DOCSLIB.ORG

Lesson 4: What Are the Units for Measuring Radon?

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lesson 4: What Are the Units for Measuring Radon? Measuring radon in residential properties What are the units for measuring radon? Lesson 4: What are the units for Notes measuring radon? Lesson overview This lesson introduces the units used to measure radon. Lesson objectives By the end of this lesson, the learners will be able to: • Identify three units used to measure radon and radon decay products in homes • List the EPA action levels for the three units used to measure radon and radon decay products in homes • Identify four factors that may affect measurements of radon decay products In this lesson, we are going to talk about the units that we use to measure radon. See slide 4­1. First, we’ll talk briefly about measuring radioactivity, or the number of radioactive decays over a given period of time. The important unit here is the picocurie, which equals • 0.037 decays per second • 1 decay every 27 seconds • 2.22 decays per minute See slide 4­2. When we measure radon gas, we consider the activity (the number of decays per minute) for a given volume of air (one liter). A liter is a little larger than a quart. So 1 pCi/L = 2.22 decays/minute/liter Remember the EPA action level for radon: 4 pCi/L. What does the EPA action level represent in terms of radioactive decays per time and volume? Correct answer: EPA action level = 4 pCi/L = 8.88 decays/minute/liter. Lesson 4­1 Measuring radon in residential properties What are the units for measuring radon? See slide 4­3. Notes Assume that a client spent 10 hours/day (perhaps sleeping for 8 hours and watching TV for 2 hours) in a room that had a radon level of 4 pCi/L. How many decays/liter would the client be exposed to each day? Answer: 5,328 days/day/liter. See slide 4­4. This slide illustrates the average exposure to radiation in the United States. As you can see, radon accounts for more exposure than any other single source. See slide 4­5. Another method of measuring radioactivity, often used outside the United States, uses units called becquerels. A becquerel equals 1 decay per second. Since a picocurie equals one decay every 27 seconds, one becquerel also equals 27 picocuries. And since one picocurie equals 0.037 decays/second, one picocurie also equals 0.037 becquerels. Like picocuries, becquerels measure activity. To measure radon gas, we use activity (becquerels) for a given volume of air (in this case, a cubic meter, not a liter). A cubic meter equals 1000 liters. When we do the math, we find: One picocurie per liter of radon equals 37 becquerels per cubic meter. Consider. Again, let’s consider the EPA action level for radon. How would you represent it in becquerels? Correct answer: EPA action level = 4 x 37 Bq/m 3 = 148 Bq/ m 3 See slide 4­6. So far, we’ve been talking about how to measure radon gas alone. However, earlier we explained that radon decay products (RDPs) Lesson 4­2 Measuring radon in residential properties What are the units for measuring radon? also contribute to health risks. In fact, the term radon sometimes Notes refers broadly to both radon and its decay products. In particular, we measure the alpha radiation emitted by the four short­lived radon decay products: • Polonium­218 • Lead­214 • Bismuth­214 • Polonium­214 See slide 4­7. We measure the radiation from radon decay products differently. For RDPs, we generally use a unit called the working level (WL). There are several ways to define the working level. • One WL is the concentration of RDPs produced from one liter of air that contains 100 pCi/L of radon. • One WL is the amount of short­lived radon progeny that exists at a single moment if a container is kept at a constant 100 pCi/L. The equivalent of the EPA action level of 4 pCi/L is 0.02 WL. See slide 4­8. In summary, we can express the EPA action level for radon in three forms: • 4 pCi/L • 148 Bq/m 3 • 0.02 WL As a practical matter, the form we use most often is 4 pCi/L. See slide 4­9. Consider. Are there any questions so far? See slide 4­10. Several factors can raise or lower the concentration of radon and RDPs that can be measured. • Some radon gas and RDPs naturally escape as air flows out of the home. Lesson 4­3 Measuring radon in residential properties What are the units for measuring radon? As we noted earlier, unlike radon gas, radon decay products are Notes • Solid particles • Electrically charged • Chemically reactive These characteristics determine how RDPs behave and how they are measured. • Some RDPs attach to (or plate out on) solid objects, such as walls, floors, ceilings, and