DOCSLIB.ORG

Paint Testing Table of Contents

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Paint Testing Table of Contents Paint Testing Table of Contents Abrasion Testers ............................................................. 3 Leveling Test Blade ....................................................... 29 Anemometers ................................................................. 3 Liquid Color Meter ........................................................ 29 Applicators ....................................................................... 4-6 Lubricating Grease ........................................................ 30 Aprons ............................................................................... 6 Micro Grinder .................................................................. 30 Aquametry Titration Units .......................................... 6 Moisture Pans ................................................................. 30 Balances ............................................................................ 6-7 Paint Test Charts............................................................. 30-31 Barometer ........................................................................ 7 Paint Thermometers ..................................................... 31 Beakers .............................................................................. 7-9 pH Buffers ......................................................................... 31-32 Bottles ................................................................................ 9-12 pH Electrodes .................................................................. 32 Brushes .............................................................................. 12-13 pH Meters ......................................................................... 32-33 Calibration Holders ....................................................... 13-14 Pipets ................................................................................. 33 Calipers.............................................................................. 15 Pre-Cut Aluminum Squares ....................................... 33 Cheese Cloth ................................................................... 15 Pumps ................................................................................ 33 Cleaners ............................................................................ 15 Refractometers ............................................................... 34 Cleaning Cloths .............................................................. 15 Sample Containers ........................................................ 34 Color Comparators ........................................................ 16 Shakers .............................................................................. 35 Color Standards .............................................................. 16 Sieves ................................................................................. 35-37 Conductivity Calibration Solutions ......................... 16 Spatulas ............................................................................ 37-38 Cross-Cut Tool Kits......................................................... 17 Steel Test Panels ............................................................. 38 Cups ................................................................................... 17 Stirrers ............................................................................... 39 Cylinders, Graduated .................................................... 17 Thermometers ................................................................ 39 Desiccator Cabinets ...................................................... 18 Thickness Check Standard ......................................... 39 Desiccator Plates............................................................ 18 Thickness Gauge ............................................................ 39-41 Desiccators....................................................................... 18-19 Timers ................................................................................ 41-42 Detergents ....................................................................... 19 Tongue Depressor ......................................................... 42 Dispensers ........................................................................ 20 Tool Kits ............................................................................. 43 Extraction Thimbles ...................................................... 20-21 Trays, Stainless Steel ..................................................... 43 Face Shields ..................................................................... 21 Tubing ............................................................................... 