button. If the channels offered are the buttons. You can find further informa- i Info tion in the Operating Instructions for satellites what you want, move on to the channel selec- OK M Back tion with the blue button. E End and DVB.
15 Modes of operation
Teletext mode More functions for page selection Displaying teletext pages Teletext transmits information such as News, Mark a specified page number on 0 Stop self-turning pages (HOLD) Weather, Sport, Programme Previews and Subti- the page (Page Catching) tles. werden ...... 223 zoom: top half– bottom half – 1O.3O Ein Zwilling zu viel ...... 314 9 normal size T Teletext on/off 12.OO Tagesschau um zwölf tagesschau. . . . 11O TV Guide. . 3OO/4OO 1OO 1OO ARD-Text O1.O7.O1 1O:3O:42 Wetter...... 17O Kultur...... 5OO Sport. . . . . 2OO/6OO TXT-Quiz...... 555 TV picture on/off (Split text) ARD-Text Teletext im Ersten Lotto/Toto. . . . . 666 Wirtschaft...... 7OO Index...... 1O1 Impressum...... 1O7 1OO 1OO ARD-Text O1.O7.O1 1O:3O:42 Inhalt tagesschau Letzte Meldung: Libyscher Botschafter – + ARD-Text Teletext im Ersten Page selection OK view in London schließt Entschädigung für Letzte Meldung: Libyscher Botschafter in London schließt Entschädigung für Lockerbie-Opfer nicht mehr aus Lockerbie-Opfer nicht mehr aus Fußball: Rolf Hüssmann soll neuer Fußball: Rolf Hüssmann soll neuer Sportdirektor beim VfB Stuttgart Launch werden ...... 223 Sportdirektor beim VfB Stuttgart 1O.3O Ein Zwilling zu viel ...... 314 werden ...... 223 OK 12.OO Tagesschau um zwölf 1O.3O Ein Zwilling zu viel ...... 314 tagesschau. . . . 11O TV Guide. . 3OO/4OO Wetter...... 17O Kultur...... 5OO 12.OO Tagesschau um zwölf Sport. . . . . 2OO/6OO TXT-Quiz...... 555 Lotto/Toto. . . . . 666 Wirtschaft...... 7OO Scrolling in stored sub-pages. In Index...... 1O1 Impressum...... 1O7 tagesschau. . . . 11O TV Guide. . 3OO/4OO – + Inhalt tagesschau Wetter...... 17O Kultur...... 5OO the bottom line you will see Page selection Sport. . . . . 2OO/6OO TXT-Quiz...... 555 Lotto/Toto. . . . . 666 Wirtschaft...... 7OO which sub-pages you can already Index...... 1O1 Impressum...... 1O7 – + Inhalt tagesschau Teletext menu Page selection launch. M Launch teletext menu – + Geld Optionen 2 Many channels use the TOP operating system, 1 2 3 4 5 6 7 8 9 1O Here you will find functions such some use FLOF. Your TV supports both these Menu as ”New message”, ”Reveal” systems. The pages are divided into general i Launch contents page 100 News flash Show hidden information, switch to topics and topics. After switching on the tele- Station –/+ 1OO 1OO ARD-Text O1.O7.O1 1O:3O:42 other channels (if another tuner text, up to 390 pages are stored for fast access. Sub-page ARD-Text Teletext im Ersten Recording is available), enter 4-digit sub- Selecting pages with the coloured buttons TOP table page number directly and pro- The coloured bars (in TOP) or the coloured The TOP table is a general list of teletext. You can Settings gramme video timer recordings
writing (in FLOF) show you which coloured only launch the table on channels which use the i Info via teletext. buttons to use to scroll to general topics and TOP operating system. OK M Bck In the settings you will find E End topics. Launch the TOP menus to define the preview Lotto/Toto. . . . . 666 Wirtschaft...... 7OO OK table pages, subtitle pages and per- Index...... 1O1 Impressum...... 1O7 – + Inhalt tagesschau Page selection sonal teletext pages. Mark a general Set volume red: back to previously viewed topic You can adjust the volume in teletext mode after Table of Pages (TOP) page (not with FLOF) Übersicht Wetter tagesschau Vorhersage pressing the sound off/on button t. Wetter Städte Sport 1 Regional TV Guide Reisen ARD heute int. Städte ARD morgen Biowetter Select the Topics green: forward to next page FS-Sendungen TV Guide 2 Kultur column (not with FLOF) Gesellschaft weitere . . .