furniture. • Plating out lowers their concentration in the air. • Plated­out RDPs cannot be measured. o Only the RDPs that remain in the air can be measured. o Therefore, factors that affect plating out also affect the measurement of RDPs. See slide 4­11. Among the factors that we need to consider are • Air circulation • Ventilation • Air filters • Particles suspended in the air. See slide 4­12. Let’s first consider air circulation (that is, moving around the air that is already within a room). For example, fans increase normal air circulation. Consider. How do you think air circulation would affect the concentration of RDPs? Correct answer: • Circulation, or moving air, may increase plating out, as RDP particles blow toward solid objects and attach to them. • When plating out increases, the concentration of RDPs in the air decreases. See slide 4­13. Lesson 4­4 Measuring radon in residential properties What are the units for measuring radon? We said that circulation refers to moving around air that is already Notes in the space. In contrast, ventilation refers to a supply of fresh air. Open windows and doors increase ventilation. Consider. What effect do you think ventilation would have on the concentration of RDPs? Correct answer: Again, ventilation is likely to lower the concentration of RDPs. It may also reduce the concentration of radon, as the gas escapes from the home. See slide 4­14. Another factor that affects the concentration of RDPs is an air filter—in a furnace, for example. Consider. How do you think an air filter would affect the concentration of RDPs? Correct answer: A filter might remove some RDPs, which are charged particles that are chemically active. A filter would not remove radon gas itself, which has no electrical charge and is not chemically active. Thus, a filter would lower the concentration of RDPs. See slide 4­15. Consider. What effect do you think particles suspended in the air (such as dust, smoke, and aerosols) might have? Correct answer: When there are particles in the air, RDPs are more likely to attach to these particles. Thus the RDP concentration in the air is likely to decrease. Lesson 4­5 Measuring radon in residential properties What are the units for measuring radon? See slide 4­16. Notes As you see, air circulation, ventilation, air filters, and particles in the air can all affect radon measurement. We’ll see the importance of these factors again when we discuss the conditions that are needed to measure radon during short­term tests. See slide 4­17. Earlier, when we described radon, we said that over time, radon decays into various short­lived radon decay products. In a closed system, like a closed home, the concentration of RDPs in the house increases until a situation called secular equilibrium is reached. (In this term, secular means eventual.) Secular equilibrium occurs when the radon decay products have the same level of radioactivity as the radon itself. In other words, the rate of decay of each short­lived RDP will equal the rate of decay of the radon itself. Achieving secular equilibrium takes about 3 to 4 hours. You will need to measure radon in a home after it has reached secular equilibrium. When we talk about the necessary conditions for short­ term testing, you’ll see that these conditions reflect the time needed to achieve secular equilibrium. See slide 4­18. This slide is intended as a little light relief and as a reminder of why the information in this section is important. See handout 4­1. Handout 4­1 summarizes this section on the units we use to measure radon and its decay products. Summary. See slide 4­22. Let’s review the units for measuring radon and radon decay products: • Picocuries/liter • Becquerels/cubic meter • Working levels Consider. Lesson 4­6 Measuring radon in residential properties What are the units for measuring radon? Notes What are the EPA action levels for these methods of measurement? Correct numbers: • 4 pCi/l • 148 Bq/m 3 • 0.02 WL See slide 4­23. We also talked about factors that affect the measurement of radon and radon decay products, including • Air circulation • Ventilation • Air filters • Particles in the air These factors are important when we consider the conditions necessary for testing a home. See slide 4­24. Consider. Do you have any questions about the units for measuring radon? See slide 4­25. Check comprehension. See handout 4­2A. This comprehension check is not graded. Now you’re going to see whether you remember the main points that we’ve discussed in this lesson. Please answer the questions on handout 4­2A. When you all finish, we’ll review the answers together. Review the answers.