44 Flash Point Testers ......................................................... 21 Vacuum Plates ................................................................ 44 Flasks .................................................................................. 22 Viscometers ..................................................................... 45-46 Furnaces ............................................................................ 22-23 Viscosity Standards ....................................................... 46-48 Gauges, Grind ................................................................. 23-25 Viscosity Cups ................................................................. 48-49 Gel Time Meters ............................................................. 25 Water Baths ...................................................................... 49-50 Gloss Meters .................................................................... 25-26 Wedge Plates .................................................................. 50 Gloves ................................................................................ 26-28 Weigh Dishes .................................................................. 50-51 Heating Mantels ............................................................. 28-29 Weight Per Gallon Cups .............................................. 51 Inspection Stations ....................................................... 29 Wipers ................................................................................ 52 Paint Testing Top 100 Thomas # Manu # Brand Description Abrasion Testers Abrasion Tester Helps evaluate washability and abrasion resistance � Reciprocates an abrasive force linearly over the sample � Utilizes a brush, sponge or abrasive paper to simulate real life situations that must meet several standards � Completely enclosed electrical and mechanical components for dry or wet testing � Conforms to ASTM D 2486 7296B50 AG-8100 BYK-Gardner Abrasion Tester, 115 V, 60 Hz 7296B55 AG-8101 BYK-Gardner Abrasion Tester, 230 V, 50 Hz 7296B60 AG-8110 BYK-Gardner Brush Holder And Mat, 1.5 X 3.5’ 7296B63 AG-8111 BYK-Gardner Nylon Brush 7296B69 AG-8120 BYK-Gardner Lilly Frame, 17’ L 7296B72 AG-8122 BYK-Gardner Brass Shim, 6.5” X 0.5” X 10 Mils 7296B75 AG-8124 BYK-Gardner Polished Brass Plate, 6.5” X 17.9” X 0.25” 7296B79 AG5390 BYK-Gardner Scrub Test Panels, 6.5” X 17” X 10 Mils, Pk 100 7296B66 AG-8112 BYK-Gardner Hog Bristle Brush Positest Pull-Off Adhesion Tester Precisely measures adhesion of coatings to metal, masonry and other substrates � Self-alignment feature � NIST Calibrated and certified to ±1% accuracy (full scale) � Conforms with ASTM D4541, ISO 4624 � Inexpensive single-use dollies eliminate the need for heating, cleaning or brushing for re-use 7295R11 AT-P Defelsko Adhesion Test/Plastic/Wood/Metal 7295R16 AT-M Defelsko Adhesion Tester/Metal 7295R21 AT Defelsko Adhesion Tester/Concrete Anemometer Kestrel Anemometer � Three operating modes � Large (10 mm high) LCD � Precision, ultralight, anodized aluminum impeller � Water resistant to one meter and it floats 1096A25 0810 Kestrel Anemometer Kestrel 3 Thomas # Manu # Brand Description Applicators Bird Applicators For drawing down wet films of materials in predetermined thicknesses � High grade, bar steel with corrosion resistant, nickel chrome finish � Precision ground to extremely fine tolerances for exact color, gloss and performance evaluations � Conforms to ASTM D 2486 (special order), D 3258, D 3265, D 333 and D 823 6410S01 2001 MCD Applicator 2001 3.5” 2” .001 6410S03 2003 MCD Applicator 2003 3.5” 2” .003 6410S05 2004 MCD Applicator 2004 3.5” 2” .004 6410S07 2006 MCD Applicator 2006 3.5” 2” .006 6410S09 2012 MCD Applicator 2012 3.5” 2” .012 6410S11 3001 MCD Applicator 3001 4.5” 3” .001 6410S13 3002 MCD Applicator 3002 4.5” 3” .002 6410S15 3003 MCD Applicator 3003 4.5” 3” .003 6410S17 3004 MCD Applicator 3004 4.5” 3 .004 6410S19 3006 MCD Applicator 3006 4.5” 3” .006 6410S21 3012 MCD Applicator 3012 4.5” 3” .012 6410S23 4001 MCD Applicator 4001 5” 3.5” 001 6410S25 4003 MCD Applicator 4003 5” 3.5” .003 6410S27 4004 MCD Applicator #4004 5” 3.5” .004 6410S29 4006 MCD Applicator #4006 5” 3.5” .006 6410S31 4010 MCD Applicator #4010 5” 3.5” .010 6410S33 4012 MCD Applicator #4012 5” 3.5” .012 6410S35 4020 MCD Applicator #4020 5” 3.5 020 6410S37 6001 MCD Applicator #6001 7.5” 6” .001 6410S39 6002 MCD Applicator #6002 7.5” 6” .002 6410S41 6003 MCD Applicator #6003 7.5” 6” .003 6410S43 6004 MCD Applicator #6004 7.5” 6” .004 6410S45 6005 MCD Applicator #6005 7.5” 6” .005 6410S47 6006 MCD Applicator #6006 7.5” 6” .006 6410S49 6007 MCD Applicator #6007 7.5” 6” .007 6410S51 6008 MCD Applicator #6008 7.5” 6” .008 6410S53 6009 MCD Applicator #6009 7.5” 6” .009 6410S55 6012 MCD Applicator #6012 7.5” 6” .012 6410S57 6016 MCD