Select page and OK press OK M Back yellow: to the next topic (only to view E End in TOP and FLOF) Mark menu items blue: to the next topic (only in TOP and FLOF) OK Display page
1 0 7 Enter the page number directly
16 Modes of operation
Video mode ❚❚ Pause (PAUSE) The Video menu provides you with options for
▼ timer programming by EPG, teletext or manually. Next chapter (only for DVD) You can operate Loewe video recorders and DVD You can also amend or delete timer information. players with the video control bars even if they ▼ Previous chapter (only for DVD) are hidden. The VCR’s must be connected to the In the ”Connections” menu you can log other AV ● Record Euro AV sockets (Scart) and logged in under the equipment on or off and make a ”Digital Link ”Connections” menu. Plus data transfer”. This serves to transfer the Perform selected function. Digital Link must be switched on on the Loewe OK transmitter data of the TV set (not satellite chan- video recorder. Only then can you use the con- nels) to the Digital Link Plus VCR. trol bar. You also need Digital Link for timer When you start a recording, the channel you Digital Link Plus VCRs have the possibility for recordings of satellite programs controlled by have just selected is recorded. You cannot switch transferring the programme data from the TV set the TV set. over to another channel, it is locked. You can to the VCR via the Euro-AV cable (not satellite You can display up to two control bars but they only switch over when the recording has fin- programs). Every time you change the channel are only displayed by logged in VCR’s and DVD ished. memory of the TV, you are asked whether you players. Exceptions: want to make a data transfer. V= Show/hide video 1. You have installed several tuners (not PIP The receiver unit of the VCR is always used for control bar tuners) in the TV set, then you can watch recording with a Digital Link Plus video recorder DVD STOP another channel with the second tuner. (not satellite channels) and the tuner of the TV ▼ ▼ ▼ ■ ❚❚ ▼ ▼ ▼ ▼ 2. You can also watch the signal via an AV set is available for watching TV. VCR STOP connection (e.g. DVD player or a second Loewe VCRs also have Digital Link, a system for ▼ ▼ ■ ❚❚ ● ▼ ▼ ▼ AUX VCR). controlling Loewe VCRs via the Euro-AV cable. If i Info 3. In a VCR with Digital Link Plus the VCR tuner the Loewe VCR only has Digital Link, the TV tuner OK M Menu is used for the recording (not for satellite E End is used for recording. If you have installed your programs). Loewe VCR in a concealed place, you can operate Select the video control bar if the Loewe VCR with the remote control. Operati- several VCR’s or a DVD player Video menu on with the control bar also works with Digital and a VCR are connected. M Launch the Video menu Link.
Video menu Digital Link must be switched on on the Select function Timer recording video recorder. Timer change Delete timer Only use fully wired Euro-AV cables, otherwise Connections Digital Link or Digital Link Plus will not work. Switch VCR/DVD on/off Select video input (Euro-AV AUX socket) for the VCR i Info OK M Back ▼ ▼ Rewind (only for VCR) or Scan E End in rewind ■ Stop (STOP)
Playback (PLAY) ▼ Fast forward (only for VCR) or
▼ ▼ Scan in fast forward
17 Operating additional equipment
Logging in equipment Search for and store the VCR channel (if Manual adjustment Search for Range UHF You have already logged in and connected all there is no Euro AV cable) Channel E37 (E21...E69) channel (blue Frequency 599.25 MHz Name VIDEO connected devices (video recorders, camcorders, Switch on the test channel on the VCR or insert TV stand. B/G button) DVD players, DVD recorder , Loewe audio a recorded tape and start playback. Col. st. Autom. When the channel is found: 0-9:Entry i Info system, Pay-TV decoders, Loewe home Then launch programme 0 on the TV set (set ex- OK Search M Back automation, door intercom) with the connection factory to channel 36). Select the first menu item Store E End Store (red wizard when you put it into operation for the (VCR) in the AV selection list. button) first time. If you want to connect further or To prevent ”normal” TV channels being found in different devices, you have to call the connection the search, pull out the antenna plug from the A list of the stored channels is displayed wizard in the TV menu – ”Connections”. antenna input of the VCR temporarily (the plug Store 0 VIDEO 9 S–RTL 18 KIKA attached to the cable to the antenna system). 