Load more

Recommended publications
  • Uranium Fact Sheet
    Fact Sheet Adopted: December 2018 Health Physics Society Specialists in Radiation Safety 1 Uranium What is uranium? Uranium is a naturally occurring metallic element that has been present in the Earth’s crust since formation of the planet. Like many other minerals, uranium was deposited on land by volcanic action, dissolved by rainfall, and in some places, carried into underground formations. In some cases, geochemical conditions resulted in its concentration into “ore bodies.” Uranium is a common element in Earth’s crust (soil, rock) and in seawater and groundwater. Uranium has 92 protons in its nucleus. The isotope2 238U has 146 neutrons, for a total atomic weight of approximately 238, making it the highest atomic weight of any naturally occurring element. It is not the most dense of elements, but its density is almost twice that of lead. Uranium is radioactive and in nature has three primary isotopes with different numbers of neutrons. Natural uranium, 238U, constitutes over 99% of the total mass or weight, with 0.72% 235U, and a very small amount of 234U. An unstable nucleus that emits some form of radiation is defined as radioactive. The emitted radiation is called radioactivity, which in this case is ionizing radiation—meaning it can interact with other atoms to create charged atoms known as ions. Uranium emits alpha particles, which are ejected from the nucleus of the unstable uranium atom. When an atom emits radiation such as alpha or beta particles or photons such as x rays or gamma rays, the material is said to be undergoing radioactive decay (also called radioactive transformation).
    [Show full text]
  • Measuring Radioactivity
    Health Physics Society Public Education Committee Fact Sheet MEASURING RADIOACTIVITY Because ionizing radiation cannot be detected with our human senses, we use various types of instruments and radiation detectors to measure the amount of radiation present. We usually measure both the amount of radioactivity in a radioisotope source, and the ionizing radiation field density being emitted by the source. We define radioactivity as the number of atoms which decay (disintegrate) in a radioisotope sample in a given period of time. The base unit is the Becquerel (Bq) or one disintegration per second (dps). This number is very small and therefore, not very useful. For this reason we use the Curie (Ci) which is 37 billion Bq. Because we often use very large or very small numbers when discussing radioactivity, we use a series o f prefixes which express multiples of 1000. The following table shows some of these prefixes: milli (m) = 1/1,000 kilo (k) = times 1,000 micro (u) = 1/1,000,000 mega (M) = times 1,000,000 nano (n) 1/1,000,000,000 giga (G) times 1,000,000,000 Pico (P) 1/1,000,000,000,000 tera (T) times 1,000,000,000,000 Using the table, a mCi = 1/1000 of a Curie and a GBq 1,000,000,000 Becquerels. To put this in perspective, a normal home smoke detector contains a small sealed source of about 10 uCi (370,000 Bq) of radioactivity. Ionizing radiation fields are expressed in units of Roentgens (R) which is equivalent to the number of atoms of a gas which are ionized.
    [Show full text]
  • Laboratoire National Henri Becquerel Ccri(I)/01-05 Dimri/Lnhb/Bc/01-146 30/03/01
    BUREAU NATIONAL DE MÉTROLOGIE COMMISSARIAT À L'ÉNERGIE ATOMIQUE LABORATOIRE NATIONAL HENRI BECQUEREL CCRI(I)/01-05 DIMRI/LNHB/BC/01-146 30/03/01 BUREAU NATIONAL DE METROLOGIE Laboratoire National Henri Becqurel (BNM-LNHB) Laboratoire Central des Industries Electriques (BNM-LCIE) DOSIMETRY OF PHOTONS AND CHARGED PARTICLES Progress Report 2000-2001 B.Chauvenet Participation in the CCRI K4 key comparison on calibration factors of ionisation chambers in terms of absorbed dose to water for 60Co photons Comparison of standards of absorbed dose to water for high-energy photon beams with METAS A comparison was carried out with METAS in October 2000. This comparison dealt with air kerma and absorbed dose to water standards in 60Co beams, and absorbed dose to water standards for high-energy x rays from accelerators (6 MV, 12 MV and 20 MV). The comparison was carried out in BNM-LNHB beams (60Co and Saturne 43 accelerator), with transfer chambers from METAS. Results are under analysis. Comparison of standards of absorbed dose to water for high-energy photon beams with NRC This comparison was carried out in October 1998. The results were discussed and analysed, and will be presented in a paper which has been submitted to “Physics in Medicine and Biology”. EUROMET projects Participation in EUROMET Contact Persons meetings for the preparation of CMC tables. The laboratory will participate in the proposed project of METAS on quality factors for high-energy photon beams. Absorbed dose to graphite by calorimetry The realisation of a new graphite calorimeter is under study to replace the present one built in 1984.