Load more

Recommended publications
  • Science Equipment
    Block Heaters with BioCote Science Equipment Colony Counter Homogenisers ® Hotplates and Stirrers protection antimicrobial Incubators Melting Point Apparatus Stuart Mixers ® Catalogue Rotary Evaporators Rockers and Shakers Water Baths and Purification Page 1 Bibby Scientific Limited Some of the most famous names in science... As one of the largest broad based manufacturers of benchtop laboratory equipment worldwide, Bibby Scientific Ltd provides internationally recognised brands with reputations for product quality and high performance. These four famous brands are now brought together in a single package to offer an excellent level of quality, service and support. Electrothermal® are the newest addition to the Bibby Scientific portfolio and are market leaders in heating mantle design and manufacture. The extensive Electrothermal® range includes controlled, stirring, Bunsen and spill-proof mantles in various shapes and capacities. Alongside the heating mantle range, Electrothermal® offer an extensive selection of stirrers and melting point apparatus. Jenway® manufactures a wide range of analytical scientific instruments including UV/Vis spectrophotometers, flame photometers, colorimeters, portable and laboratory meters for the measurement of dissolved oxygen, pH, conductivity and specific ions. The extensive Stuart® range includes blood tube rotators, colony counters, hotplates, hybridisation ovens, rockers, shakers, stirrers and water purification systems. Techne® is a world leader in the manufacture of temperature control equipment,
    [Show full text]
  • Heating Mantles - Series TM Mantles
    Glas-Col, LLC General Sales Policy How To Order Restock You can order by contacting one of the many authorized Glas-Col Current models of catalog items returned for credit are subject to distributors located throughout the U.S.A., Canada, and around the Glas-Col’s inspection and a restocking charge of 15% of the original world. They will offer valuable assistance in your selections, delivery purchase price. Items superseded by current models cannot be and service after the sale. Please use our toll-free telephone number, returned for credit. Special, custom-designed items or catalog items 1-800-Glas-Col, if you need the name of a distributor in your area. modified for special voltage, wattage, dimensions, etc., will not be accepted for credit. New Accounts When restock is necessary due to a Glas-Col error in fulfilling an order, full credit will be given immediately upon receipt of the With approved credit, new direct accounts will be opened for order merchandise in question. amounts of $100 net or more. Orders for less than $100 may be prepaid, shipped COD, or paid by Visa, MasterCard, or American Purchaser should not deduct credit until merchandise is received, Express inspected, and a credit memo issued by Glas-Col. Terms Of Payment Inspection/Repair Service Upon approved credit, billing terms are Net 30 days. Otherwise, Glas-Col does not support or authorize any repairs outside of the arrangements may be made for Visa, MasterCard, American Express, factory. Products returned for repair not covered under warranty will advance payment, or COD. Invoices are payable in U.S.
    [Show full text]
  • Heating Mantles
    HEATING MANTLES 17-1000: STIRMANTLE The StirMantle adds electromagnetic stirring capability (50-750 rpm) to the Series TM heating mantle for spherical flasks. Heating and stirring are independent; choose either or both. Speed is easily adjusted by a single dial on the StirControl II. The StirControl II creates and synchronizes the magnetic field. Its stirring speed is extremely stable, even at 50 rpm, despite temperature or load. When restarting (as for removal and reinsertion of the flask), Glas-Col's exclusive "Synchrostart" feature maintains linkage between the field and the bar. At restart, the selected speed is reached in approximately 4 seconds. The StirControl II connects to the StirMantle by cord, so it may be placed outside corrosive hood atmospheres and is easily accessible. Complete Complete StirMantle StirMantle Flask Outside Depth Height System System Only Only Capacity Watts Diameter (in) (in) 115V 230V 115V 230V (ml) (in) 100D 100D 100D 100D 250 180 1.64 6.25 4.75 EMS102 EMS103 TEM102 TEM103 100D 100D 100D 100D 300 180 1.70 6.25 4.75 EMS104 EMS105 TEM104 TEM105 100D 100D 100D 100D 500 270 2.00 6.25 5.25 EMS106 EMS107 TEM106 TEM107 100D 100D 100D 100D 1,000 380 2.56 7.50 5.50 EMS108 EMS109 TEM108 TEM109 100D 100D 100D 100D 2,000 500 3.35 10.00 6.50 EMS110 EMS111 TEM110 TEM111 100D 100D 100D 100D 3,000 500 3.60 10.00 6.50 EMS112 EMS113 TEM112 TEM113 Specifications Complete System: One StirMantle, one StirControl II, connecting cords, and stir bar. Completely grounded and fused.
