111-11ST(I)INS ACT 1964 . No. 51] PERTH
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
NDPSC Record of Reasons, Meeting 37, Feb 2003
National Drugs and Poisons Schedule Committee Record of the Reasons 37th Meeting 25-26 February 2003 The Record of the Reasons contains the basis of scheduling decisions and other outcomes arising from the meeting. Please note that the Record of the Reasons includes extracts from the NDPSC minutes which have been edited to remove confidential information. National Drugs and Poisons Schedule Committee Record of the Reasons Meeting 37 - February 2003 i TABLE OF CON TEN TS GLOSSARY.........................................................................................................................IV 2. PROPOSED CHANGES/ADDITIONS TO PARTS 1 TO 3 AND PART 5 OF THE STANDARD FOR THE UNIFORM SCHEDULING OF DRUGS AND POISONS. ........................9 2.1 SUSDP, PART 1 ..........................................................................................................9 2.2 SUSDP, PART 2 ..........................................................................................................9 2.3 SUSDP, PART 3 ..........................................................................................................9 2.3.1 Organotin Compounds...........................................................................................9 2.4.1 BORON TRIFLUORIDE, BIFLUORIDES AND HYDROSILICOFLUORIC ACID – APPENDIX F PART 3 ...9 AGRICULTURAL/VETERINARY, INDUSTRIAL AND DOMESTIC CHEMICALS.................. 11 3. MATTERS ARISING FROM THE MINUTES OF THE PREVIOUS MEETING (CONSIDERATION OF POST-MEETING SUBMISSIONS UNDER 42ZCZ)............................. -
Old Time Chemical Names
Old Time Chemical Names 1080------------------------------------------------Sodium fluroacetate 2-Propanone-------------------------------------Acetone Absinthe-------------------------------------------Distillate of worm wood Abstinthium--------------------------------------Distillate of worm wood Acarcia gum-------------------------------------Gum arabic Acetaldehyde------------------------------------Acetic aldehyde Acetate of alumina-----------------------------Aluminium acetate Acetate of ammonia---------------------------Ammonium acetate Acetate of amyl---------------------------------Amyl acetate Acetate of baryta-------------------------------Barium acetate Acetate of cobalt-------------------------------Cobalt acetate Acetate of copper------------------------------Copper acetate Acetate of ethyl---------------------------------Ethyl acetate Acetate of iron----------------------------------Iron acetate Acetate of lead----------------------------------Lead acetate Acetate of lime----------------------------------Calcium acetate Acetate of manganese------------------------Manganous acetate Acetate of oxide of ethyl---------------------Ethyl acetate Acetate of potassa-----------------------------Potassium acetate Acetate of potassium--------------------------Potassium acetate Acetate of protoxide of Manganese-------Manganous acetate Acetate of soda---------------------------------Sodium acetate Acetate of zinc----------------------------------Zinc acetate Acetic aid basic bismuth---------------------Bismuth subacetate CH3COOBiO Acetic -
Working with Hazardous Chemicals