    [Show full text]
  • Radiation Glossary
    Radiation Glossary Activity The rate of disintegration (transformation) or decay of radioactive material. The units of activity are Curie (Ci) and the Becquerel (Bq). Agreement State Any state with which the U.S. Nuclear Regulatory Commission has entered into an effective agreement under subsection 274b. of the Atomic Energy Act of 1954, as amended. Under the agreement, the state regulates the use of by-product, source, and small quantities of special nuclear material within said state. Airborne Radioactive Material Radioactive material dispersed in the air in the form of dusts, fumes, particulates, mists, vapors, or gases. ALARA Acronym for "As Low As Reasonably Achievable". Making every reasonable effort to maintain exposures to ionizing radiation as far below the dose limits as practical, consistent with the purpose for which the licensed activity is undertaken. It takes into account the state of technology, the economics of improvements in relation to state of technology, the economics of improvements in relation to benefits to the public health and safety, societal and socioeconomic considerations, and in relation to utilization of radioactive materials and licensed materials in the public interest. Alpha Particle A positively charged particle ejected spontaneously from the nuclei of some radioactive elements. It is identical to a helium nucleus, with a mass number of 4 and a charge of +2. Annual Limit on Intake (ALI) Annual intake of a given radionuclide by "Reference Man" which would result in either a committed effective dose equivalent of 5 rems or a committed dose equivalent of 50 rems to an organ or tissue. Attenuation The process by which radiation is reduced in intensity when passing through some material.
    [Show full text]
  • Pci/L to Bq/M3
    Canadian Radon Program - Measurement Differences between the Canadian and U.S. Programs • Consumer Guidance • Units of Measure • Large Buildings Center for Environmental Research and Technology, Inc. © 2013 Mitigation differences addressed in another course CERTI© Canadian Guidance Health Risk Estimates Distribution CERTI© Center for Environmental Research & Technology, Inc. www.certi.us • 719-632-1215 Copyright © CERTI 2013 1 Canadian Radon Guidance for Dwellings Current Guidance: 200 Bq/M3 of Radon Federal Provincial Territorial Radiation Protection Committee – October 2006 Government of Canada – June 9, 2007 Previous Guidance: 800 Bq/M3 of Radon CERTI© Canadian Radon Levels Situation Current Average Outdoor Radon Levels 10 Bq/M3 Geometric Mean of Indoor Levels 41.9 Bq/M3 Level to which most homes can be mitigated 75 Bq/M3 % Homes Above 200 Bq/M3 (Population Weighted) 6.9% Previously was 3.3% References 1. Radon A Guide for Canadian Homeowners 2. Cross-Canada Survey of Radon Concentrations in Homes March 2012 http://www.hc-sc.gc.ca/ewh-semt/alt_formats/pdf/radiation/radon/survey-sondage-eng.pdf CERTI© Center for Environmental Research & Technology, Inc. www.certi.us • 719-632-1215 Copyright © CERTI 2013 2 Canadian Incidence by Province Cross-Canada Survey of Radon Concentrations in Homes March 2012 13,976 homes http://www.hc-sc.gc.ca/ewh-semt/alt_formats/pdf/radiation/radon/survey-sondage-eng.pdf % of Homes Above 200 Bq/M3 by Province 25.0% 20.6% 20.0% 19.4% 19.6% 15.7% 15.0% 10.7% 10.0% 8.2% 6.9% 5.7% 5.1% 5.4% 4.6% 5.0% 3.9% 3.5%
    [Show full text]
  • The Fantastic Family Becquerel the Radiant