    [Show full text]
  • Heating Mantles
    SELECTION GUIDE Heating Mantles OUR SELF-SUPPORTED CLOTH- SPILL-PROOF AND V-SHAPED ONE MANTLE—THREE SIZES! MULTI-POSITION HEATERS! JACKETED HEATING MANTLE! HEATING MANTLES! BASIC HEATING MANTLES Product Description Case Construction Built-In Controller Page HOTTEST SELLING COOL CASE HEATING MANTLES! Basic EM Series Polypropylene With/Without 100 TOP OF THE LINE METAL CASE MANTLES! Basic CM, CMU and UM Series Aluminum With/Without 104-106, 109 SO FLEXIBLE IT CAN BE USED FOR ROUND AND FLAT BOTTOM FLASKS! Basic MG Series Mesh No 110 COMPACT, ECONOMICAL CLOTH-JACKETED HEATING MANTLE! Basic HM Series Fiberglass No 111-112 MULTI-POSITION HEATERS! Basic EME and 5000 Series Aluminum With/Without 114-116 SPILL-PROOF HEATING MANTLES SPILL-PROOF AND V-SHAPED HEATING MANTLES! Basic Spill-proof EMX Series Polypropylene Yes 102 V-SHAPED HEATING MANTLES SPILL-PROOF AND V-SHAPED HEATING MANTLES! Basic EMV Series Polypropylene Yes 102 NEWEST-COOLEST INEXPENSIVE METAL CASE HEATING MANTLE! Basic CMUV and CMV Series Aluminum With/Without 104-106 HEATING-STIRRING HEATING MANTLES HEAT AND STIR COOL CASE HEATING MANTLE! Heat-Stir EMA Series Polypropylene Yes 103 NEWEST-COOLEST INEXPENSIVE METAL CASE HEATING MANTLES! Heat-Stir CMUA Series Aluminum No 104 OUR MODULAR HEATING MANTLE! Heat-Stir OM Series Aluminum Yes 108 MULTI-POSITION HEATERS! Heat-Stir EMEA Series Aluminum Yes 114 HIGH TEMPERATURE/RETORT BOTTOM HEATING MANTLES NEWEST-COOLEST INEXPENSIVE METAL CASE HEATING MANTLES! CMUH and CMUR Series Aluminum No 104 VARIABLE SIZED HEATING MANTLES TOP OF THE
    [Show full text]
  • Organic Techniques
    ORGANIC TECHNIQUES Organic techniques Introduction Practical organic chemistry is primarily concerned with synthesising (making) organic compounds and the purpose of a ‘synthesis’ is to prepare a pure sample of a specified compound. Essentially, there are five steps involved: • preparation – the appropriate reaction is carried out and a crude sample of the desired product is prepared • isolation – the crude sample of the product is separated from the reaction mixture • purification – the crude product is purified • identification – the identity of the pure compound is confirmed • calculation of the percentage yield. Apart from the last, each of the steps entails a variety of experimental techniques and operations, and in what follows some of the more important ones will be described. While they will be considered from a practical standpoint, we will touch on their theoretical basis where appropriate. Preparation Most organic preparations are carried out in fairly complex assemblies of glassware. The glassware has ground-glass joints that allow the individual pieces to fit together tightly, thus eliminating any need for corks or rubber stoppers. Suppose we had to prepare a compound that required the reactants to be heated, which is generally the case in organic chemistry. Let’s look at the glassware needed. It is illustrated below and consists of a round-bottomed or pear-shaped flask and a condenser. 26 A PRACTICAL GUIDE (AH, CHEMISTRY) © Crown copyright 2012 ORGANIC TECHNIQUES The assembled apparatus is shown below with the condenser mounted vertically above the reaction flask. The reaction flask should be of a size such that when the reactants are in place it is about half full.