A Publication of Reliable Methods for the Preparation of Organic Compounds Working with Hazardous Chemicals The procedures in Organic Syntheses are intended for use only by persons with proper training in experimental organic chemistry. All hazardous materials should be handled using the standard procedures for work with chemicals described in references such as "Prudent Practices in the Laboratory" (The National Academies Press, Washington, D.C., 2011; the full text can be accessed free of charge at http://www.nap.edu/catalog.php?record_id=12654). All chemical waste should be disposed of in accordance with local regulations. For general guidelines for the management of chemical waste, see Chapter 8 of Prudent Practices. In some articles in Organic Syntheses, chemical-specific hazards are highlighted in red “Caution Notes” within a procedure. It is important to recognize that the absence of a caution note does not imply that no significant hazards are associated with the chemicals involved in that procedure. Prior to performing a reaction, a thorough risk assessment should be carried out that includes a review of the potential hazards associated with each chemical and experimental operation on the scale that is planned for the procedure. Guidelines for carrying out a risk assessment and for analyzing the hazards associated with chemicals can be found in Chapter 4 of Prudent Practices. The procedures described in Organic Syntheses are provided as published and are conducted at one's own risk. Organic Syntheses, Inc., its Editors, and its Board of Directors do not warrant or guarantee the safety of individuals using these procedures and hereby disclaim any liability for any injuries or damages claimed to have resulted from or related in any way to the procedures herein. -
Pharmacy and Poisons (Third and Fourth Schedule Amendment) Order 2017
Q UO N T FA R U T A F E BERMUDA PHARMACY AND POISONS (THIRD AND FOURTH SCHEDULE AMENDMENT) ORDER 2017 BR 111 / 2017 The Minister responsible for health, in exercise of the power conferred by section 48A(1) of the Pharmacy and Poisons Act 1979, makes the following Order: Citation 1 This Order may be cited as the Pharmacy and Poisons (Third and Fourth Schedule Amendment) Order 2017. Repeals and replaces the Third and Fourth Schedule of the Pharmacy and Poisons Act 1979 2 The Third and Fourth Schedules to the Pharmacy and Poisons Act 1979 are repealed and replaced with— “THIRD SCHEDULE (Sections 25(6); 27(1))) DRUGS OBTAINABLE ONLY ON PRESCRIPTION EXCEPT WHERE SPECIFIED IN THE FOURTH SCHEDULE (PART I AND PART II) Note: The following annotations used in this Schedule have the following meanings: md (maximum dose) i.e. the maximum quantity of the substance contained in the amount of a medicinal product which is recommended to be taken or administered at any one time. 1 PHARMACY AND POISONS (THIRD AND FOURTH SCHEDULE AMENDMENT) ORDER 2017 mdd (maximum daily dose) i.e. the maximum quantity of the substance that is contained in the amount of a medicinal product which is recommended to be taken or administered in any period of 24 hours. mg milligram ms (maximum strength) i.e. either or, if so specified, both of the following: (a) the maximum quantity of the substance by weight or volume that is contained in the dosage unit of a medicinal product; or (b) the maximum percentage of the substance contained in a medicinal product calculated in terms of w/w, w/v, v/w, or v/v, as appropriate. -
Chemical Mechanical Planarization for Tungsten-Containing Substrates