1 ARD 10 N–TV 19 PHOENIX 2 ZDF 11 DSF 20 EUROSPRT Connecting VCR equipment 3 SAT.1 12 TM3 21 KABEL 1 TV menu Launch the TV 4 RTL 13 PRO7 22 MTV In addition to the connection via the Euro-AV 5 VOX 14 RTL 2 23 CNN INT. M 6 S–RTL 15 WDR 3 24 HOT Standard settings menu 7 N–TV 16 BR 3 25 TV 5 socket, you also have to connect the antenna Picture 8 DSF 17 HR 3 26 VIVA Sound (only for antenna or cable systems) through the i Info zap2text Mark ”Settings” OK Insert station M Back VCR to the TV set. The antenna signal is then E End Connections Overwrite station available both to the tuner in the VCR and the TV Settings tuner. Overwrite programme (pro- Settings gramme 0 marked) Stations OK Launch AV settings Child lock On-screen displays E Hide menus Timer functions Mark Time and date Plug the antenna plug back into the VCR. other ... ”Stations” If you now get interference because a TV chan- Stations nel is transmitting on the same channel as the Automatic search Launch VCR channel, you have to change the transmit- Manual adjustment OK Sort ting channel on the VCR (see operating instruc- Delete Enter/change name Mark ”Manual tions of the VCR) and search for the VCR chan- Preferred stations
DIG IN nel on the TV again . 1 setting” RC5/RC6 SAT SERVICE IR 2 CTRL
SAT A/D VGA DIG OUT AUDIO IN AV1 AV2/RGB AV3 R AUDIO OUT VHF/UHF L SUR Manual adjustment C R SUBWOOFER STAND SUB L Range VHF UHF Cable Channel E36 OK Launch Frequency 591.25 MHz Name VIDEO TV stand. B/G Col. st. Autom. Mark ”Range”
i Info and OK Search M Back Select ”UHF” RFin Manual adjustment AV1/TV Range UHF RFout Channel E30 (E21...E69) AV2/Dec Frequency 543.25 MHz Mark ”Chan- Name VIDEO TV stand. B/G nel” Col. st. Autom.
0-9:Entry i Info OK Search M Back Enter channel Store E End 3 0 30
18 Operating additional equipment
Video playback Launch the AV channel via the AV selection In order to see the VCR picture on your TV and hear its sound you have several possibilities: 0 Launch AV selection list 1. You can use the Euro-AV sockets on the TV set and on the VCR. This is the best option of AV Selection VIDEO AV1 AV2 AV3 AVS all – good picture and sound quality. If you are playing back from a VCR with Select AV socket or VIDEO for Digital Link Plus, the VCR picture is shown on VCR transmitter. the current channel slot. If you are playing back from a standard VCR, Now you will see the playback from the con- DVD player or camcorder, select the AV nected AV unit. socket to which the video signal is connected in the AV selection list or the channel table. Launch the AV channel via the channel Video recorders emit a switching voltage overview during playback which the TV set can decode (can be activated for every VCR in the con- OK Launch the channel table nection wizard). Then the VCR picture is
shown on the current channel slot as in Dig- Channel overview: TV Numerical AVS 6 S–RTL ital Link Plus VCR’s. AV3 7 N–TV AV2 8 DSF AV1 9 TM3 2. You use the antenna connection between the 0 VIDEO 10 PRO7 1 ARD 11 RTL 2 2 ZDF 12 WDR 3 VCR and the TV set. The sound is only broad- 3 SAT.1 13 BR 3 4 RTL 14 HR cast in mono. To do this, select the first menu 5 VOX 15 MDR 3 item, e.g. VCR, in the AV selection list. 0 ... 9 Select program: Select and Change programs i Info OK press OK to proceed Favourite programs M Menu Change sorting E End
In the numerical sorting you will always find the AV sockets at the top of the list without channel numbers.
Mark the AV socket
Now you will see the playback from the con- nected AV unit.