    [Show full text]
  • Heating and Cooling Chemical Mixtures Revision Date: 11/01/19 Prepared By: Michael Roy P.I.: Prof
    Section 5.7 Title: Heating and Cooling Chemical Mixtures Revision Date: 11/01/19 Prepared By: Michael Roy P.I.: Prof. John F. Berry Prior Approval: This procedure is NOT considered hazardous enough that prior approval is needed from the Principal Investigator. Involves Use of Particularly Hazardous Substance (PHS)? No ___ Carcinogen ___ Reproductive Toxin ___ High Acute Toxicity Does this procedure require medical surveillance? No Does this require use of a fit-tested respirator? No Brief Description of Procedure: Overview of common heating and cooling methods used in the Berry labs. Location: List the locations (buildings/rooms) where this procedure may be performed. For use of a PHS indicate a more precise location within the room, if appropriate, as a designated area. Daniels Chemistry - All Berry group labs Chemicals Involved: Chemical Physical or Health Hazard (e.g. carcinogen, corrosive) Organic solvents (cooling) Consult relevant SDSs for more details Dry ice Frostbite Liquid nitrogen Frostbite, asphyxiation Other Hazards: Include hazards, other than chemical, that may be present during operation of the procedure. Burns (heating) and frostbite (cooling). Exposure Controls: (Check all that apply) PPE: _X_ Safety Glasses ___ Face Shield ___Chemical Splash Goggles ___Chemical Apron _X_ Gloves (Nitrile) _X_ Lab Coat ___Respirator (type) ___Other: Engineering Controls: _X_ Fume Hood ___Biosafety Cabinet ___ Glove box ___ Vented gas cabinet ___Other: Administrative Controls: List any specific work practices needed to perform this procedure (e.g., cannot be performed alone, must notify other staff members before beginning, etc.). N/A Task Hazard Control Table: For procedures involving numerous steps, it may be convenient to indicate specific requirements for individual tasks in the table below: N/A Waste Disposal: Describe any chemical waste generated and the disposal method used.
    [Show full text]
  • Chemistry 59-240
    CHEMISTRY 59-240 PHYSICAL CHEMISTRY LABORATORY MANUAL FALL 2010 10th Edition - Version 1.3 DEPARTMENT OF CHEMISTRY & BIOCHEMISTRY UNIVERSITY OF WINDSOR 0 TABLE OF CONTENTS GENERAL INSTRUCTIONS Emergency Procedures............................................................................................................ 3 Safety Regulations & Quiz....................................................................................................... 9 Policy on Plagiarism................................................................................................................ 21 Student Contract...................................................................................................................... 25 Marking Scheme and Outline................................................................................................. 27 Medical Certificate .................................................................................................................. 31 EXPERIMENTS Experiment 1: Determination of ΔcH: Bomb Calorimetry.......................................................... 33 Experiment 2: Vapour Pressure of Pure Liquids....................................................................... 41 Experiment 3: Surface Tension of n-Butanol and Amount Adsorbed....................................... 49 Experiment 4: Heat of Reaction in Solution: Constant Pressure Calorimeter.......................... 55 Experiment 5: Liquid-Vapour Equilibrium in a Binary System.................................................. 59
    [Show full text]
  • Equipment Safety Doc
    Equipment Safety Doc. No. IITB/ISG/01/Rev.0 Introduction Some of the hazards related with equipment used in research labs include Electrical hazards Hot surface which can cause burns and which can be a source of ignition. High noise levels Unguarded rotating parts Use of vacuum which can cause implosion. Use of high pressure Generation of magnetic fields Ultra violet and infra red radiation Many accidents in research laboratories result from improper use and lack of maintenance of equipment. The following precautions must be adopted while working with equipment in the laboratory. Refer the operating manual/user manual of the equipment before starting operation. The manual will contain details of hazards and safety precautions to be taken during installation, operation and maintenance. The operating manuals of equipment must be located at an easily accessible location in the laboratory. Personnel who are not authorised and trained must not carry out operation of the equipment. New users must carry out the operation under guidance of senior research scholars. A schedule for maintenance and inspection of equipment must be prepared as per manufacturer’s instruction and must be adhered to. Unauthorised maintenance activity must not be done. Service personnel must be contacted where required. Switch off and unplug the equipment while making adjustments. Switch off the equipment at the end of the operation and when not in use. Page 1 of 9 Equipment Safety Doc. No. IITB/ISG/01/Rev.0 Use personal protective equipment as recommended by the manufacturer while operating the equipment. Equipment with specific hazards must not be left unattended.