    art & radiation exhibition entitled “Did you say Radiation The Fantastic Family Protection? Stories of X-rays, radioactivity, the etc.” is an absorbing display of artistic Becquerel interpretations of the concepts of radiation and radiation This work pays tribute to a dynasty of great minds, the protection. Dealing with a complex subject, the artists Becquerels: Antoine Cesar, the grandfather; Edmond, the entice the audience to formulate new opinions about radiation protection through their works. father; Henri, the son; all renowned physicists. It is a special tribute to Henri Becquerel who, following in his father’s foot- The exhibits stimulate visitors to interact with these steps, became France’s expert on luminescence. scientific concepts at a sensorial level rather than rationally trying to explain them. As visitors are drawn through these displays, they are forced to confront these artworks Artist: Peter Keene engaging all their senses: touch, sight, hearing, smell and taste. The artists aim to educate the visitor about the key elements that surround the subject of radiation, such as the difference between X-rays and radioactivity, the context in which radiation was discovered, the hazard it poses and how to protect one self from it. This combination of science and art is a travelling exhibition co-produced by the Institute for Radiation Protection and Nuclear Safety (France), Montbéliard Science Pavilion (France) and the Pays de Montbéliard Metropolitan Region (France); The Curie Museum (Paris), the Röntgen Museum (Remscheid, Germany) and the Deutsches Museum- (Munich, Germany), also contributed to the exhibition. The exhibition travelled around France, then to Buenos Aires, Argentina. In the future it is schedule to go on display The Radiant One in Lusanne, Switzerland (late 2009-early 2010) and Helsiniki, A mysterious vessel in the shape of an atom-smasher Finland (2010), before returning to France.
    [Show full text]
  • Antoine H. Becquerel
    A N T O I N E H . B E C Q U E R E L On ra dioactivity, a ne w pro perty of matter Nobel Lect ure, Dece mber 11, 1 9 0 3 T h e s u bj e ct w hi c h I pr o p os e t o s p e a k t o y o u a b o ut h as b e c o m e, i n o nl y a f e w y e ars, s o v ast t h at i n or d er t o d e al wit h it i n a si n gl e le ct ur e I s h o ul d have to confine myself to listing the main facts follo wing the chronological or der of their discovery. But as M. an d M me. Curie are to describe to you t h eir fi n e w or k o n r a di u m, I will si m pl y s u m m ari z e t h e s u bj e ct a n d gi v e so me acco u nt of my o w n researc h. At the beginning of 1896, on the very day that ne ws reache d Paris of the ex peri ments of Röntgen an d of the extraor dinary pro perties of the rays e mit- te d by the phos phorescent walls of Crookes’ t ubes, I tho ught of carrying o ut researc h to see w het her all p hos p horesce nt material e mitte d si milar rays.
    [Show full text]
  • Concepts of Radioactivity
    APPENDIX B Concepts of Radioactivity This section introduces some of the basic concepts of radioactivity to provide the general reader with a basic understanding of the radiological information in the Site Environmental Report. The defi nitions of commonly used radiological terms are found in the Technical Topics section of the glossary, Appendix A, and are indicated in bold-face type the fi rst time they are used only when the defi nition in the glossary provides additional detail. Included here, in Appendix B, are discussions of the analyses used to quantify radioactive material, the common sources of radioactivity in the environment, and how radiation sources contribute to radiation dose. Some general statistical concepts are also presented, along with a discussion of radionuclides of environmental interest at BNL. The discussion begins with some defi nitions and background information on scientifi c notation, numerical prefi xes, and units used when measuring dose and radioactivity. RADIOACTIVITY AND OTHER TERMS in the standard Periodic Table of the Elements. The atom is the basic constituent of all mat- This type of abbreviation is used in many of the ter and is one of the smallest units into which SER data tables and text. matter can be divided. Each atom is composed of a tiny central core of particles (protons and SCIENTIFIC NOTATION neutrons) that comprise the nucleus, surrounded Most numbers used for measurement and by a cloud of negatively charged particles quantifi cation in the SER are either very large or called electrons. Some atoms possess excess very small, and many zeroes would be required energy, causing them to be physically unstable.