19 Operating additional equipment
Direct operation of Loewe VCRs and DVD Select the equipment to be operated: The TV cannot be operated if VTR or DVD is players. for VCR: switched on. In this case switch back to TV or wait You can switch over the remote control of the the VTR indicator on the remote 20 seconds until the remote control automatically TV set to operate Loewe video recorders and control lights up ... switches back to TV mode (none of the indicators Loewe DVD players. These devices can be lights). press again, the DVD indicator operated directly or, in the case of equip- lights up ... ment installed in a concealed place, by Loewe VCRs VV3600H, VV8500H and VV5000M the TV set. Then the digital link function press again, none of the indica- cannot be controlled with this remote control. must be activated on the VCR. tors lights, the TV is then acti- Please use the original remote control or the vated. video bar.
Functions for Loewe VCRs Functions for Loewe DVD players Select sound /station language Control 150 Select language Indicator: control VCR VTR selection Indicator: VCR control VTR Control 150 Select picture and Indicator: control DVD DVD Indicator: DVD control DVD sound source Select subtitles Select set to be Switch on/off Select direct control operated TV/DVD/VCR in Standby Power on/off LP 000 for DVD/TV/VCR – Standby Display/close SV SV LP 000 ShowView timer Menu V= Display/close Timer list Select camera angle V= Show/hide OSD menu switch to Long Play Counter reset Repeat chapter/title/ Select title/chapter /Standard Play entire DVD/Repeat off via menu 1 2 3 1 2 3
4 5 6 Select station directly 5 Number buttons In menu: enter digits 4 6 7 8 9 7 8 9 0 Show/hide DVD 0 Call up VCR Menu Status display In menu: close menu Hide OSD menu strip Pause (still frame) M E Pause or still M E /frame-by-frame T i Start recording (+ ) T i Slow motion advance /Frame-by-frame Call up station list Station selection Menu control: up/down in menu: call up/confirm Enter menu selection /manual tracking move selection up/down Slow motion forwards Direct control: Menu control: In menu: OK In menu: select/set OK select position Pause/Frame-by-frame (top) move selection left/right; Reverse play Slow motion (bottom) Direct control: Fast In menu: select/set forward/reverse Rewind Fast forward Previous chapter/title Next chapter/title /search backwards /search forwards /Fast reverse /Fast forward Stop tape Start playback STOP Play
20 What to do if …
Problem Possible cause Remedy
Various menu items cannot be launched ”Simplified control” activated in main informa- Deactivate ”Simplified control” in the main infor- (shown in grey) or the menus for the EPG and tion mation. Press the i-button, select ”Select control teletext modes of operation cannot be level” and launch with OK. Set the ”Simplified launched control” to ”no”.
Timer recording, Change timer and Clear timer No video recorder logged in Log in VCR in the TV menu are not shown in the Video menu - Connections.
”Connections” cannot be launched in the Video a) A timer recording is currently in progress a) Wait until the timer recording has ended or menu (shown in grey) clear the timer. b) You are recording from the TV set with the b) Wait until you stop recording. video bar
The ”Channels” item in the TV menu and the The child lock is activated. If these menus were Deactivate programme-related child lock: Switch ”Automatic channel search” item in the main accessible, children could still set the programs. off child lock or enter PIN in the TV menu - Set- information cannot be launched tings.
Control of the Loewe VCR with the video con- a) The VCR’s Digital Link function is not activated a) Activate Digital Link in the VCR (see operating trol bar and the timer does not work or does or not possible instructions of the VCR) not work properly b) Euro-AV cable not connected b) Connect the Euro-AV cable c) Video recorder not logged in c) Log in the VCR
General problems with connecting external a) The device is not logged in to the ”Connec- a) Compare the connection diagram with the devices through an AV input tions” menu or is connected differently to actual installation in the ”Main information” shown in the connection diagram under ”Connections” and connect as shown if necessary. b) The AV norm is set incorrectly b) Set the correct norm. c) The AV signal is set incorrectly c) Set the correct AV signal. If ”Automatic” is set for AV norm or AV signal, this can lead to wrong detection in the case of non-standardized signals. In this case the norm and signal must be set according to the oper- ating instructions of the external device.
Picture shifted horizontally The TV set is in the Southern hemisphere (e.g. Set the horizontal position: Australia, South Africa) a) Launch the main information with i b) Launch Index – Set picture – Horizontal displacement c) Set horizontal picture position.