(19) TZZ _ T (11) EP 2 779 217 A2 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: (51) Int Cl.: 17.09.2014 Bulletin 2014/38 H01L 21/321 (2006.01) C09G 1/02 (2006.01) (21) Application number: 14158825.1 (22) Date of filing: 11.03.2014 (84) Designated Contracting States: • Zhou, Hongjun AL AT BE BG CH CY CZ DE DK EE ES FI FR GB Chandler, AZ Arizona 85248 (US) GR HR HU IE IS IT LI LT LU LV MC MK MT NL NO • Lew, Blake J. PL PT RO RS SE SI SK SM TR Scottsdale, AZ Arizona 85251 (US) Designated Extension States: • Schlueter, James Allen BA ME Phoenix, AZ Arizona 85045 (US) •Schwartz,Jo- Ann Theresa (30) Priority: 12.03.2013 US 201361777165 P Fountain Hills, AZ Arizona 85268 (US) 27.12.2013 US 201314142087 (74) Representative: Beck Greener (71) Applicant: AIR PRODUCTS AND CHEMICALS, INC. Fulwood House Allentown, PA 18195-1501 (US) 12 Fulwood Place London WC1V 6HR (GB) (72) Inventors: • Shi, Xiaobo Chandler, AZ Arizona 85224 (US) (54) Chemical mechanical planarization for tungsten-containing substrates (57) Chemical mechanical polishing (CMP) compo- of piperazine derivatives, salts of cyanate, and combina- sitions for polishing tungsten or tungsten- containing sub- tions thereof; and a liquid carrier. Systems and processes strates comprise an abrasive, at least one solid catalyst, use the aqueous formulations for polishing tungsten or a chemical additive selected from the groups consisting tungsten-containing substrates. EP 2 779 217 A2 Printed by Jouve, 75001 PARIS (FR) EP 2 779 217 A2 Description BACKGROUND OF THE INVENTION 5 [0001] This invention relates generally to the chemical-mechanical planarization (CMP) of tungsten-containing sub- strates on semiconductor wafers. -
JOURNAL of SCIENCE Published on Tho First Day of October, January, April and July
IOWA STATE COLLEGE JOURNAL OF SCIENCE Published on tho first day of October, January, April and July. EDITORIAL BOARD EDITOR-IN-CHIEF, R. E. Buchanan. ASSOCIATE EDITORS: P. E. Brown, Secretary; C. J. Drake, A H. Fuller, I. E. Melhus, E. A. Benbrook, P. Mabel Nelson, V. E. Nelson. ADVISORY EDITORS: R. E. Buchanan, Chairman; C. J. Drake, E. W. Lind strom, I. E. Melhus, P. Mabel Nelson, 0. R. Sweeney. BUSINESS CoMMITTEE: P. E. Brown, Chairman; A.H. Fuller, V: E. Nelson, Jay W. Woodrow. All manuscripts submitted for publication should be addressed to R. E. Buchanan, Room 101 Science Building, Iowa State College, Ames, Iowa_ All remittances should be addressed to P_ E. Brown, Bus. Mgr., Room 25 Hall of Agriculture, Iowa State College, Ames, Iowa. Single Copies: One Dollar; Annual Sub-scription Three Dollars; In Canada, Three Dollars and a Quarter; Foreign, Thre€ Dollars and a Half. ,..· ... J.. .:·::: . ... • . ... Entered as seco1.<u class matter.. at. ...... the . 0I'ost. 0 i!JtJ;;,. Ames, Iowa. .-·:.. ....·:::: :.·. .. ... : : :. ··: : . : ·... : .... ·.. ··: .··.··.: ~ ·. ·.. · ..... .·. ... : . .. .·. ...... .·.... THE QUANTITATIVE DETERMINATION OF FORMIC ACID IN THE PRE:SENCE OF ACETIC ACID BY A CONDUCTOMETRIC TITRATION• BY EDMOND E. MOORE WITH ELLIS I. FULMER. From the laboratory of biophysical chemistry, Iowa State College. Accepted for publication Juiie 3, 1929. OUTLINE I. Introduction. II. Review of quantitative methods for the determination of formic acid. III. Theoretical discussion of conductometric titration. IV. Equipment and procedure. V. Experimental results. VI. The use of the curves and diagram in analysis. VII. Summary. VIII. Literature cited. I. INTRODUCTION Quantitative studies of the chemical activities of microorganisms are at present handicapped by the lack of adequate analytical methods. -
1274 Potassium Cyanate