    [Show full text]
  • What Is Radioactive Decay?
    What is Radioactive Decay? Professional Personnel January 2003 Fact Sheet #8A Division of Environmental Health Office of Radiation Protection RADIOACTIVE DECAY The atomic structure for certain isotopes of elements is unstable. Radioactivity is the natural and spontaneous process by which the unstable atoms of an isotope of an element transform or decay to a different state, and emit or radiate excess energy in the form of particles or waves called radiation. These emissions are energetic enough to ionize atoms and are called ionizing radiation. Depending on how the nucleus releases this excess energy, either a lower energy atom of the same form results or a completely different nucleus and atom are formed. The unstable atoms of a radioactive substance decay in a random fashion but at a characteristic rate. The length of time this takes, the number of steps required and the kinds of radiation released at each step are well known and are unique to that isotope. For instance, an atom of phosphorus-32 decays to an atom of non-radioactive sulfur-32, accompanied by the emission of a beta particle (electron) with an energy up to 1.71 million electron-volts (MeV). DECAY Most nuclear decays occur spontaneously and randomly, where a given fraction of atoms decay in a known given time period, independent of the number of atoms present. The change, due to decay, in the number of atoms, dN, during the time period, dt, is expressed as: dN - = lN dt This equation can be solved to form the following equation: - lt N(t) = N 0e Where the number of atoms remaining (those that have not decayed) during a time period t is N(t), the original number of atoms present at the start of the time period is N0, and l is a proportionality constant known as the decay constant that equals 0.693/ t½.
    [Show full text]
  • Radiation: Units of Measure and Health Effects Gerald Gels Health Physicist Veridian Corporation Units of Measure
    Radiation: Units of Measure and Health Effects Gerald Gels Health Physicist Veridian Corporation Units of Measure • Traditional Unit 1 curie (Ci) = 3.7 x 1010 dps = 2.2 x 1012 dpm • Subunits 1 microcurie (µCi) = 1 x 10-6 Ci 1 picocurie (pCi) = 1 x 10-12 Ci • International System (SI) 1 becquerel (Bq) = 1 dps Ionization Density alpha m = 4; Z = +2 beta m = .0005; Z = -1 gamma m = 0; Z = 0 m = atomic mass units (amu) Z = electric charge units = ionizations roentgen (R): An amount of x- or gamma radiation that causes 1 esu (electrostatic unit) of charges due to ionization in 1 cc of air. Absorbed Dose The rad (r) [or Gray (Gy)] G. L. Gels The Roentgen (R) describes the radiation field (the agent); but, The rad (r) describes the effect in a medium. 1 rad = 100 ergs/gm 100 ergs of energy released per gram of medium a. applies to any medium (including air) b. applies to any type of radiation (not just photons) The Gray (Gy) = 100 rad (r) The rad is a medium-dependent quantity, and is very useful as an estimate of the effect of radiation in, say, tissue. However, it does not take into account the relative biological effects of different types of radiation. 1 rad = 0.87 R For air 1 rad = 0.98 R For soft tissue Dose Equivalent [rem or Seivert (Sv)] * Gamma rays have a much different biological effect than alpha particles * The Dose Equivalent modifies the absorbed dose (rad) by the relative biological effectiveness (or, Quality Factor, QF) of the radiation Radiation QF -rays X-rays } above .03 MeV 1 less than .03 MeV 1.7 Neutrons (thermal) 2 Neutrons (fast) Protons } 10 Alpha particles Heavy charged particles } 20 rem = rad x QF G.