    [Show full text]
  • 1 Experiment 3. Heat-Capacity Ratios for Gases. Adiabatic Expansion
    Experiment 3. Heat-Capacity Ratios for Gases. Adiabatic Expansion Method Background For the reversible adiabatic expansion of a perfect gas, the change in energy content is related to the change in volume by nRT dE = − pdV = − dV = −nRTd lnV (4) V Since E for a perfect gas is a function of temperature only, we can also write dE = CvdT. Substituting this expression into Eq. (4) and integrating, we find that ~ ~ T2 V2 Cv ln = −R ln ~ (5) T1 V1 ~ ~ where Cv and V are molar quantities (that is, Cv/n, V/n). We assumed here that Cv is constant over the temperature range involved. Eq. (5) predicts the decrease in temperature resulting from reversible adiabatic expansion of a perfect gas. In experiment, we will use the following two-step process involving a perfect gas denoted by A: Step I: Allow the gas to expand adiabatically and reversibly until the pressure has dropped from p1 to p2: ~ ~ A(p1 ,V1 ,T1 )→ A(p2 ,V2 ,T2 ) (6) Step II: At constant volume, restore the temperature of the gas to T1: ~ ~ A(p2 ,V2 ,T2 )→ A(p3 ,V2 ,T1 ) (7) For step I, we can use the perfect-gas law to obtain ~ T2 p2V2 = ~ (8) T1 p1V1 ~ ~ Substituting Eq. (8) into Eq. (5) and combining terms in V2 V1 , we can write ~ ~ ~ C ~ p2 − (Cv + R) V2 p V2 ln = ~ ln ~ = − ~ ln ~ (9) p1 Cv V1 Cv V1 since for a perfect gas ~ ~ C p = Cv + R (10) 1 For step II, which restores the temperature to T1, ~ V2 p1 ~ = (11) V1 p3 Thus ~ p1 C p p1 ln = ~ ln (12) p2 Cv p3 This can be rewritten in the form ~ C p ln(p1 p2 ) γ ≡ ~ = (13) Cv ln(p1 p3 ) The goal of our experiment is to obtain γ for two gases, N2 and Ar, through measurements of p1, p2, and p3.