21 What to do if …
Problem Possible cause Remedy
Connection of a decoder does not work or does a) The signal is not decoded because the correct a) Follow the instructions in the TV menu – not work properly decoder programs have not been selected in Connections again and select the appropri- the TV menu - Connections ate decoder programs. b) The sound is missing in decoder mode be- b) Follow the instructions in the TV menu – cause the wrong decoder sound is allocated Connections again and select the right sound in the TV menu - Connections source (decoder, TV or Autom.), see instruc- tions of the decoder.
No sound through the TV loudspeakers a) The item ”Sound from...” in the Sound menu a) Change the setting to ”TV”. under ”Sound” is not set to ”TV” b) Either a dummy plug with bridges, Loewe b) Nothing is inserted in the 9-pole cube socket active loudspeaker system, the transmitter on the back of the set for the home automation or a subwoofer must be plugged into the cubic socket.
All menus appear in the wrong language The wrong menu language has been set Set your menu language: 1. Switch off picture-in-picture (PIP)✳ and switch off all on-screen displays, press the E button 2. Launch the TV menu (M button) 3. Select the last menu item and press OK 4. Select the last menu item on the last page and press the OK button 5. Now select the right language and 6. ... confirm with OK.
Digital Link Plus does not work a) The VCR has not been logged in as a Digital a) Log in the Digital Link Plus VCR under ”Con- Link Plus device or has been connected to the nections” and connect according to the wrong socket diagram. b) The Euro-AV cable is not fully wired (Pin 10 b) Change the Euro-AV cable not wired) c) Some video recorders can only take over the c) Reinstate the original state (ex-factory) of channels from the TV in initial installation the VCR (see operating instructions of the d) All or some terrestrial or cable channels are VCR) stored at channel slots G 99 d) Sort the terrestrial and cable channels so that they are between 1 and 99.
Various characters are displayed incorrectly in The wrong character set is set in the teletext Set the right character set: Teletext menu – teletext menu Settings – Character set – Standard or the ap- propriate character set.
22 Technical data
Connections Mechanical data Electrical data Mini-DIN (Front) Video IN Y/C (S-VHS/Hi8) Aventos 3781 ZW Item no. 63445 Chassis name Media Plus (Q2500M) Cinch (Front) Video IN CVBS (VHS/8mm) Image refresh frequency PAL/Secam 100 Hz Cinch (Front) Audio IN L+R Dimensions (cm) 81x59,5x55,5 (w x h x d) ✳ Weight (kg) 53 PAL 60/NTSC 60 Hz proscan Jack 6.3mm headphones 32–200 Ohm Full Digital 100 AMD/DMI/DNC IEC socket 75 Ohm antenna / cable Picture tube Real Flat-Line ✳ Format 16 : 9 Power supply 220V up to 240V/50–60Hz F-socket 75 Ohm SAT and SAT A/D Screen class 81 cm, visible 76 cm Power consumptionIn operation approx. 145 Watt AV 1 Video IN/OUT Y/C (S-VHS/Hi8) Standby <2 Watt Video IN/OUT CVBS (VHS/8mm) Aventos 3981 ZW Item no. 62405 Sat-Record-Mode <60 Watt Audio IN/OUT L+R Dimensions (cm) 81x59,5x55,5 (w x h x d) Ambient temperature 5º – 40º Celsius AV 2 Video IN/OUT✳✳ Y/C (S-VHS/Hi8) Weight (kg) 53,5 Tuner VHF/UHF/ cable Video IN/OUT CVBS (VHS/8mm) Picture tube Real Flat-Line (Hyperband 8 MHz) 42 MHz – 860 MHz Video IN RGB Format 16 : 9 ✳ Channel memory 220/with DVB:1470 Audio IN/OUT L+R Screen class 81 cm, visible 76 cm ✳ TV standards B/G, I, DK, L, L‘, M, N AV 3 Video IN Y/C (S-VHS/Hi8) ✳ Mimo 32 Item no. 62430 Colour standards PAL, SECAM, Video