    [Show full text]
  • SI Unit Conversion
    I. Introduction to SI Units SI (Systeme International) units comprise the primary measurement system for most countries. The system is also finding increasing use in the United States. State and federal regulatory agencies, including the U.S. Nuclear Regulatory Commission, have adopted SI units for radiation measurements; other agencies (e.g., the U.S. Department of Transportation) require their use. II. Common Radiological Unit Prefixes Submultiples Multiples m milli 10-3 thousandth k kilo 103 thousand μ micro 10-6 millionth M mega 106 million n nano 10-9 thousand millionth G giga 109 thousand million p pico 10-12 million millionth T tera 1012 million million III. Length 1 centimeter (cm) = 0.3937 in = .03287 ft 1 meter (m) = 100 cm = 39.37 in = 3.281 ft 1 inch (in) = 2.54 cm = 0.0254 m 1 foot (ft) = 30.48 cm = 0.3048 m IV. Activity The traditional unit is the Curie (Ci); the SI unit is the Becquerel (Bq) 1 Ci = 3.7 x 1010 Bq = 37 GBq 1 Bq = 1 disintegration per second = 2.7027 x 10-11 Ci or ≅ 27 pCi To convert Bq to Ci, divide the Bq figure by 37 x 109 (or multiply the Bq figure by 2.7027 x 10-11) To convert Ci to Bq, multiply the Ci figure by 37 x 109 OLD 1 pCi 27 pCi 1 nCi 27 nCi 1 μCi 27 μCi 1 mCi 27 mCi 1 Ci 27 Ci (Curie) NEW (becquerel) 37 mBq 1 Bq 37 Bq 1 kBq 37 kBq 1 MBq 37 MBq 1 GBq 37 GBq 1 TBq Examples: 9 mCi = 333 MBq = 0.333 GBq 10 mCi = 370 MBq = 0.37 GBq 44 mCi = 1628 MBq = 1.63 GBq 50 mCi = 1850 MBq = 1.85 GBq Table A Table B Curie Units Becquerel Units Curie Units Becquerel Units μCi kBq μCi MBq mCi MBq mCi GBq Ci GBq Ci TBq 0.1 3.7 50 1.85 0.25 9.25 60 2.22 0.5 18.5 100 3.7 0.75 27.75 200 7.4 1 37 250 9.25 2 74 500 18.5 3 111 800 29.6 5 185 1000 37 7 259 From Table B: 50 mCi = 1.85 GBq 10 370 3.7 MBq = 100 μCi 20 740 To convert from one unit to another, 25 925.
    [Show full text]
  • Ionizing Radiation—It's Everywhere!
    Ionizing Radiation It’s Everywhere! Roger Eckhardt Los Alamos Science Number 23 1995 It’s Everywhere! Roger Eckhardt e are surrounded and permeated by radiation—sunlight, radio and television waves, medical x rays, infrared Wradiation, and the vibrant colors of the rainbow, to name a few. Sunlight drives the wind and ocean currents and sustains life. Radio and television broadcasts inform and entertain us. X rays produce the images needed for medical diagnosis. Infrared radiation warms us and radiates back into space not only the energy brought to the Earth by sunlight but also the entropy produced by life and other processes on Earth. All societies, from the most primitive to the most technological, depend on these various fluxes of natural and artificial radiation. The dictionary defines radiation as “the emission and propagation of waves or particles,” or as “the propagating waves or particles them- selves, such as light, sound, radiant heat, or the particles emitted by radioactivity.” Such definitions neglect one of the most important characteristics of radiation, its energy. Ultimately, the energy carried by radiation is what makes it so useful to life and civilization. Because much of the radiation we encounter has relatively low energy, its effect on our bodies is benign. For example, radio waves pass through us with no perceptible effects to our health. However, for many people, the word radiation has a negative connotation—it’s linked strongly with danger to life. This association comes from focusing on the so-called nuclear radiations, which are highly energetic, and especially on those generated by the radioactive materials of nuclear weapons and nuclear power plants.
    [Show full text]