Material Safety Data Sheet EMERGENCY NUMBERS: (USA) CHEMTREC : 1(800) 424-9300 (24hrs) (CAN) CANUTEC : 1(613) 996-6666 (24hrs) (USA) Anachemia : 1(518) 297-4444 (CAN) Anachemia : 1(514) 489-5711 WHMIS Protective Clothing TDG Road/Rail Not controlled under WHMIS (Canada). Not controlled under TDG (Canada). PIN: Not applicable. PG: Not applicable. Section I. Product Identification and Uses Product name POTASSIUM CYANATE CI# Not available. Chemical formula KCNO CAS# 590-28-3 Synonyms Aero cyanate, Potassium isocyanate, Cyanic acid Code AC-7613 potassium salt, AC-7613, 73232 Formula weight 81.12 Supplier Anachemia Canada. Supersedes 255 Norman. Lachine (Montreal), Que H8R 1A3 Material uses For laboratory use only. Section II. Ingredients Name CAS # % TLV 1) POTASSIUM CYANATE 590-28-3 >96 Not established by ACGIH Toxicity values of the POTASSIUM CYANATE: hazardous ingredients ORAL (LD50): Acute: 841 mg/kg (Mouse). 1500 mg/kg (Rat). INTRAPERITONEAL (LD50): Acute: 320 mg/kg (Mouse). Section III. Physical Data POTASSIUM CYANATE page 2/4 Physical state and Solid. (White crystalline powder.) appearance / Odor pH (1% soln/water) Not available. Odor threshold Not available. Percent volatile 0% at 21°C Freezing point Decomposes at 700°C. Boiling point Not applicable. Specific gravity 2.1 (Water = 1) Vapor density Not available. Vapor pressure Not available. Water/oil dist. coeff. Not available. Evaporation rate Not available. Solubility Easily soluble in cold water. Section IV. Fire and Explosion Data Flash point Not available. Flammable limits Not available. Auto-ignition temperature Not available. Fire degradation Oxides of carbon, potassium and nitrogen. Cyanides. products Fire extinguishing Use DRY chemical, carbon dioxide, foam or water spray. -
The Dynamics of Technological Innovation: the Case of the Pharmaceutical Industry
Research Policy 30Ž. 2001 535–588 www.elsevier.nlrlocatereconbase The dynamics of technological innovation: the case of the pharmaceutical industry Basil Achilladelis a,), Nicholas Antonakis b a 39, Ionias Street, Kifissia, Athens 14563, Greece b Ministry of DeÕelopment and UniÕersity of Athens, Athens Greece Received 9 April 1999; received in revised form 7 October 1999; accepted 18 January 2000 Abstract This is an empirical and historical study of the dynamics of technological innovationŽ. TI in the pharmaceutical industry from its establishment at the beginning of the 19th century to 1990. It is based on the identification and evaluation of the originality and commercial significance of 1736 product innovationsŽ. new medicines commercialized between 1800 and 1990, and on company economic data for the period 1950–1990. The study is presented in the framework of established macroeconomic theory of technical change. Applying both empirical and historical evidence, the study:Ž. a identifies the technological, social and economic driving forces for TI;Ž. b examines the relation between originality and market performance of medicinal innovations;Ž. c studies the mechanisms of the diffusion of medicinal technologies that led to the formation of five successive generations of drugsŽ long waves.Ž. ; d describes the structural changes forced on the pharmaceutical industry by the introduction and development of each successive generation of drugs;Ž. e provides evidence of the concentration of the innovative segment of the pharmaceutical industry among few large companies, which sustained high levels of growth and R&D expenditures by means of inhouse innovation, technological and therapeutic market specialization, and mergers and acquisitions of companies within and outside the pharmaceutical industry; andŽ. -
Chemical Names and CAS Numbers Final
Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number C3H8O 1‐propanol C4H7BrO2 2‐bromobutyric acid 80‐58‐0 GeH3COOH 2‐germaacetic acid C4H10 2‐methylpropane 75‐28‐5 C3H8O 2‐propanol 67‐63‐0 C6H10O3 4‐acetylbutyric acid 448671 C4H7BrO2 4‐bromobutyric acid 2623‐87‐2 CH3CHO acetaldehyde CH3CONH2 acetamide C8H9NO2 acetaminophen 103‐90‐2 − C2H3O2 acetate ion − CH3COO acetate ion C2H4O2 acetic acid 64‐19‐7 CH3COOH acetic acid (CH3)2CO acetone CH3COCl acetyl chloride C2H2 acetylene 74‐86‐2 HCCH acetylene C9H8O4 acetylsalicylic acid 50‐78‐2 H2C(CH)CN acrylonitrile C3H7NO2 Ala C3H7NO2 alanine 56‐41‐7 NaAlSi3O3 albite AlSb aluminium antimonide 25152‐52‐7 AlAs aluminium arsenide 22831‐42‐1 AlBO2 aluminium borate 61279‐70‐7 AlBO aluminium boron oxide 12041‐48‐4 AlBr3 aluminium bromide 7727‐15‐3 AlBr3•6H2O aluminium bromide hexahydrate 2149397 AlCl4Cs aluminium caesium tetrachloride 17992‐03‐9 AlCl3 aluminium chloride (anhydrous) 7446‐70‐0 AlCl3•6H2O aluminium chloride hexahydrate 7784‐13‐6 AlClO aluminium chloride oxide 13596‐11‐7 AlB2 aluminium diboride 12041‐50‐8 AlF2 aluminium difluoride 13569‐23‐8 AlF2O aluminium difluoride oxide 38344‐66‐0 AlB12 aluminium dodecaboride 12041‐54‐2 Al2F6 aluminium fluoride 17949‐86‐9 AlF3 aluminium fluoride 7784‐18‐1 Al(CHO2)3 aluminium formate 7360‐53‐4 1 of 75 Chemical Abstract Chemical Formula Chemical Name Service (CAS) Number Al(OH)3 aluminium hydroxide 21645‐51‐2 Al2I6 aluminium iodide 18898‐35‐6 AlI3 aluminium iodide 7784‐23‐8 AlBr aluminium monobromide 22359‐97‐3 AlCl aluminium monochloride -
Cyanate Formation Following 2-Chloroacrylonitrile Exposure and the Role of Cytochrome P-450 Paul Malichky
Duquesne University Duquesne Scholarship Collection Electronic Theses and Dissertations Spring 2011 Cyanate Formation Following 2-Chloroacrylonitrile Exposure and the Role of Cytochrome P-450 Paul Malichky Follow this and additional works at: https://dsc.duq.edu/etd Recommended Citation Malichky, P. (2011). Cyanate Formation Following 2-Chloroacrylonitrile Exposure and the Role of Cytochrome P-450 (Doctoral dissertation, Duquesne University). Retrieved from https://dsc.duq.edu/etd/860 This Immediate Access is brought to you for free and open access by Duquesne Scholarship Collection. It has been accepted for inclusion in Electronic Theses and Dissertations by an authorized administrator of Duquesne Scholarship Collection. For more information, please contact [email protected]. CYANATE FORMATION FOLLOWING 2-CHLOROACRYLONITRILE EXPOSURE AND THE ROLE OF CYTOCHROME P-450 A Dissertation Submitted to the Graduate School of Pharmaceutical Sciences Duquesne University In partial fulfillment of the requirements for the degree of Doctor of Philosophy By Paul Malichky March 2011 Copyright by Paul Malichky 2011 CYANATE FORMATION FOLLOWING 2-CHLOROACRYLONITRILE EXPOSURE AND THE ROLE OF CYTOCHROME P-450 By Paul Malichky Approved March 16, 2011 ________________________________ ________________________________ David A. Johnson, Ph.D. Paula Witt-Enderby, Ph.D. Dissertation Chairperson Professor of Pharmacology-Toxicology Associate Professor of Pharmacology- Graduate School of Pharmaceutical Toxicology Sciences Graduate School of Pharmaceutical Duquesne University, Pittsburgh, PA Sciences Duquesne University, Pittsburgh, PA ________________________________ ________________________________ Frederick W. Fochtman, Ph.D. Janet M. Mostowy, Ph.D. Director, Forensic Science and Law Vice President School of Natural and Environmental Product Safety & Regulatory Affairs Sciences Bayer Material Science, Pittsburgh, PA Duquesne University, Pittsburgh, PA ________________________________ ________________________________ J. -