IN/OUT✳✳✳ CVBS (VHS/8mm) Dimensions (cm) 81x61,5x57,5 (w x h x d) NTSC, NTSC 4,43 Video IN RGB or YUV Weight (kg) 54 Sound standards FM, AM, Nicam Audio IN/OUT✳✳✳ L+R Picture tube Real Flat-Line mono/stereo/2-sound Cinch Audio OUT level adjustable/fixed Format 16 : 9 Audio rated output 2 x 15 Watt / 4 Ohm Jack 3.5 mm Audio IN L+R Screen class 81 cm, visible 76 cm Aventos 2 x 12 Watt / 4 Ohm 9-pole cube socket home automation or Vitros 6381 ZW Item no. 61426 Audio music output 2 x 20 Watt / 4 Ohm Loewe active loudspeaker systems Dimensions (cm) 85,5x62x59,5 (w x h x d) Aventos 2 x 16 Watt / 4 Ohm Mini-DIN 8-pole Service or Loewe audio systems Weight (kg) 57 Teletext HiText (Level 2.5) Jack 3,5mm ✳ IR Link OUT Picture tube Real Flat-Line Cinch✳ Centre OUT Centre signal Format 16 : 9 Cinch✳ Subwoofer OUT LFE-Signal Screen class 81 cm, visible 76 cm Cinch✳ Surround OUT L+R ✳ Xelos 5381 ZW Item no. 61420 Cinch Dig. Audio IN 1 Multichannel signal ✳ Dimensions (cm) 83x62,5x58 (w x h x d) Cinch Dig. Audio IN 2 Multichannel signal ✳ Weight (kg) 50 Cinch Dig. Audio OUT Multichannel signal Picture tube Super Flat-Line ✳ depending on equipment and type of set or Format 16 : 9 retrofittable Screen class 81 cm, visible 76 cm ✳✳ OUT only in Digital Link Plus video recorders ✳✳✳ OUT Monitoring picture and sound
23 Accessories available
Racks VGA connection upgrade kit for use with a Ask your dealer, he will be able to offer you the PC right rack from the Loewe range to suit your TV This transforms your TV set into a VGA monitor. set. (not available when used with the Online-mod- Loewe audio systems and active ule). loudspeaker systems IR-Link A combination of a Loewe TV set, a Loewe This enables you to control a concealed video audio system and a Loewe loudspeaker system recorder made by another manufacturer or d- provides an excellently adapted Home Cinema box with the original remote control via the TV system with the advantages of high operating set. comfort, matching design and adapted technol- Home automation ogy. Controlling of light switches, dimmers, rolling Internal radio transmitter and radio shutters etc. with the TV set menu. headphones Loewe Video Recorders for cordless sound transmission to Loewe HS82 Loewe video recorders are specially adapted in radio headphones or for surround sound to radio design, user guidance and technical character- speakers (e.g. L82 HF) with an integrated Dolby istics to Loewe TV sets with the result that daily Digital Decoder. handling of the equipment is made much sim- Single-/Twin-Sat tuner and Digital-TV pler. decoder Loewe DVD-Players Your TV set can be retrofitted with an inte- The DVD-Players from Loewe are characterised grated SAT 6 or TWIN-SAT 6 and a Digital-TV by form and colour which match Loewe TV sets, decoder. A combination of the two components adapted user guidance and technology. A com- enables you to receive analogue and digital bination of the two devices forms a system satellite programs. All uncoded digital pro- which offers many advantages. grams can be received with the Digital-TV upgrade kit 1 Sat/Twin-Sat. An additional Dig- ital-TV upgrade kit 2 Sat/Twin-Sat-CI P is avail- able for Aventos 3981 ZW, Mimo 32 and Vitros 6381 ZW TV sets which is suitable for Premiere. Dolby Digital Decoder for multichannel playback of DVD players in Dolby Digital cinema quality. The Dolby Digital Decoder is integrated into the TV set. Online-Module For convenient internet access and E-mail. Everything can be accessed via the remote con- trol or the optional infra red keyboard.