    [Show full text]
  • Safety in Academic Chemistry Laboratories
    Safety in Academic Chemistry Laboratories 8TH EDITION BEST PRACTICES FOR FIRST- AND SECOND-YEAR UNIVERSITY STUDENTS A Publication of the American Chemical Society Joint Board–Council Committee on Chemical Safety CHAPTER 4 Recommended Laboratory Techniques Introduction Chapter 3 described some types of physical, health, and environmental chemical hazards and the effects of being exposed to chemicals. The focus of this chapter is on how to safely perform common laboratory techniques and safely handle the most common equipment in the undergraduate chemistry laboratory. The techniques and advice in this booklet focus on those topics most commonly encountered in first- and second-year courses in college. There is brief mention of some advanced topics that you may encounter in upper-level courses in the “In Your Future” sidebars, Hierarchy but a thorough presentation of MOST EFFECTIVEElimination/ advanced techniques is beyond Substitution of Controls the scope of this publication. Requires a physical The references in the Appendix Engineering Controls change to the point to other sources of safety workplace information. Administrative Controls Requires worker As discussed in Chapter 1, or employer to the RAMP system is a useful including Work Practices do something paradigm when you work in the laboratory. Chemical safety Requires workers Personal Protective Equipment to wear something must be the priority of everyone. LEAST EFFECTIVE Apply the RAMP concept as 46 CHAPTER 4 you prepare for each laboratory session. Once hazards have I been recognized and assessed, they must be minimized or Hierarchy of Controls Recommended managed. Minimizing hazards to reduce risk involves adding Elimination: the initial design of controls or placing barriers between the worker and the the facility, equipment, chemicals, or process to remove hazards.
    [Show full text]
  • Jenway Catalogue 2012
    Double Beam Spectrophotometers Equipment forAnalysis Life Science Spectrophotometers UV/Visible Spectrophotometers pH Meters Ion Meters Flame Photometers Fluorimeters Dissolved Oxygen Meters Conductivity Meters Colourimeters Bibby Scientific Limited Some of the most famous names in science... As one of the largest broad based manufacturers of benchtop laboratory equipment worldwide, Bibby Scientific Ltd provides internationally recognised brands with reputations for product quality and high performance. These four famous brands are now brought together in a single package to offer an excellent level of quality, service and support. A Bibby Scientific Company Electrothermal are the newest addition to the Bibby Scientific portfolio and are market leaders in heating mantle design and manufacture. The extensive Electrothermal range includes controlled, stirring, Bunsen and spill-proof mantles in various shapes and capacities. Alongside the heating mantle range, Electrothermal offer an extensive selection of stirrers and melting point apparatus. Jenway® manufactures a wide range of analytical scientific instruments including UV/Vis spectrophotometers, flame photometers, colorimeters, portable and laboratory meters for the measurement of dissolved oxygen, pH, conductivity and specific ions. The extensive Stuart® range includes blood tube rotators, colony counters, hotplates, hybridisation ovens, rockers, shakers, stirrers and water purification systems. Techne® is a world leader in the manufacture of temperature control equipment, including
    [Show full text]
  • Full-Catalog.Pdf
    ® Scientifi c, Inc. Instruments for Science from Scientists J-KEM Temperature Control Reaction Automation Custom Robotics J-KEM Scientifi c 2009 Product Highlights Digital Temperature Controllers Precision Temperature Controllers for Research in • Regulate volumes from 100 µL to 22 L 2009 High Power & High Safety Controllers NEW • Reactors up to 100 L • USB standard on all 200-Series temperature Economy Temperature Controllers and vacuum controllers • Free Windows control & Digital Vacuum Regulator data logging software • Digital Control of Vacuum Pressure from 760 to 0.1 torr • 0.1o C Regulation • Regulate Vacuum to 0.1 torr with DVR-1000 < 1o C Over-shoot Parallel Synthesis & Lab Automation Equipment Syringe Pumps Parallel Reaction Systems • Delivery rates from 1 µL/min • Solution phase & solid to 375 mL/min phase reaction systems • Single & Multi- • PC control of: position pumps - Reagent delivery - Temperature • PC & stand - Pressure alone operation • Custom designs • Deliver any volume from any syringe Reaction Block Systems • KEM-Lab Personal Reaction Blocks • Heat, cool, & refl ux • Multiple vial sizes • Custom designs • Multiple Temperature Zones Custom Robotic Workstations Robotic Solutions • Custom hardware and software • Weighing • Dissolution • Reformatting • Solid & Solution phase Synthesis • Cherry picking • Solid phase extraction User Programmable • All robots include the original source code - Endeavour Robots NEW Capping/Uncapping priced from $6000 Station Index Adapters, Thermocouple 39 Personal Reaction Station 16 Temperature
    [Show full text]