United States Patent 19 11 Patent Number: 5,446,070 Mantelle (45) Date of Patent: "Aug
USOO544607OA United States Patent 19 11 Patent Number: 5,446,070 Mantelle (45) Date of Patent: "Aug. 29, 1995 54 COMPOST ONS AND METHODS FOR 4,659,714 4/1987 Watt-Smith ......................... 514/260 TOPCAL ADMNSTRATION OF 4,675,009 6/1987 Hymes .......... ... 604/304 PHARMACEUTICALLY ACTIVE AGENTS 4,695,465 9/1987 Kigasawa .............................. 424/19 4,748,022 5/1988 Busciglio. ... 424/195 75 Inventor: Juan A. Mantelle, Miami, Fla. 4,765,983 8/1988 Takayanagi. ... 424/434 4,789,667 12/1988 Makino ............ ... 514/16 73) Assignee: Nover Pharmaceuticals, Inc., Miami, 4,867,970 9/1989 Newsham et al. ... 424/435 Fla. 4,888,354 12/1989 Chang .............. ... 514/424 4,894,232 1/1990 Reul ............. ... 424/439 * Notice: The portion of the term of this patent 4,900,552 2/1990 Sanvordeker .... ... 424/422 subsequent to Aug. 10, 2010 has been 4,900,554 2/1990 Yanagibashi. ... 424/448 disclaimed. 4,937,078 6/1990 Mezei........... ... 424/450 Appl. No.: 112,330 4,940,587 7/1990 Jenkins ..... ... 424/480 21 4,981,875 l/1991 Leusner ... ... 514/774 22 Filed: Aug. 27, 1993 5,023,082 6/1991 Friedman . ... 424/426 5,234,957 8/1993 Mantelle ........................... 514/772.6 Related U.S. Application Data FOREIGN PATENT DOCUMENTS 63 Continuation-in-part of PCT/US92/01730, Feb. 27, 0002425 6/1979 European Pat. Off. 1992, which is a continuation-in-part of Ser. No. 0139127 5/1985 European Pat. Off. 813,196, Dec. 23, 1991, Pat. No. 5,234,957, which is a 0159168 10/1985 European Pat. -
United States Patent Office Patented Feb
3,235,519 United States Patent Office Patented Feb. 15, 1966 2 3,235,519 I have discovered that organic sulfonyl semicarbazides, SULFONY SEMICARBAZDES AS BELOWING like the parent sulfonyl hydrazides, decompose smoothly AGENTS FOR POLYMEREC MATERALS Byron A. Hunter, Woodbridge, Conn., assignor to United and controllably to produce nitrogen gas at elevated tem States Rubber Company, New York, N.Y., a corpora peratures. Further, I have discovered that my sulfonyl tion of New Jersey 5 Semicarbazide compounds produce more gas per unit No Drawing. Original application Dec. 31, 1959, Ser. weight than the sulfonyl hydrazides from which they are No. 863,129, now Patent No. 3,152,176, dated Oct. 6, derived. This is surprising in that the quantity of gas 1964. Divided and this application Oct. 31, 1963, Ser. produced by the new compounds exceeds the amount nor No. 320,523 mally to be expected as available nitrogen. I have dis 2 Claims. (CI. 260-2.5) 10 covered that carbon dioxide is produced in the decom This invention relates to the production of gas-expanded position of my semicarbazides as well as nitrogen gas. products with a new class of chemical blowing agents I have also observed that my sulfonyl semicarbazide denoted organic sulfonyl semicarbazides, and to certain compounds possess greater heat stability than the parent of them as new chemicals. sulfonyl hydrazides and can be heated to higher tempera The use of certain heat sensitive organic hydrazine 5 tures without danger of premature decomposition. For compounds as blowing agents is known. U.S. Patent No. tunately, the decomposition temperature of my preferred 2,626,933, dated January 27, 1953, to Friedrich Lober, sulfonyl semicarbazides lie in a range which permit their Max Bogemann, and Richard Wegler, discloses the use application as practical blowing agents in so-called "high of hydrazides of organic sulfonic acids for this purpose.