24 Service addresses Australia Germany Poland International Dynamics Australasia Pty Ltd. Loewe Opta GmbH Piotech 129 Palmer Street Kundendienst Zentrale ul. Boh. Getta Warszawskiego 18 AUS - Richmond, Victoria 3121 Indurstriestraße 11 PL–81-609 Gdynia Tel. 03–94 29 08 22 D–96317 Kronach Tel./Fax 058–62 43 467 / 058–62 45 009 Fax 03–94 29 08 33 Tel. 09261–990 Portugal Fax 09261–95411 Austria Videoacustica Robert Bosch AG Great Britain Comercio e Representacoes de Postfach 146 Linn Products Limited Equipamentos Electronicos S.A. A–1011 Wien PO Box 8465 Estrada Circunvalacao Tel 01–79 72 24 500 Prestwick Quinta do Paizinho, Arm. 5 Fax 01–79 72 24 599 UK – KA 7 2YF P–2795-632 Carnaxide Tel. 01292–47 15 52 Tel. 21–42 41 770 Benelux Fax 01292–47 15 54 Fax 21–41 88 093 Loewe Opta Benelux NV/SA Uilenbaan 84 Greece Slowenia B–2160 Antwerpen SOUND HELLAS S.A. Jadran Trgovsko Podjetje Tel. 0902–88 00 2 Kleanthous Str. 10 Partizanska cesta 69 Tel. 03–270 99 30 GR–54642 Thessaloniki SL–6210 Sezana Fax 03–271 01 08 Tel. 2310–856 100 Tel. 057–391 402, 391 406 Loewe Opta Nederland B.V. Fax 2310–856 300 Fax 057–391 400 Ravenswade, 54A1 Hungary South Africa NL–3439 LD Nieuwegein (Utrecht) Basys Magyarorszagi KFT THE SOUNDLAB PTY LTD Tel. 0900–20 20 180 Epitok utja 2–4 P.O. Box 757 Fax 030–280 33 27 H–2040 Budaörs Parklands 2121 CIS Tel. 023–415 637/121 Republic of South Africa Service Center Loewe Fax 023–415 182 Tel. 011–44 76 575 ul. Verkhnyaya Maslovka, d. 29 Israel Fax 011–44 76 662 RUS–125083 Moscow RIF TRADING LTD Spain Tel. 095–212 50 43, 956 67 64 29 Izhak Sade Street Gaplasa S.A. Fax 095–212 47 10 ISR–Tel Aviv 67213 Conde de Torroja, 25 Cyprus Tel. 03–62 40 555 E–28022 Madrid L&M Eurappliances Ltd Fax 03–62 40 303 Tel. 91–748 29 60 P.O. Box 23426 Italy Fax 91–329 16 75 Kennedy Avenue 1A&B General Trading SpA Sweden CY–Nicosia Via Vittorio Emanuele, 33 Canseda AB Tel. 02–42 05 10 I–50041 Calenzano (FI) Amalia Jönssons Gata 19 Fax 02–42 87 70 Tel. 055–88 11 71 S–421 31 Västra Frölunda Czech Republic Fax 055–88 11 74 0 Tel. 031–70 93 760 TIPA sdruzení Malta Fax 031–47 65 15 Dolní nám. 9 Mirage Holdings Ltd Switzerland CZ–746 01 Opava 1 Flamingo Complex Telion AG Tel: 0653-62 49 44 Cannon Road Rütistrasse 26 Fax: 0653-62 31 47 M–Qormi CH-8952 Schlieren Denmark Tel. 49 71 82 Tel. 01–732 15 11 Kjaerulff 1 Development A/S Fax 44 59 83 Fax 01–730 15 02 Vestre Stationsvej 9 Marocco Turkey DK–5000 Odense C SOMARA S.A. Enkay Elektronik Servis Müdürlügü Danmark 377, Rue Mustapha El Maani Alemdag Cad: Site Yolu No.: 10 Tel. 661 354 80 MA–20000 Casablanca Ümraniye/ Istanbul Fax 661 354 10 Tel. 02–22 20 308 Tel. 0216–523 15 94/96 France Fax 02–22 60 006 Fax 0216–523 16 58 Sorep Import S.A. Norway 11 rue de la Durance CableCom AS F–67100 Strasbourg Cédex 1 Østre Kullerød 5 Tel. 03–88 79 72 50 N–3214 Sandefjord Fax 03–88 79 72 59 Tel. 033–48 33 48 Printed in Germany Fax 033–44 60 44 8/06.03/10,0 Subject to modifications 25 The code number 3001 cancels out a secret ✄ code and with it the child lock.
Please keep it in a
safe place.
26